| /* | |
| * Copyright © 2014 Intel Corporation | |
| * | |
| * Permission is hereby granted, free of charge, to any person obtaining a | |
| * copy of this software and associated documentation files (the "Software"), | |
| * to deal in the Software without restriction, including without limitation | |
| * the rights to use, copy, modify, merge, publish, distribute, sublicense, | |
| * and/or sell copies of the Software, and to permit persons to whom the | |
| * Software is furnished to do so, subject to the following conditions: | |
| * | |
| * The above copyright notice and this permission notice (including the next | |
| * paragraph) shall be included in all copies or substantial portions of the | |
| * Software. | |
| * | |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR | |
| * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, | |
| * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL | |
| * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER | |
| * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING | |
| * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS | |
| * IN THE SOFTWARE. | |
| * | |
| * Authors: | |
| * Ben Widawsky <ben@bwidawsk.net> | |
| * Michel Thierry <michel.thierry@intel.com> | |
| * Thomas Daniel <thomas.daniel@intel.com> | |
| * Oscar Mateo <oscar.mateo@intel.com> | |
| * | |
| */ | |
| /** | |
| * DOC: Logical Rings, Logical Ring Contexts and Execlists | |
| * | |
| * Motivation: | |
| * GEN8 brings an expansion of the HW contexts: "Logical Ring Contexts". | |
| * These expanded contexts enable a number of new abilities, especially | |
| * "Execlists" (also implemented in this file). | |
| * | |
| * One of the main differences with the legacy HW contexts is that logical | |
| * ring contexts incorporate many more things to the context's state, like | |
| * PDPs or ringbuffer control registers: | |
| * | |
| * The reason why PDPs are included in the context is straightforward: as | |
| * PPGTTs (per-process GTTs) are actually per-context, having the PDPs | |
| * contained there mean you don't need to do a ppgtt->switch_mm yourself, | |
| * instead, the GPU will do it for you on the context switch. | |
| * | |
| * But, what about the ringbuffer control registers (head, tail, etc..)? | |
| * shouldn't we just need a set of those per engine command streamer? This is | |
| * where the name "Logical Rings" starts to make sense: by virtualizing the | |
| * rings, the engine cs shifts to a new "ring buffer" with every context | |
| * switch. When you want to submit a workload to the GPU you: A) choose your | |
| * context, B) find its appropriate virtualized ring, C) write commands to it | |
| * and then, finally, D) tell the GPU to switch to that context. | |
| * | |
| * Instead of the legacy MI_SET_CONTEXT, the way you tell the GPU to switch | |
| * to a contexts is via a context execution list, ergo "Execlists". | |
| * | |
| * LRC implementation: | |
| * Regarding the creation of contexts, we have: | |
| * | |
| * - One global default context. | |
| * - One local default context for each opened fd. | |
| * - One local extra context for each context create ioctl call. | |
| * | |
| * Now that ringbuffers belong per-context (and not per-engine, like before) | |
| * and that contexts are uniquely tied to a given engine (and not reusable, | |
| * like before) we need: | |
| * | |
| * - One ringbuffer per-engine inside each context. | |
| * - One backing object per-engine inside each context. | |
| * | |
| * The global default context starts its life with these new objects fully | |
| * allocated and populated. The local default context for each opened fd is | |
| * more complex, because we don't know at creation time which engine is going | |
| * to use them. To handle this, we have implemented a deferred creation of LR | |
| * contexts: | |
| * | |
| * The local context starts its life as a hollow or blank holder, that only | |
| * gets populated for a given engine once we receive an execbuffer. If later | |
| * on we receive another execbuffer ioctl for the same context but a different | |
| * engine, we allocate/populate a new ringbuffer and context backing object and | |
| * so on. | |
| * | |
| * Finally, regarding local contexts created using the ioctl call: as they are | |
| * only allowed with the render ring, we can allocate & populate them right | |
| * away (no need to defer anything, at least for now). | |
| * | |
| * Execlists implementation: | |
| * Execlists are the new method by which, on gen8+ hardware, workloads are | |
| * submitted for execution (as opposed to the legacy, ringbuffer-based, method). | |
| * This method works as follows: | |
| * | |
| * When a request is committed, its commands (the BB start and any leading or | |
| * trailing commands, like the seqno breadcrumbs) are placed in the ringbuffer | |
| * for the appropriate context. The tail pointer in the hardware context is not | |
| * updated at this time, but instead, kept by the driver in the ringbuffer | |
| * structure. A structure representing this request is added to a request queue | |
| * for the appropriate engine: this structure contains a copy of the context's | |
| * tail after the request was written to the ring buffer and a pointer to the | |
| * context itself. | |
| * | |
| * If the engine's request queue was empty before the request was added, the | |
| * queue is processed immediately. Otherwise the queue will be processed during | |
| * a context switch interrupt. In any case, elements on the queue will get sent | |
| * (in pairs) to the GPU's ExecLists Submit Port (ELSP, for short) with a | |
| * globally unique 20-bits submission ID. | |
| * | |
| * When execution of a request completes, the GPU updates the context status | |
| * buffer with a context complete event and generates a context switch interrupt. | |
| * During the interrupt handling, the driver examines the events in the buffer: | |
| * for each context complete event, if the announced ID matches that on the head | |
| * of the request queue, then that request is retired and removed from the queue. | |
| * | |
| * After processing, if any requests were retired and the queue is not empty | |
| * then a new execution list can be submitted. The two requests at the front of | |
| * the queue are next to be submitted but since a context may not occur twice in | |
| * an execution list, if subsequent requests have the same ID as the first then | |
| * the two requests must be combined. This is done simply by discarding requests | |
| * at the head of the queue until either only one requests is left (in which case | |
| * we use a NULL second context) or the first two requests have unique IDs. | |
| * | |
| * By always executing the first two requests in the queue the driver ensures | |
| * that the GPU is kept as busy as possible. In the case where a single context | |
| * completes but a second context is still executing, the request for this second | |
| * context will be at the head of the queue when we remove the first one. This | |
| * request will then be resubmitted along with a new request for a different context, | |
| * which will cause the hardware to continue executing the second request and queue | |
| * the new request (the GPU detects the condition of a context getting preempted | |
| * with the same context and optimizes the context switch flow by not doing | |
| * preemption, but just sampling the new tail pointer). | |
| * | |
| */ | |
| #include <drm/drmP.h> | |
| #include <drm/i915_drm.h> | |
| #include "i915_drv.h" | |
| #include "intel_mocs.h" | |
| #define GEN9_LR_CONTEXT_RENDER_SIZE (22 * PAGE_SIZE) | |
| #define GEN8_LR_CONTEXT_RENDER_SIZE (20 * PAGE_SIZE) | |
| #define GEN8_LR_CONTEXT_OTHER_SIZE (2 * PAGE_SIZE) | |
| #define RING_EXECLIST_QFULL (1 << 0x2) | |
| #define RING_EXECLIST1_VALID (1 << 0x3) | |
| #define RING_EXECLIST0_VALID (1 << 0x4) | |
| #define RING_EXECLIST_ACTIVE_STATUS (3 << 0xE) | |
| #define RING_EXECLIST1_ACTIVE (1 << 0x11) | |
| #define RING_EXECLIST0_ACTIVE (1 << 0x12) | |
| #define GEN8_CTX_STATUS_IDLE_ACTIVE (1 << 0) | |
| #define GEN8_CTX_STATUS_PREEMPTED (1 << 1) | |
| #define GEN8_CTX_STATUS_ELEMENT_SWITCH (1 << 2) | |
| #define GEN8_CTX_STATUS_ACTIVE_IDLE (1 << 3) | |
| #define GEN8_CTX_STATUS_COMPLETE (1 << 4) | |
| #define GEN8_CTX_STATUS_LITE_RESTORE (1 << 15) | |
| #define CTX_LRI_HEADER_0 0x01 | |
| #define CTX_CONTEXT_CONTROL 0x02 | |
| #define CTX_RING_HEAD 0x04 | |
| #define CTX_RING_TAIL 0x06 | |
| #define CTX_RING_BUFFER_START 0x08 | |
| #define CTX_RING_BUFFER_CONTROL 0x0a | |
| #define CTX_BB_HEAD_U 0x0c | |
| #define CTX_BB_HEAD_L 0x0e | |
| #define CTX_BB_STATE 0x10 | |
| #define CTX_SECOND_BB_HEAD_U 0x12 | |
| #define CTX_SECOND_BB_HEAD_L 0x14 | |
| #define CTX_SECOND_BB_STATE 0x16 | |
| #define CTX_BB_PER_CTX_PTR 0x18 | |
| #define CTX_RCS_INDIRECT_CTX 0x1a | |
| #define CTX_RCS_INDIRECT_CTX_OFFSET 0x1c | |
| #define CTX_LRI_HEADER_1 0x21 | |
| #define CTX_CTX_TIMESTAMP 0x22 | |
| #define CTX_PDP3_UDW 0x24 | |
| #define CTX_PDP3_LDW 0x26 | |
| #define CTX_PDP2_UDW 0x28 | |
| #define CTX_PDP2_LDW 0x2a | |
| #define CTX_PDP1_UDW 0x2c | |
| #define CTX_PDP1_LDW 0x2e | |
| #define CTX_PDP0_UDW 0x30 | |
| #define CTX_PDP0_LDW 0x32 | |
| #define CTX_LRI_HEADER_2 0x41 | |
| #define CTX_R_PWR_CLK_STATE 0x42 | |
| #define CTX_GPGPU_CSR_BASE_ADDRESS 0x44 | |
| #define GEN8_CTX_VALID (1<<0) | |
| #define GEN8_CTX_FORCE_PD_RESTORE (1<<1) | |
| #define GEN8_CTX_FORCE_RESTORE (1<<2) | |
| #define GEN8_CTX_L3LLC_COHERENT (1<<5) | |
| #define GEN8_CTX_PRIVILEGE (1<<8) | |
| #define ASSIGN_CTX_PDP(ppgtt, reg_state, n) { \ | |
| const u64 _addr = i915_page_dir_dma_addr((ppgtt), (n)); \ | |
| reg_state[CTX_PDP ## n ## _UDW+1] = upper_32_bits(_addr); \ | |
| reg_state[CTX_PDP ## n ## _LDW+1] = lower_32_bits(_addr); \ | |
| } | |
| #define ASSIGN_CTX_PML4(ppgtt, reg_state) { \ | |
| reg_state[CTX_PDP0_UDW + 1] = upper_32_bits(px_dma(&ppgtt->pml4)); \ | |
| reg_state[CTX_PDP0_LDW + 1] = lower_32_bits(px_dma(&ppgtt->pml4)); \ | |
| } | |
| enum { | |
| ADVANCED_CONTEXT = 0, | |
| LEGACY_32B_CONTEXT, | |
| ADVANCED_AD_CONTEXT, | |
| LEGACY_64B_CONTEXT | |
| }; | |
| #define GEN8_CTX_ADDRESSING_MODE_SHIFT 3 | |
| #define GEN8_CTX_ADDRESSING_MODE(dev) (USES_FULL_48BIT_PPGTT(dev) ?\ | |
| LEGACY_64B_CONTEXT :\ | |
| LEGACY_32B_CONTEXT) | |
| enum { | |
| FAULT_AND_HANG = 0, | |
| FAULT_AND_HALT, /* Debug only */ | |
| FAULT_AND_STREAM, | |
| FAULT_AND_CONTINUE /* Unsupported */ | |
| }; | |
| #define GEN8_CTX_ID_SHIFT 32 | |
| #define CTX_RCS_INDIRECT_CTX_OFFSET_DEFAULT 0x17 | |
| static int intel_lr_context_pin(struct drm_i915_gem_request *rq); | |
| static void lrc_setup_hardware_status_page(struct intel_engine_cs *ring, | |
| struct drm_i915_gem_object *default_ctx_obj); | |
| /** | |
| * intel_sanitize_enable_execlists() - sanitize i915.enable_execlists | |
| * @dev: DRM device. | |
| * @enable_execlists: value of i915.enable_execlists module parameter. | |
| * | |
| * Only certain platforms support Execlists (the prerequisites being | |
| * support for Logical Ring Contexts and Aliasing PPGTT or better). | |
| * | |
| * Return: 1 if Execlists is supported and has to be enabled. | |
| */ | |
| int intel_sanitize_enable_execlists(struct drm_device *dev, int enable_execlists) | |
| { | |
| WARN_ON(i915.enable_ppgtt == -1); | |
| /* On platforms with execlist available, vGPU will only | |
| * support execlist mode, no ring buffer mode. | |
| */ | |
| if (HAS_LOGICAL_RING_CONTEXTS(dev) && intel_vgpu_active(dev)) | |
| return 1; | |
| if (INTEL_INFO(dev)->gen >= 9) | |
| return 1; | |
| if (enable_execlists == 0) | |
| return 0; | |
| if (HAS_LOGICAL_RING_CONTEXTS(dev) && USES_PPGTT(dev) && | |
| i915.use_mmio_flip >= 0) | |
| return 1; | |
| return 0; | |
| } | |
| /** | |
| * intel_execlists_ctx_id() - get the Execlists Context ID | |
| * @ctx_obj: Logical Ring Context backing object. | |
| * | |
| * Do not confuse with ctx->id! Unfortunately we have a name overload | |
| * here: the old context ID we pass to userspace as a handler so that | |
| * they can refer to a context, and the new context ID we pass to the | |
| * ELSP so that the GPU can inform us of the context status via | |
| * interrupts. | |
| * | |
| * Return: 20-bits globally unique context ID. | |
| */ | |
| u32 intel_execlists_ctx_id(struct drm_i915_gem_object *ctx_obj) | |
| { | |
| u32 lrca = i915_gem_obj_ggtt_offset(ctx_obj) + | |
| LRC_PPHWSP_PN * PAGE_SIZE; | |
| /* LRCA is required to be 4K aligned so the more significant 20 bits | |
| * are globally unique */ | |
| return lrca >> 12; | |
| } | |
| static bool disable_lite_restore_wa(struct intel_engine_cs *ring) | |
| { | |
| struct drm_device *dev = ring->dev; | |
| return ((IS_SKYLAKE(dev) && INTEL_REVID(dev) <= SKL_REVID_B0) || | |
| (IS_BROXTON(dev) && INTEL_REVID(dev) == BXT_REVID_A0)) && | |
| (ring->id == VCS || ring->id == VCS2); | |
| } | |
| uint64_t intel_lr_context_descriptor(struct intel_context *ctx, | |
| struct intel_engine_cs *ring) | |
| { | |
| struct drm_i915_gem_object *ctx_obj = ctx->engine[ring->id].state; | |
| uint64_t desc; | |
| uint64_t lrca = i915_gem_obj_ggtt_offset(ctx_obj) + | |
| LRC_PPHWSP_PN * PAGE_SIZE; | |
| WARN_ON(lrca & 0xFFFFFFFF00000FFFULL); | |
| desc = GEN8_CTX_VALID; | |
| desc |= GEN8_CTX_ADDRESSING_MODE(dev) << GEN8_CTX_ADDRESSING_MODE_SHIFT; | |
| if (IS_GEN8(ctx_obj->base.dev)) | |
| desc |= GEN8_CTX_L3LLC_COHERENT; | |
| desc |= GEN8_CTX_PRIVILEGE; | |
| desc |= lrca; | |
| desc |= (u64)intel_execlists_ctx_id(ctx_obj) << GEN8_CTX_ID_SHIFT; | |
| /* TODO: WaDisableLiteRestore when we start using semaphore | |
| * signalling between Command Streamers */ | |
| /* desc |= GEN8_CTX_FORCE_RESTORE; */ | |
| /* WaEnableForceRestoreInCtxtDescForVCS:skl */ | |
| /* WaEnableForceRestoreInCtxtDescForVCS:bxt */ | |
| if (disable_lite_restore_wa(ring)) | |
| desc |= GEN8_CTX_FORCE_RESTORE; | |
| return desc; | |
| } | |
| static void execlists_elsp_write(struct drm_i915_gem_request *rq0, | |
| struct drm_i915_gem_request *rq1) | |
| { | |
| struct intel_engine_cs *ring = rq0->ring; | |
| struct drm_device *dev = ring->dev; | |
| struct drm_i915_private *dev_priv = dev->dev_private; | |
| uint64_t desc[2]; | |
| if (rq1) { | |
| desc[1] = intel_lr_context_descriptor(rq1->ctx, rq1->ring); | |
| rq1->elsp_submitted++; | |
| } else { | |
| desc[1] = 0; | |
| } | |
| desc[0] = intel_lr_context_descriptor(rq0->ctx, rq0->ring); | |
| rq0->elsp_submitted++; | |
| /* You must always write both descriptors in the order below. */ | |
| spin_lock(&dev_priv->uncore.lock); | |
| intel_uncore_forcewake_get__locked(dev_priv, FORCEWAKE_ALL); | |
| I915_WRITE_FW(RING_ELSP(ring), upper_32_bits(desc[1])); | |
| I915_WRITE_FW(RING_ELSP(ring), lower_32_bits(desc[1])); | |
| I915_WRITE_FW(RING_ELSP(ring), upper_32_bits(desc[0])); | |
| /* The context is automatically loaded after the following */ | |
| I915_WRITE_FW(RING_ELSP(ring), lower_32_bits(desc[0])); | |
| /* ELSP is a wo register, use another nearby reg for posting */ | |
| POSTING_READ_FW(RING_EXECLIST_STATUS_LO(ring)); | |
| intel_uncore_forcewake_put__locked(dev_priv, FORCEWAKE_ALL); | |
| spin_unlock(&dev_priv->uncore.lock); | |
| } | |
| static int execlists_update_context(struct drm_i915_gem_request *rq) | |
| { | |
| struct intel_engine_cs *ring = rq->ring; | |
| struct i915_hw_ppgtt *ppgtt = rq->ctx->ppgtt; | |
| struct drm_i915_gem_object *ctx_obj = rq->ctx->engine[ring->id].state; | |
| struct drm_i915_gem_object *rb_obj = rq->ringbuf->obj; | |
| struct page *page; | |
| uint32_t *reg_state; | |
| BUG_ON(!ctx_obj); | |
| WARN_ON(!i915_gem_obj_is_pinned(ctx_obj)); | |
| WARN_ON(!i915_gem_obj_is_pinned(rb_obj)); | |
| page = i915_gem_object_get_page(ctx_obj, LRC_STATE_PN); | |
| reg_state = kmap_atomic(page); | |
| reg_state[CTX_RING_TAIL+1] = rq->tail; | |
| reg_state[CTX_RING_BUFFER_START+1] = i915_gem_obj_ggtt_offset(rb_obj); | |
| if (ppgtt && !USES_FULL_48BIT_PPGTT(ppgtt->base.dev)) { | |
| /* True 32b PPGTT with dynamic page allocation: update PDP | |
| * registers and point the unallocated PDPs to scratch page. | |
| * PML4 is allocated during ppgtt init, so this is not needed | |
| * in 48-bit mode. | |
| */ | |
| ASSIGN_CTX_PDP(ppgtt, reg_state, 3); | |
| ASSIGN_CTX_PDP(ppgtt, reg_state, 2); | |
| ASSIGN_CTX_PDP(ppgtt, reg_state, 1); | |
| ASSIGN_CTX_PDP(ppgtt, reg_state, 0); | |
| } | |
| kunmap_atomic(reg_state); | |
| return 0; | |
| } | |
| static void execlists_submit_requests(struct drm_i915_gem_request *rq0, | |
| struct drm_i915_gem_request *rq1) | |
| { | |
| execlists_update_context(rq0); | |
| if (rq1) | |
| execlists_update_context(rq1); | |
| execlists_elsp_write(rq0, rq1); | |
| } | |
| static void execlists_context_unqueue(struct intel_engine_cs *ring) | |
| { | |
| struct drm_i915_gem_request *req0 = NULL, *req1 = NULL; | |
| struct drm_i915_gem_request *cursor = NULL, *tmp = NULL; | |
| assert_spin_locked(&ring->execlist_lock); | |
| /* | |
| * If irqs are not active generate a warning as batches that finish | |
| * without the irqs may get lost and a GPU Hang may occur. | |
| */ | |
| WARN_ON(!intel_irqs_enabled(ring->dev->dev_private)); | |
| if (list_empty(&ring->execlist_queue)) | |
| return; | |
| /* Try to read in pairs */ | |
| list_for_each_entry_safe(cursor, tmp, &ring->execlist_queue, | |
| execlist_link) { | |
| if (!req0) { | |
| req0 = cursor; | |
| } else if (req0->ctx == cursor->ctx) { | |
| /* Same ctx: ignore first request, as second request | |
| * will update tail past first request's workload */ | |
| cursor->elsp_submitted = req0->elsp_submitted; | |
| list_del(&req0->execlist_link); | |
| list_add_tail(&req0->execlist_link, | |
| &ring->execlist_retired_req_list); | |
| req0 = cursor; | |
| } else { | |
| req1 = cursor; | |
| break; | |
| } | |
| } | |
| if (IS_GEN8(ring->dev) || IS_GEN9(ring->dev)) { | |
| /* | |
| * WaIdleLiteRestore: make sure we never cause a lite | |
| * restore with HEAD==TAIL | |
| */ | |
| if (req0->elsp_submitted) { | |
| /* | |
| * Apply the wa NOOPS to prevent ring:HEAD == req:TAIL | |
| * as we resubmit the request. See gen8_emit_request() | |
| * for where we prepare the padding after the end of the | |
| * request. | |
| */ | |
| struct intel_ringbuffer *ringbuf; | |
| ringbuf = req0->ctx->engine[ring->id].ringbuf; | |
| req0->tail += 8; | |
| req0->tail &= ringbuf->size - 1; | |
| } | |
| } | |
| WARN_ON(req1 && req1->elsp_submitted); | |
| execlists_submit_requests(req0, req1); | |
| } | |
| static bool execlists_check_remove_request(struct intel_engine_cs *ring, | |
| u32 request_id) | |
| { | |
| struct drm_i915_gem_request *head_req; | |
| assert_spin_locked(&ring->execlist_lock); | |
| head_req = list_first_entry_or_null(&ring->execlist_queue, | |
| struct drm_i915_gem_request, | |
| execlist_link); | |
| if (head_req != NULL) { | |
| struct drm_i915_gem_object *ctx_obj = | |
| head_req->ctx->engine[ring->id].state; | |
| if (intel_execlists_ctx_id(ctx_obj) == request_id) { | |
| WARN(head_req->elsp_submitted == 0, | |
| "Never submitted head request\n"); | |
| if (--head_req->elsp_submitted <= 0) { | |
| list_del(&head_req->execlist_link); | |
| list_add_tail(&head_req->execlist_link, | |
| &ring->execlist_retired_req_list); | |
| return true; | |
| } | |
| } | |
| } | |
| return false; | |
| } | |
| /** | |
| * intel_lrc_irq_handler() - handle Context Switch interrupts | |
| * @ring: Engine Command Streamer to handle. | |
| * | |
| * Check the unread Context Status Buffers and manage the submission of new | |
| * contexts to the ELSP accordingly. | |
| */ | |
| void intel_lrc_irq_handler(struct intel_engine_cs *ring) | |
| { | |
| struct drm_i915_private *dev_priv = ring->dev->dev_private; | |
| u32 status_pointer; | |
| u8 read_pointer; | |
| u8 write_pointer; | |
| u32 status = 0; | |
| u32 status_id; | |
| u32 submit_contexts = 0; | |
| status_pointer = I915_READ(RING_CONTEXT_STATUS_PTR(ring)); | |
| read_pointer = ring->next_context_status_buffer; | |
| write_pointer = status_pointer & GEN8_CSB_PTR_MASK; | |
| if (read_pointer > write_pointer) | |
| write_pointer += GEN8_CSB_ENTRIES; | |
| spin_lock(&ring->execlist_lock); | |
| while (read_pointer < write_pointer) { | |
| read_pointer++; | |
| status = I915_READ(RING_CONTEXT_STATUS_BUF_LO(ring, read_pointer % GEN8_CSB_ENTRIES)); | |
| status_id = I915_READ(RING_CONTEXT_STATUS_BUF_HI(ring, read_pointer % GEN8_CSB_ENTRIES)); | |
| if (status & GEN8_CTX_STATUS_IDLE_ACTIVE) | |
| continue; | |
| if (status & GEN8_CTX_STATUS_PREEMPTED) { | |
| if (status & GEN8_CTX_STATUS_LITE_RESTORE) { | |
| if (execlists_check_remove_request(ring, status_id)) | |
| WARN(1, "Lite Restored request removed from queue\n"); | |
| } else | |
| WARN(1, "Preemption without Lite Restore\n"); | |
| } | |
| if ((status & GEN8_CTX_STATUS_ACTIVE_IDLE) || | |
| (status & GEN8_CTX_STATUS_ELEMENT_SWITCH)) { | |
| if (execlists_check_remove_request(ring, status_id)) | |
| submit_contexts++; | |
| } | |
| } | |
| if (disable_lite_restore_wa(ring)) { | |
| /* Prevent a ctx to preempt itself */ | |
| if ((status & GEN8_CTX_STATUS_ACTIVE_IDLE) && | |
| (submit_contexts != 0)) | |
| execlists_context_unqueue(ring); | |
| } else if (submit_contexts != 0) { | |
| execlists_context_unqueue(ring); | |
| } | |
| spin_unlock(&ring->execlist_lock); | |
| WARN(submit_contexts > 2, "More than two context complete events?\n"); | |
| ring->next_context_status_buffer = write_pointer % GEN8_CSB_ENTRIES; | |
| I915_WRITE(RING_CONTEXT_STATUS_PTR(ring), | |
| _MASKED_FIELD(GEN8_CSB_PTR_MASK << 8, | |
| ((u32)ring->next_context_status_buffer & | |
| GEN8_CSB_PTR_MASK) << 8)); | |
| } | |
| static int execlists_context_queue(struct drm_i915_gem_request *request) | |
| { | |
| struct intel_engine_cs *ring = request->ring; | |
| struct drm_i915_gem_request *cursor; | |
| int num_elements = 0; | |
| if (request->ctx != ring->default_context) | |
| intel_lr_context_pin(request); | |
| i915_gem_request_reference(request); | |
| spin_lock_irq(&ring->execlist_lock); | |
| list_for_each_entry(cursor, &ring->execlist_queue, execlist_link) | |
| if (++num_elements > 2) | |
| break; | |
| if (num_elements > 2) { | |
| struct drm_i915_gem_request *tail_req; | |
| tail_req = list_last_entry(&ring->execlist_queue, | |
| struct drm_i915_gem_request, | |
| execlist_link); | |
| if (request->ctx == tail_req->ctx) { | |
| WARN(tail_req->elsp_submitted != 0, | |
| "More than 2 already-submitted reqs queued\n"); | |
| list_del(&tail_req->execlist_link); | |
| list_add_tail(&tail_req->execlist_link, | |
| &ring->execlist_retired_req_list); | |
| } | |
| } | |
| list_add_tail(&request->execlist_link, &ring->execlist_queue); | |
| if (num_elements == 0) | |
| execlists_context_unqueue(ring); | |
| spin_unlock_irq(&ring->execlist_lock); | |
| return 0; | |
| } | |
| static int logical_ring_invalidate_all_caches(struct drm_i915_gem_request *req) | |
| { | |
| struct intel_engine_cs *ring = req->ring; | |
| uint32_t flush_domains; | |
| int ret; | |
| flush_domains = 0; | |
| if (ring->gpu_caches_dirty) | |
| flush_domains = I915_GEM_GPU_DOMAINS; | |
| ret = ring->emit_flush(req, I915_GEM_GPU_DOMAINS, flush_domains); | |
| if (ret) | |
| return ret; | |
| ring->gpu_caches_dirty = false; | |
| return 0; | |
| } | |
| static int execlists_move_to_gpu(struct drm_i915_gem_request *req, | |
| struct list_head *vmas) | |
| { | |
| const unsigned other_rings = ~intel_ring_flag(req->ring); | |
| struct i915_vma *vma; | |
| uint32_t flush_domains = 0; | |
| bool flush_chipset = false; | |
| int ret; | |
| list_for_each_entry(vma, vmas, exec_list) { | |
| struct drm_i915_gem_object *obj = vma->obj; | |
| if (obj->active & other_rings) { | |
| ret = i915_gem_object_sync(obj, req->ring, &req); | |
| if (ret) | |
| return ret; | |
| } | |
| if (obj->base.write_domain & I915_GEM_DOMAIN_CPU) | |
| flush_chipset |= i915_gem_clflush_object(obj, false); | |
| flush_domains |= obj->base.write_domain; | |
| } | |
| if (flush_domains & I915_GEM_DOMAIN_GTT) | |
| wmb(); | |
| /* Unconditionally invalidate gpu caches and ensure that we do flush | |
| * any residual writes from the previous batch. | |
| */ | |
| return logical_ring_invalidate_all_caches(req); | |
| } | |
| int intel_logical_ring_alloc_request_extras(struct drm_i915_gem_request *request) | |
| { | |
| int ret; | |
| request->ringbuf = request->ctx->engine[request->ring->id].ringbuf; | |
| if (request->ctx != request->ring->default_context) { | |
| ret = intel_lr_context_pin(request); | |
| if (ret) | |
| return ret; | |
| } | |
| return 0; | |
| } | |
| static int logical_ring_wait_for_space(struct drm_i915_gem_request *req, | |
| int bytes) | |
| { | |
| struct intel_ringbuffer *ringbuf = req->ringbuf; | |
| struct intel_engine_cs *ring = req->ring; | |
| struct drm_i915_gem_request *target; | |
| unsigned space; | |
| int ret; | |
| if (intel_ring_space(ringbuf) >= bytes) | |
| return 0; | |
| /* The whole point of reserving space is to not wait! */ | |
| WARN_ON(ringbuf->reserved_in_use); | |
| list_for_each_entry(target, &ring->request_list, list) { | |
| /* | |
| * The request queue is per-engine, so can contain requests | |
| * from multiple ringbuffers. Here, we must ignore any that | |
| * aren't from the ringbuffer we're considering. | |
| */ | |
| if (target->ringbuf != ringbuf) | |
| continue; | |
| /* Would completion of this request free enough space? */ | |
| space = __intel_ring_space(target->postfix, ringbuf->tail, | |
| ringbuf->size); | |
| if (space >= bytes) | |
| break; | |
| } | |
| if (WARN_ON(&target->list == &ring->request_list)) | |
| return -ENOSPC; | |
| ret = i915_wait_request(target); | |
| if (ret) | |
| return ret; | |
| ringbuf->space = space; | |
| return 0; | |
| } | |
| /* | |
| * intel_logical_ring_advance_and_submit() - advance the tail and submit the workload | |
| * @request: Request to advance the logical ringbuffer of. | |
| * | |
| * The tail is updated in our logical ringbuffer struct, not in the actual context. What | |
| * really happens during submission is that the context and current tail will be placed | |
| * on a queue waiting for the ELSP to be ready to accept a new context submission. At that | |
| * point, the tail *inside* the context is updated and the ELSP written to. | |
| */ | |
| static void | |
| intel_logical_ring_advance_and_submit(struct drm_i915_gem_request *request) | |
| { | |
| struct intel_engine_cs *ring = request->ring; | |
| struct drm_i915_private *dev_priv = request->i915; | |
| intel_logical_ring_advance(request->ringbuf); | |
| request->tail = request->ringbuf->tail; | |
| if (intel_ring_stopped(ring)) | |
| return; | |
| if (dev_priv->guc.execbuf_client) | |
| i915_guc_submit(dev_priv->guc.execbuf_client, request); | |
| else | |
| execlists_context_queue(request); | |
| } | |
| static void __wrap_ring_buffer(struct intel_ringbuffer *ringbuf) | |
| { | |
| uint32_t __iomem *virt; | |
| int rem = ringbuf->size - ringbuf->tail; | |
| virt = ringbuf->virtual_start + ringbuf->tail; | |
| rem /= 4; | |
| while (rem--) | |
| iowrite32(MI_NOOP, virt++); | |
| ringbuf->tail = 0; | |
| intel_ring_update_space(ringbuf); | |
| } | |
| static int logical_ring_prepare(struct drm_i915_gem_request *req, int bytes) | |
| { | |
| struct intel_ringbuffer *ringbuf = req->ringbuf; | |
| int remain_usable = ringbuf->effective_size - ringbuf->tail; | |
| int remain_actual = ringbuf->size - ringbuf->tail; | |
| int ret, total_bytes, wait_bytes = 0; | |
| bool need_wrap = false; | |
| if (ringbuf->reserved_in_use) | |
| total_bytes = bytes; | |
| else | |
| total_bytes = bytes + ringbuf->reserved_size; | |
| if (unlikely(bytes > remain_usable)) { | |
| /* | |
| * Not enough space for the basic request. So need to flush | |
| * out the remainder and then wait for base + reserved. | |
| */ | |
| wait_bytes = remain_actual + total_bytes; | |
| need_wrap = true; | |
| } else { | |
| if (unlikely(total_bytes > remain_usable)) { | |
| /* | |
| * The base request will fit but the reserved space | |
| * falls off the end. So only need to to wait for the | |
| * reserved size after flushing out the remainder. | |
| */ | |
| wait_bytes = remain_actual + ringbuf->reserved_size; | |
| need_wrap = true; | |
| } else if (total_bytes > ringbuf->space) { | |
| /* No wrapping required, just waiting. */ | |
| wait_bytes = total_bytes; | |
| } | |
| } | |
| if (wait_bytes) { | |
| ret = logical_ring_wait_for_space(req, wait_bytes); | |
| if (unlikely(ret)) | |
| return ret; | |
| if (need_wrap) | |
| __wrap_ring_buffer(ringbuf); | |
| } | |
| return 0; | |
| } | |
| /** | |
| * intel_logical_ring_begin() - prepare the logical ringbuffer to accept some commands | |
| * | |
| * @req: The request to start some new work for | |
| * @num_dwords: number of DWORDs that we plan to write to the ringbuffer. | |
| * | |
| * The ringbuffer might not be ready to accept the commands right away (maybe it needs to | |
| * be wrapped, or wait a bit for the tail to be updated). This function takes care of that | |
| * and also preallocates a request (every workload submission is still mediated through | |
| * requests, same as it did with legacy ringbuffer submission). | |
| * | |
| * Return: non-zero if the ringbuffer is not ready to be written to. | |
| */ | |
| int intel_logical_ring_begin(struct drm_i915_gem_request *req, int num_dwords) | |
| { | |
| struct drm_i915_private *dev_priv; | |
| int ret; | |
| WARN_ON(req == NULL); | |
| dev_priv = req->ring->dev->dev_private; | |
| ret = i915_gem_check_wedge(&dev_priv->gpu_error, | |
| dev_priv->mm.interruptible); | |
| if (ret) | |
| return ret; | |
| ret = logical_ring_prepare(req, num_dwords * sizeof(uint32_t)); | |
| if (ret) | |
| return ret; | |
| req->ringbuf->space -= num_dwords * sizeof(uint32_t); | |
| return 0; | |
| } | |
| int intel_logical_ring_reserve_space(struct drm_i915_gem_request *request) | |
| { | |
| /* | |
| * The first call merely notes the reserve request and is common for | |
| * all back ends. The subsequent localised _begin() call actually | |
| * ensures that the reservation is available. Without the begin, if | |
| * the request creator immediately submitted the request without | |
| * adding any commands to it then there might not actually be | |
| * sufficient room for the submission commands. | |
| */ | |
| intel_ring_reserved_space_reserve(request->ringbuf, MIN_SPACE_FOR_ADD_REQUEST); | |
| return intel_logical_ring_begin(request, 0); | |
| } | |
| /** | |
| * execlists_submission() - submit a batchbuffer for execution, Execlists style | |
| * @dev: DRM device. | |
| * @file: DRM file. | |
| * @ring: Engine Command Streamer to submit to. | |
| * @ctx: Context to employ for this submission. | |
| * @args: execbuffer call arguments. | |
| * @vmas: list of vmas. | |
| * @batch_obj: the batchbuffer to submit. | |
| * @exec_start: batchbuffer start virtual address pointer. | |
| * @dispatch_flags: translated execbuffer call flags. | |
| * | |
| * This is the evil twin version of i915_gem_ringbuffer_submission. It abstracts | |
| * away the submission details of the execbuffer ioctl call. | |
| * | |
| * Return: non-zero if the submission fails. | |
| */ | |
| int intel_execlists_submission(struct i915_execbuffer_params *params, | |
| struct drm_i915_gem_execbuffer2 *args, | |
| struct list_head *vmas) | |
| { | |
| struct drm_device *dev = params->dev; | |
| struct intel_engine_cs *ring = params->ring; | |
| struct drm_i915_private *dev_priv = dev->dev_private; | |
| struct intel_ringbuffer *ringbuf = params->ctx->engine[ring->id].ringbuf; | |
| u64 exec_start; | |
| int instp_mode; | |
| u32 instp_mask; | |
| int ret; | |
| instp_mode = args->flags & I915_EXEC_CONSTANTS_MASK; | |
| instp_mask = I915_EXEC_CONSTANTS_MASK; | |
| switch (instp_mode) { | |
| case I915_EXEC_CONSTANTS_REL_GENERAL: | |
| case I915_EXEC_CONSTANTS_ABSOLUTE: | |
| case I915_EXEC_CONSTANTS_REL_SURFACE: | |
| if (instp_mode != 0 && ring != &dev_priv->ring[RCS]) { | |
| DRM_DEBUG("non-0 rel constants mode on non-RCS\n"); | |
| return -EINVAL; | |
| } | |
| if (instp_mode != dev_priv->relative_constants_mode) { | |
| if (instp_mode == I915_EXEC_CONSTANTS_REL_SURFACE) { | |
| DRM_DEBUG("rel surface constants mode invalid on gen5+\n"); | |
| return -EINVAL; | |
| } | |
| /* The HW changed the meaning on this bit on gen6 */ | |
| instp_mask &= ~I915_EXEC_CONSTANTS_REL_SURFACE; | |
| } | |
| break; | |
| default: | |
| DRM_DEBUG("execbuf with unknown constants: %d\n", instp_mode); | |
| return -EINVAL; | |
| } | |
| if (args->flags & I915_EXEC_GEN7_SOL_RESET) { | |
| DRM_DEBUG("sol reset is gen7 only\n"); | |
| return -EINVAL; | |
| } | |
| ret = execlists_move_to_gpu(params->request, vmas); | |
| if (ret) | |
| return ret; | |
| if (ring == &dev_priv->ring[RCS] && | |
| instp_mode != dev_priv->relative_constants_mode) { | |
| ret = intel_logical_ring_begin(params->request, 4); | |
| if (ret) | |
| return ret; | |
| intel_logical_ring_emit(ringbuf, MI_NOOP); | |
| intel_logical_ring_emit(ringbuf, MI_LOAD_REGISTER_IMM(1)); | |
| intel_logical_ring_emit(ringbuf, INSTPM); | |
| intel_logical_ring_emit(ringbuf, instp_mask << 16 | instp_mode); | |
| intel_logical_ring_advance(ringbuf); | |
| dev_priv->relative_constants_mode = instp_mode; | |
| } | |
| exec_start = params->batch_obj_vm_offset + | |
| args->batch_start_offset; | |
| ret = ring->emit_bb_start(params->request, exec_start, params->dispatch_flags); | |
| if (ret) | |
| return ret; | |
| trace_i915_gem_ring_dispatch(params->request, params->dispatch_flags); | |
| i915_gem_execbuffer_move_to_active(vmas, params->request); | |
| i915_gem_execbuffer_retire_commands(params); | |
| return 0; | |
| } | |
| void intel_execlists_retire_requests(struct intel_engine_cs *ring) | |
| { | |
| struct drm_i915_gem_request *req, *tmp; | |
| struct list_head retired_list; | |
| WARN_ON(!mutex_is_locked(&ring->dev->struct_mutex)); | |
| if (list_empty(&ring->execlist_retired_req_list)) | |
| return; | |
| INIT_LIST_HEAD(&retired_list); | |
| spin_lock_irq(&ring->execlist_lock); | |
| list_replace_init(&ring->execlist_retired_req_list, &retired_list); | |
| spin_unlock_irq(&ring->execlist_lock); | |
| list_for_each_entry_safe(req, tmp, &retired_list, execlist_link) { | |
| struct intel_context *ctx = req->ctx; | |
| struct drm_i915_gem_object *ctx_obj = | |
| ctx->engine[ring->id].state; | |
| if (ctx_obj && (ctx != ring->default_context)) | |
| intel_lr_context_unpin(req); | |
| list_del(&req->execlist_link); | |
| i915_gem_request_unreference(req); | |
| } | |
| } | |
| void intel_logical_ring_stop(struct intel_engine_cs *ring) | |
| { | |
| struct drm_i915_private *dev_priv = ring->dev->dev_private; | |
| int ret; | |
| if (!intel_ring_initialized(ring)) | |
| return; | |
| ret = intel_ring_idle(ring); | |
| if (ret && !i915_reset_in_progress(&to_i915(ring->dev)->gpu_error)) | |
| DRM_ERROR("failed to quiesce %s whilst cleaning up: %d\n", | |
| ring->name, ret); | |
| /* TODO: Is this correct with Execlists enabled? */ | |
| I915_WRITE_MODE(ring, _MASKED_BIT_ENABLE(STOP_RING)); | |
| if (wait_for_atomic((I915_READ_MODE(ring) & MODE_IDLE) != 0, 1000)) { | |
| DRM_ERROR("%s :timed out trying to stop ring\n", ring->name); | |
| return; | |
| } | |
| I915_WRITE_MODE(ring, _MASKED_BIT_DISABLE(STOP_RING)); | |
| } | |
| int logical_ring_flush_all_caches(struct drm_i915_gem_request *req) | |
| { | |
| struct intel_engine_cs *ring = req->ring; | |
| int ret; | |
| if (!ring->gpu_caches_dirty) | |
| return 0; | |
| ret = ring->emit_flush(req, 0, I915_GEM_GPU_DOMAINS); | |
| if (ret) | |
| return ret; | |
| ring->gpu_caches_dirty = false; | |
| return 0; | |
| } | |
| static int intel_lr_context_do_pin(struct intel_engine_cs *ring, | |
| struct drm_i915_gem_object *ctx_obj, | |
| struct intel_ringbuffer *ringbuf) | |
| { | |
| struct drm_device *dev = ring->dev; | |
| struct drm_i915_private *dev_priv = dev->dev_private; | |
| int ret = 0; | |
| WARN_ON(!mutex_is_locked(&ring->dev->struct_mutex)); | |
| ret = i915_gem_obj_ggtt_pin(ctx_obj, GEN8_LR_CONTEXT_ALIGN, | |
| PIN_OFFSET_BIAS | GUC_WOPCM_TOP); | |
| if (ret) | |
| return ret; | |
| ret = intel_pin_and_map_ringbuffer_obj(ring->dev, ringbuf); | |
| if (ret) | |
| goto unpin_ctx_obj; | |
| ctx_obj->dirty = true; | |
| /* Invalidate GuC TLB. */ | |
| if (i915.enable_guc_submission) | |
| I915_WRITE(GEN8_GTCR, GEN8_GTCR_INVALIDATE); | |
| return ret; | |
| unpin_ctx_obj: | |
| i915_gem_object_ggtt_unpin(ctx_obj); | |
| return ret; | |
| } | |
| static int intel_lr_context_pin(struct drm_i915_gem_request *rq) | |
| { | |
| int ret = 0; | |
| struct intel_engine_cs *ring = rq->ring; | |
| struct drm_i915_gem_object *ctx_obj = rq->ctx->engine[ring->id].state; | |
| struct intel_ringbuffer *ringbuf = rq->ringbuf; | |
| if (rq->ctx->engine[ring->id].pin_count++ == 0) { | |
| ret = intel_lr_context_do_pin(ring, ctx_obj, ringbuf); | |
| if (ret) | |
| goto reset_pin_count; | |
| } | |
| return ret; | |
| reset_pin_count: | |
| rq->ctx->engine[ring->id].pin_count = 0; | |
| return ret; | |
| } | |
| void intel_lr_context_unpin(struct drm_i915_gem_request *rq) | |
| { | |
| struct intel_engine_cs *ring = rq->ring; | |
| struct drm_i915_gem_object *ctx_obj = rq->ctx->engine[ring->id].state; | |
| struct intel_ringbuffer *ringbuf = rq->ringbuf; | |
| if (ctx_obj) { | |
| WARN_ON(!mutex_is_locked(&ring->dev->struct_mutex)); | |
| if (--rq->ctx->engine[ring->id].pin_count == 0) { | |
| intel_unpin_ringbuffer_obj(ringbuf); | |
| i915_gem_object_ggtt_unpin(ctx_obj); | |
| } | |
| } | |
| } | |
| static int intel_logical_ring_workarounds_emit(struct drm_i915_gem_request *req) | |
| { | |
| int ret, i; | |
| struct intel_engine_cs *ring = req->ring; | |
| struct intel_ringbuffer *ringbuf = req->ringbuf; | |
| struct drm_device *dev = ring->dev; | |
| struct drm_i915_private *dev_priv = dev->dev_private; | |
| struct i915_workarounds *w = &dev_priv->workarounds; | |
| if (WARN_ON_ONCE(w->count == 0)) | |
| return 0; | |
| ring->gpu_caches_dirty = true; | |
| ret = logical_ring_flush_all_caches(req); | |
| if (ret) | |
| return ret; | |
| ret = intel_logical_ring_begin(req, w->count * 2 + 2); | |
| if (ret) | |
| return ret; | |
| intel_logical_ring_emit(ringbuf, MI_LOAD_REGISTER_IMM(w->count)); | |
| for (i = 0; i < w->count; i++) { | |
| intel_logical_ring_emit(ringbuf, w->reg[i].addr); | |
| intel_logical_ring_emit(ringbuf, w->reg[i].value); | |
| } | |
| intel_logical_ring_emit(ringbuf, MI_NOOP); | |
| intel_logical_ring_advance(ringbuf); | |
| ring->gpu_caches_dirty = true; | |
| ret = logical_ring_flush_all_caches(req); | |
| if (ret) | |
| return ret; | |
| return 0; | |
| } | |
| #define wa_ctx_emit(batch, index, cmd) \ | |
| do { \ | |
| int __index = (index)++; \ | |
| if (WARN_ON(__index >= (PAGE_SIZE / sizeof(uint32_t)))) { \ | |
| return -ENOSPC; \ | |
| } \ | |
| batch[__index] = (cmd); \ | |
| } while (0) | |
| /* | |
| * In this WA we need to set GEN8_L3SQCREG4[21:21] and reset it after | |
| * PIPE_CONTROL instruction. This is required for the flush to happen correctly | |
| * but there is a slight complication as this is applied in WA batch where the | |
| * values are only initialized once so we cannot take register value at the | |
| * beginning and reuse it further; hence we save its value to memory, upload a | |
| * constant value with bit21 set and then we restore it back with the saved value. | |
| * To simplify the WA, a constant value is formed by using the default value | |
| * of this register. This shouldn't be a problem because we are only modifying | |
| * it for a short period and this batch in non-premptible. We can ofcourse | |
| * use additional instructions that read the actual value of the register | |
| * at that time and set our bit of interest but it makes the WA complicated. | |
| * | |
| * This WA is also required for Gen9 so extracting as a function avoids | |
| * code duplication. | |
| */ | |
| static inline int gen8_emit_flush_coherentl3_wa(struct intel_engine_cs *ring, | |
| uint32_t *const batch, | |
| uint32_t index) | |
| { | |
| uint32_t l3sqc4_flush = (0x40400000 | GEN8_LQSC_FLUSH_COHERENT_LINES); | |
| /* | |
| * WaDisableLSQCROPERFforOCL:skl | |
| * This WA is implemented in skl_init_clock_gating() but since | |
| * this batch updates GEN8_L3SQCREG4 with default value we need to | |
| * set this bit here to retain the WA during flush. | |
| */ | |
| if (IS_SKYLAKE(ring->dev) && INTEL_REVID(ring->dev) <= SKL_REVID_E0) | |
| l3sqc4_flush |= GEN8_LQSC_RO_PERF_DIS; | |
| wa_ctx_emit(batch, index, (MI_STORE_REGISTER_MEM_GEN8 | | |
| MI_SRM_LRM_GLOBAL_GTT)); | |
| wa_ctx_emit(batch, index, GEN8_L3SQCREG4); | |
| wa_ctx_emit(batch, index, ring->scratch.gtt_offset + 256); | |
| wa_ctx_emit(batch, index, 0); | |
| wa_ctx_emit(batch, index, MI_LOAD_REGISTER_IMM(1)); | |
| wa_ctx_emit(batch, index, GEN8_L3SQCREG4); | |
| wa_ctx_emit(batch, index, l3sqc4_flush); | |
| wa_ctx_emit(batch, index, GFX_OP_PIPE_CONTROL(6)); | |
| wa_ctx_emit(batch, index, (PIPE_CONTROL_CS_STALL | | |
| PIPE_CONTROL_DC_FLUSH_ENABLE)); | |
| wa_ctx_emit(batch, index, 0); | |
| wa_ctx_emit(batch, index, 0); | |
| wa_ctx_emit(batch, index, 0); | |
| wa_ctx_emit(batch, index, 0); | |
| wa_ctx_emit(batch, index, (MI_LOAD_REGISTER_MEM_GEN8 | | |
| MI_SRM_LRM_GLOBAL_GTT)); | |
| wa_ctx_emit(batch, index, GEN8_L3SQCREG4); | |
| wa_ctx_emit(batch, index, ring->scratch.gtt_offset + 256); | |
| wa_ctx_emit(batch, index, 0); | |
| return index; | |
| } | |
| static inline uint32_t wa_ctx_start(struct i915_wa_ctx_bb *wa_ctx, | |
| uint32_t offset, | |
| uint32_t start_alignment) | |
| { | |
| return wa_ctx->offset = ALIGN(offset, start_alignment); | |
| } | |
| static inline int wa_ctx_end(struct i915_wa_ctx_bb *wa_ctx, | |
| uint32_t offset, | |
| uint32_t size_alignment) | |
| { | |
| wa_ctx->size = offset - wa_ctx->offset; | |
| WARN(wa_ctx->size % size_alignment, | |
| "wa_ctx_bb failed sanity checks: size %d is not aligned to %d\n", | |
| wa_ctx->size, size_alignment); | |
| return 0; | |
| } | |
| /** | |
| * gen8_init_indirectctx_bb() - initialize indirect ctx batch with WA | |
| * | |
| * @ring: only applicable for RCS | |
| * @wa_ctx: structure representing wa_ctx | |
| * offset: specifies start of the batch, should be cache-aligned. This is updated | |
| * with the offset value received as input. | |
| * size: size of the batch in DWORDS but HW expects in terms of cachelines | |
| * @batch: page in which WA are loaded | |
| * @offset: This field specifies the start of the batch, it should be | |
| * cache-aligned otherwise it is adjusted accordingly. | |
| * Typically we only have one indirect_ctx and per_ctx batch buffer which are | |
| * initialized at the beginning and shared across all contexts but this field | |
| * helps us to have multiple batches at different offsets and select them based | |
| * on a criteria. At the moment this batch always start at the beginning of the page | |
| * and at this point we don't have multiple wa_ctx batch buffers. | |
| * | |
| * The number of WA applied are not known at the beginning; we use this field | |
| * to return the no of DWORDS written. | |
| * | |
| * It is to be noted that this batch does not contain MI_BATCH_BUFFER_END | |
| * so it adds NOOPs as padding to make it cacheline aligned. | |
| * MI_BATCH_BUFFER_END will be added to perctx batch and both of them together | |
| * makes a complete batch buffer. | |
| * | |
| * Return: non-zero if we exceed the PAGE_SIZE limit. | |
| */ | |
| static int gen8_init_indirectctx_bb(struct intel_engine_cs *ring, | |
| struct i915_wa_ctx_bb *wa_ctx, | |
| uint32_t *const batch, | |
| uint32_t *offset) | |
| { | |
| uint32_t scratch_addr; | |
| uint32_t index = wa_ctx_start(wa_ctx, *offset, CACHELINE_DWORDS); | |
| /* WaDisableCtxRestoreArbitration:bdw,chv */ | |
| wa_ctx_emit(batch, index, MI_ARB_ON_OFF | MI_ARB_DISABLE); | |
| /* WaFlushCoherentL3CacheLinesAtContextSwitch:bdw */ | |
| if (IS_BROADWELL(ring->dev)) { | |
| int rc = gen8_emit_flush_coherentl3_wa(ring, batch, index); | |
| if (rc < 0) | |
| return rc; | |
| index = rc; | |
| } | |
| /* WaClearSlmSpaceAtContextSwitch:bdw,chv */ | |
| /* Actual scratch location is at 128 bytes offset */ | |
| scratch_addr = ring->scratch.gtt_offset + 2*CACHELINE_BYTES; | |
| wa_ctx_emit(batch, index, GFX_OP_PIPE_CONTROL(6)); | |
| wa_ctx_emit(batch, index, (PIPE_CONTROL_FLUSH_L3 | | |
| PIPE_CONTROL_GLOBAL_GTT_IVB | | |
| PIPE_CONTROL_CS_STALL | | |
| PIPE_CONTROL_QW_WRITE)); | |
| wa_ctx_emit(batch, index, scratch_addr); | |
| wa_ctx_emit(batch, index, 0); | |
| wa_ctx_emit(batch, index, 0); | |
| wa_ctx_emit(batch, index, 0); | |
| /* Pad to end of cacheline */ | |
| while (index % CACHELINE_DWORDS) | |
| wa_ctx_emit(batch, index, MI_NOOP); | |
| /* | |
| * MI_BATCH_BUFFER_END is not required in Indirect ctx BB because | |
| * execution depends on the length specified in terms of cache lines | |
| * in the register CTX_RCS_INDIRECT_CTX | |
| */ | |
| return wa_ctx_end(wa_ctx, *offset = index, CACHELINE_DWORDS); | |
| } | |
| /** | |
| * gen8_init_perctx_bb() - initialize per ctx batch with WA | |
| * | |
| * @ring: only applicable for RCS | |
| * @wa_ctx: structure representing wa_ctx | |
| * offset: specifies start of the batch, should be cache-aligned. | |
| * size: size of the batch in DWORDS but HW expects in terms of cachelines | |
| * @batch: page in which WA are loaded | |
| * @offset: This field specifies the start of this batch. | |
| * This batch is started immediately after indirect_ctx batch. Since we ensure | |
| * that indirect_ctx ends on a cacheline this batch is aligned automatically. | |
| * | |
| * The number of DWORDS written are returned using this field. | |
| * | |
| * This batch is terminated with MI_BATCH_BUFFER_END and so we need not add padding | |
| * to align it with cacheline as padding after MI_BATCH_BUFFER_END is redundant. | |
| */ | |
| static int gen8_init_perctx_bb(struct intel_engine_cs *ring, | |
| struct i915_wa_ctx_bb *wa_ctx, | |
| uint32_t *const batch, | |
| uint32_t *offset) | |
| { | |
| uint32_t index = wa_ctx_start(wa_ctx, *offset, CACHELINE_DWORDS); | |
| /* WaDisableCtxRestoreArbitration:bdw,chv */ | |
| wa_ctx_emit(batch, index, MI_ARB_ON_OFF | MI_ARB_ENABLE); | |
| wa_ctx_emit(batch, index, MI_BATCH_BUFFER_END); | |
| return wa_ctx_end(wa_ctx, *offset = index, 1); | |
| } | |
| static int gen9_init_indirectctx_bb(struct intel_engine_cs *ring, | |
| struct i915_wa_ctx_bb *wa_ctx, | |
| uint32_t *const batch, | |
| uint32_t *offset) | |
| { | |
| int ret; | |
| struct drm_device *dev = ring->dev; | |
| uint32_t index = wa_ctx_start(wa_ctx, *offset, CACHELINE_DWORDS); | |
| /* WaDisableCtxRestoreArbitration:skl,bxt */ | |
| if ((IS_SKYLAKE(dev) && (INTEL_REVID(dev) <= SKL_REVID_D0)) || | |
| (IS_BROXTON(dev) && (INTEL_REVID(dev) == BXT_REVID_A0))) | |
| wa_ctx_emit(batch, index, MI_ARB_ON_OFF | MI_ARB_DISABLE); | |
| /* WaFlushCoherentL3CacheLinesAtContextSwitch:skl,bxt */ | |
| ret = gen8_emit_flush_coherentl3_wa(ring, batch, index); | |
| if (ret < 0) | |
| return ret; | |
| index = ret; | |
| /* Pad to end of cacheline */ | |
| while (index % CACHELINE_DWORDS) | |
| wa_ctx_emit(batch, index, MI_NOOP); | |
| return wa_ctx_end(wa_ctx, *offset = index, CACHELINE_DWORDS); | |
| } | |
| static int gen9_init_perctx_bb(struct intel_engine_cs *ring, | |
| struct i915_wa_ctx_bb *wa_ctx, | |
| uint32_t *const batch, | |
| uint32_t *offset) | |
| { | |
| struct drm_device *dev = ring->dev; | |
| uint32_t index = wa_ctx_start(wa_ctx, *offset, CACHELINE_DWORDS); | |
| /* WaSetDisablePixMaskCammingAndRhwoInCommonSliceChicken:skl,bxt */ | |
| if ((IS_SKYLAKE(dev) && (INTEL_REVID(dev) <= SKL_REVID_B0)) || | |
| (IS_BROXTON(dev) && (INTEL_REVID(dev) == BXT_REVID_A0))) { | |
| wa_ctx_emit(batch, index, MI_LOAD_REGISTER_IMM(1)); | |
| wa_ctx_emit(batch, index, GEN9_SLICE_COMMON_ECO_CHICKEN0); | |
| wa_ctx_emit(batch, index, | |
| _MASKED_BIT_ENABLE(DISABLE_PIXEL_MASK_CAMMING)); | |
| wa_ctx_emit(batch, index, MI_NOOP); | |
| } | |
| /* WaDisableCtxRestoreArbitration:skl,bxt */ | |
| if ((IS_SKYLAKE(dev) && (INTEL_REVID(dev) <= SKL_REVID_D0)) || | |
| (IS_BROXTON(dev) && (INTEL_REVID(dev) == BXT_REVID_A0))) | |
| wa_ctx_emit(batch, index, MI_ARB_ON_OFF | MI_ARB_ENABLE); | |
| wa_ctx_emit(batch, index, MI_BATCH_BUFFER_END); | |
| return wa_ctx_end(wa_ctx, *offset = index, 1); | |
| } | |
| static int lrc_setup_wa_ctx_obj(struct intel_engine_cs *ring, u32 size) | |
| { | |
| int ret; | |
| ring->wa_ctx.obj = i915_gem_alloc_object(ring->dev, PAGE_ALIGN(size)); | |
| if (!ring->wa_ctx.obj) { | |
| DRM_DEBUG_DRIVER("alloc LRC WA ctx backing obj failed.\n"); | |
| return -ENOMEM; | |
| } | |
| ret = i915_gem_obj_ggtt_pin(ring->wa_ctx.obj, PAGE_SIZE, 0); | |
| if (ret) { | |
| DRM_DEBUG_DRIVER("pin LRC WA ctx backing obj failed: %d\n", | |
| ret); | |
| drm_gem_object_unreference(&ring->wa_ctx.obj->base); | |
| return ret; | |
| } | |
| return 0; | |
| } | |
| static void lrc_destroy_wa_ctx_obj(struct intel_engine_cs *ring) | |
| { | |
| if (ring->wa_ctx.obj) { | |
| i915_gem_object_ggtt_unpin(ring->wa_ctx.obj); | |
| drm_gem_object_unreference(&ring->wa_ctx.obj->base); | |
| ring->wa_ctx.obj = NULL; | |
| } | |
| } | |
| static int intel_init_workaround_bb(struct intel_engine_cs *ring) | |
| { | |
| int ret; | |
| uint32_t *batch; | |
| uint32_t offset; | |
| struct page *page; | |
| struct i915_ctx_workarounds *wa_ctx = &ring->wa_ctx; | |
| WARN_ON(ring->id != RCS); | |
| /* update this when WA for higher Gen are added */ | |
| if (INTEL_INFO(ring->dev)->gen > 9) { | |
| DRM_ERROR("WA batch buffer is not initialized for Gen%d\n", | |
| INTEL_INFO(ring->dev)->gen); | |
| return 0; | |
| } | |
| /* some WA perform writes to scratch page, ensure it is valid */ | |
| if (ring->scratch.obj == NULL) { | |
| DRM_ERROR("scratch page not allocated for %s\n", ring->name); | |
| return -EINVAL; | |
| } | |
| ret = lrc_setup_wa_ctx_obj(ring, PAGE_SIZE); | |
| if (ret) { | |
| DRM_DEBUG_DRIVER("Failed to setup context WA page: %d\n", ret); | |
| return ret; | |
| } | |
| page = i915_gem_object_get_page(wa_ctx->obj, 0); | |
| batch = kmap_atomic(page); | |
| offset = 0; | |
| if (INTEL_INFO(ring->dev)->gen == 8) { | |
| ret = gen8_init_indirectctx_bb(ring, | |
| &wa_ctx->indirect_ctx, | |
| batch, | |
| &offset); | |
| if (ret) | |
| goto out; | |
| ret = gen8_init_perctx_bb(ring, | |
| &wa_ctx->per_ctx, | |
| batch, | |
| &offset); | |
| if (ret) | |
| goto out; | |
| } else if (INTEL_INFO(ring->dev)->gen == 9) { | |
| ret = gen9_init_indirectctx_bb(ring, | |
| &wa_ctx->indirect_ctx, | |
| batch, | |
| &offset); | |
| if (ret) | |
| goto out; | |
| ret = gen9_init_perctx_bb(ring, | |
| &wa_ctx->per_ctx, | |
| batch, | |
| &offset); | |
| if (ret) | |
| goto out; | |
| } | |
| out: | |
| kunmap_atomic(batch); | |
| if (ret) | |
| lrc_destroy_wa_ctx_obj(ring); | |
| return ret; | |
| } | |
| static int gen8_init_common_ring(struct intel_engine_cs *ring) | |
| { | |
| struct drm_device *dev = ring->dev; | |
| struct drm_i915_private *dev_priv = dev->dev_private; | |
| u8 next_context_status_buffer_hw; | |
| lrc_setup_hardware_status_page(ring, | |
| ring->default_context->engine[ring->id].state); | |
| I915_WRITE_IMR(ring, ~(ring->irq_enable_mask | ring->irq_keep_mask)); | |
| I915_WRITE(RING_HWSTAM(ring->mmio_base), 0xffffffff); | |
| if (ring->status_page.obj) { | |
| I915_WRITE(RING_HWS_PGA(ring->mmio_base), | |
| (u32)ring->status_page.gfx_addr); | |
| POSTING_READ(RING_HWS_PGA(ring->mmio_base)); | |
| } | |
| I915_WRITE(RING_MODE_GEN7(ring), | |
| _MASKED_BIT_DISABLE(GFX_REPLAY_MODE) | | |
| _MASKED_BIT_ENABLE(GFX_RUN_LIST_ENABLE)); | |
| POSTING_READ(RING_MODE_GEN7(ring)); | |
| /* | |
| * Instead of resetting the Context Status Buffer (CSB) read pointer to | |
| * zero, we need to read the write pointer from hardware and use its | |
| * value because "this register is power context save restored". | |
| * Effectively, these states have been observed: | |
| * | |
| * | Suspend-to-idle (freeze) | Suspend-to-RAM (mem) | | |
| * BDW | CSB regs not reset | CSB regs reset | | |
| * CHT | CSB regs not reset | CSB regs not reset | | |
| */ | |
| next_context_status_buffer_hw = (I915_READ(RING_CONTEXT_STATUS_PTR(ring)) | |
| & GEN8_CSB_PTR_MASK); | |
| /* | |
| * When the CSB registers are reset (also after power-up / gpu reset), | |
| * CSB write pointer is set to all 1's, which is not valid, use '5' in | |
| * this special case, so the first element read is CSB[0]. | |
| */ | |
| if (next_context_status_buffer_hw == GEN8_CSB_PTR_MASK) | |
| next_context_status_buffer_hw = (GEN8_CSB_ENTRIES - 1); | |
| ring->next_context_status_buffer = next_context_status_buffer_hw; | |
| DRM_DEBUG_DRIVER("Execlists enabled for %s\n", ring->name); | |
| memset(&ring->hangcheck, 0, sizeof(ring->hangcheck)); | |
| return 0; | |
| } | |
| static int gen8_init_render_ring(struct intel_engine_cs *ring) | |
| { | |
| struct drm_device *dev = ring->dev; | |
| struct drm_i915_private *dev_priv = dev->dev_private; | |
| int ret; | |
| ret = gen8_init_common_ring(ring); | |
| if (ret) | |
| return ret; | |
| /* We need to disable the AsyncFlip performance optimisations in order | |
| * to use MI_WAIT_FOR_EVENT within the CS. It should already be | |
| * programmed to '1' on all products. | |
| * | |
| * WaDisableAsyncFlipPerfMode:snb,ivb,hsw,vlv,bdw,chv | |
| */ | |
| I915_WRITE(MI_MODE, _MASKED_BIT_ENABLE(ASYNC_FLIP_PERF_DISABLE)); | |
| I915_WRITE(INSTPM, _MASKED_BIT_ENABLE(INSTPM_FORCE_ORDERING)); | |
| return init_workarounds_ring(ring); | |
| } | |
| static int gen9_init_render_ring(struct intel_engine_cs *ring) | |
| { | |
| int ret; | |
| ret = gen8_init_common_ring(ring); | |
| if (ret) | |
| return ret; | |
| return init_workarounds_ring(ring); | |
| } | |
| static int intel_logical_ring_emit_pdps(struct drm_i915_gem_request *req) | |
| { | |
| struct i915_hw_ppgtt *ppgtt = req->ctx->ppgtt; | |
| struct intel_engine_cs *ring = req->ring; | |
| struct intel_ringbuffer *ringbuf = req->ringbuf; | |
| const int num_lri_cmds = GEN8_LEGACY_PDPES * 2; | |
| int i, ret; | |
| ret = intel_logical_ring_begin(req, num_lri_cmds * 2 + 2); | |
| if (ret) | |
| return ret; | |
| intel_logical_ring_emit(ringbuf, MI_LOAD_REGISTER_IMM(num_lri_cmds)); | |
| for (i = GEN8_LEGACY_PDPES - 1; i >= 0; i--) { | |
| const dma_addr_t pd_daddr = i915_page_dir_dma_addr(ppgtt, i); | |
| intel_logical_ring_emit(ringbuf, GEN8_RING_PDP_UDW(ring, i)); | |
| intel_logical_ring_emit(ringbuf, upper_32_bits(pd_daddr)); | |
| intel_logical_ring_emit(ringbuf, GEN8_RING_PDP_LDW(ring, i)); | |
| intel_logical_ring_emit(ringbuf, lower_32_bits(pd_daddr)); | |
| } | |
| intel_logical_ring_emit(ringbuf, MI_NOOP); | |
| intel_logical_ring_advance(ringbuf); | |
| return 0; | |
| } | |
| static int gen8_emit_bb_start(struct drm_i915_gem_request *req, | |
| u64 offset, unsigned dispatch_flags) | |
| { | |
| struct intel_ringbuffer *ringbuf = req->ringbuf; | |
| bool ppgtt = !(dispatch_flags & I915_DISPATCH_SECURE); | |
| int ret; | |
| /* Don't rely in hw updating PDPs, specially in lite-restore. | |
| * Ideally, we should set Force PD Restore in ctx descriptor, | |
| * but we can't. Force Restore would be a second option, but | |
| * it is unsafe in case of lite-restore (because the ctx is | |
| * not idle). PML4 is allocated during ppgtt init so this is | |
| * not needed in 48-bit.*/ | |
| if (req->ctx->ppgtt && | |
| (intel_ring_flag(req->ring) & req->ctx->ppgtt->pd_dirty_rings)) { | |
| if (!USES_FULL_48BIT_PPGTT(req->i915) && | |
| !intel_vgpu_active(req->i915->dev)) { | |
| ret = intel_logical_ring_emit_pdps(req); | |
| if (ret) | |
| return ret; | |
| } | |
| req->ctx->ppgtt->pd_dirty_rings &= ~intel_ring_flag(req->ring); | |
| } | |
| ret = intel_logical_ring_begin(req, 4); | |
| if (ret) | |
| return ret; | |
| /* FIXME(BDW): Address space and security selectors. */ | |
| intel_logical_ring_emit(ringbuf, MI_BATCH_BUFFER_START_GEN8 | | |
| (ppgtt<<8) | | |
| (dispatch_flags & I915_DISPATCH_RS ? | |
| MI_BATCH_RESOURCE_STREAMER : 0)); | |
| intel_logical_ring_emit(ringbuf, lower_32_bits(offset)); | |
| intel_logical_ring_emit(ringbuf, upper_32_bits(offset)); | |
| intel_logical_ring_emit(ringbuf, MI_NOOP); | |
| intel_logical_ring_advance(ringbuf); | |
| return 0; | |
| } | |
| static bool gen8_logical_ring_get_irq(struct intel_engine_cs *ring) | |
| { | |
| struct drm_device *dev = ring->dev; | |
| struct drm_i915_private *dev_priv = dev->dev_private; | |
| unsigned long flags; | |
| if (WARN_ON(!intel_irqs_enabled(dev_priv))) | |
| return false; | |
| spin_lock_irqsave(&dev_priv->irq_lock, flags); | |
| if (ring->irq_refcount++ == 0) { | |
| I915_WRITE_IMR(ring, ~(ring->irq_enable_mask | ring->irq_keep_mask)); | |
| POSTING_READ(RING_IMR(ring->mmio_base)); | |
| } | |
| spin_unlock_irqrestore(&dev_priv->irq_lock, flags); | |
| return true; | |
| } | |
| static void gen8_logical_ring_put_irq(struct intel_engine_cs *ring) | |
| { | |
| struct drm_device *dev = ring->dev; | |
| struct drm_i915_private *dev_priv = dev->dev_private; | |
| unsigned long flags; | |
| spin_lock_irqsave(&dev_priv->irq_lock, flags); | |
| if (--ring->irq_refcount == 0) { | |
| I915_WRITE_IMR(ring, ~ring->irq_keep_mask); | |
| POSTING_READ(RING_IMR(ring->mmio_base)); | |
| } | |
| spin_unlock_irqrestore(&dev_priv->irq_lock, flags); | |
| } | |
| static int gen8_emit_flush(struct drm_i915_gem_request *request, | |
| u32 invalidate_domains, | |
| u32 unused) | |
| { | |
| struct intel_ringbuffer *ringbuf = request->ringbuf; | |
| struct intel_engine_cs *ring = ringbuf->ring; | |
| struct drm_device *dev = ring->dev; | |
| struct drm_i915_private *dev_priv = dev->dev_private; | |
| uint32_t cmd; | |
| int ret; | |
| ret = intel_logical_ring_begin(request, 4); | |
| if (ret) | |
| return ret; | |
| cmd = MI_FLUSH_DW + 1; | |
| /* We always require a command barrier so that subsequent | |
| * commands, such as breadcrumb interrupts, are strictly ordered | |
| * wrt the contents of the write cache being flushed to memory | |
| * (and thus being coherent from the CPU). | |
| */ | |
| cmd |= MI_FLUSH_DW_STORE_INDEX | MI_FLUSH_DW_OP_STOREDW; | |
| if (invalidate_domains & I915_GEM_GPU_DOMAINS) { | |
| cmd |= MI_INVALIDATE_TLB; | |
| if (ring == &dev_priv->ring[VCS]) | |
| cmd |= MI_INVALIDATE_BSD; | |
| } | |
| intel_logical_ring_emit(ringbuf, cmd); | |
| intel_logical_ring_emit(ringbuf, | |
| I915_GEM_HWS_SCRATCH_ADDR | | |
| MI_FLUSH_DW_USE_GTT); | |
| intel_logical_ring_emit(ringbuf, 0); /* upper addr */ | |
| intel_logical_ring_emit(ringbuf, 0); /* value */ | |
| intel_logical_ring_advance(ringbuf); | |
| return 0; | |
| } | |
| static int gen8_emit_flush_render(struct drm_i915_gem_request *request, | |
| u32 invalidate_domains, | |
| u32 flush_domains) | |
| { | |
| struct intel_ringbuffer *ringbuf = request->ringbuf; | |
| struct intel_engine_cs *ring = ringbuf->ring; | |
| u32 scratch_addr = ring->scratch.gtt_offset + 2 * CACHELINE_BYTES; | |
| bool vf_flush_wa; | |
| u32 flags = 0; | |
| int ret; | |
| flags |= PIPE_CONTROL_CS_STALL; | |
| if (flush_domains) { | |
| flags |= PIPE_CONTROL_RENDER_TARGET_CACHE_FLUSH; | |
| flags |= PIPE_CONTROL_DEPTH_CACHE_FLUSH; | |
| flags |= PIPE_CONTROL_FLUSH_ENABLE; | |
| } | |
| if (invalidate_domains) { | |
| flags |= PIPE_CONTROL_TLB_INVALIDATE; | |
| flags |= PIPE_CONTROL_INSTRUCTION_CACHE_INVALIDATE; | |
| flags |= PIPE_CONTROL_TEXTURE_CACHE_INVALIDATE; | |
| flags |= PIPE_CONTROL_VF_CACHE_INVALIDATE; | |
| flags |= PIPE_CONTROL_CONST_CACHE_INVALIDATE; | |
| flags |= PIPE_CONTROL_STATE_CACHE_INVALIDATE; | |
| flags |= PIPE_CONTROL_QW_WRITE; | |
| flags |= PIPE_CONTROL_GLOBAL_GTT_IVB; | |
| } | |
| /* | |
| * On GEN9+ Before VF_CACHE_INVALIDATE we need to emit a NULL pipe | |
| * control. | |
| */ | |
| vf_flush_wa = INTEL_INFO(ring->dev)->gen >= 9 && | |
| flags & PIPE_CONTROL_VF_CACHE_INVALIDATE; | |
| ret = intel_logical_ring_begin(request, vf_flush_wa ? 12 : 6); | |
| if (ret) | |
| return ret; | |
| if (vf_flush_wa) { | |
| intel_logical_ring_emit(ringbuf, GFX_OP_PIPE_CONTROL(6)); | |
| intel_logical_ring_emit(ringbuf, 0); | |
| intel_logical_ring_emit(ringbuf, 0); | |
| intel_logical_ring_emit(ringbuf, 0); | |
| intel_logical_ring_emit(ringbuf, 0); | |
| intel_logical_ring_emit(ringbuf, 0); | |
| } | |
| intel_logical_ring_emit(ringbuf, GFX_OP_PIPE_CONTROL(6)); | |
| intel_logical_ring_emit(ringbuf, flags); | |
| intel_logical_ring_emit(ringbuf, scratch_addr); | |
| intel_logical_ring_emit(ringbuf, 0); | |
| intel_logical_ring_emit(ringbuf, 0); | |
| intel_logical_ring_emit(ringbuf, 0); | |
| intel_logical_ring_advance(ringbuf); | |
| return 0; | |
| } | |
| static u32 gen8_get_seqno(struct intel_engine_cs *ring, bool lazy_coherency) | |
| { | |
| return intel_read_status_page(ring, I915_GEM_HWS_INDEX); | |
| } | |
| static void gen8_set_seqno(struct intel_engine_cs *ring, u32 seqno) | |
| { | |
| intel_write_status_page(ring, I915_GEM_HWS_INDEX, seqno); | |
| } | |
| static u32 bxt_a_get_seqno(struct intel_engine_cs *ring, bool lazy_coherency) | |
| { | |
| /* | |
| * On BXT A steppings there is a HW coherency issue whereby the | |
| * MI_STORE_DATA_IMM storing the completed request's seqno | |
| * occasionally doesn't invalidate the CPU cache. Work around this by | |
| * clflushing the corresponding cacheline whenever the caller wants | |
| * the coherency to be guaranteed. Note that this cacheline is known | |
| * to be clean at this point, since we only write it in | |
| * bxt_a_set_seqno(), where we also do a clflush after the write. So | |
| * this clflush in practice becomes an invalidate operation. | |
| */ | |
| if (!lazy_coherency) | |
| intel_flush_status_page(ring, I915_GEM_HWS_INDEX); | |
| return intel_read_status_page(ring, I915_GEM_HWS_INDEX); | |
| } | |
| static void bxt_a_set_seqno(struct intel_engine_cs *ring, u32 seqno) | |
| { | |
| intel_write_status_page(ring, I915_GEM_HWS_INDEX, seqno); | |
| /* See bxt_a_get_seqno() explaining the reason for the clflush. */ | |
| intel_flush_status_page(ring, I915_GEM_HWS_INDEX); | |
| } | |
| static int gen8_emit_request(struct drm_i915_gem_request *request) | |
| { | |
| struct intel_ringbuffer *ringbuf = request->ringbuf; | |
| struct intel_engine_cs *ring = ringbuf->ring; | |
| u32 cmd; | |
| int ret; | |
| /* | |
| * Reserve space for 2 NOOPs at the end of each request to be | |
| * used as a workaround for not being allowed to do lite | |
| * restore with HEAD==TAIL (WaIdleLiteRestore). | |
| */ | |
| ret = intel_logical_ring_begin(request, 8); | |
| if (ret) | |
| return ret; | |
| cmd = MI_STORE_DWORD_IMM_GEN4; | |
| cmd |= MI_GLOBAL_GTT; | |
| intel_logical_ring_emit(ringbuf, cmd); | |
| intel_logical_ring_emit(ringbuf, | |
| (ring->status_page.gfx_addr + | |
| (I915_GEM_HWS_INDEX << MI_STORE_DWORD_INDEX_SHIFT))); | |
| intel_logical_ring_emit(ringbuf, 0); | |
| intel_logical_ring_emit(ringbuf, i915_gem_request_get_seqno(request)); | |
| intel_logical_ring_emit(ringbuf, MI_USER_INTERRUPT); | |
| intel_logical_ring_emit(ringbuf, MI_NOOP); | |
| intel_logical_ring_advance_and_submit(request); | |
| /* | |
| * Here we add two extra NOOPs as padding to avoid | |
| * lite restore of a context with HEAD==TAIL. | |
| */ | |
| intel_logical_ring_emit(ringbuf, MI_NOOP); | |
| intel_logical_ring_emit(ringbuf, MI_NOOP); | |
| intel_logical_ring_advance(ringbuf); | |
| return 0; | |
| } | |
| static int intel_lr_context_render_state_init(struct drm_i915_gem_request *req) | |
| { | |
| struct render_state so; | |
| int ret; | |
| ret = i915_gem_render_state_prepare(req->ring, &so); | |
| if (ret) | |
| return ret; | |
| if (so.rodata == NULL) | |
| return 0; | |
| ret = req->ring->emit_bb_start(req, so.ggtt_offset, | |
| I915_DISPATCH_SECURE); | |
| if (ret) | |
| goto out; | |
| ret = req->ring->emit_bb_start(req, | |
| (so.ggtt_offset + so.aux_batch_offset), | |
| I915_DISPATCH_SECURE); | |
| if (ret) | |
| goto out; | |
| i915_vma_move_to_active(i915_gem_obj_to_ggtt(so.obj), req); | |
| out: | |
| i915_gem_render_state_fini(&so); | |
| return ret; | |
| } | |
| static int gen8_init_rcs_context(struct drm_i915_gem_request *req) | |
| { | |
| int ret; | |
| ret = intel_logical_ring_workarounds_emit(req); | |
| if (ret) | |
| return ret; | |
| ret = intel_rcs_context_init_mocs(req); | |
| /* | |
| * Failing to program the MOCS is non-fatal.The system will not | |
| * run at peak performance. So generate an error and carry on. | |
| */ | |
| if (ret) | |
| DRM_ERROR("MOCS failed to program: expect performance issues.\n"); | |
| return intel_lr_context_render_state_init(req); | |
| } | |
| /** | |
| * intel_logical_ring_cleanup() - deallocate the Engine Command Streamer | |
| * | |
| * @ring: Engine Command Streamer. | |
| * | |
| */ | |
| void intel_logical_ring_cleanup(struct intel_engine_cs *ring) | |
| { | |
| struct drm_i915_private *dev_priv; | |
| if (!intel_ring_initialized(ring)) | |
| return; | |
| dev_priv = ring->dev->dev_private; | |
| intel_logical_ring_stop(ring); | |
| WARN_ON((I915_READ_MODE(ring) & MODE_IDLE) == 0); | |
| if (ring->cleanup) | |
| ring->cleanup(ring); | |
| i915_cmd_parser_fini_ring(ring); | |
| i915_gem_batch_pool_fini(&ring->batch_pool); | |
| if (ring->status_page.obj) { | |
| kunmap(sg_page(ring->status_page.obj->pages->sgl)); | |
| ring->status_page.obj = NULL; | |
| } | |
| lrc_destroy_wa_ctx_obj(ring); | |
| } | |
| static int logical_ring_init(struct drm_device *dev, struct intel_engine_cs *ring) | |
| { | |
| int ret; | |
| /* Intentionally left blank. */ | |
| ring->buffer = NULL; | |
| ring->dev = dev; | |
| INIT_LIST_HEAD(&ring->active_list); | |
| INIT_LIST_HEAD(&ring->request_list); | |
| i915_gem_batch_pool_init(dev, &ring->batch_pool); | |
| init_waitqueue_head(&ring->irq_queue); | |
| INIT_LIST_HEAD(&ring->execlist_queue); | |
| INIT_LIST_HEAD(&ring->execlist_retired_req_list); | |
| spin_lock_init(&ring->execlist_lock); | |
| ret = i915_cmd_parser_init_ring(ring); | |
| if (ret) | |
| return ret; | |
| ret = intel_lr_context_deferred_alloc(ring->default_context, ring); | |
| if (ret) | |
| return ret; | |
| /* As this is the default context, always pin it */ | |
| ret = intel_lr_context_do_pin( | |
| ring, | |
| ring->default_context->engine[ring->id].state, | |
| ring->default_context->engine[ring->id].ringbuf); | |
| if (ret) { | |
| DRM_ERROR( | |
| "Failed to pin and map ringbuffer %s: %d\n", | |
| ring->name, ret); | |
| return ret; | |
| } | |
| return ret; | |
| } | |
| static int logical_render_ring_init(struct drm_device *dev) | |
| { | |
| struct drm_i915_private *dev_priv = dev->dev_private; | |
| struct intel_engine_cs *ring = &dev_priv->ring[RCS]; | |
| int ret; | |
| ring->name = "render ring"; | |
| ring->id = RCS; | |
| ring->mmio_base = RENDER_RING_BASE; | |
| ring->irq_enable_mask = | |
| GT_RENDER_USER_INTERRUPT << GEN8_RCS_IRQ_SHIFT; | |
| ring->irq_keep_mask = | |
| GT_CONTEXT_SWITCH_INTERRUPT << GEN8_RCS_IRQ_SHIFT; | |
| if (HAS_L3_DPF(dev)) | |
| ring->irq_keep_mask |= GT_RENDER_L3_PARITY_ERROR_INTERRUPT; | |
| if (INTEL_INFO(dev)->gen >= 9) | |
| ring->init_hw = gen9_init_render_ring; | |
| else | |
| ring->init_hw = gen8_init_render_ring; | |
| ring->init_context = gen8_init_rcs_context; | |
| ring->cleanup = intel_fini_pipe_control; | |
| if (IS_BROXTON(dev) && INTEL_REVID(dev) < BXT_REVID_B0) { | |
| ring->get_seqno = bxt_a_get_seqno; | |
| ring->set_seqno = bxt_a_set_seqno; | |
| } else { | |
| ring->get_seqno = gen8_get_seqno; | |
| ring->set_seqno = gen8_set_seqno; | |
| } | |
| ring->emit_request = gen8_emit_request; | |
| ring->emit_flush = gen8_emit_flush_render; | |
| ring->irq_get = gen8_logical_ring_get_irq; | |
| ring->irq_put = gen8_logical_ring_put_irq; | |
| ring->emit_bb_start = gen8_emit_bb_start; | |
| ring->dev = dev; | |
| ret = intel_init_pipe_control(ring); | |
| if (ret) | |
| return ret; | |
| ret = intel_init_workaround_bb(ring); | |
| if (ret) { | |
| /* | |
| * We continue even if we fail to initialize WA batch | |
| * because we only expect rare glitches but nothing | |
| * critical to prevent us from using GPU | |
| */ | |
| DRM_ERROR("WA batch buffer initialization failed: %d\n", | |
| ret); | |
| } | |
| ret = logical_ring_init(dev, ring); | |
| if (ret) { | |
| lrc_destroy_wa_ctx_obj(ring); | |
| } | |
| return ret; | |
| } | |
| static int logical_bsd_ring_init(struct drm_device *dev) | |
| { | |
| struct drm_i915_private *dev_priv = dev->dev_private; | |
| struct intel_engine_cs *ring = &dev_priv->ring[VCS]; | |
| ring->name = "bsd ring"; | |
| ring->id = VCS; | |
| ring->mmio_base = GEN6_BSD_RING_BASE; | |
| ring->irq_enable_mask = | |
| GT_RENDER_USER_INTERRUPT << GEN8_VCS1_IRQ_SHIFT; | |
| ring->irq_keep_mask = | |
| GT_CONTEXT_SWITCH_INTERRUPT << GEN8_VCS1_IRQ_SHIFT; | |
| ring->init_hw = gen8_init_common_ring; | |
| if (IS_BROXTON(dev) && INTEL_REVID(dev) < BXT_REVID_B0) { | |
| ring->get_seqno = bxt_a_get_seqno; | |
| ring->set_seqno = bxt_a_set_seqno; | |
| } else { | |
| ring->get_seqno = gen8_get_seqno; | |
| ring->set_seqno = gen8_set_seqno; | |
| } | |
| ring->emit_request = gen8_emit_request; | |
| ring->emit_flush = gen8_emit_flush; | |
| ring->irq_get = gen8_logical_ring_get_irq; | |
| ring->irq_put = gen8_logical_ring_put_irq; | |
| ring->emit_bb_start = gen8_emit_bb_start; | |
| return logical_ring_init(dev, ring); | |
| } | |
| static int logical_bsd2_ring_init(struct drm_device *dev) | |
| { | |
| struct drm_i915_private *dev_priv = dev->dev_private; | |
| struct intel_engine_cs *ring = &dev_priv->ring[VCS2]; | |
| ring->name = "bds2 ring"; | |
| ring->id = VCS2; | |
| ring->mmio_base = GEN8_BSD2_RING_BASE; | |
| ring->irq_enable_mask = | |
| GT_RENDER_USER_INTERRUPT << GEN8_VCS2_IRQ_SHIFT; | |
| ring->irq_keep_mask = | |
| GT_CONTEXT_SWITCH_INTERRUPT << GEN8_VCS2_IRQ_SHIFT; | |
| ring->init_hw = gen8_init_common_ring; | |
| ring->get_seqno = gen8_get_seqno; | |
| ring->set_seqno = gen8_set_seqno; | |
| ring->emit_request = gen8_emit_request; | |
| ring->emit_flush = gen8_emit_flush; | |
| ring->irq_get = gen8_logical_ring_get_irq; | |
| ring->irq_put = gen8_logical_ring_put_irq; | |
| ring->emit_bb_start = gen8_emit_bb_start; | |
| return logical_ring_init(dev, ring); | |
| } | |
| static int logical_blt_ring_init(struct drm_device *dev) | |
| { | |
| struct drm_i915_private *dev_priv = dev->dev_private; | |
| struct intel_engine_cs *ring = &dev_priv->ring[BCS]; | |
| ring->name = "blitter ring"; | |
| ring->id = BCS; | |
| ring->mmio_base = BLT_RING_BASE; | |
| ring->irq_enable_mask = | |
| GT_RENDER_USER_INTERRUPT << GEN8_BCS_IRQ_SHIFT; | |
| ring->irq_keep_mask = | |
| GT_CONTEXT_SWITCH_INTERRUPT << GEN8_BCS_IRQ_SHIFT; | |
| ring->init_hw = gen8_init_common_ring; | |
| if (IS_BROXTON(dev) && INTEL_REVID(dev) < BXT_REVID_B0) { | |
| ring->get_seqno = bxt_a_get_seqno; | |
| ring->set_seqno = bxt_a_set_seqno; | |
| } else { | |
| ring->get_seqno = gen8_get_seqno; | |
| ring->set_seqno = gen8_set_seqno; | |
| } | |
| ring->emit_request = gen8_emit_request; | |
| ring->emit_flush = gen8_emit_flush; | |
| ring->irq_get = gen8_logical_ring_get_irq; | |
| ring->irq_put = gen8_logical_ring_put_irq; | |
| ring->emit_bb_start = gen8_emit_bb_start; | |
| return logical_ring_init(dev, ring); | |
| } | |
| static int logical_vebox_ring_init(struct drm_device *dev) | |
| { | |
| struct drm_i915_private *dev_priv = dev->dev_private; | |
| struct intel_engine_cs *ring = &dev_priv->ring[VECS]; | |
| ring->name = "video enhancement ring"; | |
| ring->id = VECS; | |
| ring->mmio_base = VEBOX_RING_BASE; | |
| ring->irq_enable_mask = | |
| GT_RENDER_USER_INTERRUPT << GEN8_VECS_IRQ_SHIFT; | |
| ring->irq_keep_mask = | |
| GT_CONTEXT_SWITCH_INTERRUPT << GEN8_VECS_IRQ_SHIFT; | |
| ring->init_hw = gen8_init_common_ring; | |
| if (IS_BROXTON(dev) && INTEL_REVID(dev) < BXT_REVID_B0) { | |
| ring->get_seqno = bxt_a_get_seqno; | |
| ring->set_seqno = bxt_a_set_seqno; | |
| } else { | |
| ring->get_seqno = gen8_get_seqno; | |
| ring->set_seqno = gen8_set_seqno; | |
| } | |
| ring->emit_request = gen8_emit_request; | |
| ring->emit_flush = gen8_emit_flush; | |
| ring->irq_get = gen8_logical_ring_get_irq; | |
| ring->irq_put = gen8_logical_ring_put_irq; | |
| ring->emit_bb_start = gen8_emit_bb_start; | |
| return logical_ring_init(dev, ring); | |
| } | |
| /** | |
| * intel_logical_rings_init() - allocate, populate and init the Engine Command Streamers | |
| * @dev: DRM device. | |
| * | |
| * This function inits the engines for an Execlists submission style (the equivalent in the | |
| * legacy ringbuffer submission world would be i915_gem_init_rings). It does it only for | |
| * those engines that are present in the hardware. | |
| * | |
| * Return: non-zero if the initialization failed. | |
| */ | |
| int intel_logical_rings_init(struct drm_device *dev) | |
| { | |
| struct drm_i915_private *dev_priv = dev->dev_private; | |
| int ret; | |
| ret = logical_render_ring_init(dev); | |
| if (ret) | |
| return ret; | |
| if (HAS_BSD(dev)) { | |
| ret = logical_bsd_ring_init(dev); | |
| if (ret) | |
| goto cleanup_render_ring; | |
| } | |
| if (HAS_BLT(dev)) { | |
| ret = logical_blt_ring_init(dev); | |
| if (ret) | |
| goto cleanup_bsd_ring; | |
| } | |
| if (HAS_VEBOX(dev)) { | |
| ret = logical_vebox_ring_init(dev); | |
| if (ret) | |
| goto cleanup_blt_ring; | |
| } | |
| if (HAS_BSD2(dev)) { | |
| ret = logical_bsd2_ring_init(dev); | |
| if (ret) | |
| goto cleanup_vebox_ring; | |
| } | |
| return 0; | |
| cleanup_vebox_ring: | |
| intel_logical_ring_cleanup(&dev_priv->ring[VECS]); | |
| cleanup_blt_ring: | |
| intel_logical_ring_cleanup(&dev_priv->ring[BCS]); | |
| cleanup_bsd_ring: | |
| intel_logical_ring_cleanup(&dev_priv->ring[VCS]); | |
| cleanup_render_ring: | |
| intel_logical_ring_cleanup(&dev_priv->ring[RCS]); | |
| return ret; | |
| } | |
| static u32 | |
| make_rpcs(struct drm_device *dev) | |
| { | |
| u32 rpcs = 0; | |
| /* | |
| * No explicit RPCS request is needed to ensure full | |
| * slice/subslice/EU enablement prior to Gen9. | |
| */ | |
| if (INTEL_INFO(dev)->gen < 9) | |
| return 0; | |
| /* | |
| * Starting in Gen9, render power gating can leave | |
| * slice/subslice/EU in a partially enabled state. We | |
| * must make an explicit request through RPCS for full | |
| * enablement. | |
| */ | |
| if (INTEL_INFO(dev)->has_slice_pg) { | |
| rpcs |= GEN8_RPCS_S_CNT_ENABLE; | |
| rpcs |= INTEL_INFO(dev)->slice_total << | |
| GEN8_RPCS_S_CNT_SHIFT; | |
| rpcs |= GEN8_RPCS_ENABLE; | |
| } | |
| if (INTEL_INFO(dev)->has_subslice_pg) { | |
| rpcs |= GEN8_RPCS_SS_CNT_ENABLE; | |
| rpcs |= INTEL_INFO(dev)->subslice_per_slice << | |
| GEN8_RPCS_SS_CNT_SHIFT; | |
| rpcs |= GEN8_RPCS_ENABLE; | |
| } | |
| if (INTEL_INFO(dev)->has_eu_pg) { | |
| rpcs |= INTEL_INFO(dev)->eu_per_subslice << | |
| GEN8_RPCS_EU_MIN_SHIFT; | |
| rpcs |= INTEL_INFO(dev)->eu_per_subslice << | |
| GEN8_RPCS_EU_MAX_SHIFT; | |
| rpcs |= GEN8_RPCS_ENABLE; | |
| } | |
| return rpcs; | |
| } | |
| static int | |
| populate_lr_context(struct intel_context *ctx, struct drm_i915_gem_object *ctx_obj, | |
| struct intel_engine_cs *ring, struct intel_ringbuffer *ringbuf) | |
| { | |
| struct drm_device *dev = ring->dev; | |
| struct drm_i915_private *dev_priv = dev->dev_private; | |
| struct i915_hw_ppgtt *ppgtt = ctx->ppgtt; | |
| struct page *page; | |
| uint32_t *reg_state; | |
| int ret; | |
| if (!ppgtt) | |
| ppgtt = dev_priv->mm.aliasing_ppgtt; | |
| ret = i915_gem_object_set_to_cpu_domain(ctx_obj, true); | |
| if (ret) { | |
| DRM_DEBUG_DRIVER("Could not set to CPU domain\n"); | |
| return ret; | |
| } | |
| ret = i915_gem_object_get_pages(ctx_obj); | |
| if (ret) { | |
| DRM_DEBUG_DRIVER("Could not get object pages\n"); | |
| return ret; | |
| } | |
| i915_gem_object_pin_pages(ctx_obj); | |
| /* The second page of the context object contains some fields which must | |
| * be set up prior to the first execution. */ | |
| page = i915_gem_object_get_page(ctx_obj, LRC_STATE_PN); | |
| reg_state = kmap_atomic(page); | |
| /* A context is actually a big batch buffer with several MI_LOAD_REGISTER_IMM | |
| * commands followed by (reg, value) pairs. The values we are setting here are | |
| * only for the first context restore: on a subsequent save, the GPU will | |
| * recreate this batchbuffer with new values (including all the missing | |
| * MI_LOAD_REGISTER_IMM commands that we are not initializing here). */ | |
| if (ring->id == RCS) | |
| reg_state[CTX_LRI_HEADER_0] = MI_LOAD_REGISTER_IMM(14); | |
| else | |
| reg_state[CTX_LRI_HEADER_0] = MI_LOAD_REGISTER_IMM(11); | |
| reg_state[CTX_LRI_HEADER_0] |= MI_LRI_FORCE_POSTED; | |
| reg_state[CTX_CONTEXT_CONTROL] = RING_CONTEXT_CONTROL(ring); | |
| reg_state[CTX_CONTEXT_CONTROL+1] = | |
| _MASKED_BIT_ENABLE(CTX_CTRL_INHIBIT_SYN_CTX_SWITCH | | |
| CTX_CTRL_ENGINE_CTX_RESTORE_INHIBIT | | |
| CTX_CTRL_RS_CTX_ENABLE); | |
| reg_state[CTX_RING_HEAD] = RING_HEAD(ring->mmio_base); | |
| reg_state[CTX_RING_HEAD+1] = 0; | |
| reg_state[CTX_RING_TAIL] = RING_TAIL(ring->mmio_base); | |
| reg_state[CTX_RING_TAIL+1] = 0; | |
| reg_state[CTX_RING_BUFFER_START] = RING_START(ring->mmio_base); | |
| /* Ring buffer start address is not known until the buffer is pinned. | |
| * It is written to the context image in execlists_update_context() | |
| */ | |
| reg_state[CTX_RING_BUFFER_CONTROL] = RING_CTL(ring->mmio_base); | |
| reg_state[CTX_RING_BUFFER_CONTROL+1] = | |
| ((ringbuf->size - PAGE_SIZE) & RING_NR_PAGES) | RING_VALID; | |
| reg_state[CTX_BB_HEAD_U] = ring->mmio_base + 0x168; | |
| reg_state[CTX_BB_HEAD_U+1] = 0; | |
| reg_state[CTX_BB_HEAD_L] = ring->mmio_base + 0x140; | |
| reg_state[CTX_BB_HEAD_L+1] = 0; | |
| reg_state[CTX_BB_STATE] = ring->mmio_base + 0x110; | |
| reg_state[CTX_BB_STATE+1] = (1<<5); | |
| reg_state[CTX_SECOND_BB_HEAD_U] = ring->mmio_base + 0x11c; | |
| reg_state[CTX_SECOND_BB_HEAD_U+1] = 0; | |
| reg_state[CTX_SECOND_BB_HEAD_L] = ring->mmio_base + 0x114; | |
| reg_state[CTX_SECOND_BB_HEAD_L+1] = 0; | |
| reg_state[CTX_SECOND_BB_STATE] = ring->mmio_base + 0x118; | |
| reg_state[CTX_SECOND_BB_STATE+1] = 0; | |
| if (ring->id == RCS) { | |
| reg_state[CTX_BB_PER_CTX_PTR] = ring->mmio_base + 0x1c0; | |
| reg_state[CTX_BB_PER_CTX_PTR+1] = 0; | |
| reg_state[CTX_RCS_INDIRECT_CTX] = ring->mmio_base + 0x1c4; | |
| reg_state[CTX_RCS_INDIRECT_CTX+1] = 0; | |
| reg_state[CTX_RCS_INDIRECT_CTX_OFFSET] = ring->mmio_base + 0x1c8; | |
| reg_state[CTX_RCS_INDIRECT_CTX_OFFSET+1] = 0; | |
| if (ring->wa_ctx.obj) { | |
| struct i915_ctx_workarounds *wa_ctx = &ring->wa_ctx; | |
| uint32_t ggtt_offset = i915_gem_obj_ggtt_offset(wa_ctx->obj); | |
| reg_state[CTX_RCS_INDIRECT_CTX+1] = | |
| (ggtt_offset + wa_ctx->indirect_ctx.offset * sizeof(uint32_t)) | | |
| (wa_ctx->indirect_ctx.size / CACHELINE_DWORDS); | |
| reg_state[CTX_RCS_INDIRECT_CTX_OFFSET+1] = | |
| CTX_RCS_INDIRECT_CTX_OFFSET_DEFAULT << 6; | |
| reg_state[CTX_BB_PER_CTX_PTR+1] = | |
| (ggtt_offset + wa_ctx->per_ctx.offset * sizeof(uint32_t)) | | |
| 0x01; | |
| } | |
| } | |
| reg_state[CTX_LRI_HEADER_1] = MI_LOAD_REGISTER_IMM(9); | |
| reg_state[CTX_LRI_HEADER_1] |= MI_LRI_FORCE_POSTED; | |
| reg_state[CTX_CTX_TIMESTAMP] = ring->mmio_base + 0x3a8; | |
| reg_state[CTX_CTX_TIMESTAMP+1] = 0; | |
| reg_state[CTX_PDP3_UDW] = GEN8_RING_PDP_UDW(ring, 3); | |
| reg_state[CTX_PDP3_LDW] = GEN8_RING_PDP_LDW(ring, 3); | |
| reg_state[CTX_PDP2_UDW] = GEN8_RING_PDP_UDW(ring, 2); | |
| reg_state[CTX_PDP2_LDW] = GEN8_RING_PDP_LDW(ring, 2); | |
| reg_state[CTX_PDP1_UDW] = GEN8_RING_PDP_UDW(ring, 1); | |
| reg_state[CTX_PDP1_LDW] = GEN8_RING_PDP_LDW(ring, 1); | |
| reg_state[CTX_PDP0_UDW] = GEN8_RING_PDP_UDW(ring, 0); | |
| reg_state[CTX_PDP0_LDW] = GEN8_RING_PDP_LDW(ring, 0); | |
| if (USES_FULL_48BIT_PPGTT(ppgtt->base.dev)) { | |
| /* 64b PPGTT (48bit canonical) | |
| * PDP0_DESCRIPTOR contains the base address to PML4 and | |
| * other PDP Descriptors are ignored. | |
| */ | |
| ASSIGN_CTX_PML4(ppgtt, reg_state); | |
| } else { | |
| /* 32b PPGTT | |
| * PDP*_DESCRIPTOR contains the base address of space supported. | |
| * With dynamic page allocation, PDPs may not be allocated at | |
| * this point. Point the unallocated PDPs to the scratch page | |
| */ | |
| ASSIGN_CTX_PDP(ppgtt, reg_state, 3); | |
| ASSIGN_CTX_PDP(ppgtt, reg_state, 2); | |
| ASSIGN_CTX_PDP(ppgtt, reg_state, 1); | |
| ASSIGN_CTX_PDP(ppgtt, reg_state, 0); | |
| } | |
| if (ring->id == RCS) { | |
| reg_state[CTX_LRI_HEADER_2] = MI_LOAD_REGISTER_IMM(1); | |
| reg_state[CTX_R_PWR_CLK_STATE] = GEN8_R_PWR_CLK_STATE; | |
| reg_state[CTX_R_PWR_CLK_STATE+1] = make_rpcs(dev); | |
| } | |
| kunmap_atomic(reg_state); | |
| ctx_obj->dirty = 1; | |
| set_page_dirty(page); | |
| i915_gem_object_unpin_pages(ctx_obj); | |
| return 0; | |
| } | |
| /** | |
| * intel_lr_context_free() - free the LRC specific bits of a context | |
| * @ctx: the LR context to free. | |
| * | |
| * The real context freeing is done in i915_gem_context_free: this only | |
| * takes care of the bits that are LRC related: the per-engine backing | |
| * objects and the logical ringbuffer. | |
| */ | |
| void intel_lr_context_free(struct intel_context *ctx) | |
| { | |
| int i; | |
| for (i = 0; i < I915_NUM_RINGS; i++) { | |
| struct drm_i915_gem_object *ctx_obj = ctx->engine[i].state; | |
| if (ctx_obj) { | |
| struct intel_ringbuffer *ringbuf = | |
| ctx->engine[i].ringbuf; | |
| struct intel_engine_cs *ring = ringbuf->ring; | |
| if (ctx == ring->default_context) { | |
| intel_unpin_ringbuffer_obj(ringbuf); | |
| i915_gem_object_ggtt_unpin(ctx_obj); | |
| } | |
| WARN_ON(ctx->engine[ring->id].pin_count); | |
| intel_ringbuffer_free(ringbuf); | |
| drm_gem_object_unreference(&ctx_obj->base); | |
| } | |
| } | |
| } | |
| static uint32_t get_lr_context_size(struct intel_engine_cs *ring) | |
| { | |
| int ret = 0; | |
| WARN_ON(INTEL_INFO(ring->dev)->gen < 8); | |
| switch (ring->id) { | |
| case RCS: | |
| if (INTEL_INFO(ring->dev)->gen >= 9) | |
| ret = GEN9_LR_CONTEXT_RENDER_SIZE; | |
| else | |
| ret = GEN8_LR_CONTEXT_RENDER_SIZE; | |
| break; | |
| case VCS: | |
| case BCS: | |
| case VECS: | |
| case VCS2: | |
| ret = GEN8_LR_CONTEXT_OTHER_SIZE; | |
| break; | |
| } | |
| return ret; | |
| } | |
| static void lrc_setup_hardware_status_page(struct intel_engine_cs *ring, | |
| struct drm_i915_gem_object *default_ctx_obj) | |
| { | |
| struct drm_i915_private *dev_priv = ring->dev->dev_private; | |
| struct page *page; | |
| /* The HWSP is part of the default context object in LRC mode. */ | |
| ring->status_page.gfx_addr = i915_gem_obj_ggtt_offset(default_ctx_obj) | |
| + LRC_PPHWSP_PN * PAGE_SIZE; | |
| page = i915_gem_object_get_page(default_ctx_obj, LRC_PPHWSP_PN); | |
| ring->status_page.page_addr = kmap(page); | |
| ring->status_page.obj = default_ctx_obj; | |
| I915_WRITE(RING_HWS_PGA(ring->mmio_base), | |
| (u32)ring->status_page.gfx_addr); | |
| POSTING_READ(RING_HWS_PGA(ring->mmio_base)); | |
| } | |
| /** | |
| * intel_lr_context_deferred_alloc() - create the LRC specific bits of a context | |
| * @ctx: LR context to create. | |
| * @ring: engine to be used with the context. | |
| * | |
| * This function can be called more than once, with different engines, if we plan | |
| * to use the context with them. The context backing objects and the ringbuffers | |
| * (specially the ringbuffer backing objects) suck a lot of memory up, and that's why | |
| * the creation is a deferred call: it's better to make sure first that we need to use | |
| * a given ring with the context. | |
| * | |
| * Return: non-zero on error. | |
| */ | |
| int intel_lr_context_deferred_alloc(struct intel_context *ctx, | |
| struct intel_engine_cs *ring) | |
| { | |
| struct drm_device *dev = ring->dev; | |
| struct drm_i915_gem_object *ctx_obj; | |
| uint32_t context_size; | |
| struct intel_ringbuffer *ringbuf; | |
| int ret; | |
| WARN_ON(ctx->legacy_hw_ctx.rcs_state != NULL); | |
| WARN_ON(ctx->engine[ring->id].state); | |
| context_size = round_up(get_lr_context_size(ring), 4096); | |
| /* One extra page as the sharing data between driver and GuC */ | |
| context_size += PAGE_SIZE * LRC_PPHWSP_PN; | |
| ctx_obj = i915_gem_alloc_object(dev, context_size); | |
| if (!ctx_obj) { | |
| DRM_DEBUG_DRIVER("Alloc LRC backing obj failed.\n"); | |
| return -ENOMEM; | |
| } | |
| ringbuf = intel_engine_create_ringbuffer(ring, 4 * PAGE_SIZE); | |
| if (IS_ERR(ringbuf)) { | |
| ret = PTR_ERR(ringbuf); | |
| goto error_deref_obj; | |
| } | |
| ret = populate_lr_context(ctx, ctx_obj, ring, ringbuf); | |
| if (ret) { | |
| DRM_DEBUG_DRIVER("Failed to populate LRC: %d\n", ret); | |
| goto error_ringbuf; | |
| } | |
| ctx->engine[ring->id].ringbuf = ringbuf; | |
| ctx->engine[ring->id].state = ctx_obj; | |
| if (ctx != ring->default_context && ring->init_context) { | |
| struct drm_i915_gem_request *req; | |
| ret = i915_gem_request_alloc(ring, | |
| ctx, &req); | |
| if (ret) { | |
| DRM_ERROR("ring create req: %d\n", | |
| ret); | |
| goto error_ringbuf; | |
| } | |
| ret = ring->init_context(req); | |
| if (ret) { | |
| DRM_ERROR("ring init context: %d\n", | |
| ret); | |
| i915_gem_request_cancel(req); | |
| goto error_ringbuf; | |
| } | |
| i915_add_request_no_flush(req); | |
| } | |
| return 0; | |
| error_ringbuf: | |
| intel_ringbuffer_free(ringbuf); | |
| error_deref_obj: | |
| drm_gem_object_unreference(&ctx_obj->base); | |
| ctx->engine[ring->id].ringbuf = NULL; | |
| ctx->engine[ring->id].state = NULL; | |
| return ret; | |
| } | |
| void intel_lr_context_reset(struct drm_device *dev, | |
| struct intel_context *ctx) | |
| { | |
| struct drm_i915_private *dev_priv = dev->dev_private; | |
| struct intel_engine_cs *ring; | |
| int i; | |
| for_each_ring(ring, dev_priv, i) { | |
| struct drm_i915_gem_object *ctx_obj = | |
| ctx->engine[ring->id].state; | |
| struct intel_ringbuffer *ringbuf = | |
| ctx->engine[ring->id].ringbuf; | |
| uint32_t *reg_state; | |
| struct page *page; | |
| if (!ctx_obj) | |
| continue; | |
| if (i915_gem_object_get_pages(ctx_obj)) { | |
| WARN(1, "Failed get_pages for context obj\n"); | |
| continue; | |
| } | |
| page = i915_gem_object_get_page(ctx_obj, LRC_STATE_PN); | |
| reg_state = kmap_atomic(page); | |
| reg_state[CTX_RING_HEAD+1] = 0; | |
| reg_state[CTX_RING_TAIL+1] = 0; | |
| kunmap_atomic(reg_state); | |
| ringbuf->head = 0; | |
| ringbuf->tail = 0; | |
| } | |
| } |