| /* | |
| * Copyright (C) STMicroelectronics SA 2014 | |
| * Author: Vincent Abriou <vincent.abriou@st.com> for STMicroelectronics. | |
| * License terms: GNU General Public License (GPL), version 2 | |
| */ | |
| #ifndef _STI_HDMI_H_ | |
| #define _STI_HDMI_H_ | |
| #include <linux/platform_device.h> | |
| #include <drm/drmP.h> | |
| #define HDMI_STA 0x0010 | |
| #define HDMI_STA_DLL_LCK BIT(5) | |
| #define HDMI_STA_HOT_PLUG_SHIFT 4 | |
| #define HDMI_STA_HOT_PLUG (1 << HDMI_STA_HOT_PLUG_SHIFT) | |
| struct sti_hdmi; | |
| struct hdmi_phy_ops { | |
| bool (*start)(struct sti_hdmi *hdmi); | |
| void (*stop)(struct sti_hdmi *hdmi); | |
| }; | |
| /** | |
| * STI hdmi structure | |
| * | |
| * @dev: driver device | |
| * @drm_dev: pointer to drm device | |
| * @mode: current display mode selected | |
| * @regs: hdmi register | |
| * @syscfg: syscfg register for pll rejection configuration | |
| * @clk_pix: hdmi pixel clock | |
| * @clk_tmds: hdmi tmds clock | |
| * @clk_phy: hdmi phy clock | |
| * @clk_audio: hdmi audio clock | |
| * @irq: hdmi interrupt number | |
| * @irq_status: interrupt status register | |
| * @phy_ops: phy start/stop operations | |
| * @enabled: true if hdmi is enabled else false | |
| * @hpd: hot plug detect status | |
| * @wait_event: wait event | |
| * @event_received: wait event status | |
| * @reset: reset control of the hdmi phy | |
| */ | |
| struct sti_hdmi { | |
| struct device dev; | |
| struct drm_device *drm_dev; | |
| struct drm_display_mode mode; | |
| void __iomem *regs; | |
| void __iomem *syscfg; | |
| struct clk *clk_pix; | |
| struct clk *clk_tmds; | |
| struct clk *clk_phy; | |
| struct clk *clk_audio; | |
| int irq; | |
| u32 irq_status; | |
| struct hdmi_phy_ops *phy_ops; | |
| bool enabled; | |
| bool hpd; | |
| wait_queue_head_t wait_event; | |
| bool event_received; | |
| struct reset_control *reset; | |
| struct i2c_adapter *ddc_adapt; | |
| }; | |
| u32 hdmi_read(struct sti_hdmi *hdmi, int offset); | |
| void hdmi_write(struct sti_hdmi *hdmi, u32 val, int offset); | |
| /** | |
| * hdmi phy config structure | |
| * | |
| * A pointer to an array of these structures is passed to a TMDS (HDMI) output | |
| * via the control interface to provide board and SoC specific | |
| * configurations of the HDMI PHY. Each entry in the array specifies a hardware | |
| * specific configuration for a given TMDS clock frequency range. | |
| * | |
| * @min_tmds_freq: Lower bound of TMDS clock frequency this entry applies to | |
| * @max_tmds_freq: Upper bound of TMDS clock frequency this entry applies to | |
| * @config: SoC specific register configuration | |
| */ | |
| struct hdmi_phy_config { | |
| u32 min_tmds_freq; | |
| u32 max_tmds_freq; | |
| u32 config[4]; | |
| }; | |
| #endif |