| /* | |
| * Copyright (C) 2015 Broadcom | |
| * | |
| * This program is free software; you can redistribute it and/or modify | |
| * it under the terms of the GNU General Public License version 2 as | |
| * published by the Free Software Foundation. | |
| */ | |
| /** | |
| * DOC: VC4 CRTC module | |
| * | |
| * In VC4, the Pixel Valve is what most closely corresponds to the | |
| * DRM's concept of a CRTC. The PV generates video timings from the | |
| * output's clock plus its configuration. It pulls scaled pixels from | |
| * the HVS at that timing, and feeds it to the encoder. | |
| * | |
| * However, the DRM CRTC also collects the configuration of all the | |
| * DRM planes attached to it. As a result, this file also manages | |
| * setup of the VC4 HVS's display elements on the CRTC. | |
| * | |
| * The 2835 has 3 different pixel valves. pv0 in the audio power | |
| * domain feeds DSI0 or DPI, while pv1 feeds DS1 or SMI. pv2 in the | |
| * image domain can feed either HDMI or the SDTV controller. The | |
| * pixel valve chooses from the CPRMAN clocks (HSM for HDMI, VEC for | |
| * SDTV, etc.) according to which output type is chosen in the mux. | |
| * | |
| * For power management, the pixel valve's registers are all clocked | |
| * by the AXI clock, while the timings and FIFOs make use of the | |
| * output-specific clock. Since the encoders also directly consume | |
| * the CPRMAN clocks, and know what timings they need, they are the | |
| * ones that set the clock. | |
| */ | |
| #include "drm_atomic.h" | |
| #include "drm_atomic_helper.h" | |
| #include "drm_crtc_helper.h" | |
| #include "linux/clk.h" | |
| #include "linux/component.h" | |
| #include "linux/of_device.h" | |
| #include "vc4_drv.h" | |
| #include "vc4_regs.h" | |
| struct vc4_crtc { | |
| struct drm_crtc base; | |
| const struct vc4_crtc_data *data; | |
| void __iomem *regs; | |
| /* Which HVS channel we're using for our CRTC. */ | |
| int channel; | |
| /* Pointer to the actual hardware display list memory for the | |
| * crtc. | |
| */ | |
| u32 __iomem *dlist; | |
| u32 dlist_size; /* in dwords */ | |
| struct drm_pending_vblank_event *event; | |
| }; | |
| static inline struct vc4_crtc * | |
| to_vc4_crtc(struct drm_crtc *crtc) | |
| { | |
| return (struct vc4_crtc *)crtc; | |
| } | |
| struct vc4_crtc_data { | |
| /* Which channel of the HVS this pixelvalve sources from. */ | |
| int hvs_channel; | |
| enum vc4_encoder_type encoder0_type; | |
| enum vc4_encoder_type encoder1_type; | |
| }; | |
| #define CRTC_WRITE(offset, val) writel(val, vc4_crtc->regs + (offset)) | |
| #define CRTC_READ(offset) readl(vc4_crtc->regs + (offset)) | |
| #define CRTC_REG(reg) { reg, #reg } | |
| static const struct { | |
| u32 reg; | |
| const char *name; | |
| } crtc_regs[] = { | |
| CRTC_REG(PV_CONTROL), | |
| CRTC_REG(PV_V_CONTROL), | |
| CRTC_REG(PV_VSYNCD), | |
| CRTC_REG(PV_HORZA), | |
| CRTC_REG(PV_HORZB), | |
| CRTC_REG(PV_VERTA), | |
| CRTC_REG(PV_VERTB), | |
| CRTC_REG(PV_VERTA_EVEN), | |
| CRTC_REG(PV_VERTB_EVEN), | |
| CRTC_REG(PV_INTEN), | |
| CRTC_REG(PV_INTSTAT), | |
| CRTC_REG(PV_STAT), | |
| CRTC_REG(PV_HACT_ACT), | |
| }; | |
| static void vc4_crtc_dump_regs(struct vc4_crtc *vc4_crtc) | |
| { | |
| int i; | |
| for (i = 0; i < ARRAY_SIZE(crtc_regs); i++) { | |
| DRM_INFO("0x%04x (%s): 0x%08x\n", | |
| crtc_regs[i].reg, crtc_regs[i].name, | |
| CRTC_READ(crtc_regs[i].reg)); | |
| } | |
| } | |
| #ifdef CONFIG_DEBUG_FS | |
| int vc4_crtc_debugfs_regs(struct seq_file *m, void *unused) | |
| { | |
| struct drm_info_node *node = (struct drm_info_node *)m->private; | |
| struct drm_device *dev = node->minor->dev; | |
| int crtc_index = (uintptr_t)node->info_ent->data; | |
| struct drm_crtc *crtc; | |
| struct vc4_crtc *vc4_crtc; | |
| int i; | |
| i = 0; | |
| list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) { | |
| if (i == crtc_index) | |
| break; | |
| i++; | |
| } | |
| if (!crtc) | |
| return 0; | |
| vc4_crtc = to_vc4_crtc(crtc); | |
| for (i = 0; i < ARRAY_SIZE(crtc_regs); i++) { | |
| seq_printf(m, "%s (0x%04x): 0x%08x\n", | |
| crtc_regs[i].name, crtc_regs[i].reg, | |
| CRTC_READ(crtc_regs[i].reg)); | |
| } | |
| return 0; | |
| } | |
| #endif | |
| static void vc4_crtc_destroy(struct drm_crtc *crtc) | |
| { | |
| drm_crtc_cleanup(crtc); | |
| } | |
| static u32 vc4_get_fifo_full_level(u32 format) | |
| { | |
| static const u32 fifo_len_bytes = 64; | |
| static const u32 hvs_latency_pix = 6; | |
| switch (format) { | |
| case PV_CONTROL_FORMAT_DSIV_16: | |
| case PV_CONTROL_FORMAT_DSIC_16: | |
| return fifo_len_bytes - 2 * hvs_latency_pix; | |
| case PV_CONTROL_FORMAT_DSIV_18: | |
| return fifo_len_bytes - 14; | |
| case PV_CONTROL_FORMAT_24: | |
| case PV_CONTROL_FORMAT_DSIV_24: | |
| default: | |
| return fifo_len_bytes - 3 * hvs_latency_pix; | |
| } | |
| } | |
| /* | |
| * Returns the clock select bit for the connector attached to the | |
| * CRTC. | |
| */ | |
| static int vc4_get_clock_select(struct drm_crtc *crtc) | |
| { | |
| struct drm_connector *connector; | |
| drm_for_each_connector(connector, crtc->dev) { | |
| if (connector->state->crtc == crtc) { | |
| struct drm_encoder *encoder = connector->encoder; | |
| struct vc4_encoder *vc4_encoder = | |
| to_vc4_encoder(encoder); | |
| return vc4_encoder->clock_select; | |
| } | |
| } | |
| return -1; | |
| } | |
| static void vc4_crtc_mode_set_nofb(struct drm_crtc *crtc) | |
| { | |
| struct vc4_crtc *vc4_crtc = to_vc4_crtc(crtc); | |
| struct drm_crtc_state *state = crtc->state; | |
| struct drm_display_mode *mode = &state->adjusted_mode; | |
| bool interlace = mode->flags & DRM_MODE_FLAG_INTERLACE; | |
| u32 vactive = (mode->vdisplay >> (interlace ? 1 : 0)); | |
| u32 format = PV_CONTROL_FORMAT_24; | |
| bool debug_dump_regs = false; | |
| int clock_select = vc4_get_clock_select(crtc); | |
| if (debug_dump_regs) { | |
| DRM_INFO("CRTC %d regs before:\n", drm_crtc_index(crtc)); | |
| vc4_crtc_dump_regs(vc4_crtc); | |
| } | |
| /* Reset the PV fifo. */ | |
| CRTC_WRITE(PV_CONTROL, 0); | |
| CRTC_WRITE(PV_CONTROL, PV_CONTROL_FIFO_CLR | PV_CONTROL_EN); | |
| CRTC_WRITE(PV_CONTROL, 0); | |
| CRTC_WRITE(PV_HORZA, | |
| VC4_SET_FIELD(mode->htotal - mode->hsync_end, | |
| PV_HORZA_HBP) | | |
| VC4_SET_FIELD(mode->hsync_end - mode->hsync_start, | |
| PV_HORZA_HSYNC)); | |
| CRTC_WRITE(PV_HORZB, | |
| VC4_SET_FIELD(mode->hsync_start - mode->hdisplay, | |
| PV_HORZB_HFP) | | |
| VC4_SET_FIELD(mode->hdisplay, PV_HORZB_HACTIVE)); | |
| if (interlace) { | |
| CRTC_WRITE(PV_VERTA_EVEN, | |
| VC4_SET_FIELD(mode->vtotal - mode->vsync_end - 1, | |
| PV_VERTA_VBP) | | |
| VC4_SET_FIELD(mode->vsync_end - mode->vsync_start, | |
| PV_VERTA_VSYNC)); | |
| CRTC_WRITE(PV_VERTB_EVEN, | |
| VC4_SET_FIELD(mode->vsync_start - mode->vdisplay, | |
| PV_VERTB_VFP) | | |
| VC4_SET_FIELD(vactive, PV_VERTB_VACTIVE)); | |
| } | |
| CRTC_WRITE(PV_HACT_ACT, mode->hdisplay); | |
| CRTC_WRITE(PV_V_CONTROL, | |
| PV_VCONTROL_CONTINUOUS | | |
| (interlace ? PV_VCONTROL_INTERLACE : 0)); | |
| CRTC_WRITE(PV_CONTROL, | |
| VC4_SET_FIELD(format, PV_CONTROL_FORMAT) | | |
| VC4_SET_FIELD(vc4_get_fifo_full_level(format), | |
| PV_CONTROL_FIFO_LEVEL) | | |
| PV_CONTROL_CLR_AT_START | | |
| PV_CONTROL_TRIGGER_UNDERFLOW | | |
| PV_CONTROL_WAIT_HSTART | | |
| VC4_SET_FIELD(clock_select, PV_CONTROL_CLK_SELECT) | | |
| PV_CONTROL_FIFO_CLR | | |
| PV_CONTROL_EN); | |
| if (debug_dump_regs) { | |
| DRM_INFO("CRTC %d regs after:\n", drm_crtc_index(crtc)); | |
| vc4_crtc_dump_regs(vc4_crtc); | |
| } | |
| } | |
| static void require_hvs_enabled(struct drm_device *dev) | |
| { | |
| struct vc4_dev *vc4 = to_vc4_dev(dev); | |
| WARN_ON_ONCE((HVS_READ(SCALER_DISPCTRL) & SCALER_DISPCTRL_ENABLE) != | |
| SCALER_DISPCTRL_ENABLE); | |
| } | |
| static void vc4_crtc_disable(struct drm_crtc *crtc) | |
| { | |
| struct drm_device *dev = crtc->dev; | |
| struct vc4_dev *vc4 = to_vc4_dev(dev); | |
| struct vc4_crtc *vc4_crtc = to_vc4_crtc(crtc); | |
| u32 chan = vc4_crtc->channel; | |
| int ret; | |
| require_hvs_enabled(dev); | |
| CRTC_WRITE(PV_V_CONTROL, | |
| CRTC_READ(PV_V_CONTROL) & ~PV_VCONTROL_VIDEN); | |
| ret = wait_for(!(CRTC_READ(PV_V_CONTROL) & PV_VCONTROL_VIDEN), 1); | |
| WARN_ONCE(ret, "Timeout waiting for !PV_VCONTROL_VIDEN\n"); | |
| if (HVS_READ(SCALER_DISPCTRLX(chan)) & | |
| SCALER_DISPCTRLX_ENABLE) { | |
| HVS_WRITE(SCALER_DISPCTRLX(chan), | |
| SCALER_DISPCTRLX_RESET); | |
| /* While the docs say that reset is self-clearing, it | |
| * seems it doesn't actually. | |
| */ | |
| HVS_WRITE(SCALER_DISPCTRLX(chan), 0); | |
| } | |
| /* Once we leave, the scaler should be disabled and its fifo empty. */ | |
| WARN_ON_ONCE(HVS_READ(SCALER_DISPCTRLX(chan)) & SCALER_DISPCTRLX_RESET); | |
| WARN_ON_ONCE(VC4_GET_FIELD(HVS_READ(SCALER_DISPSTATX(chan)), | |
| SCALER_DISPSTATX_MODE) != | |
| SCALER_DISPSTATX_MODE_DISABLED); | |
| WARN_ON_ONCE((HVS_READ(SCALER_DISPSTATX(chan)) & | |
| (SCALER_DISPSTATX_FULL | SCALER_DISPSTATX_EMPTY)) != | |
| SCALER_DISPSTATX_EMPTY); | |
| } | |
| static void vc4_crtc_enable(struct drm_crtc *crtc) | |
| { | |
| struct drm_device *dev = crtc->dev; | |
| struct vc4_dev *vc4 = to_vc4_dev(dev); | |
| struct vc4_crtc *vc4_crtc = to_vc4_crtc(crtc); | |
| struct drm_crtc_state *state = crtc->state; | |
| struct drm_display_mode *mode = &state->adjusted_mode; | |
| require_hvs_enabled(dev); | |
| /* Turn on the scaler, which will wait for vstart to start | |
| * compositing. | |
| */ | |
| HVS_WRITE(SCALER_DISPCTRLX(vc4_crtc->channel), | |
| VC4_SET_FIELD(mode->hdisplay, SCALER_DISPCTRLX_WIDTH) | | |
| VC4_SET_FIELD(mode->vdisplay, SCALER_DISPCTRLX_HEIGHT) | | |
| SCALER_DISPCTRLX_ENABLE); | |
| /* Turn on the pixel valve, which will emit the vstart signal. */ | |
| CRTC_WRITE(PV_V_CONTROL, | |
| CRTC_READ(PV_V_CONTROL) | PV_VCONTROL_VIDEN); | |
| } | |
| static int vc4_crtc_atomic_check(struct drm_crtc *crtc, | |
| struct drm_crtc_state *state) | |
| { | |
| struct drm_device *dev = crtc->dev; | |
| struct vc4_dev *vc4 = to_vc4_dev(dev); | |
| struct drm_plane *plane; | |
| struct vc4_crtc *vc4_crtc = to_vc4_crtc(crtc); | |
| u32 dlist_count = 0; | |
| /* The pixelvalve can only feed one encoder (and encoders are | |
| * 1:1 with connectors.) | |
| */ | |
| if (drm_atomic_connectors_for_crtc(state->state, crtc) > 1) | |
| return -EINVAL; | |
| drm_atomic_crtc_state_for_each_plane(plane, state) { | |
| struct drm_plane_state *plane_state = | |
| state->state->plane_states[drm_plane_index(plane)]; | |
| /* plane might not have changed, in which case take | |
| * current state: | |
| */ | |
| if (!plane_state) | |
| plane_state = plane->state; | |
| dlist_count += vc4_plane_dlist_size(plane_state); | |
| } | |
| dlist_count++; /* Account for SCALER_CTL0_END. */ | |
| if (!vc4_crtc->dlist || dlist_count > vc4_crtc->dlist_size) { | |
| vc4_crtc->dlist = ((u32 __iomem *)vc4->hvs->dlist + | |
| HVS_BOOTLOADER_DLIST_END); | |
| vc4_crtc->dlist_size = ((SCALER_DLIST_SIZE >> 2) - | |
| HVS_BOOTLOADER_DLIST_END); | |
| if (dlist_count > vc4_crtc->dlist_size) { | |
| DRM_DEBUG_KMS("dlist too large for CRTC (%d > %d).\n", | |
| dlist_count, vc4_crtc->dlist_size); | |
| return -EINVAL; | |
| } | |
| } | |
| return 0; | |
| } | |
| static void vc4_crtc_atomic_flush(struct drm_crtc *crtc, | |
| struct drm_crtc_state *old_state) | |
| { | |
| struct drm_device *dev = crtc->dev; | |
| struct vc4_dev *vc4 = to_vc4_dev(dev); | |
| struct vc4_crtc *vc4_crtc = to_vc4_crtc(crtc); | |
| struct drm_plane *plane; | |
| bool debug_dump_regs = false; | |
| u32 __iomem *dlist_next = vc4_crtc->dlist; | |
| if (debug_dump_regs) { | |
| DRM_INFO("CRTC %d HVS before:\n", drm_crtc_index(crtc)); | |
| vc4_hvs_dump_state(dev); | |
| } | |
| /* Copy all the active planes' dlist contents to the hardware dlist. | |
| * | |
| * XXX: If the new display list was large enough that it | |
| * overlapped a currently-read display list, we need to do | |
| * something like disable scanout before putting in the new | |
| * list. For now, we're safe because we only have the two | |
| * planes. | |
| */ | |
| drm_atomic_crtc_for_each_plane(plane, crtc) { | |
| dlist_next += vc4_plane_write_dlist(plane, dlist_next); | |
| } | |
| if (dlist_next == vc4_crtc->dlist) { | |
| /* If no planes were enabled, use the SCALER_CTL0_END | |
| * at the start of the display list memory (in the | |
| * bootloader section). We'll rewrite that | |
| * SCALER_CTL0_END, just in case, though. | |
| */ | |
| writel(SCALER_CTL0_END, vc4->hvs->dlist); | |
| HVS_WRITE(SCALER_DISPLISTX(vc4_crtc->channel), 0); | |
| } else { | |
| writel(SCALER_CTL0_END, dlist_next); | |
| dlist_next++; | |
| HVS_WRITE(SCALER_DISPLISTX(vc4_crtc->channel), | |
| (u32 __iomem *)vc4_crtc->dlist - | |
| (u32 __iomem *)vc4->hvs->dlist); | |
| /* Make the next display list start after ours. */ | |
| vc4_crtc->dlist_size -= (dlist_next - vc4_crtc->dlist); | |
| vc4_crtc->dlist = dlist_next; | |
| } | |
| if (debug_dump_regs) { | |
| DRM_INFO("CRTC %d HVS after:\n", drm_crtc_index(crtc)); | |
| vc4_hvs_dump_state(dev); | |
| } | |
| if (crtc->state->event) { | |
| unsigned long flags; | |
| crtc->state->event->pipe = drm_crtc_index(crtc); | |
| WARN_ON(drm_crtc_vblank_get(crtc) != 0); | |
| spin_lock_irqsave(&dev->event_lock, flags); | |
| vc4_crtc->event = crtc->state->event; | |
| spin_unlock_irqrestore(&dev->event_lock, flags); | |
| crtc->state->event = NULL; | |
| } | |
| } | |
| int vc4_enable_vblank(struct drm_device *dev, unsigned int crtc_id) | |
| { | |
| struct vc4_dev *vc4 = to_vc4_dev(dev); | |
| struct vc4_crtc *vc4_crtc = vc4->crtc[crtc_id]; | |
| CRTC_WRITE(PV_INTEN, PV_INT_VFP_START); | |
| return 0; | |
| } | |
| void vc4_disable_vblank(struct drm_device *dev, unsigned int crtc_id) | |
| { | |
| struct vc4_dev *vc4 = to_vc4_dev(dev); | |
| struct vc4_crtc *vc4_crtc = vc4->crtc[crtc_id]; | |
| CRTC_WRITE(PV_INTEN, 0); | |
| } | |
| static void vc4_crtc_handle_page_flip(struct vc4_crtc *vc4_crtc) | |
| { | |
| struct drm_crtc *crtc = &vc4_crtc->base; | |
| struct drm_device *dev = crtc->dev; | |
| unsigned long flags; | |
| spin_lock_irqsave(&dev->event_lock, flags); | |
| if (vc4_crtc->event) { | |
| drm_crtc_send_vblank_event(crtc, vc4_crtc->event); | |
| vc4_crtc->event = NULL; | |
| } | |
| spin_unlock_irqrestore(&dev->event_lock, flags); | |
| } | |
| static irqreturn_t vc4_crtc_irq_handler(int irq, void *data) | |
| { | |
| struct vc4_crtc *vc4_crtc = data; | |
| u32 stat = CRTC_READ(PV_INTSTAT); | |
| irqreturn_t ret = IRQ_NONE; | |
| if (stat & PV_INT_VFP_START) { | |
| CRTC_WRITE(PV_INTSTAT, PV_INT_VFP_START); | |
| drm_crtc_handle_vblank(&vc4_crtc->base); | |
| vc4_crtc_handle_page_flip(vc4_crtc); | |
| ret = IRQ_HANDLED; | |
| } | |
| return ret; | |
| } | |
| static const struct drm_crtc_funcs vc4_crtc_funcs = { | |
| .set_config = drm_atomic_helper_set_config, | |
| .destroy = vc4_crtc_destroy, | |
| .page_flip = drm_atomic_helper_page_flip, | |
| .set_property = NULL, | |
| .cursor_set = NULL, /* handled by drm_mode_cursor_universal */ | |
| .cursor_move = NULL, /* handled by drm_mode_cursor_universal */ | |
| .reset = drm_atomic_helper_crtc_reset, | |
| .atomic_duplicate_state = drm_atomic_helper_crtc_duplicate_state, | |
| .atomic_destroy_state = drm_atomic_helper_crtc_destroy_state, | |
| }; | |
| static const struct drm_crtc_helper_funcs vc4_crtc_helper_funcs = { | |
| .mode_set_nofb = vc4_crtc_mode_set_nofb, | |
| .disable = vc4_crtc_disable, | |
| .enable = vc4_crtc_enable, | |
| .atomic_check = vc4_crtc_atomic_check, | |
| .atomic_flush = vc4_crtc_atomic_flush, | |
| }; | |
| /* Frees the page flip event when the DRM device is closed with the | |
| * event still outstanding. | |
| */ | |
| void vc4_cancel_page_flip(struct drm_crtc *crtc, struct drm_file *file) | |
| { | |
| struct vc4_crtc *vc4_crtc = to_vc4_crtc(crtc); | |
| struct drm_device *dev = crtc->dev; | |
| unsigned long flags; | |
| spin_lock_irqsave(&dev->event_lock, flags); | |
| if (vc4_crtc->event && vc4_crtc->event->base.file_priv == file) { | |
| vc4_crtc->event->base.destroy(&vc4_crtc->event->base); | |
| drm_crtc_vblank_put(crtc); | |
| vc4_crtc->event = NULL; | |
| } | |
| spin_unlock_irqrestore(&dev->event_lock, flags); | |
| } | |
| static const struct vc4_crtc_data pv0_data = { | |
| .hvs_channel = 0, | |
| .encoder0_type = VC4_ENCODER_TYPE_DSI0, | |
| .encoder1_type = VC4_ENCODER_TYPE_DPI, | |
| }; | |
| static const struct vc4_crtc_data pv1_data = { | |
| .hvs_channel = 2, | |
| .encoder0_type = VC4_ENCODER_TYPE_DSI1, | |
| .encoder1_type = VC4_ENCODER_TYPE_SMI, | |
| }; | |
| static const struct vc4_crtc_data pv2_data = { | |
| .hvs_channel = 1, | |
| .encoder0_type = VC4_ENCODER_TYPE_VEC, | |
| .encoder1_type = VC4_ENCODER_TYPE_HDMI, | |
| }; | |
| static const struct of_device_id vc4_crtc_dt_match[] = { | |
| { .compatible = "brcm,bcm2835-pixelvalve0", .data = &pv0_data }, | |
| { .compatible = "brcm,bcm2835-pixelvalve1", .data = &pv1_data }, | |
| { .compatible = "brcm,bcm2835-pixelvalve2", .data = &pv2_data }, | |
| {} | |
| }; | |
| static void vc4_set_crtc_possible_masks(struct drm_device *drm, | |
| struct drm_crtc *crtc) | |
| { | |
| struct vc4_crtc *vc4_crtc = to_vc4_crtc(crtc); | |
| struct drm_encoder *encoder; | |
| drm_for_each_encoder(encoder, drm) { | |
| struct vc4_encoder *vc4_encoder = to_vc4_encoder(encoder); | |
| if (vc4_encoder->type == vc4_crtc->data->encoder0_type) { | |
| vc4_encoder->clock_select = 0; | |
| encoder->possible_crtcs |= drm_crtc_mask(crtc); | |
| } else if (vc4_encoder->type == vc4_crtc->data->encoder1_type) { | |
| vc4_encoder->clock_select = 1; | |
| encoder->possible_crtcs |= drm_crtc_mask(crtc); | |
| } | |
| } | |
| } | |
| static int vc4_crtc_bind(struct device *dev, struct device *master, void *data) | |
| { | |
| struct platform_device *pdev = to_platform_device(dev); | |
| struct drm_device *drm = dev_get_drvdata(master); | |
| struct vc4_dev *vc4 = to_vc4_dev(drm); | |
| struct vc4_crtc *vc4_crtc; | |
| struct drm_crtc *crtc; | |
| struct drm_plane *primary_plane, *cursor_plane; | |
| const struct of_device_id *match; | |
| int ret; | |
| vc4_crtc = devm_kzalloc(dev, sizeof(*vc4_crtc), GFP_KERNEL); | |
| if (!vc4_crtc) | |
| return -ENOMEM; | |
| crtc = &vc4_crtc->base; | |
| match = of_match_device(vc4_crtc_dt_match, dev); | |
| if (!match) | |
| return -ENODEV; | |
| vc4_crtc->data = match->data; | |
| vc4_crtc->regs = vc4_ioremap_regs(pdev, 0); | |
| if (IS_ERR(vc4_crtc->regs)) | |
| return PTR_ERR(vc4_crtc->regs); | |
| /* For now, we create just the primary and the legacy cursor | |
| * planes. We should be able to stack more planes on easily, | |
| * but to do that we would need to compute the bandwidth | |
| * requirement of the plane configuration, and reject ones | |
| * that will take too much. | |
| */ | |
| primary_plane = vc4_plane_init(drm, DRM_PLANE_TYPE_PRIMARY); | |
| if (IS_ERR(primary_plane)) { | |
| dev_err(dev, "failed to construct primary plane\n"); | |
| ret = PTR_ERR(primary_plane); | |
| goto err; | |
| } | |
| cursor_plane = vc4_plane_init(drm, DRM_PLANE_TYPE_CURSOR); | |
| if (IS_ERR(cursor_plane)) { | |
| dev_err(dev, "failed to construct cursor plane\n"); | |
| ret = PTR_ERR(cursor_plane); | |
| goto err_primary; | |
| } | |
| drm_crtc_init_with_planes(drm, crtc, primary_plane, cursor_plane, | |
| &vc4_crtc_funcs); | |
| drm_crtc_helper_add(crtc, &vc4_crtc_helper_funcs); | |
| primary_plane->crtc = crtc; | |
| cursor_plane->crtc = crtc; | |
| vc4->crtc[drm_crtc_index(crtc)] = vc4_crtc; | |
| vc4_crtc->channel = vc4_crtc->data->hvs_channel; | |
| CRTC_WRITE(PV_INTEN, 0); | |
| CRTC_WRITE(PV_INTSTAT, PV_INT_VFP_START); | |
| ret = devm_request_irq(dev, platform_get_irq(pdev, 0), | |
| vc4_crtc_irq_handler, 0, "vc4 crtc", vc4_crtc); | |
| if (ret) | |
| goto err_cursor; | |
| vc4_set_crtc_possible_masks(drm, crtc); | |
| platform_set_drvdata(pdev, vc4_crtc); | |
| return 0; | |
| err_cursor: | |
| cursor_plane->funcs->destroy(cursor_plane); | |
| err_primary: | |
| primary_plane->funcs->destroy(primary_plane); | |
| err: | |
| return ret; | |
| } | |
| static void vc4_crtc_unbind(struct device *dev, struct device *master, | |
| void *data) | |
| { | |
| struct platform_device *pdev = to_platform_device(dev); | |
| struct vc4_crtc *vc4_crtc = dev_get_drvdata(dev); | |
| vc4_crtc_destroy(&vc4_crtc->base); | |
| CRTC_WRITE(PV_INTEN, 0); | |
| platform_set_drvdata(pdev, NULL); | |
| } | |
| static const struct component_ops vc4_crtc_ops = { | |
| .bind = vc4_crtc_bind, | |
| .unbind = vc4_crtc_unbind, | |
| }; | |
| static int vc4_crtc_dev_probe(struct platform_device *pdev) | |
| { | |
| return component_add(&pdev->dev, &vc4_crtc_ops); | |
| } | |
| static int vc4_crtc_dev_remove(struct platform_device *pdev) | |
| { | |
| component_del(&pdev->dev, &vc4_crtc_ops); | |
| return 0; | |
| } | |
| struct platform_driver vc4_crtc_driver = { | |
| .probe = vc4_crtc_dev_probe, | |
| .remove = vc4_crtc_dev_remove, | |
| .driver = { | |
| .name = "vc4_crtc", | |
| .of_match_table = vc4_crtc_dt_match, | |
| }, | |
| }; |