| /* | |
| * I2C driver for the Renesas EMEV2 SoC | |
| * | |
| * Copyright (C) 2015 Wolfram Sang <wsa@sang-engineering.com> | |
| * Copyright 2013 Codethink Ltd. | |
| * Copyright 2010-2015 Renesas Electronics Corporation | |
| * | |
| * This program is free software; you can redistribute it and/or modify | |
| * it under the terms of the GNU General Public License version 2 | |
| * as published by the Free Software Foundation. | |
| */ | |
| #include <linux/clk.h> | |
| #include <linux/completion.h> | |
| #include <linux/device.h> | |
| #include <linux/i2c.h> | |
| #include <linux/init.h> | |
| #include <linux/interrupt.h> | |
| #include <linux/io.h> | |
| #include <linux/kernel.h> | |
| #include <linux/module.h> | |
| #include <linux/of_device.h> | |
| #include <linux/platform_device.h> | |
| #include <linux/sched.h> | |
| /* I2C Registers */ | |
| #define I2C_OFS_IICACT0 0x00 /* start */ | |
| #define I2C_OFS_IIC0 0x04 /* shift */ | |
| #define I2C_OFS_IICC0 0x08 /* control */ | |
| #define I2C_OFS_SVA0 0x0c /* slave address */ | |
| #define I2C_OFS_IICCL0 0x10 /* clock select */ | |
| #define I2C_OFS_IICX0 0x14 /* extension */ | |
| #define I2C_OFS_IICS0 0x18 /* status */ | |
| #define I2C_OFS_IICSE0 0x1c /* status For emulation */ | |
| #define I2C_OFS_IICF0 0x20 /* IIC flag */ | |
| /* I2C IICACT0 Masks */ | |
| #define I2C_BIT_IICE0 0x0001 | |
| /* I2C IICC0 Masks */ | |
| #define I2C_BIT_LREL0 0x0040 | |
| #define I2C_BIT_WREL0 0x0020 | |
| #define I2C_BIT_SPIE0 0x0010 | |
| #define I2C_BIT_WTIM0 0x0008 | |
| #define I2C_BIT_ACKE0 0x0004 | |
| #define I2C_BIT_STT0 0x0002 | |
| #define I2C_BIT_SPT0 0x0001 | |
| /* I2C IICCL0 Masks */ | |
| #define I2C_BIT_SMC0 0x0008 | |
| #define I2C_BIT_DFC0 0x0004 | |
| /* I2C IICSE0 Masks */ | |
| #define I2C_BIT_MSTS0 0x0080 | |
| #define I2C_BIT_ALD0 0x0040 | |
| #define I2C_BIT_EXC0 0x0020 | |
| #define I2C_BIT_COI0 0x0010 | |
| #define I2C_BIT_TRC0 0x0008 | |
| #define I2C_BIT_ACKD0 0x0004 | |
| #define I2C_BIT_STD0 0x0002 | |
| #define I2C_BIT_SPD0 0x0001 | |
| /* I2C IICF0 Masks */ | |
| #define I2C_BIT_STCF 0x0080 | |
| #define I2C_BIT_IICBSY 0x0040 | |
| #define I2C_BIT_STCEN 0x0002 | |
| #define I2C_BIT_IICRSV 0x0001 | |
| struct em_i2c_device { | |
| void __iomem *base; | |
| struct i2c_adapter adap; | |
| struct completion msg_done; | |
| struct clk *sclk; | |
| }; | |
| static inline void em_clear_set_bit(struct em_i2c_device *priv, u8 clear, u8 set, u8 reg) | |
| { | |
| writeb((readb(priv->base + reg) & ~clear) | set, priv->base + reg); | |
| } | |
| static int em_i2c_wait_for_event(struct em_i2c_device *priv) | |
| { | |
| unsigned long time_left; | |
| int status; | |
| reinit_completion(&priv->msg_done); | |
| time_left = wait_for_completion_timeout(&priv->msg_done, priv->adap.timeout); | |
| if (!time_left) | |
| return -ETIMEDOUT; | |
| status = readb(priv->base + I2C_OFS_IICSE0); | |
| return status & I2C_BIT_ALD0 ? -EAGAIN : status; | |
| } | |
| static void em_i2c_stop(struct em_i2c_device *priv) | |
| { | |
| /* Send Stop condition */ | |
| em_clear_set_bit(priv, 0, I2C_BIT_SPT0 | I2C_BIT_SPIE0, I2C_OFS_IICC0); | |
| /* Wait for stop condition */ | |
| em_i2c_wait_for_event(priv); | |
| } | |
| static void em_i2c_reset(struct i2c_adapter *adap) | |
| { | |
| struct em_i2c_device *priv = i2c_get_adapdata(adap); | |
| int retr; | |
| /* If I2C active */ | |
| if (readb(priv->base + I2C_OFS_IICACT0) & I2C_BIT_IICE0) { | |
| /* Disable I2C operation */ | |
| writeb(0, priv->base + I2C_OFS_IICACT0); | |
| retr = 1000; | |
| while (readb(priv->base + I2C_OFS_IICACT0) == 1 && retr) | |
| retr--; | |
| WARN_ON(retr == 0); | |
| } | |
| /* Transfer mode set */ | |
| writeb(I2C_BIT_DFC0, priv->base + I2C_OFS_IICCL0); | |
| /* Can Issue start without detecting a stop, Reservation disabled. */ | |
| writeb(I2C_BIT_STCEN | I2C_BIT_IICRSV, priv->base + I2C_OFS_IICF0); | |
| /* I2C enable, 9 bit interrupt mode */ | |
| writeb(I2C_BIT_WTIM0, priv->base + I2C_OFS_IICC0); | |
| /* Enable I2C operation */ | |
| writeb(I2C_BIT_IICE0, priv->base + I2C_OFS_IICACT0); | |
| retr = 1000; | |
| while (readb(priv->base + I2C_OFS_IICACT0) == 0 && retr) | |
| retr--; | |
| WARN_ON(retr == 0); | |
| } | |
| static int __em_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg *msg, | |
| int stop) | |
| { | |
| struct em_i2c_device *priv = i2c_get_adapdata(adap); | |
| int count, status, read = !!(msg->flags & I2C_M_RD); | |
| /* Send start condition */ | |
| em_clear_set_bit(priv, 0, I2C_BIT_ACKE0 | I2C_BIT_WTIM0, I2C_OFS_IICC0); | |
| em_clear_set_bit(priv, 0, I2C_BIT_STT0, I2C_OFS_IICC0); | |
| /* Send slave address and R/W type */ | |
| writeb((msg->addr << 1) | read, priv->base + I2C_OFS_IIC0); | |
| /* Wait for transaction */ | |
| status = em_i2c_wait_for_event(priv); | |
| if (status < 0) | |
| goto out_reset; | |
| /* Received NACK (result of setting slave address and R/W) */ | |
| if (!(status & I2C_BIT_ACKD0)) { | |
| em_i2c_stop(priv); | |
| goto out; | |
| } | |
| /* Extra setup for read transactions */ | |
| if (read) { | |
| /* 8 bit interrupt mode */ | |
| em_clear_set_bit(priv, I2C_BIT_WTIM0, I2C_BIT_ACKE0, I2C_OFS_IICC0); | |
| em_clear_set_bit(priv, I2C_BIT_WTIM0, I2C_BIT_WREL0, I2C_OFS_IICC0); | |
| /* Wait for transaction */ | |
| status = em_i2c_wait_for_event(priv); | |
| if (status < 0) | |
| goto out_reset; | |
| } | |
| /* Send / receive data */ | |
| for (count = 0; count < msg->len; count++) { | |
| if (read) { /* Read transaction */ | |
| msg->buf[count] = readb(priv->base + I2C_OFS_IIC0); | |
| em_clear_set_bit(priv, 0, I2C_BIT_WREL0, I2C_OFS_IICC0); | |
| } else { /* Write transaction */ | |
| /* Received NACK */ | |
| if (!(status & I2C_BIT_ACKD0)) { | |
| em_i2c_stop(priv); | |
| goto out; | |
| } | |
| /* Write data */ | |
| writeb(msg->buf[count], priv->base + I2C_OFS_IIC0); | |
| } | |
| /* Wait for R/W transaction */ | |
| status = em_i2c_wait_for_event(priv); | |
| if (status < 0) | |
| goto out_reset; | |
| } | |
| if (stop) | |
| em_i2c_stop(priv); | |
| return count; | |
| out_reset: | |
| em_i2c_reset(adap); | |
| out: | |
| return status < 0 ? status : -ENXIO; | |
| } | |
| static int em_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, | |
| int num) | |
| { | |
| struct em_i2c_device *priv = i2c_get_adapdata(adap); | |
| int ret, i; | |
| if (readb(priv->base + I2C_OFS_IICF0) & I2C_BIT_IICBSY) | |
| return -EAGAIN; | |
| for (i = 0; i < num; i++) { | |
| ret = __em_i2c_xfer(adap, &msgs[i], (i == (num - 1))); | |
| if (ret < 0) | |
| return ret; | |
| } | |
| /* I2C transfer completed */ | |
| return num; | |
| } | |
| static irqreturn_t em_i2c_irq_handler(int this_irq, void *dev_id) | |
| { | |
| struct em_i2c_device *priv = dev_id; | |
| complete(&priv->msg_done); | |
| return IRQ_HANDLED; | |
| } | |
| static u32 em_i2c_func(struct i2c_adapter *adap) | |
| { | |
| return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL; | |
| } | |
| static struct i2c_algorithm em_i2c_algo = { | |
| .master_xfer = em_i2c_xfer, | |
| .functionality = em_i2c_func, | |
| }; | |
| static int em_i2c_probe(struct platform_device *pdev) | |
| { | |
| struct em_i2c_device *priv; | |
| struct resource *r; | |
| int irq, ret; | |
| priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL); | |
| if (!priv) | |
| return -ENOMEM; | |
| r = platform_get_resource(pdev, IORESOURCE_MEM, 0); | |
| priv->base = devm_ioremap_resource(&pdev->dev, r); | |
| if (IS_ERR(priv->base)) | |
| return PTR_ERR(priv->base); | |
| strlcpy(priv->adap.name, "EMEV2 I2C", sizeof(priv->adap.name)); | |
| priv->sclk = devm_clk_get(&pdev->dev, "sclk"); | |
| if (IS_ERR(priv->sclk)) | |
| return PTR_ERR(priv->sclk); | |
| clk_prepare_enable(priv->sclk); | |
| priv->adap.timeout = msecs_to_jiffies(100); | |
| priv->adap.retries = 5; | |
| priv->adap.dev.parent = &pdev->dev; | |
| priv->adap.algo = &em_i2c_algo; | |
| priv->adap.owner = THIS_MODULE; | |
| priv->adap.dev.of_node = pdev->dev.of_node; | |
| init_completion(&priv->msg_done); | |
| platform_set_drvdata(pdev, priv); | |
| i2c_set_adapdata(&priv->adap, priv); | |
| em_i2c_reset(&priv->adap); | |
| irq = platform_get_irq(pdev, 0); | |
| ret = devm_request_irq(&pdev->dev, irq, em_i2c_irq_handler, 0, | |
| "em_i2c", priv); | |
| if (ret) | |
| goto err_clk; | |
| ret = i2c_add_adapter(&priv->adap); | |
| if (ret) | |
| goto err_clk; | |
| dev_info(&pdev->dev, "Added i2c controller %d, irq %d\n", priv->adap.nr, irq); | |
| return 0; | |
| err_clk: | |
| clk_disable_unprepare(priv->sclk); | |
| return ret; | |
| } | |
| static int em_i2c_remove(struct platform_device *dev) | |
| { | |
| struct em_i2c_device *priv = platform_get_drvdata(dev); | |
| i2c_del_adapter(&priv->adap); | |
| clk_disable_unprepare(priv->sclk); | |
| return 0; | |
| } | |
| static const struct of_device_id em_i2c_ids[] = { | |
| { .compatible = "renesas,iic-emev2", }, | |
| { } | |
| }; | |
| static struct platform_driver em_i2c_driver = { | |
| .probe = em_i2c_probe, | |
| .remove = em_i2c_remove, | |
| .driver = { | |
| .name = "em-i2c", | |
| .of_match_table = em_i2c_ids, | |
| } | |
| }; | |
| module_platform_driver(em_i2c_driver); | |
| MODULE_DESCRIPTION("EMEV2 I2C bus driver"); | |
| MODULE_AUTHOR("Ian Molton and Wolfram Sang <wsa@sang-engineering.com>"); | |
| MODULE_LICENSE("GPL v2"); | |
| MODULE_DEVICE_TABLE(of, em_i2c_ids); |