| /* | |
| * Copyright (C) ST-Ericsson AB 2010 | |
| * Author: Daniel Martensson | |
| * License terms: GNU General Public License (GPL) version 2. | |
| */ | |
| #include <linux/module.h> | |
| #include <linux/device.h> | |
| #include <linux/platform_device.h> | |
| #include <linux/string.h> | |
| #include <linux/semaphore.h> | |
| #include <linux/workqueue.h> | |
| #include <linux/completion.h> | |
| #include <linux/list.h> | |
| #include <linux/interrupt.h> | |
| #include <linux/dma-mapping.h> | |
| #include <linux/delay.h> | |
| #include <linux/sched.h> | |
| #include <linux/debugfs.h> | |
| #include <net/caif/caif_spi.h> | |
| #ifndef CONFIG_CAIF_SPI_SYNC | |
| #define SPI_DATA_POS 0 | |
| static inline int forward_to_spi_cmd(struct cfspi *cfspi) | |
| { | |
| return cfspi->rx_cpck_len; | |
| } | |
| #else | |
| #define SPI_DATA_POS SPI_CMD_SZ | |
| static inline int forward_to_spi_cmd(struct cfspi *cfspi) | |
| { | |
| return 0; | |
| } | |
| #endif | |
| int spi_frm_align = 2; | |
| /* | |
| * SPI padding options. | |
| * Warning: must be a base of 2 (& operation used) and can not be zero ! | |
| */ | |
| int spi_up_head_align = 1 << 1; | |
| int spi_up_tail_align = 1 << 0; | |
| int spi_down_head_align = 1 << 2; | |
| int spi_down_tail_align = 1 << 1; | |
| #ifdef CONFIG_DEBUG_FS | |
| static inline void debugfs_store_prev(struct cfspi *cfspi) | |
| { | |
| /* Store previous command for debugging reasons.*/ | |
| cfspi->pcmd = cfspi->cmd; | |
| /* Store previous transfer. */ | |
| cfspi->tx_ppck_len = cfspi->tx_cpck_len; | |
| cfspi->rx_ppck_len = cfspi->rx_cpck_len; | |
| } | |
| #else | |
| static inline void debugfs_store_prev(struct cfspi *cfspi) | |
| { | |
| } | |
| #endif | |
| void cfspi_xfer(struct work_struct *work) | |
| { | |
| struct cfspi *cfspi; | |
| u8 *ptr = NULL; | |
| unsigned long flags; | |
| int ret; | |
| cfspi = container_of(work, struct cfspi, work); | |
| /* Initialize state. */ | |
| cfspi->cmd = SPI_CMD_EOT; | |
| for (;;) { | |
| cfspi_dbg_state(cfspi, CFSPI_STATE_WAITING); | |
| /* Wait for master talk or transmit event. */ | |
| wait_event_interruptible(cfspi->wait, | |
| test_bit(SPI_XFER, &cfspi->state) || | |
| test_bit(SPI_TERMINATE, &cfspi->state)); | |
| if (test_bit(SPI_TERMINATE, &cfspi->state)) | |
| return; | |
| #if CFSPI_DBG_PREFILL | |
| /* Prefill buffers for easier debugging. */ | |
| memset(cfspi->xfer.va_tx, 0xFF, SPI_DMA_BUF_LEN); | |
| memset(cfspi->xfer.va_rx, 0xFF, SPI_DMA_BUF_LEN); | |
| #endif /* CFSPI_DBG_PREFILL */ | |
| cfspi_dbg_state(cfspi, CFSPI_STATE_AWAKE); | |
| /* Check whether we have a committed frame. */ | |
| if (cfspi->tx_cpck_len) { | |
| int len; | |
| cfspi_dbg_state(cfspi, CFSPI_STATE_FETCH_PKT); | |
| /* Copy committed SPI frames after the SPI indication. */ | |
| ptr = (u8 *) cfspi->xfer.va_tx; | |
| ptr += SPI_IND_SZ; | |
| len = cfspi_xmitfrm(cfspi, ptr, cfspi->tx_cpck_len); | |
| WARN_ON(len != cfspi->tx_cpck_len); | |
| } | |
| cfspi_dbg_state(cfspi, CFSPI_STATE_GET_NEXT); | |
| /* Get length of next frame to commit. */ | |
| cfspi->tx_npck_len = cfspi_xmitlen(cfspi); | |
| WARN_ON(cfspi->tx_npck_len > SPI_DMA_BUF_LEN); | |
| /* | |
| * Add indication and length at the beginning of the frame, | |
| * using little endian. | |
| */ | |
| ptr = (u8 *) cfspi->xfer.va_tx; | |
| *ptr++ = SPI_CMD_IND; | |
| *ptr++ = (SPI_CMD_IND & 0xFF00) >> 8; | |
| *ptr++ = cfspi->tx_npck_len & 0x00FF; | |
| *ptr++ = (cfspi->tx_npck_len & 0xFF00) >> 8; | |
| /* Calculate length of DMAs. */ | |
| cfspi->xfer.tx_dma_len = cfspi->tx_cpck_len + SPI_IND_SZ; | |
| cfspi->xfer.rx_dma_len = cfspi->rx_cpck_len + SPI_CMD_SZ; | |
| /* Add SPI TX frame alignment padding, if necessary. */ | |
| if (cfspi->tx_cpck_len && | |
| (cfspi->xfer.tx_dma_len % spi_frm_align)) { | |
| cfspi->xfer.tx_dma_len += spi_frm_align - | |
| (cfspi->xfer.tx_dma_len % spi_frm_align); | |
| } | |
| /* Add SPI RX frame alignment padding, if necessary. */ | |
| if (cfspi->rx_cpck_len && | |
| (cfspi->xfer.rx_dma_len % spi_frm_align)) { | |
| cfspi->xfer.rx_dma_len += spi_frm_align - | |
| (cfspi->xfer.rx_dma_len % spi_frm_align); | |
| } | |
| cfspi_dbg_state(cfspi, CFSPI_STATE_INIT_XFER); | |
| /* Start transfer. */ | |
| ret = cfspi->dev->init_xfer(&cfspi->xfer, cfspi->dev); | |
| WARN_ON(ret); | |
| cfspi_dbg_state(cfspi, CFSPI_STATE_WAIT_ACTIVE); | |
| /* | |
| * TODO: We might be able to make an assumption if this is the | |
| * first loop. Make sure that minimum toggle time is respected. | |
| */ | |
| udelay(MIN_TRANSITION_TIME_USEC); | |
| cfspi_dbg_state(cfspi, CFSPI_STATE_SIG_ACTIVE); | |
| /* Signal that we are ready to receive data. */ | |
| cfspi->dev->sig_xfer(true, cfspi->dev); | |
| cfspi_dbg_state(cfspi, CFSPI_STATE_WAIT_XFER_DONE); | |
| /* Wait for transfer completion. */ | |
| wait_for_completion(&cfspi->comp); | |
| cfspi_dbg_state(cfspi, CFSPI_STATE_XFER_DONE); | |
| if (cfspi->cmd == SPI_CMD_EOT) { | |
| /* | |
| * Clear the master talk bit. A xfer is always at | |
| * least two bursts. | |
| */ | |
| clear_bit(SPI_SS_ON, &cfspi->state); | |
| } | |
| cfspi_dbg_state(cfspi, CFSPI_STATE_WAIT_INACTIVE); | |
| /* Make sure that the minimum toggle time is respected. */ | |
| if (SPI_XFER_TIME_USEC(cfspi->xfer.tx_dma_len, | |
| cfspi->dev->clk_mhz) < | |
| MIN_TRANSITION_TIME_USEC) { | |
| udelay(MIN_TRANSITION_TIME_USEC - | |
| SPI_XFER_TIME_USEC | |
| (cfspi->xfer.tx_dma_len, cfspi->dev->clk_mhz)); | |
| } | |
| cfspi_dbg_state(cfspi, CFSPI_STATE_SIG_INACTIVE); | |
| /* De-assert transfer signal. */ | |
| cfspi->dev->sig_xfer(false, cfspi->dev); | |
| /* Check whether we received a CAIF packet. */ | |
| if (cfspi->rx_cpck_len) { | |
| int len; | |
| cfspi_dbg_state(cfspi, CFSPI_STATE_DELIVER_PKT); | |
| /* Parse SPI frame. */ | |
| ptr = ((u8 *)(cfspi->xfer.va_rx + SPI_DATA_POS)); | |
| len = cfspi_rxfrm(cfspi, ptr, cfspi->rx_cpck_len); | |
| WARN_ON(len != cfspi->rx_cpck_len); | |
| } | |
| /* Check the next SPI command and length. */ | |
| ptr = (u8 *) cfspi->xfer.va_rx; | |
| ptr += forward_to_spi_cmd(cfspi); | |
| cfspi->cmd = *ptr++; | |
| cfspi->cmd |= ((*ptr++) << 8) & 0xFF00; | |
| cfspi->rx_npck_len = *ptr++; | |
| cfspi->rx_npck_len |= ((*ptr++) << 8) & 0xFF00; | |
| WARN_ON(cfspi->rx_npck_len > SPI_DMA_BUF_LEN); | |
| WARN_ON(cfspi->cmd > SPI_CMD_EOT); | |
| debugfs_store_prev(cfspi); | |
| /* Check whether the master issued an EOT command. */ | |
| if (cfspi->cmd == SPI_CMD_EOT) { | |
| /* Reset state. */ | |
| cfspi->tx_cpck_len = 0; | |
| cfspi->rx_cpck_len = 0; | |
| } else { | |
| /* Update state. */ | |
| cfspi->tx_cpck_len = cfspi->tx_npck_len; | |
| cfspi->rx_cpck_len = cfspi->rx_npck_len; | |
| } | |
| /* | |
| * Check whether we need to clear the xfer bit. | |
| * Spin lock needed for packet insertion. | |
| * Test and clear of different bits | |
| * are not supported. | |
| */ | |
| spin_lock_irqsave(&cfspi->lock, flags); | |
| if (cfspi->cmd == SPI_CMD_EOT && !cfspi_xmitlen(cfspi) | |
| && !test_bit(SPI_SS_ON, &cfspi->state)) | |
| clear_bit(SPI_XFER, &cfspi->state); | |
| spin_unlock_irqrestore(&cfspi->lock, flags); | |
| } | |
| } | |
| struct platform_driver cfspi_spi_driver = { | |
| .probe = cfspi_spi_probe, | |
| .remove = cfspi_spi_remove, | |
| .driver = { | |
| .name = "cfspi_sspi", | |
| .owner = THIS_MODULE, | |
| }, | |
| }; |