| /* | |
| * Blackfin On-Chip CAN Driver | |
| * | |
| * Copyright 2004-2009 Analog Devices Inc. | |
| * | |
| * Enter bugs at http://blackfin.uclinux.org/ | |
| * | |
| * Licensed under the GPL-2 or later. | |
| */ | |
| #include <linux/module.h> | |
| #include <linux/kernel.h> | |
| #include <linux/bitops.h> | |
| #include <linux/interrupt.h> | |
| #include <linux/errno.h> | |
| #include <linux/netdevice.h> | |
| #include <linux/skbuff.h> | |
| #include <linux/platform_device.h> | |
| #include <linux/can/dev.h> | |
| #include <linux/can/error.h> | |
| #include <asm/portmux.h> | |
| #define DRV_NAME "bfin_can" | |
| #define BFIN_CAN_TIMEOUT 100 | |
| #define TX_ECHO_SKB_MAX 1 | |
| /* transmit and receive channels */ | |
| #define TRANSMIT_CHL 24 | |
| #define RECEIVE_STD_CHL 0 | |
| #define RECEIVE_EXT_CHL 4 | |
| #define RECEIVE_RTR_CHL 8 | |
| #define RECEIVE_EXT_RTR_CHL 12 | |
| #define MAX_CHL_NUMBER 32 | |
| /* All Blackfin system MMRs are padded to 32bits even if the register | |
| * itself is only 16bits. So use a helper macro to streamline this | |
| */ | |
| #define __BFP(m) u16 m; u16 __pad_##m | |
| /* bfin can registers layout */ | |
| struct bfin_can_mask_regs { | |
| __BFP(aml); | |
| __BFP(amh); | |
| }; | |
| struct bfin_can_channel_regs { | |
| /* data[0,2,4,6] -> data{0,1,2,3} while data[1,3,5,7] is padding */ | |
| u16 data[8]; | |
| __BFP(dlc); | |
| __BFP(tsv); | |
| __BFP(id0); | |
| __BFP(id1); | |
| }; | |
| struct bfin_can_regs { | |
| /* global control and status registers */ | |
| __BFP(mc1); /* offset 0x00 */ | |
| __BFP(md1); /* offset 0x04 */ | |
| __BFP(trs1); /* offset 0x08 */ | |
| __BFP(trr1); /* offset 0x0c */ | |
| __BFP(ta1); /* offset 0x10 */ | |
| __BFP(aa1); /* offset 0x14 */ | |
| __BFP(rmp1); /* offset 0x18 */ | |
| __BFP(rml1); /* offset 0x1c */ | |
| __BFP(mbtif1); /* offset 0x20 */ | |
| __BFP(mbrif1); /* offset 0x24 */ | |
| __BFP(mbim1); /* offset 0x28 */ | |
| __BFP(rfh1); /* offset 0x2c */ | |
| __BFP(opss1); /* offset 0x30 */ | |
| u32 __pad1[3]; | |
| __BFP(mc2); /* offset 0x40 */ | |
| __BFP(md2); /* offset 0x44 */ | |
| __BFP(trs2); /* offset 0x48 */ | |
| __BFP(trr2); /* offset 0x4c */ | |
| __BFP(ta2); /* offset 0x50 */ | |
| __BFP(aa2); /* offset 0x54 */ | |
| __BFP(rmp2); /* offset 0x58 */ | |
| __BFP(rml2); /* offset 0x5c */ | |
| __BFP(mbtif2); /* offset 0x60 */ | |
| __BFP(mbrif2); /* offset 0x64 */ | |
| __BFP(mbim2); /* offset 0x68 */ | |
| __BFP(rfh2); /* offset 0x6c */ | |
| __BFP(opss2); /* offset 0x70 */ | |
| u32 __pad2[3]; | |
| __BFP(clock); /* offset 0x80 */ | |
| __BFP(timing); /* offset 0x84 */ | |
| __BFP(debug); /* offset 0x88 */ | |
| __BFP(status); /* offset 0x8c */ | |
| __BFP(cec); /* offset 0x90 */ | |
| __BFP(gis); /* offset 0x94 */ | |
| __BFP(gim); /* offset 0x98 */ | |
| __BFP(gif); /* offset 0x9c */ | |
| __BFP(control); /* offset 0xa0 */ | |
| __BFP(intr); /* offset 0xa4 */ | |
| __BFP(version); /* offset 0xa8 */ | |
| __BFP(mbtd); /* offset 0xac */ | |
| __BFP(ewr); /* offset 0xb0 */ | |
| __BFP(esr); /* offset 0xb4 */ | |
| u32 __pad3[2]; | |
| __BFP(ucreg); /* offset 0xc0 */ | |
| __BFP(uccnt); /* offset 0xc4 */ | |
| __BFP(ucrc); /* offset 0xc8 */ | |
| __BFP(uccnf); /* offset 0xcc */ | |
| u32 __pad4[1]; | |
| __BFP(version2); /* offset 0xd4 */ | |
| u32 __pad5[10]; | |
| /* channel(mailbox) mask and message registers */ | |
| struct bfin_can_mask_regs msk[MAX_CHL_NUMBER]; /* offset 0x100 */ | |
| struct bfin_can_channel_regs chl[MAX_CHL_NUMBER]; /* offset 0x200 */ | |
| }; | |
| #undef __BFP | |
| #define SRS 0x0001 /* Software Reset */ | |
| #define SER 0x0008 /* Stuff Error */ | |
| #define BOIM 0x0008 /* Enable Bus Off Interrupt */ | |
| #define CCR 0x0080 /* CAN Configuration Mode Request */ | |
| #define CCA 0x0080 /* Configuration Mode Acknowledge */ | |
| #define SAM 0x0080 /* Sampling */ | |
| #define AME 0x8000 /* Acceptance Mask Enable */ | |
| #define RMLIM 0x0080 /* Enable RX Message Lost Interrupt */ | |
| #define RMLIS 0x0080 /* RX Message Lost IRQ Status */ | |
| #define RTR 0x4000 /* Remote Frame Transmission Request */ | |
| #define BOIS 0x0008 /* Bus Off IRQ Status */ | |
| #define IDE 0x2000 /* Identifier Extension */ | |
| #define EPIS 0x0004 /* Error-Passive Mode IRQ Status */ | |
| #define EPIM 0x0004 /* Enable Error-Passive Mode Interrupt */ | |
| #define EWTIS 0x0001 /* TX Error Count IRQ Status */ | |
| #define EWRIS 0x0002 /* RX Error Count IRQ Status */ | |
| #define BEF 0x0040 /* Bit Error Flag */ | |
| #define FER 0x0080 /* Form Error Flag */ | |
| #define SMR 0x0020 /* Sleep Mode Request */ | |
| #define SMACK 0x0008 /* Sleep Mode Acknowledge */ | |
| /* | |
| * bfin can private data | |
| */ | |
| struct bfin_can_priv { | |
| struct can_priv can; /* must be the first member */ | |
| struct net_device *dev; | |
| void __iomem *membase; | |
| int rx_irq; | |
| int tx_irq; | |
| int err_irq; | |
| unsigned short *pin_list; | |
| }; | |
| /* | |
| * bfin can timing parameters | |
| */ | |
| static const struct can_bittiming_const bfin_can_bittiming_const = { | |
| .name = DRV_NAME, | |
| .tseg1_min = 1, | |
| .tseg1_max = 16, | |
| .tseg2_min = 1, | |
| .tseg2_max = 8, | |
| .sjw_max = 4, | |
| /* | |
| * Although the BRP field can be set to any value, it is recommended | |
| * that the value be greater than or equal to 4, as restrictions | |
| * apply to the bit timing configuration when BRP is less than 4. | |
| */ | |
| .brp_min = 4, | |
| .brp_max = 1024, | |
| .brp_inc = 1, | |
| }; | |
| static int bfin_can_set_bittiming(struct net_device *dev) | |
| { | |
| struct bfin_can_priv *priv = netdev_priv(dev); | |
| struct bfin_can_regs __iomem *reg = priv->membase; | |
| struct can_bittiming *bt = &priv->can.bittiming; | |
| u16 clk, timing; | |
| clk = bt->brp - 1; | |
| timing = ((bt->sjw - 1) << 8) | (bt->prop_seg + bt->phase_seg1 - 1) | | |
| ((bt->phase_seg2 - 1) << 4); | |
| /* | |
| * If the SAM bit is set, the input signal is oversampled three times | |
| * at the SCLK rate. | |
| */ | |
| if (priv->can.ctrlmode & CAN_CTRLMODE_3_SAMPLES) | |
| timing |= SAM; | |
| writew(clk, ®->clock); | |
| writew(timing, ®->timing); | |
| netdev_info(dev, "setting CLOCK=0x%04x TIMING=0x%04x\n", clk, timing); | |
| return 0; | |
| } | |
| static void bfin_can_set_reset_mode(struct net_device *dev) | |
| { | |
| struct bfin_can_priv *priv = netdev_priv(dev); | |
| struct bfin_can_regs __iomem *reg = priv->membase; | |
| int timeout = BFIN_CAN_TIMEOUT; | |
| int i; | |
| /* disable interrupts */ | |
| writew(0, ®->mbim1); | |
| writew(0, ®->mbim2); | |
| writew(0, ®->gim); | |
| /* reset can and enter configuration mode */ | |
| writew(SRS | CCR, ®->control); | |
| writew(CCR, ®->control); | |
| while (!(readw(®->control) & CCA)) { | |
| udelay(10); | |
| if (--timeout == 0) { | |
| netdev_err(dev, "fail to enter configuration mode\n"); | |
| BUG(); | |
| } | |
| } | |
| /* | |
| * All mailbox configurations are marked as inactive | |
| * by writing to CAN Mailbox Configuration Registers 1 and 2 | |
| * For all bits: 0 - Mailbox disabled, 1 - Mailbox enabled | |
| */ | |
| writew(0, ®->mc1); | |
| writew(0, ®->mc2); | |
| /* Set Mailbox Direction */ | |
| writew(0xFFFF, ®->md1); /* mailbox 1-16 are RX */ | |
| writew(0, ®->md2); /* mailbox 17-32 are TX */ | |
| /* RECEIVE_STD_CHL */ | |
| for (i = 0; i < 2; i++) { | |
| writew(0, ®->chl[RECEIVE_STD_CHL + i].id0); | |
| writew(AME, ®->chl[RECEIVE_STD_CHL + i].id1); | |
| writew(0, ®->chl[RECEIVE_STD_CHL + i].dlc); | |
| writew(0x1FFF, ®->msk[RECEIVE_STD_CHL + i].amh); | |
| writew(0xFFFF, ®->msk[RECEIVE_STD_CHL + i].aml); | |
| } | |
| /* RECEIVE_EXT_CHL */ | |
| for (i = 0; i < 2; i++) { | |
| writew(0, ®->chl[RECEIVE_EXT_CHL + i].id0); | |
| writew(AME | IDE, ®->chl[RECEIVE_EXT_CHL + i].id1); | |
| writew(0, ®->chl[RECEIVE_EXT_CHL + i].dlc); | |
| writew(0x1FFF, ®->msk[RECEIVE_EXT_CHL + i].amh); | |
| writew(0xFFFF, ®->msk[RECEIVE_EXT_CHL + i].aml); | |
| } | |
| writew(BIT(TRANSMIT_CHL - 16), ®->mc2); | |
| writew(BIT(RECEIVE_STD_CHL) + BIT(RECEIVE_EXT_CHL), ®->mc1); | |
| priv->can.state = CAN_STATE_STOPPED; | |
| } | |
| static void bfin_can_set_normal_mode(struct net_device *dev) | |
| { | |
| struct bfin_can_priv *priv = netdev_priv(dev); | |
| struct bfin_can_regs __iomem *reg = priv->membase; | |
| int timeout = BFIN_CAN_TIMEOUT; | |
| /* | |
| * leave configuration mode | |
| */ | |
| writew(readw(®->control) & ~CCR, ®->control); | |
| while (readw(®->status) & CCA) { | |
| udelay(10); | |
| if (--timeout == 0) { | |
| netdev_err(dev, "fail to leave configuration mode\n"); | |
| BUG(); | |
| } | |
| } | |
| /* | |
| * clear _All_ tx and rx interrupts | |
| */ | |
| writew(0xFFFF, ®->mbtif1); | |
| writew(0xFFFF, ®->mbtif2); | |
| writew(0xFFFF, ®->mbrif1); | |
| writew(0xFFFF, ®->mbrif2); | |
| /* | |
| * clear global interrupt status register | |
| */ | |
| writew(0x7FF, ®->gis); /* overwrites with '1' */ | |
| /* | |
| * Initialize Interrupts | |
| * - set bits in the mailbox interrupt mask register | |
| * - global interrupt mask | |
| */ | |
| writew(BIT(RECEIVE_STD_CHL) + BIT(RECEIVE_EXT_CHL), ®->mbim1); | |
| writew(BIT(TRANSMIT_CHL - 16), ®->mbim2); | |
| writew(EPIM | BOIM | RMLIM, ®->gim); | |
| } | |
| static void bfin_can_start(struct net_device *dev) | |
| { | |
| struct bfin_can_priv *priv = netdev_priv(dev); | |
| /* enter reset mode */ | |
| if (priv->can.state != CAN_STATE_STOPPED) | |
| bfin_can_set_reset_mode(dev); | |
| /* leave reset mode */ | |
| bfin_can_set_normal_mode(dev); | |
| } | |
| static int bfin_can_set_mode(struct net_device *dev, enum can_mode mode) | |
| { | |
| switch (mode) { | |
| case CAN_MODE_START: | |
| bfin_can_start(dev); | |
| if (netif_queue_stopped(dev)) | |
| netif_wake_queue(dev); | |
| break; | |
| default: | |
| return -EOPNOTSUPP; | |
| } | |
| return 0; | |
| } | |
| static int bfin_can_get_berr_counter(const struct net_device *dev, | |
| struct can_berr_counter *bec) | |
| { | |
| struct bfin_can_priv *priv = netdev_priv(dev); | |
| struct bfin_can_regs __iomem *reg = priv->membase; | |
| u16 cec = readw(®->cec); | |
| bec->txerr = cec >> 8; | |
| bec->rxerr = cec; | |
| return 0; | |
| } | |
| static int bfin_can_start_xmit(struct sk_buff *skb, struct net_device *dev) | |
| { | |
| struct bfin_can_priv *priv = netdev_priv(dev); | |
| struct bfin_can_regs __iomem *reg = priv->membase; | |
| struct can_frame *cf = (struct can_frame *)skb->data; | |
| u8 dlc = cf->can_dlc; | |
| canid_t id = cf->can_id; | |
| u8 *data = cf->data; | |
| u16 val; | |
| int i; | |
| if (can_dropped_invalid_skb(dev, skb)) | |
| return NETDEV_TX_OK; | |
| netif_stop_queue(dev); | |
| /* fill id */ | |
| if (id & CAN_EFF_FLAG) { | |
| writew(id, ®->chl[TRANSMIT_CHL].id0); | |
| val = ((id & 0x1FFF0000) >> 16) | IDE; | |
| } else | |
| val = (id << 2); | |
| if (id & CAN_RTR_FLAG) | |
| val |= RTR; | |
| writew(val | AME, ®->chl[TRANSMIT_CHL].id1); | |
| /* fill payload */ | |
| for (i = 0; i < 8; i += 2) { | |
| val = ((7 - i) < dlc ? (data[7 - i]) : 0) + | |
| ((6 - i) < dlc ? (data[6 - i] << 8) : 0); | |
| writew(val, ®->chl[TRANSMIT_CHL].data[i]); | |
| } | |
| /* fill data length code */ | |
| writew(dlc, ®->chl[TRANSMIT_CHL].dlc); | |
| can_put_echo_skb(skb, dev, 0); | |
| /* set transmit request */ | |
| writew(BIT(TRANSMIT_CHL - 16), ®->trs2); | |
| return 0; | |
| } | |
| static void bfin_can_rx(struct net_device *dev, u16 isrc) | |
| { | |
| struct bfin_can_priv *priv = netdev_priv(dev); | |
| struct net_device_stats *stats = &dev->stats; | |
| struct bfin_can_regs __iomem *reg = priv->membase; | |
| struct can_frame *cf; | |
| struct sk_buff *skb; | |
| int obj; | |
| int i; | |
| u16 val; | |
| skb = alloc_can_skb(dev, &cf); | |
| if (skb == NULL) | |
| return; | |
| /* get id */ | |
| if (isrc & BIT(RECEIVE_EXT_CHL)) { | |
| /* extended frame format (EFF) */ | |
| cf->can_id = ((readw(®->chl[RECEIVE_EXT_CHL].id1) | |
| & 0x1FFF) << 16) | |
| + readw(®->chl[RECEIVE_EXT_CHL].id0); | |
| cf->can_id |= CAN_EFF_FLAG; | |
| obj = RECEIVE_EXT_CHL; | |
| } else { | |
| /* standard frame format (SFF) */ | |
| cf->can_id = (readw(®->chl[RECEIVE_STD_CHL].id1) | |
| & 0x1ffc) >> 2; | |
| obj = RECEIVE_STD_CHL; | |
| } | |
| if (readw(®->chl[obj].id1) & RTR) | |
| cf->can_id |= CAN_RTR_FLAG; | |
| /* get data length code */ | |
| cf->can_dlc = get_can_dlc(readw(®->chl[obj].dlc) & 0xF); | |
| /* get payload */ | |
| for (i = 0; i < 8; i += 2) { | |
| val = readw(®->chl[obj].data[i]); | |
| cf->data[7 - i] = (7 - i) < cf->can_dlc ? val : 0; | |
| cf->data[6 - i] = (6 - i) < cf->can_dlc ? (val >> 8) : 0; | |
| } | |
| stats->rx_packets++; | |
| stats->rx_bytes += cf->can_dlc; | |
| netif_rx(skb); | |
| } | |
| static int bfin_can_err(struct net_device *dev, u16 isrc, u16 status) | |
| { | |
| struct bfin_can_priv *priv = netdev_priv(dev); | |
| struct bfin_can_regs __iomem *reg = priv->membase; | |
| struct net_device_stats *stats = &dev->stats; | |
| struct can_frame *cf; | |
| struct sk_buff *skb; | |
| enum can_state state = priv->can.state; | |
| skb = alloc_can_err_skb(dev, &cf); | |
| if (skb == NULL) | |
| return -ENOMEM; | |
| if (isrc & RMLIS) { | |
| /* data overrun interrupt */ | |
| netdev_dbg(dev, "data overrun interrupt\n"); | |
| cf->can_id |= CAN_ERR_CRTL; | |
| cf->data[1] = CAN_ERR_CRTL_RX_OVERFLOW; | |
| stats->rx_over_errors++; | |
| stats->rx_errors++; | |
| } | |
| if (isrc & BOIS) { | |
| netdev_dbg(dev, "bus-off mode interrupt\n"); | |
| state = CAN_STATE_BUS_OFF; | |
| cf->can_id |= CAN_ERR_BUSOFF; | |
| priv->can.can_stats.bus_off++; | |
| can_bus_off(dev); | |
| } | |
| if (isrc & EPIS) { | |
| /* error passive interrupt */ | |
| netdev_dbg(dev, "error passive interrupt\n"); | |
| state = CAN_STATE_ERROR_PASSIVE; | |
| } | |
| if ((isrc & EWTIS) || (isrc & EWRIS)) { | |
| netdev_dbg(dev, "Error Warning Transmit/Receive Interrupt\n"); | |
| state = CAN_STATE_ERROR_WARNING; | |
| } | |
| if (state != priv->can.state && (state == CAN_STATE_ERROR_WARNING || | |
| state == CAN_STATE_ERROR_PASSIVE)) { | |
| u16 cec = readw(®->cec); | |
| u8 rxerr = cec; | |
| u8 txerr = cec >> 8; | |
| cf->can_id |= CAN_ERR_CRTL; | |
| if (state == CAN_STATE_ERROR_WARNING) { | |
| priv->can.can_stats.error_warning++; | |
| cf->data[1] = (txerr > rxerr) ? | |
| CAN_ERR_CRTL_TX_WARNING : | |
| CAN_ERR_CRTL_RX_WARNING; | |
| } else { | |
| priv->can.can_stats.error_passive++; | |
| cf->data[1] = (txerr > rxerr) ? | |
| CAN_ERR_CRTL_TX_PASSIVE : | |
| CAN_ERR_CRTL_RX_PASSIVE; | |
| } | |
| } | |
| if (status) { | |
| priv->can.can_stats.bus_error++; | |
| cf->can_id |= CAN_ERR_PROT | CAN_ERR_BUSERROR; | |
| if (status & BEF) | |
| cf->data[2] |= CAN_ERR_PROT_BIT; | |
| else if (status & FER) | |
| cf->data[2] |= CAN_ERR_PROT_FORM; | |
| else if (status & SER) | |
| cf->data[2] |= CAN_ERR_PROT_STUFF; | |
| } | |
| priv->can.state = state; | |
| stats->rx_packets++; | |
| stats->rx_bytes += cf->can_dlc; | |
| netif_rx(skb); | |
| return 0; | |
| } | |
| static irqreturn_t bfin_can_interrupt(int irq, void *dev_id) | |
| { | |
| struct net_device *dev = dev_id; | |
| struct bfin_can_priv *priv = netdev_priv(dev); | |
| struct bfin_can_regs __iomem *reg = priv->membase; | |
| struct net_device_stats *stats = &dev->stats; | |
| u16 status, isrc; | |
| if ((irq == priv->tx_irq) && readw(®->mbtif2)) { | |
| /* transmission complete interrupt */ | |
| writew(0xFFFF, ®->mbtif2); | |
| stats->tx_packets++; | |
| stats->tx_bytes += readw(®->chl[TRANSMIT_CHL].dlc); | |
| can_get_echo_skb(dev, 0); | |
| netif_wake_queue(dev); | |
| } else if ((irq == priv->rx_irq) && readw(®->mbrif1)) { | |
| /* receive interrupt */ | |
| isrc = readw(®->mbrif1); | |
| writew(0xFFFF, ®->mbrif1); | |
| bfin_can_rx(dev, isrc); | |
| } else if ((irq == priv->err_irq) && readw(®->gis)) { | |
| /* error interrupt */ | |
| isrc = readw(®->gis); | |
| status = readw(®->esr); | |
| writew(0x7FF, ®->gis); | |
| bfin_can_err(dev, isrc, status); | |
| } else { | |
| return IRQ_NONE; | |
| } | |
| return IRQ_HANDLED; | |
| } | |
| static int bfin_can_open(struct net_device *dev) | |
| { | |
| struct bfin_can_priv *priv = netdev_priv(dev); | |
| int err; | |
| /* set chip into reset mode */ | |
| bfin_can_set_reset_mode(dev); | |
| /* common open */ | |
| err = open_candev(dev); | |
| if (err) | |
| goto exit_open; | |
| /* register interrupt handler */ | |
| err = request_irq(priv->rx_irq, &bfin_can_interrupt, 0, | |
| "bfin-can-rx", dev); | |
| if (err) | |
| goto exit_rx_irq; | |
| err = request_irq(priv->tx_irq, &bfin_can_interrupt, 0, | |
| "bfin-can-tx", dev); | |
| if (err) | |
| goto exit_tx_irq; | |
| err = request_irq(priv->err_irq, &bfin_can_interrupt, 0, | |
| "bfin-can-err", dev); | |
| if (err) | |
| goto exit_err_irq; | |
| bfin_can_start(dev); | |
| netif_start_queue(dev); | |
| return 0; | |
| exit_err_irq: | |
| free_irq(priv->tx_irq, dev); | |
| exit_tx_irq: | |
| free_irq(priv->rx_irq, dev); | |
| exit_rx_irq: | |
| close_candev(dev); | |
| exit_open: | |
| return err; | |
| } | |
| static int bfin_can_close(struct net_device *dev) | |
| { | |
| struct bfin_can_priv *priv = netdev_priv(dev); | |
| netif_stop_queue(dev); | |
| bfin_can_set_reset_mode(dev); | |
| close_candev(dev); | |
| free_irq(priv->rx_irq, dev); | |
| free_irq(priv->tx_irq, dev); | |
| free_irq(priv->err_irq, dev); | |
| return 0; | |
| } | |
| static struct net_device *alloc_bfin_candev(void) | |
| { | |
| struct net_device *dev; | |
| struct bfin_can_priv *priv; | |
| dev = alloc_candev(sizeof(*priv), TX_ECHO_SKB_MAX); | |
| if (!dev) | |
| return NULL; | |
| priv = netdev_priv(dev); | |
| priv->dev = dev; | |
| priv->can.bittiming_const = &bfin_can_bittiming_const; | |
| priv->can.do_set_bittiming = bfin_can_set_bittiming; | |
| priv->can.do_set_mode = bfin_can_set_mode; | |
| priv->can.do_get_berr_counter = bfin_can_get_berr_counter; | |
| priv->can.ctrlmode_supported = CAN_CTRLMODE_3_SAMPLES; | |
| return dev; | |
| } | |
| static const struct net_device_ops bfin_can_netdev_ops = { | |
| .ndo_open = bfin_can_open, | |
| .ndo_stop = bfin_can_close, | |
| .ndo_start_xmit = bfin_can_start_xmit, | |
| .ndo_change_mtu = can_change_mtu, | |
| }; | |
| static int bfin_can_probe(struct platform_device *pdev) | |
| { | |
| int err; | |
| struct net_device *dev; | |
| struct bfin_can_priv *priv; | |
| struct resource *res_mem, *rx_irq, *tx_irq, *err_irq; | |
| unsigned short *pdata; | |
| pdata = dev_get_platdata(&pdev->dev); | |
| if (!pdata) { | |
| dev_err(&pdev->dev, "No platform data provided!\n"); | |
| err = -EINVAL; | |
| goto exit; | |
| } | |
| res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); | |
| rx_irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0); | |
| tx_irq = platform_get_resource(pdev, IORESOURCE_IRQ, 1); | |
| err_irq = platform_get_resource(pdev, IORESOURCE_IRQ, 2); | |
| if (!res_mem || !rx_irq || !tx_irq || !err_irq) { | |
| err = -EINVAL; | |
| goto exit; | |
| } | |
| /* request peripheral pins */ | |
| err = peripheral_request_list(pdata, dev_name(&pdev->dev)); | |
| if (err) | |
| goto exit; | |
| dev = alloc_bfin_candev(); | |
| if (!dev) { | |
| err = -ENOMEM; | |
| goto exit_peri_pin_free; | |
| } | |
| priv = netdev_priv(dev); | |
| priv->membase = devm_ioremap_resource(&pdev->dev, res_mem); | |
| if (IS_ERR(priv->membase)) { | |
| err = PTR_ERR(priv->membase); | |
| goto exit_peri_pin_free; | |
| } | |
| priv->rx_irq = rx_irq->start; | |
| priv->tx_irq = tx_irq->start; | |
| priv->err_irq = err_irq->start; | |
| priv->pin_list = pdata; | |
| priv->can.clock.freq = get_sclk(); | |
| platform_set_drvdata(pdev, dev); | |
| SET_NETDEV_DEV(dev, &pdev->dev); | |
| dev->flags |= IFF_ECHO; /* we support local echo */ | |
| dev->netdev_ops = &bfin_can_netdev_ops; | |
| bfin_can_set_reset_mode(dev); | |
| err = register_candev(dev); | |
| if (err) { | |
| dev_err(&pdev->dev, "registering failed (err=%d)\n", err); | |
| goto exit_candev_free; | |
| } | |
| dev_info(&pdev->dev, | |
| "%s device registered" | |
| "(®_base=%p, rx_irq=%d, tx_irq=%d, err_irq=%d, sclk=%d)\n", | |
| DRV_NAME, priv->membase, priv->rx_irq, | |
| priv->tx_irq, priv->err_irq, priv->can.clock.freq); | |
| return 0; | |
| exit_candev_free: | |
| free_candev(dev); | |
| exit_peri_pin_free: | |
| peripheral_free_list(pdata); | |
| exit: | |
| return err; | |
| } | |
| static int bfin_can_remove(struct platform_device *pdev) | |
| { | |
| struct net_device *dev = platform_get_drvdata(pdev); | |
| struct bfin_can_priv *priv = netdev_priv(dev); | |
| bfin_can_set_reset_mode(dev); | |
| unregister_candev(dev); | |
| peripheral_free_list(priv->pin_list); | |
| free_candev(dev); | |
| return 0; | |
| } | |
| #ifdef CONFIG_PM | |
| static int bfin_can_suspend(struct platform_device *pdev, pm_message_t mesg) | |
| { | |
| struct net_device *dev = platform_get_drvdata(pdev); | |
| struct bfin_can_priv *priv = netdev_priv(dev); | |
| struct bfin_can_regs __iomem *reg = priv->membase; | |
| int timeout = BFIN_CAN_TIMEOUT; | |
| if (netif_running(dev)) { | |
| /* enter sleep mode */ | |
| writew(readw(®->control) | SMR, ®->control); | |
| while (!(readw(®->intr) & SMACK)) { | |
| udelay(10); | |
| if (--timeout == 0) { | |
| netdev_err(dev, "fail to enter sleep mode\n"); | |
| BUG(); | |
| } | |
| } | |
| } | |
| return 0; | |
| } | |
| static int bfin_can_resume(struct platform_device *pdev) | |
| { | |
| struct net_device *dev = platform_get_drvdata(pdev); | |
| struct bfin_can_priv *priv = netdev_priv(dev); | |
| struct bfin_can_regs __iomem *reg = priv->membase; | |
| if (netif_running(dev)) { | |
| /* leave sleep mode */ | |
| writew(0, ®->intr); | |
| } | |
| return 0; | |
| } | |
| #else | |
| #define bfin_can_suspend NULL | |
| #define bfin_can_resume NULL | |
| #endif /* CONFIG_PM */ | |
| static struct platform_driver bfin_can_driver = { | |
| .probe = bfin_can_probe, | |
| .remove = bfin_can_remove, | |
| .suspend = bfin_can_suspend, | |
| .resume = bfin_can_resume, | |
| .driver = { | |
| .name = DRV_NAME, | |
| }, | |
| }; | |
| module_platform_driver(bfin_can_driver); | |
| MODULE_AUTHOR("Barry Song <21cnbao@gmail.com>"); | |
| MODULE_LICENSE("GPL"); | |
| MODULE_DESCRIPTION("Blackfin on-chip CAN netdevice driver"); | |
| MODULE_ALIAS("platform:" DRV_NAME); |