| /* CAN driver for Geschwister Schneider USB/CAN devices. | |
| * | |
| * Copyright (C) 2013 Geschwister Schneider Technologie-, | |
| * Entwicklungs- und Vertriebs UG (Haftungsbeschränkt). | |
| * | |
| * Many thanks to all socketcan devs! | |
| * | |
| * This program is free software; you can redistribute it and/or modify it | |
| * under the terms of the GNU General Public License as published | |
| * by the Free Software Foundation; version 2 of the License. | |
| * | |
| * This program is distributed in the hope that it will be useful, but | |
| * WITHOUT ANY WARRANTY; without even the implied warranty of | |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU | |
| * General Public License for more details. | |
| */ | |
| #include <linux/init.h> | |
| #include <linux/signal.h> | |
| #include <linux/module.h> | |
| #include <linux/netdevice.h> | |
| #include <linux/usb.h> | |
| #include <linux/can.h> | |
| #include <linux/can/dev.h> | |
| #include <linux/can/error.h> | |
| /* Device specific constants */ | |
| #define USB_GSUSB_1_VENDOR_ID 0x1d50 | |
| #define USB_GSUSB_1_PRODUCT_ID 0x606f | |
| #define GSUSB_ENDPOINT_IN 1 | |
| #define GSUSB_ENDPOINT_OUT 2 | |
| /* Device specific constants */ | |
| enum gs_usb_breq { | |
| GS_USB_BREQ_HOST_FORMAT = 0, | |
| GS_USB_BREQ_BITTIMING, | |
| GS_USB_BREQ_MODE, | |
| GS_USB_BREQ_BERR, | |
| GS_USB_BREQ_BT_CONST, | |
| GS_USB_BREQ_DEVICE_CONFIG | |
| }; | |
| enum gs_can_mode { | |
| /* reset a channel. turns it off */ | |
| GS_CAN_MODE_RESET = 0, | |
| /* starts a channel */ | |
| GS_CAN_MODE_START | |
| }; | |
| enum gs_can_state { | |
| GS_CAN_STATE_ERROR_ACTIVE = 0, | |
| GS_CAN_STATE_ERROR_WARNING, | |
| GS_CAN_STATE_ERROR_PASSIVE, | |
| GS_CAN_STATE_BUS_OFF, | |
| GS_CAN_STATE_STOPPED, | |
| GS_CAN_STATE_SLEEPING | |
| }; | |
| /* data types passed between host and device */ | |
| struct gs_host_config { | |
| u32 byte_order; | |
| } __packed; | |
| /* All data exchanged between host and device is exchanged in host byte order, | |
| * thanks to the struct gs_host_config byte_order member, which is sent first | |
| * to indicate the desired byte order. | |
| */ | |
| struct gs_device_config { | |
| u8 reserved1; | |
| u8 reserved2; | |
| u8 reserved3; | |
| u8 icount; | |
| u32 sw_version; | |
| u32 hw_version; | |
| } __packed; | |
| #define GS_CAN_MODE_NORMAL 0 | |
| #define GS_CAN_MODE_LISTEN_ONLY (1<<0) | |
| #define GS_CAN_MODE_LOOP_BACK (1<<1) | |
| #define GS_CAN_MODE_TRIPLE_SAMPLE (1<<2) | |
| #define GS_CAN_MODE_ONE_SHOT (1<<3) | |
| struct gs_device_mode { | |
| u32 mode; | |
| u32 flags; | |
| } __packed; | |
| struct gs_device_state { | |
| u32 state; | |
| u32 rxerr; | |
| u32 txerr; | |
| } __packed; | |
| struct gs_device_bittiming { | |
| u32 prop_seg; | |
| u32 phase_seg1; | |
| u32 phase_seg2; | |
| u32 sjw; | |
| u32 brp; | |
| } __packed; | |
| #define GS_CAN_FEATURE_LISTEN_ONLY (1<<0) | |
| #define GS_CAN_FEATURE_LOOP_BACK (1<<1) | |
| #define GS_CAN_FEATURE_TRIPLE_SAMPLE (1<<2) | |
| #define GS_CAN_FEATURE_ONE_SHOT (1<<3) | |
| struct gs_device_bt_const { | |
| u32 feature; | |
| u32 fclk_can; | |
| u32 tseg1_min; | |
| u32 tseg1_max; | |
| u32 tseg2_min; | |
| u32 tseg2_max; | |
| u32 sjw_max; | |
| u32 brp_min; | |
| u32 brp_max; | |
| u32 brp_inc; | |
| } __packed; | |
| #define GS_CAN_FLAG_OVERFLOW 1 | |
| struct gs_host_frame { | |
| u32 echo_id; | |
| u32 can_id; | |
| u8 can_dlc; | |
| u8 channel; | |
| u8 flags; | |
| u8 reserved; | |
| u8 data[8]; | |
| } __packed; | |
| /* The GS USB devices make use of the same flags and masks as in | |
| * linux/can.h and linux/can/error.h, and no additional mapping is necessary. | |
| */ | |
| /* Only send a max of GS_MAX_TX_URBS frames per channel at a time. */ | |
| #define GS_MAX_TX_URBS 10 | |
| /* Only launch a max of GS_MAX_RX_URBS usb requests at a time. */ | |
| #define GS_MAX_RX_URBS 30 | |
| /* Maximum number of interfaces the driver supports per device. | |
| * Current hardware only supports 2 interfaces. The future may vary. | |
| */ | |
| #define GS_MAX_INTF 2 | |
| struct gs_tx_context { | |
| struct gs_can *dev; | |
| unsigned int echo_id; | |
| }; | |
| struct gs_can { | |
| struct can_priv can; /* must be the first member */ | |
| struct gs_usb *parent; | |
| struct net_device *netdev; | |
| struct usb_device *udev; | |
| struct usb_interface *iface; | |
| struct can_bittiming_const bt_const; | |
| unsigned int channel; /* channel number */ | |
| /* This lock prevents a race condition between xmit and receive. */ | |
| spinlock_t tx_ctx_lock; | |
| struct gs_tx_context tx_context[GS_MAX_TX_URBS]; | |
| struct usb_anchor tx_submitted; | |
| atomic_t active_tx_urbs; | |
| }; | |
| /* usb interface struct */ | |
| struct gs_usb { | |
| struct gs_can *canch[GS_MAX_INTF]; | |
| struct usb_anchor rx_submitted; | |
| atomic_t active_channels; | |
| struct usb_device *udev; | |
| }; | |
| /* 'allocate' a tx context. | |
| * returns a valid tx context or NULL if there is no space. | |
| */ | |
| static struct gs_tx_context *gs_alloc_tx_context(struct gs_can *dev) | |
| { | |
| int i = 0; | |
| unsigned long flags; | |
| spin_lock_irqsave(&dev->tx_ctx_lock, flags); | |
| for (; i < GS_MAX_TX_URBS; i++) { | |
| if (dev->tx_context[i].echo_id == GS_MAX_TX_URBS) { | |
| dev->tx_context[i].echo_id = i; | |
| spin_unlock_irqrestore(&dev->tx_ctx_lock, flags); | |
| return &dev->tx_context[i]; | |
| } | |
| } | |
| spin_unlock_irqrestore(&dev->tx_ctx_lock, flags); | |
| return NULL; | |
| } | |
| /* releases a tx context | |
| */ | |
| static void gs_free_tx_context(struct gs_tx_context *txc) | |
| { | |
| txc->echo_id = GS_MAX_TX_URBS; | |
| } | |
| /* Get a tx context by id. | |
| */ | |
| static struct gs_tx_context *gs_get_tx_context(struct gs_can *dev, unsigned int id) | |
| { | |
| unsigned long flags; | |
| if (id < GS_MAX_TX_URBS) { | |
| spin_lock_irqsave(&dev->tx_ctx_lock, flags); | |
| if (dev->tx_context[id].echo_id == id) { | |
| spin_unlock_irqrestore(&dev->tx_ctx_lock, flags); | |
| return &dev->tx_context[id]; | |
| } | |
| spin_unlock_irqrestore(&dev->tx_ctx_lock, flags); | |
| } | |
| return NULL; | |
| } | |
| static int gs_cmd_reset(struct gs_usb *gsusb, struct gs_can *gsdev) | |
| { | |
| struct gs_device_mode *dm; | |
| struct usb_interface *intf = gsdev->iface; | |
| int rc; | |
| dm = kzalloc(sizeof(*dm), GFP_KERNEL); | |
| if (!dm) | |
| return -ENOMEM; | |
| dm->mode = GS_CAN_MODE_RESET; | |
| rc = usb_control_msg(interface_to_usbdev(intf), | |
| usb_sndctrlpipe(interface_to_usbdev(intf), 0), | |
| GS_USB_BREQ_MODE, | |
| USB_DIR_OUT|USB_TYPE_VENDOR|USB_RECIP_INTERFACE, | |
| gsdev->channel, | |
| 0, | |
| dm, | |
| sizeof(*dm), | |
| 1000); | |
| return rc; | |
| } | |
| static void gs_update_state(struct gs_can *dev, struct can_frame *cf) | |
| { | |
| struct can_device_stats *can_stats = &dev->can.can_stats; | |
| if (cf->can_id & CAN_ERR_RESTARTED) { | |
| dev->can.state = CAN_STATE_ERROR_ACTIVE; | |
| can_stats->restarts++; | |
| } else if (cf->can_id & CAN_ERR_BUSOFF) { | |
| dev->can.state = CAN_STATE_BUS_OFF; | |
| can_stats->bus_off++; | |
| } else if (cf->can_id & CAN_ERR_CRTL) { | |
| if ((cf->data[1] & CAN_ERR_CRTL_TX_WARNING) || | |
| (cf->data[1] & CAN_ERR_CRTL_RX_WARNING)) { | |
| dev->can.state = CAN_STATE_ERROR_WARNING; | |
| can_stats->error_warning++; | |
| } else if ((cf->data[1] & CAN_ERR_CRTL_TX_PASSIVE) || | |
| (cf->data[1] & CAN_ERR_CRTL_RX_PASSIVE)) { | |
| dev->can.state = CAN_STATE_ERROR_PASSIVE; | |
| can_stats->error_passive++; | |
| } else { | |
| dev->can.state = CAN_STATE_ERROR_ACTIVE; | |
| } | |
| } | |
| } | |
| static void gs_usb_receive_bulk_callback(struct urb *urb) | |
| { | |
| struct gs_usb *usbcan = urb->context; | |
| struct gs_can *dev; | |
| struct net_device *netdev; | |
| int rc; | |
| struct net_device_stats *stats; | |
| struct gs_host_frame *hf = urb->transfer_buffer; | |
| struct gs_tx_context *txc; | |
| struct can_frame *cf; | |
| struct sk_buff *skb; | |
| BUG_ON(!usbcan); | |
| switch (urb->status) { | |
| case 0: /* success */ | |
| break; | |
| case -ENOENT: | |
| case -ESHUTDOWN: | |
| return; | |
| default: | |
| /* do not resubmit aborted urbs. eg: when device goes down */ | |
| return; | |
| } | |
| /* device reports out of range channel id */ | |
| if (hf->channel >= GS_MAX_INTF) | |
| goto resubmit_urb; | |
| dev = usbcan->canch[hf->channel]; | |
| netdev = dev->netdev; | |
| stats = &netdev->stats; | |
| if (!netif_device_present(netdev)) | |
| return; | |
| if (hf->echo_id == -1) { /* normal rx */ | |
| skb = alloc_can_skb(dev->netdev, &cf); | |
| if (!skb) | |
| return; | |
| cf->can_id = hf->can_id; | |
| cf->can_dlc = get_can_dlc(hf->can_dlc); | |
| memcpy(cf->data, hf->data, 8); | |
| /* ERROR frames tell us information about the controller */ | |
| if (hf->can_id & CAN_ERR_FLAG) | |
| gs_update_state(dev, cf); | |
| netdev->stats.rx_packets++; | |
| netdev->stats.rx_bytes += hf->can_dlc; | |
| netif_rx(skb); | |
| } else { /* echo_id == hf->echo_id */ | |
| if (hf->echo_id >= GS_MAX_TX_URBS) { | |
| netdev_err(netdev, | |
| "Unexpected out of range echo id %d\n", | |
| hf->echo_id); | |
| goto resubmit_urb; | |
| } | |
| netdev->stats.tx_packets++; | |
| netdev->stats.tx_bytes += hf->can_dlc; | |
| txc = gs_get_tx_context(dev, hf->echo_id); | |
| /* bad devices send bad echo_ids. */ | |
| if (!txc) { | |
| netdev_err(netdev, | |
| "Unexpected unused echo id %d\n", | |
| hf->echo_id); | |
| goto resubmit_urb; | |
| } | |
| can_get_echo_skb(netdev, hf->echo_id); | |
| gs_free_tx_context(txc); | |
| netif_wake_queue(netdev); | |
| } | |
| if (hf->flags & GS_CAN_FLAG_OVERFLOW) { | |
| skb = alloc_can_err_skb(netdev, &cf); | |
| if (!skb) | |
| goto resubmit_urb; | |
| cf->can_id |= CAN_ERR_CRTL; | |
| cf->can_dlc = CAN_ERR_DLC; | |
| cf->data[1] = CAN_ERR_CRTL_RX_OVERFLOW; | |
| stats->rx_over_errors++; | |
| stats->rx_errors++; | |
| netif_rx(skb); | |
| } | |
| resubmit_urb: | |
| usb_fill_bulk_urb(urb, | |
| usbcan->udev, | |
| usb_rcvbulkpipe(usbcan->udev, GSUSB_ENDPOINT_IN), | |
| hf, | |
| sizeof(struct gs_host_frame), | |
| gs_usb_receive_bulk_callback, | |
| usbcan | |
| ); | |
| rc = usb_submit_urb(urb, GFP_ATOMIC); | |
| /* USB failure take down all interfaces */ | |
| if (rc == -ENODEV) { | |
| for (rc = 0; rc < GS_MAX_INTF; rc++) { | |
| if (usbcan->canch[rc]) | |
| netif_device_detach(usbcan->canch[rc]->netdev); | |
| } | |
| } | |
| } | |
| static int gs_usb_set_bittiming(struct net_device *netdev) | |
| { | |
| struct gs_can *dev = netdev_priv(netdev); | |
| struct can_bittiming *bt = &dev->can.bittiming; | |
| struct usb_interface *intf = dev->iface; | |
| int rc; | |
| struct gs_device_bittiming *dbt; | |
| dbt = kmalloc(sizeof(*dbt), GFP_KERNEL); | |
| if (!dbt) | |
| return -ENOMEM; | |
| dbt->prop_seg = bt->prop_seg; | |
| dbt->phase_seg1 = bt->phase_seg1; | |
| dbt->phase_seg2 = bt->phase_seg2; | |
| dbt->sjw = bt->sjw; | |
| dbt->brp = bt->brp; | |
| /* request bit timings */ | |
| rc = usb_control_msg(interface_to_usbdev(intf), | |
| usb_sndctrlpipe(interface_to_usbdev(intf), 0), | |
| GS_USB_BREQ_BITTIMING, | |
| USB_DIR_OUT|USB_TYPE_VENDOR|USB_RECIP_INTERFACE, | |
| dev->channel, | |
| 0, | |
| dbt, | |
| sizeof(*dbt), | |
| 1000); | |
| kfree(dbt); | |
| if (rc < 0) | |
| dev_err(netdev->dev.parent, "Couldn't set bittimings (err=%d)", | |
| rc); | |
| return rc; | |
| } | |
| static void gs_usb_xmit_callback(struct urb *urb) | |
| { | |
| struct gs_tx_context *txc = urb->context; | |
| struct gs_can *dev = txc->dev; | |
| struct net_device *netdev = dev->netdev; | |
| if (urb->status) | |
| netdev_info(netdev, "usb xmit fail %d\n", txc->echo_id); | |
| usb_free_coherent(urb->dev, | |
| urb->transfer_buffer_length, | |
| urb->transfer_buffer, | |
| urb->transfer_dma); | |
| atomic_dec(&dev->active_tx_urbs); | |
| if (!netif_device_present(netdev)) | |
| return; | |
| if (netif_queue_stopped(netdev)) | |
| netif_wake_queue(netdev); | |
| } | |
| static netdev_tx_t gs_can_start_xmit(struct sk_buff *skb, struct net_device *netdev) | |
| { | |
| struct gs_can *dev = netdev_priv(netdev); | |
| struct net_device_stats *stats = &dev->netdev->stats; | |
| struct urb *urb; | |
| struct gs_host_frame *hf; | |
| struct can_frame *cf; | |
| int rc; | |
| unsigned int idx; | |
| struct gs_tx_context *txc; | |
| if (can_dropped_invalid_skb(netdev, skb)) | |
| return NETDEV_TX_OK; | |
| /* find an empty context to keep track of transmission */ | |
| txc = gs_alloc_tx_context(dev); | |
| if (!txc) | |
| return NETDEV_TX_BUSY; | |
| /* create a URB, and a buffer for it */ | |
| urb = usb_alloc_urb(0, GFP_ATOMIC); | |
| if (!urb) { | |
| netdev_err(netdev, "No memory left for URB\n"); | |
| goto nomem_urb; | |
| } | |
| hf = usb_alloc_coherent(dev->udev, sizeof(*hf), GFP_ATOMIC, | |
| &urb->transfer_dma); | |
| if (!hf) { | |
| netdev_err(netdev, "No memory left for USB buffer\n"); | |
| goto nomem_hf; | |
| } | |
| idx = txc->echo_id; | |
| if (idx >= GS_MAX_TX_URBS) { | |
| netdev_err(netdev, "Invalid tx context %d\n", idx); | |
| goto badidx; | |
| } | |
| hf->echo_id = idx; | |
| hf->channel = dev->channel; | |
| cf = (struct can_frame *)skb->data; | |
| hf->can_id = cf->can_id; | |
| hf->can_dlc = cf->can_dlc; | |
| memcpy(hf->data, cf->data, cf->can_dlc); | |
| usb_fill_bulk_urb(urb, dev->udev, | |
| usb_sndbulkpipe(dev->udev, GSUSB_ENDPOINT_OUT), | |
| hf, | |
| sizeof(*hf), | |
| gs_usb_xmit_callback, | |
| txc); | |
| urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; | |
| usb_anchor_urb(urb, &dev->tx_submitted); | |
| can_put_echo_skb(skb, netdev, idx); | |
| atomic_inc(&dev->active_tx_urbs); | |
| rc = usb_submit_urb(urb, GFP_ATOMIC); | |
| if (unlikely(rc)) { /* usb send failed */ | |
| atomic_dec(&dev->active_tx_urbs); | |
| can_free_echo_skb(netdev, idx); | |
| gs_free_tx_context(txc); | |
| usb_unanchor_urb(urb); | |
| usb_free_coherent(dev->udev, | |
| sizeof(*hf), | |
| hf, | |
| urb->transfer_dma); | |
| if (rc == -ENODEV) { | |
| netif_device_detach(netdev); | |
| } else { | |
| netdev_err(netdev, "usb_submit failed (err=%d)\n", rc); | |
| stats->tx_dropped++; | |
| } | |
| } else { | |
| /* Slow down tx path */ | |
| if (atomic_read(&dev->active_tx_urbs) >= GS_MAX_TX_URBS) | |
| netif_stop_queue(netdev); | |
| } | |
| /* let usb core take care of this urb */ | |
| usb_free_urb(urb); | |
| return NETDEV_TX_OK; | |
| badidx: | |
| usb_free_coherent(dev->udev, | |
| sizeof(*hf), | |
| hf, | |
| urb->transfer_dma); | |
| nomem_hf: | |
| usb_free_urb(urb); | |
| nomem_urb: | |
| gs_free_tx_context(txc); | |
| dev_kfree_skb(skb); | |
| stats->tx_dropped++; | |
| return NETDEV_TX_OK; | |
| } | |
| static int gs_can_open(struct net_device *netdev) | |
| { | |
| struct gs_can *dev = netdev_priv(netdev); | |
| struct gs_usb *parent = dev->parent; | |
| int rc, i; | |
| struct gs_device_mode *dm; | |
| u32 ctrlmode; | |
| rc = open_candev(netdev); | |
| if (rc) | |
| return rc; | |
| if (atomic_add_return(1, &parent->active_channels) == 1) { | |
| for (i = 0; i < GS_MAX_RX_URBS; i++) { | |
| struct urb *urb; | |
| u8 *buf; | |
| /* alloc rx urb */ | |
| urb = usb_alloc_urb(0, GFP_KERNEL); | |
| if (!urb) { | |
| netdev_err(netdev, | |
| "No memory left for URB\n"); | |
| return -ENOMEM; | |
| } | |
| /* alloc rx buffer */ | |
| buf = usb_alloc_coherent(dev->udev, | |
| sizeof(struct gs_host_frame), | |
| GFP_KERNEL, | |
| &urb->transfer_dma); | |
| if (!buf) { | |
| netdev_err(netdev, | |
| "No memory left for USB buffer\n"); | |
| usb_free_urb(urb); | |
| return -ENOMEM; | |
| } | |
| /* fill, anchor, and submit rx urb */ | |
| usb_fill_bulk_urb(urb, | |
| dev->udev, | |
| usb_rcvbulkpipe(dev->udev, | |
| GSUSB_ENDPOINT_IN), | |
| buf, | |
| sizeof(struct gs_host_frame), | |
| gs_usb_receive_bulk_callback, | |
| parent); | |
| urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; | |
| usb_anchor_urb(urb, &parent->rx_submitted); | |
| rc = usb_submit_urb(urb, GFP_KERNEL); | |
| if (rc) { | |
| if (rc == -ENODEV) | |
| netif_device_detach(dev->netdev); | |
| netdev_err(netdev, | |
| "usb_submit failed (err=%d)\n", | |
| rc); | |
| usb_unanchor_urb(urb); | |
| break; | |
| } | |
| /* Drop reference, | |
| * USB core will take care of freeing it | |
| */ | |
| usb_free_urb(urb); | |
| } | |
| } | |
| dm = kmalloc(sizeof(*dm), GFP_KERNEL); | |
| if (!dm) | |
| return -ENOMEM; | |
| /* flags */ | |
| ctrlmode = dev->can.ctrlmode; | |
| dm->flags = 0; | |
| if (ctrlmode & CAN_CTRLMODE_LOOPBACK) | |
| dm->flags |= GS_CAN_MODE_LOOP_BACK; | |
| else if (ctrlmode & CAN_CTRLMODE_LISTENONLY) | |
| dm->flags |= GS_CAN_MODE_LISTEN_ONLY; | |
| /* Controller is not allowed to retry TX | |
| * this mode is unavailable on atmels uc3c hardware | |
| */ | |
| if (ctrlmode & CAN_CTRLMODE_ONE_SHOT) | |
| dm->flags |= GS_CAN_MODE_ONE_SHOT; | |
| if (ctrlmode & CAN_CTRLMODE_3_SAMPLES) | |
| dm->flags |= GS_CAN_MODE_TRIPLE_SAMPLE; | |
| /* finally start device */ | |
| dm->mode = GS_CAN_MODE_START; | |
| rc = usb_control_msg(interface_to_usbdev(dev->iface), | |
| usb_sndctrlpipe(interface_to_usbdev(dev->iface), 0), | |
| GS_USB_BREQ_MODE, | |
| USB_DIR_OUT|USB_TYPE_VENDOR|USB_RECIP_INTERFACE, | |
| dev->channel, | |
| 0, | |
| dm, | |
| sizeof(*dm), | |
| 1000); | |
| if (rc < 0) { | |
| netdev_err(netdev, "Couldn't start device (err=%d)\n", rc); | |
| kfree(dm); | |
| return rc; | |
| } | |
| kfree(dm); | |
| dev->can.state = CAN_STATE_ERROR_ACTIVE; | |
| if (!(dev->can.ctrlmode & CAN_CTRLMODE_LISTENONLY)) | |
| netif_start_queue(netdev); | |
| return 0; | |
| } | |
| static int gs_can_close(struct net_device *netdev) | |
| { | |
| int rc; | |
| struct gs_can *dev = netdev_priv(netdev); | |
| struct gs_usb *parent = dev->parent; | |
| netif_stop_queue(netdev); | |
| /* Stop polling */ | |
| if (atomic_dec_and_test(&parent->active_channels)) | |
| usb_kill_anchored_urbs(&parent->rx_submitted); | |
| /* Stop sending URBs */ | |
| usb_kill_anchored_urbs(&dev->tx_submitted); | |
| atomic_set(&dev->active_tx_urbs, 0); | |
| /* reset the device */ | |
| rc = gs_cmd_reset(parent, dev); | |
| if (rc < 0) | |
| netdev_warn(netdev, "Couldn't shutdown device (err=%d)", rc); | |
| /* reset tx contexts */ | |
| for (rc = 0; rc < GS_MAX_TX_URBS; rc++) { | |
| dev->tx_context[rc].dev = dev; | |
| dev->tx_context[rc].echo_id = GS_MAX_TX_URBS; | |
| } | |
| /* close the netdev */ | |
| close_candev(netdev); | |
| return 0; | |
| } | |
| static const struct net_device_ops gs_usb_netdev_ops = { | |
| .ndo_open = gs_can_open, | |
| .ndo_stop = gs_can_close, | |
| .ndo_start_xmit = gs_can_start_xmit, | |
| .ndo_change_mtu = can_change_mtu, | |
| }; | |
| static struct gs_can *gs_make_candev(unsigned int channel, struct usb_interface *intf) | |
| { | |
| struct gs_can *dev; | |
| struct net_device *netdev; | |
| int rc; | |
| struct gs_device_bt_const *bt_const; | |
| bt_const = kmalloc(sizeof(*bt_const), GFP_KERNEL); | |
| if (!bt_const) | |
| return ERR_PTR(-ENOMEM); | |
| /* fetch bit timing constants */ | |
| rc = usb_control_msg(interface_to_usbdev(intf), | |
| usb_rcvctrlpipe(interface_to_usbdev(intf), 0), | |
| GS_USB_BREQ_BT_CONST, | |
| USB_DIR_IN|USB_TYPE_VENDOR|USB_RECIP_INTERFACE, | |
| channel, | |
| 0, | |
| bt_const, | |
| sizeof(*bt_const), | |
| 1000); | |
| if (rc < 0) { | |
| dev_err(&intf->dev, | |
| "Couldn't get bit timing const for channel (err=%d)\n", | |
| rc); | |
| kfree(bt_const); | |
| return ERR_PTR(rc); | |
| } | |
| /* create netdev */ | |
| netdev = alloc_candev(sizeof(struct gs_can), GS_MAX_TX_URBS); | |
| if (!netdev) { | |
| dev_err(&intf->dev, "Couldn't allocate candev\n"); | |
| kfree(bt_const); | |
| return ERR_PTR(-ENOMEM); | |
| } | |
| dev = netdev_priv(netdev); | |
| netdev->netdev_ops = &gs_usb_netdev_ops; | |
| netdev->flags |= IFF_ECHO; /* we support full roundtrip echo */ | |
| /* dev settup */ | |
| strcpy(dev->bt_const.name, "gs_usb"); | |
| dev->bt_const.tseg1_min = bt_const->tseg1_min; | |
| dev->bt_const.tseg1_max = bt_const->tseg1_max; | |
| dev->bt_const.tseg2_min = bt_const->tseg2_min; | |
| dev->bt_const.tseg2_max = bt_const->tseg2_max; | |
| dev->bt_const.sjw_max = bt_const->sjw_max; | |
| dev->bt_const.brp_min = bt_const->brp_min; | |
| dev->bt_const.brp_max = bt_const->brp_max; | |
| dev->bt_const.brp_inc = bt_const->brp_inc; | |
| dev->udev = interface_to_usbdev(intf); | |
| dev->iface = intf; | |
| dev->netdev = netdev; | |
| dev->channel = channel; | |
| init_usb_anchor(&dev->tx_submitted); | |
| atomic_set(&dev->active_tx_urbs, 0); | |
| spin_lock_init(&dev->tx_ctx_lock); | |
| for (rc = 0; rc < GS_MAX_TX_URBS; rc++) { | |
| dev->tx_context[rc].dev = dev; | |
| dev->tx_context[rc].echo_id = GS_MAX_TX_URBS; | |
| } | |
| /* can settup */ | |
| dev->can.state = CAN_STATE_STOPPED; | |
| dev->can.clock.freq = bt_const->fclk_can; | |
| dev->can.bittiming_const = &dev->bt_const; | |
| dev->can.do_set_bittiming = gs_usb_set_bittiming; | |
| dev->can.ctrlmode_supported = 0; | |
| if (bt_const->feature & GS_CAN_FEATURE_LISTEN_ONLY) | |
| dev->can.ctrlmode_supported |= CAN_CTRLMODE_LISTENONLY; | |
| if (bt_const->feature & GS_CAN_FEATURE_LOOP_BACK) | |
| dev->can.ctrlmode_supported |= CAN_CTRLMODE_LOOPBACK; | |
| if (bt_const->feature & GS_CAN_FEATURE_TRIPLE_SAMPLE) | |
| dev->can.ctrlmode_supported |= CAN_CTRLMODE_3_SAMPLES; | |
| if (bt_const->feature & GS_CAN_FEATURE_ONE_SHOT) | |
| dev->can.ctrlmode_supported |= CAN_CTRLMODE_ONE_SHOT; | |
| kfree(bt_const); | |
| SET_NETDEV_DEV(netdev, &intf->dev); | |
| rc = register_candev(dev->netdev); | |
| if (rc) { | |
| free_candev(dev->netdev); | |
| dev_err(&intf->dev, "Couldn't register candev (err=%d)\n", rc); | |
| return ERR_PTR(rc); | |
| } | |
| return dev; | |
| } | |
| static void gs_destroy_candev(struct gs_can *dev) | |
| { | |
| unregister_candev(dev->netdev); | |
| free_candev(dev->netdev); | |
| usb_kill_anchored_urbs(&dev->tx_submitted); | |
| kfree(dev); | |
| } | |
| static int gs_usb_probe(struct usb_interface *intf, const struct usb_device_id *id) | |
| { | |
| struct gs_usb *dev; | |
| int rc = -ENOMEM; | |
| unsigned int icount, i; | |
| struct gs_host_config *hconf; | |
| struct gs_device_config *dconf; | |
| hconf = kmalloc(sizeof(*hconf), GFP_KERNEL); | |
| if (!hconf) | |
| return -ENOMEM; | |
| hconf->byte_order = 0x0000beef; | |
| /* send host config */ | |
| rc = usb_control_msg(interface_to_usbdev(intf), | |
| usb_sndctrlpipe(interface_to_usbdev(intf), 0), | |
| GS_USB_BREQ_HOST_FORMAT, | |
| USB_DIR_OUT|USB_TYPE_VENDOR|USB_RECIP_INTERFACE, | |
| 1, | |
| intf->altsetting[0].desc.bInterfaceNumber, | |
| hconf, | |
| sizeof(*hconf), | |
| 1000); | |
| kfree(hconf); | |
| if (rc < 0) { | |
| dev_err(&intf->dev, "Couldn't send data format (err=%d)\n", | |
| rc); | |
| return rc; | |
| } | |
| dconf = kmalloc(sizeof(*dconf), GFP_KERNEL); | |
| if (!dconf) | |
| return -ENOMEM; | |
| /* read device config */ | |
| rc = usb_control_msg(interface_to_usbdev(intf), | |
| usb_rcvctrlpipe(interface_to_usbdev(intf), 0), | |
| GS_USB_BREQ_DEVICE_CONFIG, | |
| USB_DIR_IN|USB_TYPE_VENDOR|USB_RECIP_INTERFACE, | |
| 1, | |
| intf->altsetting[0].desc.bInterfaceNumber, | |
| dconf, | |
| sizeof(*dconf), | |
| 1000); | |
| if (rc < 0) { | |
| dev_err(&intf->dev, "Couldn't get device config: (err=%d)\n", | |
| rc); | |
| kfree(dconf); | |
| return rc; | |
| } | |
| icount = dconf->icount+1; | |
| kfree(dconf); | |
| dev_info(&intf->dev, "Configuring for %d interfaces\n", icount); | |
| if (icount > GS_MAX_INTF) { | |
| dev_err(&intf->dev, | |
| "Driver cannot handle more that %d CAN interfaces\n", | |
| GS_MAX_INTF); | |
| return -EINVAL; | |
| } | |
| dev = kzalloc(sizeof(*dev), GFP_KERNEL); | |
| if (!dev) | |
| return -ENOMEM; | |
| init_usb_anchor(&dev->rx_submitted); | |
| atomic_set(&dev->active_channels, 0); | |
| usb_set_intfdata(intf, dev); | |
| dev->udev = interface_to_usbdev(intf); | |
| for (i = 0; i < icount; i++) { | |
| dev->canch[i] = gs_make_candev(i, intf); | |
| if (IS_ERR_OR_NULL(dev->canch[i])) { | |
| /* on failure destroy previously created candevs */ | |
| icount = i; | |
| for (i = 0; i < icount; i++) { | |
| gs_destroy_candev(dev->canch[i]); | |
| dev->canch[i] = NULL; | |
| } | |
| kfree(dev); | |
| return rc; | |
| } | |
| dev->canch[i]->parent = dev; | |
| } | |
| return 0; | |
| } | |
| static void gs_usb_disconnect(struct usb_interface *intf) | |
| { | |
| unsigned i; | |
| struct gs_usb *dev = usb_get_intfdata(intf); | |
| usb_set_intfdata(intf, NULL); | |
| if (!dev) { | |
| dev_err(&intf->dev, "Disconnect (nodata)\n"); | |
| return; | |
| } | |
| for (i = 0; i < GS_MAX_INTF; i++) { | |
| struct gs_can *can = dev->canch[i]; | |
| if (!can) | |
| continue; | |
| gs_destroy_candev(can); | |
| } | |
| usb_kill_anchored_urbs(&dev->rx_submitted); | |
| } | |
| static const struct usb_device_id gs_usb_table[] = { | |
| {USB_DEVICE(USB_GSUSB_1_VENDOR_ID, USB_GSUSB_1_PRODUCT_ID)}, | |
| {} /* Terminating entry */ | |
| }; | |
| MODULE_DEVICE_TABLE(usb, gs_usb_table); | |
| static struct usb_driver gs_usb_driver = { | |
| .name = "gs_usb", | |
| .probe = gs_usb_probe, | |
| .disconnect = gs_usb_disconnect, | |
| .id_table = gs_usb_table, | |
| }; | |
| module_usb_driver(gs_usb_driver); | |
| MODULE_AUTHOR("Maximilian Schneider <mws@schneidersoft.net>"); | |
| MODULE_DESCRIPTION( | |
| "Socket CAN device driver for Geschwister Schneider Technologie-, " | |
| "Entwicklungs- und Vertriebs UG. USB2.0 to CAN interfaces."); | |
| MODULE_LICENSE("GPL v2"); |