| /* | |
| * net/dsa/mv88e6131.c - Marvell 88e6095/6095f/6131 switch chip support | |
| * Copyright (c) 2008-2009 Marvell Semiconductor | |
| * | |
| * This program is free software; you can redistribute it and/or modify | |
| * it under the terms of the GNU General Public License as published by | |
| * the Free Software Foundation; either version 2 of the License, or | |
| * (at your option) any later version. | |
| */ | |
| #include <linux/delay.h> | |
| #include <linux/jiffies.h> | |
| #include <linux/list.h> | |
| #include <linux/module.h> | |
| #include <linux/netdevice.h> | |
| #include <linux/phy.h> | |
| #include <net/dsa.h> | |
| #include "mv88e6xxx.h" | |
| static const struct mv88e6xxx_switch_id mv88e6131_table[] = { | |
| { PORT_SWITCH_ID_6085, "Marvell 88E6085" }, | |
| { PORT_SWITCH_ID_6095, "Marvell 88E6095/88E6095F" }, | |
| { PORT_SWITCH_ID_6131, "Marvell 88E6131" }, | |
| { PORT_SWITCH_ID_6131_B2, "Marvell 88E6131 (B2)" }, | |
| { PORT_SWITCH_ID_6185, "Marvell 88E6185" }, | |
| }; | |
| static char *mv88e6131_probe(struct device *host_dev, int sw_addr) | |
| { | |
| return mv88e6xxx_lookup_name(host_dev, sw_addr, mv88e6131_table, | |
| ARRAY_SIZE(mv88e6131_table)); | |
| } | |
| static int mv88e6131_setup_global(struct dsa_switch *ds) | |
| { | |
| u32 upstream_port = dsa_upstream_port(ds); | |
| int ret; | |
| u32 reg; | |
| ret = mv88e6xxx_setup_global(ds); | |
| if (ret) | |
| return ret; | |
| /* Enable the PHY polling unit, don't discard packets with | |
| * excessive collisions, use a weighted fair queueing scheme | |
| * to arbitrate between packet queues, set the maximum frame | |
| * size to 1632, and mask all interrupt sources. | |
| */ | |
| REG_WRITE(REG_GLOBAL, GLOBAL_CONTROL, | |
| GLOBAL_CONTROL_PPU_ENABLE | GLOBAL_CONTROL_MAX_FRAME_1632); | |
| /* Set the VLAN ethertype to 0x8100. */ | |
| REG_WRITE(REG_GLOBAL, GLOBAL_CORE_TAG_TYPE, 0x8100); | |
| /* Disable ARP mirroring, and configure the upstream port as | |
| * the port to which ingress and egress monitor frames are to | |
| * be sent. | |
| */ | |
| reg = upstream_port << GLOBAL_MONITOR_CONTROL_INGRESS_SHIFT | | |
| upstream_port << GLOBAL_MONITOR_CONTROL_EGRESS_SHIFT | | |
| GLOBAL_MONITOR_CONTROL_ARP_DISABLED; | |
| REG_WRITE(REG_GLOBAL, GLOBAL_MONITOR_CONTROL, reg); | |
| /* Disable cascade port functionality unless this device | |
| * is used in a cascade configuration, and set the switch's | |
| * DSA device number. | |
| */ | |
| if (ds->dst->pd->nr_chips > 1) | |
| REG_WRITE(REG_GLOBAL, GLOBAL_CONTROL_2, | |
| GLOBAL_CONTROL_2_MULTIPLE_CASCADE | | |
| (ds->index & 0x1f)); | |
| else | |
| REG_WRITE(REG_GLOBAL, GLOBAL_CONTROL_2, | |
| GLOBAL_CONTROL_2_NO_CASCADE | | |
| (ds->index & 0x1f)); | |
| /* Force the priority of IGMP/MLD snoop frames and ARP frames | |
| * to the highest setting. | |
| */ | |
| REG_WRITE(REG_GLOBAL2, GLOBAL2_PRIO_OVERRIDE, | |
| GLOBAL2_PRIO_OVERRIDE_FORCE_SNOOP | | |
| 7 << GLOBAL2_PRIO_OVERRIDE_SNOOP_SHIFT | | |
| GLOBAL2_PRIO_OVERRIDE_FORCE_ARP | | |
| 7 << GLOBAL2_PRIO_OVERRIDE_ARP_SHIFT); | |
| return 0; | |
| } | |
| static int mv88e6131_setup(struct dsa_switch *ds) | |
| { | |
| struct mv88e6xxx_priv_state *ps = ds_to_priv(ds); | |
| int ret; | |
| ret = mv88e6xxx_setup_common(ds); | |
| if (ret < 0) | |
| return ret; | |
| mv88e6xxx_ppu_state_init(ds); | |
| switch (ps->id) { | |
| case PORT_SWITCH_ID_6085: | |
| case PORT_SWITCH_ID_6185: | |
| ps->num_ports = 10; | |
| break; | |
| case PORT_SWITCH_ID_6095: | |
| ps->num_ports = 11; | |
| break; | |
| case PORT_SWITCH_ID_6131: | |
| case PORT_SWITCH_ID_6131_B2: | |
| ps->num_ports = 8; | |
| break; | |
| default: | |
| return -ENODEV; | |
| } | |
| ret = mv88e6xxx_switch_reset(ds, false); | |
| if (ret < 0) | |
| return ret; | |
| ret = mv88e6131_setup_global(ds); | |
| if (ret < 0) | |
| return ret; | |
| return mv88e6xxx_setup_ports(ds); | |
| } | |
| static int mv88e6131_port_to_phy_addr(struct dsa_switch *ds, int port) | |
| { | |
| struct mv88e6xxx_priv_state *ps = ds_to_priv(ds); | |
| if (port >= 0 && port < ps->num_ports) | |
| return port; | |
| return -EINVAL; | |
| } | |
| static int | |
| mv88e6131_phy_read(struct dsa_switch *ds, int port, int regnum) | |
| { | |
| int addr = mv88e6131_port_to_phy_addr(ds, port); | |
| if (addr < 0) | |
| return addr; | |
| return mv88e6xxx_phy_read_ppu(ds, addr, regnum); | |
| } | |
| static int | |
| mv88e6131_phy_write(struct dsa_switch *ds, | |
| int port, int regnum, u16 val) | |
| { | |
| int addr = mv88e6131_port_to_phy_addr(ds, port); | |
| if (addr < 0) | |
| return addr; | |
| return mv88e6xxx_phy_write_ppu(ds, addr, regnum, val); | |
| } | |
| struct dsa_switch_driver mv88e6131_switch_driver = { | |
| .tag_protocol = DSA_TAG_PROTO_DSA, | |
| .priv_size = sizeof(struct mv88e6xxx_priv_state), | |
| .probe = mv88e6131_probe, | |
| .setup = mv88e6131_setup, | |
| .set_addr = mv88e6xxx_set_addr_direct, | |
| .phy_read = mv88e6131_phy_read, | |
| .phy_write = mv88e6131_phy_write, | |
| .get_strings = mv88e6xxx_get_strings, | |
| .get_ethtool_stats = mv88e6xxx_get_ethtool_stats, | |
| .get_sset_count = mv88e6xxx_get_sset_count, | |
| .adjust_link = mv88e6xxx_adjust_link, | |
| }; | |
| MODULE_ALIAS("platform:mv88e6085"); | |
| MODULE_ALIAS("platform:mv88e6095"); | |
| MODULE_ALIAS("platform:mv88e6095f"); | |
| MODULE_ALIAS("platform:mv88e6131"); |