| /* | |
| * Network device driver for the MACE ethernet controller on | |
| * Apple Powermacs. Assumes it's under a DBDMA controller. | |
| * | |
| * Copyright (C) 1996 Paul Mackerras. | |
| */ | |
| #include <linux/module.h> | |
| #include <linux/kernel.h> | |
| #include <linux/netdevice.h> | |
| #include <linux/etherdevice.h> | |
| #include <linux/delay.h> | |
| #include <linux/string.h> | |
| #include <linux/timer.h> | |
| #include <linux/init.h> | |
| #include <linux/interrupt.h> | |
| #include <linux/crc32.h> | |
| #include <linux/spinlock.h> | |
| #include <linux/bitrev.h> | |
| #include <linux/slab.h> | |
| #include <asm/prom.h> | |
| #include <asm/dbdma.h> | |
| #include <asm/io.h> | |
| #include <asm/pgtable.h> | |
| #include <asm/macio.h> | |
| #include "mace.h" | |
| static int port_aaui = -1; | |
| #define N_RX_RING 8 | |
| #define N_TX_RING 6 | |
| #define MAX_TX_ACTIVE 1 | |
| #define NCMDS_TX 1 /* dma commands per element in tx ring */ | |
| #define RX_BUFLEN (ETH_FRAME_LEN + 8) | |
| #define TX_TIMEOUT HZ /* 1 second */ | |
| /* Chip rev needs workaround on HW & multicast addr change */ | |
| #define BROKEN_ADDRCHG_REV 0x0941 | |
| /* Bits in transmit DMA status */ | |
| #define TX_DMA_ERR 0x80 | |
| struct mace_data { | |
| volatile struct mace __iomem *mace; | |
| volatile struct dbdma_regs __iomem *tx_dma; | |
| int tx_dma_intr; | |
| volatile struct dbdma_regs __iomem *rx_dma; | |
| int rx_dma_intr; | |
| volatile struct dbdma_cmd *tx_cmds; /* xmit dma command list */ | |
| volatile struct dbdma_cmd *rx_cmds; /* recv dma command list */ | |
| struct sk_buff *rx_bufs[N_RX_RING]; | |
| int rx_fill; | |
| int rx_empty; | |
| struct sk_buff *tx_bufs[N_TX_RING]; | |
| int tx_fill; | |
| int tx_empty; | |
| unsigned char maccc; | |
| unsigned char tx_fullup; | |
| unsigned char tx_active; | |
| unsigned char tx_bad_runt; | |
| struct timer_list tx_timeout; | |
| int timeout_active; | |
| int port_aaui; | |
| int chipid; | |
| struct macio_dev *mdev; | |
| spinlock_t lock; | |
| }; | |
| /* | |
| * Number of bytes of private data per MACE: allow enough for | |
| * the rx and tx dma commands plus a branch dma command each, | |
| * and another 16 bytes to allow us to align the dma command | |
| * buffers on a 16 byte boundary. | |
| */ | |
| #define PRIV_BYTES (sizeof(struct mace_data) \ | |
| + (N_RX_RING + NCMDS_TX * N_TX_RING + 3) * sizeof(struct dbdma_cmd)) | |
| static int mace_open(struct net_device *dev); | |
| static int mace_close(struct net_device *dev); | |
| static int mace_xmit_start(struct sk_buff *skb, struct net_device *dev); | |
| static void mace_set_multicast(struct net_device *dev); | |
| static void mace_reset(struct net_device *dev); | |
| static int mace_set_address(struct net_device *dev, void *addr); | |
| static irqreturn_t mace_interrupt(int irq, void *dev_id); | |
| static irqreturn_t mace_txdma_intr(int irq, void *dev_id); | |
| static irqreturn_t mace_rxdma_intr(int irq, void *dev_id); | |
| static void mace_set_timeout(struct net_device *dev); | |
| static void mace_tx_timeout(unsigned long data); | |
| static inline void dbdma_reset(volatile struct dbdma_regs __iomem *dma); | |
| static inline void mace_clean_rings(struct mace_data *mp); | |
| static void __mace_set_address(struct net_device *dev, void *addr); | |
| /* | |
| * If we can't get a skbuff when we need it, we use this area for DMA. | |
| */ | |
| static unsigned char *dummy_buf; | |
| static const struct net_device_ops mace_netdev_ops = { | |
| .ndo_open = mace_open, | |
| .ndo_stop = mace_close, | |
| .ndo_start_xmit = mace_xmit_start, | |
| .ndo_set_rx_mode = mace_set_multicast, | |
| .ndo_set_mac_address = mace_set_address, | |
| .ndo_change_mtu = eth_change_mtu, | |
| .ndo_validate_addr = eth_validate_addr, | |
| }; | |
| static int mace_probe(struct macio_dev *mdev, const struct of_device_id *match) | |
| { | |
| struct device_node *mace = macio_get_of_node(mdev); | |
| struct net_device *dev; | |
| struct mace_data *mp; | |
| const unsigned char *addr; | |
| int j, rev, rc = -EBUSY; | |
| if (macio_resource_count(mdev) != 3 || macio_irq_count(mdev) != 3) { | |
| printk(KERN_ERR "can't use MACE %s: need 3 addrs and 3 irqs\n", | |
| mace->full_name); | |
| return -ENODEV; | |
| } | |
| addr = of_get_property(mace, "mac-address", NULL); | |
| if (addr == NULL) { | |
| addr = of_get_property(mace, "local-mac-address", NULL); | |
| if (addr == NULL) { | |
| printk(KERN_ERR "Can't get mac-address for MACE %s\n", | |
| mace->full_name); | |
| return -ENODEV; | |
| } | |
| } | |
| /* | |
| * lazy allocate the driver-wide dummy buffer. (Note that we | |
| * never have more than one MACE in the system anyway) | |
| */ | |
| if (dummy_buf == NULL) { | |
| dummy_buf = kmalloc(RX_BUFLEN+2, GFP_KERNEL); | |
| if (dummy_buf == NULL) | |
| return -ENOMEM; | |
| } | |
| if (macio_request_resources(mdev, "mace")) { | |
| printk(KERN_ERR "MACE: can't request IO resources !\n"); | |
| return -EBUSY; | |
| } | |
| dev = alloc_etherdev(PRIV_BYTES); | |
| if (!dev) { | |
| rc = -ENOMEM; | |
| goto err_release; | |
| } | |
| SET_NETDEV_DEV(dev, &mdev->ofdev.dev); | |
| mp = netdev_priv(dev); | |
| mp->mdev = mdev; | |
| macio_set_drvdata(mdev, dev); | |
| dev->base_addr = macio_resource_start(mdev, 0); | |
| mp->mace = ioremap(dev->base_addr, 0x1000); | |
| if (mp->mace == NULL) { | |
| printk(KERN_ERR "MACE: can't map IO resources !\n"); | |
| rc = -ENOMEM; | |
| goto err_free; | |
| } | |
| dev->irq = macio_irq(mdev, 0); | |
| rev = addr[0] == 0 && addr[1] == 0xA0; | |
| for (j = 0; j < 6; ++j) { | |
| dev->dev_addr[j] = rev ? bitrev8(addr[j]): addr[j]; | |
| } | |
| mp->chipid = (in_8(&mp->mace->chipid_hi) << 8) | | |
| in_8(&mp->mace->chipid_lo); | |
| mp = netdev_priv(dev); | |
| mp->maccc = ENXMT | ENRCV; | |
| mp->tx_dma = ioremap(macio_resource_start(mdev, 1), 0x1000); | |
| if (mp->tx_dma == NULL) { | |
| printk(KERN_ERR "MACE: can't map TX DMA resources !\n"); | |
| rc = -ENOMEM; | |
| goto err_unmap_io; | |
| } | |
| mp->tx_dma_intr = macio_irq(mdev, 1); | |
| mp->rx_dma = ioremap(macio_resource_start(mdev, 2), 0x1000); | |
| if (mp->rx_dma == NULL) { | |
| printk(KERN_ERR "MACE: can't map RX DMA resources !\n"); | |
| rc = -ENOMEM; | |
| goto err_unmap_tx_dma; | |
| } | |
| mp->rx_dma_intr = macio_irq(mdev, 2); | |
| mp->tx_cmds = (volatile struct dbdma_cmd *) DBDMA_ALIGN(mp + 1); | |
| mp->rx_cmds = mp->tx_cmds + NCMDS_TX * N_TX_RING + 1; | |
| memset((char *) mp->tx_cmds, 0, | |
| (NCMDS_TX*N_TX_RING + N_RX_RING + 2) * sizeof(struct dbdma_cmd)); | |
| init_timer(&mp->tx_timeout); | |
| spin_lock_init(&mp->lock); | |
| mp->timeout_active = 0; | |
| if (port_aaui >= 0) | |
| mp->port_aaui = port_aaui; | |
| else { | |
| /* Apple Network Server uses the AAUI port */ | |
| if (of_machine_is_compatible("AAPL,ShinerESB")) | |
| mp->port_aaui = 1; | |
| else { | |
| #ifdef CONFIG_MACE_AAUI_PORT | |
| mp->port_aaui = 1; | |
| #else | |
| mp->port_aaui = 0; | |
| #endif | |
| } | |
| } | |
| dev->netdev_ops = &mace_netdev_ops; | |
| /* | |
| * Most of what is below could be moved to mace_open() | |
| */ | |
| mace_reset(dev); | |
| rc = request_irq(dev->irq, mace_interrupt, 0, "MACE", dev); | |
| if (rc) { | |
| printk(KERN_ERR "MACE: can't get irq %d\n", dev->irq); | |
| goto err_unmap_rx_dma; | |
| } | |
| rc = request_irq(mp->tx_dma_intr, mace_txdma_intr, 0, "MACE-txdma", dev); | |
| if (rc) { | |
| printk(KERN_ERR "MACE: can't get irq %d\n", mp->tx_dma_intr); | |
| goto err_free_irq; | |
| } | |
| rc = request_irq(mp->rx_dma_intr, mace_rxdma_intr, 0, "MACE-rxdma", dev); | |
| if (rc) { | |
| printk(KERN_ERR "MACE: can't get irq %d\n", mp->rx_dma_intr); | |
| goto err_free_tx_irq; | |
| } | |
| rc = register_netdev(dev); | |
| if (rc) { | |
| printk(KERN_ERR "MACE: Cannot register net device, aborting.\n"); | |
| goto err_free_rx_irq; | |
| } | |
| printk(KERN_INFO "%s: MACE at %pM, chip revision %d.%d\n", | |
| dev->name, dev->dev_addr, | |
| mp->chipid >> 8, mp->chipid & 0xff); | |
| return 0; | |
| err_free_rx_irq: | |
| free_irq(macio_irq(mdev, 2), dev); | |
| err_free_tx_irq: | |
| free_irq(macio_irq(mdev, 1), dev); | |
| err_free_irq: | |
| free_irq(macio_irq(mdev, 0), dev); | |
| err_unmap_rx_dma: | |
| iounmap(mp->rx_dma); | |
| err_unmap_tx_dma: | |
| iounmap(mp->tx_dma); | |
| err_unmap_io: | |
| iounmap(mp->mace); | |
| err_free: | |
| free_netdev(dev); | |
| err_release: | |
| macio_release_resources(mdev); | |
| return rc; | |
| } | |
| static int mace_remove(struct macio_dev *mdev) | |
| { | |
| struct net_device *dev = macio_get_drvdata(mdev); | |
| struct mace_data *mp; | |
| BUG_ON(dev == NULL); | |
| macio_set_drvdata(mdev, NULL); | |
| mp = netdev_priv(dev); | |
| unregister_netdev(dev); | |
| free_irq(dev->irq, dev); | |
| free_irq(mp->tx_dma_intr, dev); | |
| free_irq(mp->rx_dma_intr, dev); | |
| iounmap(mp->rx_dma); | |
| iounmap(mp->tx_dma); | |
| iounmap(mp->mace); | |
| free_netdev(dev); | |
| macio_release_resources(mdev); | |
| return 0; | |
| } | |
| static void dbdma_reset(volatile struct dbdma_regs __iomem *dma) | |
| { | |
| int i; | |
| out_le32(&dma->control, (WAKE|FLUSH|PAUSE|RUN) << 16); | |
| /* | |
| * Yes this looks peculiar, but apparently it needs to be this | |
| * way on some machines. | |
| */ | |
| for (i = 200; i > 0; --i) | |
| if (le32_to_cpu(dma->control) & RUN) | |
| udelay(1); | |
| } | |
| static void mace_reset(struct net_device *dev) | |
| { | |
| struct mace_data *mp = netdev_priv(dev); | |
| volatile struct mace __iomem *mb = mp->mace; | |
| int i; | |
| /* soft-reset the chip */ | |
| i = 200; | |
| while (--i) { | |
| out_8(&mb->biucc, SWRST); | |
| if (in_8(&mb->biucc) & SWRST) { | |
| udelay(10); | |
| continue; | |
| } | |
| break; | |
| } | |
| if (!i) { | |
| printk(KERN_ERR "mace: cannot reset chip!\n"); | |
| return; | |
| } | |
| out_8(&mb->imr, 0xff); /* disable all intrs for now */ | |
| i = in_8(&mb->ir); | |
| out_8(&mb->maccc, 0); /* turn off tx, rx */ | |
| out_8(&mb->biucc, XMTSP_64); | |
| out_8(&mb->utr, RTRD); | |
| out_8(&mb->fifocc, RCVFW_32 | XMTFW_16 | XMTFWU | RCVFWU | XMTBRST); | |
| out_8(&mb->xmtfc, AUTO_PAD_XMIT); /* auto-pad short frames */ | |
| out_8(&mb->rcvfc, 0); | |
| /* load up the hardware address */ | |
| __mace_set_address(dev, dev->dev_addr); | |
| /* clear the multicast filter */ | |
| if (mp->chipid == BROKEN_ADDRCHG_REV) | |
| out_8(&mb->iac, LOGADDR); | |
| else { | |
| out_8(&mb->iac, ADDRCHG | LOGADDR); | |
| while ((in_8(&mb->iac) & ADDRCHG) != 0) | |
| ; | |
| } | |
| for (i = 0; i < 8; ++i) | |
| out_8(&mb->ladrf, 0); | |
| /* done changing address */ | |
| if (mp->chipid != BROKEN_ADDRCHG_REV) | |
| out_8(&mb->iac, 0); | |
| if (mp->port_aaui) | |
| out_8(&mb->plscc, PORTSEL_AUI + ENPLSIO); | |
| else | |
| out_8(&mb->plscc, PORTSEL_GPSI + ENPLSIO); | |
| } | |
| static void __mace_set_address(struct net_device *dev, void *addr) | |
| { | |
| struct mace_data *mp = netdev_priv(dev); | |
| volatile struct mace __iomem *mb = mp->mace; | |
| unsigned char *p = addr; | |
| int i; | |
| /* load up the hardware address */ | |
| if (mp->chipid == BROKEN_ADDRCHG_REV) | |
| out_8(&mb->iac, PHYADDR); | |
| else { | |
| out_8(&mb->iac, ADDRCHG | PHYADDR); | |
| while ((in_8(&mb->iac) & ADDRCHG) != 0) | |
| ; | |
| } | |
| for (i = 0; i < 6; ++i) | |
| out_8(&mb->padr, dev->dev_addr[i] = p[i]); | |
| if (mp->chipid != BROKEN_ADDRCHG_REV) | |
| out_8(&mb->iac, 0); | |
| } | |
| static int mace_set_address(struct net_device *dev, void *addr) | |
| { | |
| struct mace_data *mp = netdev_priv(dev); | |
| volatile struct mace __iomem *mb = mp->mace; | |
| unsigned long flags; | |
| spin_lock_irqsave(&mp->lock, flags); | |
| __mace_set_address(dev, addr); | |
| /* note: setting ADDRCHG clears ENRCV */ | |
| out_8(&mb->maccc, mp->maccc); | |
| spin_unlock_irqrestore(&mp->lock, flags); | |
| return 0; | |
| } | |
| static inline void mace_clean_rings(struct mace_data *mp) | |
| { | |
| int i; | |
| /* free some skb's */ | |
| for (i = 0; i < N_RX_RING; ++i) { | |
| if (mp->rx_bufs[i] != NULL) { | |
| dev_kfree_skb(mp->rx_bufs[i]); | |
| mp->rx_bufs[i] = NULL; | |
| } | |
| } | |
| for (i = mp->tx_empty; i != mp->tx_fill; ) { | |
| dev_kfree_skb(mp->tx_bufs[i]); | |
| if (++i >= N_TX_RING) | |
| i = 0; | |
| } | |
| } | |
| static int mace_open(struct net_device *dev) | |
| { | |
| struct mace_data *mp = netdev_priv(dev); | |
| volatile struct mace __iomem *mb = mp->mace; | |
| volatile struct dbdma_regs __iomem *rd = mp->rx_dma; | |
| volatile struct dbdma_regs __iomem *td = mp->tx_dma; | |
| volatile struct dbdma_cmd *cp; | |
| int i; | |
| struct sk_buff *skb; | |
| unsigned char *data; | |
| /* reset the chip */ | |
| mace_reset(dev); | |
| /* initialize list of sk_buffs for receiving and set up recv dma */ | |
| mace_clean_rings(mp); | |
| memset((char *)mp->rx_cmds, 0, N_RX_RING * sizeof(struct dbdma_cmd)); | |
| cp = mp->rx_cmds; | |
| for (i = 0; i < N_RX_RING - 1; ++i) { | |
| skb = netdev_alloc_skb(dev, RX_BUFLEN + 2); | |
| if (!skb) { | |
| data = dummy_buf; | |
| } else { | |
| skb_reserve(skb, 2); /* so IP header lands on 4-byte bdry */ | |
| data = skb->data; | |
| } | |
| mp->rx_bufs[i] = skb; | |
| cp->req_count = cpu_to_le16(RX_BUFLEN); | |
| cp->command = cpu_to_le16(INPUT_LAST + INTR_ALWAYS); | |
| cp->phy_addr = cpu_to_le32(virt_to_bus(data)); | |
| cp->xfer_status = 0; | |
| ++cp; | |
| } | |
| mp->rx_bufs[i] = NULL; | |
| cp->command = cpu_to_le16(DBDMA_STOP); | |
| mp->rx_fill = i; | |
| mp->rx_empty = 0; | |
| /* Put a branch back to the beginning of the receive command list */ | |
| ++cp; | |
| cp->command = cpu_to_le16(DBDMA_NOP + BR_ALWAYS); | |
| cp->cmd_dep = cpu_to_le32(virt_to_bus(mp->rx_cmds)); | |
| /* start rx dma */ | |
| out_le32(&rd->control, (RUN|PAUSE|FLUSH|WAKE) << 16); /* clear run bit */ | |
| out_le32(&rd->cmdptr, virt_to_bus(mp->rx_cmds)); | |
| out_le32(&rd->control, (RUN << 16) | RUN); | |
| /* put a branch at the end of the tx command list */ | |
| cp = mp->tx_cmds + NCMDS_TX * N_TX_RING; | |
| cp->command = cpu_to_le16(DBDMA_NOP + BR_ALWAYS); | |
| cp->cmd_dep = cpu_to_le32(virt_to_bus(mp->tx_cmds)); | |
| /* reset tx dma */ | |
| out_le32(&td->control, (RUN|PAUSE|FLUSH|WAKE) << 16); | |
| out_le32(&td->cmdptr, virt_to_bus(mp->tx_cmds)); | |
| mp->tx_fill = 0; | |
| mp->tx_empty = 0; | |
| mp->tx_fullup = 0; | |
| mp->tx_active = 0; | |
| mp->tx_bad_runt = 0; | |
| /* turn it on! */ | |
| out_8(&mb->maccc, mp->maccc); | |
| /* enable all interrupts except receive interrupts */ | |
| out_8(&mb->imr, RCVINT); | |
| return 0; | |
| } | |
| static int mace_close(struct net_device *dev) | |
| { | |
| struct mace_data *mp = netdev_priv(dev); | |
| volatile struct mace __iomem *mb = mp->mace; | |
| volatile struct dbdma_regs __iomem *rd = mp->rx_dma; | |
| volatile struct dbdma_regs __iomem *td = mp->tx_dma; | |
| /* disable rx and tx */ | |
| out_8(&mb->maccc, 0); | |
| out_8(&mb->imr, 0xff); /* disable all intrs */ | |
| /* disable rx and tx dma */ | |
| rd->control = cpu_to_le32((RUN|PAUSE|FLUSH|WAKE) << 16); /* clear run bit */ | |
| td->control = cpu_to_le32((RUN|PAUSE|FLUSH|WAKE) << 16); /* clear run bit */ | |
| mace_clean_rings(mp); | |
| return 0; | |
| } | |
| static inline void mace_set_timeout(struct net_device *dev) | |
| { | |
| struct mace_data *mp = netdev_priv(dev); | |
| if (mp->timeout_active) | |
| del_timer(&mp->tx_timeout); | |
| mp->tx_timeout.expires = jiffies + TX_TIMEOUT; | |
| mp->tx_timeout.function = mace_tx_timeout; | |
| mp->tx_timeout.data = (unsigned long) dev; | |
| add_timer(&mp->tx_timeout); | |
| mp->timeout_active = 1; | |
| } | |
| static int mace_xmit_start(struct sk_buff *skb, struct net_device *dev) | |
| { | |
| struct mace_data *mp = netdev_priv(dev); | |
| volatile struct dbdma_regs __iomem *td = mp->tx_dma; | |
| volatile struct dbdma_cmd *cp, *np; | |
| unsigned long flags; | |
| int fill, next, len; | |
| /* see if there's a free slot in the tx ring */ | |
| spin_lock_irqsave(&mp->lock, flags); | |
| fill = mp->tx_fill; | |
| next = fill + 1; | |
| if (next >= N_TX_RING) | |
| next = 0; | |
| if (next == mp->tx_empty) { | |
| netif_stop_queue(dev); | |
| mp->tx_fullup = 1; | |
| spin_unlock_irqrestore(&mp->lock, flags); | |
| return NETDEV_TX_BUSY; /* can't take it at the moment */ | |
| } | |
| spin_unlock_irqrestore(&mp->lock, flags); | |
| /* partially fill in the dma command block */ | |
| len = skb->len; | |
| if (len > ETH_FRAME_LEN) { | |
| printk(KERN_DEBUG "mace: xmit frame too long (%d)\n", len); | |
| len = ETH_FRAME_LEN; | |
| } | |
| mp->tx_bufs[fill] = skb; | |
| cp = mp->tx_cmds + NCMDS_TX * fill; | |
| cp->req_count = cpu_to_le16(len); | |
| cp->phy_addr = cpu_to_le32(virt_to_bus(skb->data)); | |
| np = mp->tx_cmds + NCMDS_TX * next; | |
| out_le16(&np->command, DBDMA_STOP); | |
| /* poke the tx dma channel */ | |
| spin_lock_irqsave(&mp->lock, flags); | |
| mp->tx_fill = next; | |
| if (!mp->tx_bad_runt && mp->tx_active < MAX_TX_ACTIVE) { | |
| out_le16(&cp->xfer_status, 0); | |
| out_le16(&cp->command, OUTPUT_LAST); | |
| out_le32(&td->control, ((RUN|WAKE) << 16) + (RUN|WAKE)); | |
| ++mp->tx_active; | |
| mace_set_timeout(dev); | |
| } | |
| if (++next >= N_TX_RING) | |
| next = 0; | |
| if (next == mp->tx_empty) | |
| netif_stop_queue(dev); | |
| spin_unlock_irqrestore(&mp->lock, flags); | |
| return NETDEV_TX_OK; | |
| } | |
| static void mace_set_multicast(struct net_device *dev) | |
| { | |
| struct mace_data *mp = netdev_priv(dev); | |
| volatile struct mace __iomem *mb = mp->mace; | |
| int i; | |
| u32 crc; | |
| unsigned long flags; | |
| spin_lock_irqsave(&mp->lock, flags); | |
| mp->maccc &= ~PROM; | |
| if (dev->flags & IFF_PROMISC) { | |
| mp->maccc |= PROM; | |
| } else { | |
| unsigned char multicast_filter[8]; | |
| struct netdev_hw_addr *ha; | |
| if (dev->flags & IFF_ALLMULTI) { | |
| for (i = 0; i < 8; i++) | |
| multicast_filter[i] = 0xff; | |
| } else { | |
| for (i = 0; i < 8; i++) | |
| multicast_filter[i] = 0; | |
| netdev_for_each_mc_addr(ha, dev) { | |
| crc = ether_crc_le(6, ha->addr); | |
| i = crc >> 26; /* bit number in multicast_filter */ | |
| multicast_filter[i >> 3] |= 1 << (i & 7); | |
| } | |
| } | |
| #if 0 | |
| printk("Multicast filter :"); | |
| for (i = 0; i < 8; i++) | |
| printk("%02x ", multicast_filter[i]); | |
| printk("\n"); | |
| #endif | |
| if (mp->chipid == BROKEN_ADDRCHG_REV) | |
| out_8(&mb->iac, LOGADDR); | |
| else { | |
| out_8(&mb->iac, ADDRCHG | LOGADDR); | |
| while ((in_8(&mb->iac) & ADDRCHG) != 0) | |
| ; | |
| } | |
| for (i = 0; i < 8; ++i) | |
| out_8(&mb->ladrf, multicast_filter[i]); | |
| if (mp->chipid != BROKEN_ADDRCHG_REV) | |
| out_8(&mb->iac, 0); | |
| } | |
| /* reset maccc */ | |
| out_8(&mb->maccc, mp->maccc); | |
| spin_unlock_irqrestore(&mp->lock, flags); | |
| } | |
| static void mace_handle_misc_intrs(struct mace_data *mp, int intr, struct net_device *dev) | |
| { | |
| volatile struct mace __iomem *mb = mp->mace; | |
| static int mace_babbles, mace_jabbers; | |
| if (intr & MPCO) | |
| dev->stats.rx_missed_errors += 256; | |
| dev->stats.rx_missed_errors += in_8(&mb->mpc); /* reading clears it */ | |
| if (intr & RNTPCO) | |
| dev->stats.rx_length_errors += 256; | |
| dev->stats.rx_length_errors += in_8(&mb->rntpc); /* reading clears it */ | |
| if (intr & CERR) | |
| ++dev->stats.tx_heartbeat_errors; | |
| if (intr & BABBLE) | |
| if (mace_babbles++ < 4) | |
| printk(KERN_DEBUG "mace: babbling transmitter\n"); | |
| if (intr & JABBER) | |
| if (mace_jabbers++ < 4) | |
| printk(KERN_DEBUG "mace: jabbering transceiver\n"); | |
| } | |
| static irqreturn_t mace_interrupt(int irq, void *dev_id) | |
| { | |
| struct net_device *dev = (struct net_device *) dev_id; | |
| struct mace_data *mp = netdev_priv(dev); | |
| volatile struct mace __iomem *mb = mp->mace; | |
| volatile struct dbdma_regs __iomem *td = mp->tx_dma; | |
| volatile struct dbdma_cmd *cp; | |
| int intr, fs, i, stat, x; | |
| int xcount, dstat; | |
| unsigned long flags; | |
| /* static int mace_last_fs, mace_last_xcount; */ | |
| spin_lock_irqsave(&mp->lock, flags); | |
| intr = in_8(&mb->ir); /* read interrupt register */ | |
| in_8(&mb->xmtrc); /* get retries */ | |
| mace_handle_misc_intrs(mp, intr, dev); | |
| i = mp->tx_empty; | |
| while (in_8(&mb->pr) & XMTSV) { | |
| del_timer(&mp->tx_timeout); | |
| mp->timeout_active = 0; | |
| /* | |
| * Clear any interrupt indication associated with this status | |
| * word. This appears to unlatch any error indication from | |
| * the DMA controller. | |
| */ | |
| intr = in_8(&mb->ir); | |
| if (intr != 0) | |
| mace_handle_misc_intrs(mp, intr, dev); | |
| if (mp->tx_bad_runt) { | |
| fs = in_8(&mb->xmtfs); | |
| mp->tx_bad_runt = 0; | |
| out_8(&mb->xmtfc, AUTO_PAD_XMIT); | |
| continue; | |
| } | |
| dstat = le32_to_cpu(td->status); | |
| /* stop DMA controller */ | |
| out_le32(&td->control, RUN << 16); | |
| /* | |
| * xcount is the number of complete frames which have been | |
| * written to the fifo but for which status has not been read. | |
| */ | |
| xcount = (in_8(&mb->fifofc) >> XMTFC_SH) & XMTFC_MASK; | |
| if (xcount == 0 || (dstat & DEAD)) { | |
| /* | |
| * If a packet was aborted before the DMA controller has | |
| * finished transferring it, it seems that there are 2 bytes | |
| * which are stuck in some buffer somewhere. These will get | |
| * transmitted as soon as we read the frame status (which | |
| * reenables the transmit data transfer request). Turning | |
| * off the DMA controller and/or resetting the MACE doesn't | |
| * help. So we disable auto-padding and FCS transmission | |
| * so the two bytes will only be a runt packet which should | |
| * be ignored by other stations. | |
| */ | |
| out_8(&mb->xmtfc, DXMTFCS); | |
| } | |
| fs = in_8(&mb->xmtfs); | |
| if ((fs & XMTSV) == 0) { | |
| printk(KERN_ERR "mace: xmtfs not valid! (fs=%x xc=%d ds=%x)\n", | |
| fs, xcount, dstat); | |
| mace_reset(dev); | |
| /* | |
| * XXX mace likes to hang the machine after a xmtfs error. | |
| * This is hard to reproduce, resetting *may* help | |
| */ | |
| } | |
| cp = mp->tx_cmds + NCMDS_TX * i; | |
| stat = le16_to_cpu(cp->xfer_status); | |
| if ((fs & (UFLO|LCOL|LCAR|RTRY)) || (dstat & DEAD) || xcount == 0) { | |
| /* | |
| * Check whether there were in fact 2 bytes written to | |
| * the transmit FIFO. | |
| */ | |
| udelay(1); | |
| x = (in_8(&mb->fifofc) >> XMTFC_SH) & XMTFC_MASK; | |
| if (x != 0) { | |
| /* there were two bytes with an end-of-packet indication */ | |
| mp->tx_bad_runt = 1; | |
| mace_set_timeout(dev); | |
| } else { | |
| /* | |
| * Either there weren't the two bytes buffered up, or they | |
| * didn't have an end-of-packet indication. | |
| * We flush the transmit FIFO just in case (by setting the | |
| * XMTFWU bit with the transmitter disabled). | |
| */ | |
| out_8(&mb->maccc, in_8(&mb->maccc) & ~ENXMT); | |
| out_8(&mb->fifocc, in_8(&mb->fifocc) | XMTFWU); | |
| udelay(1); | |
| out_8(&mb->maccc, in_8(&mb->maccc) | ENXMT); | |
| out_8(&mb->xmtfc, AUTO_PAD_XMIT); | |
| } | |
| } | |
| /* dma should have finished */ | |
| if (i == mp->tx_fill) { | |
| printk(KERN_DEBUG "mace: tx ring ran out? (fs=%x xc=%d ds=%x)\n", | |
| fs, xcount, dstat); | |
| continue; | |
| } | |
| /* Update stats */ | |
| if (fs & (UFLO|LCOL|LCAR|RTRY)) { | |
| ++dev->stats.tx_errors; | |
| if (fs & LCAR) | |
| ++dev->stats.tx_carrier_errors; | |
| if (fs & (UFLO|LCOL|RTRY)) | |
| ++dev->stats.tx_aborted_errors; | |
| } else { | |
| dev->stats.tx_bytes += mp->tx_bufs[i]->len; | |
| ++dev->stats.tx_packets; | |
| } | |
| dev_kfree_skb_irq(mp->tx_bufs[i]); | |
| --mp->tx_active; | |
| if (++i >= N_TX_RING) | |
| i = 0; | |
| #if 0 | |
| mace_last_fs = fs; | |
| mace_last_xcount = xcount; | |
| #endif | |
| } | |
| if (i != mp->tx_empty) { | |
| mp->tx_fullup = 0; | |
| netif_wake_queue(dev); | |
| } | |
| mp->tx_empty = i; | |
| i += mp->tx_active; | |
| if (i >= N_TX_RING) | |
| i -= N_TX_RING; | |
| if (!mp->tx_bad_runt && i != mp->tx_fill && mp->tx_active < MAX_TX_ACTIVE) { | |
| do { | |
| /* set up the next one */ | |
| cp = mp->tx_cmds + NCMDS_TX * i; | |
| out_le16(&cp->xfer_status, 0); | |
| out_le16(&cp->command, OUTPUT_LAST); | |
| ++mp->tx_active; | |
| if (++i >= N_TX_RING) | |
| i = 0; | |
| } while (i != mp->tx_fill && mp->tx_active < MAX_TX_ACTIVE); | |
| out_le32(&td->control, ((RUN|WAKE) << 16) + (RUN|WAKE)); | |
| mace_set_timeout(dev); | |
| } | |
| spin_unlock_irqrestore(&mp->lock, flags); | |
| return IRQ_HANDLED; | |
| } | |
| static void mace_tx_timeout(unsigned long data) | |
| { | |
| struct net_device *dev = (struct net_device *) data; | |
| struct mace_data *mp = netdev_priv(dev); | |
| volatile struct mace __iomem *mb = mp->mace; | |
| volatile struct dbdma_regs __iomem *td = mp->tx_dma; | |
| volatile struct dbdma_regs __iomem *rd = mp->rx_dma; | |
| volatile struct dbdma_cmd *cp; | |
| unsigned long flags; | |
| int i; | |
| spin_lock_irqsave(&mp->lock, flags); | |
| mp->timeout_active = 0; | |
| if (mp->tx_active == 0 && !mp->tx_bad_runt) | |
| goto out; | |
| /* update various counters */ | |
| mace_handle_misc_intrs(mp, in_8(&mb->ir), dev); | |
| cp = mp->tx_cmds + NCMDS_TX * mp->tx_empty; | |
| /* turn off both tx and rx and reset the chip */ | |
| out_8(&mb->maccc, 0); | |
| printk(KERN_ERR "mace: transmit timeout - resetting\n"); | |
| dbdma_reset(td); | |
| mace_reset(dev); | |
| /* restart rx dma */ | |
| cp = bus_to_virt(le32_to_cpu(rd->cmdptr)); | |
| dbdma_reset(rd); | |
| out_le16(&cp->xfer_status, 0); | |
| out_le32(&rd->cmdptr, virt_to_bus(cp)); | |
| out_le32(&rd->control, (RUN << 16) | RUN); | |
| /* fix up the transmit side */ | |
| i = mp->tx_empty; | |
| mp->tx_active = 0; | |
| ++dev->stats.tx_errors; | |
| if (mp->tx_bad_runt) { | |
| mp->tx_bad_runt = 0; | |
| } else if (i != mp->tx_fill) { | |
| dev_kfree_skb(mp->tx_bufs[i]); | |
| if (++i >= N_TX_RING) | |
| i = 0; | |
| mp->tx_empty = i; | |
| } | |
| mp->tx_fullup = 0; | |
| netif_wake_queue(dev); | |
| if (i != mp->tx_fill) { | |
| cp = mp->tx_cmds + NCMDS_TX * i; | |
| out_le16(&cp->xfer_status, 0); | |
| out_le16(&cp->command, OUTPUT_LAST); | |
| out_le32(&td->cmdptr, virt_to_bus(cp)); | |
| out_le32(&td->control, (RUN << 16) | RUN); | |
| ++mp->tx_active; | |
| mace_set_timeout(dev); | |
| } | |
| /* turn it back on */ | |
| out_8(&mb->imr, RCVINT); | |
| out_8(&mb->maccc, mp->maccc); | |
| out: | |
| spin_unlock_irqrestore(&mp->lock, flags); | |
| } | |
| static irqreturn_t mace_txdma_intr(int irq, void *dev_id) | |
| { | |
| return IRQ_HANDLED; | |
| } | |
| static irqreturn_t mace_rxdma_intr(int irq, void *dev_id) | |
| { | |
| struct net_device *dev = (struct net_device *) dev_id; | |
| struct mace_data *mp = netdev_priv(dev); | |
| volatile struct dbdma_regs __iomem *rd = mp->rx_dma; | |
| volatile struct dbdma_cmd *cp, *np; | |
| int i, nb, stat, next; | |
| struct sk_buff *skb; | |
| unsigned frame_status; | |
| static int mace_lost_status; | |
| unsigned char *data; | |
| unsigned long flags; | |
| spin_lock_irqsave(&mp->lock, flags); | |
| for (i = mp->rx_empty; i != mp->rx_fill; ) { | |
| cp = mp->rx_cmds + i; | |
| stat = le16_to_cpu(cp->xfer_status); | |
| if ((stat & ACTIVE) == 0) { | |
| next = i + 1; | |
| if (next >= N_RX_RING) | |
| next = 0; | |
| np = mp->rx_cmds + next; | |
| if (next != mp->rx_fill && | |
| (le16_to_cpu(np->xfer_status) & ACTIVE) != 0) { | |
| printk(KERN_DEBUG "mace: lost a status word\n"); | |
| ++mace_lost_status; | |
| } else | |
| break; | |
| } | |
| nb = le16_to_cpu(cp->req_count) - le16_to_cpu(cp->res_count); | |
| out_le16(&cp->command, DBDMA_STOP); | |
| /* got a packet, have a look at it */ | |
| skb = mp->rx_bufs[i]; | |
| if (!skb) { | |
| ++dev->stats.rx_dropped; | |
| } else if (nb > 8) { | |
| data = skb->data; | |
| frame_status = (data[nb-3] << 8) + data[nb-4]; | |
| if (frame_status & (RS_OFLO|RS_CLSN|RS_FRAMERR|RS_FCSERR)) { | |
| ++dev->stats.rx_errors; | |
| if (frame_status & RS_OFLO) | |
| ++dev->stats.rx_over_errors; | |
| if (frame_status & RS_FRAMERR) | |
| ++dev->stats.rx_frame_errors; | |
| if (frame_status & RS_FCSERR) | |
| ++dev->stats.rx_crc_errors; | |
| } else { | |
| /* Mace feature AUTO_STRIP_RCV is on by default, dropping the | |
| * FCS on frames with 802.3 headers. This means that Ethernet | |
| * frames have 8 extra octets at the end, while 802.3 frames | |
| * have only 4. We need to correctly account for this. */ | |
| if (*(unsigned short *)(data+12) < 1536) /* 802.3 header */ | |
| nb -= 4; | |
| else /* Ethernet header; mace includes FCS */ | |
| nb -= 8; | |
| skb_put(skb, nb); | |
| skb->protocol = eth_type_trans(skb, dev); | |
| dev->stats.rx_bytes += skb->len; | |
| netif_rx(skb); | |
| mp->rx_bufs[i] = NULL; | |
| ++dev->stats.rx_packets; | |
| } | |
| } else { | |
| ++dev->stats.rx_errors; | |
| ++dev->stats.rx_length_errors; | |
| } | |
| /* advance to next */ | |
| if (++i >= N_RX_RING) | |
| i = 0; | |
| } | |
| mp->rx_empty = i; | |
| i = mp->rx_fill; | |
| for (;;) { | |
| next = i + 1; | |
| if (next >= N_RX_RING) | |
| next = 0; | |
| if (next == mp->rx_empty) | |
| break; | |
| cp = mp->rx_cmds + i; | |
| skb = mp->rx_bufs[i]; | |
| if (!skb) { | |
| skb = netdev_alloc_skb(dev, RX_BUFLEN + 2); | |
| if (skb) { | |
| skb_reserve(skb, 2); | |
| mp->rx_bufs[i] = skb; | |
| } | |
| } | |
| cp->req_count = cpu_to_le16(RX_BUFLEN); | |
| data = skb? skb->data: dummy_buf; | |
| cp->phy_addr = cpu_to_le32(virt_to_bus(data)); | |
| out_le16(&cp->xfer_status, 0); | |
| out_le16(&cp->command, INPUT_LAST + INTR_ALWAYS); | |
| #if 0 | |
| if ((le32_to_cpu(rd->status) & ACTIVE) != 0) { | |
| out_le32(&rd->control, (PAUSE << 16) | PAUSE); | |
| while ((in_le32(&rd->status) & ACTIVE) != 0) | |
| ; | |
| } | |
| #endif | |
| i = next; | |
| } | |
| if (i != mp->rx_fill) { | |
| out_le32(&rd->control, ((RUN|WAKE) << 16) | (RUN|WAKE)); | |
| mp->rx_fill = i; | |
| } | |
| spin_unlock_irqrestore(&mp->lock, flags); | |
| return IRQ_HANDLED; | |
| } | |
| static const struct of_device_id mace_match[] = | |
| { | |
| { | |
| .name = "mace", | |
| }, | |
| {}, | |
| }; | |
| MODULE_DEVICE_TABLE (of, mace_match); | |
| static struct macio_driver mace_driver = | |
| { | |
| .driver = { | |
| .name = "mace", | |
| .owner = THIS_MODULE, | |
| .of_match_table = mace_match, | |
| }, | |
| .probe = mace_probe, | |
| .remove = mace_remove, | |
| }; | |
| static int __init mace_init(void) | |
| { | |
| return macio_register_driver(&mace_driver); | |
| } | |
| static void __exit mace_cleanup(void) | |
| { | |
| macio_unregister_driver(&mace_driver); | |
| kfree(dummy_buf); | |
| dummy_buf = NULL; | |
| } | |
| MODULE_AUTHOR("Paul Mackerras"); | |
| MODULE_DESCRIPTION("PowerMac MACE driver."); | |
| module_param(port_aaui, int, 0); | |
| MODULE_PARM_DESC(port_aaui, "MACE uses AAUI port (0-1)"); | |
| MODULE_LICENSE("GPL"); | |
| module_init(mace_init); | |
| module_exit(mace_cleanup); |