| # | |
| # QLogic network device configuration | |
| # | |
| config NET_VENDOR_QLOGIC | |
| bool "QLogic devices" | |
| default y | |
| depends on PCI | |
| ---help--- | |
| If you have a network (Ethernet) card belonging to this class, say Y. | |
| Note that the answer to this question doesn't directly affect the | |
| kernel: saying N will just cause the configurator to skip all | |
| the questions about QLogic cards. If you say Y, you will be asked for | |
| your specific card in the following questions. | |
| if NET_VENDOR_QLOGIC | |
| config QLA3XXX | |
| tristate "QLogic QLA3XXX Network Driver Support" | |
| depends on PCI | |
| ---help--- | |
| This driver supports QLogic ISP3XXX gigabit Ethernet cards. | |
| To compile this driver as a module, choose M here: the module | |
| will be called qla3xxx. | |
| config QLCNIC | |
| tristate "QLOGIC QLCNIC 1/10Gb Converged Ethernet NIC Support" | |
| depends on PCI | |
| select FW_LOADER | |
| ---help--- | |
| This driver supports QLogic QLE8240 and QLE8242 Converged Ethernet | |
| devices. | |
| config QLCNIC_SRIOV | |
| bool "QLOGIC QLCNIC 83XX family SR-IOV Support" | |
| depends on QLCNIC && PCI_IOV | |
| default y | |
| ---help--- | |
| This configuration parameter enables Single Root Input Output | |
| Virtualization support for QLE83XX Converged Ethernet devices. | |
| This allows for virtual function acceleration in virtualized | |
| environments. | |
| config QLCNIC_DCB | |
| bool "QLOGIC QLCNIC 82XX and 83XX family DCB Support" | |
| depends on QLCNIC && DCB | |
| default y | |
| ---help--- | |
| This configuration parameter enables DCB support in QLE83XX | |
| and QLE82XX Converged Ethernet devices. This allows for DCB | |
| get operations support through rtNetlink interface. Only CEE | |
| mode of DCB is supported. PG and PFC values are related only | |
| to Tx. | |
| config QLCNIC_VXLAN | |
| bool "Virtual eXtensible Local Area Network (VXLAN) offload support" | |
| default n | |
| depends on QLCNIC && VXLAN && !(QLCNIC=y && VXLAN=m) | |
| ---help--- | |
| This enables hardware offload support for VXLAN protocol over QLogic's | |
| 84XX series adapters. | |
| Say Y here if you want to enable hardware offload support for | |
| Virtual eXtensible Local Area Network (VXLAN) in the driver. | |
| config QLCNIC_HWMON | |
| bool "QLOGIC QLCNIC 82XX and 83XX family HWMON support" | |
| depends on QLCNIC && HWMON && !(QLCNIC=y && HWMON=m) | |
| default y | |
| ---help--- | |
| This configuration parameter can be used to read the | |
| board temperature in Converged Ethernet devices | |
| supported by qlcnic. | |
| This data is available via the hwmon sysfs interface. | |
| config QLGE | |
| tristate "QLogic QLGE 10Gb Ethernet Driver Support" | |
| depends on PCI | |
| ---help--- | |
| This driver supports QLogic ISP8XXX 10Gb Ethernet cards. | |
| To compile this driver as a module, choose M here: the module | |
| will be called qlge. | |
| config NETXEN_NIC | |
| tristate "NetXen Multi port (1/10) Gigabit Ethernet NIC" | |
| depends on PCI | |
| select FW_LOADER | |
| ---help--- | |
| This enables the support for NetXen's Gigabit Ethernet card. | |
| config QED | |
| tristate "QLogic QED 25/40/100Gb core driver" | |
| depends on PCI | |
| select ZLIB_INFLATE | |
| ---help--- | |
| This enables the support for ... | |
| config QEDE | |
| tristate "QLogic QED 25/40/100Gb Ethernet NIC" | |
| depends on QED | |
| ---help--- | |
| This enables the support for ... | |
| endif # NET_VENDOR_QLOGIC |