| /* | |
| * Net1080 based USB host-to-host cables | |
| * Copyright (C) 2000-2005 by David Brownell | |
| * | |
| * This program is free software; you can redistribute it and/or modify | |
| * it under the terms of the GNU General Public License as published by | |
| * the Free Software Foundation; either version 2 of the License, or | |
| * (at your option) any later version. | |
| * | |
| * This program is distributed in the hope that it will be useful, | |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| * GNU General Public License for more details. | |
| * | |
| * You should have received a copy of the GNU General Public License | |
| * along with this program; if not, see <http://www.gnu.org/licenses/>. | |
| */ | |
| // #define DEBUG // error path messages, extra info | |
| // #define VERBOSE // more; success messages | |
| #include <linux/module.h> | |
| #include <linux/netdevice.h> | |
| #include <linux/etherdevice.h> | |
| #include <linux/ethtool.h> | |
| #include <linux/workqueue.h> | |
| #include <linux/mii.h> | |
| #include <linux/usb.h> | |
| #include <linux/usb/usbnet.h> | |
| #include <linux/slab.h> | |
| #include <asm/unaligned.h> | |
| /* | |
| * Netchip 1080 driver ... http://www.netchip.com | |
| * (Sept 2004: End-of-life announcement has been sent.) | |
| * Used in (some) LapLink cables | |
| */ | |
| #define frame_errors data[1] | |
| /* | |
| * NetChip framing of ethernet packets, supporting additional error | |
| * checks for links that may drop bulk packets from inside messages. | |
| * Odd USB length == always short read for last usb packet. | |
| * - nc_header | |
| * - Ethernet header (14 bytes) | |
| * - payload | |
| * - (optional padding byte, if needed so length becomes odd) | |
| * - nc_trailer | |
| * | |
| * This framing is to be avoided for non-NetChip devices. | |
| */ | |
| struct nc_header { // packed: | |
| __le16 hdr_len; // sizeof nc_header (LE, all) | |
| __le16 packet_len; // payload size (including ethhdr) | |
| __le16 packet_id; // detects dropped packets | |
| #define MIN_HEADER 6 | |
| // all else is optional, and must start with: | |
| // __le16 vendorId; // from usb-if | |
| // __le16 productId; | |
| } __packed; | |
| #define PAD_BYTE ((unsigned char)0xAC) | |
| struct nc_trailer { | |
| __le16 packet_id; | |
| } __packed; | |
| // packets may use FLAG_FRAMING_NC and optional pad | |
| #define FRAMED_SIZE(mtu) (sizeof (struct nc_header) \ | |
| + sizeof (struct ethhdr) \ | |
| + (mtu) \ | |
| + 1 \ | |
| + sizeof (struct nc_trailer)) | |
| #define MIN_FRAMED FRAMED_SIZE(0) | |
| /* packets _could_ be up to 64KB... */ | |
| #define NC_MAX_PACKET 32767 | |
| /* | |
| * Zero means no timeout; else, how long a 64 byte bulk packet may be queued | |
| * before the hardware drops it. If that's done, the driver will need to | |
| * frame network packets to guard against the dropped USB packets. The win32 | |
| * driver sets this for both sides of the link. | |
| */ | |
| #define NC_READ_TTL_MS ((u8)255) // ms | |
| /* | |
| * We ignore most registers and EEPROM contents. | |
| */ | |
| #define REG_USBCTL ((u8)0x04) | |
| #define REG_TTL ((u8)0x10) | |
| #define REG_STATUS ((u8)0x11) | |
| /* | |
| * Vendor specific requests to read/write data | |
| */ | |
| #define REQUEST_REGISTER ((u8)0x10) | |
| #define REQUEST_EEPROM ((u8)0x11) | |
| static int | |
| nc_vendor_read(struct usbnet *dev, u8 req, u8 regnum, u16 *retval_ptr) | |
| { | |
| int status = usbnet_read_cmd(dev, req, | |
| USB_DIR_IN | USB_TYPE_VENDOR | | |
| USB_RECIP_DEVICE, | |
| 0, regnum, retval_ptr, | |
| sizeof *retval_ptr); | |
| if (status > 0) | |
| status = 0; | |
| if (!status) | |
| le16_to_cpus(retval_ptr); | |
| return status; | |
| } | |
| static inline int | |
| nc_register_read(struct usbnet *dev, u8 regnum, u16 *retval_ptr) | |
| { | |
| return nc_vendor_read(dev, REQUEST_REGISTER, regnum, retval_ptr); | |
| } | |
| // no retval ... can become async, usable in_interrupt() | |
| static void | |
| nc_vendor_write(struct usbnet *dev, u8 req, u8 regnum, u16 value) | |
| { | |
| usbnet_write_cmd(dev, req, | |
| USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, | |
| value, regnum, NULL, 0); | |
| } | |
| static inline void | |
| nc_register_write(struct usbnet *dev, u8 regnum, u16 value) | |
| { | |
| nc_vendor_write(dev, REQUEST_REGISTER, regnum, value); | |
| } | |
| #if 0 | |
| static void nc_dump_registers(struct usbnet *dev) | |
| { | |
| u8 reg; | |
| u16 *vp = kmalloc(sizeof (u16)); | |
| if (!vp) | |
| return; | |
| netdev_dbg(dev->net, "registers:\n"); | |
| for (reg = 0; reg < 0x20; reg++) { | |
| int retval; | |
| // reading some registers is trouble | |
| if (reg >= 0x08 && reg <= 0xf) | |
| continue; | |
| if (reg >= 0x12 && reg <= 0x1e) | |
| continue; | |
| retval = nc_register_read(dev, reg, vp); | |
| if (retval < 0) | |
| netdev_dbg(dev->net, "reg [0x%x] ==> error %d\n", | |
| reg, retval); | |
| else | |
| netdev_dbg(dev->net, "reg [0x%x] = 0x%x\n", reg, *vp); | |
| } | |
| kfree(vp); | |
| } | |
| #endif | |
| /*-------------------------------------------------------------------------*/ | |
| /* | |
| * Control register | |
| */ | |
| #define USBCTL_WRITABLE_MASK 0x1f0f | |
| // bits 15-13 reserved, r/o | |
| #define USBCTL_ENABLE_LANG (1 << 12) | |
| #define USBCTL_ENABLE_MFGR (1 << 11) | |
| #define USBCTL_ENABLE_PROD (1 << 10) | |
| #define USBCTL_ENABLE_SERIAL (1 << 9) | |
| #define USBCTL_ENABLE_DEFAULTS (1 << 8) | |
| // bits 7-4 reserved, r/o | |
| #define USBCTL_FLUSH_OTHER (1 << 3) | |
| #define USBCTL_FLUSH_THIS (1 << 2) | |
| #define USBCTL_DISCONN_OTHER (1 << 1) | |
| #define USBCTL_DISCONN_THIS (1 << 0) | |
| static inline void nc_dump_usbctl(struct usbnet *dev, u16 usbctl) | |
| { | |
| netif_dbg(dev, link, dev->net, | |
| "net1080 %s-%s usbctl 0x%x:%s%s%s%s%s; this%s%s; other%s%s; r/o 0x%x\n", | |
| dev->udev->bus->bus_name, dev->udev->devpath, | |
| usbctl, | |
| (usbctl & USBCTL_ENABLE_LANG) ? " lang" : "", | |
| (usbctl & USBCTL_ENABLE_MFGR) ? " mfgr" : "", | |
| (usbctl & USBCTL_ENABLE_PROD) ? " prod" : "", | |
| (usbctl & USBCTL_ENABLE_SERIAL) ? " serial" : "", | |
| (usbctl & USBCTL_ENABLE_DEFAULTS) ? " defaults" : "", | |
| (usbctl & USBCTL_FLUSH_THIS) ? " FLUSH" : "", | |
| (usbctl & USBCTL_DISCONN_THIS) ? " DIS" : "", | |
| (usbctl & USBCTL_FLUSH_OTHER) ? " FLUSH" : "", | |
| (usbctl & USBCTL_DISCONN_OTHER) ? " DIS" : "", | |
| usbctl & ~USBCTL_WRITABLE_MASK); | |
| } | |
| /*-------------------------------------------------------------------------*/ | |
| /* | |
| * Status register | |
| */ | |
| #define STATUS_PORT_A (1 << 15) | |
| #define STATUS_CONN_OTHER (1 << 14) | |
| #define STATUS_SUSPEND_OTHER (1 << 13) | |
| #define STATUS_MAILBOX_OTHER (1 << 12) | |
| #define STATUS_PACKETS_OTHER(n) (((n) >> 8) & 0x03) | |
| #define STATUS_CONN_THIS (1 << 6) | |
| #define STATUS_SUSPEND_THIS (1 << 5) | |
| #define STATUS_MAILBOX_THIS (1 << 4) | |
| #define STATUS_PACKETS_THIS(n) (((n) >> 0) & 0x03) | |
| #define STATUS_UNSPEC_MASK 0x0c8c | |
| #define STATUS_NOISE_MASK ((u16)~(0x0303|STATUS_UNSPEC_MASK)) | |
| static inline void nc_dump_status(struct usbnet *dev, u16 status) | |
| { | |
| netif_dbg(dev, link, dev->net, | |
| "net1080 %s-%s status 0x%x: this (%c) PKT=%d%s%s%s; other PKT=%d%s%s%s; unspec 0x%x\n", | |
| dev->udev->bus->bus_name, dev->udev->devpath, | |
| status, | |
| // XXX the packet counts don't seem right | |
| // (1 at reset, not 0); maybe UNSPEC too | |
| (status & STATUS_PORT_A) ? 'A' : 'B', | |
| STATUS_PACKETS_THIS(status), | |
| (status & STATUS_CONN_THIS) ? " CON" : "", | |
| (status & STATUS_SUSPEND_THIS) ? " SUS" : "", | |
| (status & STATUS_MAILBOX_THIS) ? " MBOX" : "", | |
| STATUS_PACKETS_OTHER(status), | |
| (status & STATUS_CONN_OTHER) ? " CON" : "", | |
| (status & STATUS_SUSPEND_OTHER) ? " SUS" : "", | |
| (status & STATUS_MAILBOX_OTHER) ? " MBOX" : "", | |
| status & STATUS_UNSPEC_MASK); | |
| } | |
| /*-------------------------------------------------------------------------*/ | |
| /* | |
| * TTL register | |
| */ | |
| #define TTL_THIS(ttl) (0x00ff & ttl) | |
| #define TTL_OTHER(ttl) (0x00ff & (ttl >> 8)) | |
| #define MK_TTL(this,other) ((u16)(((other)<<8)|(0x00ff&(this)))) | |
| static inline void nc_dump_ttl(struct usbnet *dev, u16 ttl) | |
| { | |
| netif_dbg(dev, link, dev->net, "net1080 %s-%s ttl 0x%x this = %d, other = %d\n", | |
| dev->udev->bus->bus_name, dev->udev->devpath, | |
| ttl, TTL_THIS(ttl), TTL_OTHER(ttl)); | |
| } | |
| /*-------------------------------------------------------------------------*/ | |
| static int net1080_reset(struct usbnet *dev) | |
| { | |
| u16 usbctl, status, ttl; | |
| u16 vp; | |
| int retval; | |
| // nc_dump_registers(dev); | |
| if ((retval = nc_register_read(dev, REG_STATUS, &vp)) < 0) { | |
| netdev_dbg(dev->net, "can't read %s-%s status: %d\n", | |
| dev->udev->bus->bus_name, dev->udev->devpath, retval); | |
| goto done; | |
| } | |
| status = vp; | |
| nc_dump_status(dev, status); | |
| if ((retval = nc_register_read(dev, REG_USBCTL, &vp)) < 0) { | |
| netdev_dbg(dev->net, "can't read USBCTL, %d\n", retval); | |
| goto done; | |
| } | |
| usbctl = vp; | |
| nc_dump_usbctl(dev, usbctl); | |
| nc_register_write(dev, REG_USBCTL, | |
| USBCTL_FLUSH_THIS | USBCTL_FLUSH_OTHER); | |
| if ((retval = nc_register_read(dev, REG_TTL, &vp)) < 0) { | |
| netdev_dbg(dev->net, "can't read TTL, %d\n", retval); | |
| goto done; | |
| } | |
| ttl = vp; | |
| // nc_dump_ttl(dev, ttl); | |
| nc_register_write(dev, REG_TTL, | |
| MK_TTL(NC_READ_TTL_MS, TTL_OTHER(ttl)) ); | |
| netdev_dbg(dev->net, "assigned TTL, %d ms\n", NC_READ_TTL_MS); | |
| netif_info(dev, link, dev->net, "port %c, peer %sconnected\n", | |
| (status & STATUS_PORT_A) ? 'A' : 'B', | |
| (status & STATUS_CONN_OTHER) ? "" : "dis"); | |
| retval = 0; | |
| done: | |
| return retval; | |
| } | |
| static int net1080_check_connect(struct usbnet *dev) | |
| { | |
| int retval; | |
| u16 status; | |
| u16 vp; | |
| retval = nc_register_read(dev, REG_STATUS, &vp); | |
| status = vp; | |
| if (retval != 0) { | |
| netdev_dbg(dev->net, "net1080_check_conn read - %d\n", retval); | |
| return retval; | |
| } | |
| if ((status & STATUS_CONN_OTHER) != STATUS_CONN_OTHER) | |
| return -ENOLINK; | |
| return 0; | |
| } | |
| static void nc_ensure_sync(struct usbnet *dev) | |
| { | |
| if (++dev->frame_errors <= 5) | |
| return; | |
| if (usbnet_write_cmd_async(dev, REQUEST_REGISTER, | |
| USB_DIR_OUT | USB_TYPE_VENDOR | | |
| USB_RECIP_DEVICE, | |
| USBCTL_FLUSH_THIS | | |
| USBCTL_FLUSH_OTHER, | |
| REG_USBCTL, NULL, 0)) | |
| return; | |
| netif_dbg(dev, rx_err, dev->net, | |
| "flush net1080; too many framing errors\n"); | |
| dev->frame_errors = 0; | |
| } | |
| static int net1080_rx_fixup(struct usbnet *dev, struct sk_buff *skb) | |
| { | |
| struct nc_header *header; | |
| struct nc_trailer *trailer; | |
| u16 hdr_len, packet_len; | |
| /* This check is no longer done by usbnet */ | |
| if (skb->len < dev->net->hard_header_len) | |
| return 0; | |
| if (!(skb->len & 0x01)) { | |
| netdev_dbg(dev->net, "rx framesize %d range %d..%d mtu %d\n", | |
| skb->len, dev->net->hard_header_len, dev->hard_mtu, | |
| dev->net->mtu); | |
| dev->net->stats.rx_frame_errors++; | |
| nc_ensure_sync(dev); | |
| return 0; | |
| } | |
| header = (struct nc_header *) skb->data; | |
| hdr_len = le16_to_cpup(&header->hdr_len); | |
| packet_len = le16_to_cpup(&header->packet_len); | |
| if (FRAMED_SIZE(packet_len) > NC_MAX_PACKET) { | |
| dev->net->stats.rx_frame_errors++; | |
| netdev_dbg(dev->net, "packet too big, %d\n", packet_len); | |
| nc_ensure_sync(dev); | |
| return 0; | |
| } else if (hdr_len < MIN_HEADER) { | |
| dev->net->stats.rx_frame_errors++; | |
| netdev_dbg(dev->net, "header too short, %d\n", hdr_len); | |
| nc_ensure_sync(dev); | |
| return 0; | |
| } else if (hdr_len > MIN_HEADER) { | |
| // out of band data for us? | |
| netdev_dbg(dev->net, "header OOB, %d bytes\n", hdr_len - MIN_HEADER); | |
| nc_ensure_sync(dev); | |
| // switch (vendor/product ids) { ... } | |
| } | |
| skb_pull(skb, hdr_len); | |
| trailer = (struct nc_trailer *) | |
| (skb->data + skb->len - sizeof *trailer); | |
| skb_trim(skb, skb->len - sizeof *trailer); | |
| if ((packet_len & 0x01) == 0) { | |
| if (skb->data [packet_len] != PAD_BYTE) { | |
| dev->net->stats.rx_frame_errors++; | |
| netdev_dbg(dev->net, "bad pad\n"); | |
| return 0; | |
| } | |
| skb_trim(skb, skb->len - 1); | |
| } | |
| if (skb->len != packet_len) { | |
| dev->net->stats.rx_frame_errors++; | |
| netdev_dbg(dev->net, "bad packet len %d (expected %d)\n", | |
| skb->len, packet_len); | |
| nc_ensure_sync(dev); | |
| return 0; | |
| } | |
| if (header->packet_id != get_unaligned(&trailer->packet_id)) { | |
| dev->net->stats.rx_fifo_errors++; | |
| netdev_dbg(dev->net, "(2+ dropped) rx packet_id mismatch 0x%x 0x%x\n", | |
| le16_to_cpu(header->packet_id), | |
| le16_to_cpu(trailer->packet_id)); | |
| return 0; | |
| } | |
| #if 0 | |
| netdev_dbg(dev->net, "frame <rx h %d p %d id %d\n", header->hdr_len, | |
| header->packet_len, header->packet_id); | |
| #endif | |
| dev->frame_errors = 0; | |
| return 1; | |
| } | |
| static struct sk_buff * | |
| net1080_tx_fixup(struct usbnet *dev, struct sk_buff *skb, gfp_t flags) | |
| { | |
| struct sk_buff *skb2; | |
| struct nc_header *header = NULL; | |
| struct nc_trailer *trailer = NULL; | |
| int padlen = sizeof (struct nc_trailer); | |
| int len = skb->len; | |
| if (!((len + padlen + sizeof (struct nc_header)) & 0x01)) | |
| padlen++; | |
| if (!skb_cloned(skb)) { | |
| int headroom = skb_headroom(skb); | |
| int tailroom = skb_tailroom(skb); | |
| if (padlen <= tailroom && | |
| sizeof(struct nc_header) <= headroom) | |
| /* There's enough head and tail room */ | |
| goto encapsulate; | |
| if ((sizeof (struct nc_header) + padlen) < | |
| (headroom + tailroom)) { | |
| /* There's enough total room, so just readjust */ | |
| skb->data = memmove(skb->head | |
| + sizeof (struct nc_header), | |
| skb->data, skb->len); | |
| skb_set_tail_pointer(skb, len); | |
| goto encapsulate; | |
| } | |
| } | |
| /* Create a new skb to use with the correct size */ | |
| skb2 = skb_copy_expand(skb, | |
| sizeof (struct nc_header), | |
| padlen, | |
| flags); | |
| dev_kfree_skb_any(skb); | |
| if (!skb2) | |
| return skb2; | |
| skb = skb2; | |
| encapsulate: | |
| /* header first */ | |
| header = (struct nc_header *) skb_push(skb, sizeof *header); | |
| header->hdr_len = cpu_to_le16(sizeof (*header)); | |
| header->packet_len = cpu_to_le16(len); | |
| header->packet_id = cpu_to_le16((u16)dev->xid++); | |
| /* maybe pad; then trailer */ | |
| if (!((skb->len + sizeof *trailer) & 0x01)) | |
| *skb_put(skb, 1) = PAD_BYTE; | |
| trailer = (struct nc_trailer *) skb_put(skb, sizeof *trailer); | |
| put_unaligned(header->packet_id, &trailer->packet_id); | |
| #if 0 | |
| netdev_dbg(dev->net, "frame >tx h %d p %d id %d\n", | |
| header->hdr_len, header->packet_len, | |
| header->packet_id); | |
| #endif | |
| return skb; | |
| } | |
| static int net1080_bind(struct usbnet *dev, struct usb_interface *intf) | |
| { | |
| unsigned extra = sizeof (struct nc_header) | |
| + 1 | |
| + sizeof (struct nc_trailer); | |
| dev->net->hard_header_len += extra; | |
| dev->rx_urb_size = dev->net->hard_header_len + dev->net->mtu; | |
| dev->hard_mtu = NC_MAX_PACKET; | |
| return usbnet_get_endpoints (dev, intf); | |
| } | |
| static const struct driver_info net1080_info = { | |
| .description = "NetChip TurboCONNECT", | |
| .flags = FLAG_POINTTOPOINT | FLAG_FRAMING_NC, | |
| .bind = net1080_bind, | |
| .reset = net1080_reset, | |
| .check_connect = net1080_check_connect, | |
| .rx_fixup = net1080_rx_fixup, | |
| .tx_fixup = net1080_tx_fixup, | |
| }; | |
| static const struct usb_device_id products [] = { | |
| { | |
| USB_DEVICE(0x0525, 0x1080), // NetChip ref design | |
| .driver_info = (unsigned long) &net1080_info, | |
| }, { | |
| USB_DEVICE(0x06D0, 0x0622), // Laplink Gold | |
| .driver_info = (unsigned long) &net1080_info, | |
| }, | |
| { }, // END | |
| }; | |
| MODULE_DEVICE_TABLE(usb, products); | |
| static struct usb_driver net1080_driver = { | |
| .name = "net1080", | |
| .id_table = products, | |
| .probe = usbnet_probe, | |
| .disconnect = usbnet_disconnect, | |
| .suspend = usbnet_suspend, | |
| .resume = usbnet_resume, | |
| .disable_hub_initiated_lpm = 1, | |
| }; | |
| module_usb_driver(net1080_driver); | |
| MODULE_AUTHOR("David Brownell"); | |
| MODULE_DESCRIPTION("NetChip 1080 based USB Host-to-Host Links"); | |
| MODULE_LICENSE("GPL"); |