| /* | |
| * Copyright (c) 1999-2013 Petko Manolov (petkan@nucleusys.com) | |
| * | |
| * This program is free software; you can redistribute it and/or modify | |
| * it under the terms of the GNU General Public License version 2 as published | |
| * by the Free Software Foundation. | |
| */ | |
| #ifndef PEGASUS_DEV | |
| #define PEGASUS_II 0x80000000 | |
| #define HAS_HOME_PNA 0x40000000 | |
| #define PEGASUS_MTU 1536 | |
| #define EPROM_WRITE 0x01 | |
| #define EPROM_READ 0x02 | |
| #define EPROM_DONE 0x04 | |
| #define EPROM_WR_ENABLE 0x10 | |
| #define EPROM_LOAD 0x20 | |
| #define PHY_DONE 0x80 | |
| #define PHY_READ 0x40 | |
| #define PHY_WRITE 0x20 | |
| #define DEFAULT_GPIO_RESET 0x24 | |
| #define DEFAULT_GPIO_SET 0x26 | |
| #define PEGASUS_PRESENT 0x00000001 | |
| #define PEGASUS_TX_BUSY 0x00000004 | |
| #define PEGASUS_RX_BUSY 0x00000008 | |
| #define CTRL_URB_RUNNING 0x00000010 | |
| #define CTRL_URB_SLEEP 0x00000020 | |
| #define PEGASUS_UNPLUG 0x00000040 | |
| #define PEGASUS_RX_URB_FAIL 0x00000080 | |
| #define RX_MULTICAST 2 | |
| #define RX_PROMISCUOUS 4 | |
| #define REG_TIMEOUT (HZ) | |
| #define PEGASUS_TX_TIMEOUT (HZ*10) | |
| #define TX_UNDERRUN 0x80 | |
| #define EXCESSIVE_COL 0x40 | |
| #define LATE_COL 0x20 | |
| #define NO_CARRIER 0x10 | |
| #define LOSS_CARRIER 0x08 | |
| #define JABBER_TIMEOUT 0x04 | |
| #define LINK_STATUS 0x01 | |
| #define PEGASUS_REQT_READ 0xc0 | |
| #define PEGASUS_REQT_WRITE 0x40 | |
| #define PEGASUS_REQ_GET_REGS 0xf0 | |
| #define PEGASUS_REQ_SET_REGS 0xf1 | |
| #define PEGASUS_REQ_SET_REG PEGASUS_REQ_SET_REGS | |
| enum pegasus_registers { | |
| EthCtrl0 = 0, | |
| EthCtrl1 = 1, | |
| EthCtrl2 = 2, | |
| EthID = 0x10, | |
| Reg1d = 0x1d, | |
| EpromOffset = 0x20, | |
| EpromData = 0x21, /* 0x21 low, 0x22 high byte */ | |
| EpromCtrl = 0x23, | |
| PhyAddr = 0x25, | |
| PhyData = 0x26, /* 0x26 low, 0x27 high byte */ | |
| PhyCtrl = 0x28, | |
| UsbStst = 0x2a, | |
| EthTxStat0 = 0x2b, | |
| EthTxStat1 = 0x2c, | |
| EthRxStat = 0x2d, | |
| WakeupControl = 0x78, | |
| Reg7b = 0x7b, | |
| Gpio0 = 0x7e, | |
| Gpio1 = 0x7f, | |
| Reg81 = 0x81, | |
| }; | |
| typedef struct pegasus { | |
| struct usb_device *usb; | |
| struct usb_interface *intf; | |
| struct net_device *net; | |
| struct net_device_stats stats; | |
| struct mii_if_info mii; | |
| unsigned flags; | |
| unsigned features; | |
| u32 msg_enable; | |
| u32 wolopts; | |
| int dev_index; | |
| int intr_interval; | |
| struct tasklet_struct rx_tl; | |
| struct delayed_work carrier_check; | |
| struct urb *rx_urb, *tx_urb, *intr_urb; | |
| struct sk_buff *rx_skb; | |
| int chip; | |
| unsigned char intr_buff[8]; | |
| __u8 tx_buff[PEGASUS_MTU]; | |
| __u8 eth_regs[4]; | |
| __u8 phy; | |
| __u8 gpio_res; | |
| } pegasus_t; | |
| struct usb_eth_dev { | |
| char *name; | |
| __u16 vendor; | |
| __u16 device; | |
| __u32 private; /* LSB is gpio reset value */ | |
| }; | |
| #define VENDOR_3COM 0x0506 | |
| #define VENDOR_ABOCOM 0x07b8 | |
| #define VENDOR_ACCTON 0x083a | |
| #define VENDOR_ADMTEK 0x07a6 | |
| #define VENDOR_AEILAB 0x3334 | |
| #define VENDOR_ALLIEDTEL 0x07c9 | |
| #define VENDOR_ATEN 0x0557 | |
| #define VENDOR_BELKIN 0x050d | |
| #define VENDOR_BILLIONTON 0x08dd | |
| #define VENDOR_COMPAQ 0x049f | |
| #define VENDOR_COREGA 0x07aa | |
| #define VENDOR_DLINK 0x2001 | |
| #define VENDOR_ELCON 0x0db7 | |
| #define VENDOR_ELECOM 0x056e | |
| #define VENDOR_ELSA 0x05cc | |
| #define VENDOR_GIGABYTE 0x1044 | |
| #define VENDOR_HAWKING 0x0e66 | |
| #define VENDOR_HP 0x03f0 | |
| #define VENDOR_IODATA 0x04bb | |
| #define VENDOR_KINGSTON 0x0951 | |
| #define VENDOR_LANEED 0x056e | |
| #define VENDOR_LINKSYS 0x066b | |
| #define VENDOR_LINKSYS2 0x077b | |
| #define VENDOR_MELCO 0x0411 | |
| #define VENDOR_MICROSOFT 0x045e | |
| #define VENDOR_MOBILITY 0x1342 | |
| #define VENDOR_NETGEAR 0x0846 | |
| #define VENDOR_OCT 0x0b39 | |
| #define VENDOR_SMARTBRIDGES 0x08d1 | |
| #define VENDOR_SMC 0x0707 | |
| #define VENDOR_SOHOWARE 0x15e8 | |
| #define VENDOR_SIEMENS 0x067c | |
| #else /* PEGASUS_DEV */ | |
| PEGASUS_DEV("3Com USB Ethernet 3C460B", VENDOR_3COM, 0x4601, | |
| DEFAULT_GPIO_RESET | PEGASUS_II) | |
| PEGASUS_DEV("ATEN USB Ethernet UC-110T", VENDOR_ATEN, 0x2007, | |
| DEFAULT_GPIO_RESET | PEGASUS_II) | |
| PEGASUS_DEV("USB HPNA/Ethernet", VENDOR_ABOCOM, 0x110c, | |
| DEFAULT_GPIO_RESET | PEGASUS_II | HAS_HOME_PNA) | |
| PEGASUS_DEV("USB HPNA/Ethernet", VENDOR_ABOCOM, 0x4104, | |
| DEFAULT_GPIO_RESET | HAS_HOME_PNA) | |
| PEGASUS_DEV("USB HPNA/Ethernet", VENDOR_ABOCOM, 0x4004, | |
| DEFAULT_GPIO_RESET | HAS_HOME_PNA) | |
| PEGASUS_DEV("USB HPNA/Ethernet", VENDOR_ABOCOM, 0x4007, | |
| DEFAULT_GPIO_RESET | HAS_HOME_PNA) | |
| PEGASUS_DEV("USB 10/100 Fast Ethernet", VENDOR_ABOCOM, 0x4102, | |
| DEFAULT_GPIO_RESET | PEGASUS_II) | |
| PEGASUS_DEV("USB 10/100 Fast Ethernet", VENDOR_ABOCOM, 0x4002, | |
| DEFAULT_GPIO_RESET) | |
| PEGASUS_DEV("USB 10/100 Fast Ethernet", VENDOR_ABOCOM, 0x400b, | |
| DEFAULT_GPIO_RESET | PEGASUS_II) | |
| PEGASUS_DEV("USB 10/100 Fast Ethernet", VENDOR_ABOCOM, 0x400c, | |
| DEFAULT_GPIO_RESET | PEGASUS_II) | |
| PEGASUS_DEV("USB 10/100 Fast Ethernet", VENDOR_ABOCOM, 0xabc1, | |
| DEFAULT_GPIO_RESET) | |
| PEGASUS_DEV("USB 10/100 Fast Ethernet", VENDOR_ABOCOM, 0x200c, | |
| DEFAULT_GPIO_RESET | PEGASUS_II) | |
| PEGASUS_DEV("Accton USB 10/100 Ethernet Adapter", VENDOR_ACCTON, 0x1046, | |
| DEFAULT_GPIO_RESET) | |
| PEGASUS_DEV("SpeedStream USB 10/100 Ethernet", VENDOR_ACCTON, 0x5046, | |
| DEFAULT_GPIO_RESET | PEGASUS_II) | |
| PEGASUS_DEV("Philips USB 10/100 Ethernet", VENDOR_ACCTON, 0xb004, | |
| DEFAULT_GPIO_RESET | PEGASUS_II) | |
| PEGASUS_DEV("ADMtek ADM8511 \"Pegasus II\" USB Ethernet", | |
| VENDOR_ADMTEK, 0x8511, | |
| DEFAULT_GPIO_RESET | PEGASUS_II | HAS_HOME_PNA) | |
| PEGASUS_DEV("ADMtek ADM8513 \"Pegasus II\" USB Ethernet", | |
| VENDOR_ADMTEK, 0x8513, | |
| DEFAULT_GPIO_RESET | PEGASUS_II) | |
| PEGASUS_DEV("ADMtek ADM8515 \"Pegasus II\" USB-2.0 Ethernet", | |
| VENDOR_ADMTEK, 0x8515, | |
| DEFAULT_GPIO_RESET | PEGASUS_II) | |
| PEGASUS_DEV("ADMtek AN986 \"Pegasus\" USB Ethernet (evaluation board)", | |
| VENDOR_ADMTEK, 0x0986, | |
| DEFAULT_GPIO_RESET | HAS_HOME_PNA) | |
| PEGASUS_DEV("AN986A USB MAC", VENDOR_ADMTEK, 1986, | |
| DEFAULT_GPIO_RESET | PEGASUS_II) | |
| PEGASUS_DEV("AEI USB Fast Ethernet Adapter", VENDOR_AEILAB, 0x1701, | |
| DEFAULT_GPIO_RESET | PEGASUS_II) | |
| PEGASUS_DEV("Allied Telesyn Int. AT-USB100", VENDOR_ALLIEDTEL, 0xb100, | |
| DEFAULT_GPIO_RESET | PEGASUS_II) | |
| /* | |
| * Distinguish between this Belkin adaptor and the Belkin bluetooth adaptors | |
| * with the same product IDs by checking the device class too. | |
| */ | |
| PEGASUS_DEV_CLASS("Belkin F5D5050 USB Ethernet", VENDOR_BELKIN, 0x0121, 0x00, | |
| DEFAULT_GPIO_RESET | PEGASUS_II) | |
| PEGASUS_DEV("Belkin F5U122 10/100 USB Ethernet", VENDOR_BELKIN, 0x0122, | |
| DEFAULT_GPIO_RESET | PEGASUS_II) | |
| PEGASUS_DEV("Billionton USB-100", VENDOR_BILLIONTON, 0x0986, | |
| DEFAULT_GPIO_RESET) | |
| PEGASUS_DEV("Billionton USBLP-100", VENDOR_BILLIONTON, 0x0987, | |
| DEFAULT_GPIO_RESET | HAS_HOME_PNA) | |
| PEGASUS_DEV("iPAQ Networking 10/100 USB", VENDOR_COMPAQ, 0x8511, | |
| DEFAULT_GPIO_RESET | PEGASUS_II) | |
| PEGASUS_DEV("Billionton USBEL-100", VENDOR_BILLIONTON, 0x0988, | |
| DEFAULT_GPIO_RESET) | |
| PEGASUS_DEV("Billionton USBE-100", VENDOR_BILLIONTON, 0x8511, | |
| DEFAULT_GPIO_RESET | PEGASUS_II) | |
| PEGASUS_DEV("Corega FEther USB-TX", VENDOR_COREGA, 0x0004, | |
| DEFAULT_GPIO_RESET) | |
| PEGASUS_DEV("Corega FEther USB-TXS", VENDOR_COREGA, 0x000d, | |
| DEFAULT_GPIO_RESET | PEGASUS_II) | |
| PEGASUS_DEV("D-Link DSB-650TX", VENDOR_DLINK, 0x4001, | |
| DEFAULT_GPIO_RESET) | |
| PEGASUS_DEV("D-Link DSB-650TX", VENDOR_DLINK, 0x4002, | |
| DEFAULT_GPIO_RESET) | |
| PEGASUS_DEV("D-Link DSB-650TX", VENDOR_DLINK, 0x4102, | |
| DEFAULT_GPIO_RESET | PEGASUS_II) | |
| PEGASUS_DEV("D-Link DSB-650TX", VENDOR_DLINK, 0x400b, | |
| DEFAULT_GPIO_RESET | PEGASUS_II) | |
| PEGASUS_DEV("D-Link DSB-650TX", VENDOR_DLINK, 0x200c, | |
| DEFAULT_GPIO_RESET | PEGASUS_II) | |
| PEGASUS_DEV("D-Link DSB-650TX(PNA)", VENDOR_DLINK, 0x4003, | |
| DEFAULT_GPIO_RESET | HAS_HOME_PNA) | |
| PEGASUS_DEV("D-Link DSB-650", VENDOR_DLINK, 0xabc1, | |
| DEFAULT_GPIO_RESET) | |
| PEGASUS_DEV("GOLDPFEIL USB Adapter", VENDOR_ELCON, 0x0002, | |
| DEFAULT_GPIO_RESET | PEGASUS_II | HAS_HOME_PNA) | |
| PEGASUS_DEV("ELECOM USB Ethernet LD-USB20", VENDOR_ELECOM, 0x4010, | |
| DEFAULT_GPIO_RESET | PEGASUS_II) | |
| PEGASUS_DEV("EasiDock Ethernet", VENDOR_MOBILITY, 0x0304, | |
| DEFAULT_GPIO_RESET) | |
| PEGASUS_DEV("Elsa Micolink USB2Ethernet", VENDOR_ELSA, 0x3000, | |
| DEFAULT_GPIO_RESET) | |
| PEGASUS_DEV("GIGABYTE GN-BR402W Wireless Router", VENDOR_GIGABYTE, 0x8002, | |
| DEFAULT_GPIO_RESET) | |
| PEGASUS_DEV("Hawking UF100 10/100 Ethernet", VENDOR_HAWKING, 0x400c, | |
| DEFAULT_GPIO_RESET | PEGASUS_II) | |
| PEGASUS_DEV("HP hn210c Ethernet USB", VENDOR_HP, 0x811c, | |
| DEFAULT_GPIO_RESET | PEGASUS_II) | |
| PEGASUS_DEV("IO DATA USB ET/TX", VENDOR_IODATA, 0x0904, | |
| DEFAULT_GPIO_RESET) | |
| PEGASUS_DEV("IO DATA USB ET/TX-S", VENDOR_IODATA, 0x0913, | |
| DEFAULT_GPIO_RESET | PEGASUS_II) | |
| PEGASUS_DEV("IO DATA USB ETX-US2", VENDOR_IODATA, 0x093a, | |
| DEFAULT_GPIO_RESET | PEGASUS_II) | |
| PEGASUS_DEV("Kingston KNU101TX Ethernet", VENDOR_KINGSTON, 0x000a, | |
| DEFAULT_GPIO_RESET) | |
| PEGASUS_DEV("LANEED USB Ethernet LD-USB/TX", VENDOR_LANEED, 0x4002, | |
| DEFAULT_GPIO_RESET) | |
| PEGASUS_DEV("LANEED USB Ethernet LD-USBL/TX", VENDOR_LANEED, 0x4005, | |
| DEFAULT_GPIO_RESET | PEGASUS_II) | |
| PEGASUS_DEV("LANEED USB Ethernet LD-USB/TX", VENDOR_LANEED, 0x400b, | |
| DEFAULT_GPIO_RESET | PEGASUS_II) | |
| PEGASUS_DEV("LANEED USB Ethernet LD-USB/T", VENDOR_LANEED, 0xabc1, | |
| DEFAULT_GPIO_RESET) | |
| PEGASUS_DEV("LANEED USB Ethernet LD-USB/TX", VENDOR_LANEED, 0x200c, | |
| DEFAULT_GPIO_RESET | PEGASUS_II) | |
| PEGASUS_DEV("Linksys USB10TX", VENDOR_LINKSYS, 0x2202, | |
| DEFAULT_GPIO_RESET) | |
| PEGASUS_DEV("Linksys USB100TX", VENDOR_LINKSYS, 0x2203, | |
| DEFAULT_GPIO_RESET) | |
| PEGASUS_DEV("Linksys USB100TX", VENDOR_LINKSYS, 0x2204, | |
| DEFAULT_GPIO_RESET | HAS_HOME_PNA) | |
| PEGASUS_DEV("Linksys USB10T Ethernet Adapter", VENDOR_LINKSYS, 0x2206, | |
| DEFAULT_GPIO_RESET | PEGASUS_II) | |
| PEGASUS_DEV("Linksys USBVPN1", VENDOR_LINKSYS2, 0x08b4, | |
| DEFAULT_GPIO_RESET) | |
| PEGASUS_DEV("Linksys USB USB100TX", VENDOR_LINKSYS, 0x400b, | |
| DEFAULT_GPIO_RESET | PEGASUS_II) | |
| PEGASUS_DEV("Linksys USB10TX", VENDOR_LINKSYS, 0x200c, | |
| DEFAULT_GPIO_RESET | PEGASUS_II) | |
| PEGASUS_DEV("MELCO/BUFFALO LUA-TX", VENDOR_MELCO, 0x0001, | |
| DEFAULT_GPIO_RESET) | |
| PEGASUS_DEV("MELCO/BUFFALO LUA-TX", VENDOR_MELCO, 0x0005, | |
| DEFAULT_GPIO_RESET) | |
| PEGASUS_DEV("MELCO/BUFFALO LUA2-TX", VENDOR_MELCO, 0x0009, | |
| DEFAULT_GPIO_RESET | PEGASUS_II) | |
| PEGASUS_DEV("Microsoft MN-110", VENDOR_MICROSOFT, 0x007a, | |
| DEFAULT_GPIO_RESET | PEGASUS_II) | |
| PEGASUS_DEV("NETGEAR FA101", VENDOR_NETGEAR, 0x1020, | |
| DEFAULT_GPIO_RESET | PEGASUS_II) | |
| PEGASUS_DEV("OCT Inc.", VENDOR_OCT, 0x0109, | |
| DEFAULT_GPIO_RESET | PEGASUS_II) | |
| PEGASUS_DEV("OCT USB TO Ethernet", VENDOR_OCT, 0x0901, | |
| DEFAULT_GPIO_RESET | PEGASUS_II) | |
| PEGASUS_DEV("smartNIC 2 PnP Adapter", VENDOR_SMARTBRIDGES, 0x0003, | |
| DEFAULT_GPIO_RESET | PEGASUS_II) | |
| PEGASUS_DEV("SMC 202 USB Ethernet", VENDOR_SMC, 0x0200, | |
| DEFAULT_GPIO_RESET) | |
| PEGASUS_DEV("SMC 2206 USB Ethernet", VENDOR_SMC, 0x0201, | |
| DEFAULT_GPIO_RESET | PEGASUS_II) | |
| PEGASUS_DEV("SOHOware NUB100 Ethernet", VENDOR_SOHOWARE, 0x9100, | |
| DEFAULT_GPIO_RESET) | |
| PEGASUS_DEV("SOHOware NUB110 Ethernet", VENDOR_SOHOWARE, 0x9110, | |
| DEFAULT_GPIO_RESET | PEGASUS_II) | |
| PEGASUS_DEV("SpeedStream USB 10/100 Ethernet", VENDOR_SIEMENS, 0x1001, | |
| DEFAULT_GPIO_RESET | PEGASUS_II) | |
| #endif /* PEGASUS_DEV */ |