| /* | |
| * Copyright (c) 2005-2011 Atheros Communications Inc. | |
| * Copyright (c) 2011-2013 Qualcomm Atheros, Inc. | |
| * | |
| * Permission to use, copy, modify, and/or distribute this software for any | |
| * purpose with or without fee is hereby granted, provided that the above | |
| * copyright notice and this permission notice appear in all copies. | |
| * | |
| * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES | |
| * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF | |
| * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR | |
| * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES | |
| * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN | |
| * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF | |
| * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. | |
| */ | |
| #include "mac.h" | |
| #include <net/mac80211.h> | |
| #include <linux/etherdevice.h> | |
| #include "hif.h" | |
| #include "core.h" | |
| #include "debug.h" | |
| #include "wmi.h" | |
| #include "htt.h" | |
| #include "txrx.h" | |
| #include "testmode.h" | |
| #include "wmi.h" | |
| #include "wmi-tlv.h" | |
| #include "wmi-ops.h" | |
| #include "wow.h" | |
| /*********/ | |
| /* Rates */ | |
| /*********/ | |
| static struct ieee80211_rate ath10k_rates[] = { | |
| { .bitrate = 10, | |
| .hw_value = ATH10K_HW_RATE_CCK_LP_1M }, | |
| { .bitrate = 20, | |
| .hw_value = ATH10K_HW_RATE_CCK_LP_2M, | |
| .hw_value_short = ATH10K_HW_RATE_CCK_SP_2M, | |
| .flags = IEEE80211_RATE_SHORT_PREAMBLE }, | |
| { .bitrate = 55, | |
| .hw_value = ATH10K_HW_RATE_CCK_LP_5_5M, | |
| .hw_value_short = ATH10K_HW_RATE_CCK_SP_5_5M, | |
| .flags = IEEE80211_RATE_SHORT_PREAMBLE }, | |
| { .bitrate = 110, | |
| .hw_value = ATH10K_HW_RATE_CCK_LP_11M, | |
| .hw_value_short = ATH10K_HW_RATE_CCK_SP_11M, | |
| .flags = IEEE80211_RATE_SHORT_PREAMBLE }, | |
| { .bitrate = 60, .hw_value = ATH10K_HW_RATE_OFDM_6M }, | |
| { .bitrate = 90, .hw_value = ATH10K_HW_RATE_OFDM_9M }, | |
| { .bitrate = 120, .hw_value = ATH10K_HW_RATE_OFDM_12M }, | |
| { .bitrate = 180, .hw_value = ATH10K_HW_RATE_OFDM_18M }, | |
| { .bitrate = 240, .hw_value = ATH10K_HW_RATE_OFDM_24M }, | |
| { .bitrate = 360, .hw_value = ATH10K_HW_RATE_OFDM_36M }, | |
| { .bitrate = 480, .hw_value = ATH10K_HW_RATE_OFDM_48M }, | |
| { .bitrate = 540, .hw_value = ATH10K_HW_RATE_OFDM_54M }, | |
| }; | |
| #define ATH10K_MAC_FIRST_OFDM_RATE_IDX 4 | |
| #define ath10k_a_rates (ath10k_rates + ATH10K_MAC_FIRST_OFDM_RATE_IDX) | |
| #define ath10k_a_rates_size (ARRAY_SIZE(ath10k_rates) - \ | |
| ATH10K_MAC_FIRST_OFDM_RATE_IDX) | |
| #define ath10k_g_rates (ath10k_rates + 0) | |
| #define ath10k_g_rates_size (ARRAY_SIZE(ath10k_rates)) | |
| static bool ath10k_mac_bitrate_is_cck(int bitrate) | |
| { | |
| switch (bitrate) { | |
| case 10: | |
| case 20: | |
| case 55: | |
| case 110: | |
| return true; | |
| } | |
| return false; | |
| } | |
| static u8 ath10k_mac_bitrate_to_rate(int bitrate) | |
| { | |
| return DIV_ROUND_UP(bitrate, 5) | | |
| (ath10k_mac_bitrate_is_cck(bitrate) ? BIT(7) : 0); | |
| } | |
| u8 ath10k_mac_hw_rate_to_idx(const struct ieee80211_supported_band *sband, | |
| u8 hw_rate) | |
| { | |
| const struct ieee80211_rate *rate; | |
| int i; | |
| for (i = 0; i < sband->n_bitrates; i++) { | |
| rate = &sband->bitrates[i]; | |
| if (rate->hw_value == hw_rate) | |
| return i; | |
| else if (rate->flags & IEEE80211_RATE_SHORT_PREAMBLE && | |
| rate->hw_value_short == hw_rate) | |
| return i; | |
| } | |
| return 0; | |
| } | |
| u8 ath10k_mac_bitrate_to_idx(const struct ieee80211_supported_band *sband, | |
| u32 bitrate) | |
| { | |
| int i; | |
| for (i = 0; i < sband->n_bitrates; i++) | |
| if (sband->bitrates[i].bitrate == bitrate) | |
| return i; | |
| return 0; | |
| } | |
| static int ath10k_mac_get_max_vht_mcs_map(u16 mcs_map, int nss) | |
| { | |
| switch ((mcs_map >> (2 * nss)) & 0x3) { | |
| case IEEE80211_VHT_MCS_SUPPORT_0_7: return BIT(8) - 1; | |
| case IEEE80211_VHT_MCS_SUPPORT_0_8: return BIT(9) - 1; | |
| case IEEE80211_VHT_MCS_SUPPORT_0_9: return BIT(10) - 1; | |
| } | |
| return 0; | |
| } | |
| static u32 | |
| ath10k_mac_max_ht_nss(const u8 ht_mcs_mask[IEEE80211_HT_MCS_MASK_LEN]) | |
| { | |
| int nss; | |
| for (nss = IEEE80211_HT_MCS_MASK_LEN - 1; nss >= 0; nss--) | |
| if (ht_mcs_mask[nss]) | |
| return nss + 1; | |
| return 1; | |
| } | |
| static u32 | |
| ath10k_mac_max_vht_nss(const u16 vht_mcs_mask[NL80211_VHT_NSS_MAX]) | |
| { | |
| int nss; | |
| for (nss = NL80211_VHT_NSS_MAX - 1; nss >= 0; nss--) | |
| if (vht_mcs_mask[nss]) | |
| return nss + 1; | |
| return 1; | |
| } | |
| /**********/ | |
| /* Crypto */ | |
| /**********/ | |
| static int ath10k_send_key(struct ath10k_vif *arvif, | |
| struct ieee80211_key_conf *key, | |
| enum set_key_cmd cmd, | |
| const u8 *macaddr, u32 flags) | |
| { | |
| struct ath10k *ar = arvif->ar; | |
| struct wmi_vdev_install_key_arg arg = { | |
| .vdev_id = arvif->vdev_id, | |
| .key_idx = key->keyidx, | |
| .key_len = key->keylen, | |
| .key_data = key->key, | |
| .key_flags = flags, | |
| .macaddr = macaddr, | |
| }; | |
| lockdep_assert_held(&arvif->ar->conf_mutex); | |
| switch (key->cipher) { | |
| case WLAN_CIPHER_SUITE_CCMP: | |
| arg.key_cipher = WMI_CIPHER_AES_CCM; | |
| key->flags |= IEEE80211_KEY_FLAG_GENERATE_IV_MGMT; | |
| break; | |
| case WLAN_CIPHER_SUITE_TKIP: | |
| arg.key_cipher = WMI_CIPHER_TKIP; | |
| arg.key_txmic_len = 8; | |
| arg.key_rxmic_len = 8; | |
| break; | |
| case WLAN_CIPHER_SUITE_WEP40: | |
| case WLAN_CIPHER_SUITE_WEP104: | |
| arg.key_cipher = WMI_CIPHER_WEP; | |
| break; | |
| case WLAN_CIPHER_SUITE_AES_CMAC: | |
| WARN_ON(1); | |
| return -EINVAL; | |
| default: | |
| ath10k_warn(ar, "cipher %d is not supported\n", key->cipher); | |
| return -EOPNOTSUPP; | |
| } | |
| if (test_bit(ATH10K_FLAG_RAW_MODE, &ar->dev_flags)) | |
| key->flags |= IEEE80211_KEY_FLAG_GENERATE_IV; | |
| if (cmd == DISABLE_KEY) { | |
| arg.key_cipher = WMI_CIPHER_NONE; | |
| arg.key_data = NULL; | |
| } | |
| return ath10k_wmi_vdev_install_key(arvif->ar, &arg); | |
| } | |
| static int ath10k_install_key(struct ath10k_vif *arvif, | |
| struct ieee80211_key_conf *key, | |
| enum set_key_cmd cmd, | |
| const u8 *macaddr, u32 flags) | |
| { | |
| struct ath10k *ar = arvif->ar; | |
| int ret; | |
| unsigned long time_left; | |
| lockdep_assert_held(&ar->conf_mutex); | |
| reinit_completion(&ar->install_key_done); | |
| if (arvif->nohwcrypt) | |
| return 1; | |
| ret = ath10k_send_key(arvif, key, cmd, macaddr, flags); | |
| if (ret) | |
| return ret; | |
| time_left = wait_for_completion_timeout(&ar->install_key_done, 3 * HZ); | |
| if (time_left == 0) | |
| return -ETIMEDOUT; | |
| return 0; | |
| } | |
| static int ath10k_install_peer_wep_keys(struct ath10k_vif *arvif, | |
| const u8 *addr) | |
| { | |
| struct ath10k *ar = arvif->ar; | |
| struct ath10k_peer *peer; | |
| int ret; | |
| int i; | |
| u32 flags; | |
| lockdep_assert_held(&ar->conf_mutex); | |
| if (WARN_ON(arvif->vif->type != NL80211_IFTYPE_AP && | |
| arvif->vif->type != NL80211_IFTYPE_ADHOC)) | |
| return -EINVAL; | |
| spin_lock_bh(&ar->data_lock); | |
| peer = ath10k_peer_find(ar, arvif->vdev_id, addr); | |
| spin_unlock_bh(&ar->data_lock); | |
| if (!peer) | |
| return -ENOENT; | |
| for (i = 0; i < ARRAY_SIZE(arvif->wep_keys); i++) { | |
| if (arvif->wep_keys[i] == NULL) | |
| continue; | |
| switch (arvif->vif->type) { | |
| case NL80211_IFTYPE_AP: | |
| flags = WMI_KEY_PAIRWISE; | |
| if (arvif->def_wep_key_idx == i) | |
| flags |= WMI_KEY_TX_USAGE; | |
| ret = ath10k_install_key(arvif, arvif->wep_keys[i], | |
| SET_KEY, addr, flags); | |
| if (ret < 0) | |
| return ret; | |
| break; | |
| case NL80211_IFTYPE_ADHOC: | |
| ret = ath10k_install_key(arvif, arvif->wep_keys[i], | |
| SET_KEY, addr, | |
| WMI_KEY_PAIRWISE); | |
| if (ret < 0) | |
| return ret; | |
| ret = ath10k_install_key(arvif, arvif->wep_keys[i], | |
| SET_KEY, addr, WMI_KEY_GROUP); | |
| if (ret < 0) | |
| return ret; | |
| break; | |
| default: | |
| WARN_ON(1); | |
| return -EINVAL; | |
| } | |
| spin_lock_bh(&ar->data_lock); | |
| peer->keys[i] = arvif->wep_keys[i]; | |
| spin_unlock_bh(&ar->data_lock); | |
| } | |
| /* In some cases (notably with static WEP IBSS with multiple keys) | |
| * multicast Tx becomes broken. Both pairwise and groupwise keys are | |
| * installed already. Using WMI_KEY_TX_USAGE in different combinations | |
| * didn't seem help. Using def_keyid vdev parameter seems to be | |
| * effective so use that. | |
| * | |
| * FIXME: Revisit. Perhaps this can be done in a less hacky way. | |
| */ | |
| if (arvif->vif->type != NL80211_IFTYPE_ADHOC) | |
| return 0; | |
| if (arvif->def_wep_key_idx == -1) | |
| return 0; | |
| ret = ath10k_wmi_vdev_set_param(arvif->ar, | |
| arvif->vdev_id, | |
| arvif->ar->wmi.vdev_param->def_keyid, | |
| arvif->def_wep_key_idx); | |
| if (ret) { | |
| ath10k_warn(ar, "failed to re-set def wpa key idxon vdev %i: %d\n", | |
| arvif->vdev_id, ret); | |
| return ret; | |
| } | |
| return 0; | |
| } | |
| static int ath10k_clear_peer_keys(struct ath10k_vif *arvif, | |
| const u8 *addr) | |
| { | |
| struct ath10k *ar = arvif->ar; | |
| struct ath10k_peer *peer; | |
| int first_errno = 0; | |
| int ret; | |
| int i; | |
| u32 flags = 0; | |
| lockdep_assert_held(&ar->conf_mutex); | |
| spin_lock_bh(&ar->data_lock); | |
| peer = ath10k_peer_find(ar, arvif->vdev_id, addr); | |
| spin_unlock_bh(&ar->data_lock); | |
| if (!peer) | |
| return -ENOENT; | |
| for (i = 0; i < ARRAY_SIZE(peer->keys); i++) { | |
| if (peer->keys[i] == NULL) | |
| continue; | |
| /* key flags are not required to delete the key */ | |
| ret = ath10k_install_key(arvif, peer->keys[i], | |
| DISABLE_KEY, addr, flags); | |
| if (ret < 0 && first_errno == 0) | |
| first_errno = ret; | |
| if (ret < 0) | |
| ath10k_warn(ar, "failed to remove peer wep key %d: %d\n", | |
| i, ret); | |
| spin_lock_bh(&ar->data_lock); | |
| peer->keys[i] = NULL; | |
| spin_unlock_bh(&ar->data_lock); | |
| } | |
| return first_errno; | |
| } | |
| bool ath10k_mac_is_peer_wep_key_set(struct ath10k *ar, const u8 *addr, | |
| u8 keyidx) | |
| { | |
| struct ath10k_peer *peer; | |
| int i; | |
| lockdep_assert_held(&ar->data_lock); | |
| /* We don't know which vdev this peer belongs to, | |
| * since WMI doesn't give us that information. | |
| * | |
| * FIXME: multi-bss needs to be handled. | |
| */ | |
| peer = ath10k_peer_find(ar, 0, addr); | |
| if (!peer) | |
| return false; | |
| for (i = 0; i < ARRAY_SIZE(peer->keys); i++) { | |
| if (peer->keys[i] && peer->keys[i]->keyidx == keyidx) | |
| return true; | |
| } | |
| return false; | |
| } | |
| static int ath10k_clear_vdev_key(struct ath10k_vif *arvif, | |
| struct ieee80211_key_conf *key) | |
| { | |
| struct ath10k *ar = arvif->ar; | |
| struct ath10k_peer *peer; | |
| u8 addr[ETH_ALEN]; | |
| int first_errno = 0; | |
| int ret; | |
| int i; | |
| u32 flags = 0; | |
| lockdep_assert_held(&ar->conf_mutex); | |
| for (;;) { | |
| /* since ath10k_install_key we can't hold data_lock all the | |
| * time, so we try to remove the keys incrementally */ | |
| spin_lock_bh(&ar->data_lock); | |
| i = 0; | |
| list_for_each_entry(peer, &ar->peers, list) { | |
| for (i = 0; i < ARRAY_SIZE(peer->keys); i++) { | |
| if (peer->keys[i] == key) { | |
| ether_addr_copy(addr, peer->addr); | |
| peer->keys[i] = NULL; | |
| break; | |
| } | |
| } | |
| if (i < ARRAY_SIZE(peer->keys)) | |
| break; | |
| } | |
| spin_unlock_bh(&ar->data_lock); | |
| if (i == ARRAY_SIZE(peer->keys)) | |
| break; | |
| /* key flags are not required to delete the key */ | |
| ret = ath10k_install_key(arvif, key, DISABLE_KEY, addr, flags); | |
| if (ret < 0 && first_errno == 0) | |
| first_errno = ret; | |
| if (ret) | |
| ath10k_warn(ar, "failed to remove key for %pM: %d\n", | |
| addr, ret); | |
| } | |
| return first_errno; | |
| } | |
| static int ath10k_mac_vif_update_wep_key(struct ath10k_vif *arvif, | |
| struct ieee80211_key_conf *key) | |
| { | |
| struct ath10k *ar = arvif->ar; | |
| struct ath10k_peer *peer; | |
| int ret; | |
| lockdep_assert_held(&ar->conf_mutex); | |
| list_for_each_entry(peer, &ar->peers, list) { | |
| if (!memcmp(peer->addr, arvif->vif->addr, ETH_ALEN)) | |
| continue; | |
| if (!memcmp(peer->addr, arvif->bssid, ETH_ALEN)) | |
| continue; | |
| if (peer->keys[key->keyidx] == key) | |
| continue; | |
| ath10k_dbg(ar, ATH10K_DBG_MAC, "mac vif vdev %i update key %i needs update\n", | |
| arvif->vdev_id, key->keyidx); | |
| ret = ath10k_install_peer_wep_keys(arvif, peer->addr); | |
| if (ret) { | |
| ath10k_warn(ar, "failed to update wep keys on vdev %i for peer %pM: %d\n", | |
| arvif->vdev_id, peer->addr, ret); | |
| return ret; | |
| } | |
| } | |
| return 0; | |
| } | |
| /*********************/ | |
| /* General utilities */ | |
| /*********************/ | |
| static inline enum wmi_phy_mode | |
| chan_to_phymode(const struct cfg80211_chan_def *chandef) | |
| { | |
| enum wmi_phy_mode phymode = MODE_UNKNOWN; | |
| switch (chandef->chan->band) { | |
| case IEEE80211_BAND_2GHZ: | |
| switch (chandef->width) { | |
| case NL80211_CHAN_WIDTH_20_NOHT: | |
| if (chandef->chan->flags & IEEE80211_CHAN_NO_OFDM) | |
| phymode = MODE_11B; | |
| else | |
| phymode = MODE_11G; | |
| break; | |
| case NL80211_CHAN_WIDTH_20: | |
| phymode = MODE_11NG_HT20; | |
| break; | |
| case NL80211_CHAN_WIDTH_40: | |
| phymode = MODE_11NG_HT40; | |
| break; | |
| case NL80211_CHAN_WIDTH_5: | |
| case NL80211_CHAN_WIDTH_10: | |
| case NL80211_CHAN_WIDTH_80: | |
| case NL80211_CHAN_WIDTH_80P80: | |
| case NL80211_CHAN_WIDTH_160: | |
| phymode = MODE_UNKNOWN; | |
| break; | |
| } | |
| break; | |
| case IEEE80211_BAND_5GHZ: | |
| switch (chandef->width) { | |
| case NL80211_CHAN_WIDTH_20_NOHT: | |
| phymode = MODE_11A; | |
| break; | |
| case NL80211_CHAN_WIDTH_20: | |
| phymode = MODE_11NA_HT20; | |
| break; | |
| case NL80211_CHAN_WIDTH_40: | |
| phymode = MODE_11NA_HT40; | |
| break; | |
| case NL80211_CHAN_WIDTH_80: | |
| phymode = MODE_11AC_VHT80; | |
| break; | |
| case NL80211_CHAN_WIDTH_5: | |
| case NL80211_CHAN_WIDTH_10: | |
| case NL80211_CHAN_WIDTH_80P80: | |
| case NL80211_CHAN_WIDTH_160: | |
| phymode = MODE_UNKNOWN; | |
| break; | |
| } | |
| break; | |
| default: | |
| break; | |
| } | |
| WARN_ON(phymode == MODE_UNKNOWN); | |
| return phymode; | |
| } | |
| static u8 ath10k_parse_mpdudensity(u8 mpdudensity) | |
| { | |
| /* | |
| * 802.11n D2.0 defined values for "Minimum MPDU Start Spacing": | |
| * 0 for no restriction | |
| * 1 for 1/4 us | |
| * 2 for 1/2 us | |
| * 3 for 1 us | |
| * 4 for 2 us | |
| * 5 for 4 us | |
| * 6 for 8 us | |
| * 7 for 16 us | |
| */ | |
| switch (mpdudensity) { | |
| case 0: | |
| return 0; | |
| case 1: | |
| case 2: | |
| case 3: | |
| /* Our lower layer calculations limit our precision to | |
| 1 microsecond */ | |
| return 1; | |
| case 4: | |
| return 2; | |
| case 5: | |
| return 4; | |
| case 6: | |
| return 8; | |
| case 7: | |
| return 16; | |
| default: | |
| return 0; | |
| } | |
| } | |
| int ath10k_mac_vif_chan(struct ieee80211_vif *vif, | |
| struct cfg80211_chan_def *def) | |
| { | |
| struct ieee80211_chanctx_conf *conf; | |
| rcu_read_lock(); | |
| conf = rcu_dereference(vif->chanctx_conf); | |
| if (!conf) { | |
| rcu_read_unlock(); | |
| return -ENOENT; | |
| } | |
| *def = conf->def; | |
| rcu_read_unlock(); | |
| return 0; | |
| } | |
| static void ath10k_mac_num_chanctxs_iter(struct ieee80211_hw *hw, | |
| struct ieee80211_chanctx_conf *conf, | |
| void *data) | |
| { | |
| int *num = data; | |
| (*num)++; | |
| } | |
| static int ath10k_mac_num_chanctxs(struct ath10k *ar) | |
| { | |
| int num = 0; | |
| ieee80211_iter_chan_contexts_atomic(ar->hw, | |
| ath10k_mac_num_chanctxs_iter, | |
| &num); | |
| return num; | |
| } | |
| static void | |
| ath10k_mac_get_any_chandef_iter(struct ieee80211_hw *hw, | |
| struct ieee80211_chanctx_conf *conf, | |
| void *data) | |
| { | |
| struct cfg80211_chan_def **def = data; | |
| *def = &conf->def; | |
| } | |
| static int ath10k_peer_create(struct ath10k *ar, u32 vdev_id, const u8 *addr, | |
| enum wmi_peer_type peer_type) | |
| { | |
| struct ath10k_vif *arvif; | |
| int num_peers = 0; | |
| int ret; | |
| lockdep_assert_held(&ar->conf_mutex); | |
| num_peers = ar->num_peers; | |
| /* Each vdev consumes a peer entry as well */ | |
| list_for_each_entry(arvif, &ar->arvifs, list) | |
| num_peers++; | |
| if (num_peers >= ar->max_num_peers) | |
| return -ENOBUFS; | |
| ret = ath10k_wmi_peer_create(ar, vdev_id, addr, peer_type); | |
| if (ret) { | |
| ath10k_warn(ar, "failed to create wmi peer %pM on vdev %i: %i\n", | |
| addr, vdev_id, ret); | |
| return ret; | |
| } | |
| ret = ath10k_wait_for_peer_created(ar, vdev_id, addr); | |
| if (ret) { | |
| ath10k_warn(ar, "failed to wait for created wmi peer %pM on vdev %i: %i\n", | |
| addr, vdev_id, ret); | |
| return ret; | |
| } | |
| ar->num_peers++; | |
| return 0; | |
| } | |
| static int ath10k_mac_set_kickout(struct ath10k_vif *arvif) | |
| { | |
| struct ath10k *ar = arvif->ar; | |
| u32 param; | |
| int ret; | |
| param = ar->wmi.pdev_param->sta_kickout_th; | |
| ret = ath10k_wmi_pdev_set_param(ar, param, | |
| ATH10K_KICKOUT_THRESHOLD); | |
| if (ret) { | |
| ath10k_warn(ar, "failed to set kickout threshold on vdev %i: %d\n", | |
| arvif->vdev_id, ret); | |
| return ret; | |
| } | |
| param = ar->wmi.vdev_param->ap_keepalive_min_idle_inactive_time_secs; | |
| ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id, param, | |
| ATH10K_KEEPALIVE_MIN_IDLE); | |
| if (ret) { | |
| ath10k_warn(ar, "failed to set keepalive minimum idle time on vdev %i: %d\n", | |
| arvif->vdev_id, ret); | |
| return ret; | |
| } | |
| param = ar->wmi.vdev_param->ap_keepalive_max_idle_inactive_time_secs; | |
| ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id, param, | |
| ATH10K_KEEPALIVE_MAX_IDLE); | |
| if (ret) { | |
| ath10k_warn(ar, "failed to set keepalive maximum idle time on vdev %i: %d\n", | |
| arvif->vdev_id, ret); | |
| return ret; | |
| } | |
| param = ar->wmi.vdev_param->ap_keepalive_max_unresponsive_time_secs; | |
| ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id, param, | |
| ATH10K_KEEPALIVE_MAX_UNRESPONSIVE); | |
| if (ret) { | |
| ath10k_warn(ar, "failed to set keepalive maximum unresponsive time on vdev %i: %d\n", | |
| arvif->vdev_id, ret); | |
| return ret; | |
| } | |
| return 0; | |
| } | |
| static int ath10k_mac_set_rts(struct ath10k_vif *arvif, u32 value) | |
| { | |
| struct ath10k *ar = arvif->ar; | |
| u32 vdev_param; | |
| vdev_param = ar->wmi.vdev_param->rts_threshold; | |
| return ath10k_wmi_vdev_set_param(ar, arvif->vdev_id, vdev_param, value); | |
| } | |
| static int ath10k_peer_delete(struct ath10k *ar, u32 vdev_id, const u8 *addr) | |
| { | |
| int ret; | |
| lockdep_assert_held(&ar->conf_mutex); | |
| ret = ath10k_wmi_peer_delete(ar, vdev_id, addr); | |
| if (ret) | |
| return ret; | |
| ret = ath10k_wait_for_peer_deleted(ar, vdev_id, addr); | |
| if (ret) | |
| return ret; | |
| ar->num_peers--; | |
| return 0; | |
| } | |
| static void ath10k_peer_cleanup(struct ath10k *ar, u32 vdev_id) | |
| { | |
| struct ath10k_peer *peer, *tmp; | |
| lockdep_assert_held(&ar->conf_mutex); | |
| spin_lock_bh(&ar->data_lock); | |
| list_for_each_entry_safe(peer, tmp, &ar->peers, list) { | |
| if (peer->vdev_id != vdev_id) | |
| continue; | |
| ath10k_warn(ar, "removing stale peer %pM from vdev_id %d\n", | |
| peer->addr, vdev_id); | |
| list_del(&peer->list); | |
| kfree(peer); | |
| ar->num_peers--; | |
| } | |
| spin_unlock_bh(&ar->data_lock); | |
| } | |
| static void ath10k_peer_cleanup_all(struct ath10k *ar) | |
| { | |
| struct ath10k_peer *peer, *tmp; | |
| lockdep_assert_held(&ar->conf_mutex); | |
| spin_lock_bh(&ar->data_lock); | |
| list_for_each_entry_safe(peer, tmp, &ar->peers, list) { | |
| list_del(&peer->list); | |
| kfree(peer); | |
| } | |
| spin_unlock_bh(&ar->data_lock); | |
| ar->num_peers = 0; | |
| ar->num_stations = 0; | |
| } | |
| static int ath10k_mac_tdls_peer_update(struct ath10k *ar, u32 vdev_id, | |
| struct ieee80211_sta *sta, | |
| enum wmi_tdls_peer_state state) | |
| { | |
| int ret; | |
| struct wmi_tdls_peer_update_cmd_arg arg = {}; | |
| struct wmi_tdls_peer_capab_arg cap = {}; | |
| struct wmi_channel_arg chan_arg = {}; | |
| lockdep_assert_held(&ar->conf_mutex); | |
| arg.vdev_id = vdev_id; | |
| arg.peer_state = state; | |
| ether_addr_copy(arg.addr, sta->addr); | |
| cap.peer_max_sp = sta->max_sp; | |
| cap.peer_uapsd_queues = sta->uapsd_queues; | |
| if (state == WMI_TDLS_PEER_STATE_CONNECTED && | |
| !sta->tdls_initiator) | |
| cap.is_peer_responder = 1; | |
| ret = ath10k_wmi_tdls_peer_update(ar, &arg, &cap, &chan_arg); | |
| if (ret) { | |
| ath10k_warn(ar, "failed to update tdls peer %pM on vdev %i: %i\n", | |
| arg.addr, vdev_id, ret); | |
| return ret; | |
| } | |
| return 0; | |
| } | |
| /************************/ | |
| /* Interface management */ | |
| /************************/ | |
| void ath10k_mac_vif_beacon_free(struct ath10k_vif *arvif) | |
| { | |
| struct ath10k *ar = arvif->ar; | |
| lockdep_assert_held(&ar->data_lock); | |
| if (!arvif->beacon) | |
| return; | |
| if (!arvif->beacon_buf) | |
| dma_unmap_single(ar->dev, ATH10K_SKB_CB(arvif->beacon)->paddr, | |
| arvif->beacon->len, DMA_TO_DEVICE); | |
| if (WARN_ON(arvif->beacon_state != ATH10K_BEACON_SCHEDULED && | |
| arvif->beacon_state != ATH10K_BEACON_SENT)) | |
| return; | |
| dev_kfree_skb_any(arvif->beacon); | |
| arvif->beacon = NULL; | |
| arvif->beacon_state = ATH10K_BEACON_SCHEDULED; | |
| } | |
| static void ath10k_mac_vif_beacon_cleanup(struct ath10k_vif *arvif) | |
| { | |
| struct ath10k *ar = arvif->ar; | |
| lockdep_assert_held(&ar->data_lock); | |
| ath10k_mac_vif_beacon_free(arvif); | |
| if (arvif->beacon_buf) { | |
| dma_free_coherent(ar->dev, IEEE80211_MAX_FRAME_LEN, | |
| arvif->beacon_buf, arvif->beacon_paddr); | |
| arvif->beacon_buf = NULL; | |
| } | |
| } | |
| static inline int ath10k_vdev_setup_sync(struct ath10k *ar) | |
| { | |
| unsigned long time_left; | |
| lockdep_assert_held(&ar->conf_mutex); | |
| if (test_bit(ATH10K_FLAG_CRASH_FLUSH, &ar->dev_flags)) | |
| return -ESHUTDOWN; | |
| time_left = wait_for_completion_timeout(&ar->vdev_setup_done, | |
| ATH10K_VDEV_SETUP_TIMEOUT_HZ); | |
| if (time_left == 0) | |
| return -ETIMEDOUT; | |
| return 0; | |
| } | |
| static int ath10k_monitor_vdev_start(struct ath10k *ar, int vdev_id) | |
| { | |
| struct cfg80211_chan_def *chandef = NULL; | |
| struct ieee80211_channel *channel = NULL; | |
| struct wmi_vdev_start_request_arg arg = {}; | |
| int ret = 0; | |
| lockdep_assert_held(&ar->conf_mutex); | |
| ieee80211_iter_chan_contexts_atomic(ar->hw, | |
| ath10k_mac_get_any_chandef_iter, | |
| &chandef); | |
| if (WARN_ON_ONCE(!chandef)) | |
| return -ENOENT; | |
| channel = chandef->chan; | |
| arg.vdev_id = vdev_id; | |
| arg.channel.freq = channel->center_freq; | |
| arg.channel.band_center_freq1 = chandef->center_freq1; | |
| /* TODO setup this dynamically, what in case we | |
| don't have any vifs? */ | |
| arg.channel.mode = chan_to_phymode(chandef); | |
| arg.channel.chan_radar = | |
| !!(channel->flags & IEEE80211_CHAN_RADAR); | |
| arg.channel.min_power = 0; | |
| arg.channel.max_power = channel->max_power * 2; | |
| arg.channel.max_reg_power = channel->max_reg_power * 2; | |
| arg.channel.max_antenna_gain = channel->max_antenna_gain * 2; | |
| reinit_completion(&ar->vdev_setup_done); | |
| ret = ath10k_wmi_vdev_start(ar, &arg); | |
| if (ret) { | |
| ath10k_warn(ar, "failed to request monitor vdev %i start: %d\n", | |
| vdev_id, ret); | |
| return ret; | |
| } | |
| ret = ath10k_vdev_setup_sync(ar); | |
| if (ret) { | |
| ath10k_warn(ar, "failed to synchronize setup for monitor vdev %i start: %d\n", | |
| vdev_id, ret); | |
| return ret; | |
| } | |
| ret = ath10k_wmi_vdev_up(ar, vdev_id, 0, ar->mac_addr); | |
| if (ret) { | |
| ath10k_warn(ar, "failed to put up monitor vdev %i: %d\n", | |
| vdev_id, ret); | |
| goto vdev_stop; | |
| } | |
| ar->monitor_vdev_id = vdev_id; | |
| ath10k_dbg(ar, ATH10K_DBG_MAC, "mac monitor vdev %i started\n", | |
| ar->monitor_vdev_id); | |
| return 0; | |
| vdev_stop: | |
| ret = ath10k_wmi_vdev_stop(ar, ar->monitor_vdev_id); | |
| if (ret) | |
| ath10k_warn(ar, "failed to stop monitor vdev %i after start failure: %d\n", | |
| ar->monitor_vdev_id, ret); | |
| return ret; | |
| } | |
| static int ath10k_monitor_vdev_stop(struct ath10k *ar) | |
| { | |
| int ret = 0; | |
| lockdep_assert_held(&ar->conf_mutex); | |
| ret = ath10k_wmi_vdev_down(ar, ar->monitor_vdev_id); | |
| if (ret) | |
| ath10k_warn(ar, "failed to put down monitor vdev %i: %d\n", | |
| ar->monitor_vdev_id, ret); | |
| reinit_completion(&ar->vdev_setup_done); | |
| ret = ath10k_wmi_vdev_stop(ar, ar->monitor_vdev_id); | |
| if (ret) | |
| ath10k_warn(ar, "failed to to request monitor vdev %i stop: %d\n", | |
| ar->monitor_vdev_id, ret); | |
| ret = ath10k_vdev_setup_sync(ar); | |
| if (ret) | |
| ath10k_warn(ar, "failed to synchronize monitor vdev %i stop: %d\n", | |
| ar->monitor_vdev_id, ret); | |
| ath10k_dbg(ar, ATH10K_DBG_MAC, "mac monitor vdev %i stopped\n", | |
| ar->monitor_vdev_id); | |
| return ret; | |
| } | |
| static int ath10k_monitor_vdev_create(struct ath10k *ar) | |
| { | |
| int bit, ret = 0; | |
| lockdep_assert_held(&ar->conf_mutex); | |
| if (ar->free_vdev_map == 0) { | |
| ath10k_warn(ar, "failed to find free vdev id for monitor vdev\n"); | |
| return -ENOMEM; | |
| } | |
| bit = __ffs64(ar->free_vdev_map); | |
| ar->monitor_vdev_id = bit; | |
| ret = ath10k_wmi_vdev_create(ar, ar->monitor_vdev_id, | |
| WMI_VDEV_TYPE_MONITOR, | |
| 0, ar->mac_addr); | |
| if (ret) { | |
| ath10k_warn(ar, "failed to request monitor vdev %i creation: %d\n", | |
| ar->monitor_vdev_id, ret); | |
| return ret; | |
| } | |
| ar->free_vdev_map &= ~(1LL << ar->monitor_vdev_id); | |
| ath10k_dbg(ar, ATH10K_DBG_MAC, "mac monitor vdev %d created\n", | |
| ar->monitor_vdev_id); | |
| return 0; | |
| } | |
| static int ath10k_monitor_vdev_delete(struct ath10k *ar) | |
| { | |
| int ret = 0; | |
| lockdep_assert_held(&ar->conf_mutex); | |
| ret = ath10k_wmi_vdev_delete(ar, ar->monitor_vdev_id); | |
| if (ret) { | |
| ath10k_warn(ar, "failed to request wmi monitor vdev %i removal: %d\n", | |
| ar->monitor_vdev_id, ret); | |
| return ret; | |
| } | |
| ar->free_vdev_map |= 1LL << ar->monitor_vdev_id; | |
| ath10k_dbg(ar, ATH10K_DBG_MAC, "mac monitor vdev %d deleted\n", | |
| ar->monitor_vdev_id); | |
| return ret; | |
| } | |
| static int ath10k_monitor_start(struct ath10k *ar) | |
| { | |
| int ret; | |
| lockdep_assert_held(&ar->conf_mutex); | |
| ret = ath10k_monitor_vdev_create(ar); | |
| if (ret) { | |
| ath10k_warn(ar, "failed to create monitor vdev: %d\n", ret); | |
| return ret; | |
| } | |
| ret = ath10k_monitor_vdev_start(ar, ar->monitor_vdev_id); | |
| if (ret) { | |
| ath10k_warn(ar, "failed to start monitor vdev: %d\n", ret); | |
| ath10k_monitor_vdev_delete(ar); | |
| return ret; | |
| } | |
| ar->monitor_started = true; | |
| ath10k_dbg(ar, ATH10K_DBG_MAC, "mac monitor started\n"); | |
| return 0; | |
| } | |
| static int ath10k_monitor_stop(struct ath10k *ar) | |
| { | |
| int ret; | |
| lockdep_assert_held(&ar->conf_mutex); | |
| ret = ath10k_monitor_vdev_stop(ar); | |
| if (ret) { | |
| ath10k_warn(ar, "failed to stop monitor vdev: %d\n", ret); | |
| return ret; | |
| } | |
| ret = ath10k_monitor_vdev_delete(ar); | |
| if (ret) { | |
| ath10k_warn(ar, "failed to delete monitor vdev: %d\n", ret); | |
| return ret; | |
| } | |
| ar->monitor_started = false; | |
| ath10k_dbg(ar, ATH10K_DBG_MAC, "mac monitor stopped\n"); | |
| return 0; | |
| } | |
| static bool ath10k_mac_monitor_vdev_is_needed(struct ath10k *ar) | |
| { | |
| int num_ctx; | |
| /* At least one chanctx is required to derive a channel to start | |
| * monitor vdev on. | |
| */ | |
| num_ctx = ath10k_mac_num_chanctxs(ar); | |
| if (num_ctx == 0) | |
| return false; | |
| /* If there's already an existing special monitor interface then don't | |
| * bother creating another monitor vdev. | |
| */ | |
| if (ar->monitor_arvif) | |
| return false; | |
| return ar->monitor || | |
| ar->filter_flags & FIF_OTHER_BSS || | |
| test_bit(ATH10K_CAC_RUNNING, &ar->dev_flags); | |
| } | |
| static bool ath10k_mac_monitor_vdev_is_allowed(struct ath10k *ar) | |
| { | |
| int num_ctx; | |
| num_ctx = ath10k_mac_num_chanctxs(ar); | |
| /* FIXME: Current interface combinations and cfg80211/mac80211 code | |
| * shouldn't allow this but make sure to prevent handling the following | |
| * case anyway since multi-channel DFS hasn't been tested at all. | |
| */ | |
| if (test_bit(ATH10K_CAC_RUNNING, &ar->dev_flags) && num_ctx > 1) | |
| return false; | |
| return true; | |
| } | |
| static int ath10k_monitor_recalc(struct ath10k *ar) | |
| { | |
| bool needed; | |
| bool allowed; | |
| int ret; | |
| lockdep_assert_held(&ar->conf_mutex); | |
| needed = ath10k_mac_monitor_vdev_is_needed(ar); | |
| allowed = ath10k_mac_monitor_vdev_is_allowed(ar); | |
| ath10k_dbg(ar, ATH10K_DBG_MAC, | |
| "mac monitor recalc started? %d needed? %d allowed? %d\n", | |
| ar->monitor_started, needed, allowed); | |
| if (WARN_ON(needed && !allowed)) { | |
| if (ar->monitor_started) { | |
| ath10k_dbg(ar, ATH10K_DBG_MAC, "mac monitor stopping disallowed monitor\n"); | |
| ret = ath10k_monitor_stop(ar); | |
| if (ret) | |
| ath10k_warn(ar, "failed to stop disallowed monitor: %d\n", | |
| ret); | |
| /* not serious */ | |
| } | |
| return -EPERM; | |
| } | |
| if (needed == ar->monitor_started) | |
| return 0; | |
| if (needed) | |
| return ath10k_monitor_start(ar); | |
| else | |
| return ath10k_monitor_stop(ar); | |
| } | |
| static int ath10k_recalc_rtscts_prot(struct ath10k_vif *arvif) | |
| { | |
| struct ath10k *ar = arvif->ar; | |
| u32 vdev_param, rts_cts = 0; | |
| lockdep_assert_held(&ar->conf_mutex); | |
| vdev_param = ar->wmi.vdev_param->enable_rtscts; | |
| rts_cts |= SM(WMI_RTSCTS_ENABLED, WMI_RTSCTS_SET); | |
| if (arvif->num_legacy_stations > 0) | |
| rts_cts |= SM(WMI_RTSCTS_ACROSS_SW_RETRIES, | |
| WMI_RTSCTS_PROFILE); | |
| else | |
| rts_cts |= SM(WMI_RTSCTS_FOR_SECOND_RATESERIES, | |
| WMI_RTSCTS_PROFILE); | |
| return ath10k_wmi_vdev_set_param(ar, arvif->vdev_id, vdev_param, | |
| rts_cts); | |
| } | |
| static int ath10k_start_cac(struct ath10k *ar) | |
| { | |
| int ret; | |
| lockdep_assert_held(&ar->conf_mutex); | |
| set_bit(ATH10K_CAC_RUNNING, &ar->dev_flags); | |
| ret = ath10k_monitor_recalc(ar); | |
| if (ret) { | |
| ath10k_warn(ar, "failed to start monitor (cac): %d\n", ret); | |
| clear_bit(ATH10K_CAC_RUNNING, &ar->dev_flags); | |
| return ret; | |
| } | |
| ath10k_dbg(ar, ATH10K_DBG_MAC, "mac cac start monitor vdev %d\n", | |
| ar->monitor_vdev_id); | |
| return 0; | |
| } | |
| static int ath10k_stop_cac(struct ath10k *ar) | |
| { | |
| lockdep_assert_held(&ar->conf_mutex); | |
| /* CAC is not running - do nothing */ | |
| if (!test_bit(ATH10K_CAC_RUNNING, &ar->dev_flags)) | |
| return 0; | |
| clear_bit(ATH10K_CAC_RUNNING, &ar->dev_flags); | |
| ath10k_monitor_stop(ar); | |
| ath10k_dbg(ar, ATH10K_DBG_MAC, "mac cac finished\n"); | |
| return 0; | |
| } | |
| static void ath10k_mac_has_radar_iter(struct ieee80211_hw *hw, | |
| struct ieee80211_chanctx_conf *conf, | |
| void *data) | |
| { | |
| bool *ret = data; | |
| if (!*ret && conf->radar_enabled) | |
| *ret = true; | |
| } | |
| static bool ath10k_mac_has_radar_enabled(struct ath10k *ar) | |
| { | |
| bool has_radar = false; | |
| ieee80211_iter_chan_contexts_atomic(ar->hw, | |
| ath10k_mac_has_radar_iter, | |
| &has_radar); | |
| return has_radar; | |
| } | |
| static void ath10k_recalc_radar_detection(struct ath10k *ar) | |
| { | |
| int ret; | |
| lockdep_assert_held(&ar->conf_mutex); | |
| ath10k_stop_cac(ar); | |
| if (!ath10k_mac_has_radar_enabled(ar)) | |
| return; | |
| if (ar->num_started_vdevs > 0) | |
| return; | |
| ret = ath10k_start_cac(ar); | |
| if (ret) { | |
| /* | |
| * Not possible to start CAC on current channel so starting | |
| * radiation is not allowed, make this channel DFS_UNAVAILABLE | |
| * by indicating that radar was detected. | |
| */ | |
| ath10k_warn(ar, "failed to start CAC: %d\n", ret); | |
| ieee80211_radar_detected(ar->hw); | |
| } | |
| } | |
| static int ath10k_vdev_stop(struct ath10k_vif *arvif) | |
| { | |
| struct ath10k *ar = arvif->ar; | |
| int ret; | |
| lockdep_assert_held(&ar->conf_mutex); | |
| reinit_completion(&ar->vdev_setup_done); | |
| ret = ath10k_wmi_vdev_stop(ar, arvif->vdev_id); | |
| if (ret) { | |
| ath10k_warn(ar, "failed to stop WMI vdev %i: %d\n", | |
| arvif->vdev_id, ret); | |
| return ret; | |
| } | |
| ret = ath10k_vdev_setup_sync(ar); | |
| if (ret) { | |
| ath10k_warn(ar, "failed to syncronise setup for vdev %i: %d\n", | |
| arvif->vdev_id, ret); | |
| return ret; | |
| } | |
| WARN_ON(ar->num_started_vdevs == 0); | |
| if (ar->num_started_vdevs != 0) { | |
| ar->num_started_vdevs--; | |
| ath10k_recalc_radar_detection(ar); | |
| } | |
| return ret; | |
| } | |
| static int ath10k_vdev_start_restart(struct ath10k_vif *arvif, | |
| const struct cfg80211_chan_def *chandef, | |
| bool restart) | |
| { | |
| struct ath10k *ar = arvif->ar; | |
| struct wmi_vdev_start_request_arg arg = {}; | |
| int ret = 0; | |
| lockdep_assert_held(&ar->conf_mutex); | |
| reinit_completion(&ar->vdev_setup_done); | |
| arg.vdev_id = arvif->vdev_id; | |
| arg.dtim_period = arvif->dtim_period; | |
| arg.bcn_intval = arvif->beacon_interval; | |
| arg.channel.freq = chandef->chan->center_freq; | |
| arg.channel.band_center_freq1 = chandef->center_freq1; | |
| arg.channel.mode = chan_to_phymode(chandef); | |
| arg.channel.min_power = 0; | |
| arg.channel.max_power = chandef->chan->max_power * 2; | |
| arg.channel.max_reg_power = chandef->chan->max_reg_power * 2; | |
| arg.channel.max_antenna_gain = chandef->chan->max_antenna_gain * 2; | |
| if (arvif->vdev_type == WMI_VDEV_TYPE_AP) { | |
| arg.ssid = arvif->u.ap.ssid; | |
| arg.ssid_len = arvif->u.ap.ssid_len; | |
| arg.hidden_ssid = arvif->u.ap.hidden_ssid; | |
| /* For now allow DFS for AP mode */ | |
| arg.channel.chan_radar = | |
| !!(chandef->chan->flags & IEEE80211_CHAN_RADAR); | |
| } else if (arvif->vdev_type == WMI_VDEV_TYPE_IBSS) { | |
| arg.ssid = arvif->vif->bss_conf.ssid; | |
| arg.ssid_len = arvif->vif->bss_conf.ssid_len; | |
| } | |
| ath10k_dbg(ar, ATH10K_DBG_MAC, | |
| "mac vdev %d start center_freq %d phymode %s\n", | |
| arg.vdev_id, arg.channel.freq, | |
| ath10k_wmi_phymode_str(arg.channel.mode)); | |
| if (restart) | |
| ret = ath10k_wmi_vdev_restart(ar, &arg); | |
| else | |
| ret = ath10k_wmi_vdev_start(ar, &arg); | |
| if (ret) { | |
| ath10k_warn(ar, "failed to start WMI vdev %i: %d\n", | |
| arg.vdev_id, ret); | |
| return ret; | |
| } | |
| ret = ath10k_vdev_setup_sync(ar); | |
| if (ret) { | |
| ath10k_warn(ar, | |
| "failed to synchronize setup for vdev %i restart %d: %d\n", | |
| arg.vdev_id, restart, ret); | |
| return ret; | |
| } | |
| ar->num_started_vdevs++; | |
| ath10k_recalc_radar_detection(ar); | |
| return ret; | |
| } | |
| static int ath10k_vdev_start(struct ath10k_vif *arvif, | |
| const struct cfg80211_chan_def *def) | |
| { | |
| return ath10k_vdev_start_restart(arvif, def, false); | |
| } | |
| static int ath10k_vdev_restart(struct ath10k_vif *arvif, | |
| const struct cfg80211_chan_def *def) | |
| { | |
| return ath10k_vdev_start_restart(arvif, def, true); | |
| } | |
| static int ath10k_mac_setup_bcn_p2p_ie(struct ath10k_vif *arvif, | |
| struct sk_buff *bcn) | |
| { | |
| struct ath10k *ar = arvif->ar; | |
| struct ieee80211_mgmt *mgmt; | |
| const u8 *p2p_ie; | |
| int ret; | |
| if (arvif->vdev_type != WMI_VDEV_TYPE_AP) | |
| return 0; | |
| if (arvif->vdev_subtype != WMI_VDEV_SUBTYPE_P2P_GO) | |
| return 0; | |
| mgmt = (void *)bcn->data; | |
| p2p_ie = cfg80211_find_vendor_ie(WLAN_OUI_WFA, WLAN_OUI_TYPE_WFA_P2P, | |
| mgmt->u.beacon.variable, | |
| bcn->len - (mgmt->u.beacon.variable - | |
| bcn->data)); | |
| if (!p2p_ie) | |
| return -ENOENT; | |
| ret = ath10k_wmi_p2p_go_bcn_ie(ar, arvif->vdev_id, p2p_ie); | |
| if (ret) { | |
| ath10k_warn(ar, "failed to submit p2p go bcn ie for vdev %i: %d\n", | |
| arvif->vdev_id, ret); | |
| return ret; | |
| } | |
| return 0; | |
| } | |
| static int ath10k_mac_remove_vendor_ie(struct sk_buff *skb, unsigned int oui, | |
| u8 oui_type, size_t ie_offset) | |
| { | |
| size_t len; | |
| const u8 *next; | |
| const u8 *end; | |
| u8 *ie; | |
| if (WARN_ON(skb->len < ie_offset)) | |
| return -EINVAL; | |
| ie = (u8 *)cfg80211_find_vendor_ie(oui, oui_type, | |
| skb->data + ie_offset, | |
| skb->len - ie_offset); | |
| if (!ie) | |
| return -ENOENT; | |
| len = ie[1] + 2; | |
| end = skb->data + skb->len; | |
| next = ie + len; | |
| if (WARN_ON(next > end)) | |
| return -EINVAL; | |
| memmove(ie, next, end - next); | |
| skb_trim(skb, skb->len - len); | |
| return 0; | |
| } | |
| static int ath10k_mac_setup_bcn_tmpl(struct ath10k_vif *arvif) | |
| { | |
| struct ath10k *ar = arvif->ar; | |
| struct ieee80211_hw *hw = ar->hw; | |
| struct ieee80211_vif *vif = arvif->vif; | |
| struct ieee80211_mutable_offsets offs = {}; | |
| struct sk_buff *bcn; | |
| int ret; | |
| if (!test_bit(WMI_SERVICE_BEACON_OFFLOAD, ar->wmi.svc_map)) | |
| return 0; | |
| if (arvif->vdev_type != WMI_VDEV_TYPE_AP && | |
| arvif->vdev_type != WMI_VDEV_TYPE_IBSS) | |
| return 0; | |
| bcn = ieee80211_beacon_get_template(hw, vif, &offs); | |
| if (!bcn) { | |
| ath10k_warn(ar, "failed to get beacon template from mac80211\n"); | |
| return -EPERM; | |
| } | |
| ret = ath10k_mac_setup_bcn_p2p_ie(arvif, bcn); | |
| if (ret) { | |
| ath10k_warn(ar, "failed to setup p2p go bcn ie: %d\n", ret); | |
| kfree_skb(bcn); | |
| return ret; | |
| } | |
| /* P2P IE is inserted by firmware automatically (as configured above) | |
| * so remove it from the base beacon template to avoid duplicate P2P | |
| * IEs in beacon frames. | |
| */ | |
| ath10k_mac_remove_vendor_ie(bcn, WLAN_OUI_WFA, WLAN_OUI_TYPE_WFA_P2P, | |
| offsetof(struct ieee80211_mgmt, | |
| u.beacon.variable)); | |
| ret = ath10k_wmi_bcn_tmpl(ar, arvif->vdev_id, offs.tim_offset, bcn, 0, | |
| 0, NULL, 0); | |
| kfree_skb(bcn); | |
| if (ret) { | |
| ath10k_warn(ar, "failed to submit beacon template command: %d\n", | |
| ret); | |
| return ret; | |
| } | |
| return 0; | |
| } | |
| static int ath10k_mac_setup_prb_tmpl(struct ath10k_vif *arvif) | |
| { | |
| struct ath10k *ar = arvif->ar; | |
| struct ieee80211_hw *hw = ar->hw; | |
| struct ieee80211_vif *vif = arvif->vif; | |
| struct sk_buff *prb; | |
| int ret; | |
| if (!test_bit(WMI_SERVICE_BEACON_OFFLOAD, ar->wmi.svc_map)) | |
| return 0; | |
| if (arvif->vdev_type != WMI_VDEV_TYPE_AP) | |
| return 0; | |
| prb = ieee80211_proberesp_get(hw, vif); | |
| if (!prb) { | |
| ath10k_warn(ar, "failed to get probe resp template from mac80211\n"); | |
| return -EPERM; | |
| } | |
| ret = ath10k_wmi_prb_tmpl(ar, arvif->vdev_id, prb); | |
| kfree_skb(prb); | |
| if (ret) { | |
| ath10k_warn(ar, "failed to submit probe resp template command: %d\n", | |
| ret); | |
| return ret; | |
| } | |
| return 0; | |
| } | |
| static int ath10k_mac_vif_fix_hidden_ssid(struct ath10k_vif *arvif) | |
| { | |
| struct ath10k *ar = arvif->ar; | |
| struct cfg80211_chan_def def; | |
| int ret; | |
| /* When originally vdev is started during assign_vif_chanctx() some | |
| * information is missing, notably SSID. Firmware revisions with beacon | |
| * offloading require the SSID to be provided during vdev (re)start to | |
| * handle hidden SSID properly. | |
| * | |
| * Vdev restart must be done after vdev has been both started and | |
| * upped. Otherwise some firmware revisions (at least 10.2) fail to | |
| * deliver vdev restart response event causing timeouts during vdev | |
| * syncing in ath10k. | |
| * | |
| * Note: The vdev down/up and template reinstallation could be skipped | |
| * since only wmi-tlv firmware are known to have beacon offload and | |
| * wmi-tlv doesn't seem to misbehave like 10.2 wrt vdev restart | |
| * response delivery. It's probably more robust to keep it as is. | |
| */ | |
| if (!test_bit(WMI_SERVICE_BEACON_OFFLOAD, ar->wmi.svc_map)) | |
| return 0; | |
| if (WARN_ON(!arvif->is_started)) | |
| return -EINVAL; | |
| if (WARN_ON(!arvif->is_up)) | |
| return -EINVAL; | |
| if (WARN_ON(ath10k_mac_vif_chan(arvif->vif, &def))) | |
| return -EINVAL; | |
| ret = ath10k_wmi_vdev_down(ar, arvif->vdev_id); | |
| if (ret) { | |
| ath10k_warn(ar, "failed to bring down ap vdev %i: %d\n", | |
| arvif->vdev_id, ret); | |
| return ret; | |
| } | |
| /* Vdev down reset beacon & presp templates. Reinstall them. Otherwise | |
| * firmware will crash upon vdev up. | |
| */ | |
| ret = ath10k_mac_setup_bcn_tmpl(arvif); | |
| if (ret) { | |
| ath10k_warn(ar, "failed to update beacon template: %d\n", ret); | |
| return ret; | |
| } | |
| ret = ath10k_mac_setup_prb_tmpl(arvif); | |
| if (ret) { | |
| ath10k_warn(ar, "failed to update presp template: %d\n", ret); | |
| return ret; | |
| } | |
| ret = ath10k_vdev_restart(arvif, &def); | |
| if (ret) { | |
| ath10k_warn(ar, "failed to restart ap vdev %i: %d\n", | |
| arvif->vdev_id, ret); | |
| return ret; | |
| } | |
| ret = ath10k_wmi_vdev_up(arvif->ar, arvif->vdev_id, arvif->aid, | |
| arvif->bssid); | |
| if (ret) { | |
| ath10k_warn(ar, "failed to bring up ap vdev %i: %d\n", | |
| arvif->vdev_id, ret); | |
| return ret; | |
| } | |
| return 0; | |
| } | |
| static void ath10k_control_beaconing(struct ath10k_vif *arvif, | |
| struct ieee80211_bss_conf *info) | |
| { | |
| struct ath10k *ar = arvif->ar; | |
| int ret = 0; | |
| lockdep_assert_held(&arvif->ar->conf_mutex); | |
| if (!info->enable_beacon) { | |
| ret = ath10k_wmi_vdev_down(ar, arvif->vdev_id); | |
| if (ret) | |
| ath10k_warn(ar, "failed to down vdev_id %i: %d\n", | |
| arvif->vdev_id, ret); | |
| arvif->is_up = false; | |
| spin_lock_bh(&arvif->ar->data_lock); | |
| ath10k_mac_vif_beacon_free(arvif); | |
| spin_unlock_bh(&arvif->ar->data_lock); | |
| return; | |
| } | |
| arvif->tx_seq_no = 0x1000; | |
| arvif->aid = 0; | |
| ether_addr_copy(arvif->bssid, info->bssid); | |
| ret = ath10k_wmi_vdev_up(arvif->ar, arvif->vdev_id, arvif->aid, | |
| arvif->bssid); | |
| if (ret) { | |
| ath10k_warn(ar, "failed to bring up vdev %d: %i\n", | |
| arvif->vdev_id, ret); | |
| return; | |
| } | |
| arvif->is_up = true; | |
| ret = ath10k_mac_vif_fix_hidden_ssid(arvif); | |
| if (ret) { | |
| ath10k_warn(ar, "failed to fix hidden ssid for vdev %i, expect trouble: %d\n", | |
| arvif->vdev_id, ret); | |
| return; | |
| } | |
| ath10k_dbg(ar, ATH10K_DBG_MAC, "mac vdev %d up\n", arvif->vdev_id); | |
| } | |
| static void ath10k_control_ibss(struct ath10k_vif *arvif, | |
| struct ieee80211_bss_conf *info, | |
| const u8 self_peer[ETH_ALEN]) | |
| { | |
| struct ath10k *ar = arvif->ar; | |
| u32 vdev_param; | |
| int ret = 0; | |
| lockdep_assert_held(&arvif->ar->conf_mutex); | |
| if (!info->ibss_joined) { | |
| if (is_zero_ether_addr(arvif->bssid)) | |
| return; | |
| eth_zero_addr(arvif->bssid); | |
| return; | |
| } | |
| vdev_param = arvif->ar->wmi.vdev_param->atim_window; | |
| ret = ath10k_wmi_vdev_set_param(arvif->ar, arvif->vdev_id, vdev_param, | |
| ATH10K_DEFAULT_ATIM); | |
| if (ret) | |
| ath10k_warn(ar, "failed to set IBSS ATIM for vdev %d: %d\n", | |
| arvif->vdev_id, ret); | |
| } | |
| static int ath10k_mac_vif_recalc_ps_wake_threshold(struct ath10k_vif *arvif) | |
| { | |
| struct ath10k *ar = arvif->ar; | |
| u32 param; | |
| u32 value; | |
| int ret; | |
| lockdep_assert_held(&arvif->ar->conf_mutex); | |
| if (arvif->u.sta.uapsd) | |
| value = WMI_STA_PS_TX_WAKE_THRESHOLD_NEVER; | |
| else | |
| value = WMI_STA_PS_TX_WAKE_THRESHOLD_ALWAYS; | |
| param = WMI_STA_PS_PARAM_TX_WAKE_THRESHOLD; | |
| ret = ath10k_wmi_set_sta_ps_param(ar, arvif->vdev_id, param, value); | |
| if (ret) { | |
| ath10k_warn(ar, "failed to submit ps wake threshold %u on vdev %i: %d\n", | |
| value, arvif->vdev_id, ret); | |
| return ret; | |
| } | |
| return 0; | |
| } | |
| static int ath10k_mac_vif_recalc_ps_poll_count(struct ath10k_vif *arvif) | |
| { | |
| struct ath10k *ar = arvif->ar; | |
| u32 param; | |
| u32 value; | |
| int ret; | |
| lockdep_assert_held(&arvif->ar->conf_mutex); | |
| if (arvif->u.sta.uapsd) | |
| value = WMI_STA_PS_PSPOLL_COUNT_UAPSD; | |
| else | |
| value = WMI_STA_PS_PSPOLL_COUNT_NO_MAX; | |
| param = WMI_STA_PS_PARAM_PSPOLL_COUNT; | |
| ret = ath10k_wmi_set_sta_ps_param(ar, arvif->vdev_id, | |
| param, value); | |
| if (ret) { | |
| ath10k_warn(ar, "failed to submit ps poll count %u on vdev %i: %d\n", | |
| value, arvif->vdev_id, ret); | |
| return ret; | |
| } | |
| return 0; | |
| } | |
| static int ath10k_mac_num_vifs_started(struct ath10k *ar) | |
| { | |
| struct ath10k_vif *arvif; | |
| int num = 0; | |
| lockdep_assert_held(&ar->conf_mutex); | |
| list_for_each_entry(arvif, &ar->arvifs, list) | |
| if (arvif->is_started) | |
| num++; | |
| return num; | |
| } | |
| static int ath10k_mac_vif_setup_ps(struct ath10k_vif *arvif) | |
| { | |
| struct ath10k *ar = arvif->ar; | |
| struct ieee80211_vif *vif = arvif->vif; | |
| struct ieee80211_conf *conf = &ar->hw->conf; | |
| enum wmi_sta_powersave_param param; | |
| enum wmi_sta_ps_mode psmode; | |
| int ret; | |
| int ps_timeout; | |
| bool enable_ps; | |
| lockdep_assert_held(&arvif->ar->conf_mutex); | |
| if (arvif->vif->type != NL80211_IFTYPE_STATION) | |
| return 0; | |
| enable_ps = arvif->ps; | |
| if (enable_ps && ath10k_mac_num_vifs_started(ar) > 1 && | |
| !test_bit(ATH10K_FW_FEATURE_MULTI_VIF_PS_SUPPORT, | |
| ar->fw_features)) { | |
| ath10k_warn(ar, "refusing to enable ps on vdev %i: not supported by fw\n", | |
| arvif->vdev_id); | |
| enable_ps = false; | |
| } | |
| if (!arvif->is_started) { | |
| /* mac80211 can update vif powersave state while disconnected. | |
| * Firmware doesn't behave nicely and consumes more power than | |
| * necessary if PS is disabled on a non-started vdev. Hence | |
| * force-enable PS for non-running vdevs. | |
| */ | |
| psmode = WMI_STA_PS_MODE_ENABLED; | |
| } else if (enable_ps) { | |
| psmode = WMI_STA_PS_MODE_ENABLED; | |
| param = WMI_STA_PS_PARAM_INACTIVITY_TIME; | |
| ps_timeout = conf->dynamic_ps_timeout; | |
| if (ps_timeout == 0) { | |
| /* Firmware doesn't like 0 */ | |
| ps_timeout = ieee80211_tu_to_usec( | |
| vif->bss_conf.beacon_int) / 1000; | |
| } | |
| ret = ath10k_wmi_set_sta_ps_param(ar, arvif->vdev_id, param, | |
| ps_timeout); | |
| if (ret) { | |
| ath10k_warn(ar, "failed to set inactivity time for vdev %d: %i\n", | |
| arvif->vdev_id, ret); | |
| return ret; | |
| } | |
| } else { | |
| psmode = WMI_STA_PS_MODE_DISABLED; | |
| } | |
| ath10k_dbg(ar, ATH10K_DBG_MAC, "mac vdev %d psmode %s\n", | |
| arvif->vdev_id, psmode ? "enable" : "disable"); | |
| ret = ath10k_wmi_set_psmode(ar, arvif->vdev_id, psmode); | |
| if (ret) { | |
| ath10k_warn(ar, "failed to set PS Mode %d for vdev %d: %d\n", | |
| psmode, arvif->vdev_id, ret); | |
| return ret; | |
| } | |
| return 0; | |
| } | |
| static int ath10k_mac_vif_disable_keepalive(struct ath10k_vif *arvif) | |
| { | |
| struct ath10k *ar = arvif->ar; | |
| struct wmi_sta_keepalive_arg arg = {}; | |
| int ret; | |
| lockdep_assert_held(&arvif->ar->conf_mutex); | |
| if (arvif->vdev_type != WMI_VDEV_TYPE_STA) | |
| return 0; | |
| if (!test_bit(WMI_SERVICE_STA_KEEP_ALIVE, ar->wmi.svc_map)) | |
| return 0; | |
| /* Some firmware revisions have a bug and ignore the `enabled` field. | |
| * Instead use the interval to disable the keepalive. | |
| */ | |
| arg.vdev_id = arvif->vdev_id; | |
| arg.enabled = 1; | |
| arg.method = WMI_STA_KEEPALIVE_METHOD_NULL_FRAME; | |
| arg.interval = WMI_STA_KEEPALIVE_INTERVAL_DISABLE; | |
| ret = ath10k_wmi_sta_keepalive(ar, &arg); | |
| if (ret) { | |
| ath10k_warn(ar, "failed to submit keepalive on vdev %i: %d\n", | |
| arvif->vdev_id, ret); | |
| return ret; | |
| } | |
| return 0; | |
| } | |
| static void ath10k_mac_vif_ap_csa_count_down(struct ath10k_vif *arvif) | |
| { | |
| struct ath10k *ar = arvif->ar; | |
| struct ieee80211_vif *vif = arvif->vif; | |
| int ret; | |
| lockdep_assert_held(&arvif->ar->conf_mutex); | |
| if (WARN_ON(!test_bit(WMI_SERVICE_BEACON_OFFLOAD, ar->wmi.svc_map))) | |
| return; | |
| if (arvif->vdev_type != WMI_VDEV_TYPE_AP) | |
| return; | |
| if (!vif->csa_active) | |
| return; | |
| if (!arvif->is_up) | |
| return; | |
| if (!ieee80211_csa_is_complete(vif)) { | |
| ieee80211_csa_update_counter(vif); | |
| ret = ath10k_mac_setup_bcn_tmpl(arvif); | |
| if (ret) | |
| ath10k_warn(ar, "failed to update bcn tmpl during csa: %d\n", | |
| ret); | |
| ret = ath10k_mac_setup_prb_tmpl(arvif); | |
| if (ret) | |
| ath10k_warn(ar, "failed to update prb tmpl during csa: %d\n", | |
| ret); | |
| } else { | |
| ieee80211_csa_finish(vif); | |
| } | |
| } | |
| static void ath10k_mac_vif_ap_csa_work(struct work_struct *work) | |
| { | |
| struct ath10k_vif *arvif = container_of(work, struct ath10k_vif, | |
| ap_csa_work); | |
| struct ath10k *ar = arvif->ar; | |
| mutex_lock(&ar->conf_mutex); | |
| ath10k_mac_vif_ap_csa_count_down(arvif); | |
| mutex_unlock(&ar->conf_mutex); | |
| } | |
| static void ath10k_mac_handle_beacon_iter(void *data, u8 *mac, | |
| struct ieee80211_vif *vif) | |
| { | |
| struct sk_buff *skb = data; | |
| struct ieee80211_mgmt *mgmt = (void *)skb->data; | |
| struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif); | |
| if (vif->type != NL80211_IFTYPE_STATION) | |
| return; | |
| if (!ether_addr_equal(mgmt->bssid, vif->bss_conf.bssid)) | |
| return; | |
| cancel_delayed_work(&arvif->connection_loss_work); | |
| } | |
| void ath10k_mac_handle_beacon(struct ath10k *ar, struct sk_buff *skb) | |
| { | |
| ieee80211_iterate_active_interfaces_atomic(ar->hw, | |
| IEEE80211_IFACE_ITER_NORMAL, | |
| ath10k_mac_handle_beacon_iter, | |
| skb); | |
| } | |
| static void ath10k_mac_handle_beacon_miss_iter(void *data, u8 *mac, | |
| struct ieee80211_vif *vif) | |
| { | |
| u32 *vdev_id = data; | |
| struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif); | |
| struct ath10k *ar = arvif->ar; | |
| struct ieee80211_hw *hw = ar->hw; | |
| if (arvif->vdev_id != *vdev_id) | |
| return; | |
| if (!arvif->is_up) | |
| return; | |
| ieee80211_beacon_loss(vif); | |
| /* Firmware doesn't report beacon loss events repeatedly. If AP probe | |
| * (done by mac80211) succeeds but beacons do not resume then it | |
| * doesn't make sense to continue operation. Queue connection loss work | |
| * which can be cancelled when beacon is received. | |
| */ | |
| ieee80211_queue_delayed_work(hw, &arvif->connection_loss_work, | |
| ATH10K_CONNECTION_LOSS_HZ); | |
| } | |
| void ath10k_mac_handle_beacon_miss(struct ath10k *ar, u32 vdev_id) | |
| { | |
| ieee80211_iterate_active_interfaces_atomic(ar->hw, | |
| IEEE80211_IFACE_ITER_NORMAL, | |
| ath10k_mac_handle_beacon_miss_iter, | |
| &vdev_id); | |
| } | |
| static void ath10k_mac_vif_sta_connection_loss_work(struct work_struct *work) | |
| { | |
| struct ath10k_vif *arvif = container_of(work, struct ath10k_vif, | |
| connection_loss_work.work); | |
| struct ieee80211_vif *vif = arvif->vif; | |
| if (!arvif->is_up) | |
| return; | |
| ieee80211_connection_loss(vif); | |
| } | |
| /**********************/ | |
| /* Station management */ | |
| /**********************/ | |
| static u32 ath10k_peer_assoc_h_listen_intval(struct ath10k *ar, | |
| struct ieee80211_vif *vif) | |
| { | |
| /* Some firmware revisions have unstable STA powersave when listen | |
| * interval is set too high (e.g. 5). The symptoms are firmware doesn't | |
| * generate NullFunc frames properly even if buffered frames have been | |
| * indicated in Beacon TIM. Firmware would seldom wake up to pull | |
| * buffered frames. Often pinging the device from AP would simply fail. | |
| * | |
| * As a workaround set it to 1. | |
| */ | |
| if (vif->type == NL80211_IFTYPE_STATION) | |
| return 1; | |
| return ar->hw->conf.listen_interval; | |
| } | |
| static void ath10k_peer_assoc_h_basic(struct ath10k *ar, | |
| struct ieee80211_vif *vif, | |
| struct ieee80211_sta *sta, | |
| struct wmi_peer_assoc_complete_arg *arg) | |
| { | |
| struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif); | |
| u32 aid; | |
| lockdep_assert_held(&ar->conf_mutex); | |
| if (vif->type == NL80211_IFTYPE_STATION) | |
| aid = vif->bss_conf.aid; | |
| else | |
| aid = sta->aid; | |
| ether_addr_copy(arg->addr, sta->addr); | |
| arg->vdev_id = arvif->vdev_id; | |
| arg->peer_aid = aid; | |
| arg->peer_flags |= WMI_PEER_AUTH; | |
| arg->peer_listen_intval = ath10k_peer_assoc_h_listen_intval(ar, vif); | |
| arg->peer_num_spatial_streams = 1; | |
| arg->peer_caps = vif->bss_conf.assoc_capability; | |
| } | |
| static void ath10k_peer_assoc_h_crypto(struct ath10k *ar, | |
| struct ieee80211_vif *vif, | |
| struct wmi_peer_assoc_complete_arg *arg) | |
| { | |
| struct ieee80211_bss_conf *info = &vif->bss_conf; | |
| struct cfg80211_chan_def def; | |
| struct cfg80211_bss *bss; | |
| const u8 *rsnie = NULL; | |
| const u8 *wpaie = NULL; | |
| lockdep_assert_held(&ar->conf_mutex); | |
| if (WARN_ON(ath10k_mac_vif_chan(vif, &def))) | |
| return; | |
| bss = cfg80211_get_bss(ar->hw->wiphy, def.chan, info->bssid, NULL, 0, | |
| IEEE80211_BSS_TYPE_ANY, IEEE80211_PRIVACY_ANY); | |
| if (bss) { | |
| const struct cfg80211_bss_ies *ies; | |
| rcu_read_lock(); | |
| rsnie = ieee80211_bss_get_ie(bss, WLAN_EID_RSN); | |
| ies = rcu_dereference(bss->ies); | |
| wpaie = cfg80211_find_vendor_ie(WLAN_OUI_MICROSOFT, | |
| WLAN_OUI_TYPE_MICROSOFT_WPA, | |
| ies->data, | |
| ies->len); | |
| rcu_read_unlock(); | |
| cfg80211_put_bss(ar->hw->wiphy, bss); | |
| } | |
| /* FIXME: base on RSN IE/WPA IE is a correct idea? */ | |
| if (rsnie || wpaie) { | |
| ath10k_dbg(ar, ATH10K_DBG_WMI, "%s: rsn ie found\n", __func__); | |
| arg->peer_flags |= WMI_PEER_NEED_PTK_4_WAY; | |
| } | |
| if (wpaie) { | |
| ath10k_dbg(ar, ATH10K_DBG_WMI, "%s: wpa ie found\n", __func__); | |
| arg->peer_flags |= WMI_PEER_NEED_GTK_2_WAY; | |
| } | |
| } | |
| static void ath10k_peer_assoc_h_rates(struct ath10k *ar, | |
| struct ieee80211_vif *vif, | |
| struct ieee80211_sta *sta, | |
| struct wmi_peer_assoc_complete_arg *arg) | |
| { | |
| struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif); | |
| struct wmi_rate_set_arg *rateset = &arg->peer_legacy_rates; | |
| struct cfg80211_chan_def def; | |
| const struct ieee80211_supported_band *sband; | |
| const struct ieee80211_rate *rates; | |
| enum ieee80211_band band; | |
| u32 ratemask; | |
| u8 rate; | |
| int i; | |
| lockdep_assert_held(&ar->conf_mutex); | |
| if (WARN_ON(ath10k_mac_vif_chan(vif, &def))) | |
| return; | |
| band = def.chan->band; | |
| sband = ar->hw->wiphy->bands[band]; | |
| ratemask = sta->supp_rates[band]; | |
| ratemask &= arvif->bitrate_mask.control[band].legacy; | |
| rates = sband->bitrates; | |
| rateset->num_rates = 0; | |
| for (i = 0; i < 32; i++, ratemask >>= 1, rates++) { | |
| if (!(ratemask & 1)) | |
| continue; | |
| rate = ath10k_mac_bitrate_to_rate(rates->bitrate); | |
| rateset->rates[rateset->num_rates] = rate; | |
| rateset->num_rates++; | |
| } | |
| } | |
| static bool | |
| ath10k_peer_assoc_h_ht_masked(const u8 ht_mcs_mask[IEEE80211_HT_MCS_MASK_LEN]) | |
| { | |
| int nss; | |
| for (nss = 0; nss < IEEE80211_HT_MCS_MASK_LEN; nss++) | |
| if (ht_mcs_mask[nss]) | |
| return false; | |
| return true; | |
| } | |
| static bool | |
| ath10k_peer_assoc_h_vht_masked(const u16 vht_mcs_mask[NL80211_VHT_NSS_MAX]) | |
| { | |
| int nss; | |
| for (nss = 0; nss < NL80211_VHT_NSS_MAX; nss++) | |
| if (vht_mcs_mask[nss]) | |
| return false; | |
| return true; | |
| } | |
| static void ath10k_peer_assoc_h_ht(struct ath10k *ar, | |
| struct ieee80211_vif *vif, | |
| struct ieee80211_sta *sta, | |
| struct wmi_peer_assoc_complete_arg *arg) | |
| { | |
| const struct ieee80211_sta_ht_cap *ht_cap = &sta->ht_cap; | |
| struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif); | |
| struct cfg80211_chan_def def; | |
| enum ieee80211_band band; | |
| const u8 *ht_mcs_mask; | |
| const u16 *vht_mcs_mask; | |
| int i, n; | |
| u8 max_nss; | |
| u32 stbc; | |
| lockdep_assert_held(&ar->conf_mutex); | |
| if (WARN_ON(ath10k_mac_vif_chan(vif, &def))) | |
| return; | |
| if (!ht_cap->ht_supported) | |
| return; | |
| band = def.chan->band; | |
| ht_mcs_mask = arvif->bitrate_mask.control[band].ht_mcs; | |
| vht_mcs_mask = arvif->bitrate_mask.control[band].vht_mcs; | |
| if (ath10k_peer_assoc_h_ht_masked(ht_mcs_mask) && | |
| ath10k_peer_assoc_h_vht_masked(vht_mcs_mask)) | |
| return; | |
| arg->peer_flags |= WMI_PEER_HT; | |
| arg->peer_max_mpdu = (1 << (IEEE80211_HT_MAX_AMPDU_FACTOR + | |
| ht_cap->ampdu_factor)) - 1; | |
| arg->peer_mpdu_density = | |
| ath10k_parse_mpdudensity(ht_cap->ampdu_density); | |
| arg->peer_ht_caps = ht_cap->cap; | |
| arg->peer_rate_caps |= WMI_RC_HT_FLAG; | |
| if (ht_cap->cap & IEEE80211_HT_CAP_LDPC_CODING) | |
| arg->peer_flags |= WMI_PEER_LDPC; | |
| if (sta->bandwidth >= IEEE80211_STA_RX_BW_40) { | |
| arg->peer_flags |= WMI_PEER_40MHZ; | |
| arg->peer_rate_caps |= WMI_RC_CW40_FLAG; | |
| } | |
| if (arvif->bitrate_mask.control[band].gi != NL80211_TXRATE_FORCE_LGI) { | |
| if (ht_cap->cap & IEEE80211_HT_CAP_SGI_20) | |
| arg->peer_rate_caps |= WMI_RC_SGI_FLAG; | |
| if (ht_cap->cap & IEEE80211_HT_CAP_SGI_40) | |
| arg->peer_rate_caps |= WMI_RC_SGI_FLAG; | |
| } | |
| if (ht_cap->cap & IEEE80211_HT_CAP_TX_STBC) { | |
| arg->peer_rate_caps |= WMI_RC_TX_STBC_FLAG; | |
| arg->peer_flags |= WMI_PEER_STBC; | |
| } | |
| if (ht_cap->cap & IEEE80211_HT_CAP_RX_STBC) { | |
| stbc = ht_cap->cap & IEEE80211_HT_CAP_RX_STBC; | |
| stbc = stbc >> IEEE80211_HT_CAP_RX_STBC_SHIFT; | |
| stbc = stbc << WMI_RC_RX_STBC_FLAG_S; | |
| arg->peer_rate_caps |= stbc; | |
| arg->peer_flags |= WMI_PEER_STBC; | |
| } | |
| if (ht_cap->mcs.rx_mask[1] && ht_cap->mcs.rx_mask[2]) | |
| arg->peer_rate_caps |= WMI_RC_TS_FLAG; | |
| else if (ht_cap->mcs.rx_mask[1]) | |
| arg->peer_rate_caps |= WMI_RC_DS_FLAG; | |
| for (i = 0, n = 0, max_nss = 0; i < IEEE80211_HT_MCS_MASK_LEN * 8; i++) | |
| if ((ht_cap->mcs.rx_mask[i / 8] & BIT(i % 8)) && | |
| (ht_mcs_mask[i / 8] & BIT(i % 8))) { | |
| max_nss = (i / 8) + 1; | |
| arg->peer_ht_rates.rates[n++] = i; | |
| } | |
| /* | |
| * This is a workaround for HT-enabled STAs which break the spec | |
| * and have no HT capabilities RX mask (no HT RX MCS map). | |
| * | |
| * As per spec, in section 20.3.5 Modulation and coding scheme (MCS), | |
| * MCS 0 through 7 are mandatory in 20MHz with 800 ns GI at all STAs. | |
| * | |
| * Firmware asserts if such situation occurs. | |
| */ | |
| if (n == 0) { | |
| arg->peer_ht_rates.num_rates = 8; | |
| for (i = 0; i < arg->peer_ht_rates.num_rates; i++) | |
| arg->peer_ht_rates.rates[i] = i; | |
| } else { | |
| arg->peer_ht_rates.num_rates = n; | |
| arg->peer_num_spatial_streams = min(sta->rx_nss, max_nss); | |
| } | |
| ath10k_dbg(ar, ATH10K_DBG_MAC, "mac ht peer %pM mcs cnt %d nss %d\n", | |
| arg->addr, | |
| arg->peer_ht_rates.num_rates, | |
| arg->peer_num_spatial_streams); | |
| } | |
| static int ath10k_peer_assoc_qos_ap(struct ath10k *ar, | |
| struct ath10k_vif *arvif, | |
| struct ieee80211_sta *sta) | |
| { | |
| u32 uapsd = 0; | |
| u32 max_sp = 0; | |
| int ret = 0; | |
| lockdep_assert_held(&ar->conf_mutex); | |
| if (sta->wme && sta->uapsd_queues) { | |
| ath10k_dbg(ar, ATH10K_DBG_MAC, "mac uapsd_queues 0x%x max_sp %d\n", | |
| sta->uapsd_queues, sta->max_sp); | |
| if (sta->uapsd_queues & IEEE80211_WMM_IE_STA_QOSINFO_AC_VO) | |
| uapsd |= WMI_AP_PS_UAPSD_AC3_DELIVERY_EN | | |
| WMI_AP_PS_UAPSD_AC3_TRIGGER_EN; | |
| if (sta->uapsd_queues & IEEE80211_WMM_IE_STA_QOSINFO_AC_VI) | |
| uapsd |= WMI_AP_PS_UAPSD_AC2_DELIVERY_EN | | |
| WMI_AP_PS_UAPSD_AC2_TRIGGER_EN; | |
| if (sta->uapsd_queues & IEEE80211_WMM_IE_STA_QOSINFO_AC_BK) | |
| uapsd |= WMI_AP_PS_UAPSD_AC1_DELIVERY_EN | | |
| WMI_AP_PS_UAPSD_AC1_TRIGGER_EN; | |
| if (sta->uapsd_queues & IEEE80211_WMM_IE_STA_QOSINFO_AC_BE) | |
| uapsd |= WMI_AP_PS_UAPSD_AC0_DELIVERY_EN | | |
| WMI_AP_PS_UAPSD_AC0_TRIGGER_EN; | |
| if (sta->max_sp < MAX_WMI_AP_PS_PEER_PARAM_MAX_SP) | |
| max_sp = sta->max_sp; | |
| ret = ath10k_wmi_set_ap_ps_param(ar, arvif->vdev_id, | |
| sta->addr, | |
| WMI_AP_PS_PEER_PARAM_UAPSD, | |
| uapsd); | |
| if (ret) { | |
| ath10k_warn(ar, "failed to set ap ps peer param uapsd for vdev %i: %d\n", | |
| arvif->vdev_id, ret); | |
| return ret; | |
| } | |
| ret = ath10k_wmi_set_ap_ps_param(ar, arvif->vdev_id, | |
| sta->addr, | |
| WMI_AP_PS_PEER_PARAM_MAX_SP, | |
| max_sp); | |
| if (ret) { | |
| ath10k_warn(ar, "failed to set ap ps peer param max sp for vdev %i: %d\n", | |
| arvif->vdev_id, ret); | |
| return ret; | |
| } | |
| /* TODO setup this based on STA listen interval and | |
| beacon interval. Currently we don't know | |
| sta->listen_interval - mac80211 patch required. | |
| Currently use 10 seconds */ | |
| ret = ath10k_wmi_set_ap_ps_param(ar, arvif->vdev_id, sta->addr, | |
| WMI_AP_PS_PEER_PARAM_AGEOUT_TIME, | |
| 10); | |
| if (ret) { | |
| ath10k_warn(ar, "failed to set ap ps peer param ageout time for vdev %i: %d\n", | |
| arvif->vdev_id, ret); | |
| return ret; | |
| } | |
| } | |
| return 0; | |
| } | |
| static u16 | |
| ath10k_peer_assoc_h_vht_limit(u16 tx_mcs_set, | |
| const u16 vht_mcs_limit[NL80211_VHT_NSS_MAX]) | |
| { | |
| int idx_limit; | |
| int nss; | |
| u16 mcs_map; | |
| u16 mcs; | |
| for (nss = 0; nss < NL80211_VHT_NSS_MAX; nss++) { | |
| mcs_map = ath10k_mac_get_max_vht_mcs_map(tx_mcs_set, nss) & | |
| vht_mcs_limit[nss]; | |
| if (mcs_map) | |
| idx_limit = fls(mcs_map) - 1; | |
| else | |
| idx_limit = -1; | |
| switch (idx_limit) { | |
| case 0: /* fall through */ | |
| case 1: /* fall through */ | |
| case 2: /* fall through */ | |
| case 3: /* fall through */ | |
| case 4: /* fall through */ | |
| case 5: /* fall through */ | |
| case 6: /* fall through */ | |
| default: | |
| /* see ath10k_mac_can_set_bitrate_mask() */ | |
| WARN_ON(1); | |
| /* fall through */ | |
| case -1: | |
| mcs = IEEE80211_VHT_MCS_NOT_SUPPORTED; | |
| break; | |
| case 7: | |
| mcs = IEEE80211_VHT_MCS_SUPPORT_0_7; | |
| break; | |
| case 8: | |
| mcs = IEEE80211_VHT_MCS_SUPPORT_0_8; | |
| break; | |
| case 9: | |
| mcs = IEEE80211_VHT_MCS_SUPPORT_0_9; | |
| break; | |
| } | |
| tx_mcs_set &= ~(0x3 << (nss * 2)); | |
| tx_mcs_set |= mcs << (nss * 2); | |
| } | |
| return tx_mcs_set; | |
| } | |
| static void ath10k_peer_assoc_h_vht(struct ath10k *ar, | |
| struct ieee80211_vif *vif, | |
| struct ieee80211_sta *sta, | |
| struct wmi_peer_assoc_complete_arg *arg) | |
| { | |
| const struct ieee80211_sta_vht_cap *vht_cap = &sta->vht_cap; | |
| struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif); | |
| struct cfg80211_chan_def def; | |
| enum ieee80211_band band; | |
| const u16 *vht_mcs_mask; | |
| u8 ampdu_factor; | |
| if (WARN_ON(ath10k_mac_vif_chan(vif, &def))) | |
| return; | |
| if (!vht_cap->vht_supported) | |
| return; | |
| band = def.chan->band; | |
| vht_mcs_mask = arvif->bitrate_mask.control[band].vht_mcs; | |
| if (ath10k_peer_assoc_h_vht_masked(vht_mcs_mask)) | |
| return; | |
| arg->peer_flags |= WMI_PEER_VHT; | |
| if (def.chan->band == IEEE80211_BAND_2GHZ) | |
| arg->peer_flags |= WMI_PEER_VHT_2G; | |
| arg->peer_vht_caps = vht_cap->cap; | |
| ampdu_factor = (vht_cap->cap & | |
| IEEE80211_VHT_CAP_MAX_A_MPDU_LENGTH_EXPONENT_MASK) >> | |
| IEEE80211_VHT_CAP_MAX_A_MPDU_LENGTH_EXPONENT_SHIFT; | |
| /* Workaround: Some Netgear/Linksys 11ac APs set Rx A-MPDU factor to | |
| * zero in VHT IE. Using it would result in degraded throughput. | |
| * arg->peer_max_mpdu at this point contains HT max_mpdu so keep | |
| * it if VHT max_mpdu is smaller. */ | |
| arg->peer_max_mpdu = max(arg->peer_max_mpdu, | |
| (1U << (IEEE80211_HT_MAX_AMPDU_FACTOR + | |
| ampdu_factor)) - 1); | |
| if (sta->bandwidth == IEEE80211_STA_RX_BW_80) | |
| arg->peer_flags |= WMI_PEER_80MHZ; | |
| arg->peer_vht_rates.rx_max_rate = | |
| __le16_to_cpu(vht_cap->vht_mcs.rx_highest); | |
| arg->peer_vht_rates.rx_mcs_set = | |
| __le16_to_cpu(vht_cap->vht_mcs.rx_mcs_map); | |
| arg->peer_vht_rates.tx_max_rate = | |
| __le16_to_cpu(vht_cap->vht_mcs.tx_highest); | |
| arg->peer_vht_rates.tx_mcs_set = ath10k_peer_assoc_h_vht_limit( | |
| __le16_to_cpu(vht_cap->vht_mcs.tx_mcs_map), vht_mcs_mask); | |
| ath10k_dbg(ar, ATH10K_DBG_MAC, "mac vht peer %pM max_mpdu %d flags 0x%x\n", | |
| sta->addr, arg->peer_max_mpdu, arg->peer_flags); | |
| } | |
| static void ath10k_peer_assoc_h_qos(struct ath10k *ar, | |
| struct ieee80211_vif *vif, | |
| struct ieee80211_sta *sta, | |
| struct wmi_peer_assoc_complete_arg *arg) | |
| { | |
| struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif); | |
| switch (arvif->vdev_type) { | |
| case WMI_VDEV_TYPE_AP: | |
| if (sta->wme) | |
| arg->peer_flags |= WMI_PEER_QOS; | |
| if (sta->wme && sta->uapsd_queues) { | |
| arg->peer_flags |= WMI_PEER_APSD; | |
| arg->peer_rate_caps |= WMI_RC_UAPSD_FLAG; | |
| } | |
| break; | |
| case WMI_VDEV_TYPE_STA: | |
| if (vif->bss_conf.qos) | |
| arg->peer_flags |= WMI_PEER_QOS; | |
| break; | |
| case WMI_VDEV_TYPE_IBSS: | |
| if (sta->wme) | |
| arg->peer_flags |= WMI_PEER_QOS; | |
| break; | |
| default: | |
| break; | |
| } | |
| ath10k_dbg(ar, ATH10K_DBG_MAC, "mac peer %pM qos %d\n", | |
| sta->addr, !!(arg->peer_flags & WMI_PEER_QOS)); | |
| } | |
| static bool ath10k_mac_sta_has_ofdm_only(struct ieee80211_sta *sta) | |
| { | |
| return sta->supp_rates[IEEE80211_BAND_2GHZ] >> | |
| ATH10K_MAC_FIRST_OFDM_RATE_IDX; | |
| } | |
| static void ath10k_peer_assoc_h_phymode(struct ath10k *ar, | |
| struct ieee80211_vif *vif, | |
| struct ieee80211_sta *sta, | |
| struct wmi_peer_assoc_complete_arg *arg) | |
| { | |
| struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif); | |
| struct cfg80211_chan_def def; | |
| enum ieee80211_band band; | |
| const u8 *ht_mcs_mask; | |
| const u16 *vht_mcs_mask; | |
| enum wmi_phy_mode phymode = MODE_UNKNOWN; | |
| if (WARN_ON(ath10k_mac_vif_chan(vif, &def))) | |
| return; | |
| band = def.chan->band; | |
| ht_mcs_mask = arvif->bitrate_mask.control[band].ht_mcs; | |
| vht_mcs_mask = arvif->bitrate_mask.control[band].vht_mcs; | |
| switch (band) { | |
| case IEEE80211_BAND_2GHZ: | |
| if (sta->vht_cap.vht_supported && | |
| !ath10k_peer_assoc_h_vht_masked(vht_mcs_mask)) { | |
| if (sta->bandwidth == IEEE80211_STA_RX_BW_40) | |
| phymode = MODE_11AC_VHT40; | |
| else | |
| phymode = MODE_11AC_VHT20; | |
| } else if (sta->ht_cap.ht_supported && | |
| !ath10k_peer_assoc_h_ht_masked(ht_mcs_mask)) { | |
| if (sta->bandwidth == IEEE80211_STA_RX_BW_40) | |
| phymode = MODE_11NG_HT40; | |
| else | |
| phymode = MODE_11NG_HT20; | |
| } else if (ath10k_mac_sta_has_ofdm_only(sta)) { | |
| phymode = MODE_11G; | |
| } else { | |
| phymode = MODE_11B; | |
| } | |
| break; | |
| case IEEE80211_BAND_5GHZ: | |
| /* | |
| * Check VHT first. | |
| */ | |
| if (sta->vht_cap.vht_supported && | |
| !ath10k_peer_assoc_h_vht_masked(vht_mcs_mask)) { | |
| if (sta->bandwidth == IEEE80211_STA_RX_BW_80) | |
| phymode = MODE_11AC_VHT80; | |
| else if (sta->bandwidth == IEEE80211_STA_RX_BW_40) | |
| phymode = MODE_11AC_VHT40; | |
| else if (sta->bandwidth == IEEE80211_STA_RX_BW_20) | |
| phymode = MODE_11AC_VHT20; | |
| } else if (sta->ht_cap.ht_supported && | |
| !ath10k_peer_assoc_h_ht_masked(ht_mcs_mask)) { | |
| if (sta->bandwidth >= IEEE80211_STA_RX_BW_40) | |
| phymode = MODE_11NA_HT40; | |
| else | |
| phymode = MODE_11NA_HT20; | |
| } else { | |
| phymode = MODE_11A; | |
| } | |
| break; | |
| default: | |
| break; | |
| } | |
| ath10k_dbg(ar, ATH10K_DBG_MAC, "mac peer %pM phymode %s\n", | |
| sta->addr, ath10k_wmi_phymode_str(phymode)); | |
| arg->peer_phymode = phymode; | |
| WARN_ON(phymode == MODE_UNKNOWN); | |
| } | |
| static int ath10k_peer_assoc_prepare(struct ath10k *ar, | |
| struct ieee80211_vif *vif, | |
| struct ieee80211_sta *sta, | |
| struct wmi_peer_assoc_complete_arg *arg) | |
| { | |
| lockdep_assert_held(&ar->conf_mutex); | |
| memset(arg, 0, sizeof(*arg)); | |
| ath10k_peer_assoc_h_basic(ar, vif, sta, arg); | |
| ath10k_peer_assoc_h_crypto(ar, vif, arg); | |
| ath10k_peer_assoc_h_rates(ar, vif, sta, arg); | |
| ath10k_peer_assoc_h_ht(ar, vif, sta, arg); | |
| ath10k_peer_assoc_h_vht(ar, vif, sta, arg); | |
| ath10k_peer_assoc_h_qos(ar, vif, sta, arg); | |
| ath10k_peer_assoc_h_phymode(ar, vif, sta, arg); | |
| return 0; | |
| } | |
| static const u32 ath10k_smps_map[] = { | |
| [WLAN_HT_CAP_SM_PS_STATIC] = WMI_PEER_SMPS_STATIC, | |
| [WLAN_HT_CAP_SM_PS_DYNAMIC] = WMI_PEER_SMPS_DYNAMIC, | |
| [WLAN_HT_CAP_SM_PS_INVALID] = WMI_PEER_SMPS_PS_NONE, | |
| [WLAN_HT_CAP_SM_PS_DISABLED] = WMI_PEER_SMPS_PS_NONE, | |
| }; | |
| static int ath10k_setup_peer_smps(struct ath10k *ar, struct ath10k_vif *arvif, | |
| const u8 *addr, | |
| const struct ieee80211_sta_ht_cap *ht_cap) | |
| { | |
| int smps; | |
| if (!ht_cap->ht_supported) | |
| return 0; | |
| smps = ht_cap->cap & IEEE80211_HT_CAP_SM_PS; | |
| smps >>= IEEE80211_HT_CAP_SM_PS_SHIFT; | |
| if (smps >= ARRAY_SIZE(ath10k_smps_map)) | |
| return -EINVAL; | |
| return ath10k_wmi_peer_set_param(ar, arvif->vdev_id, addr, | |
| WMI_PEER_SMPS_STATE, | |
| ath10k_smps_map[smps]); | |
| } | |
| static int ath10k_mac_vif_recalc_txbf(struct ath10k *ar, | |
| struct ieee80211_vif *vif, | |
| struct ieee80211_sta_vht_cap vht_cap) | |
| { | |
| struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif); | |
| int ret; | |
| u32 param; | |
| u32 value; | |
| if (ath10k_wmi_get_txbf_conf_scheme(ar) != WMI_TXBF_CONF_AFTER_ASSOC) | |
| return 0; | |
| if (!(ar->vht_cap_info & | |
| (IEEE80211_VHT_CAP_SU_BEAMFORMEE_CAPABLE | | |
| IEEE80211_VHT_CAP_MU_BEAMFORMEE_CAPABLE | | |
| IEEE80211_VHT_CAP_SU_BEAMFORMER_CAPABLE | | |
| IEEE80211_VHT_CAP_MU_BEAMFORMER_CAPABLE))) | |
| return 0; | |
| param = ar->wmi.vdev_param->txbf; | |
| value = 0; | |
| if (WARN_ON(param == WMI_VDEV_PARAM_UNSUPPORTED)) | |
| return 0; | |
| /* The following logic is correct. If a remote STA advertises support | |
| * for being a beamformer then we should enable us being a beamformee. | |
| */ | |
| if (ar->vht_cap_info & | |
| (IEEE80211_VHT_CAP_SU_BEAMFORMEE_CAPABLE | | |
| IEEE80211_VHT_CAP_MU_BEAMFORMEE_CAPABLE)) { | |
| if (vht_cap.cap & IEEE80211_VHT_CAP_SU_BEAMFORMER_CAPABLE) | |
| value |= WMI_VDEV_PARAM_TXBF_SU_TX_BFEE; | |
| if (vht_cap.cap & IEEE80211_VHT_CAP_MU_BEAMFORMER_CAPABLE) | |
| value |= WMI_VDEV_PARAM_TXBF_MU_TX_BFEE; | |
| } | |
| if (ar->vht_cap_info & | |
| (IEEE80211_VHT_CAP_SU_BEAMFORMER_CAPABLE | | |
| IEEE80211_VHT_CAP_MU_BEAMFORMER_CAPABLE)) { | |
| if (vht_cap.cap & IEEE80211_VHT_CAP_SU_BEAMFORMEE_CAPABLE) | |
| value |= WMI_VDEV_PARAM_TXBF_SU_TX_BFER; | |
| if (vht_cap.cap & IEEE80211_VHT_CAP_MU_BEAMFORMEE_CAPABLE) | |
| value |= WMI_VDEV_PARAM_TXBF_MU_TX_BFER; | |
| } | |
| if (value & WMI_VDEV_PARAM_TXBF_MU_TX_BFEE) | |
| value |= WMI_VDEV_PARAM_TXBF_SU_TX_BFEE; | |
| if (value & WMI_VDEV_PARAM_TXBF_MU_TX_BFER) | |
| value |= WMI_VDEV_PARAM_TXBF_SU_TX_BFER; | |
| ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id, param, value); | |
| if (ret) { | |
| ath10k_warn(ar, "failed to submit vdev param txbf 0x%x: %d\n", | |
| value, ret); | |
| return ret; | |
| } | |
| return 0; | |
| } | |
| /* can be called only in mac80211 callbacks due to `key_count` usage */ | |
| static void ath10k_bss_assoc(struct ieee80211_hw *hw, | |
| struct ieee80211_vif *vif, | |
| struct ieee80211_bss_conf *bss_conf) | |
| { | |
| struct ath10k *ar = hw->priv; | |
| struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif); | |
| struct ieee80211_sta_ht_cap ht_cap; | |
| struct ieee80211_sta_vht_cap vht_cap; | |
| struct wmi_peer_assoc_complete_arg peer_arg; | |
| struct ieee80211_sta *ap_sta; | |
| int ret; | |
| lockdep_assert_held(&ar->conf_mutex); | |
| ath10k_dbg(ar, ATH10K_DBG_MAC, "mac vdev %i assoc bssid %pM aid %d\n", | |
| arvif->vdev_id, arvif->bssid, arvif->aid); | |
| rcu_read_lock(); | |
| ap_sta = ieee80211_find_sta(vif, bss_conf->bssid); | |
| if (!ap_sta) { | |
| ath10k_warn(ar, "failed to find station entry for bss %pM vdev %i\n", | |
| bss_conf->bssid, arvif->vdev_id); | |
| rcu_read_unlock(); | |
| return; | |
| } | |
| /* ap_sta must be accessed only within rcu section which must be left | |
| * before calling ath10k_setup_peer_smps() which might sleep. */ | |
| ht_cap = ap_sta->ht_cap; | |
| vht_cap = ap_sta->vht_cap; | |
| ret = ath10k_peer_assoc_prepare(ar, vif, ap_sta, &peer_arg); | |
| if (ret) { | |
| ath10k_warn(ar, "failed to prepare peer assoc for %pM vdev %i: %d\n", | |
| bss_conf->bssid, arvif->vdev_id, ret); | |
| rcu_read_unlock(); | |
| return; | |
| } | |
| rcu_read_unlock(); | |
| ret = ath10k_wmi_peer_assoc(ar, &peer_arg); | |
| if (ret) { | |
| ath10k_warn(ar, "failed to run peer assoc for %pM vdev %i: %d\n", | |
| bss_conf->bssid, arvif->vdev_id, ret); | |
| return; | |
| } | |
| ret = ath10k_setup_peer_smps(ar, arvif, bss_conf->bssid, &ht_cap); | |
| if (ret) { | |
| ath10k_warn(ar, "failed to setup peer SMPS for vdev %i: %d\n", | |
| arvif->vdev_id, ret); | |
| return; | |
| } | |
| ret = ath10k_mac_vif_recalc_txbf(ar, vif, vht_cap); | |
| if (ret) { | |
| ath10k_warn(ar, "failed to recalc txbf for vdev %i on bss %pM: %d\n", | |
| arvif->vdev_id, bss_conf->bssid, ret); | |
| return; | |
| } | |
| ath10k_dbg(ar, ATH10K_DBG_MAC, | |
| "mac vdev %d up (associated) bssid %pM aid %d\n", | |
| arvif->vdev_id, bss_conf->bssid, bss_conf->aid); | |
| WARN_ON(arvif->is_up); | |
| arvif->aid = bss_conf->aid; | |
| ether_addr_copy(arvif->bssid, bss_conf->bssid); | |
| ret = ath10k_wmi_vdev_up(ar, arvif->vdev_id, arvif->aid, arvif->bssid); | |
| if (ret) { | |
| ath10k_warn(ar, "failed to set vdev %d up: %d\n", | |
| arvif->vdev_id, ret); | |
| return; | |
| } | |
| arvif->is_up = true; | |
| /* Workaround: Some firmware revisions (tested with qca6174 | |
| * WLAN.RM.2.0-00073) have buggy powersave state machine and must be | |
| * poked with peer param command. | |
| */ | |
| ret = ath10k_wmi_peer_set_param(ar, arvif->vdev_id, arvif->bssid, | |
| WMI_PEER_DUMMY_VAR, 1); | |
| if (ret) { | |
| ath10k_warn(ar, "failed to poke peer %pM param for ps workaround on vdev %i: %d\n", | |
| arvif->bssid, arvif->vdev_id, ret); | |
| return; | |
| } | |
| } | |
| static void ath10k_bss_disassoc(struct ieee80211_hw *hw, | |
| struct ieee80211_vif *vif) | |
| { | |
| struct ath10k *ar = hw->priv; | |
| struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif); | |
| struct ieee80211_sta_vht_cap vht_cap = {}; | |
| int ret; | |
| lockdep_assert_held(&ar->conf_mutex); | |
| ath10k_dbg(ar, ATH10K_DBG_MAC, "mac vdev %i disassoc bssid %pM\n", | |
| arvif->vdev_id, arvif->bssid); | |
| ret = ath10k_wmi_vdev_down(ar, arvif->vdev_id); | |
| if (ret) | |
| ath10k_warn(ar, "faield to down vdev %i: %d\n", | |
| arvif->vdev_id, ret); | |
| arvif->def_wep_key_idx = -1; | |
| ret = ath10k_mac_vif_recalc_txbf(ar, vif, vht_cap); | |
| if (ret) { | |
| ath10k_warn(ar, "failed to recalc txbf for vdev %i: %d\n", | |
| arvif->vdev_id, ret); | |
| return; | |
| } | |
| arvif->is_up = false; | |
| cancel_delayed_work_sync(&arvif->connection_loss_work); | |
| } | |
| static int ath10k_station_assoc(struct ath10k *ar, | |
| struct ieee80211_vif *vif, | |
| struct ieee80211_sta *sta, | |
| bool reassoc) | |
| { | |
| struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif); | |
| struct wmi_peer_assoc_complete_arg peer_arg; | |
| int ret = 0; | |
| lockdep_assert_held(&ar->conf_mutex); | |
| ret = ath10k_peer_assoc_prepare(ar, vif, sta, &peer_arg); | |
| if (ret) { | |
| ath10k_warn(ar, "failed to prepare WMI peer assoc for %pM vdev %i: %i\n", | |
| sta->addr, arvif->vdev_id, ret); | |
| return ret; | |
| } | |
| ret = ath10k_wmi_peer_assoc(ar, &peer_arg); | |
| if (ret) { | |
| ath10k_warn(ar, "failed to run peer assoc for STA %pM vdev %i: %d\n", | |
| sta->addr, arvif->vdev_id, ret); | |
| return ret; | |
| } | |
| /* Re-assoc is run only to update supported rates for given station. It | |
| * doesn't make much sense to reconfigure the peer completely. | |
| */ | |
| if (!reassoc) { | |
| ret = ath10k_setup_peer_smps(ar, arvif, sta->addr, | |
| &sta->ht_cap); | |
| if (ret) { | |
| ath10k_warn(ar, "failed to setup peer SMPS for vdev %d: %d\n", | |
| arvif->vdev_id, ret); | |
| return ret; | |
| } | |
| ret = ath10k_peer_assoc_qos_ap(ar, arvif, sta); | |
| if (ret) { | |
| ath10k_warn(ar, "failed to set qos params for STA %pM for vdev %i: %d\n", | |
| sta->addr, arvif->vdev_id, ret); | |
| return ret; | |
| } | |
| if (!sta->wme) { | |
| arvif->num_legacy_stations++; | |
| ret = ath10k_recalc_rtscts_prot(arvif); | |
| if (ret) { | |
| ath10k_warn(ar, "failed to recalculate rts/cts prot for vdev %d: %d\n", | |
| arvif->vdev_id, ret); | |
| return ret; | |
| } | |
| } | |
| /* Plumb cached keys only for static WEP */ | |
| if (arvif->def_wep_key_idx != -1) { | |
| ret = ath10k_install_peer_wep_keys(arvif, sta->addr); | |
| if (ret) { | |
| ath10k_warn(ar, "failed to install peer wep keys for vdev %i: %d\n", | |
| arvif->vdev_id, ret); | |
| return ret; | |
| } | |
| } | |
| } | |
| return ret; | |
| } | |
| static int ath10k_station_disassoc(struct ath10k *ar, | |
| struct ieee80211_vif *vif, | |
| struct ieee80211_sta *sta) | |
| { | |
| struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif); | |
| int ret = 0; | |
| lockdep_assert_held(&ar->conf_mutex); | |
| if (!sta->wme) { | |
| arvif->num_legacy_stations--; | |
| ret = ath10k_recalc_rtscts_prot(arvif); | |
| if (ret) { | |
| ath10k_warn(ar, "failed to recalculate rts/cts prot for vdev %d: %d\n", | |
| arvif->vdev_id, ret); | |
| return ret; | |
| } | |
| } | |
| ret = ath10k_clear_peer_keys(arvif, sta->addr); | |
| if (ret) { | |
| ath10k_warn(ar, "failed to clear all peer wep keys for vdev %i: %d\n", | |
| arvif->vdev_id, ret); | |
| return ret; | |
| } | |
| return ret; | |
| } | |
| /**************/ | |
| /* Regulatory */ | |
| /**************/ | |
| static int ath10k_update_channel_list(struct ath10k *ar) | |
| { | |
| struct ieee80211_hw *hw = ar->hw; | |
| struct ieee80211_supported_band **bands; | |
| enum ieee80211_band band; | |
| struct ieee80211_channel *channel; | |
| struct wmi_scan_chan_list_arg arg = {0}; | |
| struct wmi_channel_arg *ch; | |
| bool passive; | |
| int len; | |
| int ret; | |
| int i; | |
| lockdep_assert_held(&ar->conf_mutex); | |
| bands = hw->wiphy->bands; | |
| for (band = 0; band < IEEE80211_NUM_BANDS; band++) { | |
| if (!bands[band]) | |
| continue; | |
| for (i = 0; i < bands[band]->n_channels; i++) { | |
| if (bands[band]->channels[i].flags & | |
| IEEE80211_CHAN_DISABLED) | |
| continue; | |
| arg.n_channels++; | |
| } | |
| } | |
| len = sizeof(struct wmi_channel_arg) * arg.n_channels; | |
| arg.channels = kzalloc(len, GFP_KERNEL); | |
| if (!arg.channels) | |
| return -ENOMEM; | |
| ch = arg.channels; | |
| for (band = 0; band < IEEE80211_NUM_BANDS; band++) { | |
| if (!bands[band]) | |
| continue; | |
| for (i = 0; i < bands[band]->n_channels; i++) { | |
| channel = &bands[band]->channels[i]; | |
| if (channel->flags & IEEE80211_CHAN_DISABLED) | |
| continue; | |
| ch->allow_ht = true; | |
| /* FIXME: when should we really allow VHT? */ | |
| ch->allow_vht = true; | |
| ch->allow_ibss = | |
| !(channel->flags & IEEE80211_CHAN_NO_IR); | |
| ch->ht40plus = | |
| !(channel->flags & IEEE80211_CHAN_NO_HT40PLUS); | |
| ch->chan_radar = | |
| !!(channel->flags & IEEE80211_CHAN_RADAR); | |
| passive = channel->flags & IEEE80211_CHAN_NO_IR; | |
| ch->passive = passive; | |
| ch->freq = channel->center_freq; | |
| ch->band_center_freq1 = channel->center_freq; | |
| ch->min_power = 0; | |
| ch->max_power = channel->max_power * 2; | |
| ch->max_reg_power = channel->max_reg_power * 2; | |
| ch->max_antenna_gain = channel->max_antenna_gain * 2; | |
| ch->reg_class_id = 0; /* FIXME */ | |
| /* FIXME: why use only legacy modes, why not any | |
| * HT/VHT modes? Would that even make any | |
| * difference? */ | |
| if (channel->band == IEEE80211_BAND_2GHZ) | |
| ch->mode = MODE_11G; | |
| else | |
| ch->mode = MODE_11A; | |
| if (WARN_ON_ONCE(ch->mode == MODE_UNKNOWN)) | |
| continue; | |
| ath10k_dbg(ar, ATH10K_DBG_WMI, | |
| "mac channel [%zd/%d] freq %d maxpower %d regpower %d antenna %d mode %d\n", | |
| ch - arg.channels, arg.n_channels, | |
| ch->freq, ch->max_power, ch->max_reg_power, | |
| ch->max_antenna_gain, ch->mode); | |
| ch++; | |
| } | |
| } | |
| ret = ath10k_wmi_scan_chan_list(ar, &arg); | |
| kfree(arg.channels); | |
| return ret; | |
| } | |
| static enum wmi_dfs_region | |
| ath10k_mac_get_dfs_region(enum nl80211_dfs_regions dfs_region) | |
| { | |
| switch (dfs_region) { | |
| case NL80211_DFS_UNSET: | |
| return WMI_UNINIT_DFS_DOMAIN; | |
| case NL80211_DFS_FCC: | |
| return WMI_FCC_DFS_DOMAIN; | |
| case NL80211_DFS_ETSI: | |
| return WMI_ETSI_DFS_DOMAIN; | |
| case NL80211_DFS_JP: | |
| return WMI_MKK4_DFS_DOMAIN; | |
| } | |
| return WMI_UNINIT_DFS_DOMAIN; | |
| } | |
| static void ath10k_regd_update(struct ath10k *ar) | |
| { | |
| struct reg_dmn_pair_mapping *regpair; | |
| int ret; | |
| enum wmi_dfs_region wmi_dfs_reg; | |
| enum nl80211_dfs_regions nl_dfs_reg; | |
| lockdep_assert_held(&ar->conf_mutex); | |
| ret = ath10k_update_channel_list(ar); | |
| if (ret) | |
| ath10k_warn(ar, "failed to update channel list: %d\n", ret); | |
| regpair = ar->ath_common.regulatory.regpair; | |
| if (config_enabled(CONFIG_ATH10K_DFS_CERTIFIED) && ar->dfs_detector) { | |
| nl_dfs_reg = ar->dfs_detector->region; | |
| wmi_dfs_reg = ath10k_mac_get_dfs_region(nl_dfs_reg); | |
| } else { | |
| wmi_dfs_reg = WMI_UNINIT_DFS_DOMAIN; | |
| } | |
| /* Target allows setting up per-band regdomain but ath_common provides | |
| * a combined one only */ | |
| ret = ath10k_wmi_pdev_set_regdomain(ar, | |
| regpair->reg_domain, | |
| regpair->reg_domain, /* 2ghz */ | |
| regpair->reg_domain, /* 5ghz */ | |
| regpair->reg_2ghz_ctl, | |
| regpair->reg_5ghz_ctl, | |
| wmi_dfs_reg); | |
| if (ret) | |
| ath10k_warn(ar, "failed to set pdev regdomain: %d\n", ret); | |
| } | |
| static void ath10k_reg_notifier(struct wiphy *wiphy, | |
| struct regulatory_request *request) | |
| { | |
| struct ieee80211_hw *hw = wiphy_to_ieee80211_hw(wiphy); | |
| struct ath10k *ar = hw->priv; | |
| bool result; | |
| ath_reg_notifier_apply(wiphy, request, &ar->ath_common.regulatory); | |
| if (config_enabled(CONFIG_ATH10K_DFS_CERTIFIED) && ar->dfs_detector) { | |
| ath10k_dbg(ar, ATH10K_DBG_REGULATORY, "dfs region 0x%x\n", | |
| request->dfs_region); | |
| result = ar->dfs_detector->set_dfs_domain(ar->dfs_detector, | |
| request->dfs_region); | |
| if (!result) | |
| ath10k_warn(ar, "DFS region 0x%X not supported, will trigger radar for every pulse\n", | |
| request->dfs_region); | |
| } | |
| mutex_lock(&ar->conf_mutex); | |
| if (ar->state == ATH10K_STATE_ON) | |
| ath10k_regd_update(ar); | |
| mutex_unlock(&ar->conf_mutex); | |
| } | |
| /***************/ | |
| /* TX handlers */ | |
| /***************/ | |
| void ath10k_mac_tx_lock(struct ath10k *ar, int reason) | |
| { | |
| lockdep_assert_held(&ar->htt.tx_lock); | |
| WARN_ON(reason >= ATH10K_TX_PAUSE_MAX); | |
| ar->tx_paused |= BIT(reason); | |
| ieee80211_stop_queues(ar->hw); | |
| } | |
| static void ath10k_mac_tx_unlock_iter(void *data, u8 *mac, | |
| struct ieee80211_vif *vif) | |
| { | |
| struct ath10k *ar = data; | |
| struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif); | |
| if (arvif->tx_paused) | |
| return; | |
| ieee80211_wake_queue(ar->hw, arvif->vdev_id); | |
| } | |
| void ath10k_mac_tx_unlock(struct ath10k *ar, int reason) | |
| { | |
| lockdep_assert_held(&ar->htt.tx_lock); | |
| WARN_ON(reason >= ATH10K_TX_PAUSE_MAX); | |
| ar->tx_paused &= ~BIT(reason); | |
| if (ar->tx_paused) | |
| return; | |
| ieee80211_iterate_active_interfaces_atomic(ar->hw, | |
| IEEE80211_IFACE_ITER_RESUME_ALL, | |
| ath10k_mac_tx_unlock_iter, | |
| ar); | |
| ieee80211_wake_queue(ar->hw, ar->hw->offchannel_tx_hw_queue); | |
| } | |
| void ath10k_mac_vif_tx_lock(struct ath10k_vif *arvif, int reason) | |
| { | |
| struct ath10k *ar = arvif->ar; | |
| lockdep_assert_held(&ar->htt.tx_lock); | |
| WARN_ON(reason >= BITS_PER_LONG); | |
| arvif->tx_paused |= BIT(reason); | |
| ieee80211_stop_queue(ar->hw, arvif->vdev_id); | |
| } | |
| void ath10k_mac_vif_tx_unlock(struct ath10k_vif *arvif, int reason) | |
| { | |
| struct ath10k *ar = arvif->ar; | |
| lockdep_assert_held(&ar->htt.tx_lock); | |
| WARN_ON(reason >= BITS_PER_LONG); | |
| arvif->tx_paused &= ~BIT(reason); | |
| if (ar->tx_paused) | |
| return; | |
| if (arvif->tx_paused) | |
| return; | |
| ieee80211_wake_queue(ar->hw, arvif->vdev_id); | |
| } | |
| static void ath10k_mac_vif_handle_tx_pause(struct ath10k_vif *arvif, | |
| enum wmi_tlv_tx_pause_id pause_id, | |
| enum wmi_tlv_tx_pause_action action) | |
| { | |
| struct ath10k *ar = arvif->ar; | |
| lockdep_assert_held(&ar->htt.tx_lock); | |
| switch (action) { | |
| case WMI_TLV_TX_PAUSE_ACTION_STOP: | |
| ath10k_mac_vif_tx_lock(arvif, pause_id); | |
| break; | |
| case WMI_TLV_TX_PAUSE_ACTION_WAKE: | |
| ath10k_mac_vif_tx_unlock(arvif, pause_id); | |
| break; | |
| default: | |
| ath10k_warn(ar, "received unknown tx pause action %d on vdev %i, ignoring\n", | |
| action, arvif->vdev_id); | |
| break; | |
| } | |
| } | |
| struct ath10k_mac_tx_pause { | |
| u32 vdev_id; | |
| enum wmi_tlv_tx_pause_id pause_id; | |
| enum wmi_tlv_tx_pause_action action; | |
| }; | |
| static void ath10k_mac_handle_tx_pause_iter(void *data, u8 *mac, | |
| struct ieee80211_vif *vif) | |
| { | |
| struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif); | |
| struct ath10k_mac_tx_pause *arg = data; | |
| if (arvif->vdev_id != arg->vdev_id) | |
| return; | |
| ath10k_mac_vif_handle_tx_pause(arvif, arg->pause_id, arg->action); | |
| } | |
| void ath10k_mac_handle_tx_pause_vdev(struct ath10k *ar, u32 vdev_id, | |
| enum wmi_tlv_tx_pause_id pause_id, | |
| enum wmi_tlv_tx_pause_action action) | |
| { | |
| struct ath10k_mac_tx_pause arg = { | |
| .vdev_id = vdev_id, | |
| .pause_id = pause_id, | |
| .action = action, | |
| }; | |
| spin_lock_bh(&ar->htt.tx_lock); | |
| ieee80211_iterate_active_interfaces_atomic(ar->hw, | |
| IEEE80211_IFACE_ITER_RESUME_ALL, | |
| ath10k_mac_handle_tx_pause_iter, | |
| &arg); | |
| spin_unlock_bh(&ar->htt.tx_lock); | |
| } | |
| static u8 ath10k_tx_h_get_tid(struct ieee80211_hdr *hdr) | |
| { | |
| if (ieee80211_is_mgmt(hdr->frame_control)) | |
| return HTT_DATA_TX_EXT_TID_MGMT; | |
| if (!ieee80211_is_data_qos(hdr->frame_control)) | |
| return HTT_DATA_TX_EXT_TID_NON_QOS_MCAST_BCAST; | |
| if (!is_unicast_ether_addr(ieee80211_get_DA(hdr))) | |
| return HTT_DATA_TX_EXT_TID_NON_QOS_MCAST_BCAST; | |
| return ieee80211_get_qos_ctl(hdr)[0] & IEEE80211_QOS_CTL_TID_MASK; | |
| } | |
| static u8 ath10k_tx_h_get_vdev_id(struct ath10k *ar, struct ieee80211_vif *vif) | |
| { | |
| if (vif) | |
| return ath10k_vif_to_arvif(vif)->vdev_id; | |
| if (ar->monitor_started) | |
| return ar->monitor_vdev_id; | |
| ath10k_warn(ar, "failed to resolve vdev id\n"); | |
| return 0; | |
| } | |
| static enum ath10k_hw_txrx_mode | |
| ath10k_tx_h_get_txmode(struct ath10k *ar, struct ieee80211_vif *vif, | |
| struct ieee80211_sta *sta, struct sk_buff *skb) | |
| { | |
| const struct ieee80211_hdr *hdr = (void *)skb->data; | |
| __le16 fc = hdr->frame_control; | |
| if (!vif || vif->type == NL80211_IFTYPE_MONITOR) | |
| return ATH10K_HW_TXRX_RAW; | |
| if (ieee80211_is_mgmt(fc)) | |
| return ATH10K_HW_TXRX_MGMT; | |
| /* Workaround: | |
| * | |
| * NullFunc frames are mostly used to ping if a client or AP are still | |
| * reachable and responsive. This implies tx status reports must be | |
| * accurate - otherwise either mac80211 or userspace (e.g. hostapd) can | |
| * come to a conclusion that the other end disappeared and tear down | |
| * BSS connection or it can never disconnect from BSS/client (which is | |
| * the case). | |
| * | |
| * Firmware with HTT older than 3.0 delivers incorrect tx status for | |
| * NullFunc frames to driver. However there's a HTT Mgmt Tx command | |
| * which seems to deliver correct tx reports for NullFunc frames. The | |
| * downside of using it is it ignores client powersave state so it can | |
| * end up disconnecting sleeping clients in AP mode. It should fix STA | |
| * mode though because AP don't sleep. | |
| */ | |
| if (ar->htt.target_version_major < 3 && | |
| (ieee80211_is_nullfunc(fc) || ieee80211_is_qos_nullfunc(fc)) && | |
| !test_bit(ATH10K_FW_FEATURE_HAS_WMI_MGMT_TX, ar->fw_features)) | |
| return ATH10K_HW_TXRX_MGMT; | |
| /* Workaround: | |
| * | |
| * Some wmi-tlv firmwares for qca6174 have broken Tx key selection for | |
| * NativeWifi txmode - it selects AP key instead of peer key. It seems | |
| * to work with Ethernet txmode so use it. | |
| * | |
| * FIXME: Check if raw mode works with TDLS. | |
| */ | |
| if (ieee80211_is_data_present(fc) && sta && sta->tdls) | |
| return ATH10K_HW_TXRX_ETHERNET; | |
| if (test_bit(ATH10K_FLAG_RAW_MODE, &ar->dev_flags)) | |
| return ATH10K_HW_TXRX_RAW; | |
| return ATH10K_HW_TXRX_NATIVE_WIFI; | |
| } | |
| static bool ath10k_tx_h_use_hwcrypto(struct ieee80211_vif *vif, | |
| struct sk_buff *skb) { | |
| struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); | |
| const u32 mask = IEEE80211_TX_INTFL_DONT_ENCRYPT | | |
| IEEE80211_TX_CTL_INJECTED; | |
| if ((info->flags & mask) == mask) | |
| return false; | |
| if (vif) | |
| return !ath10k_vif_to_arvif(vif)->nohwcrypt; | |
| return true; | |
| } | |
| /* HTT Tx uses Native Wifi tx mode which expects 802.11 frames without QoS | |
| * Control in the header. | |
| */ | |
| static void ath10k_tx_h_nwifi(struct ieee80211_hw *hw, struct sk_buff *skb) | |
| { | |
| struct ieee80211_hdr *hdr = (void *)skb->data; | |
| struct ath10k_skb_cb *cb = ATH10K_SKB_CB(skb); | |
| u8 *qos_ctl; | |
| if (!ieee80211_is_data_qos(hdr->frame_control)) | |
| return; | |
| qos_ctl = ieee80211_get_qos_ctl(hdr); | |
| memmove(skb->data + IEEE80211_QOS_CTL_LEN, | |
| skb->data, (void *)qos_ctl - (void *)skb->data); | |
| skb_pull(skb, IEEE80211_QOS_CTL_LEN); | |
| /* Some firmware revisions don't handle sending QoS NullFunc well. | |
| * These frames are mainly used for CQM purposes so it doesn't really | |
| * matter whether QoS NullFunc or NullFunc are sent. | |
| */ | |
| hdr = (void *)skb->data; | |
| if (ieee80211_is_qos_nullfunc(hdr->frame_control)) | |
| cb->htt.tid = HTT_DATA_TX_EXT_TID_NON_QOS_MCAST_BCAST; | |
| hdr->frame_control &= ~__cpu_to_le16(IEEE80211_STYPE_QOS_DATA); | |
| } | |
| static void ath10k_tx_h_8023(struct sk_buff *skb) | |
| { | |
| struct ieee80211_hdr *hdr; | |
| struct rfc1042_hdr *rfc1042; | |
| struct ethhdr *eth; | |
| size_t hdrlen; | |
| u8 da[ETH_ALEN]; | |
| u8 sa[ETH_ALEN]; | |
| __be16 type; | |
| hdr = (void *)skb->data; | |
| hdrlen = ieee80211_hdrlen(hdr->frame_control); | |
| rfc1042 = (void *)skb->data + hdrlen; | |
| ether_addr_copy(da, ieee80211_get_DA(hdr)); | |
| ether_addr_copy(sa, ieee80211_get_SA(hdr)); | |
| type = rfc1042->snap_type; | |
| skb_pull(skb, hdrlen + sizeof(*rfc1042)); | |
| skb_push(skb, sizeof(*eth)); | |
| eth = (void *)skb->data; | |
| ether_addr_copy(eth->h_dest, da); | |
| ether_addr_copy(eth->h_source, sa); | |
| eth->h_proto = type; | |
| } | |
| static void ath10k_tx_h_add_p2p_noa_ie(struct ath10k *ar, | |
| struct ieee80211_vif *vif, | |
| struct sk_buff *skb) | |
| { | |
| struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data; | |
| struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif); | |
| /* This is case only for P2P_GO */ | |
| if (arvif->vdev_type != WMI_VDEV_TYPE_AP || | |
| arvif->vdev_subtype != WMI_VDEV_SUBTYPE_P2P_GO) | |
| return; | |
| if (unlikely(ieee80211_is_probe_resp(hdr->frame_control))) { | |
| spin_lock_bh(&ar->data_lock); | |
| if (arvif->u.ap.noa_data) | |
| if (!pskb_expand_head(skb, 0, arvif->u.ap.noa_len, | |
| GFP_ATOMIC)) | |
| memcpy(skb_put(skb, arvif->u.ap.noa_len), | |
| arvif->u.ap.noa_data, | |
| arvif->u.ap.noa_len); | |
| spin_unlock_bh(&ar->data_lock); | |
| } | |
| } | |
| static bool ath10k_mac_need_offchan_tx_work(struct ath10k *ar) | |
| { | |
| /* FIXME: Not really sure since when the behaviour changed. At some | |
| * point new firmware stopped requiring creation of peer entries for | |
| * offchannel tx (and actually creating them causes issues with wmi-htc | |
| * tx credit replenishment and reliability). Assuming it's at least 3.4 | |
| * because that's when the `freq` was introduced to TX_FRM HTT command. | |
| */ | |
| return !(ar->htt.target_version_major >= 3 && | |
| ar->htt.target_version_minor >= 4); | |
| } | |
| static int ath10k_mac_tx_wmi_mgmt(struct ath10k *ar, struct sk_buff *skb) | |
| { | |
| struct sk_buff_head *q = &ar->wmi_mgmt_tx_queue; | |
| int ret = 0; | |
| spin_lock_bh(&ar->data_lock); | |
| if (skb_queue_len(q) == ATH10K_MAX_NUM_MGMT_PENDING) { | |
| ath10k_warn(ar, "wmi mgmt tx queue is full\n"); | |
| ret = -ENOSPC; | |
| goto unlock; | |
| } | |
| __skb_queue_tail(q, skb); | |
| ieee80211_queue_work(ar->hw, &ar->wmi_mgmt_tx_work); | |
| unlock: | |
| spin_unlock_bh(&ar->data_lock); | |
| return ret; | |
| } | |
| static void ath10k_mac_tx(struct ath10k *ar, struct sk_buff *skb) | |
| { | |
| struct ath10k_skb_cb *cb = ATH10K_SKB_CB(skb); | |
| struct ath10k_htt *htt = &ar->htt; | |
| int ret = 0; | |
| switch (cb->txmode) { | |
| case ATH10K_HW_TXRX_RAW: | |
| case ATH10K_HW_TXRX_NATIVE_WIFI: | |
| case ATH10K_HW_TXRX_ETHERNET: | |
| ret = ath10k_htt_tx(htt, skb); | |
| break; | |
| case ATH10K_HW_TXRX_MGMT: | |
| if (test_bit(ATH10K_FW_FEATURE_HAS_WMI_MGMT_TX, | |
| ar->fw_features)) | |
| ret = ath10k_mac_tx_wmi_mgmt(ar, skb); | |
| else if (ar->htt.target_version_major >= 3) | |
| ret = ath10k_htt_tx(htt, skb); | |
| else | |
| ret = ath10k_htt_mgmt_tx(htt, skb); | |
| break; | |
| } | |
| if (ret) { | |
| ath10k_warn(ar, "failed to transmit packet, dropping: %d\n", | |
| ret); | |
| ieee80211_free_txskb(ar->hw, skb); | |
| } | |
| } | |
| void ath10k_offchan_tx_purge(struct ath10k *ar) | |
| { | |
| struct sk_buff *skb; | |
| for (;;) { | |
| skb = skb_dequeue(&ar->offchan_tx_queue); | |
| if (!skb) | |
| break; | |
| ieee80211_free_txskb(ar->hw, skb); | |
| } | |
| } | |
| void ath10k_offchan_tx_work(struct work_struct *work) | |
| { | |
| struct ath10k *ar = container_of(work, struct ath10k, offchan_tx_work); | |
| struct ath10k_peer *peer; | |
| struct ieee80211_hdr *hdr; | |
| struct sk_buff *skb; | |
| const u8 *peer_addr; | |
| int vdev_id; | |
| int ret; | |
| unsigned long time_left; | |
| bool tmp_peer_created = false; | |
| /* FW requirement: We must create a peer before FW will send out | |
| * an offchannel frame. Otherwise the frame will be stuck and | |
| * never transmitted. We delete the peer upon tx completion. | |
| * It is unlikely that a peer for offchannel tx will already be | |
| * present. However it may be in some rare cases so account for that. | |
| * Otherwise we might remove a legitimate peer and break stuff. */ | |
| for (;;) { | |
| skb = skb_dequeue(&ar->offchan_tx_queue); | |
| if (!skb) | |
| break; | |
| mutex_lock(&ar->conf_mutex); | |
| ath10k_dbg(ar, ATH10K_DBG_MAC, "mac offchannel skb %p\n", | |
| skb); | |
| hdr = (struct ieee80211_hdr *)skb->data; | |
| peer_addr = ieee80211_get_DA(hdr); | |
| vdev_id = ATH10K_SKB_CB(skb)->vdev_id; | |
| spin_lock_bh(&ar->data_lock); | |
| peer = ath10k_peer_find(ar, vdev_id, peer_addr); | |
| spin_unlock_bh(&ar->data_lock); | |
| if (peer) | |
| /* FIXME: should this use ath10k_warn()? */ | |
| ath10k_dbg(ar, ATH10K_DBG_MAC, "peer %pM on vdev %d already present\n", | |
| peer_addr, vdev_id); | |
| if (!peer) { | |
| ret = ath10k_peer_create(ar, vdev_id, peer_addr, | |
| WMI_PEER_TYPE_DEFAULT); | |
| if (ret) | |
| ath10k_warn(ar, "failed to create peer %pM on vdev %d: %d\n", | |
| peer_addr, vdev_id, ret); | |
| tmp_peer_created = (ret == 0); | |
| } | |
| spin_lock_bh(&ar->data_lock); | |
| reinit_completion(&ar->offchan_tx_completed); | |
| ar->offchan_tx_skb = skb; | |
| spin_unlock_bh(&ar->data_lock); | |
| ath10k_mac_tx(ar, skb); | |
| time_left = | |
| wait_for_completion_timeout(&ar->offchan_tx_completed, 3 * HZ); | |
| if (time_left == 0) | |
| ath10k_warn(ar, "timed out waiting for offchannel skb %p\n", | |
| skb); | |
| if (!peer && tmp_peer_created) { | |
| ret = ath10k_peer_delete(ar, vdev_id, peer_addr); | |
| if (ret) | |
| ath10k_warn(ar, "failed to delete peer %pM on vdev %d: %d\n", | |
| peer_addr, vdev_id, ret); | |
| } | |
| mutex_unlock(&ar->conf_mutex); | |
| } | |
| } | |
| void ath10k_mgmt_over_wmi_tx_purge(struct ath10k *ar) | |
| { | |
| struct sk_buff *skb; | |
| for (;;) { | |
| skb = skb_dequeue(&ar->wmi_mgmt_tx_queue); | |
| if (!skb) | |
| break; | |
| ieee80211_free_txskb(ar->hw, skb); | |
| } | |
| } | |
| void ath10k_mgmt_over_wmi_tx_work(struct work_struct *work) | |
| { | |
| struct ath10k *ar = container_of(work, struct ath10k, wmi_mgmt_tx_work); | |
| struct sk_buff *skb; | |
| int ret; | |
| for (;;) { | |
| skb = skb_dequeue(&ar->wmi_mgmt_tx_queue); | |
| if (!skb) | |
| break; | |
| ret = ath10k_wmi_mgmt_tx(ar, skb); | |
| if (ret) { | |
| ath10k_warn(ar, "failed to transmit management frame via WMI: %d\n", | |
| ret); | |
| ieee80211_free_txskb(ar->hw, skb); | |
| } | |
| } | |
| } | |
| /************/ | |
| /* Scanning */ | |
| /************/ | |
| void __ath10k_scan_finish(struct ath10k *ar) | |
| { | |
| lockdep_assert_held(&ar->data_lock); | |
| switch (ar->scan.state) { | |
| case ATH10K_SCAN_IDLE: | |
| break; | |
| case ATH10K_SCAN_RUNNING: | |
| case ATH10K_SCAN_ABORTING: | |
| if (!ar->scan.is_roc) | |
| ieee80211_scan_completed(ar->hw, | |
| (ar->scan.state == | |
| ATH10K_SCAN_ABORTING)); | |
| else if (ar->scan.roc_notify) | |
| ieee80211_remain_on_channel_expired(ar->hw); | |
| /* fall through */ | |
| case ATH10K_SCAN_STARTING: | |
| ar->scan.state = ATH10K_SCAN_IDLE; | |
| ar->scan_channel = NULL; | |
| ath10k_offchan_tx_purge(ar); | |
| cancel_delayed_work(&ar->scan.timeout); | |
| complete_all(&ar->scan.completed); | |
| break; | |
| } | |
| } | |
| void ath10k_scan_finish(struct ath10k *ar) | |
| { | |
| spin_lock_bh(&ar->data_lock); | |
| __ath10k_scan_finish(ar); | |
| spin_unlock_bh(&ar->data_lock); | |
| } | |
| static int ath10k_scan_stop(struct ath10k *ar) | |
| { | |
| struct wmi_stop_scan_arg arg = { | |
| .req_id = 1, /* FIXME */ | |
| .req_type = WMI_SCAN_STOP_ONE, | |
| .u.scan_id = ATH10K_SCAN_ID, | |
| }; | |
| int ret; | |
| lockdep_assert_held(&ar->conf_mutex); | |
| ret = ath10k_wmi_stop_scan(ar, &arg); | |
| if (ret) { | |
| ath10k_warn(ar, "failed to stop wmi scan: %d\n", ret); | |
| goto out; | |
| } | |
| ret = wait_for_completion_timeout(&ar->scan.completed, 3*HZ); | |
| if (ret == 0) { | |
| ath10k_warn(ar, "failed to receive scan abortion completion: timed out\n"); | |
| ret = -ETIMEDOUT; | |
| } else if (ret > 0) { | |
| ret = 0; | |
| } | |
| out: | |
| /* Scan state should be updated upon scan completion but in case | |
| * firmware fails to deliver the event (for whatever reason) it is | |
| * desired to clean up scan state anyway. Firmware may have just | |
| * dropped the scan completion event delivery due to transport pipe | |
| * being overflown with data and/or it can recover on its own before | |
| * next scan request is submitted. | |
| */ | |
| spin_lock_bh(&ar->data_lock); | |
| if (ar->scan.state != ATH10K_SCAN_IDLE) | |
| __ath10k_scan_finish(ar); | |
| spin_unlock_bh(&ar->data_lock); | |
| return ret; | |
| } | |
| static void ath10k_scan_abort(struct ath10k *ar) | |
| { | |
| int ret; | |
| lockdep_assert_held(&ar->conf_mutex); | |
| spin_lock_bh(&ar->data_lock); | |
| switch (ar->scan.state) { | |
| case ATH10K_SCAN_IDLE: | |
| /* This can happen if timeout worker kicked in and called | |
| * abortion while scan completion was being processed. | |
| */ | |
| break; | |
| case ATH10K_SCAN_STARTING: | |
| case ATH10K_SCAN_ABORTING: | |
| ath10k_warn(ar, "refusing scan abortion due to invalid scan state: %s (%d)\n", | |
| ath10k_scan_state_str(ar->scan.state), | |
| ar->scan.state); | |
| break; | |
| case ATH10K_SCAN_RUNNING: | |
| ar->scan.state = ATH10K_SCAN_ABORTING; | |
| spin_unlock_bh(&ar->data_lock); | |
| ret = ath10k_scan_stop(ar); | |
| if (ret) | |
| ath10k_warn(ar, "failed to abort scan: %d\n", ret); | |
| spin_lock_bh(&ar->data_lock); | |
| break; | |
| } | |
| spin_unlock_bh(&ar->data_lock); | |
| } | |
| void ath10k_scan_timeout_work(struct work_struct *work) | |
| { | |
| struct ath10k *ar = container_of(work, struct ath10k, | |
| scan.timeout.work); | |
| mutex_lock(&ar->conf_mutex); | |
| ath10k_scan_abort(ar); | |
| mutex_unlock(&ar->conf_mutex); | |
| } | |
| static int ath10k_start_scan(struct ath10k *ar, | |
| const struct wmi_start_scan_arg *arg) | |
| { | |
| int ret; | |
| lockdep_assert_held(&ar->conf_mutex); | |
| ret = ath10k_wmi_start_scan(ar, arg); | |
| if (ret) | |
| return ret; | |
| ret = wait_for_completion_timeout(&ar->scan.started, 1*HZ); | |
| if (ret == 0) { | |
| ret = ath10k_scan_stop(ar); | |
| if (ret) | |
| ath10k_warn(ar, "failed to stop scan: %d\n", ret); | |
| return -ETIMEDOUT; | |
| } | |
| /* If we failed to start the scan, return error code at | |
| * this point. This is probably due to some issue in the | |
| * firmware, but no need to wedge the driver due to that... | |
| */ | |
| spin_lock_bh(&ar->data_lock); | |
| if (ar->scan.state == ATH10K_SCAN_IDLE) { | |
| spin_unlock_bh(&ar->data_lock); | |
| return -EINVAL; | |
| } | |
| spin_unlock_bh(&ar->data_lock); | |
| return 0; | |
| } | |
| /**********************/ | |
| /* mac80211 callbacks */ | |
| /**********************/ | |
| static void ath10k_tx(struct ieee80211_hw *hw, | |
| struct ieee80211_tx_control *control, | |
| struct sk_buff *skb) | |
| { | |
| struct ath10k *ar = hw->priv; | |
| struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); | |
| struct ieee80211_vif *vif = info->control.vif; | |
| struct ieee80211_sta *sta = control->sta; | |
| struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data; | |
| __le16 fc = hdr->frame_control; | |
| /* We should disable CCK RATE due to P2P */ | |
| if (info->flags & IEEE80211_TX_CTL_NO_CCK_RATE) | |
| ath10k_dbg(ar, ATH10K_DBG_MAC, "IEEE80211_TX_CTL_NO_CCK_RATE\n"); | |
| ATH10K_SKB_CB(skb)->htt.is_offchan = false; | |
| ATH10K_SKB_CB(skb)->htt.freq = 0; | |
| ATH10K_SKB_CB(skb)->htt.tid = ath10k_tx_h_get_tid(hdr); | |
| ATH10K_SKB_CB(skb)->htt.nohwcrypt = !ath10k_tx_h_use_hwcrypto(vif, skb); | |
| ATH10K_SKB_CB(skb)->vdev_id = ath10k_tx_h_get_vdev_id(ar, vif); | |
| ATH10K_SKB_CB(skb)->txmode = ath10k_tx_h_get_txmode(ar, vif, sta, skb); | |
| ATH10K_SKB_CB(skb)->is_protected = ieee80211_has_protected(fc); | |
| switch (ATH10K_SKB_CB(skb)->txmode) { | |
| case ATH10K_HW_TXRX_MGMT: | |
| case ATH10K_HW_TXRX_NATIVE_WIFI: | |
| ath10k_tx_h_nwifi(hw, skb); | |
| ath10k_tx_h_add_p2p_noa_ie(ar, vif, skb); | |
| ath10k_tx_h_seq_no(vif, skb); | |
| break; | |
| case ATH10K_HW_TXRX_ETHERNET: | |
| ath10k_tx_h_8023(skb); | |
| break; | |
| case ATH10K_HW_TXRX_RAW: | |
| if (!test_bit(ATH10K_FLAG_RAW_MODE, &ar->dev_flags)) { | |
| WARN_ON_ONCE(1); | |
| ieee80211_free_txskb(hw, skb); | |
| return; | |
| } | |
| } | |
| if (info->flags & IEEE80211_TX_CTL_TX_OFFCHAN) { | |
| spin_lock_bh(&ar->data_lock); | |
| ATH10K_SKB_CB(skb)->htt.freq = ar->scan.roc_freq; | |
| ATH10K_SKB_CB(skb)->vdev_id = ar->scan.vdev_id; | |
| spin_unlock_bh(&ar->data_lock); | |
| if (ath10k_mac_need_offchan_tx_work(ar)) { | |
| ATH10K_SKB_CB(skb)->htt.freq = 0; | |
| ATH10K_SKB_CB(skb)->htt.is_offchan = true; | |
| ath10k_dbg(ar, ATH10K_DBG_MAC, "queued offchannel skb %p\n", | |
| skb); | |
| skb_queue_tail(&ar->offchan_tx_queue, skb); | |
| ieee80211_queue_work(hw, &ar->offchan_tx_work); | |
| return; | |
| } | |
| } | |
| ath10k_mac_tx(ar, skb); | |
| } | |
| /* Must not be called with conf_mutex held as workers can use that also. */ | |
| void ath10k_drain_tx(struct ath10k *ar) | |
| { | |
| /* make sure rcu-protected mac80211 tx path itself is drained */ | |
| synchronize_net(); | |
| ath10k_offchan_tx_purge(ar); | |
| ath10k_mgmt_over_wmi_tx_purge(ar); | |
| cancel_work_sync(&ar->offchan_tx_work); | |
| cancel_work_sync(&ar->wmi_mgmt_tx_work); | |
| } | |
| void ath10k_halt(struct ath10k *ar) | |
| { | |
| struct ath10k_vif *arvif; | |
| lockdep_assert_held(&ar->conf_mutex); | |
| clear_bit(ATH10K_CAC_RUNNING, &ar->dev_flags); | |
| ar->filter_flags = 0; | |
| ar->monitor = false; | |
| ar->monitor_arvif = NULL; | |
| if (ar->monitor_started) | |
| ath10k_monitor_stop(ar); | |
| ar->monitor_started = false; | |
| ar->tx_paused = 0; | |
| ath10k_scan_finish(ar); | |
| ath10k_peer_cleanup_all(ar); | |
| ath10k_core_stop(ar); | |
| ath10k_hif_power_down(ar); | |
| spin_lock_bh(&ar->data_lock); | |
| list_for_each_entry(arvif, &ar->arvifs, list) | |
| ath10k_mac_vif_beacon_cleanup(arvif); | |
| spin_unlock_bh(&ar->data_lock); | |
| } | |
| static int ath10k_get_antenna(struct ieee80211_hw *hw, u32 *tx_ant, u32 *rx_ant) | |
| { | |
| struct ath10k *ar = hw->priv; | |
| mutex_lock(&ar->conf_mutex); | |
| *tx_ant = ar->cfg_tx_chainmask; | |
| *rx_ant = ar->cfg_rx_chainmask; | |
| mutex_unlock(&ar->conf_mutex); | |
| return 0; | |
| } | |
| static void ath10k_check_chain_mask(struct ath10k *ar, u32 cm, const char *dbg) | |
| { | |
| /* It is not clear that allowing gaps in chainmask | |
| * is helpful. Probably it will not do what user | |
| * is hoping for, so warn in that case. | |
| */ | |
| if (cm == 15 || cm == 7 || cm == 3 || cm == 1 || cm == 0) | |
| return; | |
| ath10k_warn(ar, "mac %s antenna chainmask may be invalid: 0x%x. Suggested values: 15, 7, 3, 1 or 0.\n", | |
| dbg, cm); | |
| } | |
| static int ath10k_mac_get_vht_cap_bf_sts(struct ath10k *ar) | |
| { | |
| int nsts = ar->vht_cap_info; | |
| nsts &= IEEE80211_VHT_CAP_BEAMFORMEE_STS_MASK; | |
| nsts >>= IEEE80211_VHT_CAP_BEAMFORMEE_STS_SHIFT; | |
| /* If firmware does not deliver to host number of space-time | |
| * streams supported, assume it support up to 4 BF STS and return | |
| * the value for VHT CAP: nsts-1) | |
| */ | |
| if (nsts == 0) | |
| return 3; | |
| return nsts; | |
| } | |
| static int ath10k_mac_get_vht_cap_bf_sound_dim(struct ath10k *ar) | |
| { | |
| int sound_dim = ar->vht_cap_info; | |
| sound_dim &= IEEE80211_VHT_CAP_SOUNDING_DIMENSIONS_MASK; | |
| sound_dim >>= IEEE80211_VHT_CAP_SOUNDING_DIMENSIONS_SHIFT; | |
| /* If the sounding dimension is not advertised by the firmware, | |
| * let's use a default value of 1 | |
| */ | |
| if (sound_dim == 0) | |
| return 1; | |
| return sound_dim; | |
| } | |
| static struct ieee80211_sta_vht_cap ath10k_create_vht_cap(struct ath10k *ar) | |
| { | |
| struct ieee80211_sta_vht_cap vht_cap = {0}; | |
| u16 mcs_map; | |
| u32 val; | |
| int i; | |
| vht_cap.vht_supported = 1; | |
| vht_cap.cap = ar->vht_cap_info; | |
| if (ar->vht_cap_info & (IEEE80211_VHT_CAP_SU_BEAMFORMEE_CAPABLE | | |
| IEEE80211_VHT_CAP_MU_BEAMFORMEE_CAPABLE)) { | |
| val = ath10k_mac_get_vht_cap_bf_sts(ar); | |
| val <<= IEEE80211_VHT_CAP_BEAMFORMEE_STS_SHIFT; | |
| val &= IEEE80211_VHT_CAP_BEAMFORMEE_STS_MASK; | |
| vht_cap.cap |= val; | |
| } | |
| if (ar->vht_cap_info & (IEEE80211_VHT_CAP_SU_BEAMFORMER_CAPABLE | | |
| IEEE80211_VHT_CAP_MU_BEAMFORMER_CAPABLE)) { | |
| val = ath10k_mac_get_vht_cap_bf_sound_dim(ar); | |
| val <<= IEEE80211_VHT_CAP_SOUNDING_DIMENSIONS_SHIFT; | |
| val &= IEEE80211_VHT_CAP_SOUNDING_DIMENSIONS_MASK; | |
| vht_cap.cap |= val; | |
| } | |
| mcs_map = 0; | |
| for (i = 0; i < 8; i++) { | |
| if ((i < ar->num_rf_chains) && (ar->cfg_tx_chainmask & BIT(i))) | |
| mcs_map |= IEEE80211_VHT_MCS_SUPPORT_0_9 << (i * 2); | |
| else | |
| mcs_map |= IEEE80211_VHT_MCS_NOT_SUPPORTED << (i * 2); | |
| } | |
| vht_cap.vht_mcs.rx_mcs_map = cpu_to_le16(mcs_map); | |
| vht_cap.vht_mcs.tx_mcs_map = cpu_to_le16(mcs_map); | |
| return vht_cap; | |
| } | |
| static struct ieee80211_sta_ht_cap ath10k_get_ht_cap(struct ath10k *ar) | |
| { | |
| int i; | |
| struct ieee80211_sta_ht_cap ht_cap = {0}; | |
| if (!(ar->ht_cap_info & WMI_HT_CAP_ENABLED)) | |
| return ht_cap; | |
| ht_cap.ht_supported = 1; | |
| ht_cap.ampdu_factor = IEEE80211_HT_MAX_AMPDU_64K; | |
| ht_cap.ampdu_density = IEEE80211_HT_MPDU_DENSITY_8; | |
| ht_cap.cap |= IEEE80211_HT_CAP_SUP_WIDTH_20_40; | |
| ht_cap.cap |= IEEE80211_HT_CAP_DSSSCCK40; | |
| ht_cap.cap |= WLAN_HT_CAP_SM_PS_STATIC << IEEE80211_HT_CAP_SM_PS_SHIFT; | |
| if (ar->ht_cap_info & WMI_HT_CAP_HT20_SGI) | |
| ht_cap.cap |= IEEE80211_HT_CAP_SGI_20; | |
| if (ar->ht_cap_info & WMI_HT_CAP_HT40_SGI) | |
| ht_cap.cap |= IEEE80211_HT_CAP_SGI_40; | |
| if (ar->ht_cap_info & WMI_HT_CAP_DYNAMIC_SMPS) { | |
| u32 smps; | |
| smps = WLAN_HT_CAP_SM_PS_DYNAMIC; | |
| smps <<= IEEE80211_HT_CAP_SM_PS_SHIFT; | |
| ht_cap.cap |= smps; | |
| } | |
| if (ar->ht_cap_info & WMI_HT_CAP_TX_STBC) | |
| ht_cap.cap |= IEEE80211_HT_CAP_TX_STBC; | |
| if (ar->ht_cap_info & WMI_HT_CAP_RX_STBC) { | |
| u32 stbc; | |
| stbc = ar->ht_cap_info; | |
| stbc &= WMI_HT_CAP_RX_STBC; | |
| stbc >>= WMI_HT_CAP_RX_STBC_MASK_SHIFT; | |
| stbc <<= IEEE80211_HT_CAP_RX_STBC_SHIFT; | |
| stbc &= IEEE80211_HT_CAP_RX_STBC; | |
| ht_cap.cap |= stbc; | |
| } | |
| if (ar->ht_cap_info & WMI_HT_CAP_LDPC) | |
| ht_cap.cap |= IEEE80211_HT_CAP_LDPC_CODING; | |
| if (ar->ht_cap_info & WMI_HT_CAP_L_SIG_TXOP_PROT) | |
| ht_cap.cap |= IEEE80211_HT_CAP_LSIG_TXOP_PROT; | |
| /* max AMSDU is implicitly taken from vht_cap_info */ | |
| if (ar->vht_cap_info & WMI_VHT_CAP_MAX_MPDU_LEN_MASK) | |
| ht_cap.cap |= IEEE80211_HT_CAP_MAX_AMSDU; | |
| for (i = 0; i < ar->num_rf_chains; i++) { | |
| if (ar->cfg_rx_chainmask & BIT(i)) | |
| ht_cap.mcs.rx_mask[i] = 0xFF; | |
| } | |
| ht_cap.mcs.tx_params |= IEEE80211_HT_MCS_TX_DEFINED; | |
| return ht_cap; | |
| } | |
| static void ath10k_mac_setup_ht_vht_cap(struct ath10k *ar) | |
| { | |
| struct ieee80211_supported_band *band; | |
| struct ieee80211_sta_vht_cap vht_cap; | |
| struct ieee80211_sta_ht_cap ht_cap; | |
| ht_cap = ath10k_get_ht_cap(ar); | |
| vht_cap = ath10k_create_vht_cap(ar); | |
| if (ar->phy_capability & WHAL_WLAN_11G_CAPABILITY) { | |
| band = &ar->mac.sbands[IEEE80211_BAND_2GHZ]; | |
| band->ht_cap = ht_cap; | |
| /* Enable the VHT support at 2.4 GHz */ | |
| band->vht_cap = vht_cap; | |
| } | |
| if (ar->phy_capability & WHAL_WLAN_11A_CAPABILITY) { | |
| band = &ar->mac.sbands[IEEE80211_BAND_5GHZ]; | |
| band->ht_cap = ht_cap; | |
| band->vht_cap = vht_cap; | |
| } | |
| } | |
| static int __ath10k_set_antenna(struct ath10k *ar, u32 tx_ant, u32 rx_ant) | |
| { | |
| int ret; | |
| lockdep_assert_held(&ar->conf_mutex); | |
| ath10k_check_chain_mask(ar, tx_ant, "tx"); | |
| ath10k_check_chain_mask(ar, rx_ant, "rx"); | |
| ar->cfg_tx_chainmask = tx_ant; | |
| ar->cfg_rx_chainmask = rx_ant; | |
| if ((ar->state != ATH10K_STATE_ON) && | |
| (ar->state != ATH10K_STATE_RESTARTED)) | |
| return 0; | |
| ret = ath10k_wmi_pdev_set_param(ar, ar->wmi.pdev_param->tx_chain_mask, | |
| tx_ant); | |
| if (ret) { | |
| ath10k_warn(ar, "failed to set tx-chainmask: %d, req 0x%x\n", | |
| ret, tx_ant); | |
| return ret; | |
| } | |
| ret = ath10k_wmi_pdev_set_param(ar, ar->wmi.pdev_param->rx_chain_mask, | |
| rx_ant); | |
| if (ret) { | |
| ath10k_warn(ar, "failed to set rx-chainmask: %d, req 0x%x\n", | |
| ret, rx_ant); | |
| return ret; | |
| } | |
| /* Reload HT/VHT capability */ | |
| ath10k_mac_setup_ht_vht_cap(ar); | |
| return 0; | |
| } | |
| static int ath10k_set_antenna(struct ieee80211_hw *hw, u32 tx_ant, u32 rx_ant) | |
| { | |
| struct ath10k *ar = hw->priv; | |
| int ret; | |
| mutex_lock(&ar->conf_mutex); | |
| ret = __ath10k_set_antenna(ar, tx_ant, rx_ant); | |
| mutex_unlock(&ar->conf_mutex); | |
| return ret; | |
| } | |
| static int ath10k_start(struct ieee80211_hw *hw) | |
| { | |
| struct ath10k *ar = hw->priv; | |
| u32 burst_enable; | |
| int ret = 0; | |
| /* | |
| * This makes sense only when restarting hw. It is harmless to call | |
| * uncoditionally. This is necessary to make sure no HTT/WMI tx | |
| * commands will be submitted while restarting. | |
| */ | |
| ath10k_drain_tx(ar); | |
| mutex_lock(&ar->conf_mutex); | |
| switch (ar->state) { | |
| case ATH10K_STATE_OFF: | |
| ar->state = ATH10K_STATE_ON; | |
| break; | |
| case ATH10K_STATE_RESTARTING: | |
| ath10k_halt(ar); | |
| ar->state = ATH10K_STATE_RESTARTED; | |
| break; | |
| case ATH10K_STATE_ON: | |
| case ATH10K_STATE_RESTARTED: | |
| case ATH10K_STATE_WEDGED: | |
| WARN_ON(1); | |
| ret = -EINVAL; | |
| goto err; | |
| case ATH10K_STATE_UTF: | |
| ret = -EBUSY; | |
| goto err; | |
| } | |
| ret = ath10k_hif_power_up(ar); | |
| if (ret) { | |
| ath10k_err(ar, "Could not init hif: %d\n", ret); | |
| goto err_off; | |
| } | |
| ret = ath10k_core_start(ar, ATH10K_FIRMWARE_MODE_NORMAL); | |
| if (ret) { | |
| ath10k_err(ar, "Could not init core: %d\n", ret); | |
| goto err_power_down; | |
| } | |
| ret = ath10k_wmi_pdev_set_param(ar, ar->wmi.pdev_param->pmf_qos, 1); | |
| if (ret) { | |
| ath10k_warn(ar, "failed to enable PMF QOS: %d\n", ret); | |
| goto err_core_stop; | |
| } | |
| ret = ath10k_wmi_pdev_set_param(ar, ar->wmi.pdev_param->dynamic_bw, 1); | |
| if (ret) { | |
| ath10k_warn(ar, "failed to enable dynamic BW: %d\n", ret); | |
| goto err_core_stop; | |
| } | |
| if (test_bit(WMI_SERVICE_ADAPTIVE_OCS, ar->wmi.svc_map)) { | |
| ret = ath10k_wmi_adaptive_qcs(ar, true); | |
| if (ret) { | |
| ath10k_warn(ar, "failed to enable adaptive qcs: %d\n", | |
| ret); | |
| goto err_core_stop; | |
| } | |
| } | |
| if (test_bit(WMI_SERVICE_BURST, ar->wmi.svc_map)) { | |
| burst_enable = ar->wmi.pdev_param->burst_enable; | |
| ret = ath10k_wmi_pdev_set_param(ar, burst_enable, 0); | |
| if (ret) { | |
| ath10k_warn(ar, "failed to disable burst: %d\n", ret); | |
| goto err_core_stop; | |
| } | |
| } | |
| __ath10k_set_antenna(ar, ar->cfg_tx_chainmask, ar->cfg_rx_chainmask); | |
| /* | |
| * By default FW set ARP frames ac to voice (6). In that case ARP | |
| * exchange is not working properly for UAPSD enabled AP. ARP requests | |
| * which arrives with access category 0 are processed by network stack | |
| * and send back with access category 0, but FW changes access category | |
| * to 6. Set ARP frames access category to best effort (0) solves | |
| * this problem. | |
| */ | |
| ret = ath10k_wmi_pdev_set_param(ar, | |
| ar->wmi.pdev_param->arp_ac_override, 0); | |
| if (ret) { | |
| ath10k_warn(ar, "failed to set arp ac override parameter: %d\n", | |
| ret); | |
| goto err_core_stop; | |
| } | |
| if (test_bit(ATH10K_FW_FEATURE_SUPPORTS_ADAPTIVE_CCA, | |
| ar->fw_features)) { | |
| ret = ath10k_wmi_pdev_enable_adaptive_cca(ar, 1, | |
| WMI_CCA_DETECT_LEVEL_AUTO, | |
| WMI_CCA_DETECT_MARGIN_AUTO); | |
| if (ret) { | |
| ath10k_warn(ar, "failed to enable adaptive cca: %d\n", | |
| ret); | |
| goto err_core_stop; | |
| } | |
| } | |
| ret = ath10k_wmi_pdev_set_param(ar, | |
| ar->wmi.pdev_param->ani_enable, 1); | |
| if (ret) { | |
| ath10k_warn(ar, "failed to enable ani by default: %d\n", | |
| ret); | |
| goto err_core_stop; | |
| } | |
| ar->ani_enabled = true; | |
| ar->num_started_vdevs = 0; | |
| ath10k_regd_update(ar); | |
| ath10k_spectral_start(ar); | |
| ath10k_thermal_set_throttling(ar); | |
| mutex_unlock(&ar->conf_mutex); | |
| return 0; | |
| err_core_stop: | |
| ath10k_core_stop(ar); | |
| err_power_down: | |
| ath10k_hif_power_down(ar); | |
| err_off: | |
| ar->state = ATH10K_STATE_OFF; | |
| err: | |
| mutex_unlock(&ar->conf_mutex); | |
| return ret; | |
| } | |
| static void ath10k_stop(struct ieee80211_hw *hw) | |
| { | |
| struct ath10k *ar = hw->priv; | |
| ath10k_drain_tx(ar); | |
| mutex_lock(&ar->conf_mutex); | |
| if (ar->state != ATH10K_STATE_OFF) { | |
| ath10k_halt(ar); | |
| ar->state = ATH10K_STATE_OFF; | |
| } | |
| mutex_unlock(&ar->conf_mutex); | |
| cancel_delayed_work_sync(&ar->scan.timeout); | |
| cancel_work_sync(&ar->restart_work); | |
| } | |
| static int ath10k_config_ps(struct ath10k *ar) | |
| { | |
| struct ath10k_vif *arvif; | |
| int ret = 0; | |
| lockdep_assert_held(&ar->conf_mutex); | |
| list_for_each_entry(arvif, &ar->arvifs, list) { | |
| ret = ath10k_mac_vif_setup_ps(arvif); | |
| if (ret) { | |
| ath10k_warn(ar, "failed to setup powersave: %d\n", ret); | |
| break; | |
| } | |
| } | |
| return ret; | |
| } | |
| static int ath10k_mac_txpower_setup(struct ath10k *ar, int txpower) | |
| { | |
| int ret; | |
| u32 param; | |
| lockdep_assert_held(&ar->conf_mutex); | |
| ath10k_dbg(ar, ATH10K_DBG_MAC, "mac txpower %d\n", txpower); | |
| param = ar->wmi.pdev_param->txpower_limit2g; | |
| ret = ath10k_wmi_pdev_set_param(ar, param, txpower * 2); | |
| if (ret) { | |
| ath10k_warn(ar, "failed to set 2g txpower %d: %d\n", | |
| txpower, ret); | |
| return ret; | |
| } | |
| param = ar->wmi.pdev_param->txpower_limit5g; | |
| ret = ath10k_wmi_pdev_set_param(ar, param, txpower * 2); | |
| if (ret) { | |
| ath10k_warn(ar, "failed to set 5g txpower %d: %d\n", | |
| txpower, ret); | |
| return ret; | |
| } | |
| return 0; | |
| } | |
| static int ath10k_mac_txpower_recalc(struct ath10k *ar) | |
| { | |
| struct ath10k_vif *arvif; | |
| int ret, txpower = -1; | |
| lockdep_assert_held(&ar->conf_mutex); | |
| list_for_each_entry(arvif, &ar->arvifs, list) { | |
| WARN_ON(arvif->txpower < 0); | |
| if (txpower == -1) | |
| txpower = arvif->txpower; | |
| else | |
| txpower = min(txpower, arvif->txpower); | |
| } | |
| if (WARN_ON(txpower == -1)) | |
| return -EINVAL; | |
| ret = ath10k_mac_txpower_setup(ar, txpower); | |
| if (ret) { | |
| ath10k_warn(ar, "failed to setup tx power %d: %d\n", | |
| txpower, ret); | |
| return ret; | |
| } | |
| return 0; | |
| } | |
| static int ath10k_config(struct ieee80211_hw *hw, u32 changed) | |
| { | |
| struct ath10k *ar = hw->priv; | |
| struct ieee80211_conf *conf = &hw->conf; | |
| int ret = 0; | |
| mutex_lock(&ar->conf_mutex); | |
| if (changed & IEEE80211_CONF_CHANGE_PS) | |
| ath10k_config_ps(ar); | |
| if (changed & IEEE80211_CONF_CHANGE_MONITOR) { | |
| ar->monitor = conf->flags & IEEE80211_CONF_MONITOR; | |
| ret = ath10k_monitor_recalc(ar); | |
| if (ret) | |
| ath10k_warn(ar, "failed to recalc monitor: %d\n", ret); | |
| } | |
| mutex_unlock(&ar->conf_mutex); | |
| return ret; | |
| } | |
| static u32 get_nss_from_chainmask(u16 chain_mask) | |
| { | |
| if ((chain_mask & 0xf) == 0xf) | |
| return 4; | |
| else if ((chain_mask & 0x7) == 0x7) | |
| return 3; | |
| else if ((chain_mask & 0x3) == 0x3) | |
| return 2; | |
| return 1; | |
| } | |
| static int ath10k_mac_set_txbf_conf(struct ath10k_vif *arvif) | |
| { | |
| u32 value = 0; | |
| struct ath10k *ar = arvif->ar; | |
| int nsts; | |
| int sound_dim; | |
| if (ath10k_wmi_get_txbf_conf_scheme(ar) != WMI_TXBF_CONF_BEFORE_ASSOC) | |
| return 0; | |
| nsts = ath10k_mac_get_vht_cap_bf_sts(ar); | |
| if (ar->vht_cap_info & (IEEE80211_VHT_CAP_SU_BEAMFORMEE_CAPABLE | | |
| IEEE80211_VHT_CAP_MU_BEAMFORMEE_CAPABLE)) | |
| value |= SM(nsts, WMI_TXBF_STS_CAP_OFFSET); | |
| sound_dim = ath10k_mac_get_vht_cap_bf_sound_dim(ar); | |
| if (ar->vht_cap_info & (IEEE80211_VHT_CAP_SU_BEAMFORMER_CAPABLE | | |
| IEEE80211_VHT_CAP_MU_BEAMFORMER_CAPABLE)) | |
| value |= SM(sound_dim, WMI_BF_SOUND_DIM_OFFSET); | |
| if (!value) | |
| return 0; | |
| if (ar->vht_cap_info & IEEE80211_VHT_CAP_SU_BEAMFORMER_CAPABLE) | |
| value |= WMI_VDEV_PARAM_TXBF_SU_TX_BFER; | |
| if (ar->vht_cap_info & IEEE80211_VHT_CAP_MU_BEAMFORMER_CAPABLE) | |
| value |= (WMI_VDEV_PARAM_TXBF_MU_TX_BFER | | |
| WMI_VDEV_PARAM_TXBF_SU_TX_BFER); | |
| if (ar->vht_cap_info & IEEE80211_VHT_CAP_SU_BEAMFORMEE_CAPABLE) | |
| value |= WMI_VDEV_PARAM_TXBF_SU_TX_BFEE; | |
| if (ar->vht_cap_info & IEEE80211_VHT_CAP_MU_BEAMFORMEE_CAPABLE) | |
| value |= (WMI_VDEV_PARAM_TXBF_MU_TX_BFEE | | |
| WMI_VDEV_PARAM_TXBF_SU_TX_BFEE); | |
| return ath10k_wmi_vdev_set_param(ar, arvif->vdev_id, | |
| ar->wmi.vdev_param->txbf, value); | |
| } | |
| /* | |
| * TODO: | |
| * Figure out how to handle WMI_VDEV_SUBTYPE_P2P_DEVICE, | |
| * because we will send mgmt frames without CCK. This requirement | |
| * for P2P_FIND/GO_NEG should be handled by checking CCK flag | |
| * in the TX packet. | |
| */ | |
| static int ath10k_add_interface(struct ieee80211_hw *hw, | |
| struct ieee80211_vif *vif) | |
| { | |
| struct ath10k *ar = hw->priv; | |
| struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif); | |
| enum wmi_sta_powersave_param param; | |
| int ret = 0; | |
| u32 value; | |
| int bit; | |
| int i; | |
| u32 vdev_param; | |
| vif->driver_flags |= IEEE80211_VIF_SUPPORTS_UAPSD; | |
| mutex_lock(&ar->conf_mutex); | |
| memset(arvif, 0, sizeof(*arvif)); | |
| arvif->ar = ar; | |
| arvif->vif = vif; | |
| INIT_LIST_HEAD(&arvif->list); | |
| INIT_WORK(&arvif->ap_csa_work, ath10k_mac_vif_ap_csa_work); | |
| INIT_DELAYED_WORK(&arvif->connection_loss_work, | |
| ath10k_mac_vif_sta_connection_loss_work); | |
| for (i = 0; i < ARRAY_SIZE(arvif->bitrate_mask.control); i++) { | |
| arvif->bitrate_mask.control[i].legacy = 0xffffffff; | |
| memset(arvif->bitrate_mask.control[i].ht_mcs, 0xff, | |
| sizeof(arvif->bitrate_mask.control[i].ht_mcs)); | |
| memset(arvif->bitrate_mask.control[i].vht_mcs, 0xff, | |
| sizeof(arvif->bitrate_mask.control[i].vht_mcs)); | |
| } | |
| if (ar->num_peers >= ar->max_num_peers) { | |
| ath10k_warn(ar, "refusing vdev creation due to insufficient peer entry resources in firmware\n"); | |
| ret = -ENOBUFS; | |
| goto err; | |
| } | |
| if (ar->free_vdev_map == 0) { | |
| ath10k_warn(ar, "Free vdev map is empty, no more interfaces allowed.\n"); | |
| ret = -EBUSY; | |
| goto err; | |
| } | |
| bit = __ffs64(ar->free_vdev_map); | |
| ath10k_dbg(ar, ATH10K_DBG_MAC, "mac create vdev %i map %llx\n", | |
| bit, ar->free_vdev_map); | |
| arvif->vdev_id = bit; | |
| arvif->vdev_subtype = WMI_VDEV_SUBTYPE_NONE; | |
| switch (vif->type) { | |
| case NL80211_IFTYPE_P2P_DEVICE: | |
| arvif->vdev_type = WMI_VDEV_TYPE_STA; | |
| arvif->vdev_subtype = WMI_VDEV_SUBTYPE_P2P_DEVICE; | |
| break; | |
| case NL80211_IFTYPE_UNSPECIFIED: | |
| case NL80211_IFTYPE_STATION: | |
| arvif->vdev_type = WMI_VDEV_TYPE_STA; | |
| if (vif->p2p) | |
| arvif->vdev_subtype = WMI_VDEV_SUBTYPE_P2P_CLIENT; | |
| break; | |
| case NL80211_IFTYPE_ADHOC: | |
| arvif->vdev_type = WMI_VDEV_TYPE_IBSS; | |
| break; | |
| case NL80211_IFTYPE_MESH_POINT: | |
| if (!test_bit(ATH10K_FLAG_RAW_MODE, &ar->dev_flags)) { | |
| ret = -EINVAL; | |
| ath10k_warn(ar, "must load driver with rawmode=1 to add mesh interfaces\n"); | |
| goto err; | |
| } | |
| arvif->vdev_type = WMI_VDEV_TYPE_AP; | |
| break; | |
| case NL80211_IFTYPE_AP: | |
| arvif->vdev_type = WMI_VDEV_TYPE_AP; | |
| if (vif->p2p) | |
| arvif->vdev_subtype = WMI_VDEV_SUBTYPE_P2P_GO; | |
| break; | |
| case NL80211_IFTYPE_MONITOR: | |
| arvif->vdev_type = WMI_VDEV_TYPE_MONITOR; | |
| break; | |
| default: | |
| WARN_ON(1); | |
| break; | |
| } | |
| /* Using vdev_id as queue number will make it very easy to do per-vif | |
| * tx queue locking. This shouldn't wrap due to interface combinations | |
| * but do a modulo for correctness sake and prevent using offchannel tx | |
| * queues for regular vif tx. | |
| */ | |
| vif->cab_queue = arvif->vdev_id % (IEEE80211_MAX_QUEUES - 1); | |
| for (i = 0; i < ARRAY_SIZE(vif->hw_queue); i++) | |
| vif->hw_queue[i] = arvif->vdev_id % (IEEE80211_MAX_QUEUES - 1); | |
| /* Some firmware revisions don't wait for beacon tx completion before | |
| * sending another SWBA event. This could lead to hardware using old | |
| * (freed) beacon data in some cases, e.g. tx credit starvation | |
| * combined with missed TBTT. This is very very rare. | |
| * | |
| * On non-IOMMU-enabled hosts this could be a possible security issue | |
| * because hw could beacon some random data on the air. On | |
| * IOMMU-enabled hosts DMAR faults would occur in most cases and target | |
| * device would crash. | |
| * | |
| * Since there are no beacon tx completions (implicit nor explicit) | |
| * propagated to host the only workaround for this is to allocate a | |
| * DMA-coherent buffer for a lifetime of a vif and use it for all | |
| * beacon tx commands. Worst case for this approach is some beacons may | |
| * become corrupted, e.g. have garbled IEs or out-of-date TIM bitmap. | |
| */ | |
| if (vif->type == NL80211_IFTYPE_ADHOC || | |
| vif->type == NL80211_IFTYPE_MESH_POINT || | |
| vif->type == NL80211_IFTYPE_AP) { | |
| arvif->beacon_buf = dma_zalloc_coherent(ar->dev, | |
| IEEE80211_MAX_FRAME_LEN, | |
| &arvif->beacon_paddr, | |
| GFP_ATOMIC); | |
| if (!arvif->beacon_buf) { | |
| ret = -ENOMEM; | |
| ath10k_warn(ar, "failed to allocate beacon buffer: %d\n", | |
| ret); | |
| goto err; | |
| } | |
| } | |
| if (test_bit(ATH10K_FLAG_HW_CRYPTO_DISABLED, &ar->dev_flags)) | |
| arvif->nohwcrypt = true; | |
| if (arvif->nohwcrypt && | |
| !test_bit(ATH10K_FLAG_RAW_MODE, &ar->dev_flags)) { | |
| ath10k_warn(ar, "cryptmode module param needed for sw crypto\n"); | |
| goto err; | |
| } | |
| ath10k_dbg(ar, ATH10K_DBG_MAC, "mac vdev create %d (add interface) type %d subtype %d bcnmode %s\n", | |
| arvif->vdev_id, arvif->vdev_type, arvif->vdev_subtype, | |
| arvif->beacon_buf ? "single-buf" : "per-skb"); | |
| ret = ath10k_wmi_vdev_create(ar, arvif->vdev_id, arvif->vdev_type, | |
| arvif->vdev_subtype, vif->addr); | |
| if (ret) { | |
| ath10k_warn(ar, "failed to create WMI vdev %i: %d\n", | |
| arvif->vdev_id, ret); | |
| goto err; | |
| } | |
| ar->free_vdev_map &= ~(1LL << arvif->vdev_id); | |
| list_add(&arvif->list, &ar->arvifs); | |
| /* It makes no sense to have firmware do keepalives. mac80211 already | |
| * takes care of this with idle connection polling. | |
| */ | |
| ret = ath10k_mac_vif_disable_keepalive(arvif); | |
| if (ret) { | |
| ath10k_warn(ar, "failed to disable keepalive on vdev %i: %d\n", | |
| arvif->vdev_id, ret); | |
| goto err_vdev_delete; | |
| } | |
| arvif->def_wep_key_idx = -1; | |
| vdev_param = ar->wmi.vdev_param->tx_encap_type; | |
| ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id, vdev_param, | |
| ATH10K_HW_TXRX_NATIVE_WIFI); | |
| /* 10.X firmware does not support this VDEV parameter. Do not warn */ | |
| if (ret && ret != -EOPNOTSUPP) { | |
| ath10k_warn(ar, "failed to set vdev %i TX encapsulation: %d\n", | |
| arvif->vdev_id, ret); | |
| goto err_vdev_delete; | |
| } | |
| if (ar->cfg_tx_chainmask) { | |
| u16 nss = get_nss_from_chainmask(ar->cfg_tx_chainmask); | |
| vdev_param = ar->wmi.vdev_param->nss; | |
| ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id, vdev_param, | |
| nss); | |
| if (ret) { | |
| ath10k_warn(ar, "failed to set vdev %i chainmask 0x%x, nss %i: %d\n", | |
| arvif->vdev_id, ar->cfg_tx_chainmask, nss, | |
| ret); | |
| goto err_vdev_delete; | |
| } | |
| } | |
| if (arvif->vdev_type == WMI_VDEV_TYPE_AP || | |
| arvif->vdev_type == WMI_VDEV_TYPE_IBSS) { | |
| ret = ath10k_peer_create(ar, arvif->vdev_id, vif->addr, | |
| WMI_PEER_TYPE_DEFAULT); | |
| if (ret) { | |
| ath10k_warn(ar, "failed to create vdev %i peer for AP/IBSS: %d\n", | |
| arvif->vdev_id, ret); | |
| goto err_vdev_delete; | |
| } | |
| } | |
| if (arvif->vdev_type == WMI_VDEV_TYPE_AP) { | |
| ret = ath10k_mac_set_kickout(arvif); | |
| if (ret) { | |
| ath10k_warn(ar, "failed to set vdev %i kickout parameters: %d\n", | |
| arvif->vdev_id, ret); | |
| goto err_peer_delete; | |
| } | |
| } | |
| if (arvif->vdev_type == WMI_VDEV_TYPE_STA) { | |
| param = WMI_STA_PS_PARAM_RX_WAKE_POLICY; | |
| value = WMI_STA_PS_RX_WAKE_POLICY_WAKE; | |
| ret = ath10k_wmi_set_sta_ps_param(ar, arvif->vdev_id, | |
| param, value); | |
| if (ret) { | |
| ath10k_warn(ar, "failed to set vdev %i RX wake policy: %d\n", | |
| arvif->vdev_id, ret); | |
| goto err_peer_delete; | |
| } | |
| ret = ath10k_mac_vif_recalc_ps_wake_threshold(arvif); | |
| if (ret) { | |
| ath10k_warn(ar, "failed to recalc ps wake threshold on vdev %i: %d\n", | |
| arvif->vdev_id, ret); | |
| goto err_peer_delete; | |
| } | |
| ret = ath10k_mac_vif_recalc_ps_poll_count(arvif); | |
| if (ret) { | |
| ath10k_warn(ar, "failed to recalc ps poll count on vdev %i: %d\n", | |
| arvif->vdev_id, ret); | |
| goto err_peer_delete; | |
| } | |
| } | |
| ret = ath10k_mac_set_txbf_conf(arvif); | |
| if (ret) { | |
| ath10k_warn(ar, "failed to set txbf for vdev %d: %d\n", | |
| arvif->vdev_id, ret); | |
| goto err_peer_delete; | |
| } | |
| ret = ath10k_mac_set_rts(arvif, ar->hw->wiphy->rts_threshold); | |
| if (ret) { | |
| ath10k_warn(ar, "failed to set rts threshold for vdev %d: %d\n", | |
| arvif->vdev_id, ret); | |
| goto err_peer_delete; | |
| } | |
| arvif->txpower = vif->bss_conf.txpower; | |
| ret = ath10k_mac_txpower_recalc(ar); | |
| if (ret) { | |
| ath10k_warn(ar, "failed to recalc tx power: %d\n", ret); | |
| goto err_peer_delete; | |
| } | |
| if (vif->type == NL80211_IFTYPE_MONITOR) { | |
| ar->monitor_arvif = arvif; | |
| ret = ath10k_monitor_recalc(ar); | |
| if (ret) { | |
| ath10k_warn(ar, "failed to recalc monitor: %d\n", ret); | |
| goto err_peer_delete; | |
| } | |
| } | |
| spin_lock_bh(&ar->htt.tx_lock); | |
| if (!ar->tx_paused) | |
| ieee80211_wake_queue(ar->hw, arvif->vdev_id); | |
| spin_unlock_bh(&ar->htt.tx_lock); | |
| mutex_unlock(&ar->conf_mutex); | |
| return 0; | |
| err_peer_delete: | |
| if (arvif->vdev_type == WMI_VDEV_TYPE_AP || | |
| arvif->vdev_type == WMI_VDEV_TYPE_IBSS) | |
| ath10k_wmi_peer_delete(ar, arvif->vdev_id, vif->addr); | |
| err_vdev_delete: | |
| ath10k_wmi_vdev_delete(ar, arvif->vdev_id); | |
| ar->free_vdev_map |= 1LL << arvif->vdev_id; | |
| list_del(&arvif->list); | |
| err: | |
| if (arvif->beacon_buf) { | |
| dma_free_coherent(ar->dev, IEEE80211_MAX_FRAME_LEN, | |
| arvif->beacon_buf, arvif->beacon_paddr); | |
| arvif->beacon_buf = NULL; | |
| } | |
| mutex_unlock(&ar->conf_mutex); | |
| return ret; | |
| } | |
| static void ath10k_mac_vif_tx_unlock_all(struct ath10k_vif *arvif) | |
| { | |
| int i; | |
| for (i = 0; i < BITS_PER_LONG; i++) | |
| ath10k_mac_vif_tx_unlock(arvif, i); | |
| } | |
| static void ath10k_remove_interface(struct ieee80211_hw *hw, | |
| struct ieee80211_vif *vif) | |
| { | |
| struct ath10k *ar = hw->priv; | |
| struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif); | |
| int ret; | |
| cancel_work_sync(&arvif->ap_csa_work); | |
| cancel_delayed_work_sync(&arvif->connection_loss_work); | |
| mutex_lock(&ar->conf_mutex); | |
| spin_lock_bh(&ar->data_lock); | |
| ath10k_mac_vif_beacon_cleanup(arvif); | |
| spin_unlock_bh(&ar->data_lock); | |
| ret = ath10k_spectral_vif_stop(arvif); | |
| if (ret) | |
| ath10k_warn(ar, "failed to stop spectral for vdev %i: %d\n", | |
| arvif->vdev_id, ret); | |
| ar->free_vdev_map |= 1LL << arvif->vdev_id; | |
| list_del(&arvif->list); | |
| if (arvif->vdev_type == WMI_VDEV_TYPE_AP || | |
| arvif->vdev_type == WMI_VDEV_TYPE_IBSS) { | |
| ret = ath10k_wmi_peer_delete(arvif->ar, arvif->vdev_id, | |
| vif->addr); | |
| if (ret) | |
| ath10k_warn(ar, "failed to submit AP/IBSS self-peer removal on vdev %i: %d\n", | |
| arvif->vdev_id, ret); | |
| kfree(arvif->u.ap.noa_data); | |
| } | |
| ath10k_dbg(ar, ATH10K_DBG_MAC, "mac vdev %i delete (remove interface)\n", | |
| arvif->vdev_id); | |
| ret = ath10k_wmi_vdev_delete(ar, arvif->vdev_id); | |
| if (ret) | |
| ath10k_warn(ar, "failed to delete WMI vdev %i: %d\n", | |
| arvif->vdev_id, ret); | |
| /* Some firmware revisions don't notify host about self-peer removal | |
| * until after associated vdev is deleted. | |
| */ | |
| if (arvif->vdev_type == WMI_VDEV_TYPE_AP || | |
| arvif->vdev_type == WMI_VDEV_TYPE_IBSS) { | |
| ret = ath10k_wait_for_peer_deleted(ar, arvif->vdev_id, | |
| vif->addr); | |
| if (ret) | |
| ath10k_warn(ar, "failed to remove AP self-peer on vdev %i: %d\n", | |
| arvif->vdev_id, ret); | |
| spin_lock_bh(&ar->data_lock); | |
| ar->num_peers--; | |
| spin_unlock_bh(&ar->data_lock); | |
| } | |
| ath10k_peer_cleanup(ar, arvif->vdev_id); | |
| if (vif->type == NL80211_IFTYPE_MONITOR) { | |
| ar->monitor_arvif = NULL; | |
| ret = ath10k_monitor_recalc(ar); | |
| if (ret) | |
| ath10k_warn(ar, "failed to recalc monitor: %d\n", ret); | |
| } | |
| spin_lock_bh(&ar->htt.tx_lock); | |
| ath10k_mac_vif_tx_unlock_all(arvif); | |
| spin_unlock_bh(&ar->htt.tx_lock); | |
| mutex_unlock(&ar->conf_mutex); | |
| } | |
| /* | |
| * FIXME: Has to be verified. | |
| */ | |
| #define SUPPORTED_FILTERS \ | |
| (FIF_ALLMULTI | \ | |
| FIF_CONTROL | \ | |
| FIF_PSPOLL | \ | |
| FIF_OTHER_BSS | \ | |
| FIF_BCN_PRBRESP_PROMISC | \ | |
| FIF_PROBE_REQ | \ | |
| FIF_FCSFAIL) | |
| static void ath10k_configure_filter(struct ieee80211_hw *hw, | |
| unsigned int changed_flags, | |
| unsigned int *total_flags, | |
| u64 multicast) | |
| { | |
| struct ath10k *ar = hw->priv; | |
| int ret; | |
| mutex_lock(&ar->conf_mutex); | |
| changed_flags &= SUPPORTED_FILTERS; | |
| *total_flags &= SUPPORTED_FILTERS; | |
| ar->filter_flags = *total_flags; | |
| ret = ath10k_monitor_recalc(ar); | |
| if (ret) | |
| ath10k_warn(ar, "failed to recalc montior: %d\n", ret); | |
| mutex_unlock(&ar->conf_mutex); | |
| } | |
| static void ath10k_bss_info_changed(struct ieee80211_hw *hw, | |
| struct ieee80211_vif *vif, | |
| struct ieee80211_bss_conf *info, | |
| u32 changed) | |
| { | |
| struct ath10k *ar = hw->priv; | |
| struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif); | |
| int ret = 0; | |
| u32 vdev_param, pdev_param, slottime, preamble; | |
| mutex_lock(&ar->conf_mutex); | |
| if (changed & BSS_CHANGED_IBSS) | |
| ath10k_control_ibss(arvif, info, vif->addr); | |
| if (changed & BSS_CHANGED_BEACON_INT) { | |
| arvif->beacon_interval = info->beacon_int; | |
| vdev_param = ar->wmi.vdev_param->beacon_interval; | |
| ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id, vdev_param, | |
| arvif->beacon_interval); | |
| ath10k_dbg(ar, ATH10K_DBG_MAC, | |
| "mac vdev %d beacon_interval %d\n", | |
| arvif->vdev_id, arvif->beacon_interval); | |
| if (ret) | |
| ath10k_warn(ar, "failed to set beacon interval for vdev %d: %i\n", | |
| arvif->vdev_id, ret); | |
| } | |
| if (changed & BSS_CHANGED_BEACON) { | |
| ath10k_dbg(ar, ATH10K_DBG_MAC, | |
| "vdev %d set beacon tx mode to staggered\n", | |
| arvif->vdev_id); | |
| pdev_param = ar->wmi.pdev_param->beacon_tx_mode; | |
| ret = ath10k_wmi_pdev_set_param(ar, pdev_param, | |
| WMI_BEACON_STAGGERED_MODE); | |
| if (ret) | |
| ath10k_warn(ar, "failed to set beacon mode for vdev %d: %i\n", | |
| arvif->vdev_id, ret); | |
| ret = ath10k_mac_setup_bcn_tmpl(arvif); | |
| if (ret) | |
| ath10k_warn(ar, "failed to update beacon template: %d\n", | |
| ret); | |
| if (ieee80211_vif_is_mesh(vif)) { | |
| /* mesh doesn't use SSID but firmware needs it */ | |
| strncpy(arvif->u.ap.ssid, "mesh", | |
| sizeof(arvif->u.ap.ssid)); | |
| arvif->u.ap.ssid_len = 4; | |
| } | |
| } | |
| if (changed & BSS_CHANGED_AP_PROBE_RESP) { | |
| ret = ath10k_mac_setup_prb_tmpl(arvif); | |
| if (ret) | |
| ath10k_warn(ar, "failed to setup probe resp template on vdev %i: %d\n", | |
| arvif->vdev_id, ret); | |
| } | |
| if (changed & (BSS_CHANGED_BEACON_INFO | BSS_CHANGED_BEACON)) { | |
| arvif->dtim_period = info->dtim_period; | |
| ath10k_dbg(ar, ATH10K_DBG_MAC, | |
| "mac vdev %d dtim_period %d\n", | |
| arvif->vdev_id, arvif->dtim_period); | |
| vdev_param = ar->wmi.vdev_param->dtim_period; | |
| ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id, vdev_param, | |
| arvif->dtim_period); | |
| if (ret) | |
| ath10k_warn(ar, "failed to set dtim period for vdev %d: %i\n", | |
| arvif->vdev_id, ret); | |
| } | |
| if (changed & BSS_CHANGED_SSID && | |
| vif->type == NL80211_IFTYPE_AP) { | |
| arvif->u.ap.ssid_len = info->ssid_len; | |
| if (info->ssid_len) | |
| memcpy(arvif->u.ap.ssid, info->ssid, info->ssid_len); | |
| arvif->u.ap.hidden_ssid = info->hidden_ssid; | |
| } | |
| if (changed & BSS_CHANGED_BSSID && !is_zero_ether_addr(info->bssid)) | |
| ether_addr_copy(arvif->bssid, info->bssid); | |
| if (changed & BSS_CHANGED_BEACON_ENABLED) | |
| ath10k_control_beaconing(arvif, info); | |
| if (changed & BSS_CHANGED_ERP_CTS_PROT) { | |
| arvif->use_cts_prot = info->use_cts_prot; | |
| ath10k_dbg(ar, ATH10K_DBG_MAC, "mac vdev %d cts_prot %d\n", | |
| arvif->vdev_id, info->use_cts_prot); | |
| ret = ath10k_recalc_rtscts_prot(arvif); | |
| if (ret) | |
| ath10k_warn(ar, "failed to recalculate rts/cts prot for vdev %d: %d\n", | |
| arvif->vdev_id, ret); | |
| vdev_param = ar->wmi.vdev_param->protection_mode; | |
| ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id, vdev_param, | |
| info->use_cts_prot ? 1 : 0); | |
| if (ret) | |
| ath10k_warn(ar, "failed to set protection mode %d on vdev %i: %d\n", | |
| info->use_cts_prot, arvif->vdev_id, ret); | |
| } | |
| if (changed & BSS_CHANGED_ERP_SLOT) { | |
| if (info->use_short_slot) | |
| slottime = WMI_VDEV_SLOT_TIME_SHORT; /* 9us */ | |
| else | |
| slottime = WMI_VDEV_SLOT_TIME_LONG; /* 20us */ | |
| ath10k_dbg(ar, ATH10K_DBG_MAC, "mac vdev %d slot_time %d\n", | |
| arvif->vdev_id, slottime); | |
| vdev_param = ar->wmi.vdev_param->slot_time; | |
| ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id, vdev_param, | |
| slottime); | |
| if (ret) | |
| ath10k_warn(ar, "failed to set erp slot for vdev %d: %i\n", | |
| arvif->vdev_id, ret); | |
| } | |
| if (changed & BSS_CHANGED_ERP_PREAMBLE) { | |
| if (info->use_short_preamble) | |
| preamble = WMI_VDEV_PREAMBLE_SHORT; | |
| else | |
| preamble = WMI_VDEV_PREAMBLE_LONG; | |
| ath10k_dbg(ar, ATH10K_DBG_MAC, | |
| "mac vdev %d preamble %dn", | |
| arvif->vdev_id, preamble); | |
| vdev_param = ar->wmi.vdev_param->preamble; | |
| ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id, vdev_param, | |
| preamble); | |
| if (ret) | |
| ath10k_warn(ar, "failed to set preamble for vdev %d: %i\n", | |
| arvif->vdev_id, ret); | |
| } | |
| if (changed & BSS_CHANGED_ASSOC) { | |
| if (info->assoc) { | |
| /* Workaround: Make sure monitor vdev is not running | |
| * when associating to prevent some firmware revisions | |
| * (e.g. 10.1 and 10.2) from crashing. | |
| */ | |
| if (ar->monitor_started) | |
| ath10k_monitor_stop(ar); | |
| ath10k_bss_assoc(hw, vif, info); | |
| ath10k_monitor_recalc(ar); | |
| } else { | |
| ath10k_bss_disassoc(hw, vif); | |
| } | |
| } | |
| if (changed & BSS_CHANGED_TXPOWER) { | |
| ath10k_dbg(ar, ATH10K_DBG_MAC, "mac vdev_id %i txpower %d\n", | |
| arvif->vdev_id, info->txpower); | |
| arvif->txpower = info->txpower; | |
| ret = ath10k_mac_txpower_recalc(ar); | |
| if (ret) | |
| ath10k_warn(ar, "failed to recalc tx power: %d\n", ret); | |
| } | |
| if (changed & BSS_CHANGED_PS) { | |
| arvif->ps = vif->bss_conf.ps; | |
| ret = ath10k_config_ps(ar); | |
| if (ret) | |
| ath10k_warn(ar, "failed to setup ps on vdev %i: %d\n", | |
| arvif->vdev_id, ret); | |
| } | |
| mutex_unlock(&ar->conf_mutex); | |
| } | |
| static int ath10k_hw_scan(struct ieee80211_hw *hw, | |
| struct ieee80211_vif *vif, | |
| struct ieee80211_scan_request *hw_req) | |
| { | |
| struct ath10k *ar = hw->priv; | |
| struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif); | |
| struct cfg80211_scan_request *req = &hw_req->req; | |
| struct wmi_start_scan_arg arg; | |
| int ret = 0; | |
| int i; | |
| mutex_lock(&ar->conf_mutex); | |
| spin_lock_bh(&ar->data_lock); | |
| switch (ar->scan.state) { | |
| case ATH10K_SCAN_IDLE: | |
| reinit_completion(&ar->scan.started); | |
| reinit_completion(&ar->scan.completed); | |
| ar->scan.state = ATH10K_SCAN_STARTING; | |
| ar->scan.is_roc = false; | |
| ar->scan.vdev_id = arvif->vdev_id; | |
| ret = 0; | |
| break; | |
| case ATH10K_SCAN_STARTING: | |
| case ATH10K_SCAN_RUNNING: | |
| case ATH10K_SCAN_ABORTING: | |
| ret = -EBUSY; | |
| break; | |
| } | |
| spin_unlock_bh(&ar->data_lock); | |
| if (ret) | |
| goto exit; | |
| memset(&arg, 0, sizeof(arg)); | |
| ath10k_wmi_start_scan_init(ar, &arg); | |
| arg.vdev_id = arvif->vdev_id; | |
| arg.scan_id = ATH10K_SCAN_ID; | |
| if (req->ie_len) { | |
| arg.ie_len = req->ie_len; | |
| memcpy(arg.ie, req->ie, arg.ie_len); | |
| } | |
| if (req->n_ssids) { | |
| arg.n_ssids = req->n_ssids; | |
| for (i = 0; i < arg.n_ssids; i++) { | |
| arg.ssids[i].len = req->ssids[i].ssid_len; | |
| arg.ssids[i].ssid = req->ssids[i].ssid; | |
| } | |
| } else { | |
| arg.scan_ctrl_flags |= WMI_SCAN_FLAG_PASSIVE; | |
| } | |
| if (req->n_channels) { | |
| arg.n_channels = req->n_channels; | |
| for (i = 0; i < arg.n_channels; i++) | |
| arg.channels[i] = req->channels[i]->center_freq; | |
| } | |
| ret = ath10k_start_scan(ar, &arg); | |
| if (ret) { | |
| ath10k_warn(ar, "failed to start hw scan: %d\n", ret); | |
| spin_lock_bh(&ar->data_lock); | |
| ar->scan.state = ATH10K_SCAN_IDLE; | |
| spin_unlock_bh(&ar->data_lock); | |
| } | |
| /* Add a 200ms margin to account for event/command processing */ | |
| ieee80211_queue_delayed_work(ar->hw, &ar->scan.timeout, | |
| msecs_to_jiffies(arg.max_scan_time + | |
| 200)); | |
| exit: | |
| mutex_unlock(&ar->conf_mutex); | |
| return ret; | |
| } | |
| static void ath10k_cancel_hw_scan(struct ieee80211_hw *hw, | |
| struct ieee80211_vif *vif) | |
| { | |
| struct ath10k *ar = hw->priv; | |
| mutex_lock(&ar->conf_mutex); | |
| ath10k_scan_abort(ar); | |
| mutex_unlock(&ar->conf_mutex); | |
| cancel_delayed_work_sync(&ar->scan.timeout); | |
| } | |
| static void ath10k_set_key_h_def_keyidx(struct ath10k *ar, | |
| struct ath10k_vif *arvif, | |
| enum set_key_cmd cmd, | |
| struct ieee80211_key_conf *key) | |
| { | |
| u32 vdev_param = arvif->ar->wmi.vdev_param->def_keyid; | |
| int ret; | |
| /* 10.1 firmware branch requires default key index to be set to group | |
| * key index after installing it. Otherwise FW/HW Txes corrupted | |
| * frames with multi-vif APs. This is not required for main firmware | |
| * branch (e.g. 636). | |
| * | |
| * This is also needed for 636 fw for IBSS-RSN to work more reliably. | |
| * | |
| * FIXME: It remains unknown if this is required for multi-vif STA | |
| * interfaces on 10.1. | |
| */ | |
| if (arvif->vdev_type != WMI_VDEV_TYPE_AP && | |
| arvif->vdev_type != WMI_VDEV_TYPE_IBSS) | |
| return; | |
| if (key->cipher == WLAN_CIPHER_SUITE_WEP40) | |
| return; | |
| if (key->cipher == WLAN_CIPHER_SUITE_WEP104) | |
| return; | |
| if (key->flags & IEEE80211_KEY_FLAG_PAIRWISE) | |
| return; | |
| if (cmd != SET_KEY) | |
| return; | |
| ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id, vdev_param, | |
| key->keyidx); | |
| if (ret) | |
| ath10k_warn(ar, "failed to set vdev %i group key as default key: %d\n", | |
| arvif->vdev_id, ret); | |
| } | |
| static int ath10k_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd, | |
| struct ieee80211_vif *vif, struct ieee80211_sta *sta, | |
| struct ieee80211_key_conf *key) | |
| { | |
| struct ath10k *ar = hw->priv; | |
| struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif); | |
| struct ath10k_peer *peer; | |
| const u8 *peer_addr; | |
| bool is_wep = key->cipher == WLAN_CIPHER_SUITE_WEP40 || | |
| key->cipher == WLAN_CIPHER_SUITE_WEP104; | |
| int ret = 0; | |
| int ret2; | |
| u32 flags = 0; | |
| u32 flags2; | |
| /* this one needs to be done in software */ | |
| if (key->cipher == WLAN_CIPHER_SUITE_AES_CMAC) | |
| return 1; | |
| if (arvif->nohwcrypt) | |
| return 1; | |
| if (key->keyidx > WMI_MAX_KEY_INDEX) | |
| return -ENOSPC; | |
| mutex_lock(&ar->conf_mutex); | |
| if (sta) | |
| peer_addr = sta->addr; | |
| else if (arvif->vdev_type == WMI_VDEV_TYPE_STA) | |
| peer_addr = vif->bss_conf.bssid; | |
| else | |
| peer_addr = vif->addr; | |
| key->hw_key_idx = key->keyidx; | |
| if (is_wep) { | |
| if (cmd == SET_KEY) | |
| arvif->wep_keys[key->keyidx] = key; | |
| else | |
| arvif->wep_keys[key->keyidx] = NULL; | |
| } | |
| /* the peer should not disappear in mid-way (unless FW goes awry) since | |
| * we already hold conf_mutex. we just make sure its there now. */ | |
| spin_lock_bh(&ar->data_lock); | |
| peer = ath10k_peer_find(ar, arvif->vdev_id, peer_addr); | |
| spin_unlock_bh(&ar->data_lock); | |
| if (!peer) { | |
| if (cmd == SET_KEY) { | |
| ath10k_warn(ar, "failed to install key for non-existent peer %pM\n", | |
| peer_addr); | |
| ret = -EOPNOTSUPP; | |
| goto exit; | |
| } else { | |
| /* if the peer doesn't exist there is no key to disable | |
| * anymore */ | |
| goto exit; | |
| } | |
| } | |
| if (key->flags & IEEE80211_KEY_FLAG_PAIRWISE) | |
| flags |= WMI_KEY_PAIRWISE; | |
| else | |
| flags |= WMI_KEY_GROUP; | |
| if (is_wep) { | |
| if (cmd == DISABLE_KEY) | |
| ath10k_clear_vdev_key(arvif, key); | |
| /* When WEP keys are uploaded it's possible that there are | |
| * stations associated already (e.g. when merging) without any | |
| * keys. Static WEP needs an explicit per-peer key upload. | |
| */ | |
| if (vif->type == NL80211_IFTYPE_ADHOC && | |
| cmd == SET_KEY) | |
| ath10k_mac_vif_update_wep_key(arvif, key); | |
| /* 802.1x never sets the def_wep_key_idx so each set_key() | |
| * call changes default tx key. | |
| * | |
| * Static WEP sets def_wep_key_idx via .set_default_unicast_key | |
| * after first set_key(). | |
| */ | |
| if (cmd == SET_KEY && arvif->def_wep_key_idx == -1) | |
| flags |= WMI_KEY_TX_USAGE; | |
| } | |
| ret = ath10k_install_key(arvif, key, cmd, peer_addr, flags); | |
| if (ret) { | |
| WARN_ON(ret > 0); | |
| ath10k_warn(ar, "failed to install key for vdev %i peer %pM: %d\n", | |
| arvif->vdev_id, peer_addr, ret); | |
| goto exit; | |
| } | |
| /* mac80211 sets static WEP keys as groupwise while firmware requires | |
| * them to be installed twice as both pairwise and groupwise. | |
| */ | |
| if (is_wep && !sta && vif->type == NL80211_IFTYPE_STATION) { | |
| flags2 = flags; | |
| flags2 &= ~WMI_KEY_GROUP; | |
| flags2 |= WMI_KEY_PAIRWISE; | |
| ret = ath10k_install_key(arvif, key, cmd, peer_addr, flags2); | |
| if (ret) { | |
| WARN_ON(ret > 0); | |
| ath10k_warn(ar, "failed to install (ucast) key for vdev %i peer %pM: %d\n", | |
| arvif->vdev_id, peer_addr, ret); | |
| ret2 = ath10k_install_key(arvif, key, DISABLE_KEY, | |
| peer_addr, flags); | |
| if (ret2) { | |
| WARN_ON(ret2 > 0); | |
| ath10k_warn(ar, "failed to disable (mcast) key for vdev %i peer %pM: %d\n", | |
| arvif->vdev_id, peer_addr, ret2); | |
| } | |
| goto exit; | |
| } | |
| } | |
| ath10k_set_key_h_def_keyidx(ar, arvif, cmd, key); | |
| spin_lock_bh(&ar->data_lock); | |
| peer = ath10k_peer_find(ar, arvif->vdev_id, peer_addr); | |
| if (peer && cmd == SET_KEY) | |
| peer->keys[key->keyidx] = key; | |
| else if (peer && cmd == DISABLE_KEY) | |
| peer->keys[key->keyidx] = NULL; | |
| else if (peer == NULL) | |
| /* impossible unless FW goes crazy */ | |
| ath10k_warn(ar, "Peer %pM disappeared!\n", peer_addr); | |
| spin_unlock_bh(&ar->data_lock); | |
| exit: | |
| mutex_unlock(&ar->conf_mutex); | |
| return ret; | |
| } | |
| static void ath10k_set_default_unicast_key(struct ieee80211_hw *hw, | |
| struct ieee80211_vif *vif, | |
| int keyidx) | |
| { | |
| struct ath10k *ar = hw->priv; | |
| struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif); | |
| int ret; | |
| mutex_lock(&arvif->ar->conf_mutex); | |
| if (arvif->ar->state != ATH10K_STATE_ON) | |
| goto unlock; | |
| ath10k_dbg(ar, ATH10K_DBG_MAC, "mac vdev %d set keyidx %d\n", | |
| arvif->vdev_id, keyidx); | |
| ret = ath10k_wmi_vdev_set_param(arvif->ar, | |
| arvif->vdev_id, | |
| arvif->ar->wmi.vdev_param->def_keyid, | |
| keyidx); | |
| if (ret) { | |
| ath10k_warn(ar, "failed to update wep key index for vdev %d: %d\n", | |
| arvif->vdev_id, | |
| ret); | |
| goto unlock; | |
| } | |
| arvif->def_wep_key_idx = keyidx; | |
| unlock: | |
| mutex_unlock(&arvif->ar->conf_mutex); | |
| } | |
| static void ath10k_sta_rc_update_wk(struct work_struct *wk) | |
| { | |
| struct ath10k *ar; | |
| struct ath10k_vif *arvif; | |
| struct ath10k_sta *arsta; | |
| struct ieee80211_sta *sta; | |
| struct cfg80211_chan_def def; | |
| enum ieee80211_band band; | |
| const u8 *ht_mcs_mask; | |
| const u16 *vht_mcs_mask; | |
| u32 changed, bw, nss, smps; | |
| int err; | |
| arsta = container_of(wk, struct ath10k_sta, update_wk); | |
| sta = container_of((void *)arsta, struct ieee80211_sta, drv_priv); | |
| arvif = arsta->arvif; | |
| ar = arvif->ar; | |
| if (WARN_ON(ath10k_mac_vif_chan(arvif->vif, &def))) | |
| return; | |
| band = def.chan->band; | |
| ht_mcs_mask = arvif->bitrate_mask.control[band].ht_mcs; | |
| vht_mcs_mask = arvif->bitrate_mask.control[band].vht_mcs; | |
| spin_lock_bh(&ar->data_lock); | |
| changed = arsta->changed; | |
| arsta->changed = 0; | |
| bw = arsta->bw; | |
| nss = arsta->nss; | |
| smps = arsta->smps; | |
| spin_unlock_bh(&ar->data_lock); | |
| mutex_lock(&ar->conf_mutex); | |
| nss = max_t(u32, 1, nss); | |
| nss = min(nss, max(ath10k_mac_max_ht_nss(ht_mcs_mask), | |
| ath10k_mac_max_vht_nss(vht_mcs_mask))); | |
| if (changed & IEEE80211_RC_BW_CHANGED) { | |
| ath10k_dbg(ar, ATH10K_DBG_MAC, "mac update sta %pM peer bw %d\n", | |
| sta->addr, bw); | |
| err = ath10k_wmi_peer_set_param(ar, arvif->vdev_id, sta->addr, | |
| WMI_PEER_CHAN_WIDTH, bw); | |
| if (err) | |
| ath10k_warn(ar, "failed to update STA %pM peer bw %d: %d\n", | |
| sta->addr, bw, err); | |
| } | |
| if (changed & IEEE80211_RC_NSS_CHANGED) { | |
| ath10k_dbg(ar, ATH10K_DBG_MAC, "mac update sta %pM nss %d\n", | |
| sta->addr, nss); | |
| err = ath10k_wmi_peer_set_param(ar, arvif->vdev_id, sta->addr, | |
| WMI_PEER_NSS, nss); | |
| if (err) | |
| ath10k_warn(ar, "failed to update STA %pM nss %d: %d\n", | |
| sta->addr, nss, err); | |
| } | |
| if (changed & IEEE80211_RC_SMPS_CHANGED) { | |
| ath10k_dbg(ar, ATH10K_DBG_MAC, "mac update sta %pM smps %d\n", | |
| sta->addr, smps); | |
| err = ath10k_wmi_peer_set_param(ar, arvif->vdev_id, sta->addr, | |
| WMI_PEER_SMPS_STATE, smps); | |
| if (err) | |
| ath10k_warn(ar, "failed to update STA %pM smps %d: %d\n", | |
| sta->addr, smps, err); | |
| } | |
| if (changed & IEEE80211_RC_SUPP_RATES_CHANGED || | |
| changed & IEEE80211_RC_NSS_CHANGED) { | |
| ath10k_dbg(ar, ATH10K_DBG_MAC, "mac update sta %pM supp rates/nss\n", | |
| sta->addr); | |
| err = ath10k_station_assoc(ar, arvif->vif, sta, true); | |
| if (err) | |
| ath10k_warn(ar, "failed to reassociate station: %pM\n", | |
| sta->addr); | |
| } | |
| mutex_unlock(&ar->conf_mutex); | |
| } | |
| static int ath10k_mac_inc_num_stations(struct ath10k_vif *arvif, | |
| struct ieee80211_sta *sta) | |
| { | |
| struct ath10k *ar = arvif->ar; | |
| lockdep_assert_held(&ar->conf_mutex); | |
| if (arvif->vdev_type == WMI_VDEV_TYPE_STA && !sta->tdls) | |
| return 0; | |
| if (ar->num_stations >= ar->max_num_stations) | |
| return -ENOBUFS; | |
| ar->num_stations++; | |
| return 0; | |
| } | |
| static void ath10k_mac_dec_num_stations(struct ath10k_vif *arvif, | |
| struct ieee80211_sta *sta) | |
| { | |
| struct ath10k *ar = arvif->ar; | |
| lockdep_assert_held(&ar->conf_mutex); | |
| if (arvif->vdev_type == WMI_VDEV_TYPE_STA && !sta->tdls) | |
| return; | |
| ar->num_stations--; | |
| } | |
| struct ath10k_mac_tdls_iter_data { | |
| u32 num_tdls_stations; | |
| struct ieee80211_vif *curr_vif; | |
| }; | |
| static void ath10k_mac_tdls_vif_stations_count_iter(void *data, | |
| struct ieee80211_sta *sta) | |
| { | |
| struct ath10k_mac_tdls_iter_data *iter_data = data; | |
| struct ath10k_sta *arsta = (struct ath10k_sta *)sta->drv_priv; | |
| struct ieee80211_vif *sta_vif = arsta->arvif->vif; | |
| if (sta->tdls && sta_vif == iter_data->curr_vif) | |
| iter_data->num_tdls_stations++; | |
| } | |
| static int ath10k_mac_tdls_vif_stations_count(struct ieee80211_hw *hw, | |
| struct ieee80211_vif *vif) | |
| { | |
| struct ath10k_mac_tdls_iter_data data = {}; | |
| data.curr_vif = vif; | |
| ieee80211_iterate_stations_atomic(hw, | |
| ath10k_mac_tdls_vif_stations_count_iter, | |
| &data); | |
| return data.num_tdls_stations; | |
| } | |
| static void ath10k_mac_tdls_vifs_count_iter(void *data, u8 *mac, | |
| struct ieee80211_vif *vif) | |
| { | |
| struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif); | |
| int *num_tdls_vifs = data; | |
| if (vif->type != NL80211_IFTYPE_STATION) | |
| return; | |
| if (ath10k_mac_tdls_vif_stations_count(arvif->ar->hw, vif) > 0) | |
| (*num_tdls_vifs)++; | |
| } | |
| static int ath10k_mac_tdls_vifs_count(struct ieee80211_hw *hw) | |
| { | |
| int num_tdls_vifs = 0; | |
| ieee80211_iterate_active_interfaces_atomic(hw, | |
| IEEE80211_IFACE_ITER_NORMAL, | |
| ath10k_mac_tdls_vifs_count_iter, | |
| &num_tdls_vifs); | |
| return num_tdls_vifs; | |
| } | |
| static int ath10k_sta_state(struct ieee80211_hw *hw, | |
| struct ieee80211_vif *vif, | |
| struct ieee80211_sta *sta, | |
| enum ieee80211_sta_state old_state, | |
| enum ieee80211_sta_state new_state) | |
| { | |
| struct ath10k *ar = hw->priv; | |
| struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif); | |
| struct ath10k_sta *arsta = (struct ath10k_sta *)sta->drv_priv; | |
| int ret = 0; | |
| if (old_state == IEEE80211_STA_NOTEXIST && | |
| new_state == IEEE80211_STA_NONE) { | |
| memset(arsta, 0, sizeof(*arsta)); | |
| arsta->arvif = arvif; | |
| INIT_WORK(&arsta->update_wk, ath10k_sta_rc_update_wk); | |
| } | |
| /* cancel must be done outside the mutex to avoid deadlock */ | |
| if ((old_state == IEEE80211_STA_NONE && | |
| new_state == IEEE80211_STA_NOTEXIST)) | |
| cancel_work_sync(&arsta->update_wk); | |
| mutex_lock(&ar->conf_mutex); | |
| if (old_state == IEEE80211_STA_NOTEXIST && | |
| new_state == IEEE80211_STA_NONE) { | |
| /* | |
| * New station addition. | |
| */ | |
| enum wmi_peer_type peer_type = WMI_PEER_TYPE_DEFAULT; | |
| u32 num_tdls_stations; | |
| u32 num_tdls_vifs; | |
| ath10k_dbg(ar, ATH10K_DBG_MAC, | |
| "mac vdev %d peer create %pM (new sta) sta %d / %d peer %d / %d\n", | |
| arvif->vdev_id, sta->addr, | |
| ar->num_stations + 1, ar->max_num_stations, | |
| ar->num_peers + 1, ar->max_num_peers); | |
| ret = ath10k_mac_inc_num_stations(arvif, sta); | |
| if (ret) { | |
| ath10k_warn(ar, "refusing to associate station: too many connected already (%d)\n", | |
| ar->max_num_stations); | |
| goto exit; | |
| } | |
| if (sta->tdls) | |
| peer_type = WMI_PEER_TYPE_TDLS; | |
| ret = ath10k_peer_create(ar, arvif->vdev_id, sta->addr, | |
| peer_type); | |
| if (ret) { | |
| ath10k_warn(ar, "failed to add peer %pM for vdev %d when adding a new sta: %i\n", | |
| sta->addr, arvif->vdev_id, ret); | |
| ath10k_mac_dec_num_stations(arvif, sta); | |
| goto exit; | |
| } | |
| if (!sta->tdls) | |
| goto exit; | |
| num_tdls_stations = ath10k_mac_tdls_vif_stations_count(hw, vif); | |
| num_tdls_vifs = ath10k_mac_tdls_vifs_count(hw); | |
| if (num_tdls_vifs >= ar->max_num_tdls_vdevs && | |
| num_tdls_stations == 0) { | |
| ath10k_warn(ar, "vdev %i exceeded maximum number of tdls vdevs %i\n", | |
| arvif->vdev_id, ar->max_num_tdls_vdevs); | |
| ath10k_peer_delete(ar, arvif->vdev_id, sta->addr); | |
| ath10k_mac_dec_num_stations(arvif, sta); | |
| ret = -ENOBUFS; | |
| goto exit; | |
| } | |
| if (num_tdls_stations == 0) { | |
| /* This is the first tdls peer in current vif */ | |
| enum wmi_tdls_state state = WMI_TDLS_ENABLE_ACTIVE; | |
| ret = ath10k_wmi_update_fw_tdls_state(ar, arvif->vdev_id, | |
| state); | |
| if (ret) { | |
| ath10k_warn(ar, "failed to update fw tdls state on vdev %i: %i\n", | |
| arvif->vdev_id, ret); | |
| ath10k_peer_delete(ar, arvif->vdev_id, | |
| sta->addr); | |
| ath10k_mac_dec_num_stations(arvif, sta); | |
| goto exit; | |
| } | |
| } | |
| ret = ath10k_mac_tdls_peer_update(ar, arvif->vdev_id, sta, | |
| WMI_TDLS_PEER_STATE_PEERING); | |
| if (ret) { | |
| ath10k_warn(ar, | |
| "failed to update tdls peer %pM for vdev %d when adding a new sta: %i\n", | |
| sta->addr, arvif->vdev_id, ret); | |
| ath10k_peer_delete(ar, arvif->vdev_id, sta->addr); | |
| ath10k_mac_dec_num_stations(arvif, sta); | |
| if (num_tdls_stations != 0) | |
| goto exit; | |
| ath10k_wmi_update_fw_tdls_state(ar, arvif->vdev_id, | |
| WMI_TDLS_DISABLE); | |
| } | |
| } else if ((old_state == IEEE80211_STA_NONE && | |
| new_state == IEEE80211_STA_NOTEXIST)) { | |
| /* | |
| * Existing station deletion. | |
| */ | |
| ath10k_dbg(ar, ATH10K_DBG_MAC, | |
| "mac vdev %d peer delete %pM (sta gone)\n", | |
| arvif->vdev_id, sta->addr); | |
| ret = ath10k_peer_delete(ar, arvif->vdev_id, sta->addr); | |
| if (ret) | |
| ath10k_warn(ar, "failed to delete peer %pM for vdev %d: %i\n", | |
| sta->addr, arvif->vdev_id, ret); | |
| ath10k_mac_dec_num_stations(arvif, sta); | |
| if (!sta->tdls) | |
| goto exit; | |
| if (ath10k_mac_tdls_vif_stations_count(hw, vif)) | |
| goto exit; | |
| /* This was the last tdls peer in current vif */ | |
| ret = ath10k_wmi_update_fw_tdls_state(ar, arvif->vdev_id, | |
| WMI_TDLS_DISABLE); | |
| if (ret) { | |
| ath10k_warn(ar, "failed to update fw tdls state on vdev %i: %i\n", | |
| arvif->vdev_id, ret); | |
| } | |
| } else if (old_state == IEEE80211_STA_AUTH && | |
| new_state == IEEE80211_STA_ASSOC && | |
| (vif->type == NL80211_IFTYPE_AP || | |
| vif->type == NL80211_IFTYPE_MESH_POINT || | |
| vif->type == NL80211_IFTYPE_ADHOC)) { | |
| /* | |
| * New association. | |
| */ | |
| ath10k_dbg(ar, ATH10K_DBG_MAC, "mac sta %pM associated\n", | |
| sta->addr); | |
| ret = ath10k_station_assoc(ar, vif, sta, false); | |
| if (ret) | |
| ath10k_warn(ar, "failed to associate station %pM for vdev %i: %i\n", | |
| sta->addr, arvif->vdev_id, ret); | |
| } else if (old_state == IEEE80211_STA_ASSOC && | |
| new_state == IEEE80211_STA_AUTHORIZED && | |
| sta->tdls) { | |
| /* | |
| * Tdls station authorized. | |
| */ | |
| ath10k_dbg(ar, ATH10K_DBG_MAC, "mac tdls sta %pM authorized\n", | |
| sta->addr); | |
| ret = ath10k_station_assoc(ar, vif, sta, false); | |
| if (ret) { | |
| ath10k_warn(ar, "failed to associate tdls station %pM for vdev %i: %i\n", | |
| sta->addr, arvif->vdev_id, ret); | |
| goto exit; | |
| } | |
| ret = ath10k_mac_tdls_peer_update(ar, arvif->vdev_id, sta, | |
| WMI_TDLS_PEER_STATE_CONNECTED); | |
| if (ret) | |
| ath10k_warn(ar, "failed to update tdls peer %pM for vdev %i: %i\n", | |
| sta->addr, arvif->vdev_id, ret); | |
| } else if (old_state == IEEE80211_STA_ASSOC && | |
| new_state == IEEE80211_STA_AUTH && | |
| (vif->type == NL80211_IFTYPE_AP || | |
| vif->type == NL80211_IFTYPE_MESH_POINT || | |
| vif->type == NL80211_IFTYPE_ADHOC)) { | |
| /* | |
| * Disassociation. | |
| */ | |
| ath10k_dbg(ar, ATH10K_DBG_MAC, "mac sta %pM disassociated\n", | |
| sta->addr); | |
| ret = ath10k_station_disassoc(ar, vif, sta); | |
| if (ret) | |
| ath10k_warn(ar, "failed to disassociate station: %pM vdev %i: %i\n", | |
| sta->addr, arvif->vdev_id, ret); | |
| } | |
| exit: | |
| mutex_unlock(&ar->conf_mutex); | |
| return ret; | |
| } | |
| static int ath10k_conf_tx_uapsd(struct ath10k *ar, struct ieee80211_vif *vif, | |
| u16 ac, bool enable) | |
| { | |
| struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif); | |
| struct wmi_sta_uapsd_auto_trig_arg arg = {}; | |
| u32 prio = 0, acc = 0; | |
| u32 value = 0; | |
| int ret = 0; | |
| lockdep_assert_held(&ar->conf_mutex); | |
| if (arvif->vdev_type != WMI_VDEV_TYPE_STA) | |
| return 0; | |
| switch (ac) { | |
| case IEEE80211_AC_VO: | |
| value = WMI_STA_PS_UAPSD_AC3_DELIVERY_EN | | |
| WMI_STA_PS_UAPSD_AC3_TRIGGER_EN; | |
| prio = 7; | |
| acc = 3; | |
| break; | |
| case IEEE80211_AC_VI: | |
| value = WMI_STA_PS_UAPSD_AC2_DELIVERY_EN | | |
| WMI_STA_PS_UAPSD_AC2_TRIGGER_EN; | |
| prio = 5; | |
| acc = 2; | |
| break; | |
| case IEEE80211_AC_BE: | |
| value = WMI_STA_PS_UAPSD_AC1_DELIVERY_EN | | |
| WMI_STA_PS_UAPSD_AC1_TRIGGER_EN; | |
| prio = 2; | |
| acc = 1; | |
| break; | |
| case IEEE80211_AC_BK: | |
| value = WMI_STA_PS_UAPSD_AC0_DELIVERY_EN | | |
| WMI_STA_PS_UAPSD_AC0_TRIGGER_EN; | |
| prio = 0; | |
| acc = 0; | |
| break; | |
| } | |
| if (enable) | |
| arvif->u.sta.uapsd |= value; | |
| else | |
| arvif->u.sta.uapsd &= ~value; | |
| ret = ath10k_wmi_set_sta_ps_param(ar, arvif->vdev_id, | |
| WMI_STA_PS_PARAM_UAPSD, | |
| arvif->u.sta.uapsd); | |
| if (ret) { | |
| ath10k_warn(ar, "failed to set uapsd params: %d\n", ret); | |
| goto exit; | |
| } | |
| if (arvif->u.sta.uapsd) | |
| value = WMI_STA_PS_RX_WAKE_POLICY_POLL_UAPSD; | |
| else | |
| value = WMI_STA_PS_RX_WAKE_POLICY_WAKE; | |
| ret = ath10k_wmi_set_sta_ps_param(ar, arvif->vdev_id, | |
| WMI_STA_PS_PARAM_RX_WAKE_POLICY, | |
| value); | |
| if (ret) | |
| ath10k_warn(ar, "failed to set rx wake param: %d\n", ret); | |
| ret = ath10k_mac_vif_recalc_ps_wake_threshold(arvif); | |
| if (ret) { | |
| ath10k_warn(ar, "failed to recalc ps wake threshold on vdev %i: %d\n", | |
| arvif->vdev_id, ret); | |
| return ret; | |
| } | |
| ret = ath10k_mac_vif_recalc_ps_poll_count(arvif); | |
| if (ret) { | |
| ath10k_warn(ar, "failed to recalc ps poll count on vdev %i: %d\n", | |
| arvif->vdev_id, ret); | |
| return ret; | |
| } | |
| if (test_bit(WMI_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG, ar->wmi.svc_map) || | |
| test_bit(WMI_SERVICE_STA_UAPSD_VAR_AUTO_TRIG, ar->wmi.svc_map)) { | |
| /* Only userspace can make an educated decision when to send | |
| * trigger frame. The following effectively disables u-UAPSD | |
| * autotrigger in firmware (which is enabled by default | |
| * provided the autotrigger service is available). | |
| */ | |
| arg.wmm_ac = acc; | |
| arg.user_priority = prio; | |
| arg.service_interval = 0; | |
| arg.suspend_interval = WMI_STA_UAPSD_MAX_INTERVAL_MSEC; | |
| arg.delay_interval = WMI_STA_UAPSD_MAX_INTERVAL_MSEC; | |
| ret = ath10k_wmi_vdev_sta_uapsd(ar, arvif->vdev_id, | |
| arvif->bssid, &arg, 1); | |
| if (ret) { | |
| ath10k_warn(ar, "failed to set uapsd auto trigger %d\n", | |
| ret); | |
| return ret; | |
| } | |
| } | |
| exit: | |
| return ret; | |
| } | |
| static int ath10k_conf_tx(struct ieee80211_hw *hw, | |
| struct ieee80211_vif *vif, u16 ac, | |
| const struct ieee80211_tx_queue_params *params) | |
| { | |
| struct ath10k *ar = hw->priv; | |
| struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif); | |
| struct wmi_wmm_params_arg *p = NULL; | |
| int ret; | |
| mutex_lock(&ar->conf_mutex); | |
| switch (ac) { | |
| case IEEE80211_AC_VO: | |
| p = &arvif->wmm_params.ac_vo; | |
| break; | |
| case IEEE80211_AC_VI: | |
| p = &arvif->wmm_params.ac_vi; | |
| break; | |
| case IEEE80211_AC_BE: | |
| p = &arvif->wmm_params.ac_be; | |
| break; | |
| case IEEE80211_AC_BK: | |
| p = &arvif->wmm_params.ac_bk; | |
| break; | |
| } | |
| if (WARN_ON(!p)) { | |
| ret = -EINVAL; | |
| goto exit; | |
| } | |
| p->cwmin = params->cw_min; | |
| p->cwmax = params->cw_max; | |
| p->aifs = params->aifs; | |
| /* | |
| * The channel time duration programmed in the HW is in absolute | |
| * microseconds, while mac80211 gives the txop in units of | |
| * 32 microseconds. | |
| */ | |
| p->txop = params->txop * 32; | |
| if (ar->wmi.ops->gen_vdev_wmm_conf) { | |
| ret = ath10k_wmi_vdev_wmm_conf(ar, arvif->vdev_id, | |
| &arvif->wmm_params); | |
| if (ret) { | |
| ath10k_warn(ar, "failed to set vdev wmm params on vdev %i: %d\n", | |
| arvif->vdev_id, ret); | |
| goto exit; | |
| } | |
| } else { | |
| /* This won't work well with multi-interface cases but it's | |
| * better than nothing. | |
| */ | |
| ret = ath10k_wmi_pdev_set_wmm_params(ar, &arvif->wmm_params); | |
| if (ret) { | |
| ath10k_warn(ar, "failed to set wmm params: %d\n", ret); | |
| goto exit; | |
| } | |
| } | |
| ret = ath10k_conf_tx_uapsd(ar, vif, ac, params->uapsd); | |
| if (ret) | |
| ath10k_warn(ar, "failed to set sta uapsd: %d\n", ret); | |
| exit: | |
| mutex_unlock(&ar->conf_mutex); | |
| return ret; | |
| } | |
| #define ATH10K_ROC_TIMEOUT_HZ (2*HZ) | |
| static int ath10k_remain_on_channel(struct ieee80211_hw *hw, | |
| struct ieee80211_vif *vif, | |
| struct ieee80211_channel *chan, | |
| int duration, | |
| enum ieee80211_roc_type type) | |
| { | |
| struct ath10k *ar = hw->priv; | |
| struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif); | |
| struct wmi_start_scan_arg arg; | |
| int ret = 0; | |
| u32 scan_time_msec; | |
| mutex_lock(&ar->conf_mutex); | |
| spin_lock_bh(&ar->data_lock); | |
| switch (ar->scan.state) { | |
| case ATH10K_SCAN_IDLE: | |
| reinit_completion(&ar->scan.started); | |
| reinit_completion(&ar->scan.completed); | |
| reinit_completion(&ar->scan.on_channel); | |
| ar->scan.state = ATH10K_SCAN_STARTING; | |
| ar->scan.is_roc = true; | |
| ar->scan.vdev_id = arvif->vdev_id; | |
| ar->scan.roc_freq = chan->center_freq; | |
| ar->scan.roc_notify = true; | |
| ret = 0; | |
| break; | |
| case ATH10K_SCAN_STARTING: | |
| case ATH10K_SCAN_RUNNING: | |
| case ATH10K_SCAN_ABORTING: | |
| ret = -EBUSY; | |
| break; | |
| } | |
| spin_unlock_bh(&ar->data_lock); | |
| if (ret) | |
| goto exit; | |
| scan_time_msec = ar->hw->wiphy->max_remain_on_channel_duration * 2; | |
| memset(&arg, 0, sizeof(arg)); | |
| ath10k_wmi_start_scan_init(ar, &arg); | |
| arg.vdev_id = arvif->vdev_id; | |
| arg.scan_id = ATH10K_SCAN_ID; | |
| arg.n_channels = 1; | |
| arg.channels[0] = chan->center_freq; | |
| arg.dwell_time_active = scan_time_msec; | |
| arg.dwell_time_passive = scan_time_msec; | |
| arg.max_scan_time = scan_time_msec; | |
| arg.scan_ctrl_flags |= WMI_SCAN_FLAG_PASSIVE; | |
| arg.scan_ctrl_flags |= WMI_SCAN_FILTER_PROBE_REQ; | |
| arg.burst_duration_ms = duration; | |
| ret = ath10k_start_scan(ar, &arg); | |
| if (ret) { | |
| ath10k_warn(ar, "failed to start roc scan: %d\n", ret); | |
| spin_lock_bh(&ar->data_lock); | |
| ar->scan.state = ATH10K_SCAN_IDLE; | |
| spin_unlock_bh(&ar->data_lock); | |
| goto exit; | |
| } | |
| ret = wait_for_completion_timeout(&ar->scan.on_channel, 3*HZ); | |
| if (ret == 0) { | |
| ath10k_warn(ar, "failed to switch to channel for roc scan\n"); | |
| ret = ath10k_scan_stop(ar); | |
| if (ret) | |
| ath10k_warn(ar, "failed to stop scan: %d\n", ret); | |
| ret = -ETIMEDOUT; | |
| goto exit; | |
| } | |
| ieee80211_queue_delayed_work(ar->hw, &ar->scan.timeout, | |
| msecs_to_jiffies(duration)); | |
| ret = 0; | |
| exit: | |
| mutex_unlock(&ar->conf_mutex); | |
| return ret; | |
| } | |
| static int ath10k_cancel_remain_on_channel(struct ieee80211_hw *hw) | |
| { | |
| struct ath10k *ar = hw->priv; | |
| mutex_lock(&ar->conf_mutex); | |
| spin_lock_bh(&ar->data_lock); | |
| ar->scan.roc_notify = false; | |
| spin_unlock_bh(&ar->data_lock); | |
| ath10k_scan_abort(ar); | |
| mutex_unlock(&ar->conf_mutex); | |
| cancel_delayed_work_sync(&ar->scan.timeout); | |
| return 0; | |
| } | |
| /* | |
| * Both RTS and Fragmentation threshold are interface-specific | |
| * in ath10k, but device-specific in mac80211. | |
| */ | |
| static int ath10k_set_rts_threshold(struct ieee80211_hw *hw, u32 value) | |
| { | |
| struct ath10k *ar = hw->priv; | |
| struct ath10k_vif *arvif; | |
| int ret = 0; | |
| mutex_lock(&ar->conf_mutex); | |
| list_for_each_entry(arvif, &ar->arvifs, list) { | |
| ath10k_dbg(ar, ATH10K_DBG_MAC, "mac vdev %d rts threshold %d\n", | |
| arvif->vdev_id, value); | |
| ret = ath10k_mac_set_rts(arvif, value); | |
| if (ret) { | |
| ath10k_warn(ar, "failed to set rts threshold for vdev %d: %d\n", | |
| arvif->vdev_id, ret); | |
| break; | |
| } | |
| } | |
| mutex_unlock(&ar->conf_mutex); | |
| return ret; | |
| } | |
| static int ath10k_mac_op_set_frag_threshold(struct ieee80211_hw *hw, u32 value) | |
| { | |
| /* Even though there's a WMI enum for fragmentation threshold no known | |
| * firmware actually implements it. Moreover it is not possible to rely | |
| * frame fragmentation to mac80211 because firmware clears the "more | |
| * fragments" bit in frame control making it impossible for remote | |
| * devices to reassemble frames. | |
| * | |
| * Hence implement a dummy callback just to say fragmentation isn't | |
| * supported. This effectively prevents mac80211 from doing frame | |
| * fragmentation in software. | |
| */ | |
| return -EOPNOTSUPP; | |
| } | |
| static void ath10k_flush(struct ieee80211_hw *hw, struct ieee80211_vif *vif, | |
| u32 queues, bool drop) | |
| { | |
| struct ath10k *ar = hw->priv; | |
| bool skip; | |
| long time_left; | |
| /* mac80211 doesn't care if we really xmit queued frames or not | |
| * we'll collect those frames either way if we stop/delete vdevs */ | |
| if (drop) | |
| return; | |
| mutex_lock(&ar->conf_mutex); | |
| if (ar->state == ATH10K_STATE_WEDGED) | |
| goto skip; | |
| time_left = wait_event_timeout(ar->htt.empty_tx_wq, ({ | |
| bool empty; | |
| spin_lock_bh(&ar->htt.tx_lock); | |
| empty = (ar->htt.num_pending_tx == 0); | |
| spin_unlock_bh(&ar->htt.tx_lock); | |
| skip = (ar->state == ATH10K_STATE_WEDGED) || | |
| test_bit(ATH10K_FLAG_CRASH_FLUSH, | |
| &ar->dev_flags); | |
| (empty || skip); | |
| }), ATH10K_FLUSH_TIMEOUT_HZ); | |
| if (time_left == 0 || skip) | |
| ath10k_warn(ar, "failed to flush transmit queue (skip %i ar-state %i): %ld\n", | |
| skip, ar->state, time_left); | |
| skip: | |
| mutex_unlock(&ar->conf_mutex); | |
| } | |
| /* TODO: Implement this function properly | |
| * For now it is needed to reply to Probe Requests in IBSS mode. | |
| * Propably we need this information from FW. | |
| */ | |
| static int ath10k_tx_last_beacon(struct ieee80211_hw *hw) | |
| { | |
| return 1; | |
| } | |
| static void ath10k_reconfig_complete(struct ieee80211_hw *hw, | |
| enum ieee80211_reconfig_type reconfig_type) | |
| { | |
| struct ath10k *ar = hw->priv; | |
| if (reconfig_type != IEEE80211_RECONFIG_TYPE_RESTART) | |
| return; | |
| mutex_lock(&ar->conf_mutex); | |
| /* If device failed to restart it will be in a different state, e.g. | |
| * ATH10K_STATE_WEDGED */ | |
| if (ar->state == ATH10K_STATE_RESTARTED) { | |
| ath10k_info(ar, "device successfully recovered\n"); | |
| ar->state = ATH10K_STATE_ON; | |
| ieee80211_wake_queues(ar->hw); | |
| } | |
| mutex_unlock(&ar->conf_mutex); | |
| } | |
| static int ath10k_get_survey(struct ieee80211_hw *hw, int idx, | |
| struct survey_info *survey) | |
| { | |
| struct ath10k *ar = hw->priv; | |
| struct ieee80211_supported_band *sband; | |
| struct survey_info *ar_survey = &ar->survey[idx]; | |
| int ret = 0; | |
| mutex_lock(&ar->conf_mutex); | |
| sband = hw->wiphy->bands[IEEE80211_BAND_2GHZ]; | |
| if (sband && idx >= sband->n_channels) { | |
| idx -= sband->n_channels; | |
| sband = NULL; | |
| } | |
| if (!sband) | |
| sband = hw->wiphy->bands[IEEE80211_BAND_5GHZ]; | |
| if (!sband || idx >= sband->n_channels) { | |
| ret = -ENOENT; | |
| goto exit; | |
| } | |
| spin_lock_bh(&ar->data_lock); | |
| memcpy(survey, ar_survey, sizeof(*survey)); | |
| spin_unlock_bh(&ar->data_lock); | |
| survey->channel = &sband->channels[idx]; | |
| if (ar->rx_channel == survey->channel) | |
| survey->filled |= SURVEY_INFO_IN_USE; | |
| exit: | |
| mutex_unlock(&ar->conf_mutex); | |
| return ret; | |
| } | |
| static bool | |
| ath10k_mac_bitrate_mask_has_single_rate(struct ath10k *ar, | |
| enum ieee80211_band band, | |
| const struct cfg80211_bitrate_mask *mask) | |
| { | |
| int num_rates = 0; | |
| int i; | |
| num_rates += hweight32(mask->control[band].legacy); | |
| for (i = 0; i < ARRAY_SIZE(mask->control[band].ht_mcs); i++) | |
| num_rates += hweight8(mask->control[band].ht_mcs[i]); | |
| for (i = 0; i < ARRAY_SIZE(mask->control[band].vht_mcs); i++) | |
| num_rates += hweight16(mask->control[band].vht_mcs[i]); | |
| return num_rates == 1; | |
| } | |
| static bool | |
| ath10k_mac_bitrate_mask_get_single_nss(struct ath10k *ar, | |
| enum ieee80211_band band, | |
| const struct cfg80211_bitrate_mask *mask, | |
| int *nss) | |
| { | |
| struct ieee80211_supported_band *sband = &ar->mac.sbands[band]; | |
| u16 vht_mcs_map = le16_to_cpu(sband->vht_cap.vht_mcs.tx_mcs_map); | |
| u8 ht_nss_mask = 0; | |
| u8 vht_nss_mask = 0; | |
| int i; | |
| if (mask->control[band].legacy) | |
| return false; | |
| for (i = 0; i < ARRAY_SIZE(mask->control[band].ht_mcs); i++) { | |
| if (mask->control[band].ht_mcs[i] == 0) | |
| continue; | |
| else if (mask->control[band].ht_mcs[i] == | |
| sband->ht_cap.mcs.rx_mask[i]) | |
| ht_nss_mask |= BIT(i); | |
| else | |
| return false; | |
| } | |
| for (i = 0; i < ARRAY_SIZE(mask->control[band].vht_mcs); i++) { | |
| if (mask->control[band].vht_mcs[i] == 0) | |
| continue; | |
| else if (mask->control[band].vht_mcs[i] == | |
| ath10k_mac_get_max_vht_mcs_map(vht_mcs_map, i)) | |
| vht_nss_mask |= BIT(i); | |
| else | |
| return false; | |
| } | |
| if (ht_nss_mask != vht_nss_mask) | |
| return false; | |
| if (ht_nss_mask == 0) | |
| return false; | |
| if (BIT(fls(ht_nss_mask)) - 1 != ht_nss_mask) | |
| return false; | |
| *nss = fls(ht_nss_mask); | |
| return true; | |
| } | |
| static int | |
| ath10k_mac_bitrate_mask_get_single_rate(struct ath10k *ar, | |
| enum ieee80211_band band, | |
| const struct cfg80211_bitrate_mask *mask, | |
| u8 *rate, u8 *nss) | |
| { | |
| struct ieee80211_supported_band *sband = &ar->mac.sbands[band]; | |
| int rate_idx; | |
| int i; | |
| u16 bitrate; | |
| u8 preamble; | |
| u8 hw_rate; | |
| if (hweight32(mask->control[band].legacy) == 1) { | |
| rate_idx = ffs(mask->control[band].legacy) - 1; | |
| hw_rate = sband->bitrates[rate_idx].hw_value; | |
| bitrate = sband->bitrates[rate_idx].bitrate; | |
| if (ath10k_mac_bitrate_is_cck(bitrate)) | |
| preamble = WMI_RATE_PREAMBLE_CCK; | |
| else | |
| preamble = WMI_RATE_PREAMBLE_OFDM; | |
| *nss = 1; | |
| *rate = preamble << 6 | | |
| (*nss - 1) << 4 | | |
| hw_rate << 0; | |
| return 0; | |
| } | |
| for (i = 0; i < ARRAY_SIZE(mask->control[band].ht_mcs); i++) { | |
| if (hweight8(mask->control[band].ht_mcs[i]) == 1) { | |
| *nss = i + 1; | |
| *rate = WMI_RATE_PREAMBLE_HT << 6 | | |
| (*nss - 1) << 4 | | |
| (ffs(mask->control[band].ht_mcs[i]) - 1); | |
| return 0; | |
| } | |
| } | |
| for (i = 0; i < ARRAY_SIZE(mask->control[band].vht_mcs); i++) { | |
| if (hweight16(mask->control[band].vht_mcs[i]) == 1) { | |
| *nss = i + 1; | |
| *rate = WMI_RATE_PREAMBLE_VHT << 6 | | |
| (*nss - 1) << 4 | | |
| (ffs(mask->control[band].vht_mcs[i]) - 1); | |
| return 0; | |
| } | |
| } | |
| return -EINVAL; | |
| } | |
| static int ath10k_mac_set_fixed_rate_params(struct ath10k_vif *arvif, | |
| u8 rate, u8 nss, u8 sgi, u8 ldpc) | |
| { | |
| struct ath10k *ar = arvif->ar; | |
| u32 vdev_param; | |
| int ret; | |
| lockdep_assert_held(&ar->conf_mutex); | |
| ath10k_dbg(ar, ATH10K_DBG_MAC, "mac set fixed rate params vdev %i rate 0x%02hhx nss %hhu sgi %hhu\n", | |
| arvif->vdev_id, rate, nss, sgi); | |
| vdev_param = ar->wmi.vdev_param->fixed_rate; | |
| ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id, vdev_param, rate); | |
| if (ret) { | |
| ath10k_warn(ar, "failed to set fixed rate param 0x%02x: %d\n", | |
| rate, ret); | |
| return ret; | |
| } | |
| vdev_param = ar->wmi.vdev_param->nss; | |
| ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id, vdev_param, nss); | |
| if (ret) { | |
| ath10k_warn(ar, "failed to set nss param %d: %d\n", nss, ret); | |
| return ret; | |
| } | |
| vdev_param = ar->wmi.vdev_param->sgi; | |
| ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id, vdev_param, sgi); | |
| if (ret) { | |
| ath10k_warn(ar, "failed to set sgi param %d: %d\n", sgi, ret); | |
| return ret; | |
| } | |
| vdev_param = ar->wmi.vdev_param->ldpc; | |
| ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id, vdev_param, ldpc); | |
| if (ret) { | |
| ath10k_warn(ar, "failed to set ldpc param %d: %d\n", ldpc, ret); | |
| return ret; | |
| } | |
| return 0; | |
| } | |
| static bool | |
| ath10k_mac_can_set_bitrate_mask(struct ath10k *ar, | |
| enum ieee80211_band band, | |
| const struct cfg80211_bitrate_mask *mask) | |
| { | |
| int i; | |
| u16 vht_mcs; | |
| /* Due to firmware limitation in WMI_PEER_ASSOC_CMDID it is impossible | |
| * to express all VHT MCS rate masks. Effectively only the following | |
| * ranges can be used: none, 0-7, 0-8 and 0-9. | |
| */ | |
| for (i = 0; i < NL80211_VHT_NSS_MAX; i++) { | |
| vht_mcs = mask->control[band].vht_mcs[i]; | |
| switch (vht_mcs) { | |
| case 0: | |
| case BIT(8) - 1: | |
| case BIT(9) - 1: | |
| case BIT(10) - 1: | |
| break; | |
| default: | |
| ath10k_warn(ar, "refusing bitrate mask with missing 0-7 VHT MCS rates\n"); | |
| return false; | |
| } | |
| } | |
| return true; | |
| } | |
| static void ath10k_mac_set_bitrate_mask_iter(void *data, | |
| struct ieee80211_sta *sta) | |
| { | |
| struct ath10k_vif *arvif = data; | |
| struct ath10k_sta *arsta = (struct ath10k_sta *)sta->drv_priv; | |
| struct ath10k *ar = arvif->ar; | |
| if (arsta->arvif != arvif) | |
| return; | |
| spin_lock_bh(&ar->data_lock); | |
| arsta->changed |= IEEE80211_RC_SUPP_RATES_CHANGED; | |
| spin_unlock_bh(&ar->data_lock); | |
| ieee80211_queue_work(ar->hw, &arsta->update_wk); | |
| } | |
| static int ath10k_mac_op_set_bitrate_mask(struct ieee80211_hw *hw, | |
| struct ieee80211_vif *vif, | |
| const struct cfg80211_bitrate_mask *mask) | |
| { | |
| struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif); | |
| struct cfg80211_chan_def def; | |
| struct ath10k *ar = arvif->ar; | |
| enum ieee80211_band band; | |
| const u8 *ht_mcs_mask; | |
| const u16 *vht_mcs_mask; | |
| u8 rate; | |
| u8 nss; | |
| u8 sgi; | |
| u8 ldpc; | |
| int single_nss; | |
| int ret; | |
| if (ath10k_mac_vif_chan(vif, &def)) | |
| return -EPERM; | |
| band = def.chan->band; | |
| ht_mcs_mask = mask->control[band].ht_mcs; | |
| vht_mcs_mask = mask->control[band].vht_mcs; | |
| ldpc = !!(ar->ht_cap_info & WMI_HT_CAP_LDPC); | |
| sgi = mask->control[band].gi; | |
| if (sgi == NL80211_TXRATE_FORCE_LGI) | |
| return -EINVAL; | |
| if (ath10k_mac_bitrate_mask_has_single_rate(ar, band, mask)) { | |
| ret = ath10k_mac_bitrate_mask_get_single_rate(ar, band, mask, | |
| &rate, &nss); | |
| if (ret) { | |
| ath10k_warn(ar, "failed to get single rate for vdev %i: %d\n", | |
| arvif->vdev_id, ret); | |
| return ret; | |
| } | |
| } else if (ath10k_mac_bitrate_mask_get_single_nss(ar, band, mask, | |
| &single_nss)) { | |
| rate = WMI_FIXED_RATE_NONE; | |
| nss = single_nss; | |
| } else { | |
| rate = WMI_FIXED_RATE_NONE; | |
| nss = min(ar->num_rf_chains, | |
| max(ath10k_mac_max_ht_nss(ht_mcs_mask), | |
| ath10k_mac_max_vht_nss(vht_mcs_mask))); | |
| if (!ath10k_mac_can_set_bitrate_mask(ar, band, mask)) | |
| return -EINVAL; | |
| mutex_lock(&ar->conf_mutex); | |
| arvif->bitrate_mask = *mask; | |
| ieee80211_iterate_stations_atomic(ar->hw, | |
| ath10k_mac_set_bitrate_mask_iter, | |
| arvif); | |
| mutex_unlock(&ar->conf_mutex); | |
| } | |
| mutex_lock(&ar->conf_mutex); | |
| ret = ath10k_mac_set_fixed_rate_params(arvif, rate, nss, sgi, ldpc); | |
| if (ret) { | |
| ath10k_warn(ar, "failed to set fixed rate params on vdev %i: %d\n", | |
| arvif->vdev_id, ret); | |
| goto exit; | |
| } | |
| exit: | |
| mutex_unlock(&ar->conf_mutex); | |
| return ret; | |
| } | |
| static void ath10k_sta_rc_update(struct ieee80211_hw *hw, | |
| struct ieee80211_vif *vif, | |
| struct ieee80211_sta *sta, | |
| u32 changed) | |
| { | |
| struct ath10k *ar = hw->priv; | |
| struct ath10k_sta *arsta = (struct ath10k_sta *)sta->drv_priv; | |
| u32 bw, smps; | |
| spin_lock_bh(&ar->data_lock); | |
| ath10k_dbg(ar, ATH10K_DBG_MAC, | |
| "mac sta rc update for %pM changed %08x bw %d nss %d smps %d\n", | |
| sta->addr, changed, sta->bandwidth, sta->rx_nss, | |
| sta->smps_mode); | |
| if (changed & IEEE80211_RC_BW_CHANGED) { | |
| bw = WMI_PEER_CHWIDTH_20MHZ; | |
| switch (sta->bandwidth) { | |
| case IEEE80211_STA_RX_BW_20: | |
| bw = WMI_PEER_CHWIDTH_20MHZ; | |
| break; | |
| case IEEE80211_STA_RX_BW_40: | |
| bw = WMI_PEER_CHWIDTH_40MHZ; | |
| break; | |
| case IEEE80211_STA_RX_BW_80: | |
| bw = WMI_PEER_CHWIDTH_80MHZ; | |
| break; | |
| case IEEE80211_STA_RX_BW_160: | |
| ath10k_warn(ar, "Invalid bandwidth %d in rc update for %pM\n", | |
| sta->bandwidth, sta->addr); | |
| bw = WMI_PEER_CHWIDTH_20MHZ; | |
| break; | |
| } | |
| arsta->bw = bw; | |
| } | |
| if (changed & IEEE80211_RC_NSS_CHANGED) | |
| arsta->nss = sta->rx_nss; | |
| if (changed & IEEE80211_RC_SMPS_CHANGED) { | |
| smps = WMI_PEER_SMPS_PS_NONE; | |
| switch (sta->smps_mode) { | |
| case IEEE80211_SMPS_AUTOMATIC: | |
| case IEEE80211_SMPS_OFF: | |
| smps = WMI_PEER_SMPS_PS_NONE; | |
| break; | |
| case IEEE80211_SMPS_STATIC: | |
| smps = WMI_PEER_SMPS_STATIC; | |
| break; | |
| case IEEE80211_SMPS_DYNAMIC: | |
| smps = WMI_PEER_SMPS_DYNAMIC; | |
| break; | |
| case IEEE80211_SMPS_NUM_MODES: | |
| ath10k_warn(ar, "Invalid smps %d in sta rc update for %pM\n", | |
| sta->smps_mode, sta->addr); | |
| smps = WMI_PEER_SMPS_PS_NONE; | |
| break; | |
| } | |
| arsta->smps = smps; | |
| } | |
| arsta->changed |= changed; | |
| spin_unlock_bh(&ar->data_lock); | |
| ieee80211_queue_work(hw, &arsta->update_wk); | |
| } | |
| static u64 ath10k_get_tsf(struct ieee80211_hw *hw, struct ieee80211_vif *vif) | |
| { | |
| /* | |
| * FIXME: Return 0 for time being. Need to figure out whether FW | |
| * has the API to fetch 64-bit local TSF | |
| */ | |
| return 0; | |
| } | |
| static int ath10k_ampdu_action(struct ieee80211_hw *hw, | |
| struct ieee80211_vif *vif, | |
| enum ieee80211_ampdu_mlme_action action, | |
| struct ieee80211_sta *sta, u16 tid, u16 *ssn, | |
| u8 buf_size, bool amsdu) | |
| { | |
| struct ath10k *ar = hw->priv; | |
| struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif); | |
| ath10k_dbg(ar, ATH10K_DBG_MAC, "mac ampdu vdev_id %i sta %pM tid %hu action %d\n", | |
| arvif->vdev_id, sta->addr, tid, action); | |
| switch (action) { | |
| case IEEE80211_AMPDU_RX_START: | |
| case IEEE80211_AMPDU_RX_STOP: | |
| /* HTT AddBa/DelBa events trigger mac80211 Rx BA session | |
| * creation/removal. Do we need to verify this? | |
| */ | |
| return 0; | |
| case IEEE80211_AMPDU_TX_START: | |
| case IEEE80211_AMPDU_TX_STOP_CONT: | |
| case IEEE80211_AMPDU_TX_STOP_FLUSH: | |
| case IEEE80211_AMPDU_TX_STOP_FLUSH_CONT: | |
| case IEEE80211_AMPDU_TX_OPERATIONAL: | |
| /* Firmware offloads Tx aggregation entirely so deny mac80211 | |
| * Tx aggregation requests. | |
| */ | |
| return -EOPNOTSUPP; | |
| } | |
| return -EINVAL; | |
| } | |
| static void | |
| ath10k_mac_update_rx_channel(struct ath10k *ar, | |
| struct ieee80211_chanctx_conf *ctx, | |
| struct ieee80211_vif_chanctx_switch *vifs, | |
| int n_vifs) | |
| { | |
| struct cfg80211_chan_def *def = NULL; | |
| /* Both locks are required because ar->rx_channel is modified. This | |
| * allows readers to hold either lock. | |
| */ | |
| lockdep_assert_held(&ar->conf_mutex); | |
| lockdep_assert_held(&ar->data_lock); | |
| WARN_ON(ctx && vifs); | |
| WARN_ON(vifs && n_vifs != 1); | |
| /* FIXME: Sort of an optimization and a workaround. Peers and vifs are | |
| * on a linked list now. Doing a lookup peer -> vif -> chanctx for each | |
| * ppdu on Rx may reduce performance on low-end systems. It should be | |
| * possible to make tables/hashmaps to speed the lookup up (be vary of | |
| * cpu data cache lines though regarding sizes) but to keep the initial | |
| * implementation simple and less intrusive fallback to the slow lookup | |
| * only for multi-channel cases. Single-channel cases will remain to | |
| * use the old channel derival and thus performance should not be | |
| * affected much. | |
| */ | |
| rcu_read_lock(); | |
| if (!ctx && ath10k_mac_num_chanctxs(ar) == 1) { | |
| ieee80211_iter_chan_contexts_atomic(ar->hw, | |
| ath10k_mac_get_any_chandef_iter, | |
| &def); | |
| if (vifs) | |
| def = &vifs[0].new_ctx->def; | |
| ar->rx_channel = def->chan; | |
| } else if (ctx && ath10k_mac_num_chanctxs(ar) == 0) { | |
| ar->rx_channel = ctx->def.chan; | |
| } else { | |
| ar->rx_channel = NULL; | |
| } | |
| rcu_read_unlock(); | |
| } | |
| static void | |
| ath10k_mac_update_vif_chan(struct ath10k *ar, | |
| struct ieee80211_vif_chanctx_switch *vifs, | |
| int n_vifs) | |
| { | |
| struct ath10k_vif *arvif; | |
| int ret; | |
| int i; | |
| lockdep_assert_held(&ar->conf_mutex); | |
| /* First stop monitor interface. Some FW versions crash if there's a | |
| * lone monitor interface. | |
| */ | |
| if (ar->monitor_started) | |
| ath10k_monitor_stop(ar); | |
| for (i = 0; i < n_vifs; i++) { | |
| arvif = ath10k_vif_to_arvif(vifs[i].vif); | |
| ath10k_dbg(ar, ATH10K_DBG_MAC, | |
| "mac chanctx switch vdev_id %i freq %hu->%hu width %d->%d\n", | |
| arvif->vdev_id, | |
| vifs[i].old_ctx->def.chan->center_freq, | |
| vifs[i].new_ctx->def.chan->center_freq, | |
| vifs[i].old_ctx->def.width, | |
| vifs[i].new_ctx->def.width); | |
| if (WARN_ON(!arvif->is_started)) | |
| continue; | |
| if (WARN_ON(!arvif->is_up)) | |
| continue; | |
| ret = ath10k_wmi_vdev_down(ar, arvif->vdev_id); | |
| if (ret) { | |
| ath10k_warn(ar, "failed to down vdev %d: %d\n", | |
| arvif->vdev_id, ret); | |
| continue; | |
| } | |
| } | |
| /* All relevant vdevs are downed and associated channel resources | |
| * should be available for the channel switch now. | |
| */ | |
| spin_lock_bh(&ar->data_lock); | |
| ath10k_mac_update_rx_channel(ar, NULL, vifs, n_vifs); | |
| spin_unlock_bh(&ar->data_lock); | |
| for (i = 0; i < n_vifs; i++) { | |
| arvif = ath10k_vif_to_arvif(vifs[i].vif); | |
| if (WARN_ON(!arvif->is_started)) | |
| continue; | |
| if (WARN_ON(!arvif->is_up)) | |
| continue; | |
| ret = ath10k_mac_setup_bcn_tmpl(arvif); | |
| if (ret) | |
| ath10k_warn(ar, "failed to update bcn tmpl during csa: %d\n", | |
| ret); | |
| ret = ath10k_mac_setup_prb_tmpl(arvif); | |
| if (ret) | |
| ath10k_warn(ar, "failed to update prb tmpl during csa: %d\n", | |
| ret); | |
| ret = ath10k_vdev_restart(arvif, &vifs[i].new_ctx->def); | |
| if (ret) { | |
| ath10k_warn(ar, "failed to restart vdev %d: %d\n", | |
| arvif->vdev_id, ret); | |
| continue; | |
| } | |
| ret = ath10k_wmi_vdev_up(arvif->ar, arvif->vdev_id, arvif->aid, | |
| arvif->bssid); | |
| if (ret) { | |
| ath10k_warn(ar, "failed to bring vdev up %d: %d\n", | |
| arvif->vdev_id, ret); | |
| continue; | |
| } | |
| } | |
| ath10k_monitor_recalc(ar); | |
| } | |
| static int | |
| ath10k_mac_op_add_chanctx(struct ieee80211_hw *hw, | |
| struct ieee80211_chanctx_conf *ctx) | |
| { | |
| struct ath10k *ar = hw->priv; | |
| ath10k_dbg(ar, ATH10K_DBG_MAC, | |
| "mac chanctx add freq %hu width %d ptr %p\n", | |
| ctx->def.chan->center_freq, ctx->def.width, ctx); | |
| mutex_lock(&ar->conf_mutex); | |
| spin_lock_bh(&ar->data_lock); | |
| ath10k_mac_update_rx_channel(ar, ctx, NULL, 0); | |
| spin_unlock_bh(&ar->data_lock); | |
| ath10k_recalc_radar_detection(ar); | |
| ath10k_monitor_recalc(ar); | |
| mutex_unlock(&ar->conf_mutex); | |
| return 0; | |
| } | |
| static void | |
| ath10k_mac_op_remove_chanctx(struct ieee80211_hw *hw, | |
| struct ieee80211_chanctx_conf *ctx) | |
| { | |
| struct ath10k *ar = hw->priv; | |
| ath10k_dbg(ar, ATH10K_DBG_MAC, | |
| "mac chanctx remove freq %hu width %d ptr %p\n", | |
| ctx->def.chan->center_freq, ctx->def.width, ctx); | |
| mutex_lock(&ar->conf_mutex); | |
| spin_lock_bh(&ar->data_lock); | |
| ath10k_mac_update_rx_channel(ar, NULL, NULL, 0); | |
| spin_unlock_bh(&ar->data_lock); | |
| ath10k_recalc_radar_detection(ar); | |
| ath10k_monitor_recalc(ar); | |
| mutex_unlock(&ar->conf_mutex); | |
| } | |
| struct ath10k_mac_change_chanctx_arg { | |
| struct ieee80211_chanctx_conf *ctx; | |
| struct ieee80211_vif_chanctx_switch *vifs; | |
| int n_vifs; | |
| int next_vif; | |
| }; | |
| static void | |
| ath10k_mac_change_chanctx_cnt_iter(void *data, u8 *mac, | |
| struct ieee80211_vif *vif) | |
| { | |
| struct ath10k_mac_change_chanctx_arg *arg = data; | |
| if (rcu_access_pointer(vif->chanctx_conf) != arg->ctx) | |
| return; | |
| arg->n_vifs++; | |
| } | |
| static void | |
| ath10k_mac_change_chanctx_fill_iter(void *data, u8 *mac, | |
| struct ieee80211_vif *vif) | |
| { | |
| struct ath10k_mac_change_chanctx_arg *arg = data; | |
| struct ieee80211_chanctx_conf *ctx; | |
| ctx = rcu_access_pointer(vif->chanctx_conf); | |
| if (ctx != arg->ctx) | |
| return; | |
| if (WARN_ON(arg->next_vif == arg->n_vifs)) | |
| return; | |
| arg->vifs[arg->next_vif].vif = vif; | |
| arg->vifs[arg->next_vif].old_ctx = ctx; | |
| arg->vifs[arg->next_vif].new_ctx = ctx; | |
| arg->next_vif++; | |
| } | |
| static void | |
| ath10k_mac_op_change_chanctx(struct ieee80211_hw *hw, | |
| struct ieee80211_chanctx_conf *ctx, | |
| u32 changed) | |
| { | |
| struct ath10k *ar = hw->priv; | |
| struct ath10k_mac_change_chanctx_arg arg = { .ctx = ctx }; | |
| mutex_lock(&ar->conf_mutex); | |
| ath10k_dbg(ar, ATH10K_DBG_MAC, | |
| "mac chanctx change freq %hu width %d ptr %p changed %x\n", | |
| ctx->def.chan->center_freq, ctx->def.width, ctx, changed); | |
| /* This shouldn't really happen because channel switching should use | |
| * switch_vif_chanctx(). | |
| */ | |
| if (WARN_ON(changed & IEEE80211_CHANCTX_CHANGE_CHANNEL)) | |
| goto unlock; | |
| if (changed & IEEE80211_CHANCTX_CHANGE_WIDTH) { | |
| ieee80211_iterate_active_interfaces_atomic( | |
| hw, | |
| IEEE80211_IFACE_ITER_NORMAL, | |
| ath10k_mac_change_chanctx_cnt_iter, | |
| &arg); | |
| if (arg.n_vifs == 0) | |
| goto radar; | |
| arg.vifs = kcalloc(arg.n_vifs, sizeof(arg.vifs[0]), | |
| GFP_KERNEL); | |
| if (!arg.vifs) | |
| goto radar; | |
| ieee80211_iterate_active_interfaces_atomic( | |
| hw, | |
| IEEE80211_IFACE_ITER_NORMAL, | |
| ath10k_mac_change_chanctx_fill_iter, | |
| &arg); | |
| ath10k_mac_update_vif_chan(ar, arg.vifs, arg.n_vifs); | |
| kfree(arg.vifs); | |
| } | |
| radar: | |
| ath10k_recalc_radar_detection(ar); | |
| /* FIXME: How to configure Rx chains properly? */ | |
| /* No other actions are actually necessary. Firmware maintains channel | |
| * definitions per vdev internally and there's no host-side channel | |
| * context abstraction to configure, e.g. channel width. | |
| */ | |
| unlock: | |
| mutex_unlock(&ar->conf_mutex); | |
| } | |
| static int | |
| ath10k_mac_op_assign_vif_chanctx(struct ieee80211_hw *hw, | |
| struct ieee80211_vif *vif, | |
| struct ieee80211_chanctx_conf *ctx) | |
| { | |
| struct ath10k *ar = hw->priv; | |
| struct ath10k_vif *arvif = (void *)vif->drv_priv; | |
| int ret; | |
| mutex_lock(&ar->conf_mutex); | |
| ath10k_dbg(ar, ATH10K_DBG_MAC, | |
| "mac chanctx assign ptr %p vdev_id %i\n", | |
| ctx, arvif->vdev_id); | |
| if (WARN_ON(arvif->is_started)) { | |
| mutex_unlock(&ar->conf_mutex); | |
| return -EBUSY; | |
| } | |
| ret = ath10k_vdev_start(arvif, &ctx->def); | |
| if (ret) { | |
| ath10k_warn(ar, "failed to start vdev %i addr %pM on freq %d: %d\n", | |
| arvif->vdev_id, vif->addr, | |
| ctx->def.chan->center_freq, ret); | |
| goto err; | |
| } | |
| arvif->is_started = true; | |
| ret = ath10k_mac_vif_setup_ps(arvif); | |
| if (ret) { | |
| ath10k_warn(ar, "failed to update vdev %i ps: %d\n", | |
| arvif->vdev_id, ret); | |
| goto err_stop; | |
| } | |
| if (vif->type == NL80211_IFTYPE_MONITOR) { | |
| ret = ath10k_wmi_vdev_up(ar, arvif->vdev_id, 0, vif->addr); | |
| if (ret) { | |
| ath10k_warn(ar, "failed to up monitor vdev %i: %d\n", | |
| arvif->vdev_id, ret); | |
| goto err_stop; | |
| } | |
| arvif->is_up = true; | |
| } | |
| mutex_unlock(&ar->conf_mutex); | |
| return 0; | |
| err_stop: | |
| ath10k_vdev_stop(arvif); | |
| arvif->is_started = false; | |
| ath10k_mac_vif_setup_ps(arvif); | |
| err: | |
| mutex_unlock(&ar->conf_mutex); | |
| return ret; | |
| } | |
| static void | |
| ath10k_mac_op_unassign_vif_chanctx(struct ieee80211_hw *hw, | |
| struct ieee80211_vif *vif, | |
| struct ieee80211_chanctx_conf *ctx) | |
| { | |
| struct ath10k *ar = hw->priv; | |
| struct ath10k_vif *arvif = (void *)vif->drv_priv; | |
| int ret; | |
| mutex_lock(&ar->conf_mutex); | |
| ath10k_dbg(ar, ATH10K_DBG_MAC, | |
| "mac chanctx unassign ptr %p vdev_id %i\n", | |
| ctx, arvif->vdev_id); | |
| WARN_ON(!arvif->is_started); | |
| if (vif->type == NL80211_IFTYPE_MONITOR) { | |
| WARN_ON(!arvif->is_up); | |
| ret = ath10k_wmi_vdev_down(ar, arvif->vdev_id); | |
| if (ret) | |
| ath10k_warn(ar, "failed to down monitor vdev %i: %d\n", | |
| arvif->vdev_id, ret); | |
| arvif->is_up = false; | |
| } | |
| ret = ath10k_vdev_stop(arvif); | |
| if (ret) | |
| ath10k_warn(ar, "failed to stop vdev %i: %d\n", | |
| arvif->vdev_id, ret); | |
| arvif->is_started = false; | |
| mutex_unlock(&ar->conf_mutex); | |
| } | |
| static int | |
| ath10k_mac_op_switch_vif_chanctx(struct ieee80211_hw *hw, | |
| struct ieee80211_vif_chanctx_switch *vifs, | |
| int n_vifs, | |
| enum ieee80211_chanctx_switch_mode mode) | |
| { | |
| struct ath10k *ar = hw->priv; | |
| mutex_lock(&ar->conf_mutex); | |
| ath10k_dbg(ar, ATH10K_DBG_MAC, | |
| "mac chanctx switch n_vifs %d mode %d\n", | |
| n_vifs, mode); | |
| ath10k_mac_update_vif_chan(ar, vifs, n_vifs); | |
| mutex_unlock(&ar->conf_mutex); | |
| return 0; | |
| } | |
| static const struct ieee80211_ops ath10k_ops = { | |
| .tx = ath10k_tx, | |
| .start = ath10k_start, | |
| .stop = ath10k_stop, | |
| .config = ath10k_config, | |
| .add_interface = ath10k_add_interface, | |
| .remove_interface = ath10k_remove_interface, | |
| .configure_filter = ath10k_configure_filter, | |
| .bss_info_changed = ath10k_bss_info_changed, | |
| .hw_scan = ath10k_hw_scan, | |
| .cancel_hw_scan = ath10k_cancel_hw_scan, | |
| .set_key = ath10k_set_key, | |
| .set_default_unicast_key = ath10k_set_default_unicast_key, | |
| .sta_state = ath10k_sta_state, | |
| .conf_tx = ath10k_conf_tx, | |
| .remain_on_channel = ath10k_remain_on_channel, | |
| .cancel_remain_on_channel = ath10k_cancel_remain_on_channel, | |
| .set_rts_threshold = ath10k_set_rts_threshold, | |
| .set_frag_threshold = ath10k_mac_op_set_frag_threshold, | |
| .flush = ath10k_flush, | |
| .tx_last_beacon = ath10k_tx_last_beacon, | |
| .set_antenna = ath10k_set_antenna, | |
| .get_antenna = ath10k_get_antenna, | |
| .reconfig_complete = ath10k_reconfig_complete, | |
| .get_survey = ath10k_get_survey, | |
| .set_bitrate_mask = ath10k_mac_op_set_bitrate_mask, | |
| .sta_rc_update = ath10k_sta_rc_update, | |
| .get_tsf = ath10k_get_tsf, | |
| .ampdu_action = ath10k_ampdu_action, | |
| .get_et_sset_count = ath10k_debug_get_et_sset_count, | |
| .get_et_stats = ath10k_debug_get_et_stats, | |
| .get_et_strings = ath10k_debug_get_et_strings, | |
| .add_chanctx = ath10k_mac_op_add_chanctx, | |
| .remove_chanctx = ath10k_mac_op_remove_chanctx, | |
| .change_chanctx = ath10k_mac_op_change_chanctx, | |
| .assign_vif_chanctx = ath10k_mac_op_assign_vif_chanctx, | |
| .unassign_vif_chanctx = ath10k_mac_op_unassign_vif_chanctx, | |
| .switch_vif_chanctx = ath10k_mac_op_switch_vif_chanctx, | |
| CFG80211_TESTMODE_CMD(ath10k_tm_cmd) | |
| #ifdef CONFIG_PM | |
| .suspend = ath10k_wow_op_suspend, | |
| .resume = ath10k_wow_op_resume, | |
| #endif | |
| #ifdef CONFIG_MAC80211_DEBUGFS | |
| .sta_add_debugfs = ath10k_sta_add_debugfs, | |
| #endif | |
| }; | |
| #define CHAN2G(_channel, _freq, _flags) { \ | |
| .band = IEEE80211_BAND_2GHZ, \ | |
| .hw_value = (_channel), \ | |
| .center_freq = (_freq), \ | |
| .flags = (_flags), \ | |
| .max_antenna_gain = 0, \ | |
| .max_power = 30, \ | |
| } | |
| #define CHAN5G(_channel, _freq, _flags) { \ | |
| .band = IEEE80211_BAND_5GHZ, \ | |
| .hw_value = (_channel), \ | |
| .center_freq = (_freq), \ | |
| .flags = (_flags), \ | |
| .max_antenna_gain = 0, \ | |
| .max_power = 30, \ | |
| } | |
| static const struct ieee80211_channel ath10k_2ghz_channels[] = { | |
| CHAN2G(1, 2412, 0), | |
| CHAN2G(2, 2417, 0), | |
| CHAN2G(3, 2422, 0), | |
| CHAN2G(4, 2427, 0), | |
| CHAN2G(5, 2432, 0), | |
| CHAN2G(6, 2437, 0), | |
| CHAN2G(7, 2442, 0), | |
| CHAN2G(8, 2447, 0), | |
| CHAN2G(9, 2452, 0), | |
| CHAN2G(10, 2457, 0), | |
| CHAN2G(11, 2462, 0), | |
| CHAN2G(12, 2467, 0), | |
| CHAN2G(13, 2472, 0), | |
| CHAN2G(14, 2484, 0), | |
| }; | |
| static const struct ieee80211_channel ath10k_5ghz_channels[] = { | |
| CHAN5G(36, 5180, 0), | |
| CHAN5G(40, 5200, 0), | |
| CHAN5G(44, 5220, 0), | |
| CHAN5G(48, 5240, 0), | |
| CHAN5G(52, 5260, 0), | |
| CHAN5G(56, 5280, 0), | |
| CHAN5G(60, 5300, 0), | |
| CHAN5G(64, 5320, 0), | |
| CHAN5G(100, 5500, 0), | |
| CHAN5G(104, 5520, 0), | |
| CHAN5G(108, 5540, 0), | |
| CHAN5G(112, 5560, 0), | |
| CHAN5G(116, 5580, 0), | |
| CHAN5G(120, 5600, 0), | |
| CHAN5G(124, 5620, 0), | |
| CHAN5G(128, 5640, 0), | |
| CHAN5G(132, 5660, 0), | |
| CHAN5G(136, 5680, 0), | |
| CHAN5G(140, 5700, 0), | |
| CHAN5G(144, 5720, 0), | |
| CHAN5G(149, 5745, 0), | |
| CHAN5G(153, 5765, 0), | |
| CHAN5G(157, 5785, 0), | |
| CHAN5G(161, 5805, 0), | |
| CHAN5G(165, 5825, 0), | |
| }; | |
| struct ath10k *ath10k_mac_create(size_t priv_size) | |
| { | |
| struct ieee80211_hw *hw; | |
| struct ath10k *ar; | |
| hw = ieee80211_alloc_hw(sizeof(struct ath10k) + priv_size, &ath10k_ops); | |
| if (!hw) | |
| return NULL; | |
| ar = hw->priv; | |
| ar->hw = hw; | |
| return ar; | |
| } | |
| void ath10k_mac_destroy(struct ath10k *ar) | |
| { | |
| ieee80211_free_hw(ar->hw); | |
| } | |
| static const struct ieee80211_iface_limit ath10k_if_limits[] = { | |
| { | |
| .max = 8, | |
| .types = BIT(NL80211_IFTYPE_STATION) | |
| | BIT(NL80211_IFTYPE_P2P_CLIENT) | |
| }, | |
| { | |
| .max = 3, | |
| .types = BIT(NL80211_IFTYPE_P2P_GO) | |
| }, | |
| { | |
| .max = 1, | |
| .types = BIT(NL80211_IFTYPE_P2P_DEVICE) | |
| }, | |
| { | |
| .max = 7, | |
| .types = BIT(NL80211_IFTYPE_AP) | |
| #ifdef CONFIG_MAC80211_MESH | |
| | BIT(NL80211_IFTYPE_MESH_POINT) | |
| #endif | |
| }, | |
| }; | |
| static const struct ieee80211_iface_limit ath10k_10x_if_limits[] = { | |
| { | |
| .max = 8, | |
| .types = BIT(NL80211_IFTYPE_AP) | |
| #ifdef CONFIG_MAC80211_MESH | |
| | BIT(NL80211_IFTYPE_MESH_POINT) | |
| #endif | |
| }, | |
| }; | |
| static const struct ieee80211_iface_combination ath10k_if_comb[] = { | |
| { | |
| .limits = ath10k_if_limits, | |
| .n_limits = ARRAY_SIZE(ath10k_if_limits), | |
| .max_interfaces = 8, | |
| .num_different_channels = 1, | |
| .beacon_int_infra_match = true, | |
| }, | |
| }; | |
| static const struct ieee80211_iface_combination ath10k_10x_if_comb[] = { | |
| { | |
| .limits = ath10k_10x_if_limits, | |
| .n_limits = ARRAY_SIZE(ath10k_10x_if_limits), | |
| .max_interfaces = 8, | |
| .num_different_channels = 1, | |
| .beacon_int_infra_match = true, | |
| #ifdef CONFIG_ATH10K_DFS_CERTIFIED | |
| .radar_detect_widths = BIT(NL80211_CHAN_WIDTH_20_NOHT) | | |
| BIT(NL80211_CHAN_WIDTH_20) | | |
| BIT(NL80211_CHAN_WIDTH_40) | | |
| BIT(NL80211_CHAN_WIDTH_80), | |
| #endif | |
| }, | |
| }; | |
| static const struct ieee80211_iface_limit ath10k_tlv_if_limit[] = { | |
| { | |
| .max = 2, | |
| .types = BIT(NL80211_IFTYPE_STATION), | |
| }, | |
| { | |
| .max = 2, | |
| .types = BIT(NL80211_IFTYPE_AP) | | |
| #ifdef CONFIG_MAC80211_MESH | |
| BIT(NL80211_IFTYPE_MESH_POINT) | | |
| #endif | |
| BIT(NL80211_IFTYPE_P2P_CLIENT) | | |
| BIT(NL80211_IFTYPE_P2P_GO), | |
| }, | |
| { | |
| .max = 1, | |
| .types = BIT(NL80211_IFTYPE_P2P_DEVICE), | |
| }, | |
| }; | |
| static const struct ieee80211_iface_limit ath10k_tlv_qcs_if_limit[] = { | |
| { | |
| .max = 2, | |
| .types = BIT(NL80211_IFTYPE_STATION), | |
| }, | |
| { | |
| .max = 2, | |
| .types = BIT(NL80211_IFTYPE_P2P_CLIENT), | |
| }, | |
| { | |
| .max = 1, | |
| .types = BIT(NL80211_IFTYPE_AP) | | |
| #ifdef CONFIG_MAC80211_MESH | |
| BIT(NL80211_IFTYPE_MESH_POINT) | | |
| #endif | |
| BIT(NL80211_IFTYPE_P2P_GO), | |
| }, | |
| { | |
| .max = 1, | |
| .types = BIT(NL80211_IFTYPE_P2P_DEVICE), | |
| }, | |
| }; | |
| static const struct ieee80211_iface_limit ath10k_tlv_if_limit_ibss[] = { | |
| { | |
| .max = 1, | |
| .types = BIT(NL80211_IFTYPE_STATION), | |
| }, | |
| { | |
| .max = 1, | |
| .types = BIT(NL80211_IFTYPE_ADHOC), | |
| }, | |
| }; | |
| /* FIXME: This is not thouroughly tested. These combinations may over- or | |
| * underestimate hw/fw capabilities. | |
| */ | |
| static struct ieee80211_iface_combination ath10k_tlv_if_comb[] = { | |
| { | |
| .limits = ath10k_tlv_if_limit, | |
| .num_different_channels = 1, | |
| .max_interfaces = 4, | |
| .n_limits = ARRAY_SIZE(ath10k_tlv_if_limit), | |
| }, | |
| { | |
| .limits = ath10k_tlv_if_limit_ibss, | |
| .num_different_channels = 1, | |
| .max_interfaces = 2, | |
| .n_limits = ARRAY_SIZE(ath10k_tlv_if_limit_ibss), | |
| }, | |
| }; | |
| static struct ieee80211_iface_combination ath10k_tlv_qcs_if_comb[] = { | |
| { | |
| .limits = ath10k_tlv_if_limit, | |
| .num_different_channels = 1, | |
| .max_interfaces = 4, | |
| .n_limits = ARRAY_SIZE(ath10k_tlv_if_limit), | |
| }, | |
| { | |
| .limits = ath10k_tlv_qcs_if_limit, | |
| .num_different_channels = 2, | |
| .max_interfaces = 4, | |
| .n_limits = ARRAY_SIZE(ath10k_tlv_qcs_if_limit), | |
| }, | |
| { | |
| .limits = ath10k_tlv_if_limit_ibss, | |
| .num_different_channels = 1, | |
| .max_interfaces = 2, | |
| .n_limits = ARRAY_SIZE(ath10k_tlv_if_limit_ibss), | |
| }, | |
| }; | |
| static const struct ieee80211_iface_limit ath10k_10_4_if_limits[] = { | |
| { | |
| .max = 1, | |
| .types = BIT(NL80211_IFTYPE_STATION), | |
| }, | |
| { | |
| .max = 16, | |
| .types = BIT(NL80211_IFTYPE_AP) | |
| #ifdef CONFIG_MAC80211_MESH | |
| | BIT(NL80211_IFTYPE_MESH_POINT) | |
| #endif | |
| }, | |
| }; | |
| static const struct ieee80211_iface_combination ath10k_10_4_if_comb[] = { | |
| { | |
| .limits = ath10k_10_4_if_limits, | |
| .n_limits = ARRAY_SIZE(ath10k_10_4_if_limits), | |
| .max_interfaces = 16, | |
| .num_different_channels = 1, | |
| .beacon_int_infra_match = true, | |
| #ifdef CONFIG_ATH10K_DFS_CERTIFIED | |
| .radar_detect_widths = BIT(NL80211_CHAN_WIDTH_20_NOHT) | | |
| BIT(NL80211_CHAN_WIDTH_20) | | |
| BIT(NL80211_CHAN_WIDTH_40) | | |
| BIT(NL80211_CHAN_WIDTH_80), | |
| #endif | |
| }, | |
| }; | |
| static void ath10k_get_arvif_iter(void *data, u8 *mac, | |
| struct ieee80211_vif *vif) | |
| { | |
| struct ath10k_vif_iter *arvif_iter = data; | |
| struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif); | |
| if (arvif->vdev_id == arvif_iter->vdev_id) | |
| arvif_iter->arvif = arvif; | |
| } | |
| struct ath10k_vif *ath10k_get_arvif(struct ath10k *ar, u32 vdev_id) | |
| { | |
| struct ath10k_vif_iter arvif_iter; | |
| u32 flags; | |
| memset(&arvif_iter, 0, sizeof(struct ath10k_vif_iter)); | |
| arvif_iter.vdev_id = vdev_id; | |
| flags = IEEE80211_IFACE_ITER_RESUME_ALL; | |
| ieee80211_iterate_active_interfaces_atomic(ar->hw, | |
| flags, | |
| ath10k_get_arvif_iter, | |
| &arvif_iter); | |
| if (!arvif_iter.arvif) { | |
| ath10k_warn(ar, "No VIF found for vdev %d\n", vdev_id); | |
| return NULL; | |
| } | |
| return arvif_iter.arvif; | |
| } | |
| int ath10k_mac_register(struct ath10k *ar) | |
| { | |
| static const u32 cipher_suites[] = { | |
| WLAN_CIPHER_SUITE_WEP40, | |
| WLAN_CIPHER_SUITE_WEP104, | |
| WLAN_CIPHER_SUITE_TKIP, | |
| WLAN_CIPHER_SUITE_CCMP, | |
| WLAN_CIPHER_SUITE_AES_CMAC, | |
| }; | |
| struct ieee80211_supported_band *band; | |
| void *channels; | |
| int ret; | |
| SET_IEEE80211_PERM_ADDR(ar->hw, ar->mac_addr); | |
| SET_IEEE80211_DEV(ar->hw, ar->dev); | |
| BUILD_BUG_ON((ARRAY_SIZE(ath10k_2ghz_channels) + | |
| ARRAY_SIZE(ath10k_5ghz_channels)) != | |
| ATH10K_NUM_CHANS); | |
| if (ar->phy_capability & WHAL_WLAN_11G_CAPABILITY) { | |
| channels = kmemdup(ath10k_2ghz_channels, | |
| sizeof(ath10k_2ghz_channels), | |
| GFP_KERNEL); | |
| if (!channels) { | |
| ret = -ENOMEM; | |
| goto err_free; | |
| } | |
| band = &ar->mac.sbands[IEEE80211_BAND_2GHZ]; | |
| band->n_channels = ARRAY_SIZE(ath10k_2ghz_channels); | |
| band->channels = channels; | |
| band->n_bitrates = ath10k_g_rates_size; | |
| band->bitrates = ath10k_g_rates; | |
| ar->hw->wiphy->bands[IEEE80211_BAND_2GHZ] = band; | |
| } | |
| if (ar->phy_capability & WHAL_WLAN_11A_CAPABILITY) { | |
| channels = kmemdup(ath10k_5ghz_channels, | |
| sizeof(ath10k_5ghz_channels), | |
| GFP_KERNEL); | |
| if (!channels) { | |
| ret = -ENOMEM; | |
| goto err_free; | |
| } | |
| band = &ar->mac.sbands[IEEE80211_BAND_5GHZ]; | |
| band->n_channels = ARRAY_SIZE(ath10k_5ghz_channels); | |
| band->channels = channels; | |
| band->n_bitrates = ath10k_a_rates_size; | |
| band->bitrates = ath10k_a_rates; | |
| ar->hw->wiphy->bands[IEEE80211_BAND_5GHZ] = band; | |
| } | |
| ath10k_mac_setup_ht_vht_cap(ar); | |
| ar->hw->wiphy->interface_modes = | |
| BIT(NL80211_IFTYPE_STATION) | | |
| BIT(NL80211_IFTYPE_AP) | | |
| BIT(NL80211_IFTYPE_MESH_POINT); | |
| ar->hw->wiphy->available_antennas_rx = ar->cfg_rx_chainmask; | |
| ar->hw->wiphy->available_antennas_tx = ar->cfg_tx_chainmask; | |
| if (!test_bit(ATH10K_FW_FEATURE_NO_P2P, ar->fw_features)) | |
| ar->hw->wiphy->interface_modes |= | |
| BIT(NL80211_IFTYPE_P2P_DEVICE) | | |
| BIT(NL80211_IFTYPE_P2P_CLIENT) | | |
| BIT(NL80211_IFTYPE_P2P_GO); | |
| ieee80211_hw_set(ar->hw, SIGNAL_DBM); | |
| ieee80211_hw_set(ar->hw, SUPPORTS_PS); | |
| ieee80211_hw_set(ar->hw, SUPPORTS_DYNAMIC_PS); | |
| ieee80211_hw_set(ar->hw, MFP_CAPABLE); | |
| ieee80211_hw_set(ar->hw, REPORTS_TX_ACK_STATUS); | |
| ieee80211_hw_set(ar->hw, HAS_RATE_CONTROL); | |
| ieee80211_hw_set(ar->hw, AP_LINK_PS); | |
| ieee80211_hw_set(ar->hw, SPECTRUM_MGMT); | |
| ieee80211_hw_set(ar->hw, SUPPORT_FAST_XMIT); | |
| ieee80211_hw_set(ar->hw, CONNECTION_MONITOR); | |
| ieee80211_hw_set(ar->hw, SUPPORTS_PER_STA_GTK); | |
| ieee80211_hw_set(ar->hw, WANT_MONITOR_VIF); | |
| ieee80211_hw_set(ar->hw, CHANCTX_STA_CSA); | |
| ieee80211_hw_set(ar->hw, QUEUE_CONTROL); | |
| if (!test_bit(ATH10K_FLAG_RAW_MODE, &ar->dev_flags)) | |
| ieee80211_hw_set(ar->hw, SW_CRYPTO_CONTROL); | |
| ar->hw->wiphy->features |= NL80211_FEATURE_STATIC_SMPS; | |
| ar->hw->wiphy->flags |= WIPHY_FLAG_IBSS_RSN; | |
| if (ar->ht_cap_info & WMI_HT_CAP_DYNAMIC_SMPS) | |
| ar->hw->wiphy->features |= NL80211_FEATURE_DYNAMIC_SMPS; | |
| if (ar->ht_cap_info & WMI_HT_CAP_ENABLED) { | |
| ieee80211_hw_set(ar->hw, AMPDU_AGGREGATION); | |
| ieee80211_hw_set(ar->hw, TX_AMPDU_SETUP_IN_HW); | |
| } | |
| ar->hw->wiphy->max_scan_ssids = WLAN_SCAN_PARAMS_MAX_SSID; | |
| ar->hw->wiphy->max_scan_ie_len = WLAN_SCAN_PARAMS_MAX_IE_LEN; | |
| ar->hw->vif_data_size = sizeof(struct ath10k_vif); | |
| ar->hw->sta_data_size = sizeof(struct ath10k_sta); | |
| ar->hw->max_listen_interval = ATH10K_MAX_HW_LISTEN_INTERVAL; | |
| if (test_bit(WMI_SERVICE_BEACON_OFFLOAD, ar->wmi.svc_map)) { | |
| ar->hw->wiphy->flags |= WIPHY_FLAG_AP_PROBE_RESP_OFFLOAD; | |
| /* Firmware delivers WPS/P2P Probe Requests frames to driver so | |
| * that userspace (e.g. wpa_supplicant/hostapd) can generate | |
| * correct Probe Responses. This is more of a hack advert.. | |
| */ | |
| ar->hw->wiphy->probe_resp_offload |= | |
| NL80211_PROBE_RESP_OFFLOAD_SUPPORT_WPS | | |
| NL80211_PROBE_RESP_OFFLOAD_SUPPORT_WPS2 | | |
| NL80211_PROBE_RESP_OFFLOAD_SUPPORT_P2P; | |
| } | |
| if (test_bit(WMI_SERVICE_TDLS, ar->wmi.svc_map)) | |
| ar->hw->wiphy->flags |= WIPHY_FLAG_SUPPORTS_TDLS; | |
| ar->hw->wiphy->flags |= WIPHY_FLAG_HAS_REMAIN_ON_CHANNEL; | |
| ar->hw->wiphy->flags |= WIPHY_FLAG_HAS_CHANNEL_SWITCH; | |
| ar->hw->wiphy->max_remain_on_channel_duration = 5000; | |
| ar->hw->wiphy->flags |= WIPHY_FLAG_AP_UAPSD; | |
| ar->hw->wiphy->features |= NL80211_FEATURE_AP_MODE_CHAN_WIDTH_CHANGE; | |
| ar->hw->wiphy->max_ap_assoc_sta = ar->max_num_stations; | |
| ret = ath10k_wow_init(ar); | |
| if (ret) { | |
| ath10k_warn(ar, "failed to init wow: %d\n", ret); | |
| goto err_free; | |
| } | |
| wiphy_ext_feature_set(ar->hw->wiphy, NL80211_EXT_FEATURE_VHT_IBSS); | |
| /* | |
| * on LL hardware queues are managed entirely by the FW | |
| * so we only advertise to mac we can do the queues thing | |
| */ | |
| ar->hw->queues = IEEE80211_MAX_QUEUES; | |
| /* vdev_ids are used as hw queue numbers. Make sure offchan tx queue is | |
| * something that vdev_ids can't reach so that we don't stop the queue | |
| * accidentally. | |
| */ | |
| ar->hw->offchannel_tx_hw_queue = IEEE80211_MAX_QUEUES - 1; | |
| switch (ar->wmi.op_version) { | |
| case ATH10K_FW_WMI_OP_VERSION_MAIN: | |
| ar->hw->wiphy->iface_combinations = ath10k_if_comb; | |
| ar->hw->wiphy->n_iface_combinations = | |
| ARRAY_SIZE(ath10k_if_comb); | |
| ar->hw->wiphy->interface_modes |= BIT(NL80211_IFTYPE_ADHOC); | |
| break; | |
| case ATH10K_FW_WMI_OP_VERSION_TLV: | |
| if (test_bit(WMI_SERVICE_ADAPTIVE_OCS, ar->wmi.svc_map)) { | |
| ar->hw->wiphy->iface_combinations = | |
| ath10k_tlv_qcs_if_comb; | |
| ar->hw->wiphy->n_iface_combinations = | |
| ARRAY_SIZE(ath10k_tlv_qcs_if_comb); | |
| } else { | |
| ar->hw->wiphy->iface_combinations = ath10k_tlv_if_comb; | |
| ar->hw->wiphy->n_iface_combinations = | |
| ARRAY_SIZE(ath10k_tlv_if_comb); | |
| } | |
| ar->hw->wiphy->interface_modes |= BIT(NL80211_IFTYPE_ADHOC); | |
| break; | |
| case ATH10K_FW_WMI_OP_VERSION_10_1: | |
| case ATH10K_FW_WMI_OP_VERSION_10_2: | |
| case ATH10K_FW_WMI_OP_VERSION_10_2_4: | |
| ar->hw->wiphy->iface_combinations = ath10k_10x_if_comb; | |
| ar->hw->wiphy->n_iface_combinations = | |
| ARRAY_SIZE(ath10k_10x_if_comb); | |
| break; | |
| case ATH10K_FW_WMI_OP_VERSION_10_4: | |
| ar->hw->wiphy->iface_combinations = ath10k_10_4_if_comb; | |
| ar->hw->wiphy->n_iface_combinations = | |
| ARRAY_SIZE(ath10k_10_4_if_comb); | |
| break; | |
| case ATH10K_FW_WMI_OP_VERSION_UNSET: | |
| case ATH10K_FW_WMI_OP_VERSION_MAX: | |
| WARN_ON(1); | |
| ret = -EINVAL; | |
| goto err_free; | |
| } | |
| if (!test_bit(ATH10K_FLAG_RAW_MODE, &ar->dev_flags)) | |
| ar->hw->netdev_features = NETIF_F_HW_CSUM; | |
| if (config_enabled(CONFIG_ATH10K_DFS_CERTIFIED)) { | |
| /* Init ath dfs pattern detector */ | |
| ar->ath_common.debug_mask = ATH_DBG_DFS; | |
| ar->dfs_detector = dfs_pattern_detector_init(&ar->ath_common, | |
| NL80211_DFS_UNSET); | |
| if (!ar->dfs_detector) | |
| ath10k_warn(ar, "failed to initialise DFS pattern detector\n"); | |
| } | |
| ret = ath_regd_init(&ar->ath_common.regulatory, ar->hw->wiphy, | |
| ath10k_reg_notifier); | |
| if (ret) { | |
| ath10k_err(ar, "failed to initialise regulatory: %i\n", ret); | |
| goto err_dfs_detector_exit; | |
| } | |
| ar->hw->wiphy->cipher_suites = cipher_suites; | |
| ar->hw->wiphy->n_cipher_suites = ARRAY_SIZE(cipher_suites); | |
| ret = ieee80211_register_hw(ar->hw); | |
| if (ret) { | |
| ath10k_err(ar, "failed to register ieee80211: %d\n", ret); | |
| goto err_dfs_detector_exit; | |
| } | |
| if (!ath_is_world_regd(&ar->ath_common.regulatory)) { | |
| ret = regulatory_hint(ar->hw->wiphy, | |
| ar->ath_common.regulatory.alpha2); | |
| if (ret) | |
| goto err_unregister; | |
| } | |
| return 0; | |
| err_unregister: | |
| ieee80211_unregister_hw(ar->hw); | |
| err_dfs_detector_exit: | |
| if (config_enabled(CONFIG_ATH10K_DFS_CERTIFIED) && ar->dfs_detector) | |
| ar->dfs_detector->exit(ar->dfs_detector); | |
| err_free: | |
| kfree(ar->mac.sbands[IEEE80211_BAND_2GHZ].channels); | |
| kfree(ar->mac.sbands[IEEE80211_BAND_5GHZ].channels); | |
| SET_IEEE80211_DEV(ar->hw, NULL); | |
| return ret; | |
| } | |
| void ath10k_mac_unregister(struct ath10k *ar) | |
| { | |
| ieee80211_unregister_hw(ar->hw); | |
| if (config_enabled(CONFIG_ATH10K_DFS_CERTIFIED) && ar->dfs_detector) | |
| ar->dfs_detector->exit(ar->dfs_detector); | |
| kfree(ar->mac.sbands[IEEE80211_BAND_2GHZ].channels); | |
| kfree(ar->mac.sbands[IEEE80211_BAND_5GHZ].channels); | |
| SET_IEEE80211_DEV(ar->hw, NULL); | |
| } |