| /* | |
| * | |
| * Broadcom B43legacy wireless driver | |
| * | |
| * Copyright (c) 2005 Martin Langer <martin-langer@gmx.de> | |
| * Copyright (c) 2005-2008 Stefano Brivio <stefano.brivio@polimi.it> | |
| * Copyright (c) 2005, 2006 Michael Buesch <m@bues.ch> | |
| * Copyright (c) 2005 Danny van Dyk <kugelfang@gentoo.org> | |
| * Copyright (c) 2005 Andreas Jaggi <andreas.jaggi@waterwave.ch> | |
| * Copyright (c) 2007 Larry Finger <Larry.Finger@lwfinger.net> | |
| * | |
| * Some parts of the code in this file are derived from the ipw2200 | |
| * driver Copyright(c) 2003 - 2004 Intel Corporation. | |
| * This program is free software; you can redistribute it and/or modify | |
| * it under the terms of the GNU General Public License as published by | |
| * the Free Software Foundation; either version 2 of the License, or | |
| * (at your option) any later version. | |
| * | |
| * This program is distributed in the hope that it will be useful, | |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| * GNU General Public License for more details. | |
| * | |
| * You should have received a copy of the GNU General Public License | |
| * along with this program; see the file COPYING. If not, write to | |
| * the Free Software Foundation, Inc., 51 Franklin Steet, Fifth Floor, | |
| * Boston, MA 02110-1301, USA. | |
| * | |
| */ | |
| #include <linux/delay.h> | |
| #include <linux/init.h> | |
| #include <linux/module.h> | |
| #include <linux/if_arp.h> | |
| #include <linux/etherdevice.h> | |
| #include <linux/firmware.h> | |
| #include <linux/workqueue.h> | |
| #include <linux/sched.h> | |
| #include <linux/skbuff.h> | |
| #include <linux/dma-mapping.h> | |
| #include <linux/slab.h> | |
| #include <net/dst.h> | |
| #include <asm/unaligned.h> | |
| #include "b43legacy.h" | |
| #include "main.h" | |
| #include "debugfs.h" | |
| #include "phy.h" | |
| #include "dma.h" | |
| #include "pio.h" | |
| #include "sysfs.h" | |
| #include "xmit.h" | |
| #include "radio.h" | |
| MODULE_DESCRIPTION("Broadcom B43legacy wireless driver"); | |
| MODULE_AUTHOR("Martin Langer"); | |
| MODULE_AUTHOR("Stefano Brivio"); | |
| MODULE_AUTHOR("Michael Buesch"); | |
| MODULE_LICENSE("GPL"); | |
| MODULE_FIRMWARE("b43legacy/ucode2.fw"); | |
| MODULE_FIRMWARE("b43legacy/ucode4.fw"); | |
| #if defined(CONFIG_B43LEGACY_DMA) && defined(CONFIG_B43LEGACY_PIO) | |
| static int modparam_pio; | |
| module_param_named(pio, modparam_pio, int, 0444); | |
| MODULE_PARM_DESC(pio, "enable(1) / disable(0) PIO mode"); | |
| #elif defined(CONFIG_B43LEGACY_DMA) | |
| # define modparam_pio 0 | |
| #elif defined(CONFIG_B43LEGACY_PIO) | |
| # define modparam_pio 1 | |
| #endif | |
| static int modparam_bad_frames_preempt; | |
| module_param_named(bad_frames_preempt, modparam_bad_frames_preempt, int, 0444); | |
| MODULE_PARM_DESC(bad_frames_preempt, "enable(1) / disable(0) Bad Frames" | |
| " Preemption"); | |
| static char modparam_fwpostfix[16]; | |
| module_param_string(fwpostfix, modparam_fwpostfix, 16, 0444); | |
| MODULE_PARM_DESC(fwpostfix, "Postfix for the firmware files to load."); | |
| /* The following table supports BCM4301, BCM4303 and BCM4306/2 devices. */ | |
| static const struct ssb_device_id b43legacy_ssb_tbl[] = { | |
| SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_80211, 2), | |
| SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_80211, 4), | |
| {}, | |
| }; | |
| MODULE_DEVICE_TABLE(ssb, b43legacy_ssb_tbl); | |
| /* Channel and ratetables are shared for all devices. | |
| * They can't be const, because ieee80211 puts some precalculated | |
| * data in there. This data is the same for all devices, so we don't | |
| * get concurrency issues */ | |
| #define RATETAB_ENT(_rateid, _flags) \ | |
| { \ | |
| .bitrate = B43legacy_RATE_TO_100KBPS(_rateid), \ | |
| .hw_value = (_rateid), \ | |
| .flags = (_flags), \ | |
| } | |
| /* | |
| * NOTE: When changing this, sync with xmit.c's | |
| * b43legacy_plcp_get_bitrate_idx_* functions! | |
| */ | |
| static struct ieee80211_rate __b43legacy_ratetable[] = { | |
| RATETAB_ENT(B43legacy_CCK_RATE_1MB, 0), | |
| RATETAB_ENT(B43legacy_CCK_RATE_2MB, IEEE80211_RATE_SHORT_PREAMBLE), | |
| RATETAB_ENT(B43legacy_CCK_RATE_5MB, IEEE80211_RATE_SHORT_PREAMBLE), | |
| RATETAB_ENT(B43legacy_CCK_RATE_11MB, IEEE80211_RATE_SHORT_PREAMBLE), | |
| RATETAB_ENT(B43legacy_OFDM_RATE_6MB, 0), | |
| RATETAB_ENT(B43legacy_OFDM_RATE_9MB, 0), | |
| RATETAB_ENT(B43legacy_OFDM_RATE_12MB, 0), | |
| RATETAB_ENT(B43legacy_OFDM_RATE_18MB, 0), | |
| RATETAB_ENT(B43legacy_OFDM_RATE_24MB, 0), | |
| RATETAB_ENT(B43legacy_OFDM_RATE_36MB, 0), | |
| RATETAB_ENT(B43legacy_OFDM_RATE_48MB, 0), | |
| RATETAB_ENT(B43legacy_OFDM_RATE_54MB, 0), | |
| }; | |
| #define b43legacy_b_ratetable (__b43legacy_ratetable + 0) | |
| #define b43legacy_b_ratetable_size 4 | |
| #define b43legacy_g_ratetable (__b43legacy_ratetable + 0) | |
| #define b43legacy_g_ratetable_size 12 | |
| #define CHANTAB_ENT(_chanid, _freq) \ | |
| { \ | |
| .center_freq = (_freq), \ | |
| .hw_value = (_chanid), \ | |
| } | |
| static struct ieee80211_channel b43legacy_bg_chantable[] = { | |
| CHANTAB_ENT(1, 2412), | |
| CHANTAB_ENT(2, 2417), | |
| CHANTAB_ENT(3, 2422), | |
| CHANTAB_ENT(4, 2427), | |
| CHANTAB_ENT(5, 2432), | |
| CHANTAB_ENT(6, 2437), | |
| CHANTAB_ENT(7, 2442), | |
| CHANTAB_ENT(8, 2447), | |
| CHANTAB_ENT(9, 2452), | |
| CHANTAB_ENT(10, 2457), | |
| CHANTAB_ENT(11, 2462), | |
| CHANTAB_ENT(12, 2467), | |
| CHANTAB_ENT(13, 2472), | |
| CHANTAB_ENT(14, 2484), | |
| }; | |
| static struct ieee80211_supported_band b43legacy_band_2GHz_BPHY = { | |
| .channels = b43legacy_bg_chantable, | |
| .n_channels = ARRAY_SIZE(b43legacy_bg_chantable), | |
| .bitrates = b43legacy_b_ratetable, | |
| .n_bitrates = b43legacy_b_ratetable_size, | |
| }; | |
| static struct ieee80211_supported_band b43legacy_band_2GHz_GPHY = { | |
| .channels = b43legacy_bg_chantable, | |
| .n_channels = ARRAY_SIZE(b43legacy_bg_chantable), | |
| .bitrates = b43legacy_g_ratetable, | |
| .n_bitrates = b43legacy_g_ratetable_size, | |
| }; | |
| static void b43legacy_wireless_core_exit(struct b43legacy_wldev *dev); | |
| static int b43legacy_wireless_core_init(struct b43legacy_wldev *dev); | |
| static void b43legacy_wireless_core_stop(struct b43legacy_wldev *dev); | |
| static int b43legacy_wireless_core_start(struct b43legacy_wldev *dev); | |
| static int b43legacy_ratelimit(struct b43legacy_wl *wl) | |
| { | |
| if (!wl || !wl->current_dev) | |
| return 1; | |
| if (b43legacy_status(wl->current_dev) < B43legacy_STAT_STARTED) | |
| return 1; | |
| /* We are up and running. | |
| * Ratelimit the messages to avoid DoS over the net. */ | |
| return net_ratelimit(); | |
| } | |
| void b43legacyinfo(struct b43legacy_wl *wl, const char *fmt, ...) | |
| { | |
| struct va_format vaf; | |
| va_list args; | |
| if (!b43legacy_ratelimit(wl)) | |
| return; | |
| va_start(args, fmt); | |
| vaf.fmt = fmt; | |
| vaf.va = &args; | |
| printk(KERN_INFO "b43legacy-%s: %pV", | |
| (wl && wl->hw) ? wiphy_name(wl->hw->wiphy) : "wlan", &vaf); | |
| va_end(args); | |
| } | |
| void b43legacyerr(struct b43legacy_wl *wl, const char *fmt, ...) | |
| { | |
| struct va_format vaf; | |
| va_list args; | |
| if (!b43legacy_ratelimit(wl)) | |
| return; | |
| va_start(args, fmt); | |
| vaf.fmt = fmt; | |
| vaf.va = &args; | |
| printk(KERN_ERR "b43legacy-%s ERROR: %pV", | |
| (wl && wl->hw) ? wiphy_name(wl->hw->wiphy) : "wlan", &vaf); | |
| va_end(args); | |
| } | |
| void b43legacywarn(struct b43legacy_wl *wl, const char *fmt, ...) | |
| { | |
| struct va_format vaf; | |
| va_list args; | |
| if (!b43legacy_ratelimit(wl)) | |
| return; | |
| va_start(args, fmt); | |
| vaf.fmt = fmt; | |
| vaf.va = &args; | |
| printk(KERN_WARNING "b43legacy-%s warning: %pV", | |
| (wl && wl->hw) ? wiphy_name(wl->hw->wiphy) : "wlan", &vaf); | |
| va_end(args); | |
| } | |
| #if B43legacy_DEBUG | |
| void b43legacydbg(struct b43legacy_wl *wl, const char *fmt, ...) | |
| { | |
| struct va_format vaf; | |
| va_list args; | |
| va_start(args, fmt); | |
| vaf.fmt = fmt; | |
| vaf.va = &args; | |
| printk(KERN_DEBUG "b43legacy-%s debug: %pV", | |
| (wl && wl->hw) ? wiphy_name(wl->hw->wiphy) : "wlan", &vaf); | |
| va_end(args); | |
| } | |
| #endif /* DEBUG */ | |
| static void b43legacy_ram_write(struct b43legacy_wldev *dev, u16 offset, | |
| u32 val) | |
| { | |
| u32 status; | |
| B43legacy_WARN_ON(offset % 4 != 0); | |
| status = b43legacy_read32(dev, B43legacy_MMIO_MACCTL); | |
| if (status & B43legacy_MACCTL_BE) | |
| val = swab32(val); | |
| b43legacy_write32(dev, B43legacy_MMIO_RAM_CONTROL, offset); | |
| mmiowb(); | |
| b43legacy_write32(dev, B43legacy_MMIO_RAM_DATA, val); | |
| } | |
| static inline | |
| void b43legacy_shm_control_word(struct b43legacy_wldev *dev, | |
| u16 routing, u16 offset) | |
| { | |
| u32 control; | |
| /* "offset" is the WORD offset. */ | |
| control = routing; | |
| control <<= 16; | |
| control |= offset; | |
| b43legacy_write32(dev, B43legacy_MMIO_SHM_CONTROL, control); | |
| } | |
| u32 b43legacy_shm_read32(struct b43legacy_wldev *dev, | |
| u16 routing, u16 offset) | |
| { | |
| u32 ret; | |
| if (routing == B43legacy_SHM_SHARED) { | |
| B43legacy_WARN_ON((offset & 0x0001) != 0); | |
| if (offset & 0x0003) { | |
| /* Unaligned access */ | |
| b43legacy_shm_control_word(dev, routing, offset >> 2); | |
| ret = b43legacy_read16(dev, | |
| B43legacy_MMIO_SHM_DATA_UNALIGNED); | |
| ret <<= 16; | |
| b43legacy_shm_control_word(dev, routing, | |
| (offset >> 2) + 1); | |
| ret |= b43legacy_read16(dev, B43legacy_MMIO_SHM_DATA); | |
| return ret; | |
| } | |
| offset >>= 2; | |
| } | |
| b43legacy_shm_control_word(dev, routing, offset); | |
| ret = b43legacy_read32(dev, B43legacy_MMIO_SHM_DATA); | |
| return ret; | |
| } | |
| u16 b43legacy_shm_read16(struct b43legacy_wldev *dev, | |
| u16 routing, u16 offset) | |
| { | |
| u16 ret; | |
| if (routing == B43legacy_SHM_SHARED) { | |
| B43legacy_WARN_ON((offset & 0x0001) != 0); | |
| if (offset & 0x0003) { | |
| /* Unaligned access */ | |
| b43legacy_shm_control_word(dev, routing, offset >> 2); | |
| ret = b43legacy_read16(dev, | |
| B43legacy_MMIO_SHM_DATA_UNALIGNED); | |
| return ret; | |
| } | |
| offset >>= 2; | |
| } | |
| b43legacy_shm_control_word(dev, routing, offset); | |
| ret = b43legacy_read16(dev, B43legacy_MMIO_SHM_DATA); | |
| return ret; | |
| } | |
| void b43legacy_shm_write32(struct b43legacy_wldev *dev, | |
| u16 routing, u16 offset, | |
| u32 value) | |
| { | |
| if (routing == B43legacy_SHM_SHARED) { | |
| B43legacy_WARN_ON((offset & 0x0001) != 0); | |
| if (offset & 0x0003) { | |
| /* Unaligned access */ | |
| b43legacy_shm_control_word(dev, routing, offset >> 2); | |
| mmiowb(); | |
| b43legacy_write16(dev, | |
| B43legacy_MMIO_SHM_DATA_UNALIGNED, | |
| (value >> 16) & 0xffff); | |
| mmiowb(); | |
| b43legacy_shm_control_word(dev, routing, | |
| (offset >> 2) + 1); | |
| mmiowb(); | |
| b43legacy_write16(dev, B43legacy_MMIO_SHM_DATA, | |
| value & 0xffff); | |
| return; | |
| } | |
| offset >>= 2; | |
| } | |
| b43legacy_shm_control_word(dev, routing, offset); | |
| mmiowb(); | |
| b43legacy_write32(dev, B43legacy_MMIO_SHM_DATA, value); | |
| } | |
| void b43legacy_shm_write16(struct b43legacy_wldev *dev, u16 routing, u16 offset, | |
| u16 value) | |
| { | |
| if (routing == B43legacy_SHM_SHARED) { | |
| B43legacy_WARN_ON((offset & 0x0001) != 0); | |
| if (offset & 0x0003) { | |
| /* Unaligned access */ | |
| b43legacy_shm_control_word(dev, routing, offset >> 2); | |
| mmiowb(); | |
| b43legacy_write16(dev, | |
| B43legacy_MMIO_SHM_DATA_UNALIGNED, | |
| value); | |
| return; | |
| } | |
| offset >>= 2; | |
| } | |
| b43legacy_shm_control_word(dev, routing, offset); | |
| mmiowb(); | |
| b43legacy_write16(dev, B43legacy_MMIO_SHM_DATA, value); | |
| } | |
| /* Read HostFlags */ | |
| u32 b43legacy_hf_read(struct b43legacy_wldev *dev) | |
| { | |
| u32 ret; | |
| ret = b43legacy_shm_read16(dev, B43legacy_SHM_SHARED, | |
| B43legacy_SHM_SH_HOSTFHI); | |
| ret <<= 16; | |
| ret |= b43legacy_shm_read16(dev, B43legacy_SHM_SHARED, | |
| B43legacy_SHM_SH_HOSTFLO); | |
| return ret; | |
| } | |
| /* Write HostFlags */ | |
| void b43legacy_hf_write(struct b43legacy_wldev *dev, u32 value) | |
| { | |
| b43legacy_shm_write16(dev, B43legacy_SHM_SHARED, | |
| B43legacy_SHM_SH_HOSTFLO, | |
| (value & 0x0000FFFF)); | |
| b43legacy_shm_write16(dev, B43legacy_SHM_SHARED, | |
| B43legacy_SHM_SH_HOSTFHI, | |
| ((value & 0xFFFF0000) >> 16)); | |
| } | |
| void b43legacy_tsf_read(struct b43legacy_wldev *dev, u64 *tsf) | |
| { | |
| /* We need to be careful. As we read the TSF from multiple | |
| * registers, we should take care of register overflows. | |
| * In theory, the whole tsf read process should be atomic. | |
| * We try to be atomic here, by restaring the read process, | |
| * if any of the high registers changed (overflew). | |
| */ | |
| if (dev->dev->id.revision >= 3) { | |
| u32 low; | |
| u32 high; | |
| u32 high2; | |
| do { | |
| high = b43legacy_read32(dev, | |
| B43legacy_MMIO_REV3PLUS_TSF_HIGH); | |
| low = b43legacy_read32(dev, | |
| B43legacy_MMIO_REV3PLUS_TSF_LOW); | |
| high2 = b43legacy_read32(dev, | |
| B43legacy_MMIO_REV3PLUS_TSF_HIGH); | |
| } while (unlikely(high != high2)); | |
| *tsf = high; | |
| *tsf <<= 32; | |
| *tsf |= low; | |
| } else { | |
| u64 tmp; | |
| u16 v0; | |
| u16 v1; | |
| u16 v2; | |
| u16 v3; | |
| u16 test1; | |
| u16 test2; | |
| u16 test3; | |
| do { | |
| v3 = b43legacy_read16(dev, B43legacy_MMIO_TSF_3); | |
| v2 = b43legacy_read16(dev, B43legacy_MMIO_TSF_2); | |
| v1 = b43legacy_read16(dev, B43legacy_MMIO_TSF_1); | |
| v0 = b43legacy_read16(dev, B43legacy_MMIO_TSF_0); | |
| test3 = b43legacy_read16(dev, B43legacy_MMIO_TSF_3); | |
| test2 = b43legacy_read16(dev, B43legacy_MMIO_TSF_2); | |
| test1 = b43legacy_read16(dev, B43legacy_MMIO_TSF_1); | |
| } while (v3 != test3 || v2 != test2 || v1 != test1); | |
| *tsf = v3; | |
| *tsf <<= 48; | |
| tmp = v2; | |
| tmp <<= 32; | |
| *tsf |= tmp; | |
| tmp = v1; | |
| tmp <<= 16; | |
| *tsf |= tmp; | |
| *tsf |= v0; | |
| } | |
| } | |
| static void b43legacy_time_lock(struct b43legacy_wldev *dev) | |
| { | |
| u32 status; | |
| status = b43legacy_read32(dev, B43legacy_MMIO_MACCTL); | |
| status |= B43legacy_MACCTL_TBTTHOLD; | |
| b43legacy_write32(dev, B43legacy_MMIO_MACCTL, status); | |
| mmiowb(); | |
| } | |
| static void b43legacy_time_unlock(struct b43legacy_wldev *dev) | |
| { | |
| u32 status; | |
| status = b43legacy_read32(dev, B43legacy_MMIO_MACCTL); | |
| status &= ~B43legacy_MACCTL_TBTTHOLD; | |
| b43legacy_write32(dev, B43legacy_MMIO_MACCTL, status); | |
| } | |
| static void b43legacy_tsf_write_locked(struct b43legacy_wldev *dev, u64 tsf) | |
| { | |
| /* Be careful with the in-progress timer. | |
| * First zero out the low register, so we have a full | |
| * register-overflow duration to complete the operation. | |
| */ | |
| if (dev->dev->id.revision >= 3) { | |
| u32 lo = (tsf & 0x00000000FFFFFFFFULL); | |
| u32 hi = (tsf & 0xFFFFFFFF00000000ULL) >> 32; | |
| b43legacy_write32(dev, B43legacy_MMIO_REV3PLUS_TSF_LOW, 0); | |
| mmiowb(); | |
| b43legacy_write32(dev, B43legacy_MMIO_REV3PLUS_TSF_HIGH, | |
| hi); | |
| mmiowb(); | |
| b43legacy_write32(dev, B43legacy_MMIO_REV3PLUS_TSF_LOW, | |
| lo); | |
| } else { | |
| u16 v0 = (tsf & 0x000000000000FFFFULL); | |
| u16 v1 = (tsf & 0x00000000FFFF0000ULL) >> 16; | |
| u16 v2 = (tsf & 0x0000FFFF00000000ULL) >> 32; | |
| u16 v3 = (tsf & 0xFFFF000000000000ULL) >> 48; | |
| b43legacy_write16(dev, B43legacy_MMIO_TSF_0, 0); | |
| mmiowb(); | |
| b43legacy_write16(dev, B43legacy_MMIO_TSF_3, v3); | |
| mmiowb(); | |
| b43legacy_write16(dev, B43legacy_MMIO_TSF_2, v2); | |
| mmiowb(); | |
| b43legacy_write16(dev, B43legacy_MMIO_TSF_1, v1); | |
| mmiowb(); | |
| b43legacy_write16(dev, B43legacy_MMIO_TSF_0, v0); | |
| } | |
| } | |
| void b43legacy_tsf_write(struct b43legacy_wldev *dev, u64 tsf) | |
| { | |
| b43legacy_time_lock(dev); | |
| b43legacy_tsf_write_locked(dev, tsf); | |
| b43legacy_time_unlock(dev); | |
| } | |
| static | |
| void b43legacy_macfilter_set(struct b43legacy_wldev *dev, | |
| u16 offset, const u8 *mac) | |
| { | |
| static const u8 zero_addr[ETH_ALEN] = { 0 }; | |
| u16 data; | |
| if (!mac) | |
| mac = zero_addr; | |
| offset |= 0x0020; | |
| b43legacy_write16(dev, B43legacy_MMIO_MACFILTER_CONTROL, offset); | |
| data = mac[0]; | |
| data |= mac[1] << 8; | |
| b43legacy_write16(dev, B43legacy_MMIO_MACFILTER_DATA, data); | |
| data = mac[2]; | |
| data |= mac[3] << 8; | |
| b43legacy_write16(dev, B43legacy_MMIO_MACFILTER_DATA, data); | |
| data = mac[4]; | |
| data |= mac[5] << 8; | |
| b43legacy_write16(dev, B43legacy_MMIO_MACFILTER_DATA, data); | |
| } | |
| static void b43legacy_write_mac_bssid_templates(struct b43legacy_wldev *dev) | |
| { | |
| static const u8 zero_addr[ETH_ALEN] = { 0 }; | |
| const u8 *mac = dev->wl->mac_addr; | |
| const u8 *bssid = dev->wl->bssid; | |
| u8 mac_bssid[ETH_ALEN * 2]; | |
| int i; | |
| u32 tmp; | |
| if (!bssid) | |
| bssid = zero_addr; | |
| if (!mac) | |
| mac = zero_addr; | |
| b43legacy_macfilter_set(dev, B43legacy_MACFILTER_BSSID, bssid); | |
| memcpy(mac_bssid, mac, ETH_ALEN); | |
| memcpy(mac_bssid + ETH_ALEN, bssid, ETH_ALEN); | |
| /* Write our MAC address and BSSID to template ram */ | |
| for (i = 0; i < ARRAY_SIZE(mac_bssid); i += sizeof(u32)) { | |
| tmp = (u32)(mac_bssid[i + 0]); | |
| tmp |= (u32)(mac_bssid[i + 1]) << 8; | |
| tmp |= (u32)(mac_bssid[i + 2]) << 16; | |
| tmp |= (u32)(mac_bssid[i + 3]) << 24; | |
| b43legacy_ram_write(dev, 0x20 + i, tmp); | |
| b43legacy_ram_write(dev, 0x78 + i, tmp); | |
| b43legacy_ram_write(dev, 0x478 + i, tmp); | |
| } | |
| } | |
| static void b43legacy_upload_card_macaddress(struct b43legacy_wldev *dev) | |
| { | |
| b43legacy_write_mac_bssid_templates(dev); | |
| b43legacy_macfilter_set(dev, B43legacy_MACFILTER_SELF, | |
| dev->wl->mac_addr); | |
| } | |
| static void b43legacy_set_slot_time(struct b43legacy_wldev *dev, | |
| u16 slot_time) | |
| { | |
| /* slot_time is in usec. */ | |
| if (dev->phy.type != B43legacy_PHYTYPE_G) | |
| return; | |
| b43legacy_write16(dev, 0x684, 510 + slot_time); | |
| b43legacy_shm_write16(dev, B43legacy_SHM_SHARED, 0x0010, | |
| slot_time); | |
| } | |
| static void b43legacy_short_slot_timing_enable(struct b43legacy_wldev *dev) | |
| { | |
| b43legacy_set_slot_time(dev, 9); | |
| } | |
| static void b43legacy_short_slot_timing_disable(struct b43legacy_wldev *dev) | |
| { | |
| b43legacy_set_slot_time(dev, 20); | |
| } | |
| /* Synchronize IRQ top- and bottom-half. | |
| * IRQs must be masked before calling this. | |
| * This must not be called with the irq_lock held. | |
| */ | |
| static void b43legacy_synchronize_irq(struct b43legacy_wldev *dev) | |
| { | |
| synchronize_irq(dev->dev->irq); | |
| tasklet_kill(&dev->isr_tasklet); | |
| } | |
| /* DummyTransmission function, as documented on | |
| * http://bcm-specs.sipsolutions.net/DummyTransmission | |
| */ | |
| void b43legacy_dummy_transmission(struct b43legacy_wldev *dev) | |
| { | |
| struct b43legacy_phy *phy = &dev->phy; | |
| unsigned int i; | |
| unsigned int max_loop; | |
| u16 value; | |
| u32 buffer[5] = { | |
| 0x00000000, | |
| 0x00D40000, | |
| 0x00000000, | |
| 0x01000000, | |
| 0x00000000, | |
| }; | |
| switch (phy->type) { | |
| case B43legacy_PHYTYPE_B: | |
| case B43legacy_PHYTYPE_G: | |
| max_loop = 0xFA; | |
| buffer[0] = 0x000B846E; | |
| break; | |
| default: | |
| B43legacy_BUG_ON(1); | |
| return; | |
| } | |
| for (i = 0; i < 5; i++) | |
| b43legacy_ram_write(dev, i * 4, buffer[i]); | |
| /* dummy read follows */ | |
| b43legacy_read32(dev, B43legacy_MMIO_MACCTL); | |
| b43legacy_write16(dev, 0x0568, 0x0000); | |
| b43legacy_write16(dev, 0x07C0, 0x0000); | |
| b43legacy_write16(dev, 0x050C, 0x0000); | |
| b43legacy_write16(dev, 0x0508, 0x0000); | |
| b43legacy_write16(dev, 0x050A, 0x0000); | |
| b43legacy_write16(dev, 0x054C, 0x0000); | |
| b43legacy_write16(dev, 0x056A, 0x0014); | |
| b43legacy_write16(dev, 0x0568, 0x0826); | |
| b43legacy_write16(dev, 0x0500, 0x0000); | |
| b43legacy_write16(dev, 0x0502, 0x0030); | |
| if (phy->radio_ver == 0x2050 && phy->radio_rev <= 0x5) | |
| b43legacy_radio_write16(dev, 0x0051, 0x0017); | |
| for (i = 0x00; i < max_loop; i++) { | |
| value = b43legacy_read16(dev, 0x050E); | |
| if (value & 0x0080) | |
| break; | |
| udelay(10); | |
| } | |
| for (i = 0x00; i < 0x0A; i++) { | |
| value = b43legacy_read16(dev, 0x050E); | |
| if (value & 0x0400) | |
| break; | |
| udelay(10); | |
| } | |
| for (i = 0x00; i < 0x0A; i++) { | |
| value = b43legacy_read16(dev, 0x0690); | |
| if (!(value & 0x0100)) | |
| break; | |
| udelay(10); | |
| } | |
| if (phy->radio_ver == 0x2050 && phy->radio_rev <= 0x5) | |
| b43legacy_radio_write16(dev, 0x0051, 0x0037); | |
| } | |
| /* Turn the Analog ON/OFF */ | |
| static void b43legacy_switch_analog(struct b43legacy_wldev *dev, int on) | |
| { | |
| b43legacy_write16(dev, B43legacy_MMIO_PHY0, on ? 0 : 0xF4); | |
| } | |
| void b43legacy_wireless_core_reset(struct b43legacy_wldev *dev, u32 flags) | |
| { | |
| u32 tmslow; | |
| u32 macctl; | |
| flags |= B43legacy_TMSLOW_PHYCLKEN; | |
| flags |= B43legacy_TMSLOW_PHYRESET; | |
| ssb_device_enable(dev->dev, flags); | |
| msleep(2); /* Wait for the PLL to turn on. */ | |
| /* Now take the PHY out of Reset again */ | |
| tmslow = ssb_read32(dev->dev, SSB_TMSLOW); | |
| tmslow |= SSB_TMSLOW_FGC; | |
| tmslow &= ~B43legacy_TMSLOW_PHYRESET; | |
| ssb_write32(dev->dev, SSB_TMSLOW, tmslow); | |
| ssb_read32(dev->dev, SSB_TMSLOW); /* flush */ | |
| msleep(1); | |
| tmslow &= ~SSB_TMSLOW_FGC; | |
| ssb_write32(dev->dev, SSB_TMSLOW, tmslow); | |
| ssb_read32(dev->dev, SSB_TMSLOW); /* flush */ | |
| msleep(1); | |
| /* Turn Analog ON */ | |
| b43legacy_switch_analog(dev, 1); | |
| macctl = b43legacy_read32(dev, B43legacy_MMIO_MACCTL); | |
| macctl &= ~B43legacy_MACCTL_GMODE; | |
| if (flags & B43legacy_TMSLOW_GMODE) { | |
| macctl |= B43legacy_MACCTL_GMODE; | |
| dev->phy.gmode = true; | |
| } else | |
| dev->phy.gmode = false; | |
| macctl |= B43legacy_MACCTL_IHR_ENABLED; | |
| b43legacy_write32(dev, B43legacy_MMIO_MACCTL, macctl); | |
| } | |
| static void handle_irq_transmit_status(struct b43legacy_wldev *dev) | |
| { | |
| u32 v0; | |
| u32 v1; | |
| u16 tmp; | |
| struct b43legacy_txstatus stat; | |
| while (1) { | |
| v0 = b43legacy_read32(dev, B43legacy_MMIO_XMITSTAT_0); | |
| if (!(v0 & 0x00000001)) | |
| break; | |
| v1 = b43legacy_read32(dev, B43legacy_MMIO_XMITSTAT_1); | |
| stat.cookie = (v0 >> 16); | |
| stat.seq = (v1 & 0x0000FFFF); | |
| stat.phy_stat = ((v1 & 0x00FF0000) >> 16); | |
| tmp = (v0 & 0x0000FFFF); | |
| stat.frame_count = ((tmp & 0xF000) >> 12); | |
| stat.rts_count = ((tmp & 0x0F00) >> 8); | |
| stat.supp_reason = ((tmp & 0x001C) >> 2); | |
| stat.pm_indicated = !!(tmp & 0x0080); | |
| stat.intermediate = !!(tmp & 0x0040); | |
| stat.for_ampdu = !!(tmp & 0x0020); | |
| stat.acked = !!(tmp & 0x0002); | |
| b43legacy_handle_txstatus(dev, &stat); | |
| } | |
| } | |
| static void drain_txstatus_queue(struct b43legacy_wldev *dev) | |
| { | |
| u32 dummy; | |
| if (dev->dev->id.revision < 5) | |
| return; | |
| /* Read all entries from the microcode TXstatus FIFO | |
| * and throw them away. | |
| */ | |
| while (1) { | |
| dummy = b43legacy_read32(dev, B43legacy_MMIO_XMITSTAT_0); | |
| if (!(dummy & 0x00000001)) | |
| break; | |
| dummy = b43legacy_read32(dev, B43legacy_MMIO_XMITSTAT_1); | |
| } | |
| } | |
| static u32 b43legacy_jssi_read(struct b43legacy_wldev *dev) | |
| { | |
| u32 val = 0; | |
| val = b43legacy_shm_read16(dev, B43legacy_SHM_SHARED, 0x40A); | |
| val <<= 16; | |
| val |= b43legacy_shm_read16(dev, B43legacy_SHM_SHARED, 0x408); | |
| return val; | |
| } | |
| static void b43legacy_jssi_write(struct b43legacy_wldev *dev, u32 jssi) | |
| { | |
| b43legacy_shm_write16(dev, B43legacy_SHM_SHARED, 0x408, | |
| (jssi & 0x0000FFFF)); | |
| b43legacy_shm_write16(dev, B43legacy_SHM_SHARED, 0x40A, | |
| (jssi & 0xFFFF0000) >> 16); | |
| } | |
| static void b43legacy_generate_noise_sample(struct b43legacy_wldev *dev) | |
| { | |
| b43legacy_jssi_write(dev, 0x7F7F7F7F); | |
| b43legacy_write32(dev, B43legacy_MMIO_MACCMD, | |
| b43legacy_read32(dev, B43legacy_MMIO_MACCMD) | |
| | B43legacy_MACCMD_BGNOISE); | |
| B43legacy_WARN_ON(dev->noisecalc.channel_at_start != | |
| dev->phy.channel); | |
| } | |
| static void b43legacy_calculate_link_quality(struct b43legacy_wldev *dev) | |
| { | |
| /* Top half of Link Quality calculation. */ | |
| if (dev->noisecalc.calculation_running) | |
| return; | |
| dev->noisecalc.channel_at_start = dev->phy.channel; | |
| dev->noisecalc.calculation_running = true; | |
| dev->noisecalc.nr_samples = 0; | |
| b43legacy_generate_noise_sample(dev); | |
| } | |
| static void handle_irq_noise(struct b43legacy_wldev *dev) | |
| { | |
| struct b43legacy_phy *phy = &dev->phy; | |
| u16 tmp; | |
| u8 noise[4]; | |
| u8 i; | |
| u8 j; | |
| s32 average; | |
| /* Bottom half of Link Quality calculation. */ | |
| B43legacy_WARN_ON(!dev->noisecalc.calculation_running); | |
| if (dev->noisecalc.channel_at_start != phy->channel) | |
| goto drop_calculation; | |
| *((__le32 *)noise) = cpu_to_le32(b43legacy_jssi_read(dev)); | |
| if (noise[0] == 0x7F || noise[1] == 0x7F || | |
| noise[2] == 0x7F || noise[3] == 0x7F) | |
| goto generate_new; | |
| /* Get the noise samples. */ | |
| B43legacy_WARN_ON(dev->noisecalc.nr_samples >= 8); | |
| i = dev->noisecalc.nr_samples; | |
| noise[0] = clamp_val(noise[0], 0, ARRAY_SIZE(phy->nrssi_lt) - 1); | |
| noise[1] = clamp_val(noise[1], 0, ARRAY_SIZE(phy->nrssi_lt) - 1); | |
| noise[2] = clamp_val(noise[2], 0, ARRAY_SIZE(phy->nrssi_lt) - 1); | |
| noise[3] = clamp_val(noise[3], 0, ARRAY_SIZE(phy->nrssi_lt) - 1); | |
| dev->noisecalc.samples[i][0] = phy->nrssi_lt[noise[0]]; | |
| dev->noisecalc.samples[i][1] = phy->nrssi_lt[noise[1]]; | |
| dev->noisecalc.samples[i][2] = phy->nrssi_lt[noise[2]]; | |
| dev->noisecalc.samples[i][3] = phy->nrssi_lt[noise[3]]; | |
| dev->noisecalc.nr_samples++; | |
| if (dev->noisecalc.nr_samples == 8) { | |
| /* Calculate the Link Quality by the noise samples. */ | |
| average = 0; | |
| for (i = 0; i < 8; i++) { | |
| for (j = 0; j < 4; j++) | |
| average += dev->noisecalc.samples[i][j]; | |
| } | |
| average /= (8 * 4); | |
| average *= 125; | |
| average += 64; | |
| average /= 128; | |
| tmp = b43legacy_shm_read16(dev, B43legacy_SHM_SHARED, | |
| 0x40C); | |
| tmp = (tmp / 128) & 0x1F; | |
| if (tmp >= 8) | |
| average += 2; | |
| else | |
| average -= 25; | |
| if (tmp == 8) | |
| average -= 72; | |
| else | |
| average -= 48; | |
| dev->stats.link_noise = average; | |
| drop_calculation: | |
| dev->noisecalc.calculation_running = false; | |
| return; | |
| } | |
| generate_new: | |
| b43legacy_generate_noise_sample(dev); | |
| } | |
| static void handle_irq_tbtt_indication(struct b43legacy_wldev *dev) | |
| { | |
| if (b43legacy_is_mode(dev->wl, NL80211_IFTYPE_AP)) { | |
| /* TODO: PS TBTT */ | |
| } else { | |
| if (1/*FIXME: the last PSpoll frame was sent successfully */) | |
| b43legacy_power_saving_ctl_bits(dev, -1, -1); | |
| } | |
| if (b43legacy_is_mode(dev->wl, NL80211_IFTYPE_ADHOC)) | |
| dev->dfq_valid = true; | |
| } | |
| static void handle_irq_atim_end(struct b43legacy_wldev *dev) | |
| { | |
| if (dev->dfq_valid) { | |
| b43legacy_write32(dev, B43legacy_MMIO_MACCMD, | |
| b43legacy_read32(dev, B43legacy_MMIO_MACCMD) | |
| | B43legacy_MACCMD_DFQ_VALID); | |
| dev->dfq_valid = false; | |
| } | |
| } | |
| static void handle_irq_pmq(struct b43legacy_wldev *dev) | |
| { | |
| u32 tmp; | |
| /* TODO: AP mode. */ | |
| while (1) { | |
| tmp = b43legacy_read32(dev, B43legacy_MMIO_PS_STATUS); | |
| if (!(tmp & 0x00000008)) | |
| break; | |
| } | |
| /* 16bit write is odd, but correct. */ | |
| b43legacy_write16(dev, B43legacy_MMIO_PS_STATUS, 0x0002); | |
| } | |
| static void b43legacy_write_template_common(struct b43legacy_wldev *dev, | |
| const u8 *data, u16 size, | |
| u16 ram_offset, | |
| u16 shm_size_offset, u8 rate) | |
| { | |
| u32 i; | |
| u32 tmp; | |
| struct b43legacy_plcp_hdr4 plcp; | |
| plcp.data = 0; | |
| b43legacy_generate_plcp_hdr(&plcp, size + FCS_LEN, rate); | |
| b43legacy_ram_write(dev, ram_offset, le32_to_cpu(plcp.data)); | |
| ram_offset += sizeof(u32); | |
| /* The PLCP is 6 bytes long, but we only wrote 4 bytes, yet. | |
| * So leave the first two bytes of the next write blank. | |
| */ | |
| tmp = (u32)(data[0]) << 16; | |
| tmp |= (u32)(data[1]) << 24; | |
| b43legacy_ram_write(dev, ram_offset, tmp); | |
| ram_offset += sizeof(u32); | |
| for (i = 2; i < size; i += sizeof(u32)) { | |
| tmp = (u32)(data[i + 0]); | |
| if (i + 1 < size) | |
| tmp |= (u32)(data[i + 1]) << 8; | |
| if (i + 2 < size) | |
| tmp |= (u32)(data[i + 2]) << 16; | |
| if (i + 3 < size) | |
| tmp |= (u32)(data[i + 3]) << 24; | |
| b43legacy_ram_write(dev, ram_offset + i - 2, tmp); | |
| } | |
| b43legacy_shm_write16(dev, B43legacy_SHM_SHARED, shm_size_offset, | |
| size + sizeof(struct b43legacy_plcp_hdr6)); | |
| } | |
| /* Convert a b43legacy antenna number value to the PHY TX control value. */ | |
| static u16 b43legacy_antenna_to_phyctl(int antenna) | |
| { | |
| switch (antenna) { | |
| case B43legacy_ANTENNA0: | |
| return B43legacy_TX4_PHY_ANT0; | |
| case B43legacy_ANTENNA1: | |
| return B43legacy_TX4_PHY_ANT1; | |
| } | |
| return B43legacy_TX4_PHY_ANTLAST; | |
| } | |
| static void b43legacy_write_beacon_template(struct b43legacy_wldev *dev, | |
| u16 ram_offset, | |
| u16 shm_size_offset) | |
| { | |
| unsigned int i, len, variable_len; | |
| const struct ieee80211_mgmt *bcn; | |
| const u8 *ie; | |
| bool tim_found = false; | |
| unsigned int rate; | |
| u16 ctl; | |
| int antenna; | |
| struct ieee80211_tx_info *info = IEEE80211_SKB_CB(dev->wl->current_beacon); | |
| bcn = (const struct ieee80211_mgmt *)(dev->wl->current_beacon->data); | |
| len = min_t(size_t, dev->wl->current_beacon->len, | |
| 0x200 - sizeof(struct b43legacy_plcp_hdr6)); | |
| rate = ieee80211_get_tx_rate(dev->wl->hw, info)->hw_value; | |
| b43legacy_write_template_common(dev, (const u8 *)bcn, len, ram_offset, | |
| shm_size_offset, rate); | |
| /* Write the PHY TX control parameters. */ | |
| antenna = B43legacy_ANTENNA_DEFAULT; | |
| antenna = b43legacy_antenna_to_phyctl(antenna); | |
| ctl = b43legacy_shm_read16(dev, B43legacy_SHM_SHARED, | |
| B43legacy_SHM_SH_BEACPHYCTL); | |
| /* We can't send beacons with short preamble. Would get PHY errors. */ | |
| ctl &= ~B43legacy_TX4_PHY_SHORTPRMBL; | |
| ctl &= ~B43legacy_TX4_PHY_ANT; | |
| ctl &= ~B43legacy_TX4_PHY_ENC; | |
| ctl |= antenna; | |
| ctl |= B43legacy_TX4_PHY_ENC_CCK; | |
| b43legacy_shm_write16(dev, B43legacy_SHM_SHARED, | |
| B43legacy_SHM_SH_BEACPHYCTL, ctl); | |
| /* Find the position of the TIM and the DTIM_period value | |
| * and write them to SHM. */ | |
| ie = bcn->u.beacon.variable; | |
| variable_len = len - offsetof(struct ieee80211_mgmt, u.beacon.variable); | |
| for (i = 0; i < variable_len - 2; ) { | |
| uint8_t ie_id, ie_len; | |
| ie_id = ie[i]; | |
| ie_len = ie[i + 1]; | |
| if (ie_id == 5) { | |
| u16 tim_position; | |
| u16 dtim_period; | |
| /* This is the TIM Information Element */ | |
| /* Check whether the ie_len is in the beacon data range. */ | |
| if (variable_len < ie_len + 2 + i) | |
| break; | |
| /* A valid TIM is at least 4 bytes long. */ | |
| if (ie_len < 4) | |
| break; | |
| tim_found = true; | |
| tim_position = sizeof(struct b43legacy_plcp_hdr6); | |
| tim_position += offsetof(struct ieee80211_mgmt, | |
| u.beacon.variable); | |
| tim_position += i; | |
| dtim_period = ie[i + 3]; | |
| b43legacy_shm_write16(dev, B43legacy_SHM_SHARED, | |
| B43legacy_SHM_SH_TIMPOS, tim_position); | |
| b43legacy_shm_write16(dev, B43legacy_SHM_SHARED, | |
| B43legacy_SHM_SH_DTIMP, dtim_period); | |
| break; | |
| } | |
| i += ie_len + 2; | |
| } | |
| if (!tim_found) { | |
| b43legacywarn(dev->wl, "Did not find a valid TIM IE in the " | |
| "beacon template packet. AP or IBSS operation " | |
| "may be broken.\n"); | |
| } else | |
| b43legacydbg(dev->wl, "Updated beacon template\n"); | |
| } | |
| static void b43legacy_write_probe_resp_plcp(struct b43legacy_wldev *dev, | |
| u16 shm_offset, u16 size, | |
| struct ieee80211_rate *rate) | |
| { | |
| struct b43legacy_plcp_hdr4 plcp; | |
| u32 tmp; | |
| __le16 dur; | |
| plcp.data = 0; | |
| b43legacy_generate_plcp_hdr(&plcp, size + FCS_LEN, rate->hw_value); | |
| dur = ieee80211_generic_frame_duration(dev->wl->hw, | |
| dev->wl->vif, | |
| IEEE80211_BAND_2GHZ, | |
| size, | |
| rate); | |
| /* Write PLCP in two parts and timing for packet transfer */ | |
| tmp = le32_to_cpu(plcp.data); | |
| b43legacy_shm_write16(dev, B43legacy_SHM_SHARED, shm_offset, | |
| tmp & 0xFFFF); | |
| b43legacy_shm_write16(dev, B43legacy_SHM_SHARED, shm_offset + 2, | |
| tmp >> 16); | |
| b43legacy_shm_write16(dev, B43legacy_SHM_SHARED, shm_offset + 6, | |
| le16_to_cpu(dur)); | |
| } | |
| /* Instead of using custom probe response template, this function | |
| * just patches custom beacon template by: | |
| * 1) Changing packet type | |
| * 2) Patching duration field | |
| * 3) Stripping TIM | |
| */ | |
| static const u8 *b43legacy_generate_probe_resp(struct b43legacy_wldev *dev, | |
| u16 *dest_size, | |
| struct ieee80211_rate *rate) | |
| { | |
| const u8 *src_data; | |
| u8 *dest_data; | |
| u16 src_size, elem_size, src_pos, dest_pos; | |
| __le16 dur; | |
| struct ieee80211_hdr *hdr; | |
| size_t ie_start; | |
| src_size = dev->wl->current_beacon->len; | |
| src_data = (const u8 *)dev->wl->current_beacon->data; | |
| /* Get the start offset of the variable IEs in the packet. */ | |
| ie_start = offsetof(struct ieee80211_mgmt, u.probe_resp.variable); | |
| B43legacy_WARN_ON(ie_start != offsetof(struct ieee80211_mgmt, | |
| u.beacon.variable)); | |
| if (B43legacy_WARN_ON(src_size < ie_start)) | |
| return NULL; | |
| dest_data = kmalloc(src_size, GFP_ATOMIC); | |
| if (unlikely(!dest_data)) | |
| return NULL; | |
| /* Copy the static data and all Information Elements, except the TIM. */ | |
| memcpy(dest_data, src_data, ie_start); | |
| src_pos = ie_start; | |
| dest_pos = ie_start; | |
| for ( ; src_pos < src_size - 2; src_pos += elem_size) { | |
| elem_size = src_data[src_pos + 1] + 2; | |
| if (src_data[src_pos] == 5) { | |
| /* This is the TIM. */ | |
| continue; | |
| } | |
| memcpy(dest_data + dest_pos, src_data + src_pos, elem_size); | |
| dest_pos += elem_size; | |
| } | |
| *dest_size = dest_pos; | |
| hdr = (struct ieee80211_hdr *)dest_data; | |
| /* Set the frame control. */ | |
| hdr->frame_control = cpu_to_le16(IEEE80211_FTYPE_MGMT | | |
| IEEE80211_STYPE_PROBE_RESP); | |
| dur = ieee80211_generic_frame_duration(dev->wl->hw, | |
| dev->wl->vif, | |
| IEEE80211_BAND_2GHZ, | |
| *dest_size, | |
| rate); | |
| hdr->duration_id = dur; | |
| return dest_data; | |
| } | |
| static void b43legacy_write_probe_resp_template(struct b43legacy_wldev *dev, | |
| u16 ram_offset, | |
| u16 shm_size_offset, | |
| struct ieee80211_rate *rate) | |
| { | |
| const u8 *probe_resp_data; | |
| u16 size; | |
| size = dev->wl->current_beacon->len; | |
| probe_resp_data = b43legacy_generate_probe_resp(dev, &size, rate); | |
| if (unlikely(!probe_resp_data)) | |
| return; | |
| /* Looks like PLCP headers plus packet timings are stored for | |
| * all possible basic rates | |
| */ | |
| b43legacy_write_probe_resp_plcp(dev, 0x31A, size, | |
| &b43legacy_b_ratetable[0]); | |
| b43legacy_write_probe_resp_plcp(dev, 0x32C, size, | |
| &b43legacy_b_ratetable[1]); | |
| b43legacy_write_probe_resp_plcp(dev, 0x33E, size, | |
| &b43legacy_b_ratetable[2]); | |
| b43legacy_write_probe_resp_plcp(dev, 0x350, size, | |
| &b43legacy_b_ratetable[3]); | |
| size = min_t(size_t, size, | |
| 0x200 - sizeof(struct b43legacy_plcp_hdr6)); | |
| b43legacy_write_template_common(dev, probe_resp_data, | |
| size, ram_offset, | |
| shm_size_offset, rate->hw_value); | |
| kfree(probe_resp_data); | |
| } | |
| static void b43legacy_upload_beacon0(struct b43legacy_wldev *dev) | |
| { | |
| struct b43legacy_wl *wl = dev->wl; | |
| if (wl->beacon0_uploaded) | |
| return; | |
| b43legacy_write_beacon_template(dev, 0x68, 0x18); | |
| /* FIXME: Probe resp upload doesn't really belong here, | |
| * but we don't use that feature anyway. */ | |
| b43legacy_write_probe_resp_template(dev, 0x268, 0x4A, | |
| &__b43legacy_ratetable[3]); | |
| wl->beacon0_uploaded = true; | |
| } | |
| static void b43legacy_upload_beacon1(struct b43legacy_wldev *dev) | |
| { | |
| struct b43legacy_wl *wl = dev->wl; | |
| if (wl->beacon1_uploaded) | |
| return; | |
| b43legacy_write_beacon_template(dev, 0x468, 0x1A); | |
| wl->beacon1_uploaded = true; | |
| } | |
| static void handle_irq_beacon(struct b43legacy_wldev *dev) | |
| { | |
| struct b43legacy_wl *wl = dev->wl; | |
| u32 cmd, beacon0_valid, beacon1_valid; | |
| if (!b43legacy_is_mode(wl, NL80211_IFTYPE_AP)) | |
| return; | |
| /* This is the bottom half of the asynchronous beacon update. */ | |
| /* Ignore interrupt in the future. */ | |
| dev->irq_mask &= ~B43legacy_IRQ_BEACON; | |
| cmd = b43legacy_read32(dev, B43legacy_MMIO_MACCMD); | |
| beacon0_valid = (cmd & B43legacy_MACCMD_BEACON0_VALID); | |
| beacon1_valid = (cmd & B43legacy_MACCMD_BEACON1_VALID); | |
| /* Schedule interrupt manually, if busy. */ | |
| if (beacon0_valid && beacon1_valid) { | |
| b43legacy_write32(dev, B43legacy_MMIO_GEN_IRQ_REASON, B43legacy_IRQ_BEACON); | |
| dev->irq_mask |= B43legacy_IRQ_BEACON; | |
| return; | |
| } | |
| if (unlikely(wl->beacon_templates_virgin)) { | |
| /* We never uploaded a beacon before. | |
| * Upload both templates now, but only mark one valid. */ | |
| wl->beacon_templates_virgin = false; | |
| b43legacy_upload_beacon0(dev); | |
| b43legacy_upload_beacon1(dev); | |
| cmd = b43legacy_read32(dev, B43legacy_MMIO_MACCMD); | |
| cmd |= B43legacy_MACCMD_BEACON0_VALID; | |
| b43legacy_write32(dev, B43legacy_MMIO_MACCMD, cmd); | |
| } else { | |
| if (!beacon0_valid) { | |
| b43legacy_upload_beacon0(dev); | |
| cmd = b43legacy_read32(dev, B43legacy_MMIO_MACCMD); | |
| cmd |= B43legacy_MACCMD_BEACON0_VALID; | |
| b43legacy_write32(dev, B43legacy_MMIO_MACCMD, cmd); | |
| } else if (!beacon1_valid) { | |
| b43legacy_upload_beacon1(dev); | |
| cmd = b43legacy_read32(dev, B43legacy_MMIO_MACCMD); | |
| cmd |= B43legacy_MACCMD_BEACON1_VALID; | |
| b43legacy_write32(dev, B43legacy_MMIO_MACCMD, cmd); | |
| } | |
| } | |
| } | |
| static void b43legacy_beacon_update_trigger_work(struct work_struct *work) | |
| { | |
| struct b43legacy_wl *wl = container_of(work, struct b43legacy_wl, | |
| beacon_update_trigger); | |
| struct b43legacy_wldev *dev; | |
| mutex_lock(&wl->mutex); | |
| dev = wl->current_dev; | |
| if (likely(dev && (b43legacy_status(dev) >= B43legacy_STAT_INITIALIZED))) { | |
| spin_lock_irq(&wl->irq_lock); | |
| /* Update beacon right away or defer to IRQ. */ | |
| handle_irq_beacon(dev); | |
| /* The handler might have updated the IRQ mask. */ | |
| b43legacy_write32(dev, B43legacy_MMIO_GEN_IRQ_MASK, | |
| dev->irq_mask); | |
| mmiowb(); | |
| spin_unlock_irq(&wl->irq_lock); | |
| } | |
| mutex_unlock(&wl->mutex); | |
| } | |
| /* Asynchronously update the packet templates in template RAM. | |
| * Locking: Requires wl->irq_lock to be locked. */ | |
| static void b43legacy_update_templates(struct b43legacy_wl *wl) | |
| { | |
| struct sk_buff *beacon; | |
| /* This is the top half of the ansynchronous beacon update. The bottom | |
| * half is the beacon IRQ. Beacon update must be asynchronous to avoid | |
| * sending an invalid beacon. This can happen for example, if the | |
| * firmware transmits a beacon while we are updating it. */ | |
| /* We could modify the existing beacon and set the aid bit in the TIM | |
| * field, but that would probably require resizing and moving of data | |
| * within the beacon template. Simply request a new beacon and let | |
| * mac80211 do the hard work. */ | |
| beacon = ieee80211_beacon_get(wl->hw, wl->vif); | |
| if (unlikely(!beacon)) | |
| return; | |
| if (wl->current_beacon) | |
| dev_kfree_skb_any(wl->current_beacon); | |
| wl->current_beacon = beacon; | |
| wl->beacon0_uploaded = false; | |
| wl->beacon1_uploaded = false; | |
| ieee80211_queue_work(wl->hw, &wl->beacon_update_trigger); | |
| } | |
| static void b43legacy_set_beacon_int(struct b43legacy_wldev *dev, | |
| u16 beacon_int) | |
| { | |
| b43legacy_time_lock(dev); | |
| if (dev->dev->id.revision >= 3) { | |
| b43legacy_write32(dev, B43legacy_MMIO_TSF_CFP_REP, | |
| (beacon_int << 16)); | |
| b43legacy_write32(dev, B43legacy_MMIO_TSF_CFP_START, | |
| (beacon_int << 10)); | |
| } else { | |
| b43legacy_write16(dev, 0x606, (beacon_int >> 6)); | |
| b43legacy_write16(dev, 0x610, beacon_int); | |
| } | |
| b43legacy_time_unlock(dev); | |
| b43legacydbg(dev->wl, "Set beacon interval to %u\n", beacon_int); | |
| } | |
| static void handle_irq_ucode_debug(struct b43legacy_wldev *dev) | |
| { | |
| } | |
| /* Interrupt handler bottom-half */ | |
| static void b43legacy_interrupt_tasklet(struct b43legacy_wldev *dev) | |
| { | |
| u32 reason; | |
| u32 dma_reason[ARRAY_SIZE(dev->dma_reason)]; | |
| u32 merged_dma_reason = 0; | |
| int i; | |
| unsigned long flags; | |
| spin_lock_irqsave(&dev->wl->irq_lock, flags); | |
| B43legacy_WARN_ON(b43legacy_status(dev) < | |
| B43legacy_STAT_INITIALIZED); | |
| reason = dev->irq_reason; | |
| for (i = 0; i < ARRAY_SIZE(dma_reason); i++) { | |
| dma_reason[i] = dev->dma_reason[i]; | |
| merged_dma_reason |= dma_reason[i]; | |
| } | |
| if (unlikely(reason & B43legacy_IRQ_MAC_TXERR)) | |
| b43legacyerr(dev->wl, "MAC transmission error\n"); | |
| if (unlikely(reason & B43legacy_IRQ_PHY_TXERR)) { | |
| b43legacyerr(dev->wl, "PHY transmission error\n"); | |
| rmb(); | |
| if (unlikely(atomic_dec_and_test(&dev->phy.txerr_cnt))) { | |
| b43legacyerr(dev->wl, "Too many PHY TX errors, " | |
| "restarting the controller\n"); | |
| b43legacy_controller_restart(dev, "PHY TX errors"); | |
| } | |
| } | |
| if (unlikely(merged_dma_reason & (B43legacy_DMAIRQ_FATALMASK | | |
| B43legacy_DMAIRQ_NONFATALMASK))) { | |
| if (merged_dma_reason & B43legacy_DMAIRQ_FATALMASK) { | |
| b43legacyerr(dev->wl, "Fatal DMA error: " | |
| "0x%08X, 0x%08X, 0x%08X, " | |
| "0x%08X, 0x%08X, 0x%08X\n", | |
| dma_reason[0], dma_reason[1], | |
| dma_reason[2], dma_reason[3], | |
| dma_reason[4], dma_reason[5]); | |
| b43legacy_controller_restart(dev, "DMA error"); | |
| mmiowb(); | |
| spin_unlock_irqrestore(&dev->wl->irq_lock, flags); | |
| return; | |
| } | |
| if (merged_dma_reason & B43legacy_DMAIRQ_NONFATALMASK) | |
| b43legacyerr(dev->wl, "DMA error: " | |
| "0x%08X, 0x%08X, 0x%08X, " | |
| "0x%08X, 0x%08X, 0x%08X\n", | |
| dma_reason[0], dma_reason[1], | |
| dma_reason[2], dma_reason[3], | |
| dma_reason[4], dma_reason[5]); | |
| } | |
| if (unlikely(reason & B43legacy_IRQ_UCODE_DEBUG)) | |
| handle_irq_ucode_debug(dev); | |
| if (reason & B43legacy_IRQ_TBTT_INDI) | |
| handle_irq_tbtt_indication(dev); | |
| if (reason & B43legacy_IRQ_ATIM_END) | |
| handle_irq_atim_end(dev); | |
| if (reason & B43legacy_IRQ_BEACON) | |
| handle_irq_beacon(dev); | |
| if (reason & B43legacy_IRQ_PMQ) | |
| handle_irq_pmq(dev); | |
| if (reason & B43legacy_IRQ_TXFIFO_FLUSH_OK) | |
| ;/*TODO*/ | |
| if (reason & B43legacy_IRQ_NOISESAMPLE_OK) | |
| handle_irq_noise(dev); | |
| /* Check the DMA reason registers for received data. */ | |
| if (dma_reason[0] & B43legacy_DMAIRQ_RX_DONE) { | |
| if (b43legacy_using_pio(dev)) | |
| b43legacy_pio_rx(dev->pio.queue0); | |
| else | |
| b43legacy_dma_rx(dev->dma.rx_ring0); | |
| } | |
| B43legacy_WARN_ON(dma_reason[1] & B43legacy_DMAIRQ_RX_DONE); | |
| B43legacy_WARN_ON(dma_reason[2] & B43legacy_DMAIRQ_RX_DONE); | |
| if (dma_reason[3] & B43legacy_DMAIRQ_RX_DONE) { | |
| if (b43legacy_using_pio(dev)) | |
| b43legacy_pio_rx(dev->pio.queue3); | |
| else | |
| b43legacy_dma_rx(dev->dma.rx_ring3); | |
| } | |
| B43legacy_WARN_ON(dma_reason[4] & B43legacy_DMAIRQ_RX_DONE); | |
| B43legacy_WARN_ON(dma_reason[5] & B43legacy_DMAIRQ_RX_DONE); | |
| if (reason & B43legacy_IRQ_TX_OK) | |
| handle_irq_transmit_status(dev); | |
| b43legacy_write32(dev, B43legacy_MMIO_GEN_IRQ_MASK, dev->irq_mask); | |
| mmiowb(); | |
| spin_unlock_irqrestore(&dev->wl->irq_lock, flags); | |
| } | |
| static void pio_irq_workaround(struct b43legacy_wldev *dev, | |
| u16 base, int queueidx) | |
| { | |
| u16 rxctl; | |
| rxctl = b43legacy_read16(dev, base + B43legacy_PIO_RXCTL); | |
| if (rxctl & B43legacy_PIO_RXCTL_DATAAVAILABLE) | |
| dev->dma_reason[queueidx] |= B43legacy_DMAIRQ_RX_DONE; | |
| else | |
| dev->dma_reason[queueidx] &= ~B43legacy_DMAIRQ_RX_DONE; | |
| } | |
| static void b43legacy_interrupt_ack(struct b43legacy_wldev *dev, u32 reason) | |
| { | |
| if (b43legacy_using_pio(dev) && | |
| (dev->dev->id.revision < 3) && | |
| (!(reason & B43legacy_IRQ_PIO_WORKAROUND))) { | |
| /* Apply a PIO specific workaround to the dma_reasons */ | |
| pio_irq_workaround(dev, B43legacy_MMIO_PIO1_BASE, 0); | |
| pio_irq_workaround(dev, B43legacy_MMIO_PIO2_BASE, 1); | |
| pio_irq_workaround(dev, B43legacy_MMIO_PIO3_BASE, 2); | |
| pio_irq_workaround(dev, B43legacy_MMIO_PIO4_BASE, 3); | |
| } | |
| b43legacy_write32(dev, B43legacy_MMIO_GEN_IRQ_REASON, reason); | |
| b43legacy_write32(dev, B43legacy_MMIO_DMA0_REASON, | |
| dev->dma_reason[0]); | |
| b43legacy_write32(dev, B43legacy_MMIO_DMA1_REASON, | |
| dev->dma_reason[1]); | |
| b43legacy_write32(dev, B43legacy_MMIO_DMA2_REASON, | |
| dev->dma_reason[2]); | |
| b43legacy_write32(dev, B43legacy_MMIO_DMA3_REASON, | |
| dev->dma_reason[3]); | |
| b43legacy_write32(dev, B43legacy_MMIO_DMA4_REASON, | |
| dev->dma_reason[4]); | |
| b43legacy_write32(dev, B43legacy_MMIO_DMA5_REASON, | |
| dev->dma_reason[5]); | |
| } | |
| /* Interrupt handler top-half */ | |
| static irqreturn_t b43legacy_interrupt_handler(int irq, void *dev_id) | |
| { | |
| irqreturn_t ret = IRQ_NONE; | |
| struct b43legacy_wldev *dev = dev_id; | |
| u32 reason; | |
| B43legacy_WARN_ON(!dev); | |
| spin_lock(&dev->wl->irq_lock); | |
| if (unlikely(b43legacy_status(dev) < B43legacy_STAT_STARTED)) | |
| /* This can only happen on shared IRQ lines. */ | |
| goto out; | |
| reason = b43legacy_read32(dev, B43legacy_MMIO_GEN_IRQ_REASON); | |
| if (reason == 0xffffffff) /* shared IRQ */ | |
| goto out; | |
| ret = IRQ_HANDLED; | |
| reason &= dev->irq_mask; | |
| if (!reason) | |
| goto out; | |
| dev->dma_reason[0] = b43legacy_read32(dev, | |
| B43legacy_MMIO_DMA0_REASON) | |
| & 0x0001DC00; | |
| dev->dma_reason[1] = b43legacy_read32(dev, | |
| B43legacy_MMIO_DMA1_REASON) | |
| & 0x0000DC00; | |
| dev->dma_reason[2] = b43legacy_read32(dev, | |
| B43legacy_MMIO_DMA2_REASON) | |
| & 0x0000DC00; | |
| dev->dma_reason[3] = b43legacy_read32(dev, | |
| B43legacy_MMIO_DMA3_REASON) | |
| & 0x0001DC00; | |
| dev->dma_reason[4] = b43legacy_read32(dev, | |
| B43legacy_MMIO_DMA4_REASON) | |
| & 0x0000DC00; | |
| dev->dma_reason[5] = b43legacy_read32(dev, | |
| B43legacy_MMIO_DMA5_REASON) | |
| & 0x0000DC00; | |
| b43legacy_interrupt_ack(dev, reason); | |
| /* Disable all IRQs. They are enabled again in the bottom half. */ | |
| b43legacy_write32(dev, B43legacy_MMIO_GEN_IRQ_MASK, 0); | |
| /* Save the reason code and call our bottom half. */ | |
| dev->irq_reason = reason; | |
| tasklet_schedule(&dev->isr_tasklet); | |
| out: | |
| mmiowb(); | |
| spin_unlock(&dev->wl->irq_lock); | |
| return ret; | |
| } | |
| static void b43legacy_release_firmware(struct b43legacy_wldev *dev) | |
| { | |
| release_firmware(dev->fw.ucode); | |
| dev->fw.ucode = NULL; | |
| release_firmware(dev->fw.pcm); | |
| dev->fw.pcm = NULL; | |
| release_firmware(dev->fw.initvals); | |
| dev->fw.initvals = NULL; | |
| release_firmware(dev->fw.initvals_band); | |
| dev->fw.initvals_band = NULL; | |
| } | |
| static void b43legacy_print_fw_helptext(struct b43legacy_wl *wl) | |
| { | |
| b43legacyerr(wl, "You must go to http://wireless.kernel.org/en/users/" | |
| "Drivers/b43#devicefirmware " | |
| "and download the correct firmware (version 3).\n"); | |
| } | |
| static void b43legacy_fw_cb(const struct firmware *firmware, void *context) | |
| { | |
| struct b43legacy_wldev *dev = context; | |
| dev->fwp = firmware; | |
| complete(&dev->fw_load_complete); | |
| } | |
| static int do_request_fw(struct b43legacy_wldev *dev, | |
| const char *name, | |
| const struct firmware **fw, bool async) | |
| { | |
| char path[sizeof(modparam_fwpostfix) + 32]; | |
| struct b43legacy_fw_header *hdr; | |
| u32 size; | |
| int err; | |
| if (!name) | |
| return 0; | |
| snprintf(path, ARRAY_SIZE(path), | |
| "b43legacy%s/%s.fw", | |
| modparam_fwpostfix, name); | |
| b43legacyinfo(dev->wl, "Loading firmware %s\n", path); | |
| if (async) { | |
| init_completion(&dev->fw_load_complete); | |
| err = request_firmware_nowait(THIS_MODULE, 1, path, | |
| dev->dev->dev, GFP_KERNEL, | |
| dev, b43legacy_fw_cb); | |
| if (err) { | |
| b43legacyerr(dev->wl, "Unable to load firmware\n"); | |
| return err; | |
| } | |
| /* stall here until fw ready */ | |
| wait_for_completion(&dev->fw_load_complete); | |
| if (!dev->fwp) | |
| err = -EINVAL; | |
| *fw = dev->fwp; | |
| } else { | |
| err = request_firmware(fw, path, dev->dev->dev); | |
| } | |
| if (err) { | |
| b43legacyerr(dev->wl, "Firmware file \"%s\" not found " | |
| "or load failed.\n", path); | |
| return err; | |
| } | |
| if ((*fw)->size < sizeof(struct b43legacy_fw_header)) | |
| goto err_format; | |
| hdr = (struct b43legacy_fw_header *)((*fw)->data); | |
| switch (hdr->type) { | |
| case B43legacy_FW_TYPE_UCODE: | |
| case B43legacy_FW_TYPE_PCM: | |
| size = be32_to_cpu(hdr->size); | |
| if (size != (*fw)->size - sizeof(struct b43legacy_fw_header)) | |
| goto err_format; | |
| /* fallthrough */ | |
| case B43legacy_FW_TYPE_IV: | |
| if (hdr->ver != 1) | |
| goto err_format; | |
| break; | |
| default: | |
| goto err_format; | |
| } | |
| return err; | |
| err_format: | |
| b43legacyerr(dev->wl, "Firmware file \"%s\" format error.\n", path); | |
| return -EPROTO; | |
| } | |
| static int b43legacy_one_core_attach(struct ssb_device *dev, | |
| struct b43legacy_wl *wl); | |
| static void b43legacy_one_core_detach(struct ssb_device *dev); | |
| static void b43legacy_request_firmware(struct work_struct *work) | |
| { | |
| struct b43legacy_wl *wl = container_of(work, | |
| struct b43legacy_wl, firmware_load); | |
| struct b43legacy_wldev *dev = wl->current_dev; | |
| struct b43legacy_firmware *fw = &dev->fw; | |
| const u8 rev = dev->dev->id.revision; | |
| const char *filename; | |
| int err; | |
| if (!fw->ucode) { | |
| if (rev == 2) | |
| filename = "ucode2"; | |
| else if (rev == 4) | |
| filename = "ucode4"; | |
| else | |
| filename = "ucode5"; | |
| err = do_request_fw(dev, filename, &fw->ucode, true); | |
| if (err) | |
| goto err_load; | |
| } | |
| if (!fw->pcm) { | |
| if (rev < 5) | |
| filename = "pcm4"; | |
| else | |
| filename = "pcm5"; | |
| err = do_request_fw(dev, filename, &fw->pcm, false); | |
| if (err) | |
| goto err_load; | |
| } | |
| if (!fw->initvals) { | |
| switch (dev->phy.type) { | |
| case B43legacy_PHYTYPE_B: | |
| case B43legacy_PHYTYPE_G: | |
| if ((rev >= 5) && (rev <= 10)) | |
| filename = "b0g0initvals5"; | |
| else if (rev == 2 || rev == 4) | |
| filename = "b0g0initvals2"; | |
| else | |
| goto err_no_initvals; | |
| break; | |
| default: | |
| goto err_no_initvals; | |
| } | |
| err = do_request_fw(dev, filename, &fw->initvals, false); | |
| if (err) | |
| goto err_load; | |
| } | |
| if (!fw->initvals_band) { | |
| switch (dev->phy.type) { | |
| case B43legacy_PHYTYPE_B: | |
| case B43legacy_PHYTYPE_G: | |
| if ((rev >= 5) && (rev <= 10)) | |
| filename = "b0g0bsinitvals5"; | |
| else if (rev >= 11) | |
| filename = NULL; | |
| else if (rev == 2 || rev == 4) | |
| filename = NULL; | |
| else | |
| goto err_no_initvals; | |
| break; | |
| default: | |
| goto err_no_initvals; | |
| } | |
| err = do_request_fw(dev, filename, &fw->initvals_band, false); | |
| if (err) | |
| goto err_load; | |
| } | |
| err = ieee80211_register_hw(wl->hw); | |
| if (err) | |
| goto err_one_core_detach; | |
| return; | |
| err_one_core_detach: | |
| b43legacy_one_core_detach(dev->dev); | |
| goto error; | |
| err_load: | |
| b43legacy_print_fw_helptext(dev->wl); | |
| goto error; | |
| err_no_initvals: | |
| err = -ENODEV; | |
| b43legacyerr(dev->wl, "No Initial Values firmware file for PHY %u, " | |
| "core rev %u\n", dev->phy.type, rev); | |
| goto error; | |
| error: | |
| b43legacy_release_firmware(dev); | |
| return; | |
| } | |
| static int b43legacy_upload_microcode(struct b43legacy_wldev *dev) | |
| { | |
| struct wiphy *wiphy = dev->wl->hw->wiphy; | |
| const size_t hdr_len = sizeof(struct b43legacy_fw_header); | |
| const __be32 *data; | |
| unsigned int i; | |
| unsigned int len; | |
| u16 fwrev; | |
| u16 fwpatch; | |
| u16 fwdate; | |
| u16 fwtime; | |
| u32 tmp, macctl; | |
| int err = 0; | |
| /* Jump the microcode PSM to offset 0 */ | |
| macctl = b43legacy_read32(dev, B43legacy_MMIO_MACCTL); | |
| B43legacy_WARN_ON(macctl & B43legacy_MACCTL_PSM_RUN); | |
| macctl |= B43legacy_MACCTL_PSM_JMP0; | |
| b43legacy_write32(dev, B43legacy_MMIO_MACCTL, macctl); | |
| /* Zero out all microcode PSM registers and shared memory. */ | |
| for (i = 0; i < 64; i++) | |
| b43legacy_shm_write16(dev, B43legacy_SHM_WIRELESS, i, 0); | |
| for (i = 0; i < 4096; i += 2) | |
| b43legacy_shm_write16(dev, B43legacy_SHM_SHARED, i, 0); | |
| /* Upload Microcode. */ | |
| data = (__be32 *) (dev->fw.ucode->data + hdr_len); | |
| len = (dev->fw.ucode->size - hdr_len) / sizeof(__be32); | |
| b43legacy_shm_control_word(dev, | |
| B43legacy_SHM_UCODE | | |
| B43legacy_SHM_AUTOINC_W, | |
| 0x0000); | |
| for (i = 0; i < len; i++) { | |
| b43legacy_write32(dev, B43legacy_MMIO_SHM_DATA, | |
| be32_to_cpu(data[i])); | |
| udelay(10); | |
| } | |
| if (dev->fw.pcm) { | |
| /* Upload PCM data. */ | |
| data = (__be32 *) (dev->fw.pcm->data + hdr_len); | |
| len = (dev->fw.pcm->size - hdr_len) / sizeof(__be32); | |
| b43legacy_shm_control_word(dev, B43legacy_SHM_HW, 0x01EA); | |
| b43legacy_write32(dev, B43legacy_MMIO_SHM_DATA, 0x00004000); | |
| /* No need for autoinc bit in SHM_HW */ | |
| b43legacy_shm_control_word(dev, B43legacy_SHM_HW, 0x01EB); | |
| for (i = 0; i < len; i++) { | |
| b43legacy_write32(dev, B43legacy_MMIO_SHM_DATA, | |
| be32_to_cpu(data[i])); | |
| udelay(10); | |
| } | |
| } | |
| b43legacy_write32(dev, B43legacy_MMIO_GEN_IRQ_REASON, | |
| B43legacy_IRQ_ALL); | |
| /* Start the microcode PSM */ | |
| macctl = b43legacy_read32(dev, B43legacy_MMIO_MACCTL); | |
| macctl &= ~B43legacy_MACCTL_PSM_JMP0; | |
| macctl |= B43legacy_MACCTL_PSM_RUN; | |
| b43legacy_write32(dev, B43legacy_MMIO_MACCTL, macctl); | |
| /* Wait for the microcode to load and respond */ | |
| i = 0; | |
| while (1) { | |
| tmp = b43legacy_read32(dev, B43legacy_MMIO_GEN_IRQ_REASON); | |
| if (tmp == B43legacy_IRQ_MAC_SUSPENDED) | |
| break; | |
| i++; | |
| if (i >= B43legacy_IRQWAIT_MAX_RETRIES) { | |
| b43legacyerr(dev->wl, "Microcode not responding\n"); | |
| b43legacy_print_fw_helptext(dev->wl); | |
| err = -ENODEV; | |
| goto error; | |
| } | |
| msleep_interruptible(50); | |
| if (signal_pending(current)) { | |
| err = -EINTR; | |
| goto error; | |
| } | |
| } | |
| /* dummy read follows */ | |
| b43legacy_read32(dev, B43legacy_MMIO_GEN_IRQ_REASON); | |
| /* Get and check the revisions. */ | |
| fwrev = b43legacy_shm_read16(dev, B43legacy_SHM_SHARED, | |
| B43legacy_SHM_SH_UCODEREV); | |
| fwpatch = b43legacy_shm_read16(dev, B43legacy_SHM_SHARED, | |
| B43legacy_SHM_SH_UCODEPATCH); | |
| fwdate = b43legacy_shm_read16(dev, B43legacy_SHM_SHARED, | |
| B43legacy_SHM_SH_UCODEDATE); | |
| fwtime = b43legacy_shm_read16(dev, B43legacy_SHM_SHARED, | |
| B43legacy_SHM_SH_UCODETIME); | |
| if (fwrev > 0x128) { | |
| b43legacyerr(dev->wl, "YOU ARE TRYING TO LOAD V4 FIRMWARE." | |
| " Only firmware from binary drivers version 3.x" | |
| " is supported. You must change your firmware" | |
| " files.\n"); | |
| b43legacy_print_fw_helptext(dev->wl); | |
| err = -EOPNOTSUPP; | |
| goto error; | |
| } | |
| b43legacyinfo(dev->wl, "Loading firmware version 0x%X, patch level %u " | |
| "(20%.2i-%.2i-%.2i %.2i:%.2i:%.2i)\n", fwrev, fwpatch, | |
| (fwdate >> 12) & 0xF, (fwdate >> 8) & 0xF, fwdate & 0xFF, | |
| (fwtime >> 11) & 0x1F, (fwtime >> 5) & 0x3F, | |
| fwtime & 0x1F); | |
| dev->fw.rev = fwrev; | |
| dev->fw.patch = fwpatch; | |
| snprintf(wiphy->fw_version, sizeof(wiphy->fw_version), "%u.%u", | |
| dev->fw.rev, dev->fw.patch); | |
| wiphy->hw_version = dev->dev->id.coreid; | |
| return 0; | |
| error: | |
| macctl = b43legacy_read32(dev, B43legacy_MMIO_MACCTL); | |
| macctl &= ~B43legacy_MACCTL_PSM_RUN; | |
| macctl |= B43legacy_MACCTL_PSM_JMP0; | |
| b43legacy_write32(dev, B43legacy_MMIO_MACCTL, macctl); | |
| return err; | |
| } | |
| static int b43legacy_write_initvals(struct b43legacy_wldev *dev, | |
| const struct b43legacy_iv *ivals, | |
| size_t count, | |
| size_t array_size) | |
| { | |
| const struct b43legacy_iv *iv; | |
| u16 offset; | |
| size_t i; | |
| bool bit32; | |
| BUILD_BUG_ON(sizeof(struct b43legacy_iv) != 6); | |
| iv = ivals; | |
| for (i = 0; i < count; i++) { | |
| if (array_size < sizeof(iv->offset_size)) | |
| goto err_format; | |
| array_size -= sizeof(iv->offset_size); | |
| offset = be16_to_cpu(iv->offset_size); | |
| bit32 = !!(offset & B43legacy_IV_32BIT); | |
| offset &= B43legacy_IV_OFFSET_MASK; | |
| if (offset >= 0x1000) | |
| goto err_format; | |
| if (bit32) { | |
| u32 value; | |
| if (array_size < sizeof(iv->data.d32)) | |
| goto err_format; | |
| array_size -= sizeof(iv->data.d32); | |
| value = get_unaligned_be32(&iv->data.d32); | |
| b43legacy_write32(dev, offset, value); | |
| iv = (const struct b43legacy_iv *)((const uint8_t *)iv + | |
| sizeof(__be16) + | |
| sizeof(__be32)); | |
| } else { | |
| u16 value; | |
| if (array_size < sizeof(iv->data.d16)) | |
| goto err_format; | |
| array_size -= sizeof(iv->data.d16); | |
| value = be16_to_cpu(iv->data.d16); | |
| b43legacy_write16(dev, offset, value); | |
| iv = (const struct b43legacy_iv *)((const uint8_t *)iv + | |
| sizeof(__be16) + | |
| sizeof(__be16)); | |
| } | |
| } | |
| if (array_size) | |
| goto err_format; | |
| return 0; | |
| err_format: | |
| b43legacyerr(dev->wl, "Initial Values Firmware file-format error.\n"); | |
| b43legacy_print_fw_helptext(dev->wl); | |
| return -EPROTO; | |
| } | |
| static int b43legacy_upload_initvals(struct b43legacy_wldev *dev) | |
| { | |
| const size_t hdr_len = sizeof(struct b43legacy_fw_header); | |
| const struct b43legacy_fw_header *hdr; | |
| struct b43legacy_firmware *fw = &dev->fw; | |
| const struct b43legacy_iv *ivals; | |
| size_t count; | |
| int err; | |
| hdr = (const struct b43legacy_fw_header *)(fw->initvals->data); | |
| ivals = (const struct b43legacy_iv *)(fw->initvals->data + hdr_len); | |
| count = be32_to_cpu(hdr->size); | |
| err = b43legacy_write_initvals(dev, ivals, count, | |
| fw->initvals->size - hdr_len); | |
| if (err) | |
| goto out; | |
| if (fw->initvals_band) { | |
| hdr = (const struct b43legacy_fw_header *) | |
| (fw->initvals_band->data); | |
| ivals = (const struct b43legacy_iv *)(fw->initvals_band->data | |
| + hdr_len); | |
| count = be32_to_cpu(hdr->size); | |
| err = b43legacy_write_initvals(dev, ivals, count, | |
| fw->initvals_band->size - hdr_len); | |
| if (err) | |
| goto out; | |
| } | |
| out: | |
| return err; | |
| } | |
| /* Initialize the GPIOs | |
| * http://bcm-specs.sipsolutions.net/GPIO | |
| */ | |
| static int b43legacy_gpio_init(struct b43legacy_wldev *dev) | |
| { | |
| struct ssb_bus *bus = dev->dev->bus; | |
| struct ssb_device *gpiodev, *pcidev = NULL; | |
| u32 mask; | |
| u32 set; | |
| b43legacy_write32(dev, B43legacy_MMIO_MACCTL, | |
| b43legacy_read32(dev, | |
| B43legacy_MMIO_MACCTL) | |
| & 0xFFFF3FFF); | |
| b43legacy_write16(dev, B43legacy_MMIO_GPIO_MASK, | |
| b43legacy_read16(dev, | |
| B43legacy_MMIO_GPIO_MASK) | |
| | 0x000F); | |
| mask = 0x0000001F; | |
| set = 0x0000000F; | |
| if (dev->dev->bus->chip_id == 0x4301) { | |
| mask |= 0x0060; | |
| set |= 0x0060; | |
| } | |
| if (dev->dev->bus->sprom.boardflags_lo & B43legacy_BFL_PACTRL) { | |
| b43legacy_write16(dev, B43legacy_MMIO_GPIO_MASK, | |
| b43legacy_read16(dev, | |
| B43legacy_MMIO_GPIO_MASK) | |
| | 0x0200); | |
| mask |= 0x0200; | |
| set |= 0x0200; | |
| } | |
| if (dev->dev->id.revision >= 2) | |
| mask |= 0x0010; /* FIXME: This is redundant. */ | |
| #ifdef CONFIG_SSB_DRIVER_PCICORE | |
| pcidev = bus->pcicore.dev; | |
| #endif | |
| gpiodev = bus->chipco.dev ? : pcidev; | |
| if (!gpiodev) | |
| return 0; | |
| ssb_write32(gpiodev, B43legacy_GPIO_CONTROL, | |
| (ssb_read32(gpiodev, B43legacy_GPIO_CONTROL) | |
| & ~mask) | set); | |
| return 0; | |
| } | |
| /* Turn off all GPIO stuff. Call this on module unload, for example. */ | |
| static void b43legacy_gpio_cleanup(struct b43legacy_wldev *dev) | |
| { | |
| struct ssb_bus *bus = dev->dev->bus; | |
| struct ssb_device *gpiodev, *pcidev = NULL; | |
| #ifdef CONFIG_SSB_DRIVER_PCICORE | |
| pcidev = bus->pcicore.dev; | |
| #endif | |
| gpiodev = bus->chipco.dev ? : pcidev; | |
| if (!gpiodev) | |
| return; | |
| ssb_write32(gpiodev, B43legacy_GPIO_CONTROL, 0); | |
| } | |
| /* http://bcm-specs.sipsolutions.net/EnableMac */ | |
| void b43legacy_mac_enable(struct b43legacy_wldev *dev) | |
| { | |
| dev->mac_suspended--; | |
| B43legacy_WARN_ON(dev->mac_suspended < 0); | |
| B43legacy_WARN_ON(irqs_disabled()); | |
| if (dev->mac_suspended == 0) { | |
| b43legacy_write32(dev, B43legacy_MMIO_MACCTL, | |
| b43legacy_read32(dev, | |
| B43legacy_MMIO_MACCTL) | |
| | B43legacy_MACCTL_ENABLED); | |
| b43legacy_write32(dev, B43legacy_MMIO_GEN_IRQ_REASON, | |
| B43legacy_IRQ_MAC_SUSPENDED); | |
| /* the next two are dummy reads */ | |
| b43legacy_read32(dev, B43legacy_MMIO_MACCTL); | |
| b43legacy_read32(dev, B43legacy_MMIO_GEN_IRQ_REASON); | |
| b43legacy_power_saving_ctl_bits(dev, -1, -1); | |
| /* Re-enable IRQs. */ | |
| spin_lock_irq(&dev->wl->irq_lock); | |
| b43legacy_write32(dev, B43legacy_MMIO_GEN_IRQ_MASK, | |
| dev->irq_mask); | |
| spin_unlock_irq(&dev->wl->irq_lock); | |
| } | |
| } | |
| /* http://bcm-specs.sipsolutions.net/SuspendMAC */ | |
| void b43legacy_mac_suspend(struct b43legacy_wldev *dev) | |
| { | |
| int i; | |
| u32 tmp; | |
| might_sleep(); | |
| B43legacy_WARN_ON(irqs_disabled()); | |
| B43legacy_WARN_ON(dev->mac_suspended < 0); | |
| if (dev->mac_suspended == 0) { | |
| /* Mask IRQs before suspending MAC. Otherwise | |
| * the MAC stays busy and won't suspend. */ | |
| spin_lock_irq(&dev->wl->irq_lock); | |
| b43legacy_write32(dev, B43legacy_MMIO_GEN_IRQ_MASK, 0); | |
| spin_unlock_irq(&dev->wl->irq_lock); | |
| b43legacy_synchronize_irq(dev); | |
| b43legacy_power_saving_ctl_bits(dev, -1, 1); | |
| b43legacy_write32(dev, B43legacy_MMIO_MACCTL, | |
| b43legacy_read32(dev, | |
| B43legacy_MMIO_MACCTL) | |
| & ~B43legacy_MACCTL_ENABLED); | |
| b43legacy_read32(dev, B43legacy_MMIO_GEN_IRQ_REASON); | |
| for (i = 40; i; i--) { | |
| tmp = b43legacy_read32(dev, | |
| B43legacy_MMIO_GEN_IRQ_REASON); | |
| if (tmp & B43legacy_IRQ_MAC_SUSPENDED) | |
| goto out; | |
| msleep(1); | |
| } | |
| b43legacyerr(dev->wl, "MAC suspend failed\n"); | |
| } | |
| out: | |
| dev->mac_suspended++; | |
| } | |
| static void b43legacy_adjust_opmode(struct b43legacy_wldev *dev) | |
| { | |
| struct b43legacy_wl *wl = dev->wl; | |
| u32 ctl; | |
| u16 cfp_pretbtt; | |
| ctl = b43legacy_read32(dev, B43legacy_MMIO_MACCTL); | |
| /* Reset status to STA infrastructure mode. */ | |
| ctl &= ~B43legacy_MACCTL_AP; | |
| ctl &= ~B43legacy_MACCTL_KEEP_CTL; | |
| ctl &= ~B43legacy_MACCTL_KEEP_BADPLCP; | |
| ctl &= ~B43legacy_MACCTL_KEEP_BAD; | |
| ctl &= ~B43legacy_MACCTL_PROMISC; | |
| ctl &= ~B43legacy_MACCTL_BEACPROMISC; | |
| ctl |= B43legacy_MACCTL_INFRA; | |
| if (b43legacy_is_mode(wl, NL80211_IFTYPE_AP)) | |
| ctl |= B43legacy_MACCTL_AP; | |
| else if (b43legacy_is_mode(wl, NL80211_IFTYPE_ADHOC)) | |
| ctl &= ~B43legacy_MACCTL_INFRA; | |
| if (wl->filter_flags & FIF_CONTROL) | |
| ctl |= B43legacy_MACCTL_KEEP_CTL; | |
| if (wl->filter_flags & FIF_FCSFAIL) | |
| ctl |= B43legacy_MACCTL_KEEP_BAD; | |
| if (wl->filter_flags & FIF_PLCPFAIL) | |
| ctl |= B43legacy_MACCTL_KEEP_BADPLCP; | |
| if (wl->filter_flags & FIF_BCN_PRBRESP_PROMISC) | |
| ctl |= B43legacy_MACCTL_BEACPROMISC; | |
| /* Workaround: On old hardware the HW-MAC-address-filter | |
| * doesn't work properly, so always run promisc in filter | |
| * it in software. */ | |
| if (dev->dev->id.revision <= 4) | |
| ctl |= B43legacy_MACCTL_PROMISC; | |
| b43legacy_write32(dev, B43legacy_MMIO_MACCTL, ctl); | |
| cfp_pretbtt = 2; | |
| if ((ctl & B43legacy_MACCTL_INFRA) && | |
| !(ctl & B43legacy_MACCTL_AP)) { | |
| if (dev->dev->bus->chip_id == 0x4306 && | |
| dev->dev->bus->chip_rev == 3) | |
| cfp_pretbtt = 100; | |
| else | |
| cfp_pretbtt = 50; | |
| } | |
| b43legacy_write16(dev, 0x612, cfp_pretbtt); | |
| } | |
| static void b43legacy_rate_memory_write(struct b43legacy_wldev *dev, | |
| u16 rate, | |
| int is_ofdm) | |
| { | |
| u16 offset; | |
| if (is_ofdm) { | |
| offset = 0x480; | |
| offset += (b43legacy_plcp_get_ratecode_ofdm(rate) & 0x000F) * 2; | |
| } else { | |
| offset = 0x4C0; | |
| offset += (b43legacy_plcp_get_ratecode_cck(rate) & 0x000F) * 2; | |
| } | |
| b43legacy_shm_write16(dev, B43legacy_SHM_SHARED, offset + 0x20, | |
| b43legacy_shm_read16(dev, | |
| B43legacy_SHM_SHARED, offset)); | |
| } | |
| static void b43legacy_rate_memory_init(struct b43legacy_wldev *dev) | |
| { | |
| switch (dev->phy.type) { | |
| case B43legacy_PHYTYPE_G: | |
| b43legacy_rate_memory_write(dev, B43legacy_OFDM_RATE_6MB, 1); | |
| b43legacy_rate_memory_write(dev, B43legacy_OFDM_RATE_12MB, 1); | |
| b43legacy_rate_memory_write(dev, B43legacy_OFDM_RATE_18MB, 1); | |
| b43legacy_rate_memory_write(dev, B43legacy_OFDM_RATE_24MB, 1); | |
| b43legacy_rate_memory_write(dev, B43legacy_OFDM_RATE_36MB, 1); | |
| b43legacy_rate_memory_write(dev, B43legacy_OFDM_RATE_48MB, 1); | |
| b43legacy_rate_memory_write(dev, B43legacy_OFDM_RATE_54MB, 1); | |
| /* fallthrough */ | |
| case B43legacy_PHYTYPE_B: | |
| b43legacy_rate_memory_write(dev, B43legacy_CCK_RATE_1MB, 0); | |
| b43legacy_rate_memory_write(dev, B43legacy_CCK_RATE_2MB, 0); | |
| b43legacy_rate_memory_write(dev, B43legacy_CCK_RATE_5MB, 0); | |
| b43legacy_rate_memory_write(dev, B43legacy_CCK_RATE_11MB, 0); | |
| break; | |
| default: | |
| B43legacy_BUG_ON(1); | |
| } | |
| } | |
| /* Set the TX-Antenna for management frames sent by firmware. */ | |
| static void b43legacy_mgmtframe_txantenna(struct b43legacy_wldev *dev, | |
| int antenna) | |
| { | |
| u16 ant = 0; | |
| u16 tmp; | |
| switch (antenna) { | |
| case B43legacy_ANTENNA0: | |
| ant |= B43legacy_TX4_PHY_ANT0; | |
| break; | |
| case B43legacy_ANTENNA1: | |
| ant |= B43legacy_TX4_PHY_ANT1; | |
| break; | |
| case B43legacy_ANTENNA_AUTO: | |
| ant |= B43legacy_TX4_PHY_ANTLAST; | |
| break; | |
| default: | |
| B43legacy_BUG_ON(1); | |
| } | |
| /* FIXME We also need to set the other flags of the PHY control | |
| * field somewhere. */ | |
| /* For Beacons */ | |
| tmp = b43legacy_shm_read16(dev, B43legacy_SHM_SHARED, | |
| B43legacy_SHM_SH_BEACPHYCTL); | |
| tmp = (tmp & ~B43legacy_TX4_PHY_ANT) | ant; | |
| b43legacy_shm_write16(dev, B43legacy_SHM_SHARED, | |
| B43legacy_SHM_SH_BEACPHYCTL, tmp); | |
| /* For ACK/CTS */ | |
| tmp = b43legacy_shm_read16(dev, B43legacy_SHM_SHARED, | |
| B43legacy_SHM_SH_ACKCTSPHYCTL); | |
| tmp = (tmp & ~B43legacy_TX4_PHY_ANT) | ant; | |
| b43legacy_shm_write16(dev, B43legacy_SHM_SHARED, | |
| B43legacy_SHM_SH_ACKCTSPHYCTL, tmp); | |
| /* For Probe Resposes */ | |
| tmp = b43legacy_shm_read16(dev, B43legacy_SHM_SHARED, | |
| B43legacy_SHM_SH_PRPHYCTL); | |
| tmp = (tmp & ~B43legacy_TX4_PHY_ANT) | ant; | |
| b43legacy_shm_write16(dev, B43legacy_SHM_SHARED, | |
| B43legacy_SHM_SH_PRPHYCTL, tmp); | |
| } | |
| /* This is the opposite of b43legacy_chip_init() */ | |
| static void b43legacy_chip_exit(struct b43legacy_wldev *dev) | |
| { | |
| b43legacy_radio_turn_off(dev, 1); | |
| b43legacy_gpio_cleanup(dev); | |
| /* firmware is released later */ | |
| } | |
| /* Initialize the chip | |
| * http://bcm-specs.sipsolutions.net/ChipInit | |
| */ | |
| static int b43legacy_chip_init(struct b43legacy_wldev *dev) | |
| { | |
| struct b43legacy_phy *phy = &dev->phy; | |
| int err; | |
| int tmp; | |
| u32 value32, macctl; | |
| u16 value16; | |
| /* Initialize the MAC control */ | |
| macctl = B43legacy_MACCTL_IHR_ENABLED | B43legacy_MACCTL_SHM_ENABLED; | |
| if (dev->phy.gmode) | |
| macctl |= B43legacy_MACCTL_GMODE; | |
| macctl |= B43legacy_MACCTL_INFRA; | |
| b43legacy_write32(dev, B43legacy_MMIO_MACCTL, macctl); | |
| err = b43legacy_upload_microcode(dev); | |
| if (err) | |
| goto out; /* firmware is released later */ | |
| err = b43legacy_gpio_init(dev); | |
| if (err) | |
| goto out; /* firmware is released later */ | |
| err = b43legacy_upload_initvals(dev); | |
| if (err) | |
| goto err_gpio_clean; | |
| b43legacy_radio_turn_on(dev); | |
| b43legacy_write16(dev, 0x03E6, 0x0000); | |
| err = b43legacy_phy_init(dev); | |
| if (err) | |
| goto err_radio_off; | |
| /* Select initial Interference Mitigation. */ | |
| tmp = phy->interfmode; | |
| phy->interfmode = B43legacy_INTERFMODE_NONE; | |
| b43legacy_radio_set_interference_mitigation(dev, tmp); | |
| b43legacy_phy_set_antenna_diversity(dev); | |
| b43legacy_mgmtframe_txantenna(dev, B43legacy_ANTENNA_DEFAULT); | |
| if (phy->type == B43legacy_PHYTYPE_B) { | |
| value16 = b43legacy_read16(dev, 0x005E); | |
| value16 |= 0x0004; | |
| b43legacy_write16(dev, 0x005E, value16); | |
| } | |
| b43legacy_write32(dev, 0x0100, 0x01000000); | |
| if (dev->dev->id.revision < 5) | |
| b43legacy_write32(dev, 0x010C, 0x01000000); | |
| value32 = b43legacy_read32(dev, B43legacy_MMIO_MACCTL); | |
| value32 &= ~B43legacy_MACCTL_INFRA; | |
| b43legacy_write32(dev, B43legacy_MMIO_MACCTL, value32); | |
| value32 = b43legacy_read32(dev, B43legacy_MMIO_MACCTL); | |
| value32 |= B43legacy_MACCTL_INFRA; | |
| b43legacy_write32(dev, B43legacy_MMIO_MACCTL, value32); | |
| if (b43legacy_using_pio(dev)) { | |
| b43legacy_write32(dev, 0x0210, 0x00000100); | |
| b43legacy_write32(dev, 0x0230, 0x00000100); | |
| b43legacy_write32(dev, 0x0250, 0x00000100); | |
| b43legacy_write32(dev, 0x0270, 0x00000100); | |
| b43legacy_shm_write16(dev, B43legacy_SHM_SHARED, 0x0034, | |
| 0x0000); | |
| } | |
| /* Probe Response Timeout value */ | |
| /* FIXME: Default to 0, has to be set by ioctl probably... :-/ */ | |
| b43legacy_shm_write16(dev, B43legacy_SHM_SHARED, 0x0074, 0x0000); | |
| /* Initially set the wireless operation mode. */ | |
| b43legacy_adjust_opmode(dev); | |
| if (dev->dev->id.revision < 3) { | |
| b43legacy_write16(dev, 0x060E, 0x0000); | |
| b43legacy_write16(dev, 0x0610, 0x8000); | |
| b43legacy_write16(dev, 0x0604, 0x0000); | |
| b43legacy_write16(dev, 0x0606, 0x0200); | |
| } else { | |
| b43legacy_write32(dev, 0x0188, 0x80000000); | |
| b43legacy_write32(dev, 0x018C, 0x02000000); | |
| } | |
| b43legacy_write32(dev, B43legacy_MMIO_GEN_IRQ_REASON, 0x00004000); | |
| b43legacy_write32(dev, B43legacy_MMIO_DMA0_IRQ_MASK, 0x0001DC00); | |
| b43legacy_write32(dev, B43legacy_MMIO_DMA1_IRQ_MASK, 0x0000DC00); | |
| b43legacy_write32(dev, B43legacy_MMIO_DMA2_IRQ_MASK, 0x0000DC00); | |
| b43legacy_write32(dev, B43legacy_MMIO_DMA3_IRQ_MASK, 0x0001DC00); | |
| b43legacy_write32(dev, B43legacy_MMIO_DMA4_IRQ_MASK, 0x0000DC00); | |
| b43legacy_write32(dev, B43legacy_MMIO_DMA5_IRQ_MASK, 0x0000DC00); | |
| value32 = ssb_read32(dev->dev, SSB_TMSLOW); | |
| value32 |= B43legacy_TMSLOW_MACPHYCLKEN; | |
| ssb_write32(dev->dev, SSB_TMSLOW, value32); | |
| b43legacy_write16(dev, B43legacy_MMIO_POWERUP_DELAY, | |
| dev->dev->bus->chipco.fast_pwrup_delay); | |
| /* PHY TX errors counter. */ | |
| atomic_set(&phy->txerr_cnt, B43legacy_PHY_TX_BADNESS_LIMIT); | |
| B43legacy_WARN_ON(err != 0); | |
| b43legacydbg(dev->wl, "Chip initialized\n"); | |
| out: | |
| return err; | |
| err_radio_off: | |
| b43legacy_radio_turn_off(dev, 1); | |
| err_gpio_clean: | |
| b43legacy_gpio_cleanup(dev); | |
| goto out; | |
| } | |
| static void b43legacy_periodic_every120sec(struct b43legacy_wldev *dev) | |
| { | |
| struct b43legacy_phy *phy = &dev->phy; | |
| if (phy->type != B43legacy_PHYTYPE_G || phy->rev < 2) | |
| return; | |
| b43legacy_mac_suspend(dev); | |
| b43legacy_phy_lo_g_measure(dev); | |
| b43legacy_mac_enable(dev); | |
| } | |
| static void b43legacy_periodic_every60sec(struct b43legacy_wldev *dev) | |
| { | |
| b43legacy_phy_lo_mark_all_unused(dev); | |
| if (dev->dev->bus->sprom.boardflags_lo & B43legacy_BFL_RSSI) { | |
| b43legacy_mac_suspend(dev); | |
| b43legacy_calc_nrssi_slope(dev); | |
| b43legacy_mac_enable(dev); | |
| } | |
| } | |
| static void b43legacy_periodic_every30sec(struct b43legacy_wldev *dev) | |
| { | |
| /* Update device statistics. */ | |
| b43legacy_calculate_link_quality(dev); | |
| } | |
| static void b43legacy_periodic_every15sec(struct b43legacy_wldev *dev) | |
| { | |
| b43legacy_phy_xmitpower(dev); /* FIXME: unless scanning? */ | |
| atomic_set(&dev->phy.txerr_cnt, B43legacy_PHY_TX_BADNESS_LIMIT); | |
| wmb(); | |
| } | |
| static void do_periodic_work(struct b43legacy_wldev *dev) | |
| { | |
| unsigned int state; | |
| state = dev->periodic_state; | |
| if (state % 8 == 0) | |
| b43legacy_periodic_every120sec(dev); | |
| if (state % 4 == 0) | |
| b43legacy_periodic_every60sec(dev); | |
| if (state % 2 == 0) | |
| b43legacy_periodic_every30sec(dev); | |
| b43legacy_periodic_every15sec(dev); | |
| } | |
| /* Periodic work locking policy: | |
| * The whole periodic work handler is protected by | |
| * wl->mutex. If another lock is needed somewhere in the | |
| * pwork callchain, it's acquired in-place, where it's needed. | |
| */ | |
| static void b43legacy_periodic_work_handler(struct work_struct *work) | |
| { | |
| struct b43legacy_wldev *dev = container_of(work, struct b43legacy_wldev, | |
| periodic_work.work); | |
| struct b43legacy_wl *wl = dev->wl; | |
| unsigned long delay; | |
| mutex_lock(&wl->mutex); | |
| if (unlikely(b43legacy_status(dev) != B43legacy_STAT_STARTED)) | |
| goto out; | |
| if (b43legacy_debug(dev, B43legacy_DBG_PWORK_STOP)) | |
| goto out_requeue; | |
| do_periodic_work(dev); | |
| dev->periodic_state++; | |
| out_requeue: | |
| if (b43legacy_debug(dev, B43legacy_DBG_PWORK_FAST)) | |
| delay = msecs_to_jiffies(50); | |
| else | |
| delay = round_jiffies_relative(HZ * 15); | |
| ieee80211_queue_delayed_work(wl->hw, &dev->periodic_work, delay); | |
| out: | |
| mutex_unlock(&wl->mutex); | |
| } | |
| static void b43legacy_periodic_tasks_setup(struct b43legacy_wldev *dev) | |
| { | |
| struct delayed_work *work = &dev->periodic_work; | |
| dev->periodic_state = 0; | |
| INIT_DELAYED_WORK(work, b43legacy_periodic_work_handler); | |
| ieee80211_queue_delayed_work(dev->wl->hw, work, 0); | |
| } | |
| /* Validate access to the chip (SHM) */ | |
| static int b43legacy_validate_chipaccess(struct b43legacy_wldev *dev) | |
| { | |
| u32 value; | |
| u32 shm_backup; | |
| shm_backup = b43legacy_shm_read32(dev, B43legacy_SHM_SHARED, 0); | |
| b43legacy_shm_write32(dev, B43legacy_SHM_SHARED, 0, 0xAA5555AA); | |
| if (b43legacy_shm_read32(dev, B43legacy_SHM_SHARED, 0) != | |
| 0xAA5555AA) | |
| goto error; | |
| b43legacy_shm_write32(dev, B43legacy_SHM_SHARED, 0, 0x55AAAA55); | |
| if (b43legacy_shm_read32(dev, B43legacy_SHM_SHARED, 0) != | |
| 0x55AAAA55) | |
| goto error; | |
| b43legacy_shm_write32(dev, B43legacy_SHM_SHARED, 0, shm_backup); | |
| value = b43legacy_read32(dev, B43legacy_MMIO_MACCTL); | |
| if ((value | B43legacy_MACCTL_GMODE) != | |
| (B43legacy_MACCTL_GMODE | B43legacy_MACCTL_IHR_ENABLED)) | |
| goto error; | |
| value = b43legacy_read32(dev, B43legacy_MMIO_GEN_IRQ_REASON); | |
| if (value) | |
| goto error; | |
| return 0; | |
| error: | |
| b43legacyerr(dev->wl, "Failed to validate the chipaccess\n"); | |
| return -ENODEV; | |
| } | |
| static void b43legacy_security_init(struct b43legacy_wldev *dev) | |
| { | |
| dev->max_nr_keys = (dev->dev->id.revision >= 5) ? 58 : 20; | |
| B43legacy_WARN_ON(dev->max_nr_keys > ARRAY_SIZE(dev->key)); | |
| dev->ktp = b43legacy_shm_read16(dev, B43legacy_SHM_SHARED, | |
| 0x0056); | |
| /* KTP is a word address, but we address SHM bytewise. | |
| * So multiply by two. | |
| */ | |
| dev->ktp *= 2; | |
| if (dev->dev->id.revision >= 5) | |
| /* Number of RCMTA address slots */ | |
| b43legacy_write16(dev, B43legacy_MMIO_RCMTA_COUNT, | |
| dev->max_nr_keys - 8); | |
| } | |
| #ifdef CONFIG_B43LEGACY_HWRNG | |
| static int b43legacy_rng_read(struct hwrng *rng, u32 *data) | |
| { | |
| struct b43legacy_wl *wl = (struct b43legacy_wl *)rng->priv; | |
| unsigned long flags; | |
| /* Don't take wl->mutex here, as it could deadlock with | |
| * hwrng internal locking. It's not needed to take | |
| * wl->mutex here, anyway. */ | |
| spin_lock_irqsave(&wl->irq_lock, flags); | |
| *data = b43legacy_read16(wl->current_dev, B43legacy_MMIO_RNG); | |
| spin_unlock_irqrestore(&wl->irq_lock, flags); | |
| return (sizeof(u16)); | |
| } | |
| #endif | |
| static void b43legacy_rng_exit(struct b43legacy_wl *wl) | |
| { | |
| #ifdef CONFIG_B43LEGACY_HWRNG | |
| if (wl->rng_initialized) | |
| hwrng_unregister(&wl->rng); | |
| #endif | |
| } | |
| static int b43legacy_rng_init(struct b43legacy_wl *wl) | |
| { | |
| int err = 0; | |
| #ifdef CONFIG_B43LEGACY_HWRNG | |
| snprintf(wl->rng_name, ARRAY_SIZE(wl->rng_name), | |
| "%s_%s", KBUILD_MODNAME, wiphy_name(wl->hw->wiphy)); | |
| wl->rng.name = wl->rng_name; | |
| wl->rng.data_read = b43legacy_rng_read; | |
| wl->rng.priv = (unsigned long)wl; | |
| wl->rng_initialized = 1; | |
| err = hwrng_register(&wl->rng); | |
| if (err) { | |
| wl->rng_initialized = 0; | |
| b43legacyerr(wl, "Failed to register the random " | |
| "number generator (%d)\n", err); | |
| } | |
| #endif | |
| return err; | |
| } | |
| static void b43legacy_tx_work(struct work_struct *work) | |
| { | |
| struct b43legacy_wl *wl = container_of(work, struct b43legacy_wl, | |
| tx_work); | |
| struct b43legacy_wldev *dev; | |
| struct sk_buff *skb; | |
| int queue_num; | |
| int err = 0; | |
| mutex_lock(&wl->mutex); | |
| dev = wl->current_dev; | |
| if (unlikely(!dev || b43legacy_status(dev) < B43legacy_STAT_STARTED)) { | |
| mutex_unlock(&wl->mutex); | |
| return; | |
| } | |
| for (queue_num = 0; queue_num < B43legacy_QOS_QUEUE_NUM; queue_num++) { | |
| while (skb_queue_len(&wl->tx_queue[queue_num])) { | |
| skb = skb_dequeue(&wl->tx_queue[queue_num]); | |
| if (b43legacy_using_pio(dev)) | |
| err = b43legacy_pio_tx(dev, skb); | |
| else | |
| err = b43legacy_dma_tx(dev, skb); | |
| if (err == -ENOSPC) { | |
| wl->tx_queue_stopped[queue_num] = 1; | |
| ieee80211_stop_queue(wl->hw, queue_num); | |
| skb_queue_head(&wl->tx_queue[queue_num], skb); | |
| break; | |
| } | |
| if (unlikely(err)) | |
| dev_kfree_skb(skb); /* Drop it */ | |
| err = 0; | |
| } | |
| if (!err) | |
| wl->tx_queue_stopped[queue_num] = 0; | |
| } | |
| mutex_unlock(&wl->mutex); | |
| } | |
| static void b43legacy_op_tx(struct ieee80211_hw *hw, | |
| struct ieee80211_tx_control *control, | |
| struct sk_buff *skb) | |
| { | |
| struct b43legacy_wl *wl = hw_to_b43legacy_wl(hw); | |
| if (unlikely(skb->len < 2 + 2 + 6)) { | |
| /* Too short, this can't be a valid frame. */ | |
| dev_kfree_skb_any(skb); | |
| return; | |
| } | |
| B43legacy_WARN_ON(skb_shinfo(skb)->nr_frags); | |
| skb_queue_tail(&wl->tx_queue[skb->queue_mapping], skb); | |
| if (!wl->tx_queue_stopped[skb->queue_mapping]) | |
| ieee80211_queue_work(wl->hw, &wl->tx_work); | |
| else | |
| ieee80211_stop_queue(wl->hw, skb->queue_mapping); | |
| } | |
| static int b43legacy_op_conf_tx(struct ieee80211_hw *hw, | |
| struct ieee80211_vif *vif, u16 queue, | |
| const struct ieee80211_tx_queue_params *params) | |
| { | |
| return 0; | |
| } | |
| static int b43legacy_op_get_stats(struct ieee80211_hw *hw, | |
| struct ieee80211_low_level_stats *stats) | |
| { | |
| struct b43legacy_wl *wl = hw_to_b43legacy_wl(hw); | |
| unsigned long flags; | |
| spin_lock_irqsave(&wl->irq_lock, flags); | |
| memcpy(stats, &wl->ieee_stats, sizeof(*stats)); | |
| spin_unlock_irqrestore(&wl->irq_lock, flags); | |
| return 0; | |
| } | |
| static const char *phymode_to_string(unsigned int phymode) | |
| { | |
| switch (phymode) { | |
| case B43legacy_PHYMODE_B: | |
| return "B"; | |
| case B43legacy_PHYMODE_G: | |
| return "G"; | |
| default: | |
| B43legacy_BUG_ON(1); | |
| } | |
| return ""; | |
| } | |
| static int find_wldev_for_phymode(struct b43legacy_wl *wl, | |
| unsigned int phymode, | |
| struct b43legacy_wldev **dev, | |
| bool *gmode) | |
| { | |
| struct b43legacy_wldev *d; | |
| list_for_each_entry(d, &wl->devlist, list) { | |
| if (d->phy.possible_phymodes & phymode) { | |
| /* Ok, this device supports the PHY-mode. | |
| * Set the gmode bit. */ | |
| *gmode = true; | |
| *dev = d; | |
| return 0; | |
| } | |
| } | |
| return -ESRCH; | |
| } | |
| static void b43legacy_put_phy_into_reset(struct b43legacy_wldev *dev) | |
| { | |
| struct ssb_device *sdev = dev->dev; | |
| u32 tmslow; | |
| tmslow = ssb_read32(sdev, SSB_TMSLOW); | |
| tmslow &= ~B43legacy_TMSLOW_GMODE; | |
| tmslow |= B43legacy_TMSLOW_PHYRESET; | |
| tmslow |= SSB_TMSLOW_FGC; | |
| ssb_write32(sdev, SSB_TMSLOW, tmslow); | |
| msleep(1); | |
| tmslow = ssb_read32(sdev, SSB_TMSLOW); | |
| tmslow &= ~SSB_TMSLOW_FGC; | |
| tmslow |= B43legacy_TMSLOW_PHYRESET; | |
| ssb_write32(sdev, SSB_TMSLOW, tmslow); | |
| msleep(1); | |
| } | |
| /* Expects wl->mutex locked */ | |
| static int b43legacy_switch_phymode(struct b43legacy_wl *wl, | |
| unsigned int new_mode) | |
| { | |
| struct b43legacy_wldev *uninitialized_var(up_dev); | |
| struct b43legacy_wldev *down_dev; | |
| int err; | |
| bool gmode = false; | |
| int prev_status; | |
| err = find_wldev_for_phymode(wl, new_mode, &up_dev, &gmode); | |
| if (err) { | |
| b43legacyerr(wl, "Could not find a device for %s-PHY mode\n", | |
| phymode_to_string(new_mode)); | |
| return err; | |
| } | |
| if ((up_dev == wl->current_dev) && | |
| (!!wl->current_dev->phy.gmode == !!gmode)) | |
| /* This device is already running. */ | |
| return 0; | |
| b43legacydbg(wl, "Reconfiguring PHYmode to %s-PHY\n", | |
| phymode_to_string(new_mode)); | |
| down_dev = wl->current_dev; | |
| prev_status = b43legacy_status(down_dev); | |
| /* Shutdown the currently running core. */ | |
| if (prev_status >= B43legacy_STAT_STARTED) | |
| b43legacy_wireless_core_stop(down_dev); | |
| if (prev_status >= B43legacy_STAT_INITIALIZED) | |
| b43legacy_wireless_core_exit(down_dev); | |
| if (down_dev != up_dev) | |
| /* We switch to a different core, so we put PHY into | |
| * RESET on the old core. */ | |
| b43legacy_put_phy_into_reset(down_dev); | |
| /* Now start the new core. */ | |
| up_dev->phy.gmode = gmode; | |
| if (prev_status >= B43legacy_STAT_INITIALIZED) { | |
| err = b43legacy_wireless_core_init(up_dev); | |
| if (err) { | |
| b43legacyerr(wl, "Fatal: Could not initialize device" | |
| " for newly selected %s-PHY mode\n", | |
| phymode_to_string(new_mode)); | |
| goto init_failure; | |
| } | |
| } | |
| if (prev_status >= B43legacy_STAT_STARTED) { | |
| err = b43legacy_wireless_core_start(up_dev); | |
| if (err) { | |
| b43legacyerr(wl, "Fatal: Could not start device for " | |
| "newly selected %s-PHY mode\n", | |
| phymode_to_string(new_mode)); | |
| b43legacy_wireless_core_exit(up_dev); | |
| goto init_failure; | |
| } | |
| } | |
| B43legacy_WARN_ON(b43legacy_status(up_dev) != prev_status); | |
| b43legacy_shm_write32(up_dev, B43legacy_SHM_SHARED, 0x003E, 0); | |
| wl->current_dev = up_dev; | |
| return 0; | |
| init_failure: | |
| /* Whoops, failed to init the new core. No core is operating now. */ | |
| wl->current_dev = NULL; | |
| return err; | |
| } | |
| /* Write the short and long frame retry limit values. */ | |
| static void b43legacy_set_retry_limits(struct b43legacy_wldev *dev, | |
| unsigned int short_retry, | |
| unsigned int long_retry) | |
| { | |
| /* The retry limit is a 4-bit counter. Enforce this to avoid overflowing | |
| * the chip-internal counter. */ | |
| short_retry = min(short_retry, (unsigned int)0xF); | |
| long_retry = min(long_retry, (unsigned int)0xF); | |
| b43legacy_shm_write16(dev, B43legacy_SHM_WIRELESS, 0x0006, short_retry); | |
| b43legacy_shm_write16(dev, B43legacy_SHM_WIRELESS, 0x0007, long_retry); | |
| } | |
| static int b43legacy_op_dev_config(struct ieee80211_hw *hw, | |
| u32 changed) | |
| { | |
| struct b43legacy_wl *wl = hw_to_b43legacy_wl(hw); | |
| struct b43legacy_wldev *dev; | |
| struct b43legacy_phy *phy; | |
| struct ieee80211_conf *conf = &hw->conf; | |
| unsigned long flags; | |
| unsigned int new_phymode = 0xFFFF; | |
| int antenna_tx; | |
| int err = 0; | |
| antenna_tx = B43legacy_ANTENNA_DEFAULT; | |
| mutex_lock(&wl->mutex); | |
| dev = wl->current_dev; | |
| phy = &dev->phy; | |
| if (changed & IEEE80211_CONF_CHANGE_RETRY_LIMITS) | |
| b43legacy_set_retry_limits(dev, | |
| conf->short_frame_max_tx_count, | |
| conf->long_frame_max_tx_count); | |
| changed &= ~IEEE80211_CONF_CHANGE_RETRY_LIMITS; | |
| if (!changed) | |
| goto out_unlock_mutex; | |
| /* Switch the PHY mode (if necessary). */ | |
| switch (conf->chandef.chan->band) { | |
| case IEEE80211_BAND_2GHZ: | |
| if (phy->type == B43legacy_PHYTYPE_B) | |
| new_phymode = B43legacy_PHYMODE_B; | |
| else | |
| new_phymode = B43legacy_PHYMODE_G; | |
| break; | |
| default: | |
| B43legacy_WARN_ON(1); | |
| } | |
| err = b43legacy_switch_phymode(wl, new_phymode); | |
| if (err) | |
| goto out_unlock_mutex; | |
| /* Disable IRQs while reconfiguring the device. | |
| * This makes it possible to drop the spinlock throughout | |
| * the reconfiguration process. */ | |
| spin_lock_irqsave(&wl->irq_lock, flags); | |
| if (b43legacy_status(dev) < B43legacy_STAT_STARTED) { | |
| spin_unlock_irqrestore(&wl->irq_lock, flags); | |
| goto out_unlock_mutex; | |
| } | |
| b43legacy_write32(dev, B43legacy_MMIO_GEN_IRQ_MASK, 0); | |
| spin_unlock_irqrestore(&wl->irq_lock, flags); | |
| b43legacy_synchronize_irq(dev); | |
| /* Switch to the requested channel. | |
| * The firmware takes care of races with the TX handler. */ | |
| if (conf->chandef.chan->hw_value != phy->channel) | |
| b43legacy_radio_selectchannel(dev, conf->chandef.chan->hw_value, | |
| 0); | |
| dev->wl->radiotap_enabled = !!(conf->flags & IEEE80211_CONF_MONITOR); | |
| /* Adjust the desired TX power level. */ | |
| if (conf->power_level != 0) { | |
| if (conf->power_level != phy->power_level) { | |
| phy->power_level = conf->power_level; | |
| b43legacy_phy_xmitpower(dev); | |
| } | |
| } | |
| /* Antennas for RX and management frame TX. */ | |
| b43legacy_mgmtframe_txantenna(dev, antenna_tx); | |
| if (wl->radio_enabled != phy->radio_on) { | |
| if (wl->radio_enabled) { | |
| b43legacy_radio_turn_on(dev); | |
| b43legacyinfo(dev->wl, "Radio turned on by software\n"); | |
| if (!dev->radio_hw_enable) | |
| b43legacyinfo(dev->wl, "The hardware RF-kill" | |
| " button still turns the radio" | |
| " physically off. Press the" | |
| " button to turn it on.\n"); | |
| } else { | |
| b43legacy_radio_turn_off(dev, 0); | |
| b43legacyinfo(dev->wl, "Radio turned off by" | |
| " software\n"); | |
| } | |
| } | |
| spin_lock_irqsave(&wl->irq_lock, flags); | |
| b43legacy_write32(dev, B43legacy_MMIO_GEN_IRQ_MASK, dev->irq_mask); | |
| mmiowb(); | |
| spin_unlock_irqrestore(&wl->irq_lock, flags); | |
| out_unlock_mutex: | |
| mutex_unlock(&wl->mutex); | |
| return err; | |
| } | |
| static void b43legacy_update_basic_rates(struct b43legacy_wldev *dev, u32 brates) | |
| { | |
| struct ieee80211_supported_band *sband = | |
| dev->wl->hw->wiphy->bands[IEEE80211_BAND_2GHZ]; | |
| struct ieee80211_rate *rate; | |
| int i; | |
| u16 basic, direct, offset, basic_offset, rateptr; | |
| for (i = 0; i < sband->n_bitrates; i++) { | |
| rate = &sband->bitrates[i]; | |
| if (b43legacy_is_cck_rate(rate->hw_value)) { | |
| direct = B43legacy_SHM_SH_CCKDIRECT; | |
| basic = B43legacy_SHM_SH_CCKBASIC; | |
| offset = b43legacy_plcp_get_ratecode_cck(rate->hw_value); | |
| offset &= 0xF; | |
| } else { | |
| direct = B43legacy_SHM_SH_OFDMDIRECT; | |
| basic = B43legacy_SHM_SH_OFDMBASIC; | |
| offset = b43legacy_plcp_get_ratecode_ofdm(rate->hw_value); | |
| offset &= 0xF; | |
| } | |
| rate = ieee80211_get_response_rate(sband, brates, rate->bitrate); | |
| if (b43legacy_is_cck_rate(rate->hw_value)) { | |
| basic_offset = b43legacy_plcp_get_ratecode_cck(rate->hw_value); | |
| basic_offset &= 0xF; | |
| } else { | |
| basic_offset = b43legacy_plcp_get_ratecode_ofdm(rate->hw_value); | |
| basic_offset &= 0xF; | |
| } | |
| /* | |
| * Get the pointer that we need to point to | |
| * from the direct map | |
| */ | |
| rateptr = b43legacy_shm_read16(dev, B43legacy_SHM_SHARED, | |
| direct + 2 * basic_offset); | |
| /* and write it to the basic map */ | |
| b43legacy_shm_write16(dev, B43legacy_SHM_SHARED, | |
| basic + 2 * offset, rateptr); | |
| } | |
| } | |
| static void b43legacy_op_bss_info_changed(struct ieee80211_hw *hw, | |
| struct ieee80211_vif *vif, | |
| struct ieee80211_bss_conf *conf, | |
| u32 changed) | |
| { | |
| struct b43legacy_wl *wl = hw_to_b43legacy_wl(hw); | |
| struct b43legacy_wldev *dev; | |
| unsigned long flags; | |
| mutex_lock(&wl->mutex); | |
| B43legacy_WARN_ON(wl->vif != vif); | |
| dev = wl->current_dev; | |
| /* Disable IRQs while reconfiguring the device. | |
| * This makes it possible to drop the spinlock throughout | |
| * the reconfiguration process. */ | |
| spin_lock_irqsave(&wl->irq_lock, flags); | |
| if (b43legacy_status(dev) < B43legacy_STAT_STARTED) { | |
| spin_unlock_irqrestore(&wl->irq_lock, flags); | |
| goto out_unlock_mutex; | |
| } | |
| b43legacy_write32(dev, B43legacy_MMIO_GEN_IRQ_MASK, 0); | |
| if (changed & BSS_CHANGED_BSSID) { | |
| b43legacy_synchronize_irq(dev); | |
| if (conf->bssid) | |
| memcpy(wl->bssid, conf->bssid, ETH_ALEN); | |
| else | |
| eth_zero_addr(wl->bssid); | |
| } | |
| if (b43legacy_status(dev) >= B43legacy_STAT_INITIALIZED) { | |
| if (changed & BSS_CHANGED_BEACON && | |
| (b43legacy_is_mode(wl, NL80211_IFTYPE_AP) || | |
| b43legacy_is_mode(wl, NL80211_IFTYPE_ADHOC))) | |
| b43legacy_update_templates(wl); | |
| if (changed & BSS_CHANGED_BSSID) | |
| b43legacy_write_mac_bssid_templates(dev); | |
| } | |
| spin_unlock_irqrestore(&wl->irq_lock, flags); | |
| b43legacy_mac_suspend(dev); | |
| if (changed & BSS_CHANGED_BEACON_INT && | |
| (b43legacy_is_mode(wl, NL80211_IFTYPE_AP) || | |
| b43legacy_is_mode(wl, NL80211_IFTYPE_ADHOC))) | |
| b43legacy_set_beacon_int(dev, conf->beacon_int); | |
| if (changed & BSS_CHANGED_BASIC_RATES) | |
| b43legacy_update_basic_rates(dev, conf->basic_rates); | |
| if (changed & BSS_CHANGED_ERP_SLOT) { | |
| if (conf->use_short_slot) | |
| b43legacy_short_slot_timing_enable(dev); | |
| else | |
| b43legacy_short_slot_timing_disable(dev); | |
| } | |
| b43legacy_mac_enable(dev); | |
| spin_lock_irqsave(&wl->irq_lock, flags); | |
| b43legacy_write32(dev, B43legacy_MMIO_GEN_IRQ_MASK, dev->irq_mask); | |
| /* XXX: why? */ | |
| mmiowb(); | |
| spin_unlock_irqrestore(&wl->irq_lock, flags); | |
| out_unlock_mutex: | |
| mutex_unlock(&wl->mutex); | |
| } | |
| static void b43legacy_op_configure_filter(struct ieee80211_hw *hw, | |
| unsigned int changed, | |
| unsigned int *fflags,u64 multicast) | |
| { | |
| struct b43legacy_wl *wl = hw_to_b43legacy_wl(hw); | |
| struct b43legacy_wldev *dev = wl->current_dev; | |
| unsigned long flags; | |
| if (!dev) { | |
| *fflags = 0; | |
| return; | |
| } | |
| spin_lock_irqsave(&wl->irq_lock, flags); | |
| *fflags &= FIF_ALLMULTI | | |
| FIF_FCSFAIL | | |
| FIF_PLCPFAIL | | |
| FIF_CONTROL | | |
| FIF_OTHER_BSS | | |
| FIF_BCN_PRBRESP_PROMISC; | |
| changed &= FIF_ALLMULTI | | |
| FIF_FCSFAIL | | |
| FIF_PLCPFAIL | | |
| FIF_CONTROL | | |
| FIF_OTHER_BSS | | |
| FIF_BCN_PRBRESP_PROMISC; | |
| wl->filter_flags = *fflags; | |
| if (changed && b43legacy_status(dev) >= B43legacy_STAT_INITIALIZED) | |
| b43legacy_adjust_opmode(dev); | |
| spin_unlock_irqrestore(&wl->irq_lock, flags); | |
| } | |
| /* Locking: wl->mutex */ | |
| static void b43legacy_wireless_core_stop(struct b43legacy_wldev *dev) | |
| { | |
| struct b43legacy_wl *wl = dev->wl; | |
| unsigned long flags; | |
| int queue_num; | |
| if (b43legacy_status(dev) < B43legacy_STAT_STARTED) | |
| return; | |
| /* Disable and sync interrupts. We must do this before than | |
| * setting the status to INITIALIZED, as the interrupt handler | |
| * won't care about IRQs then. */ | |
| spin_lock_irqsave(&wl->irq_lock, flags); | |
| b43legacy_write32(dev, B43legacy_MMIO_GEN_IRQ_MASK, 0); | |
| b43legacy_read32(dev, B43legacy_MMIO_GEN_IRQ_MASK); /* flush */ | |
| spin_unlock_irqrestore(&wl->irq_lock, flags); | |
| b43legacy_synchronize_irq(dev); | |
| b43legacy_set_status(dev, B43legacy_STAT_INITIALIZED); | |
| mutex_unlock(&wl->mutex); | |
| /* Must unlock as it would otherwise deadlock. No races here. | |
| * Cancel the possibly running self-rearming periodic work. */ | |
| cancel_delayed_work_sync(&dev->periodic_work); | |
| cancel_work_sync(&wl->tx_work); | |
| mutex_lock(&wl->mutex); | |
| /* Drain all TX queues. */ | |
| for (queue_num = 0; queue_num < B43legacy_QOS_QUEUE_NUM; queue_num++) { | |
| while (skb_queue_len(&wl->tx_queue[queue_num])) | |
| dev_kfree_skb(skb_dequeue(&wl->tx_queue[queue_num])); | |
| } | |
| b43legacy_mac_suspend(dev); | |
| free_irq(dev->dev->irq, dev); | |
| b43legacydbg(wl, "Wireless interface stopped\n"); | |
| } | |
| /* Locking: wl->mutex */ | |
| static int b43legacy_wireless_core_start(struct b43legacy_wldev *dev) | |
| { | |
| int err; | |
| B43legacy_WARN_ON(b43legacy_status(dev) != B43legacy_STAT_INITIALIZED); | |
| drain_txstatus_queue(dev); | |
| err = request_irq(dev->dev->irq, b43legacy_interrupt_handler, | |
| IRQF_SHARED, KBUILD_MODNAME, dev); | |
| if (err) { | |
| b43legacyerr(dev->wl, "Cannot request IRQ-%d\n", | |
| dev->dev->irq); | |
| goto out; | |
| } | |
| /* We are ready to run. */ | |
| ieee80211_wake_queues(dev->wl->hw); | |
| b43legacy_set_status(dev, B43legacy_STAT_STARTED); | |
| /* Start data flow (TX/RX) */ | |
| b43legacy_mac_enable(dev); | |
| b43legacy_write32(dev, B43legacy_MMIO_GEN_IRQ_MASK, dev->irq_mask); | |
| /* Start maintenance work */ | |
| b43legacy_periodic_tasks_setup(dev); | |
| b43legacydbg(dev->wl, "Wireless interface started\n"); | |
| out: | |
| return err; | |
| } | |
| /* Get PHY and RADIO versioning numbers */ | |
| static int b43legacy_phy_versioning(struct b43legacy_wldev *dev) | |
| { | |
| struct b43legacy_phy *phy = &dev->phy; | |
| u32 tmp; | |
| u8 analog_type; | |
| u8 phy_type; | |
| u8 phy_rev; | |
| u16 radio_manuf; | |
| u16 radio_ver; | |
| u16 radio_rev; | |
| int unsupported = 0; | |
| /* Get PHY versioning */ | |
| tmp = b43legacy_read16(dev, B43legacy_MMIO_PHY_VER); | |
| analog_type = (tmp & B43legacy_PHYVER_ANALOG) | |
| >> B43legacy_PHYVER_ANALOG_SHIFT; | |
| phy_type = (tmp & B43legacy_PHYVER_TYPE) >> B43legacy_PHYVER_TYPE_SHIFT; | |
| phy_rev = (tmp & B43legacy_PHYVER_VERSION); | |
| switch (phy_type) { | |
| case B43legacy_PHYTYPE_B: | |
| if (phy_rev != 2 && phy_rev != 4 | |
| && phy_rev != 6 && phy_rev != 7) | |
| unsupported = 1; | |
| break; | |
| case B43legacy_PHYTYPE_G: | |
| if (phy_rev > 8) | |
| unsupported = 1; | |
| break; | |
| default: | |
| unsupported = 1; | |
| } | |
| if (unsupported) { | |
| b43legacyerr(dev->wl, "FOUND UNSUPPORTED PHY " | |
| "(Analog %u, Type %u, Revision %u)\n", | |
| analog_type, phy_type, phy_rev); | |
| return -EOPNOTSUPP; | |
| } | |
| b43legacydbg(dev->wl, "Found PHY: Analog %u, Type %u, Revision %u\n", | |
| analog_type, phy_type, phy_rev); | |
| /* Get RADIO versioning */ | |
| if (dev->dev->bus->chip_id == 0x4317) { | |
| if (dev->dev->bus->chip_rev == 0) | |
| tmp = 0x3205017F; | |
| else if (dev->dev->bus->chip_rev == 1) | |
| tmp = 0x4205017F; | |
| else | |
| tmp = 0x5205017F; | |
| } else { | |
| b43legacy_write16(dev, B43legacy_MMIO_RADIO_CONTROL, | |
| B43legacy_RADIOCTL_ID); | |
| tmp = b43legacy_read16(dev, B43legacy_MMIO_RADIO_DATA_HIGH); | |
| tmp <<= 16; | |
| b43legacy_write16(dev, B43legacy_MMIO_RADIO_CONTROL, | |
| B43legacy_RADIOCTL_ID); | |
| tmp |= b43legacy_read16(dev, B43legacy_MMIO_RADIO_DATA_LOW); | |
| } | |
| radio_manuf = (tmp & 0x00000FFF); | |
| radio_ver = (tmp & 0x0FFFF000) >> 12; | |
| radio_rev = (tmp & 0xF0000000) >> 28; | |
| switch (phy_type) { | |
| case B43legacy_PHYTYPE_B: | |
| if ((radio_ver & 0xFFF0) != 0x2050) | |
| unsupported = 1; | |
| break; | |
| case B43legacy_PHYTYPE_G: | |
| if (radio_ver != 0x2050) | |
| unsupported = 1; | |
| break; | |
| default: | |
| B43legacy_BUG_ON(1); | |
| } | |
| if (unsupported) { | |
| b43legacyerr(dev->wl, "FOUND UNSUPPORTED RADIO " | |
| "(Manuf 0x%X, Version 0x%X, Revision %u)\n", | |
| radio_manuf, radio_ver, radio_rev); | |
| return -EOPNOTSUPP; | |
| } | |
| b43legacydbg(dev->wl, "Found Radio: Manuf 0x%X, Version 0x%X," | |
| " Revision %u\n", radio_manuf, radio_ver, radio_rev); | |
| phy->radio_manuf = radio_manuf; | |
| phy->radio_ver = radio_ver; | |
| phy->radio_rev = radio_rev; | |
| phy->analog = analog_type; | |
| phy->type = phy_type; | |
| phy->rev = phy_rev; | |
| return 0; | |
| } | |
| static void setup_struct_phy_for_init(struct b43legacy_wldev *dev, | |
| struct b43legacy_phy *phy) | |
| { | |
| struct b43legacy_lopair *lo; | |
| int i; | |
| memset(phy->minlowsig, 0xFF, sizeof(phy->minlowsig)); | |
| memset(phy->minlowsigpos, 0, sizeof(phy->minlowsigpos)); | |
| /* Assume the radio is enabled. If it's not enabled, the state will | |
| * immediately get fixed on the first periodic work run. */ | |
| dev->radio_hw_enable = true; | |
| phy->savedpctlreg = 0xFFFF; | |
| phy->aci_enable = false; | |
| phy->aci_wlan_automatic = false; | |
| phy->aci_hw_rssi = false; | |
| lo = phy->_lo_pairs; | |
| if (lo) | |
| memset(lo, 0, sizeof(struct b43legacy_lopair) * | |
| B43legacy_LO_COUNT); | |
| phy->max_lb_gain = 0; | |
| phy->trsw_rx_gain = 0; | |
| /* Set default attenuation values. */ | |
| phy->bbatt = b43legacy_default_baseband_attenuation(dev); | |
| phy->rfatt = b43legacy_default_radio_attenuation(dev); | |
| phy->txctl1 = b43legacy_default_txctl1(dev); | |
| phy->txpwr_offset = 0; | |
| /* NRSSI */ | |
| phy->nrssislope = 0; | |
| for (i = 0; i < ARRAY_SIZE(phy->nrssi); i++) | |
| phy->nrssi[i] = -1000; | |
| for (i = 0; i < ARRAY_SIZE(phy->nrssi_lt); i++) | |
| phy->nrssi_lt[i] = i; | |
| phy->lofcal = 0xFFFF; | |
| phy->initval = 0xFFFF; | |
| phy->interfmode = B43legacy_INTERFMODE_NONE; | |
| phy->channel = 0xFF; | |
| } | |
| static void setup_struct_wldev_for_init(struct b43legacy_wldev *dev) | |
| { | |
| /* Flags */ | |
| dev->dfq_valid = false; | |
| /* Stats */ | |
| memset(&dev->stats, 0, sizeof(dev->stats)); | |
| setup_struct_phy_for_init(dev, &dev->phy); | |
| /* IRQ related flags */ | |
| dev->irq_reason = 0; | |
| memset(dev->dma_reason, 0, sizeof(dev->dma_reason)); | |
| dev->irq_mask = B43legacy_IRQ_MASKTEMPLATE; | |
| dev->mac_suspended = 1; | |
| /* Noise calculation context */ | |
| memset(&dev->noisecalc, 0, sizeof(dev->noisecalc)); | |
| } | |
| static void b43legacy_set_synth_pu_delay(struct b43legacy_wldev *dev, | |
| bool idle) { | |
| u16 pu_delay = 1050; | |
| if (b43legacy_is_mode(dev->wl, NL80211_IFTYPE_ADHOC) || idle) | |
| pu_delay = 500; | |
| if ((dev->phy.radio_ver == 0x2050) && (dev->phy.radio_rev == 8)) | |
| pu_delay = max(pu_delay, (u16)2400); | |
| b43legacy_shm_write16(dev, B43legacy_SHM_SHARED, | |
| B43legacy_SHM_SH_SPUWKUP, pu_delay); | |
| } | |
| /* Set the TSF CFP pre-TargetBeaconTransmissionTime. */ | |
| static void b43legacy_set_pretbtt(struct b43legacy_wldev *dev) | |
| { | |
| u16 pretbtt; | |
| /* The time value is in microseconds. */ | |
| if (b43legacy_is_mode(dev->wl, NL80211_IFTYPE_ADHOC)) | |
| pretbtt = 2; | |
| else | |
| pretbtt = 250; | |
| b43legacy_shm_write16(dev, B43legacy_SHM_SHARED, | |
| B43legacy_SHM_SH_PRETBTT, pretbtt); | |
| b43legacy_write16(dev, B43legacy_MMIO_TSF_CFP_PRETBTT, pretbtt); | |
| } | |
| /* Shutdown a wireless core */ | |
| /* Locking: wl->mutex */ | |
| static void b43legacy_wireless_core_exit(struct b43legacy_wldev *dev) | |
| { | |
| struct b43legacy_phy *phy = &dev->phy; | |
| u32 macctl; | |
| B43legacy_WARN_ON(b43legacy_status(dev) > B43legacy_STAT_INITIALIZED); | |
| if (b43legacy_status(dev) != B43legacy_STAT_INITIALIZED) | |
| return; | |
| b43legacy_set_status(dev, B43legacy_STAT_UNINIT); | |
| /* Stop the microcode PSM. */ | |
| macctl = b43legacy_read32(dev, B43legacy_MMIO_MACCTL); | |
| macctl &= ~B43legacy_MACCTL_PSM_RUN; | |
| macctl |= B43legacy_MACCTL_PSM_JMP0; | |
| b43legacy_write32(dev, B43legacy_MMIO_MACCTL, macctl); | |
| b43legacy_leds_exit(dev); | |
| b43legacy_rng_exit(dev->wl); | |
| b43legacy_pio_free(dev); | |
| b43legacy_dma_free(dev); | |
| b43legacy_chip_exit(dev); | |
| b43legacy_radio_turn_off(dev, 1); | |
| b43legacy_switch_analog(dev, 0); | |
| if (phy->dyn_tssi_tbl) | |
| kfree(phy->tssi2dbm); | |
| kfree(phy->lo_control); | |
| phy->lo_control = NULL; | |
| if (dev->wl->current_beacon) { | |
| dev_kfree_skb_any(dev->wl->current_beacon); | |
| dev->wl->current_beacon = NULL; | |
| } | |
| ssb_device_disable(dev->dev, 0); | |
| ssb_bus_may_powerdown(dev->dev->bus); | |
| } | |
| static void prepare_phy_data_for_init(struct b43legacy_wldev *dev) | |
| { | |
| struct b43legacy_phy *phy = &dev->phy; | |
| int i; | |
| /* Set default attenuation values. */ | |
| phy->bbatt = b43legacy_default_baseband_attenuation(dev); | |
| phy->rfatt = b43legacy_default_radio_attenuation(dev); | |
| phy->txctl1 = b43legacy_default_txctl1(dev); | |
| phy->txctl2 = 0xFFFF; | |
| phy->txpwr_offset = 0; | |
| /* NRSSI */ | |
| phy->nrssislope = 0; | |
| for (i = 0; i < ARRAY_SIZE(phy->nrssi); i++) | |
| phy->nrssi[i] = -1000; | |
| for (i = 0; i < ARRAY_SIZE(phy->nrssi_lt); i++) | |
| phy->nrssi_lt[i] = i; | |
| phy->lofcal = 0xFFFF; | |
| phy->initval = 0xFFFF; | |
| phy->aci_enable = false; | |
| phy->aci_wlan_automatic = false; | |
| phy->aci_hw_rssi = false; | |
| phy->antenna_diversity = 0xFFFF; | |
| memset(phy->minlowsig, 0xFF, sizeof(phy->minlowsig)); | |
| memset(phy->minlowsigpos, 0, sizeof(phy->minlowsigpos)); | |
| /* Flags */ | |
| phy->calibrated = 0; | |
| if (phy->_lo_pairs) | |
| memset(phy->_lo_pairs, 0, | |
| sizeof(struct b43legacy_lopair) * B43legacy_LO_COUNT); | |
| memset(phy->loopback_gain, 0, sizeof(phy->loopback_gain)); | |
| } | |
| /* Initialize a wireless core */ | |
| static int b43legacy_wireless_core_init(struct b43legacy_wldev *dev) | |
| { | |
| struct b43legacy_wl *wl = dev->wl; | |
| struct ssb_bus *bus = dev->dev->bus; | |
| struct b43legacy_phy *phy = &dev->phy; | |
| struct ssb_sprom *sprom = &dev->dev->bus->sprom; | |
| int err; | |
| u32 hf; | |
| u32 tmp; | |
| B43legacy_WARN_ON(b43legacy_status(dev) != B43legacy_STAT_UNINIT); | |
| err = ssb_bus_powerup(bus, 0); | |
| if (err) | |
| goto out; | |
| if (!ssb_device_is_enabled(dev->dev)) { | |
| tmp = phy->gmode ? B43legacy_TMSLOW_GMODE : 0; | |
| b43legacy_wireless_core_reset(dev, tmp); | |
| } | |
| if ((phy->type == B43legacy_PHYTYPE_B) || | |
| (phy->type == B43legacy_PHYTYPE_G)) { | |
| phy->_lo_pairs = kzalloc(sizeof(struct b43legacy_lopair) | |
| * B43legacy_LO_COUNT, | |
| GFP_KERNEL); | |
| if (!phy->_lo_pairs) | |
| return -ENOMEM; | |
| } | |
| setup_struct_wldev_for_init(dev); | |
| err = b43legacy_phy_init_tssi2dbm_table(dev); | |
| if (err) | |
| goto err_kfree_lo_control; | |
| /* Enable IRQ routing to this device. */ | |
| ssb_pcicore_dev_irqvecs_enable(&bus->pcicore, dev->dev); | |
| prepare_phy_data_for_init(dev); | |
| b43legacy_phy_calibrate(dev); | |
| err = b43legacy_chip_init(dev); | |
| if (err) | |
| goto err_kfree_tssitbl; | |
| b43legacy_shm_write16(dev, B43legacy_SHM_SHARED, | |
| B43legacy_SHM_SH_WLCOREREV, | |
| dev->dev->id.revision); | |
| hf = b43legacy_hf_read(dev); | |
| if (phy->type == B43legacy_PHYTYPE_G) { | |
| hf |= B43legacy_HF_SYMW; | |
| if (phy->rev == 1) | |
| hf |= B43legacy_HF_GDCW; | |
| if (sprom->boardflags_lo & B43legacy_BFL_PACTRL) | |
| hf |= B43legacy_HF_OFDMPABOOST; | |
| } else if (phy->type == B43legacy_PHYTYPE_B) { | |
| hf |= B43legacy_HF_SYMW; | |
| if (phy->rev >= 2 && phy->radio_ver == 0x2050) | |
| hf &= ~B43legacy_HF_GDCW; | |
| } | |
| b43legacy_hf_write(dev, hf); | |
| b43legacy_set_retry_limits(dev, | |
| B43legacy_DEFAULT_SHORT_RETRY_LIMIT, | |
| B43legacy_DEFAULT_LONG_RETRY_LIMIT); | |
| b43legacy_shm_write16(dev, B43legacy_SHM_SHARED, | |
| 0x0044, 3); | |
| b43legacy_shm_write16(dev, B43legacy_SHM_SHARED, | |
| 0x0046, 2); | |
| /* Disable sending probe responses from firmware. | |
| * Setting the MaxTime to one usec will always trigger | |
| * a timeout, so we never send any probe resp. | |
| * A timeout of zero is infinite. */ | |
| b43legacy_shm_write16(dev, B43legacy_SHM_SHARED, | |
| B43legacy_SHM_SH_PRMAXTIME, 1); | |
| b43legacy_rate_memory_init(dev); | |
| /* Minimum Contention Window */ | |
| if (phy->type == B43legacy_PHYTYPE_B) | |
| b43legacy_shm_write16(dev, B43legacy_SHM_WIRELESS, | |
| 0x0003, 31); | |
| else | |
| b43legacy_shm_write16(dev, B43legacy_SHM_WIRELESS, | |
| 0x0003, 15); | |
| /* Maximum Contention Window */ | |
| b43legacy_shm_write16(dev, B43legacy_SHM_WIRELESS, | |
| 0x0004, 1023); | |
| do { | |
| if (b43legacy_using_pio(dev)) | |
| err = b43legacy_pio_init(dev); | |
| else { | |
| err = b43legacy_dma_init(dev); | |
| if (!err) | |
| b43legacy_qos_init(dev); | |
| } | |
| } while (err == -EAGAIN); | |
| if (err) | |
| goto err_chip_exit; | |
| b43legacy_set_synth_pu_delay(dev, 1); | |
| ssb_bus_powerup(bus, 1); /* Enable dynamic PCTL */ | |
| b43legacy_upload_card_macaddress(dev); | |
| b43legacy_security_init(dev); | |
| b43legacy_rng_init(wl); | |
| ieee80211_wake_queues(dev->wl->hw); | |
| b43legacy_set_status(dev, B43legacy_STAT_INITIALIZED); | |
| b43legacy_leds_init(dev); | |
| out: | |
| return err; | |
| err_chip_exit: | |
| b43legacy_chip_exit(dev); | |
| err_kfree_tssitbl: | |
| if (phy->dyn_tssi_tbl) | |
| kfree(phy->tssi2dbm); | |
| err_kfree_lo_control: | |
| kfree(phy->lo_control); | |
| phy->lo_control = NULL; | |
| ssb_bus_may_powerdown(bus); | |
| B43legacy_WARN_ON(b43legacy_status(dev) != B43legacy_STAT_UNINIT); | |
| return err; | |
| } | |
| static int b43legacy_op_add_interface(struct ieee80211_hw *hw, | |
| struct ieee80211_vif *vif) | |
| { | |
| struct b43legacy_wl *wl = hw_to_b43legacy_wl(hw); | |
| struct b43legacy_wldev *dev; | |
| unsigned long flags; | |
| int err = -EOPNOTSUPP; | |
| /* TODO: allow WDS/AP devices to coexist */ | |
| if (vif->type != NL80211_IFTYPE_AP && | |
| vif->type != NL80211_IFTYPE_STATION && | |
| vif->type != NL80211_IFTYPE_WDS && | |
| vif->type != NL80211_IFTYPE_ADHOC) | |
| return -EOPNOTSUPP; | |
| mutex_lock(&wl->mutex); | |
| if (wl->operating) | |
| goto out_mutex_unlock; | |
| b43legacydbg(wl, "Adding Interface type %d\n", vif->type); | |
| dev = wl->current_dev; | |
| wl->operating = true; | |
| wl->vif = vif; | |
| wl->if_type = vif->type; | |
| memcpy(wl->mac_addr, vif->addr, ETH_ALEN); | |
| spin_lock_irqsave(&wl->irq_lock, flags); | |
| b43legacy_adjust_opmode(dev); | |
| b43legacy_set_pretbtt(dev); | |
| b43legacy_set_synth_pu_delay(dev, 0); | |
| b43legacy_upload_card_macaddress(dev); | |
| spin_unlock_irqrestore(&wl->irq_lock, flags); | |
| err = 0; | |
| out_mutex_unlock: | |
| mutex_unlock(&wl->mutex); | |
| return err; | |
| } | |
| static void b43legacy_op_remove_interface(struct ieee80211_hw *hw, | |
| struct ieee80211_vif *vif) | |
| { | |
| struct b43legacy_wl *wl = hw_to_b43legacy_wl(hw); | |
| struct b43legacy_wldev *dev = wl->current_dev; | |
| unsigned long flags; | |
| b43legacydbg(wl, "Removing Interface type %d\n", vif->type); | |
| mutex_lock(&wl->mutex); | |
| B43legacy_WARN_ON(!wl->operating); | |
| B43legacy_WARN_ON(wl->vif != vif); | |
| wl->vif = NULL; | |
| wl->operating = false; | |
| spin_lock_irqsave(&wl->irq_lock, flags); | |
| b43legacy_adjust_opmode(dev); | |
| eth_zero_addr(wl->mac_addr); | |
| b43legacy_upload_card_macaddress(dev); | |
| spin_unlock_irqrestore(&wl->irq_lock, flags); | |
| mutex_unlock(&wl->mutex); | |
| } | |
| static int b43legacy_op_start(struct ieee80211_hw *hw) | |
| { | |
| struct b43legacy_wl *wl = hw_to_b43legacy_wl(hw); | |
| struct b43legacy_wldev *dev = wl->current_dev; | |
| int did_init = 0; | |
| int err = 0; | |
| /* Kill all old instance specific information to make sure | |
| * the card won't use it in the short timeframe between start | |
| * and mac80211 reconfiguring it. */ | |
| eth_zero_addr(wl->bssid); | |
| eth_zero_addr(wl->mac_addr); | |
| wl->filter_flags = 0; | |
| wl->beacon0_uploaded = false; | |
| wl->beacon1_uploaded = false; | |
| wl->beacon_templates_virgin = true; | |
| wl->radio_enabled = true; | |
| mutex_lock(&wl->mutex); | |
| if (b43legacy_status(dev) < B43legacy_STAT_INITIALIZED) { | |
| err = b43legacy_wireless_core_init(dev); | |
| if (err) | |
| goto out_mutex_unlock; | |
| did_init = 1; | |
| } | |
| if (b43legacy_status(dev) < B43legacy_STAT_STARTED) { | |
| err = b43legacy_wireless_core_start(dev); | |
| if (err) { | |
| if (did_init) | |
| b43legacy_wireless_core_exit(dev); | |
| goto out_mutex_unlock; | |
| } | |
| } | |
| wiphy_rfkill_start_polling(hw->wiphy); | |
| out_mutex_unlock: | |
| mutex_unlock(&wl->mutex); | |
| return err; | |
| } | |
| static void b43legacy_op_stop(struct ieee80211_hw *hw) | |
| { | |
| struct b43legacy_wl *wl = hw_to_b43legacy_wl(hw); | |
| struct b43legacy_wldev *dev = wl->current_dev; | |
| cancel_work_sync(&(wl->beacon_update_trigger)); | |
| mutex_lock(&wl->mutex); | |
| if (b43legacy_status(dev) >= B43legacy_STAT_STARTED) | |
| b43legacy_wireless_core_stop(dev); | |
| b43legacy_wireless_core_exit(dev); | |
| wl->radio_enabled = false; | |
| mutex_unlock(&wl->mutex); | |
| } | |
| static int b43legacy_op_beacon_set_tim(struct ieee80211_hw *hw, | |
| struct ieee80211_sta *sta, bool set) | |
| { | |
| struct b43legacy_wl *wl = hw_to_b43legacy_wl(hw); | |
| unsigned long flags; | |
| spin_lock_irqsave(&wl->irq_lock, flags); | |
| b43legacy_update_templates(wl); | |
| spin_unlock_irqrestore(&wl->irq_lock, flags); | |
| return 0; | |
| } | |
| static int b43legacy_op_get_survey(struct ieee80211_hw *hw, int idx, | |
| struct survey_info *survey) | |
| { | |
| struct b43legacy_wl *wl = hw_to_b43legacy_wl(hw); | |
| struct b43legacy_wldev *dev = wl->current_dev; | |
| struct ieee80211_conf *conf = &hw->conf; | |
| if (idx != 0) | |
| return -ENOENT; | |
| survey->channel = conf->chandef.chan; | |
| survey->filled = SURVEY_INFO_NOISE_DBM; | |
| survey->noise = dev->stats.link_noise; | |
| return 0; | |
| } | |
| static const struct ieee80211_ops b43legacy_hw_ops = { | |
| .tx = b43legacy_op_tx, | |
| .conf_tx = b43legacy_op_conf_tx, | |
| .add_interface = b43legacy_op_add_interface, | |
| .remove_interface = b43legacy_op_remove_interface, | |
| .config = b43legacy_op_dev_config, | |
| .bss_info_changed = b43legacy_op_bss_info_changed, | |
| .configure_filter = b43legacy_op_configure_filter, | |
| .get_stats = b43legacy_op_get_stats, | |
| .start = b43legacy_op_start, | |
| .stop = b43legacy_op_stop, | |
| .set_tim = b43legacy_op_beacon_set_tim, | |
| .get_survey = b43legacy_op_get_survey, | |
| .rfkill_poll = b43legacy_rfkill_poll, | |
| }; | |
| /* Hard-reset the chip. Do not call this directly. | |
| * Use b43legacy_controller_restart() | |
| */ | |
| static void b43legacy_chip_reset(struct work_struct *work) | |
| { | |
| struct b43legacy_wldev *dev = | |
| container_of(work, struct b43legacy_wldev, restart_work); | |
| struct b43legacy_wl *wl = dev->wl; | |
| int err = 0; | |
| int prev_status; | |
| mutex_lock(&wl->mutex); | |
| prev_status = b43legacy_status(dev); | |
| /* Bring the device down... */ | |
| if (prev_status >= B43legacy_STAT_STARTED) | |
| b43legacy_wireless_core_stop(dev); | |
| if (prev_status >= B43legacy_STAT_INITIALIZED) | |
| b43legacy_wireless_core_exit(dev); | |
| /* ...and up again. */ | |
| if (prev_status >= B43legacy_STAT_INITIALIZED) { | |
| err = b43legacy_wireless_core_init(dev); | |
| if (err) | |
| goto out; | |
| } | |
| if (prev_status >= B43legacy_STAT_STARTED) { | |
| err = b43legacy_wireless_core_start(dev); | |
| if (err) { | |
| b43legacy_wireless_core_exit(dev); | |
| goto out; | |
| } | |
| } | |
| out: | |
| if (err) | |
| wl->current_dev = NULL; /* Failed to init the dev. */ | |
| mutex_unlock(&wl->mutex); | |
| if (err) | |
| b43legacyerr(wl, "Controller restart FAILED\n"); | |
| else | |
| b43legacyinfo(wl, "Controller restarted\n"); | |
| } | |
| static int b43legacy_setup_modes(struct b43legacy_wldev *dev, | |
| int have_bphy, | |
| int have_gphy) | |
| { | |
| struct ieee80211_hw *hw = dev->wl->hw; | |
| struct b43legacy_phy *phy = &dev->phy; | |
| phy->possible_phymodes = 0; | |
| if (have_bphy) { | |
| hw->wiphy->bands[IEEE80211_BAND_2GHZ] = | |
| &b43legacy_band_2GHz_BPHY; | |
| phy->possible_phymodes |= B43legacy_PHYMODE_B; | |
| } | |
| if (have_gphy) { | |
| hw->wiphy->bands[IEEE80211_BAND_2GHZ] = | |
| &b43legacy_band_2GHz_GPHY; | |
| phy->possible_phymodes |= B43legacy_PHYMODE_G; | |
| } | |
| return 0; | |
| } | |
| static void b43legacy_wireless_core_detach(struct b43legacy_wldev *dev) | |
| { | |
| /* We release firmware that late to not be required to re-request | |
| * is all the time when we reinit the core. */ | |
| b43legacy_release_firmware(dev); | |
| } | |
| static int b43legacy_wireless_core_attach(struct b43legacy_wldev *dev) | |
| { | |
| struct b43legacy_wl *wl = dev->wl; | |
| struct ssb_bus *bus = dev->dev->bus; | |
| struct pci_dev *pdev = (bus->bustype == SSB_BUSTYPE_PCI) ? bus->host_pci : NULL; | |
| int err; | |
| int have_bphy = 0; | |
| int have_gphy = 0; | |
| u32 tmp; | |
| /* Do NOT do any device initialization here. | |
| * Do it in wireless_core_init() instead. | |
| * This function is for gathering basic information about the HW, only. | |
| * Also some structs may be set up here. But most likely you want to | |
| * have that in core_init(), too. | |
| */ | |
| err = ssb_bus_powerup(bus, 0); | |
| if (err) { | |
| b43legacyerr(wl, "Bus powerup failed\n"); | |
| goto out; | |
| } | |
| /* Get the PHY type. */ | |
| if (dev->dev->id.revision >= 5) { | |
| u32 tmshigh; | |
| tmshigh = ssb_read32(dev->dev, SSB_TMSHIGH); | |
| have_gphy = !!(tmshigh & B43legacy_TMSHIGH_GPHY); | |
| if (!have_gphy) | |
| have_bphy = 1; | |
| } else if (dev->dev->id.revision == 4) | |
| have_gphy = 1; | |
| else | |
| have_bphy = 1; | |
| dev->phy.gmode = (have_gphy || have_bphy); | |
| dev->phy.radio_on = true; | |
| tmp = dev->phy.gmode ? B43legacy_TMSLOW_GMODE : 0; | |
| b43legacy_wireless_core_reset(dev, tmp); | |
| err = b43legacy_phy_versioning(dev); | |
| if (err) | |
| goto err_powerdown; | |
| /* Check if this device supports multiband. */ | |
| if (!pdev || | |
| (pdev->device != 0x4312 && | |
| pdev->device != 0x4319 && | |
| pdev->device != 0x4324)) { | |
| /* No multiband support. */ | |
| have_bphy = 0; | |
| have_gphy = 0; | |
| switch (dev->phy.type) { | |
| case B43legacy_PHYTYPE_B: | |
| have_bphy = 1; | |
| break; | |
| case B43legacy_PHYTYPE_G: | |
| have_gphy = 1; | |
| break; | |
| default: | |
| B43legacy_BUG_ON(1); | |
| } | |
| } | |
| dev->phy.gmode = (have_gphy || have_bphy); | |
| tmp = dev->phy.gmode ? B43legacy_TMSLOW_GMODE : 0; | |
| b43legacy_wireless_core_reset(dev, tmp); | |
| err = b43legacy_validate_chipaccess(dev); | |
| if (err) | |
| goto err_powerdown; | |
| err = b43legacy_setup_modes(dev, have_bphy, have_gphy); | |
| if (err) | |
| goto err_powerdown; | |
| /* Now set some default "current_dev" */ | |
| if (!wl->current_dev) | |
| wl->current_dev = dev; | |
| INIT_WORK(&dev->restart_work, b43legacy_chip_reset); | |
| b43legacy_radio_turn_off(dev, 1); | |
| b43legacy_switch_analog(dev, 0); | |
| ssb_device_disable(dev->dev, 0); | |
| ssb_bus_may_powerdown(bus); | |
| out: | |
| return err; | |
| err_powerdown: | |
| ssb_bus_may_powerdown(bus); | |
| return err; | |
| } | |
| static void b43legacy_one_core_detach(struct ssb_device *dev) | |
| { | |
| struct b43legacy_wldev *wldev; | |
| struct b43legacy_wl *wl; | |
| /* Do not cancel ieee80211-workqueue based work here. | |
| * See comment in b43legacy_remove(). */ | |
| wldev = ssb_get_drvdata(dev); | |
| wl = wldev->wl; | |
| b43legacy_debugfs_remove_device(wldev); | |
| b43legacy_wireless_core_detach(wldev); | |
| list_del(&wldev->list); | |
| wl->nr_devs--; | |
| ssb_set_drvdata(dev, NULL); | |
| kfree(wldev); | |
| } | |
| static int b43legacy_one_core_attach(struct ssb_device *dev, | |
| struct b43legacy_wl *wl) | |
| { | |
| struct b43legacy_wldev *wldev; | |
| int err = -ENOMEM; | |
| wldev = kzalloc(sizeof(*wldev), GFP_KERNEL); | |
| if (!wldev) | |
| goto out; | |
| wldev->dev = dev; | |
| wldev->wl = wl; | |
| b43legacy_set_status(wldev, B43legacy_STAT_UNINIT); | |
| wldev->bad_frames_preempt = modparam_bad_frames_preempt; | |
| tasklet_init(&wldev->isr_tasklet, | |
| (void (*)(unsigned long))b43legacy_interrupt_tasklet, | |
| (unsigned long)wldev); | |
| if (modparam_pio) | |
| wldev->__using_pio = true; | |
| INIT_LIST_HEAD(&wldev->list); | |
| err = b43legacy_wireless_core_attach(wldev); | |
| if (err) | |
| goto err_kfree_wldev; | |
| list_add(&wldev->list, &wl->devlist); | |
| wl->nr_devs++; | |
| ssb_set_drvdata(dev, wldev); | |
| b43legacy_debugfs_add_device(wldev); | |
| out: | |
| return err; | |
| err_kfree_wldev: | |
| kfree(wldev); | |
| return err; | |
| } | |
| static void b43legacy_sprom_fixup(struct ssb_bus *bus) | |
| { | |
| /* boardflags workarounds */ | |
| if (bus->boardinfo.vendor == PCI_VENDOR_ID_APPLE && | |
| bus->boardinfo.type == 0x4E && | |
| bus->sprom.board_rev > 0x40) | |
| bus->sprom.boardflags_lo |= B43legacy_BFL_PACTRL; | |
| } | |
| static void b43legacy_wireless_exit(struct ssb_device *dev, | |
| struct b43legacy_wl *wl) | |
| { | |
| struct ieee80211_hw *hw = wl->hw; | |
| ssb_set_devtypedata(dev, NULL); | |
| ieee80211_free_hw(hw); | |
| } | |
| static int b43legacy_wireless_init(struct ssb_device *dev) | |
| { | |
| struct ssb_sprom *sprom = &dev->bus->sprom; | |
| struct ieee80211_hw *hw; | |
| struct b43legacy_wl *wl; | |
| int err = -ENOMEM; | |
| int queue_num; | |
| b43legacy_sprom_fixup(dev->bus); | |
| hw = ieee80211_alloc_hw(sizeof(*wl), &b43legacy_hw_ops); | |
| if (!hw) { | |
| b43legacyerr(NULL, "Could not allocate ieee80211 device\n"); | |
| goto out; | |
| } | |
| /* fill hw info */ | |
| ieee80211_hw_set(hw, RX_INCLUDES_FCS); | |
| ieee80211_hw_set(hw, SIGNAL_DBM); | |
| hw->wiphy->interface_modes = | |
| BIT(NL80211_IFTYPE_AP) | | |
| BIT(NL80211_IFTYPE_STATION) | | |
| BIT(NL80211_IFTYPE_WDS) | | |
| BIT(NL80211_IFTYPE_ADHOC); | |
| hw->queues = 1; /* FIXME: hardware has more queues */ | |
| hw->max_rates = 2; | |
| SET_IEEE80211_DEV(hw, dev->dev); | |
| if (is_valid_ether_addr(sprom->et1mac)) | |
| SET_IEEE80211_PERM_ADDR(hw, sprom->et1mac); | |
| else | |
| SET_IEEE80211_PERM_ADDR(hw, sprom->il0mac); | |
| /* Get and initialize struct b43legacy_wl */ | |
| wl = hw_to_b43legacy_wl(hw); | |
| memset(wl, 0, sizeof(*wl)); | |
| wl->hw = hw; | |
| spin_lock_init(&wl->irq_lock); | |
| spin_lock_init(&wl->leds_lock); | |
| mutex_init(&wl->mutex); | |
| INIT_LIST_HEAD(&wl->devlist); | |
| INIT_WORK(&wl->beacon_update_trigger, b43legacy_beacon_update_trigger_work); | |
| INIT_WORK(&wl->tx_work, b43legacy_tx_work); | |
| /* Initialize queues and flags. */ | |
| for (queue_num = 0; queue_num < B43legacy_QOS_QUEUE_NUM; queue_num++) { | |
| skb_queue_head_init(&wl->tx_queue[queue_num]); | |
| wl->tx_queue_stopped[queue_num] = 0; | |
| } | |
| ssb_set_devtypedata(dev, wl); | |
| b43legacyinfo(wl, "Broadcom %04X WLAN found (core revision %u)\n", | |
| dev->bus->chip_id, dev->id.revision); | |
| err = 0; | |
| out: | |
| return err; | |
| } | |
| static int b43legacy_probe(struct ssb_device *dev, | |
| const struct ssb_device_id *id) | |
| { | |
| struct b43legacy_wl *wl; | |
| int err; | |
| int first = 0; | |
| wl = ssb_get_devtypedata(dev); | |
| if (!wl) { | |
| /* Probing the first core - setup common struct b43legacy_wl */ | |
| first = 1; | |
| err = b43legacy_wireless_init(dev); | |
| if (err) | |
| goto out; | |
| wl = ssb_get_devtypedata(dev); | |
| B43legacy_WARN_ON(!wl); | |
| } | |
| err = b43legacy_one_core_attach(dev, wl); | |
| if (err) | |
| goto err_wireless_exit; | |
| /* setup and start work to load firmware */ | |
| INIT_WORK(&wl->firmware_load, b43legacy_request_firmware); | |
| schedule_work(&wl->firmware_load); | |
| out: | |
| return err; | |
| err_wireless_exit: | |
| if (first) | |
| b43legacy_wireless_exit(dev, wl); | |
| return err; | |
| } | |
| static void b43legacy_remove(struct ssb_device *dev) | |
| { | |
| struct b43legacy_wl *wl = ssb_get_devtypedata(dev); | |
| struct b43legacy_wldev *wldev = ssb_get_drvdata(dev); | |
| /* We must cancel any work here before unregistering from ieee80211, | |
| * as the ieee80211 unreg will destroy the workqueue. */ | |
| cancel_work_sync(&wldev->restart_work); | |
| cancel_work_sync(&wl->firmware_load); | |
| complete(&wldev->fw_load_complete); | |
| B43legacy_WARN_ON(!wl); | |
| if (!wldev->fw.ucode) | |
| return; /* NULL if fw never loaded */ | |
| if (wl->current_dev == wldev) | |
| ieee80211_unregister_hw(wl->hw); | |
| b43legacy_one_core_detach(dev); | |
| if (list_empty(&wl->devlist)) | |
| /* Last core on the chip unregistered. | |
| * We can destroy common struct b43legacy_wl. | |
| */ | |
| b43legacy_wireless_exit(dev, wl); | |
| } | |
| /* Perform a hardware reset. This can be called from any context. */ | |
| void b43legacy_controller_restart(struct b43legacy_wldev *dev, | |
| const char *reason) | |
| { | |
| /* Must avoid requeueing, if we are in shutdown. */ | |
| if (b43legacy_status(dev) < B43legacy_STAT_INITIALIZED) | |
| return; | |
| b43legacyinfo(dev->wl, "Controller RESET (%s) ...\n", reason); | |
| ieee80211_queue_work(dev->wl->hw, &dev->restart_work); | |
| } | |
| #ifdef CONFIG_PM | |
| static int b43legacy_suspend(struct ssb_device *dev, pm_message_t state) | |
| { | |
| struct b43legacy_wldev *wldev = ssb_get_drvdata(dev); | |
| struct b43legacy_wl *wl = wldev->wl; | |
| b43legacydbg(wl, "Suspending...\n"); | |
| mutex_lock(&wl->mutex); | |
| wldev->suspend_init_status = b43legacy_status(wldev); | |
| if (wldev->suspend_init_status >= B43legacy_STAT_STARTED) | |
| b43legacy_wireless_core_stop(wldev); | |
| if (wldev->suspend_init_status >= B43legacy_STAT_INITIALIZED) | |
| b43legacy_wireless_core_exit(wldev); | |
| mutex_unlock(&wl->mutex); | |
| b43legacydbg(wl, "Device suspended.\n"); | |
| return 0; | |
| } | |
| static int b43legacy_resume(struct ssb_device *dev) | |
| { | |
| struct b43legacy_wldev *wldev = ssb_get_drvdata(dev); | |
| struct b43legacy_wl *wl = wldev->wl; | |
| int err = 0; | |
| b43legacydbg(wl, "Resuming...\n"); | |
| mutex_lock(&wl->mutex); | |
| if (wldev->suspend_init_status >= B43legacy_STAT_INITIALIZED) { | |
| err = b43legacy_wireless_core_init(wldev); | |
| if (err) { | |
| b43legacyerr(wl, "Resume failed at core init\n"); | |
| goto out; | |
| } | |
| } | |
| if (wldev->suspend_init_status >= B43legacy_STAT_STARTED) { | |
| err = b43legacy_wireless_core_start(wldev); | |
| if (err) { | |
| b43legacy_wireless_core_exit(wldev); | |
| b43legacyerr(wl, "Resume failed at core start\n"); | |
| goto out; | |
| } | |
| } | |
| b43legacydbg(wl, "Device resumed.\n"); | |
| out: | |
| mutex_unlock(&wl->mutex); | |
| return err; | |
| } | |
| #else /* CONFIG_PM */ | |
| # define b43legacy_suspend NULL | |
| # define b43legacy_resume NULL | |
| #endif /* CONFIG_PM */ | |
| static struct ssb_driver b43legacy_ssb_driver = { | |
| .name = KBUILD_MODNAME, | |
| .id_table = b43legacy_ssb_tbl, | |
| .probe = b43legacy_probe, | |
| .remove = b43legacy_remove, | |
| .suspend = b43legacy_suspend, | |
| .resume = b43legacy_resume, | |
| }; | |
| static void b43legacy_print_driverinfo(void) | |
| { | |
| const char *feat_pci = "", *feat_leds = "", | |
| *feat_pio = "", *feat_dma = ""; | |
| #ifdef CONFIG_B43LEGACY_PCI_AUTOSELECT | |
| feat_pci = "P"; | |
| #endif | |
| #ifdef CONFIG_B43LEGACY_LEDS | |
| feat_leds = "L"; | |
| #endif | |
| #ifdef CONFIG_B43LEGACY_PIO | |
| feat_pio = "I"; | |
| #endif | |
| #ifdef CONFIG_B43LEGACY_DMA | |
| feat_dma = "D"; | |
| #endif | |
| printk(KERN_INFO "Broadcom 43xx-legacy driver loaded " | |
| "[ Features: %s%s%s%s ]\n", | |
| feat_pci, feat_leds, feat_pio, feat_dma); | |
| } | |
| static int __init b43legacy_init(void) | |
| { | |
| int err; | |
| b43legacy_debugfs_init(); | |
| err = ssb_driver_register(&b43legacy_ssb_driver); | |
| if (err) | |
| goto err_dfs_exit; | |
| b43legacy_print_driverinfo(); | |
| return err; | |
| err_dfs_exit: | |
| b43legacy_debugfs_exit(); | |
| return err; | |
| } | |
| static void __exit b43legacy_exit(void) | |
| { | |
| ssb_driver_unregister(&b43legacy_ssb_driver); | |
| b43legacy_debugfs_exit(); | |
| } | |
| module_init(b43legacy_init) | |
| module_exit(b43legacy_exit) |