| /* | |
| * Copyright (c) 2011 Broadcom Corporation | |
| * | |
| * Permission to use, copy, modify, and/or distribute this software for any | |
| * purpose with or without fee is hereby granted, provided that the above | |
| * copyright notice and this permission notice appear in all copies. | |
| * | |
| * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES | |
| * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF | |
| * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY | |
| * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES | |
| * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION | |
| * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN | |
| * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. | |
| */ | |
| #include <linux/kernel.h> | |
| #include <linux/module.h> | |
| #include <linux/firmware.h> | |
| #include <linux/usb.h> | |
| #include <linux/vmalloc.h> | |
| #include <brcmu_utils.h> | |
| #include <brcm_hw_ids.h> | |
| #include <brcmu_wifi.h> | |
| #include "bus.h" | |
| #include "debug.h" | |
| #include "firmware.h" | |
| #include "usb.h" | |
| #define IOCTL_RESP_TIMEOUT 2000 | |
| #define BRCMF_USB_RESET_GETVER_SPINWAIT 100 /* in unit of ms */ | |
| #define BRCMF_USB_RESET_GETVER_LOOP_CNT 10 | |
| #define BRCMF_POSTBOOT_ID 0xA123 /* ID to detect if dongle | |
| has boot up */ | |
| #define BRCMF_USB_NRXQ 50 | |
| #define BRCMF_USB_NTXQ 50 | |
| #define BRCMF_USB_CBCTL_WRITE 0 | |
| #define BRCMF_USB_CBCTL_READ 1 | |
| #define BRCMF_USB_MAX_PKT_SIZE 1600 | |
| #define BRCMF_USB_43143_FW_NAME "brcm/brcmfmac43143.bin" | |
| #define BRCMF_USB_43236_FW_NAME "brcm/brcmfmac43236b.bin" | |
| #define BRCMF_USB_43242_FW_NAME "brcm/brcmfmac43242a.bin" | |
| #define BRCMF_USB_43569_FW_NAME "brcm/brcmfmac43569.bin" | |
| #define TRX_MAGIC 0x30524448 /* "HDR0" */ | |
| #define TRX_MAX_OFFSET 3 /* Max number of file offsets */ | |
| #define TRX_UNCOMP_IMAGE 0x20 /* Trx holds uncompressed img */ | |
| #define TRX_RDL_CHUNK 1500 /* size of each dl transfer */ | |
| #define TRX_OFFSETS_DLFWLEN_IDX 0 | |
| /* Control messages: bRequest values */ | |
| #define DL_GETSTATE 0 /* returns the rdl_state_t struct */ | |
| #define DL_CHECK_CRC 1 /* currently unused */ | |
| #define DL_GO 2 /* execute downloaded image */ | |
| #define DL_START 3 /* initialize dl state */ | |
| #define DL_REBOOT 4 /* reboot the device in 2 seconds */ | |
| #define DL_GETVER 5 /* returns the bootrom_id_t struct */ | |
| #define DL_GO_PROTECTED 6 /* execute the downloaded code and set reset | |
| * event to occur in 2 seconds. It is the | |
| * responsibility of the downloaded code to | |
| * clear this event | |
| */ | |
| #define DL_EXEC 7 /* jump to a supplied address */ | |
| #define DL_RESETCFG 8 /* To support single enum on dongle | |
| * - Not used by bootloader | |
| */ | |
| #define DL_DEFER_RESP_OK 9 /* Potentially defer the response to setup | |
| * if resp unavailable | |
| */ | |
| /* states */ | |
| #define DL_WAITING 0 /* waiting to rx first pkt */ | |
| #define DL_READY 1 /* hdr was good, waiting for more of the | |
| * compressed image | |
| */ | |
| #define DL_BAD_HDR 2 /* hdr was corrupted */ | |
| #define DL_BAD_CRC 3 /* compressed image was corrupted */ | |
| #define DL_RUNNABLE 4 /* download was successful,waiting for go cmd */ | |
| #define DL_START_FAIL 5 /* failed to initialize correctly */ | |
| #define DL_NVRAM_TOOBIG 6 /* host specified nvram data exceeds DL_NVRAM | |
| * value | |
| */ | |
| #define DL_IMAGE_TOOBIG 7 /* firmware image too big */ | |
| struct trx_header_le { | |
| __le32 magic; /* "HDR0" */ | |
| __le32 len; /* Length of file including header */ | |
| __le32 crc32; /* CRC from flag_version to end of file */ | |
| __le32 flag_version; /* 0:15 flags, 16:31 version */ | |
| __le32 offsets[TRX_MAX_OFFSET]; /* Offsets of partitions from start of | |
| * header | |
| */ | |
| }; | |
| struct rdl_state_le { | |
| __le32 state; | |
| __le32 bytes; | |
| }; | |
| struct bootrom_id_le { | |
| __le32 chip; /* Chip id */ | |
| __le32 chiprev; /* Chip rev */ | |
| __le32 ramsize; /* Size of RAM */ | |
| __le32 remapbase; /* Current remap base address */ | |
| __le32 boardtype; /* Type of board */ | |
| __le32 boardrev; /* Board revision */ | |
| }; | |
| struct brcmf_usb_image { | |
| struct list_head list; | |
| s8 *fwname; | |
| u8 *image; | |
| int image_len; | |
| }; | |
| struct brcmf_usbdev_info { | |
| struct brcmf_usbdev bus_pub; /* MUST BE FIRST */ | |
| spinlock_t qlock; | |
| struct list_head rx_freeq; | |
| struct list_head rx_postq; | |
| struct list_head tx_freeq; | |
| struct list_head tx_postq; | |
| uint rx_pipe, tx_pipe; | |
| int rx_low_watermark; | |
| int tx_low_watermark; | |
| int tx_high_watermark; | |
| int tx_freecount; | |
| bool tx_flowblock; | |
| spinlock_t tx_flowblock_lock; | |
| struct brcmf_usbreq *tx_reqs; | |
| struct brcmf_usbreq *rx_reqs; | |
| const u8 *image; /* buffer for combine fw and nvram */ | |
| int image_len; | |
| struct usb_device *usbdev; | |
| struct device *dev; | |
| struct mutex dev_init_lock; | |
| int ctl_in_pipe, ctl_out_pipe; | |
| struct urb *ctl_urb; /* URB for control endpoint */ | |
| struct usb_ctrlrequest ctl_write; | |
| struct usb_ctrlrequest ctl_read; | |
| u32 ctl_urb_actual_length; | |
| int ctl_urb_status; | |
| int ctl_completed; | |
| wait_queue_head_t ioctl_resp_wait; | |
| ulong ctl_op; | |
| u8 ifnum; | |
| struct urb *bulk_urb; /* used for FW download */ | |
| bool wowl_enabled; | |
| }; | |
| static void brcmf_usb_rx_refill(struct brcmf_usbdev_info *devinfo, | |
| struct brcmf_usbreq *req); | |
| static struct brcmf_usbdev *brcmf_usb_get_buspub(struct device *dev) | |
| { | |
| struct brcmf_bus *bus_if = dev_get_drvdata(dev); | |
| return bus_if->bus_priv.usb; | |
| } | |
| static struct brcmf_usbdev_info *brcmf_usb_get_businfo(struct device *dev) | |
| { | |
| return brcmf_usb_get_buspub(dev)->devinfo; | |
| } | |
| static int brcmf_usb_ioctl_resp_wait(struct brcmf_usbdev_info *devinfo) | |
| { | |
| return wait_event_timeout(devinfo->ioctl_resp_wait, | |
| devinfo->ctl_completed, | |
| msecs_to_jiffies(IOCTL_RESP_TIMEOUT)); | |
| } | |
| static void brcmf_usb_ioctl_resp_wake(struct brcmf_usbdev_info *devinfo) | |
| { | |
| if (waitqueue_active(&devinfo->ioctl_resp_wait)) | |
| wake_up(&devinfo->ioctl_resp_wait); | |
| } | |
| static void | |
| brcmf_usb_ctl_complete(struct brcmf_usbdev_info *devinfo, int type, int status) | |
| { | |
| brcmf_dbg(USB, "Enter, status=%d\n", status); | |
| if (unlikely(devinfo == NULL)) | |
| return; | |
| if (type == BRCMF_USB_CBCTL_READ) { | |
| if (status == 0) | |
| devinfo->bus_pub.stats.rx_ctlpkts++; | |
| else | |
| devinfo->bus_pub.stats.rx_ctlerrs++; | |
| } else if (type == BRCMF_USB_CBCTL_WRITE) { | |
| if (status == 0) | |
| devinfo->bus_pub.stats.tx_ctlpkts++; | |
| else | |
| devinfo->bus_pub.stats.tx_ctlerrs++; | |
| } | |
| devinfo->ctl_urb_status = status; | |
| devinfo->ctl_completed = true; | |
| brcmf_usb_ioctl_resp_wake(devinfo); | |
| } | |
| static void | |
| brcmf_usb_ctlread_complete(struct urb *urb) | |
| { | |
| struct brcmf_usbdev_info *devinfo = | |
| (struct brcmf_usbdev_info *)urb->context; | |
| brcmf_dbg(USB, "Enter\n"); | |
| devinfo->ctl_urb_actual_length = urb->actual_length; | |
| brcmf_usb_ctl_complete(devinfo, BRCMF_USB_CBCTL_READ, | |
| urb->status); | |
| } | |
| static void | |
| brcmf_usb_ctlwrite_complete(struct urb *urb) | |
| { | |
| struct brcmf_usbdev_info *devinfo = | |
| (struct brcmf_usbdev_info *)urb->context; | |
| brcmf_dbg(USB, "Enter\n"); | |
| brcmf_usb_ctl_complete(devinfo, BRCMF_USB_CBCTL_WRITE, | |
| urb->status); | |
| } | |
| static int | |
| brcmf_usb_send_ctl(struct brcmf_usbdev_info *devinfo, u8 *buf, int len) | |
| { | |
| int ret; | |
| u16 size; | |
| brcmf_dbg(USB, "Enter\n"); | |
| if (devinfo == NULL || buf == NULL || | |
| len == 0 || devinfo->ctl_urb == NULL) | |
| return -EINVAL; | |
| size = len; | |
| devinfo->ctl_write.wLength = cpu_to_le16p(&size); | |
| devinfo->ctl_urb->transfer_buffer_length = size; | |
| devinfo->ctl_urb_status = 0; | |
| devinfo->ctl_urb_actual_length = 0; | |
| usb_fill_control_urb(devinfo->ctl_urb, | |
| devinfo->usbdev, | |
| devinfo->ctl_out_pipe, | |
| (unsigned char *) &devinfo->ctl_write, | |
| buf, size, | |
| (usb_complete_t)brcmf_usb_ctlwrite_complete, | |
| devinfo); | |
| ret = usb_submit_urb(devinfo->ctl_urb, GFP_ATOMIC); | |
| if (ret < 0) | |
| brcmf_err("usb_submit_urb failed %d\n", ret); | |
| return ret; | |
| } | |
| static int | |
| brcmf_usb_recv_ctl(struct brcmf_usbdev_info *devinfo, u8 *buf, int len) | |
| { | |
| int ret; | |
| u16 size; | |
| brcmf_dbg(USB, "Enter\n"); | |
| if ((devinfo == NULL) || (buf == NULL) || (len == 0) | |
| || (devinfo->ctl_urb == NULL)) | |
| return -EINVAL; | |
| size = len; | |
| devinfo->ctl_read.wLength = cpu_to_le16p(&size); | |
| devinfo->ctl_urb->transfer_buffer_length = size; | |
| devinfo->ctl_read.bRequestType = USB_DIR_IN | |
| | USB_TYPE_CLASS | USB_RECIP_INTERFACE; | |
| devinfo->ctl_read.bRequest = 1; | |
| usb_fill_control_urb(devinfo->ctl_urb, | |
| devinfo->usbdev, | |
| devinfo->ctl_in_pipe, | |
| (unsigned char *) &devinfo->ctl_read, | |
| buf, size, | |
| (usb_complete_t)brcmf_usb_ctlread_complete, | |
| devinfo); | |
| ret = usb_submit_urb(devinfo->ctl_urb, GFP_ATOMIC); | |
| if (ret < 0) | |
| brcmf_err("usb_submit_urb failed %d\n", ret); | |
| return ret; | |
| } | |
| static int brcmf_usb_tx_ctlpkt(struct device *dev, u8 *buf, u32 len) | |
| { | |
| int err = 0; | |
| int timeout = 0; | |
| struct brcmf_usbdev_info *devinfo = brcmf_usb_get_businfo(dev); | |
| brcmf_dbg(USB, "Enter\n"); | |
| if (devinfo->bus_pub.state != BRCMFMAC_USB_STATE_UP) | |
| return -EIO; | |
| if (test_and_set_bit(0, &devinfo->ctl_op)) | |
| return -EIO; | |
| devinfo->ctl_completed = false; | |
| err = brcmf_usb_send_ctl(devinfo, buf, len); | |
| if (err) { | |
| brcmf_err("fail %d bytes: %d\n", err, len); | |
| clear_bit(0, &devinfo->ctl_op); | |
| return err; | |
| } | |
| timeout = brcmf_usb_ioctl_resp_wait(devinfo); | |
| clear_bit(0, &devinfo->ctl_op); | |
| if (!timeout) { | |
| brcmf_err("Txctl wait timed out\n"); | |
| err = -EIO; | |
| } | |
| return err; | |
| } | |
| static int brcmf_usb_rx_ctlpkt(struct device *dev, u8 *buf, u32 len) | |
| { | |
| int err = 0; | |
| int timeout = 0; | |
| struct brcmf_usbdev_info *devinfo = brcmf_usb_get_businfo(dev); | |
| brcmf_dbg(USB, "Enter\n"); | |
| if (devinfo->bus_pub.state != BRCMFMAC_USB_STATE_UP) | |
| return -EIO; | |
| if (test_and_set_bit(0, &devinfo->ctl_op)) | |
| return -EIO; | |
| devinfo->ctl_completed = false; | |
| err = brcmf_usb_recv_ctl(devinfo, buf, len); | |
| if (err) { | |
| brcmf_err("fail %d bytes: %d\n", err, len); | |
| clear_bit(0, &devinfo->ctl_op); | |
| return err; | |
| } | |
| timeout = brcmf_usb_ioctl_resp_wait(devinfo); | |
| err = devinfo->ctl_urb_status; | |
| clear_bit(0, &devinfo->ctl_op); | |
| if (!timeout) { | |
| brcmf_err("rxctl wait timed out\n"); | |
| err = -EIO; | |
| } | |
| if (!err) | |
| return devinfo->ctl_urb_actual_length; | |
| else | |
| return err; | |
| } | |
| static struct brcmf_usbreq *brcmf_usb_deq(struct brcmf_usbdev_info *devinfo, | |
| struct list_head *q, int *counter) | |
| { | |
| unsigned long flags; | |
| struct brcmf_usbreq *req; | |
| spin_lock_irqsave(&devinfo->qlock, flags); | |
| if (list_empty(q)) { | |
| spin_unlock_irqrestore(&devinfo->qlock, flags); | |
| return NULL; | |
| } | |
| req = list_entry(q->next, struct brcmf_usbreq, list); | |
| list_del_init(q->next); | |
| if (counter) | |
| (*counter)--; | |
| spin_unlock_irqrestore(&devinfo->qlock, flags); | |
| return req; | |
| } | |
| static void brcmf_usb_enq(struct brcmf_usbdev_info *devinfo, | |
| struct list_head *q, struct brcmf_usbreq *req, | |
| int *counter) | |
| { | |
| unsigned long flags; | |
| spin_lock_irqsave(&devinfo->qlock, flags); | |
| list_add_tail(&req->list, q); | |
| if (counter) | |
| (*counter)++; | |
| spin_unlock_irqrestore(&devinfo->qlock, flags); | |
| } | |
| static struct brcmf_usbreq * | |
| brcmf_usbdev_qinit(struct list_head *q, int qsize) | |
| { | |
| int i; | |
| struct brcmf_usbreq *req, *reqs; | |
| reqs = kcalloc(qsize, sizeof(struct brcmf_usbreq), GFP_ATOMIC); | |
| if (reqs == NULL) | |
| return NULL; | |
| req = reqs; | |
| for (i = 0; i < qsize; i++) { | |
| req->urb = usb_alloc_urb(0, GFP_ATOMIC); | |
| if (!req->urb) | |
| goto fail; | |
| INIT_LIST_HEAD(&req->list); | |
| list_add_tail(&req->list, q); | |
| req++; | |
| } | |
| return reqs; | |
| fail: | |
| brcmf_err("fail!\n"); | |
| while (!list_empty(q)) { | |
| req = list_entry(q->next, struct brcmf_usbreq, list); | |
| if (req) | |
| usb_free_urb(req->urb); | |
| list_del(q->next); | |
| } | |
| return NULL; | |
| } | |
| static void brcmf_usb_free_q(struct list_head *q, bool pending) | |
| { | |
| struct brcmf_usbreq *req, *next; | |
| int i = 0; | |
| list_for_each_entry_safe(req, next, q, list) { | |
| if (!req->urb) { | |
| brcmf_err("bad req\n"); | |
| break; | |
| } | |
| i++; | |
| if (pending) { | |
| usb_kill_urb(req->urb); | |
| } else { | |
| usb_free_urb(req->urb); | |
| list_del_init(&req->list); | |
| } | |
| } | |
| } | |
| static void brcmf_usb_del_fromq(struct brcmf_usbdev_info *devinfo, | |
| struct brcmf_usbreq *req) | |
| { | |
| unsigned long flags; | |
| spin_lock_irqsave(&devinfo->qlock, flags); | |
| list_del_init(&req->list); | |
| spin_unlock_irqrestore(&devinfo->qlock, flags); | |
| } | |
| static void brcmf_usb_tx_complete(struct urb *urb) | |
| { | |
| struct brcmf_usbreq *req = (struct brcmf_usbreq *)urb->context; | |
| struct brcmf_usbdev_info *devinfo = req->devinfo; | |
| unsigned long flags; | |
| brcmf_dbg(USB, "Enter, urb->status=%d, skb=%p\n", urb->status, | |
| req->skb); | |
| brcmf_usb_del_fromq(devinfo, req); | |
| brcmf_txcomplete(devinfo->dev, req->skb, urb->status == 0); | |
| req->skb = NULL; | |
| brcmf_usb_enq(devinfo, &devinfo->tx_freeq, req, &devinfo->tx_freecount); | |
| spin_lock_irqsave(&devinfo->tx_flowblock_lock, flags); | |
| if (devinfo->tx_freecount > devinfo->tx_high_watermark && | |
| devinfo->tx_flowblock) { | |
| brcmf_txflowblock(devinfo->dev, false); | |
| devinfo->tx_flowblock = false; | |
| } | |
| spin_unlock_irqrestore(&devinfo->tx_flowblock_lock, flags); | |
| } | |
| static void brcmf_usb_rx_complete(struct urb *urb) | |
| { | |
| struct brcmf_usbreq *req = (struct brcmf_usbreq *)urb->context; | |
| struct brcmf_usbdev_info *devinfo = req->devinfo; | |
| struct sk_buff *skb; | |
| brcmf_dbg(USB, "Enter, urb->status=%d\n", urb->status); | |
| brcmf_usb_del_fromq(devinfo, req); | |
| skb = req->skb; | |
| req->skb = NULL; | |
| /* zero lenght packets indicate usb "failure". Do not refill */ | |
| if (urb->status != 0 || !urb->actual_length) { | |
| brcmu_pkt_buf_free_skb(skb); | |
| brcmf_usb_enq(devinfo, &devinfo->rx_freeq, req, NULL); | |
| return; | |
| } | |
| if (devinfo->bus_pub.state == BRCMFMAC_USB_STATE_UP) { | |
| skb_put(skb, urb->actual_length); | |
| brcmf_rx_frame(devinfo->dev, skb); | |
| brcmf_usb_rx_refill(devinfo, req); | |
| } else { | |
| brcmu_pkt_buf_free_skb(skb); | |
| brcmf_usb_enq(devinfo, &devinfo->rx_freeq, req, NULL); | |
| } | |
| return; | |
| } | |
| static void brcmf_usb_rx_refill(struct brcmf_usbdev_info *devinfo, | |
| struct brcmf_usbreq *req) | |
| { | |
| struct sk_buff *skb; | |
| int ret; | |
| if (!req || !devinfo) | |
| return; | |
| skb = dev_alloc_skb(devinfo->bus_pub.bus_mtu); | |
| if (!skb) { | |
| brcmf_usb_enq(devinfo, &devinfo->rx_freeq, req, NULL); | |
| return; | |
| } | |
| req->skb = skb; | |
| usb_fill_bulk_urb(req->urb, devinfo->usbdev, devinfo->rx_pipe, | |
| skb->data, skb_tailroom(skb), brcmf_usb_rx_complete, | |
| req); | |
| req->devinfo = devinfo; | |
| brcmf_usb_enq(devinfo, &devinfo->rx_postq, req, NULL); | |
| ret = usb_submit_urb(req->urb, GFP_ATOMIC); | |
| if (ret) { | |
| brcmf_usb_del_fromq(devinfo, req); | |
| brcmu_pkt_buf_free_skb(req->skb); | |
| req->skb = NULL; | |
| brcmf_usb_enq(devinfo, &devinfo->rx_freeq, req, NULL); | |
| } | |
| return; | |
| } | |
| static void brcmf_usb_rx_fill_all(struct brcmf_usbdev_info *devinfo) | |
| { | |
| struct brcmf_usbreq *req; | |
| if (devinfo->bus_pub.state != BRCMFMAC_USB_STATE_UP) { | |
| brcmf_err("bus is not up=%d\n", devinfo->bus_pub.state); | |
| return; | |
| } | |
| while ((req = brcmf_usb_deq(devinfo, &devinfo->rx_freeq, NULL)) != NULL) | |
| brcmf_usb_rx_refill(devinfo, req); | |
| } | |
| static void | |
| brcmf_usb_state_change(struct brcmf_usbdev_info *devinfo, int state) | |
| { | |
| struct brcmf_bus *bcmf_bus = devinfo->bus_pub.bus; | |
| int old_state; | |
| brcmf_dbg(USB, "Enter, current state=%d, new state=%d\n", | |
| devinfo->bus_pub.state, state); | |
| if (devinfo->bus_pub.state == state) | |
| return; | |
| old_state = devinfo->bus_pub.state; | |
| devinfo->bus_pub.state = state; | |
| /* update state of upper layer */ | |
| if (state == BRCMFMAC_USB_STATE_DOWN) { | |
| brcmf_dbg(USB, "DBUS is down\n"); | |
| brcmf_bus_change_state(bcmf_bus, BRCMF_BUS_DOWN); | |
| } else if (state == BRCMFMAC_USB_STATE_UP) { | |
| brcmf_dbg(USB, "DBUS is up\n"); | |
| brcmf_bus_change_state(bcmf_bus, BRCMF_BUS_UP); | |
| } else { | |
| brcmf_dbg(USB, "DBUS current state=%d\n", state); | |
| } | |
| } | |
| static int brcmf_usb_tx(struct device *dev, struct sk_buff *skb) | |
| { | |
| struct brcmf_usbdev_info *devinfo = brcmf_usb_get_businfo(dev); | |
| struct brcmf_usbreq *req; | |
| int ret; | |
| unsigned long flags; | |
| brcmf_dbg(USB, "Enter, skb=%p\n", skb); | |
| if (devinfo->bus_pub.state != BRCMFMAC_USB_STATE_UP) { | |
| ret = -EIO; | |
| goto fail; | |
| } | |
| req = brcmf_usb_deq(devinfo, &devinfo->tx_freeq, | |
| &devinfo->tx_freecount); | |
| if (!req) { | |
| brcmf_err("no req to send\n"); | |
| ret = -ENOMEM; | |
| goto fail; | |
| } | |
| req->skb = skb; | |
| req->devinfo = devinfo; | |
| usb_fill_bulk_urb(req->urb, devinfo->usbdev, devinfo->tx_pipe, | |
| skb->data, skb->len, brcmf_usb_tx_complete, req); | |
| req->urb->transfer_flags |= URB_ZERO_PACKET; | |
| brcmf_usb_enq(devinfo, &devinfo->tx_postq, req, NULL); | |
| ret = usb_submit_urb(req->urb, GFP_ATOMIC); | |
| if (ret) { | |
| brcmf_err("brcmf_usb_tx usb_submit_urb FAILED\n"); | |
| brcmf_usb_del_fromq(devinfo, req); | |
| req->skb = NULL; | |
| brcmf_usb_enq(devinfo, &devinfo->tx_freeq, req, | |
| &devinfo->tx_freecount); | |
| goto fail; | |
| } | |
| spin_lock_irqsave(&devinfo->tx_flowblock_lock, flags); | |
| if (devinfo->tx_freecount < devinfo->tx_low_watermark && | |
| !devinfo->tx_flowblock) { | |
| brcmf_txflowblock(dev, true); | |
| devinfo->tx_flowblock = true; | |
| } | |
| spin_unlock_irqrestore(&devinfo->tx_flowblock_lock, flags); | |
| return 0; | |
| fail: | |
| return ret; | |
| } | |
| static int brcmf_usb_up(struct device *dev) | |
| { | |
| struct brcmf_usbdev_info *devinfo = brcmf_usb_get_businfo(dev); | |
| brcmf_dbg(USB, "Enter\n"); | |
| if (devinfo->bus_pub.state == BRCMFMAC_USB_STATE_UP) | |
| return 0; | |
| /* Success, indicate devinfo is fully up */ | |
| brcmf_usb_state_change(devinfo, BRCMFMAC_USB_STATE_UP); | |
| if (devinfo->ctl_urb) { | |
| devinfo->ctl_in_pipe = usb_rcvctrlpipe(devinfo->usbdev, 0); | |
| devinfo->ctl_out_pipe = usb_sndctrlpipe(devinfo->usbdev, 0); | |
| /* CTL Write */ | |
| devinfo->ctl_write.bRequestType = | |
| USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE; | |
| devinfo->ctl_write.bRequest = 0; | |
| devinfo->ctl_write.wValue = cpu_to_le16(0); | |
| devinfo->ctl_write.wIndex = cpu_to_le16(devinfo->ifnum); | |
| /* CTL Read */ | |
| devinfo->ctl_read.bRequestType = | |
| USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE; | |
| devinfo->ctl_read.bRequest = 1; | |
| devinfo->ctl_read.wValue = cpu_to_le16(0); | |
| devinfo->ctl_read.wIndex = cpu_to_le16(devinfo->ifnum); | |
| } | |
| brcmf_usb_rx_fill_all(devinfo); | |
| return 0; | |
| } | |
| static void brcmf_cancel_all_urbs(struct brcmf_usbdev_info *devinfo) | |
| { | |
| if (devinfo->ctl_urb) | |
| usb_kill_urb(devinfo->ctl_urb); | |
| if (devinfo->bulk_urb) | |
| usb_kill_urb(devinfo->bulk_urb); | |
| brcmf_usb_free_q(&devinfo->tx_postq, true); | |
| brcmf_usb_free_q(&devinfo->rx_postq, true); | |
| } | |
| static void brcmf_usb_down(struct device *dev) | |
| { | |
| struct brcmf_usbdev_info *devinfo = brcmf_usb_get_businfo(dev); | |
| brcmf_dbg(USB, "Enter\n"); | |
| if (devinfo == NULL) | |
| return; | |
| if (devinfo->bus_pub.state == BRCMFMAC_USB_STATE_DOWN) | |
| return; | |
| brcmf_usb_state_change(devinfo, BRCMFMAC_USB_STATE_DOWN); | |
| brcmf_cancel_all_urbs(devinfo); | |
| } | |
| static void | |
| brcmf_usb_sync_complete(struct urb *urb) | |
| { | |
| struct brcmf_usbdev_info *devinfo = | |
| (struct brcmf_usbdev_info *)urb->context; | |
| devinfo->ctl_completed = true; | |
| brcmf_usb_ioctl_resp_wake(devinfo); | |
| } | |
| static int brcmf_usb_dl_cmd(struct brcmf_usbdev_info *devinfo, u8 cmd, | |
| void *buffer, int buflen) | |
| { | |
| int ret; | |
| char *tmpbuf; | |
| u16 size; | |
| if ((!devinfo) || (devinfo->ctl_urb == NULL)) | |
| return -EINVAL; | |
| tmpbuf = kmalloc(buflen, GFP_ATOMIC); | |
| if (!tmpbuf) | |
| return -ENOMEM; | |
| size = buflen; | |
| devinfo->ctl_urb->transfer_buffer_length = size; | |
| devinfo->ctl_read.wLength = cpu_to_le16p(&size); | |
| devinfo->ctl_read.bRequestType = USB_DIR_IN | USB_TYPE_VENDOR | | |
| USB_RECIP_INTERFACE; | |
| devinfo->ctl_read.bRequest = cmd; | |
| usb_fill_control_urb(devinfo->ctl_urb, | |
| devinfo->usbdev, | |
| usb_rcvctrlpipe(devinfo->usbdev, 0), | |
| (unsigned char *) &devinfo->ctl_read, | |
| (void *) tmpbuf, size, | |
| (usb_complete_t)brcmf_usb_sync_complete, devinfo); | |
| devinfo->ctl_completed = false; | |
| ret = usb_submit_urb(devinfo->ctl_urb, GFP_ATOMIC); | |
| if (ret < 0) { | |
| brcmf_err("usb_submit_urb failed %d\n", ret); | |
| goto finalize; | |
| } | |
| if (!brcmf_usb_ioctl_resp_wait(devinfo)) { | |
| usb_kill_urb(devinfo->ctl_urb); | |
| ret = -ETIMEDOUT; | |
| } else { | |
| memcpy(buffer, tmpbuf, buflen); | |
| } | |
| finalize: | |
| kfree(tmpbuf); | |
| return ret; | |
| } | |
| static bool | |
| brcmf_usb_dlneeded(struct brcmf_usbdev_info *devinfo) | |
| { | |
| struct bootrom_id_le id; | |
| u32 chipid, chiprev; | |
| brcmf_dbg(USB, "Enter\n"); | |
| if (devinfo == NULL) | |
| return false; | |
| /* Check if firmware downloaded already by querying runtime ID */ | |
| id.chip = cpu_to_le32(0xDEAD); | |
| brcmf_usb_dl_cmd(devinfo, DL_GETVER, &id, sizeof(id)); | |
| chipid = le32_to_cpu(id.chip); | |
| chiprev = le32_to_cpu(id.chiprev); | |
| if ((chipid & 0x4300) == 0x4300) | |
| brcmf_dbg(USB, "chip %x rev 0x%x\n", chipid, chiprev); | |
| else | |
| brcmf_dbg(USB, "chip %d rev 0x%x\n", chipid, chiprev); | |
| if (chipid == BRCMF_POSTBOOT_ID) { | |
| brcmf_dbg(USB, "firmware already downloaded\n"); | |
| brcmf_usb_dl_cmd(devinfo, DL_RESETCFG, &id, sizeof(id)); | |
| return false; | |
| } else { | |
| devinfo->bus_pub.devid = chipid; | |
| devinfo->bus_pub.chiprev = chiprev; | |
| } | |
| return true; | |
| } | |
| static int | |
| brcmf_usb_resetcfg(struct brcmf_usbdev_info *devinfo) | |
| { | |
| struct bootrom_id_le id; | |
| u32 loop_cnt; | |
| int err; | |
| brcmf_dbg(USB, "Enter\n"); | |
| loop_cnt = 0; | |
| do { | |
| mdelay(BRCMF_USB_RESET_GETVER_SPINWAIT); | |
| loop_cnt++; | |
| id.chip = cpu_to_le32(0xDEAD); /* Get the ID */ | |
| err = brcmf_usb_dl_cmd(devinfo, DL_GETVER, &id, sizeof(id)); | |
| if ((err) && (err != -ETIMEDOUT)) | |
| return err; | |
| if (id.chip == cpu_to_le32(BRCMF_POSTBOOT_ID)) | |
| break; | |
| } while (loop_cnt < BRCMF_USB_RESET_GETVER_LOOP_CNT); | |
| if (id.chip == cpu_to_le32(BRCMF_POSTBOOT_ID)) { | |
| brcmf_dbg(USB, "postboot chip 0x%x/rev 0x%x\n", | |
| le32_to_cpu(id.chip), le32_to_cpu(id.chiprev)); | |
| brcmf_usb_dl_cmd(devinfo, DL_RESETCFG, &id, sizeof(id)); | |
| return 0; | |
| } else { | |
| brcmf_err("Cannot talk to Dongle. Firmware is not UP, %d ms\n", | |
| BRCMF_USB_RESET_GETVER_SPINWAIT * loop_cnt); | |
| return -EINVAL; | |
| } | |
| } | |
| static int | |
| brcmf_usb_dl_send_bulk(struct brcmf_usbdev_info *devinfo, void *buffer, int len) | |
| { | |
| int ret; | |
| if ((devinfo == NULL) || (devinfo->bulk_urb == NULL)) | |
| return -EINVAL; | |
| /* Prepare the URB */ | |
| usb_fill_bulk_urb(devinfo->bulk_urb, devinfo->usbdev, | |
| devinfo->tx_pipe, buffer, len, | |
| (usb_complete_t)brcmf_usb_sync_complete, devinfo); | |
| devinfo->bulk_urb->transfer_flags |= URB_ZERO_PACKET; | |
| devinfo->ctl_completed = false; | |
| ret = usb_submit_urb(devinfo->bulk_urb, GFP_ATOMIC); | |
| if (ret) { | |
| brcmf_err("usb_submit_urb failed %d\n", ret); | |
| return ret; | |
| } | |
| ret = brcmf_usb_ioctl_resp_wait(devinfo); | |
| return (ret == 0); | |
| } | |
| static int | |
| brcmf_usb_dl_writeimage(struct brcmf_usbdev_info *devinfo, u8 *fw, int fwlen) | |
| { | |
| unsigned int sendlen, sent, dllen; | |
| char *bulkchunk = NULL, *dlpos; | |
| struct rdl_state_le state; | |
| u32 rdlstate, rdlbytes; | |
| int err = 0; | |
| brcmf_dbg(USB, "Enter, fw %p, len %d\n", fw, fwlen); | |
| bulkchunk = kmalloc(TRX_RDL_CHUNK, GFP_ATOMIC); | |
| if (bulkchunk == NULL) { | |
| err = -ENOMEM; | |
| goto fail; | |
| } | |
| /* 1) Prepare USB boot loader for runtime image */ | |
| brcmf_usb_dl_cmd(devinfo, DL_START, &state, sizeof(state)); | |
| rdlstate = le32_to_cpu(state.state); | |
| rdlbytes = le32_to_cpu(state.bytes); | |
| /* 2) Check we are in the Waiting state */ | |
| if (rdlstate != DL_WAITING) { | |
| brcmf_err("Failed to DL_START\n"); | |
| err = -EINVAL; | |
| goto fail; | |
| } | |
| sent = 0; | |
| dlpos = fw; | |
| dllen = fwlen; | |
| /* Get chip id and rev */ | |
| while (rdlbytes != dllen) { | |
| /* Wait until the usb device reports it received all | |
| * the bytes we sent */ | |
| if ((rdlbytes == sent) && (rdlbytes != dllen)) { | |
| if ((dllen-sent) < TRX_RDL_CHUNK) | |
| sendlen = dllen-sent; | |
| else | |
| sendlen = TRX_RDL_CHUNK; | |
| /* simply avoid having to send a ZLP by ensuring we | |
| * never have an even | |
| * multiple of 64 | |
| */ | |
| if (!(sendlen % 64)) | |
| sendlen -= 4; | |
| /* send data */ | |
| memcpy(bulkchunk, dlpos, sendlen); | |
| if (brcmf_usb_dl_send_bulk(devinfo, bulkchunk, | |
| sendlen)) { | |
| brcmf_err("send_bulk failed\n"); | |
| err = -EINVAL; | |
| goto fail; | |
| } | |
| dlpos += sendlen; | |
| sent += sendlen; | |
| } | |
| err = brcmf_usb_dl_cmd(devinfo, DL_GETSTATE, &state, | |
| sizeof(state)); | |
| if (err) { | |
| brcmf_err("DL_GETSTATE Failed\n"); | |
| goto fail; | |
| } | |
| rdlstate = le32_to_cpu(state.state); | |
| rdlbytes = le32_to_cpu(state.bytes); | |
| /* restart if an error is reported */ | |
| if (rdlstate == DL_BAD_HDR || rdlstate == DL_BAD_CRC) { | |
| brcmf_err("Bad Hdr or Bad CRC state %d\n", | |
| rdlstate); | |
| err = -EINVAL; | |
| goto fail; | |
| } | |
| } | |
| fail: | |
| kfree(bulkchunk); | |
| brcmf_dbg(USB, "Exit, err=%d\n", err); | |
| return err; | |
| } | |
| static int brcmf_usb_dlstart(struct brcmf_usbdev_info *devinfo, u8 *fw, int len) | |
| { | |
| int err; | |
| brcmf_dbg(USB, "Enter\n"); | |
| if (devinfo == NULL) | |
| return -EINVAL; | |
| if (devinfo->bus_pub.devid == 0xDEAD) | |
| return -EINVAL; | |
| err = brcmf_usb_dl_writeimage(devinfo, fw, len); | |
| if (err == 0) | |
| devinfo->bus_pub.state = BRCMFMAC_USB_STATE_DL_DONE; | |
| else | |
| devinfo->bus_pub.state = BRCMFMAC_USB_STATE_DL_FAIL; | |
| brcmf_dbg(USB, "Exit, err=%d\n", err); | |
| return err; | |
| } | |
| static int brcmf_usb_dlrun(struct brcmf_usbdev_info *devinfo) | |
| { | |
| struct rdl_state_le state; | |
| brcmf_dbg(USB, "Enter\n"); | |
| if (!devinfo) | |
| return -EINVAL; | |
| if (devinfo->bus_pub.devid == 0xDEAD) | |
| return -EINVAL; | |
| /* Check we are runnable */ | |
| state.state = 0; | |
| brcmf_usb_dl_cmd(devinfo, DL_GETSTATE, &state, sizeof(state)); | |
| /* Start the image */ | |
| if (state.state == cpu_to_le32(DL_RUNNABLE)) { | |
| if (brcmf_usb_dl_cmd(devinfo, DL_GO, &state, sizeof(state))) | |
| return -ENODEV; | |
| if (brcmf_usb_resetcfg(devinfo)) | |
| return -ENODEV; | |
| /* The Dongle may go for re-enumeration. */ | |
| } else { | |
| brcmf_err("Dongle not runnable\n"); | |
| return -EINVAL; | |
| } | |
| brcmf_dbg(USB, "Exit\n"); | |
| return 0; | |
| } | |
| static bool brcmf_usb_chip_support(int chipid, int chiprev) | |
| { | |
| switch(chipid) { | |
| case BRCM_CC_43143_CHIP_ID: | |
| return true; | |
| case BRCM_CC_43235_CHIP_ID: | |
| case BRCM_CC_43236_CHIP_ID: | |
| case BRCM_CC_43238_CHIP_ID: | |
| return (chiprev == 3); | |
| case BRCM_CC_43242_CHIP_ID: | |
| return true; | |
| case BRCM_CC_43566_CHIP_ID: | |
| case BRCM_CC_43569_CHIP_ID: | |
| return true; | |
| default: | |
| break; | |
| } | |
| return false; | |
| } | |
| static int | |
| brcmf_usb_fw_download(struct brcmf_usbdev_info *devinfo) | |
| { | |
| int devid, chiprev; | |
| int err; | |
| brcmf_dbg(USB, "Enter\n"); | |
| if (devinfo == NULL) | |
| return -ENODEV; | |
| devid = devinfo->bus_pub.devid; | |
| chiprev = devinfo->bus_pub.chiprev; | |
| if (!brcmf_usb_chip_support(devid, chiprev)) { | |
| brcmf_err("unsupported chip %d rev %d\n", | |
| devid, chiprev); | |
| return -EINVAL; | |
| } | |
| if (!devinfo->image) { | |
| brcmf_err("No firmware!\n"); | |
| return -ENOENT; | |
| } | |
| err = brcmf_usb_dlstart(devinfo, | |
| (u8 *)devinfo->image, devinfo->image_len); | |
| if (err == 0) | |
| err = brcmf_usb_dlrun(devinfo); | |
| return err; | |
| } | |
| static void brcmf_usb_detach(struct brcmf_usbdev_info *devinfo) | |
| { | |
| brcmf_dbg(USB, "Enter, devinfo %p\n", devinfo); | |
| /* free the URBS */ | |
| brcmf_usb_free_q(&devinfo->rx_freeq, false); | |
| brcmf_usb_free_q(&devinfo->tx_freeq, false); | |
| usb_free_urb(devinfo->ctl_urb); | |
| usb_free_urb(devinfo->bulk_urb); | |
| kfree(devinfo->tx_reqs); | |
| kfree(devinfo->rx_reqs); | |
| } | |
| static int check_file(const u8 *headers) | |
| { | |
| struct trx_header_le *trx; | |
| int actual_len = -1; | |
| brcmf_dbg(USB, "Enter\n"); | |
| /* Extract trx header */ | |
| trx = (struct trx_header_le *) headers; | |
| if (trx->magic != cpu_to_le32(TRX_MAGIC)) | |
| return -1; | |
| headers += sizeof(struct trx_header_le); | |
| if (le32_to_cpu(trx->flag_version) & TRX_UNCOMP_IMAGE) { | |
| actual_len = le32_to_cpu(trx->offsets[TRX_OFFSETS_DLFWLEN_IDX]); | |
| return actual_len + sizeof(struct trx_header_le); | |
| } | |
| return -1; | |
| } | |
| static const char *brcmf_usb_get_fwname(struct brcmf_usbdev_info *devinfo) | |
| { | |
| switch (devinfo->bus_pub.devid) { | |
| case BRCM_CC_43143_CHIP_ID: | |
| return BRCMF_USB_43143_FW_NAME; | |
| case BRCM_CC_43235_CHIP_ID: | |
| case BRCM_CC_43236_CHIP_ID: | |
| case BRCM_CC_43238_CHIP_ID: | |
| return BRCMF_USB_43236_FW_NAME; | |
| case BRCM_CC_43242_CHIP_ID: | |
| return BRCMF_USB_43242_FW_NAME; | |
| case BRCM_CC_43566_CHIP_ID: | |
| case BRCM_CC_43569_CHIP_ID: | |
| return BRCMF_USB_43569_FW_NAME; | |
| default: | |
| return NULL; | |
| } | |
| } | |
| static | |
| struct brcmf_usbdev *brcmf_usb_attach(struct brcmf_usbdev_info *devinfo, | |
| int nrxq, int ntxq) | |
| { | |
| brcmf_dbg(USB, "Enter\n"); | |
| devinfo->bus_pub.nrxq = nrxq; | |
| devinfo->rx_low_watermark = nrxq / 2; | |
| devinfo->bus_pub.devinfo = devinfo; | |
| devinfo->bus_pub.ntxq = ntxq; | |
| devinfo->bus_pub.state = BRCMFMAC_USB_STATE_DOWN; | |
| /* flow control when too many tx urbs posted */ | |
| devinfo->tx_low_watermark = ntxq / 4; | |
| devinfo->tx_high_watermark = devinfo->tx_low_watermark * 3; | |
| devinfo->bus_pub.bus_mtu = BRCMF_USB_MAX_PKT_SIZE; | |
| /* Initialize other structure content */ | |
| init_waitqueue_head(&devinfo->ioctl_resp_wait); | |
| /* Initialize the spinlocks */ | |
| spin_lock_init(&devinfo->qlock); | |
| spin_lock_init(&devinfo->tx_flowblock_lock); | |
| INIT_LIST_HEAD(&devinfo->rx_freeq); | |
| INIT_LIST_HEAD(&devinfo->rx_postq); | |
| INIT_LIST_HEAD(&devinfo->tx_freeq); | |
| INIT_LIST_HEAD(&devinfo->tx_postq); | |
| devinfo->tx_flowblock = false; | |
| devinfo->rx_reqs = brcmf_usbdev_qinit(&devinfo->rx_freeq, nrxq); | |
| if (!devinfo->rx_reqs) | |
| goto error; | |
| devinfo->tx_reqs = brcmf_usbdev_qinit(&devinfo->tx_freeq, ntxq); | |
| if (!devinfo->tx_reqs) | |
| goto error; | |
| devinfo->tx_freecount = ntxq; | |
| devinfo->ctl_urb = usb_alloc_urb(0, GFP_ATOMIC); | |
| if (!devinfo->ctl_urb) { | |
| brcmf_err("usb_alloc_urb (ctl) failed\n"); | |
| goto error; | |
| } | |
| devinfo->bulk_urb = usb_alloc_urb(0, GFP_ATOMIC); | |
| if (!devinfo->bulk_urb) { | |
| brcmf_err("usb_alloc_urb (bulk) failed\n"); | |
| goto error; | |
| } | |
| return &devinfo->bus_pub; | |
| error: | |
| brcmf_err("failed!\n"); | |
| brcmf_usb_detach(devinfo); | |
| return NULL; | |
| } | |
| static void brcmf_usb_wowl_config(struct device *dev, bool enabled) | |
| { | |
| struct brcmf_usbdev_info *devinfo = brcmf_usb_get_businfo(dev); | |
| brcmf_dbg(USB, "Configuring WOWL, enabled=%d\n", enabled); | |
| devinfo->wowl_enabled = enabled; | |
| if (enabled) | |
| device_set_wakeup_enable(devinfo->dev, true); | |
| else | |
| device_set_wakeup_enable(devinfo->dev, false); | |
| } | |
| static struct brcmf_bus_ops brcmf_usb_bus_ops = { | |
| .txdata = brcmf_usb_tx, | |
| .stop = brcmf_usb_down, | |
| .txctl = brcmf_usb_tx_ctlpkt, | |
| .rxctl = brcmf_usb_rx_ctlpkt, | |
| .wowl_config = brcmf_usb_wowl_config, | |
| }; | |
| static int brcmf_usb_bus_setup(struct brcmf_usbdev_info *devinfo) | |
| { | |
| int ret; | |
| /* Attach to the common driver interface */ | |
| ret = brcmf_attach(devinfo->dev); | |
| if (ret) { | |
| brcmf_err("brcmf_attach failed\n"); | |
| return ret; | |
| } | |
| ret = brcmf_usb_up(devinfo->dev); | |
| if (ret) | |
| goto fail; | |
| ret = brcmf_bus_start(devinfo->dev); | |
| if (ret) | |
| goto fail; | |
| return 0; | |
| fail: | |
| brcmf_detach(devinfo->dev); | |
| return ret; | |
| } | |
| static void brcmf_usb_probe_phase2(struct device *dev, | |
| const struct firmware *fw, | |
| void *nvram, u32 nvlen) | |
| { | |
| struct brcmf_bus *bus = dev_get_drvdata(dev); | |
| struct brcmf_usbdev_info *devinfo; | |
| int ret; | |
| brcmf_dbg(USB, "Start fw downloading\n"); | |
| devinfo = bus->bus_priv.usb->devinfo; | |
| ret = check_file(fw->data); | |
| if (ret < 0) { | |
| brcmf_err("invalid firmware\n"); | |
| release_firmware(fw); | |
| goto error; | |
| } | |
| devinfo->image = fw->data; | |
| devinfo->image_len = fw->size; | |
| ret = brcmf_usb_fw_download(devinfo); | |
| release_firmware(fw); | |
| if (ret) | |
| goto error; | |
| ret = brcmf_usb_bus_setup(devinfo); | |
| if (ret) | |
| goto error; | |
| mutex_unlock(&devinfo->dev_init_lock); | |
| return; | |
| error: | |
| brcmf_dbg(TRACE, "failed: dev=%s, err=%d\n", dev_name(dev), ret); | |
| mutex_unlock(&devinfo->dev_init_lock); | |
| device_release_driver(dev); | |
| } | |
| static int brcmf_usb_probe_cb(struct brcmf_usbdev_info *devinfo) | |
| { | |
| struct brcmf_bus *bus = NULL; | |
| struct brcmf_usbdev *bus_pub = NULL; | |
| struct device *dev = devinfo->dev; | |
| int ret; | |
| brcmf_dbg(USB, "Enter\n"); | |
| bus_pub = brcmf_usb_attach(devinfo, BRCMF_USB_NRXQ, BRCMF_USB_NTXQ); | |
| if (!bus_pub) | |
| return -ENODEV; | |
| bus = kzalloc(sizeof(struct brcmf_bus), GFP_ATOMIC); | |
| if (!bus) { | |
| ret = -ENOMEM; | |
| goto fail; | |
| } | |
| bus->dev = dev; | |
| bus_pub->bus = bus; | |
| bus->bus_priv.usb = bus_pub; | |
| dev_set_drvdata(dev, bus); | |
| bus->ops = &brcmf_usb_bus_ops; | |
| bus->proto_type = BRCMF_PROTO_BCDC; | |
| bus->always_use_fws_queue = true; | |
| #ifdef CONFIG_PM | |
| bus->wowl_supported = true; | |
| #endif | |
| if (!brcmf_usb_dlneeded(devinfo)) { | |
| ret = brcmf_usb_bus_setup(devinfo); | |
| if (ret) | |
| goto fail; | |
| /* we are done */ | |
| mutex_unlock(&devinfo->dev_init_lock); | |
| return 0; | |
| } | |
| bus->chip = bus_pub->devid; | |
| bus->chiprev = bus_pub->chiprev; | |
| /* request firmware here */ | |
| ret = brcmf_fw_get_firmwares(dev, 0, brcmf_usb_get_fwname(devinfo), | |
| NULL, brcmf_usb_probe_phase2); | |
| if (ret) { | |
| brcmf_err("firmware request failed: %d\n", ret); | |
| goto fail; | |
| } | |
| return 0; | |
| fail: | |
| /* Release resources in reverse order */ | |
| kfree(bus); | |
| brcmf_usb_detach(devinfo); | |
| return ret; | |
| } | |
| static void | |
| brcmf_usb_disconnect_cb(struct brcmf_usbdev_info *devinfo) | |
| { | |
| if (!devinfo) | |
| return; | |
| brcmf_dbg(USB, "Enter, bus_pub %p\n", devinfo); | |
| brcmf_detach(devinfo->dev); | |
| kfree(devinfo->bus_pub.bus); | |
| brcmf_usb_detach(devinfo); | |
| } | |
| static int | |
| brcmf_usb_probe(struct usb_interface *intf, const struct usb_device_id *id) | |
| { | |
| struct usb_device *usb = interface_to_usbdev(intf); | |
| struct brcmf_usbdev_info *devinfo; | |
| struct usb_interface_descriptor *desc; | |
| struct usb_endpoint_descriptor *endpoint; | |
| int ret = 0; | |
| u32 num_of_eps; | |
| u8 endpoint_num, ep; | |
| brcmf_dbg(USB, "Enter 0x%04x:0x%04x\n", id->idVendor, id->idProduct); | |
| devinfo = kzalloc(sizeof(*devinfo), GFP_ATOMIC); | |
| if (devinfo == NULL) | |
| return -ENOMEM; | |
| devinfo->usbdev = usb; | |
| devinfo->dev = &usb->dev; | |
| /* Take an init lock, to protect for disconnect while still loading. | |
| * Necessary because of the asynchronous firmware load construction | |
| */ | |
| mutex_init(&devinfo->dev_init_lock); | |
| mutex_lock(&devinfo->dev_init_lock); | |
| usb_set_intfdata(intf, devinfo); | |
| /* Check that the device supports only one configuration */ | |
| if (usb->descriptor.bNumConfigurations != 1) { | |
| brcmf_err("Number of configurations: %d not supported\n", | |
| usb->descriptor.bNumConfigurations); | |
| ret = -ENODEV; | |
| goto fail; | |
| } | |
| if ((usb->descriptor.bDeviceClass != USB_CLASS_VENDOR_SPEC) && | |
| (usb->descriptor.bDeviceClass != USB_CLASS_MISC) && | |
| (usb->descriptor.bDeviceClass != USB_CLASS_WIRELESS_CONTROLLER)) { | |
| brcmf_err("Device class: 0x%x not supported\n", | |
| usb->descriptor.bDeviceClass); | |
| ret = -ENODEV; | |
| goto fail; | |
| } | |
| desc = &intf->altsetting[0].desc; | |
| if ((desc->bInterfaceClass != USB_CLASS_VENDOR_SPEC) || | |
| (desc->bInterfaceSubClass != 2) || | |
| (desc->bInterfaceProtocol != 0xff)) { | |
| brcmf_err("non WLAN interface %d: 0x%x:0x%x:0x%x\n", | |
| desc->bInterfaceNumber, desc->bInterfaceClass, | |
| desc->bInterfaceSubClass, desc->bInterfaceProtocol); | |
| ret = -ENODEV; | |
| goto fail; | |
| } | |
| num_of_eps = desc->bNumEndpoints; | |
| for (ep = 0; ep < num_of_eps; ep++) { | |
| endpoint = &intf->altsetting[0].endpoint[ep].desc; | |
| endpoint_num = usb_endpoint_num(endpoint); | |
| if (!usb_endpoint_xfer_bulk(endpoint)) | |
| continue; | |
| if (usb_endpoint_dir_in(endpoint)) { | |
| if (!devinfo->rx_pipe) | |
| devinfo->rx_pipe = | |
| usb_rcvbulkpipe(usb, endpoint_num); | |
| } else { | |
| if (!devinfo->tx_pipe) | |
| devinfo->tx_pipe = | |
| usb_sndbulkpipe(usb, endpoint_num); | |
| } | |
| } | |
| if (devinfo->rx_pipe == 0) { | |
| brcmf_err("No RX (in) Bulk EP found\n"); | |
| ret = -ENODEV; | |
| goto fail; | |
| } | |
| if (devinfo->tx_pipe == 0) { | |
| brcmf_err("No TX (out) Bulk EP found\n"); | |
| ret = -ENODEV; | |
| goto fail; | |
| } | |
| devinfo->ifnum = desc->bInterfaceNumber; | |
| if (usb->speed == USB_SPEED_SUPER) | |
| brcmf_dbg(USB, "Broadcom super speed USB WLAN interface detected\n"); | |
| else if (usb->speed == USB_SPEED_HIGH) | |
| brcmf_dbg(USB, "Broadcom high speed USB WLAN interface detected\n"); | |
| else | |
| brcmf_dbg(USB, "Broadcom full speed USB WLAN interface detected\n"); | |
| ret = brcmf_usb_probe_cb(devinfo); | |
| if (ret) | |
| goto fail; | |
| /* Success */ | |
| return 0; | |
| fail: | |
| mutex_unlock(&devinfo->dev_init_lock); | |
| kfree(devinfo); | |
| usb_set_intfdata(intf, NULL); | |
| return ret; | |
| } | |
| static void | |
| brcmf_usb_disconnect(struct usb_interface *intf) | |
| { | |
| struct brcmf_usbdev_info *devinfo; | |
| brcmf_dbg(USB, "Enter\n"); | |
| devinfo = (struct brcmf_usbdev_info *)usb_get_intfdata(intf); | |
| if (devinfo) { | |
| mutex_lock(&devinfo->dev_init_lock); | |
| /* Make sure that devinfo still exists. Firmware probe routines | |
| * may have released the device and cleared the intfdata. | |
| */ | |
| if (!usb_get_intfdata(intf)) | |
| goto done; | |
| brcmf_usb_disconnect_cb(devinfo); | |
| kfree(devinfo); | |
| } | |
| done: | |
| brcmf_dbg(USB, "Exit\n"); | |
| } | |
| /* | |
| * only need to signal the bus being down and update the state. | |
| */ | |
| static int brcmf_usb_suspend(struct usb_interface *intf, pm_message_t state) | |
| { | |
| struct usb_device *usb = interface_to_usbdev(intf); | |
| struct brcmf_usbdev_info *devinfo = brcmf_usb_get_businfo(&usb->dev); | |
| brcmf_dbg(USB, "Enter\n"); | |
| devinfo->bus_pub.state = BRCMFMAC_USB_STATE_SLEEP; | |
| if (devinfo->wowl_enabled) | |
| brcmf_cancel_all_urbs(devinfo); | |
| else | |
| brcmf_detach(&usb->dev); | |
| return 0; | |
| } | |
| /* | |
| * (re-) start the bus. | |
| */ | |
| static int brcmf_usb_resume(struct usb_interface *intf) | |
| { | |
| struct usb_device *usb = interface_to_usbdev(intf); | |
| struct brcmf_usbdev_info *devinfo = brcmf_usb_get_businfo(&usb->dev); | |
| brcmf_dbg(USB, "Enter\n"); | |
| if (!devinfo->wowl_enabled) | |
| return brcmf_usb_bus_setup(devinfo); | |
| devinfo->bus_pub.state = BRCMFMAC_USB_STATE_UP; | |
| brcmf_usb_rx_fill_all(devinfo); | |
| return 0; | |
| } | |
| static int brcmf_usb_reset_resume(struct usb_interface *intf) | |
| { | |
| struct usb_device *usb = interface_to_usbdev(intf); | |
| struct brcmf_usbdev_info *devinfo = brcmf_usb_get_businfo(&usb->dev); | |
| brcmf_dbg(USB, "Enter\n"); | |
| return brcmf_fw_get_firmwares(&usb->dev, 0, | |
| brcmf_usb_get_fwname(devinfo), NULL, | |
| brcmf_usb_probe_phase2); | |
| } | |
| #define BRCMF_USB_DEVICE(dev_id) \ | |
| { USB_DEVICE(BRCM_USB_VENDOR_ID_BROADCOM, dev_id) } | |
| static struct usb_device_id brcmf_usb_devid_table[] = { | |
| BRCMF_USB_DEVICE(BRCM_USB_43143_DEVICE_ID), | |
| BRCMF_USB_DEVICE(BRCM_USB_43236_DEVICE_ID), | |
| BRCMF_USB_DEVICE(BRCM_USB_43242_DEVICE_ID), | |
| BRCMF_USB_DEVICE(BRCM_USB_43569_DEVICE_ID), | |
| /* special entry for device with firmware loaded and running */ | |
| BRCMF_USB_DEVICE(BRCM_USB_BCMFW_DEVICE_ID), | |
| { /* end: all zeroes */ } | |
| }; | |
| MODULE_DEVICE_TABLE(usb, brcmf_usb_devid_table); | |
| MODULE_FIRMWARE(BRCMF_USB_43143_FW_NAME); | |
| MODULE_FIRMWARE(BRCMF_USB_43236_FW_NAME); | |
| MODULE_FIRMWARE(BRCMF_USB_43242_FW_NAME); | |
| MODULE_FIRMWARE(BRCMF_USB_43569_FW_NAME); | |
| static struct usb_driver brcmf_usbdrvr = { | |
| .name = KBUILD_MODNAME, | |
| .probe = brcmf_usb_probe, | |
| .disconnect = brcmf_usb_disconnect, | |
| .id_table = brcmf_usb_devid_table, | |
| .suspend = brcmf_usb_suspend, | |
| .resume = brcmf_usb_resume, | |
| .reset_resume = brcmf_usb_reset_resume, | |
| .supports_autosuspend = 1, | |
| .disable_hub_initiated_lpm = 1, | |
| }; | |
| static int brcmf_usb_reset_device(struct device *dev, void *notused) | |
| { | |
| /* device past is the usb interface so we | |
| * need to use parent here. | |
| */ | |
| brcmf_dev_reset(dev->parent); | |
| return 0; | |
| } | |
| void brcmf_usb_exit(void) | |
| { | |
| struct device_driver *drv = &brcmf_usbdrvr.drvwrap.driver; | |
| int ret; | |
| brcmf_dbg(USB, "Enter\n"); | |
| ret = driver_for_each_device(drv, NULL, NULL, | |
| brcmf_usb_reset_device); | |
| usb_deregister(&brcmf_usbdrvr); | |
| } | |
| void brcmf_usb_register(void) | |
| { | |
| brcmf_dbg(USB, "Enter\n"); | |
| usb_register(&brcmf_usbdrvr); | |
| } |