| /* | |
| * Device handling thread implementation for mac80211 ST-Ericsson CW1200 drivers | |
| * | |
| * Copyright (c) 2010, ST-Ericsson | |
| * Author: Dmitry Tarnyagin <dmitry.tarnyagin@lockless.no> | |
| * | |
| * Based on: | |
| * ST-Ericsson UMAC CW1200 driver, which is | |
| * Copyright (c) 2010, ST-Ericsson | |
| * Author: Ajitpal Singh <ajitpal.singh@stericsson.com> | |
| * | |
| * This program is free software; you can redistribute it and/or modify | |
| * it under the terms of the GNU General Public License version 2 as | |
| * published by the Free Software Foundation. | |
| */ | |
| #include <linux/module.h> | |
| #include <net/mac80211.h> | |
| #include <linux/kthread.h> | |
| #include <linux/timer.h> | |
| #include "cw1200.h" | |
| #include "bh.h" | |
| #include "hwio.h" | |
| #include "wsm.h" | |
| #include "hwbus.h" | |
| #include "debug.h" | |
| #include "fwio.h" | |
| static int cw1200_bh(void *arg); | |
| #define DOWNLOAD_BLOCK_SIZE_WR (0x1000 - 4) | |
| /* an SPI message cannot be bigger than (2"12-1)*2 bytes | |
| * "*2" to cvt to bytes | |
| */ | |
| #define MAX_SZ_RD_WR_BUFFERS (DOWNLOAD_BLOCK_SIZE_WR*2) | |
| #define PIGGYBACK_CTRL_REG (2) | |
| #define EFFECTIVE_BUF_SIZE (MAX_SZ_RD_WR_BUFFERS - PIGGYBACK_CTRL_REG) | |
| /* Suspend state privates */ | |
| enum cw1200_bh_pm_state { | |
| CW1200_BH_RESUMED = 0, | |
| CW1200_BH_SUSPEND, | |
| CW1200_BH_SUSPENDED, | |
| CW1200_BH_RESUME, | |
| }; | |
| typedef int (*cw1200_wsm_handler)(struct cw1200_common *priv, | |
| u8 *data, size_t size); | |
| static void cw1200_bh_work(struct work_struct *work) | |
| { | |
| struct cw1200_common *priv = | |
| container_of(work, struct cw1200_common, bh_work); | |
| cw1200_bh(priv); | |
| } | |
| int cw1200_register_bh(struct cw1200_common *priv) | |
| { | |
| int err = 0; | |
| /* Realtime workqueue */ | |
| priv->bh_workqueue = alloc_workqueue("cw1200_bh", | |
| WQ_MEM_RECLAIM | WQ_HIGHPRI | |
| | WQ_CPU_INTENSIVE, 1); | |
| if (!priv->bh_workqueue) | |
| return -ENOMEM; | |
| INIT_WORK(&priv->bh_work, cw1200_bh_work); | |
| pr_debug("[BH] register.\n"); | |
| atomic_set(&priv->bh_rx, 0); | |
| atomic_set(&priv->bh_tx, 0); | |
| atomic_set(&priv->bh_term, 0); | |
| atomic_set(&priv->bh_suspend, CW1200_BH_RESUMED); | |
| priv->bh_error = 0; | |
| priv->hw_bufs_used = 0; | |
| priv->buf_id_tx = 0; | |
| priv->buf_id_rx = 0; | |
| init_waitqueue_head(&priv->bh_wq); | |
| init_waitqueue_head(&priv->bh_evt_wq); | |
| err = !queue_work(priv->bh_workqueue, &priv->bh_work); | |
| WARN_ON(err); | |
| return err; | |
| } | |
| void cw1200_unregister_bh(struct cw1200_common *priv) | |
| { | |
| atomic_add(1, &priv->bh_term); | |
| wake_up(&priv->bh_wq); | |
| flush_workqueue(priv->bh_workqueue); | |
| destroy_workqueue(priv->bh_workqueue); | |
| priv->bh_workqueue = NULL; | |
| pr_debug("[BH] unregistered.\n"); | |
| } | |
| void cw1200_irq_handler(struct cw1200_common *priv) | |
| { | |
| pr_debug("[BH] irq.\n"); | |
| /* Disable Interrupts! */ | |
| /* NOTE: hwbus_ops->lock already held */ | |
| __cw1200_irq_enable(priv, 0); | |
| if (/* WARN_ON */(priv->bh_error)) | |
| return; | |
| if (atomic_add_return(1, &priv->bh_rx) == 1) | |
| wake_up(&priv->bh_wq); | |
| } | |
| EXPORT_SYMBOL_GPL(cw1200_irq_handler); | |
| void cw1200_bh_wakeup(struct cw1200_common *priv) | |
| { | |
| pr_debug("[BH] wakeup.\n"); | |
| if (priv->bh_error) { | |
| pr_err("[BH] wakeup failed (BH error)\n"); | |
| return; | |
| } | |
| if (atomic_add_return(1, &priv->bh_tx) == 1) | |
| wake_up(&priv->bh_wq); | |
| } | |
| int cw1200_bh_suspend(struct cw1200_common *priv) | |
| { | |
| pr_debug("[BH] suspend.\n"); | |
| if (priv->bh_error) { | |
| wiphy_warn(priv->hw->wiphy, "BH error -- can't suspend\n"); | |
| return -EINVAL; | |
| } | |
| atomic_set(&priv->bh_suspend, CW1200_BH_SUSPEND); | |
| wake_up(&priv->bh_wq); | |
| return wait_event_timeout(priv->bh_evt_wq, priv->bh_error || | |
| (CW1200_BH_SUSPENDED == atomic_read(&priv->bh_suspend)), | |
| 1 * HZ) ? 0 : -ETIMEDOUT; | |
| } | |
| int cw1200_bh_resume(struct cw1200_common *priv) | |
| { | |
| pr_debug("[BH] resume.\n"); | |
| if (priv->bh_error) { | |
| wiphy_warn(priv->hw->wiphy, "BH error -- can't resume\n"); | |
| return -EINVAL; | |
| } | |
| atomic_set(&priv->bh_suspend, CW1200_BH_RESUME); | |
| wake_up(&priv->bh_wq); | |
| return wait_event_timeout(priv->bh_evt_wq, priv->bh_error || | |
| (CW1200_BH_RESUMED == atomic_read(&priv->bh_suspend)), | |
| 1 * HZ) ? 0 : -ETIMEDOUT; | |
| } | |
| static inline void wsm_alloc_tx_buffer(struct cw1200_common *priv) | |
| { | |
| ++priv->hw_bufs_used; | |
| } | |
| int wsm_release_tx_buffer(struct cw1200_common *priv, int count) | |
| { | |
| int ret = 0; | |
| int hw_bufs_used = priv->hw_bufs_used; | |
| priv->hw_bufs_used -= count; | |
| if (WARN_ON(priv->hw_bufs_used < 0)) | |
| ret = -1; | |
| else if (hw_bufs_used >= priv->wsm_caps.input_buffers) | |
| ret = 1; | |
| if (!priv->hw_bufs_used) | |
| wake_up(&priv->bh_evt_wq); | |
| return ret; | |
| } | |
| static int cw1200_bh_read_ctrl_reg(struct cw1200_common *priv, | |
| u16 *ctrl_reg) | |
| { | |
| int ret; | |
| ret = cw1200_reg_read_16(priv, | |
| ST90TDS_CONTROL_REG_ID, ctrl_reg); | |
| if (ret) { | |
| ret = cw1200_reg_read_16(priv, | |
| ST90TDS_CONTROL_REG_ID, ctrl_reg); | |
| if (ret) | |
| pr_err("[BH] Failed to read control register.\n"); | |
| } | |
| return ret; | |
| } | |
| static int cw1200_device_wakeup(struct cw1200_common *priv) | |
| { | |
| u16 ctrl_reg; | |
| int ret; | |
| pr_debug("[BH] Device wakeup.\n"); | |
| /* First, set the dpll register */ | |
| ret = cw1200_reg_write_32(priv, ST90TDS_TSET_GEN_R_W_REG_ID, | |
| cw1200_dpll_from_clk(priv->hw_refclk)); | |
| if (WARN_ON(ret)) | |
| return ret; | |
| /* To force the device to be always-on, the host sets WLAN_UP to 1 */ | |
| ret = cw1200_reg_write_16(priv, ST90TDS_CONTROL_REG_ID, | |
| ST90TDS_CONT_WUP_BIT); | |
| if (WARN_ON(ret)) | |
| return ret; | |
| ret = cw1200_bh_read_ctrl_reg(priv, &ctrl_reg); | |
| if (WARN_ON(ret)) | |
| return ret; | |
| /* If the device returns WLAN_RDY as 1, the device is active and will | |
| * remain active. | |
| */ | |
| if (ctrl_reg & ST90TDS_CONT_RDY_BIT) { | |
| pr_debug("[BH] Device awake.\n"); | |
| return 1; | |
| } | |
| return 0; | |
| } | |
| /* Must be called from BH thraed. */ | |
| void cw1200_enable_powersave(struct cw1200_common *priv, | |
| bool enable) | |
| { | |
| pr_debug("[BH] Powerave is %s.\n", | |
| enable ? "enabled" : "disabled"); | |
| priv->powersave_enabled = enable; | |
| } | |
| static int cw1200_bh_rx_helper(struct cw1200_common *priv, | |
| uint16_t *ctrl_reg, | |
| int *tx) | |
| { | |
| size_t read_len = 0; | |
| struct sk_buff *skb_rx = NULL; | |
| struct wsm_hdr *wsm; | |
| size_t wsm_len; | |
| u16 wsm_id; | |
| u8 wsm_seq; | |
| int rx_resync = 1; | |
| size_t alloc_len; | |
| u8 *data; | |
| read_len = (*ctrl_reg & ST90TDS_CONT_NEXT_LEN_MASK) * 2; | |
| if (!read_len) | |
| return 0; /* No more work */ | |
| if (WARN_ON((read_len < sizeof(struct wsm_hdr)) || | |
| (read_len > EFFECTIVE_BUF_SIZE))) { | |
| pr_debug("Invalid read len: %zu (%04x)", | |
| read_len, *ctrl_reg); | |
| goto err; | |
| } | |
| /* Add SIZE of PIGGYBACK reg (CONTROL Reg) | |
| * to the NEXT Message length + 2 Bytes for SKB | |
| */ | |
| read_len = read_len + 2; | |
| alloc_len = priv->hwbus_ops->align_size( | |
| priv->hwbus_priv, read_len); | |
| /* Check if not exceeding CW1200 capabilities */ | |
| if (WARN_ON_ONCE(alloc_len > EFFECTIVE_BUF_SIZE)) { | |
| pr_debug("Read aligned len: %zu\n", | |
| alloc_len); | |
| } | |
| skb_rx = dev_alloc_skb(alloc_len); | |
| if (WARN_ON(!skb_rx)) | |
| goto err; | |
| skb_trim(skb_rx, 0); | |
| skb_put(skb_rx, read_len); | |
| data = skb_rx->data; | |
| if (WARN_ON(!data)) | |
| goto err; | |
| if (WARN_ON(cw1200_data_read(priv, data, alloc_len))) { | |
| pr_err("rx blew up, len %zu\n", alloc_len); | |
| goto err; | |
| } | |
| /* Piggyback */ | |
| *ctrl_reg = __le16_to_cpu( | |
| ((__le16 *)data)[alloc_len / 2 - 1]); | |
| wsm = (struct wsm_hdr *)data; | |
| wsm_len = __le16_to_cpu(wsm->len); | |
| if (WARN_ON(wsm_len > read_len)) | |
| goto err; | |
| if (priv->wsm_enable_wsm_dumps) | |
| print_hex_dump_bytes("<-- ", | |
| DUMP_PREFIX_NONE, | |
| data, wsm_len); | |
| wsm_id = __le16_to_cpu(wsm->id) & 0xFFF; | |
| wsm_seq = (__le16_to_cpu(wsm->id) >> 13) & 7; | |
| skb_trim(skb_rx, wsm_len); | |
| if (wsm_id == 0x0800) { | |
| wsm_handle_exception(priv, | |
| &data[sizeof(*wsm)], | |
| wsm_len - sizeof(*wsm)); | |
| goto err; | |
| } else if (!rx_resync) { | |
| if (WARN_ON(wsm_seq != priv->wsm_rx_seq)) | |
| goto err; | |
| } | |
| priv->wsm_rx_seq = (wsm_seq + 1) & 7; | |
| rx_resync = 0; | |
| if (wsm_id & 0x0400) { | |
| int rc = wsm_release_tx_buffer(priv, 1); | |
| if (WARN_ON(rc < 0)) | |
| return rc; | |
| else if (rc > 0) | |
| *tx = 1; | |
| } | |
| /* cw1200_wsm_rx takes care on SKB livetime */ | |
| if (WARN_ON(wsm_handle_rx(priv, wsm_id, wsm, &skb_rx))) | |
| goto err; | |
| if (skb_rx) { | |
| dev_kfree_skb(skb_rx); | |
| skb_rx = NULL; | |
| } | |
| return 0; | |
| err: | |
| if (skb_rx) { | |
| dev_kfree_skb(skb_rx); | |
| skb_rx = NULL; | |
| } | |
| return -1; | |
| } | |
| static int cw1200_bh_tx_helper(struct cw1200_common *priv, | |
| int *pending_tx, | |
| int *tx_burst) | |
| { | |
| size_t tx_len; | |
| u8 *data; | |
| int ret; | |
| struct wsm_hdr *wsm; | |
| if (priv->device_can_sleep) { | |
| ret = cw1200_device_wakeup(priv); | |
| if (WARN_ON(ret < 0)) { /* Error in wakeup */ | |
| *pending_tx = 1; | |
| return 0; | |
| } else if (ret) { /* Woke up */ | |
| priv->device_can_sleep = false; | |
| } else { /* Did not awake */ | |
| *pending_tx = 1; | |
| return 0; | |
| } | |
| } | |
| wsm_alloc_tx_buffer(priv); | |
| ret = wsm_get_tx(priv, &data, &tx_len, tx_burst); | |
| if (ret <= 0) { | |
| wsm_release_tx_buffer(priv, 1); | |
| if (WARN_ON(ret < 0)) | |
| return ret; /* Error */ | |
| return 0; /* No work */ | |
| } | |
| wsm = (struct wsm_hdr *)data; | |
| BUG_ON(tx_len < sizeof(*wsm)); | |
| BUG_ON(__le16_to_cpu(wsm->len) != tx_len); | |
| atomic_add(1, &priv->bh_tx); | |
| tx_len = priv->hwbus_ops->align_size( | |
| priv->hwbus_priv, tx_len); | |
| /* Check if not exceeding CW1200 capabilities */ | |
| if (WARN_ON_ONCE(tx_len > EFFECTIVE_BUF_SIZE)) | |
| pr_debug("Write aligned len: %zu\n", tx_len); | |
| wsm->id &= __cpu_to_le16(0xffff ^ WSM_TX_SEQ(WSM_TX_SEQ_MAX)); | |
| wsm->id |= __cpu_to_le16(WSM_TX_SEQ(priv->wsm_tx_seq)); | |
| if (WARN_ON(cw1200_data_write(priv, data, tx_len))) { | |
| pr_err("tx blew up, len %zu\n", tx_len); | |
| wsm_release_tx_buffer(priv, 1); | |
| return -1; /* Error */ | |
| } | |
| if (priv->wsm_enable_wsm_dumps) | |
| print_hex_dump_bytes("--> ", | |
| DUMP_PREFIX_NONE, | |
| data, | |
| __le16_to_cpu(wsm->len)); | |
| wsm_txed(priv, data); | |
| priv->wsm_tx_seq = (priv->wsm_tx_seq + 1) & WSM_TX_SEQ_MAX; | |
| if (*tx_burst > 1) { | |
| cw1200_debug_tx_burst(priv); | |
| return 1; /* Work remains */ | |
| } | |
| return 0; | |
| } | |
| static int cw1200_bh(void *arg) | |
| { | |
| struct cw1200_common *priv = arg; | |
| int rx, tx, term, suspend; | |
| u16 ctrl_reg = 0; | |
| int tx_allowed; | |
| int pending_tx = 0; | |
| int tx_burst; | |
| long status; | |
| u32 dummy; | |
| int ret; | |
| for (;;) { | |
| if (!priv->hw_bufs_used && | |
| priv->powersave_enabled && | |
| !priv->device_can_sleep && | |
| !atomic_read(&priv->recent_scan)) { | |
| status = 1 * HZ; | |
| pr_debug("[BH] Device wakedown. No data.\n"); | |
| cw1200_reg_write_16(priv, ST90TDS_CONTROL_REG_ID, 0); | |
| priv->device_can_sleep = true; | |
| } else if (priv->hw_bufs_used) { | |
| /* Interrupt loss detection */ | |
| status = 1 * HZ; | |
| } else { | |
| status = MAX_SCHEDULE_TIMEOUT; | |
| } | |
| /* Dummy Read for SDIO retry mechanism*/ | |
| if ((priv->hw_type != -1) && | |
| (atomic_read(&priv->bh_rx) == 0) && | |
| (atomic_read(&priv->bh_tx) == 0)) | |
| cw1200_reg_read(priv, ST90TDS_CONFIG_REG_ID, | |
| &dummy, sizeof(dummy)); | |
| pr_debug("[BH] waiting ...\n"); | |
| status = wait_event_interruptible_timeout(priv->bh_wq, ({ | |
| rx = atomic_xchg(&priv->bh_rx, 0); | |
| tx = atomic_xchg(&priv->bh_tx, 0); | |
| term = atomic_xchg(&priv->bh_term, 0); | |
| suspend = pending_tx ? | |
| 0 : atomic_read(&priv->bh_suspend); | |
| (rx || tx || term || suspend || priv->bh_error); | |
| }), status); | |
| pr_debug("[BH] - rx: %d, tx: %d, term: %d, bh_err: %d, suspend: %d, status: %ld\n", | |
| rx, tx, term, suspend, priv->bh_error, status); | |
| /* Did an error occur? */ | |
| if ((status < 0 && status != -ERESTARTSYS) || | |
| term || priv->bh_error) { | |
| break; | |
| } | |
| if (!status) { /* wait_event timed out */ | |
| unsigned long timestamp = jiffies; | |
| long timeout; | |
| int pending = 0; | |
| int i; | |
| /* Check to see if we have any outstanding frames */ | |
| if (priv->hw_bufs_used && (!rx || !tx)) { | |
| wiphy_warn(priv->hw->wiphy, | |
| "Missed interrupt? (%d frames outstanding)\n", | |
| priv->hw_bufs_used); | |
| rx = 1; | |
| /* Get a timestamp of "oldest" frame */ | |
| for (i = 0; i < 4; ++i) | |
| pending += cw1200_queue_get_xmit_timestamp( | |
| &priv->tx_queue[i], | |
| ×tamp, | |
| priv->pending_frame_id); | |
| /* Check if frame transmission is timed out. | |
| * Add an extra second with respect to possible | |
| * interrupt loss. | |
| */ | |
| timeout = timestamp + | |
| WSM_CMD_LAST_CHANCE_TIMEOUT + | |
| 1 * HZ - | |
| jiffies; | |
| /* And terminate BH thread if the frame is "stuck" */ | |
| if (pending && timeout < 0) { | |
| wiphy_warn(priv->hw->wiphy, | |
| "Timeout waiting for TX confirm (%d/%d pending, %ld vs %lu).\n", | |
| priv->hw_bufs_used, pending, | |
| timestamp, jiffies); | |
| break; | |
| } | |
| } else if (!priv->device_can_sleep && | |
| !atomic_read(&priv->recent_scan)) { | |
| pr_debug("[BH] Device wakedown. Timeout.\n"); | |
| cw1200_reg_write_16(priv, | |
| ST90TDS_CONTROL_REG_ID, 0); | |
| priv->device_can_sleep = true; | |
| } | |
| goto done; | |
| } else if (suspend) { | |
| pr_debug("[BH] Device suspend.\n"); | |
| if (priv->powersave_enabled) { | |
| pr_debug("[BH] Device wakedown. Suspend.\n"); | |
| cw1200_reg_write_16(priv, | |
| ST90TDS_CONTROL_REG_ID, 0); | |
| priv->device_can_sleep = true; | |
| } | |
| atomic_set(&priv->bh_suspend, CW1200_BH_SUSPENDED); | |
| wake_up(&priv->bh_evt_wq); | |
| status = wait_event_interruptible(priv->bh_wq, | |
| CW1200_BH_RESUME == atomic_read(&priv->bh_suspend)); | |
| if (status < 0) { | |
| wiphy_err(priv->hw->wiphy, | |
| "Failed to wait for resume: %ld.\n", | |
| status); | |
| break; | |
| } | |
| pr_debug("[BH] Device resume.\n"); | |
| atomic_set(&priv->bh_suspend, CW1200_BH_RESUMED); | |
| wake_up(&priv->bh_evt_wq); | |
| atomic_add(1, &priv->bh_rx); | |
| goto done; | |
| } | |
| rx: | |
| tx += pending_tx; | |
| pending_tx = 0; | |
| if (cw1200_bh_read_ctrl_reg(priv, &ctrl_reg)) | |
| break; | |
| /* Don't bother trying to rx unless we have data to read */ | |
| if (ctrl_reg & ST90TDS_CONT_NEXT_LEN_MASK) { | |
| ret = cw1200_bh_rx_helper(priv, &ctrl_reg, &tx); | |
| if (ret < 0) | |
| break; | |
| /* Double up here if there's more data.. */ | |
| if (ctrl_reg & ST90TDS_CONT_NEXT_LEN_MASK) { | |
| ret = cw1200_bh_rx_helper(priv, &ctrl_reg, &tx); | |
| if (ret < 0) | |
| break; | |
| } | |
| } | |
| tx: | |
| if (tx) { | |
| tx = 0; | |
| BUG_ON(priv->hw_bufs_used > priv->wsm_caps.input_buffers); | |
| tx_burst = priv->wsm_caps.input_buffers - priv->hw_bufs_used; | |
| tx_allowed = tx_burst > 0; | |
| if (!tx_allowed) { | |
| /* Buffers full. Ensure we process tx | |
| * after we handle rx.. | |
| */ | |
| pending_tx = tx; | |
| goto done_rx; | |
| } | |
| ret = cw1200_bh_tx_helper(priv, &pending_tx, &tx_burst); | |
| if (ret < 0) | |
| break; | |
| if (ret > 0) /* More to transmit */ | |
| tx = ret; | |
| /* Re-read ctrl reg */ | |
| if (cw1200_bh_read_ctrl_reg(priv, &ctrl_reg)) | |
| break; | |
| } | |
| done_rx: | |
| if (priv->bh_error) | |
| break; | |
| if (ctrl_reg & ST90TDS_CONT_NEXT_LEN_MASK) | |
| goto rx; | |
| if (tx) | |
| goto tx; | |
| done: | |
| /* Re-enable device interrupts */ | |
| priv->hwbus_ops->lock(priv->hwbus_priv); | |
| __cw1200_irq_enable(priv, 1); | |
| priv->hwbus_ops->unlock(priv->hwbus_priv); | |
| } | |
| /* Explicitly disable device interrupts */ | |
| priv->hwbus_ops->lock(priv->hwbus_priv); | |
| __cw1200_irq_enable(priv, 0); | |
| priv->hwbus_ops->unlock(priv->hwbus_priv); | |
| if (!term) { | |
| pr_err("[BH] Fatal error, exiting.\n"); | |
| priv->bh_error = 1; | |
| /* TODO: schedule_work(recovery) */ | |
| } | |
| return 0; | |
| } |