| /* | |
| * mac80211 glue code for mac80211 ST-Ericsson CW1200 drivers | |
| * DebugFS code | |
| * | |
| * Copyright (c) 2010, ST-Ericsson | |
| * Author: Dmitry Tarnyagin <dmitry.tarnyagin@lockless.no> | |
| * | |
| * This program is free software; you can redistribute it and/or modify | |
| * it under the terms of the GNU General Public License version 2 as | |
| * published by the Free Software Foundation. | |
| */ | |
| #include <linux/module.h> | |
| #include <linux/debugfs.h> | |
| #include <linux/seq_file.h> | |
| #include "cw1200.h" | |
| #include "debug.h" | |
| #include "fwio.h" | |
| /* join_status */ | |
| static const char * const cw1200_debug_join_status[] = { | |
| "passive", | |
| "monitor", | |
| "station (joining)", | |
| "station (not authenticated yet)", | |
| "station", | |
| "adhoc", | |
| "access point", | |
| }; | |
| /* WSM_JOIN_PREAMBLE_... */ | |
| static const char * const cw1200_debug_preamble[] = { | |
| "long", | |
| "short", | |
| "long on 1 and 2 Mbps", | |
| }; | |
| static const char * const cw1200_debug_link_id[] = { | |
| "OFF", | |
| "REQ", | |
| "SOFT", | |
| "HARD", | |
| "RESET", | |
| "RESET_REMAP", | |
| }; | |
| static const char *cw1200_debug_mode(int mode) | |
| { | |
| switch (mode) { | |
| case NL80211_IFTYPE_UNSPECIFIED: | |
| return "unspecified"; | |
| case NL80211_IFTYPE_MONITOR: | |
| return "monitor"; | |
| case NL80211_IFTYPE_STATION: | |
| return "station"; | |
| case NL80211_IFTYPE_ADHOC: | |
| return "adhoc"; | |
| case NL80211_IFTYPE_MESH_POINT: | |
| return "mesh point"; | |
| case NL80211_IFTYPE_AP: | |
| return "access point"; | |
| case NL80211_IFTYPE_P2P_CLIENT: | |
| return "p2p client"; | |
| case NL80211_IFTYPE_P2P_GO: | |
| return "p2p go"; | |
| default: | |
| return "unsupported"; | |
| } | |
| } | |
| static void cw1200_queue_status_show(struct seq_file *seq, | |
| struct cw1200_queue *q) | |
| { | |
| int i; | |
| seq_printf(seq, "Queue %d:\n", q->queue_id); | |
| seq_printf(seq, " capacity: %zu\n", q->capacity); | |
| seq_printf(seq, " queued: %zu\n", q->num_queued); | |
| seq_printf(seq, " pending: %zu\n", q->num_pending); | |
| seq_printf(seq, " sent: %zu\n", q->num_sent); | |
| seq_printf(seq, " locked: %s\n", q->tx_locked_cnt ? "yes" : "no"); | |
| seq_printf(seq, " overfull: %s\n", q->overfull ? "yes" : "no"); | |
| seq_puts(seq, " link map: 0-> "); | |
| for (i = 0; i < q->stats->map_capacity; ++i) | |
| seq_printf(seq, "%.2d ", q->link_map_cache[i]); | |
| seq_printf(seq, "<-%zu\n", q->stats->map_capacity); | |
| } | |
| static void cw1200_debug_print_map(struct seq_file *seq, | |
| struct cw1200_common *priv, | |
| const char *label, | |
| u32 map) | |
| { | |
| int i; | |
| seq_printf(seq, "%s0-> ", label); | |
| for (i = 0; i < priv->tx_queue_stats.map_capacity; ++i) | |
| seq_printf(seq, "%s ", (map & BIT(i)) ? "**" : ".."); | |
| seq_printf(seq, "<-%zu\n", priv->tx_queue_stats.map_capacity - 1); | |
| } | |
| static int cw1200_status_show(struct seq_file *seq, void *v) | |
| { | |
| int i; | |
| struct list_head *item; | |
| struct cw1200_common *priv = seq->private; | |
| struct cw1200_debug_priv *d = priv->debug; | |
| seq_puts(seq, "CW1200 Wireless LAN driver status\n"); | |
| seq_printf(seq, "Hardware: %d.%d\n", | |
| priv->wsm_caps.hw_id, | |
| priv->wsm_caps.hw_subid); | |
| seq_printf(seq, "Firmware: %s %d.%d\n", | |
| cw1200_fw_types[priv->wsm_caps.fw_type], | |
| priv->wsm_caps.fw_ver, | |
| priv->wsm_caps.fw_build); | |
| seq_printf(seq, "FW API: %d\n", | |
| priv->wsm_caps.fw_api); | |
| seq_printf(seq, "FW caps: 0x%.4X\n", | |
| priv->wsm_caps.fw_cap); | |
| seq_printf(seq, "FW label: '%s'\n", | |
| priv->wsm_caps.fw_label); | |
| seq_printf(seq, "Mode: %s%s\n", | |
| cw1200_debug_mode(priv->mode), | |
| priv->listening ? " (listening)" : ""); | |
| seq_printf(seq, "Join state: %s\n", | |
| cw1200_debug_join_status[priv->join_status]); | |
| if (priv->channel) | |
| seq_printf(seq, "Channel: %d%s\n", | |
| priv->channel->hw_value, | |
| priv->channel_switch_in_progress ? | |
| " (switching)" : ""); | |
| if (priv->rx_filter.promiscuous) | |
| seq_puts(seq, "Filter: promisc\n"); | |
| else if (priv->rx_filter.fcs) | |
| seq_puts(seq, "Filter: fcs\n"); | |
| if (priv->rx_filter.bssid) | |
| seq_puts(seq, "Filter: bssid\n"); | |
| if (!priv->disable_beacon_filter) | |
| seq_puts(seq, "Filter: beacons\n"); | |
| if (priv->enable_beacon || | |
| priv->mode == NL80211_IFTYPE_AP || | |
| priv->mode == NL80211_IFTYPE_ADHOC || | |
| priv->mode == NL80211_IFTYPE_MESH_POINT || | |
| priv->mode == NL80211_IFTYPE_P2P_GO) | |
| seq_printf(seq, "Beaconing: %s\n", | |
| priv->enable_beacon ? | |
| "enabled" : "disabled"); | |
| for (i = 0; i < 4; ++i) | |
| seq_printf(seq, "EDCA(%d): %d, %d, %d, %d, %d\n", i, | |
| priv->edca.params[i].cwmin, | |
| priv->edca.params[i].cwmax, | |
| priv->edca.params[i].aifns, | |
| priv->edca.params[i].txop_limit, | |
| priv->edca.params[i].max_rx_lifetime); | |
| if (priv->join_status == CW1200_JOIN_STATUS_STA) { | |
| static const char *pm_mode = "unknown"; | |
| switch (priv->powersave_mode.mode) { | |
| case WSM_PSM_ACTIVE: | |
| pm_mode = "off"; | |
| break; | |
| case WSM_PSM_PS: | |
| pm_mode = "on"; | |
| break; | |
| case WSM_PSM_FAST_PS: | |
| pm_mode = "dynamic"; | |
| break; | |
| } | |
| seq_printf(seq, "Preamble: %s\n", | |
| cw1200_debug_preamble[priv->association_mode.preamble]); | |
| seq_printf(seq, "AMPDU spcn: %d\n", | |
| priv->association_mode.mpdu_start_spacing); | |
| seq_printf(seq, "Basic rate: 0x%.8X\n", | |
| le32_to_cpu(priv->association_mode.basic_rate_set)); | |
| seq_printf(seq, "Bss lost: %d beacons\n", | |
| priv->bss_params.beacon_lost_count); | |
| seq_printf(seq, "AID: %d\n", | |
| priv->bss_params.aid); | |
| seq_printf(seq, "Rates: 0x%.8X\n", | |
| priv->bss_params.operational_rate_set); | |
| seq_printf(seq, "Powersave: %s\n", pm_mode); | |
| } | |
| seq_printf(seq, "HT: %s\n", | |
| cw1200_is_ht(&priv->ht_info) ? "on" : "off"); | |
| if (cw1200_is_ht(&priv->ht_info)) { | |
| seq_printf(seq, "Greenfield: %s\n", | |
| cw1200_ht_greenfield(&priv->ht_info) ? "yes" : "no"); | |
| seq_printf(seq, "AMPDU dens: %d\n", | |
| cw1200_ht_ampdu_density(&priv->ht_info)); | |
| } | |
| seq_printf(seq, "RSSI thold: %d\n", | |
| priv->cqm_rssi_thold); | |
| seq_printf(seq, "RSSI hyst: %d\n", | |
| priv->cqm_rssi_hyst); | |
| seq_printf(seq, "Long retr: %d\n", | |
| priv->long_frame_max_tx_count); | |
| seq_printf(seq, "Short retr: %d\n", | |
| priv->short_frame_max_tx_count); | |
| spin_lock_bh(&priv->tx_policy_cache.lock); | |
| i = 0; | |
| list_for_each(item, &priv->tx_policy_cache.used) | |
| ++i; | |
| spin_unlock_bh(&priv->tx_policy_cache.lock); | |
| seq_printf(seq, "RC in use: %d\n", i); | |
| seq_puts(seq, "\n"); | |
| for (i = 0; i < 4; ++i) { | |
| cw1200_queue_status_show(seq, &priv->tx_queue[i]); | |
| seq_puts(seq, "\n"); | |
| } | |
| cw1200_debug_print_map(seq, priv, "Link map: ", | |
| priv->link_id_map); | |
| cw1200_debug_print_map(seq, priv, "Asleep map: ", | |
| priv->sta_asleep_mask); | |
| cw1200_debug_print_map(seq, priv, "PSPOLL map: ", | |
| priv->pspoll_mask); | |
| seq_puts(seq, "\n"); | |
| for (i = 0; i < CW1200_MAX_STA_IN_AP_MODE; ++i) { | |
| if (priv->link_id_db[i].status) { | |
| seq_printf(seq, "Link %d: %s, %pM\n", | |
| i + 1, | |
| cw1200_debug_link_id[priv->link_id_db[i].status], | |
| priv->link_id_db[i].mac); | |
| } | |
| } | |
| seq_puts(seq, "\n"); | |
| seq_printf(seq, "BH status: %s\n", | |
| atomic_read(&priv->bh_term) ? "terminated" : "alive"); | |
| seq_printf(seq, "Pending RX: %d\n", | |
| atomic_read(&priv->bh_rx)); | |
| seq_printf(seq, "Pending TX: %d\n", | |
| atomic_read(&priv->bh_tx)); | |
| if (priv->bh_error) | |
| seq_printf(seq, "BH errcode: %d\n", | |
| priv->bh_error); | |
| seq_printf(seq, "TX bufs: %d x %d bytes\n", | |
| priv->wsm_caps.input_buffers, | |
| priv->wsm_caps.input_buffer_size); | |
| seq_printf(seq, "Used bufs: %d\n", | |
| priv->hw_bufs_used); | |
| seq_printf(seq, "Powermgmt: %s\n", | |
| priv->powersave_enabled ? "on" : "off"); | |
| seq_printf(seq, "Device: %s\n", | |
| priv->device_can_sleep ? "asleep" : "awake"); | |
| spin_lock(&priv->wsm_cmd.lock); | |
| seq_printf(seq, "WSM status: %s\n", | |
| priv->wsm_cmd.done ? "idle" : "active"); | |
| seq_printf(seq, "WSM cmd: 0x%.4X (%td bytes)\n", | |
| priv->wsm_cmd.cmd, priv->wsm_cmd.len); | |
| seq_printf(seq, "WSM retval: %d\n", | |
| priv->wsm_cmd.ret); | |
| spin_unlock(&priv->wsm_cmd.lock); | |
| seq_printf(seq, "Datapath: %s\n", | |
| atomic_read(&priv->tx_lock) ? "locked" : "unlocked"); | |
| if (atomic_read(&priv->tx_lock)) | |
| seq_printf(seq, "TXlock cnt: %d\n", | |
| atomic_read(&priv->tx_lock)); | |
| seq_printf(seq, "TXed: %d\n", | |
| d->tx); | |
| seq_printf(seq, "AGG TXed: %d\n", | |
| d->tx_agg); | |
| seq_printf(seq, "MULTI TXed: %d (%d)\n", | |
| d->tx_multi, d->tx_multi_frames); | |
| seq_printf(seq, "RXed: %d\n", | |
| d->rx); | |
| seq_printf(seq, "AGG RXed: %d\n", | |
| d->rx_agg); | |
| seq_printf(seq, "TX miss: %d\n", | |
| d->tx_cache_miss); | |
| seq_printf(seq, "TX align: %d\n", | |
| d->tx_align); | |
| seq_printf(seq, "TX burst: %d\n", | |
| d->tx_burst); | |
| seq_printf(seq, "TX TTL: %d\n", | |
| d->tx_ttl); | |
| seq_printf(seq, "Scan: %s\n", | |
| atomic_read(&priv->scan.in_progress) ? "active" : "idle"); | |
| return 0; | |
| } | |
| static int cw1200_status_open(struct inode *inode, struct file *file) | |
| { | |
| return single_open(file, &cw1200_status_show, | |
| inode->i_private); | |
| } | |
| static const struct file_operations fops_status = { | |
| .open = cw1200_status_open, | |
| .read = seq_read, | |
| .llseek = seq_lseek, | |
| .release = single_release, | |
| .owner = THIS_MODULE, | |
| }; | |
| static int cw1200_counters_show(struct seq_file *seq, void *v) | |
| { | |
| int ret; | |
| struct cw1200_common *priv = seq->private; | |
| struct wsm_mib_counters_table counters; | |
| ret = wsm_get_counters_table(priv, &counters); | |
| if (ret) | |
| return ret; | |
| #define PUT_COUNTER(tab, name) \ | |
| seq_printf(seq, "%s:" tab "%d\n", #name, \ | |
| __le32_to_cpu(counters.name)) | |
| PUT_COUNTER("\t\t", plcp_errors); | |
| PUT_COUNTER("\t\t", fcs_errors); | |
| PUT_COUNTER("\t\t", tx_packets); | |
| PUT_COUNTER("\t\t", rx_packets); | |
| PUT_COUNTER("\t\t", rx_packet_errors); | |
| PUT_COUNTER("\t", rx_decryption_failures); | |
| PUT_COUNTER("\t\t", rx_mic_failures); | |
| PUT_COUNTER("\t", rx_no_key_failures); | |
| PUT_COUNTER("\t", tx_multicast_frames); | |
| PUT_COUNTER("\t", tx_frames_success); | |
| PUT_COUNTER("\t", tx_frame_failures); | |
| PUT_COUNTER("\t", tx_frames_retried); | |
| PUT_COUNTER("\t", tx_frames_multi_retried); | |
| PUT_COUNTER("\t", rx_frame_duplicates); | |
| PUT_COUNTER("\t\t", rts_success); | |
| PUT_COUNTER("\t\t", rts_failures); | |
| PUT_COUNTER("\t\t", ack_failures); | |
| PUT_COUNTER("\t", rx_multicast_frames); | |
| PUT_COUNTER("\t", rx_frames_success); | |
| PUT_COUNTER("\t", rx_cmac_icv_errors); | |
| PUT_COUNTER("\t\t", rx_cmac_replays); | |
| PUT_COUNTER("\t", rx_mgmt_ccmp_replays); | |
| #undef PUT_COUNTER | |
| return 0; | |
| } | |
| static int cw1200_counters_open(struct inode *inode, struct file *file) | |
| { | |
| return single_open(file, &cw1200_counters_show, | |
| inode->i_private); | |
| } | |
| static const struct file_operations fops_counters = { | |
| .open = cw1200_counters_open, | |
| .read = seq_read, | |
| .llseek = seq_lseek, | |
| .release = single_release, | |
| .owner = THIS_MODULE, | |
| }; | |
| static ssize_t cw1200_wsm_dumps(struct file *file, | |
| const char __user *user_buf, size_t count, loff_t *ppos) | |
| { | |
| struct cw1200_common *priv = file->private_data; | |
| char buf[1]; | |
| if (!count) | |
| return -EINVAL; | |
| if (copy_from_user(buf, user_buf, 1)) | |
| return -EFAULT; | |
| if (buf[0] == '1') | |
| priv->wsm_enable_wsm_dumps = 1; | |
| else | |
| priv->wsm_enable_wsm_dumps = 0; | |
| return count; | |
| } | |
| static const struct file_operations fops_wsm_dumps = { | |
| .open = simple_open, | |
| .write = cw1200_wsm_dumps, | |
| .llseek = default_llseek, | |
| }; | |
| int cw1200_debug_init(struct cw1200_common *priv) | |
| { | |
| int ret = -ENOMEM; | |
| struct cw1200_debug_priv *d = kzalloc(sizeof(struct cw1200_debug_priv), | |
| GFP_KERNEL); | |
| priv->debug = d; | |
| if (!d) | |
| return ret; | |
| d->debugfs_phy = debugfs_create_dir("cw1200", | |
| priv->hw->wiphy->debugfsdir); | |
| if (!d->debugfs_phy) | |
| goto err; | |
| if (!debugfs_create_file("status", S_IRUSR, d->debugfs_phy, | |
| priv, &fops_status)) | |
| goto err; | |
| if (!debugfs_create_file("counters", S_IRUSR, d->debugfs_phy, | |
| priv, &fops_counters)) | |
| goto err; | |
| if (!debugfs_create_file("wsm_dumps", S_IWUSR, d->debugfs_phy, | |
| priv, &fops_wsm_dumps)) | |
| goto err; | |
| return 0; | |
| err: | |
| priv->debug = NULL; | |
| debugfs_remove_recursive(d->debugfs_phy); | |
| kfree(d); | |
| return ret; | |
| } | |
| void cw1200_debug_release(struct cw1200_common *priv) | |
| { | |
| struct cw1200_debug_priv *d = priv->debug; | |
| if (d) { | |
| debugfs_remove_recursive(d->debugfs_phy); | |
| priv->debug = NULL; | |
| kfree(d); | |
| } | |
| } |