| /* | |
| * Mac80211 STA API for ST-Ericsson CW1200 drivers | |
| * | |
| * Copyright (c) 2010, ST-Ericsson | |
| * Author: Dmitry Tarnyagin <dmitry.tarnyagin@lockless.no> | |
| * | |
| * This program is free software; you can redistribute it and/or modify | |
| * it under the terms of the GNU General Public License version 2 as | |
| * published by the Free Software Foundation. | |
| */ | |
| #include <linux/vmalloc.h> | |
| #include <linux/sched.h> | |
| #include <linux/firmware.h> | |
| #include <linux/module.h> | |
| #include <linux/etherdevice.h> | |
| #include "cw1200.h" | |
| #include "sta.h" | |
| #include "fwio.h" | |
| #include "bh.h" | |
| #include "debug.h" | |
| #ifndef ERP_INFO_BYTE_OFFSET | |
| #define ERP_INFO_BYTE_OFFSET 2 | |
| #endif | |
| static void cw1200_do_join(struct cw1200_common *priv); | |
| static void cw1200_do_unjoin(struct cw1200_common *priv); | |
| static int cw1200_upload_beacon(struct cw1200_common *priv); | |
| static int cw1200_upload_pspoll(struct cw1200_common *priv); | |
| static int cw1200_upload_null(struct cw1200_common *priv); | |
| static int cw1200_upload_qosnull(struct cw1200_common *priv); | |
| static int cw1200_start_ap(struct cw1200_common *priv); | |
| static int cw1200_update_beaconing(struct cw1200_common *priv); | |
| static int cw1200_enable_beaconing(struct cw1200_common *priv, | |
| bool enable); | |
| static void __cw1200_sta_notify(struct ieee80211_hw *dev, | |
| struct ieee80211_vif *vif, | |
| enum sta_notify_cmd notify_cmd, | |
| int link_id); | |
| static int __cw1200_flush(struct cw1200_common *priv, bool drop); | |
| static inline void __cw1200_free_event_queue(struct list_head *list) | |
| { | |
| struct cw1200_wsm_event *event, *tmp; | |
| list_for_each_entry_safe(event, tmp, list, link) { | |
| list_del(&event->link); | |
| kfree(event); | |
| } | |
| } | |
| /* ******************************************************************** */ | |
| /* STA API */ | |
| int cw1200_start(struct ieee80211_hw *dev) | |
| { | |
| struct cw1200_common *priv = dev->priv; | |
| int ret = 0; | |
| cw1200_pm_stay_awake(&priv->pm_state, HZ); | |
| mutex_lock(&priv->conf_mutex); | |
| /* default EDCA */ | |
| WSM_EDCA_SET(&priv->edca, 0, 0x0002, 0x0003, 0x0007, 47, 0xc8, false); | |
| WSM_EDCA_SET(&priv->edca, 1, 0x0002, 0x0007, 0x000f, 94, 0xc8, false); | |
| WSM_EDCA_SET(&priv->edca, 2, 0x0003, 0x000f, 0x03ff, 0, 0xc8, false); | |
| WSM_EDCA_SET(&priv->edca, 3, 0x0007, 0x000f, 0x03ff, 0, 0xc8, false); | |
| ret = wsm_set_edca_params(priv, &priv->edca); | |
| if (ret) | |
| goto out; | |
| ret = cw1200_set_uapsd_param(priv, &priv->edca); | |
| if (ret) | |
| goto out; | |
| priv->setbssparams_done = false; | |
| memcpy(priv->mac_addr, dev->wiphy->perm_addr, ETH_ALEN); | |
| priv->mode = NL80211_IFTYPE_MONITOR; | |
| priv->wep_default_key_id = -1; | |
| priv->cqm_beacon_loss_count = 10; | |
| ret = cw1200_setup_mac(priv); | |
| if (ret) | |
| goto out; | |
| out: | |
| mutex_unlock(&priv->conf_mutex); | |
| return ret; | |
| } | |
| void cw1200_stop(struct ieee80211_hw *dev) | |
| { | |
| struct cw1200_common *priv = dev->priv; | |
| LIST_HEAD(list); | |
| int i; | |
| wsm_lock_tx(priv); | |
| while (down_trylock(&priv->scan.lock)) { | |
| /* Scan is in progress. Force it to stop. */ | |
| priv->scan.req = NULL; | |
| schedule(); | |
| } | |
| up(&priv->scan.lock); | |
| cancel_delayed_work_sync(&priv->scan.probe_work); | |
| cancel_delayed_work_sync(&priv->scan.timeout); | |
| cancel_delayed_work_sync(&priv->clear_recent_scan_work); | |
| cancel_delayed_work_sync(&priv->join_timeout); | |
| cw1200_cqm_bssloss_sm(priv, 0, 0, 0); | |
| cancel_work_sync(&priv->unjoin_work); | |
| cancel_delayed_work_sync(&priv->link_id_gc_work); | |
| flush_workqueue(priv->workqueue); | |
| del_timer_sync(&priv->mcast_timeout); | |
| mutex_lock(&priv->conf_mutex); | |
| priv->mode = NL80211_IFTYPE_UNSPECIFIED; | |
| priv->listening = false; | |
| spin_lock(&priv->event_queue_lock); | |
| list_splice_init(&priv->event_queue, &list); | |
| spin_unlock(&priv->event_queue_lock); | |
| __cw1200_free_event_queue(&list); | |
| priv->join_status = CW1200_JOIN_STATUS_PASSIVE; | |
| priv->join_pending = false; | |
| for (i = 0; i < 4; i++) | |
| cw1200_queue_clear(&priv->tx_queue[i]); | |
| mutex_unlock(&priv->conf_mutex); | |
| tx_policy_clean(priv); | |
| /* HACK! */ | |
| if (atomic_xchg(&priv->tx_lock, 1) != 1) | |
| pr_debug("[STA] TX is force-unlocked due to stop request.\n"); | |
| wsm_unlock_tx(priv); | |
| atomic_xchg(&priv->tx_lock, 0); /* for recovery to work */ | |
| } | |
| static int cw1200_bssloss_mitigation = 1; | |
| module_param(cw1200_bssloss_mitigation, int, 0644); | |
| MODULE_PARM_DESC(cw1200_bssloss_mitigation, "BSS Loss mitigation. 0 == disabled, 1 == enabled (default)"); | |
| void __cw1200_cqm_bssloss_sm(struct cw1200_common *priv, | |
| int init, int good, int bad) | |
| { | |
| int tx = 0; | |
| priv->delayed_link_loss = 0; | |
| cancel_work_sync(&priv->bss_params_work); | |
| pr_debug("[STA] CQM BSSLOSS_SM: state: %d init %d good %d bad: %d txlock: %d uj: %d\n", | |
| priv->bss_loss_state, | |
| init, good, bad, | |
| atomic_read(&priv->tx_lock), | |
| priv->delayed_unjoin); | |
| /* If we have a pending unjoin */ | |
| if (priv->delayed_unjoin) | |
| return; | |
| if (init) { | |
| queue_delayed_work(priv->workqueue, | |
| &priv->bss_loss_work, | |
| HZ); | |
| priv->bss_loss_state = 0; | |
| /* Skip the confimration procedure in P2P case */ | |
| if (!priv->vif->p2p && !atomic_read(&priv->tx_lock)) | |
| tx = 1; | |
| } else if (good) { | |
| cancel_delayed_work_sync(&priv->bss_loss_work); | |
| priv->bss_loss_state = 0; | |
| queue_work(priv->workqueue, &priv->bss_params_work); | |
| } else if (bad) { | |
| /* XXX Should we just keep going until we time out? */ | |
| if (priv->bss_loss_state < 3) | |
| tx = 1; | |
| } else { | |
| cancel_delayed_work_sync(&priv->bss_loss_work); | |
| priv->bss_loss_state = 0; | |
| } | |
| /* Bypass mitigation if it's disabled */ | |
| if (!cw1200_bssloss_mitigation) | |
| tx = 0; | |
| /* Spit out a NULL packet to our AP if necessary */ | |
| if (tx) { | |
| struct sk_buff *skb; | |
| priv->bss_loss_state++; | |
| skb = ieee80211_nullfunc_get(priv->hw, priv->vif); | |
| WARN_ON(!skb); | |
| if (skb) | |
| cw1200_tx(priv->hw, NULL, skb); | |
| } | |
| } | |
| int cw1200_add_interface(struct ieee80211_hw *dev, | |
| struct ieee80211_vif *vif) | |
| { | |
| int ret; | |
| struct cw1200_common *priv = dev->priv; | |
| /* __le32 auto_calibration_mode = __cpu_to_le32(1); */ | |
| vif->driver_flags |= IEEE80211_VIF_BEACON_FILTER | | |
| IEEE80211_VIF_SUPPORTS_UAPSD | | |
| IEEE80211_VIF_SUPPORTS_CQM_RSSI; | |
| mutex_lock(&priv->conf_mutex); | |
| if (priv->mode != NL80211_IFTYPE_MONITOR) { | |
| mutex_unlock(&priv->conf_mutex); | |
| return -EOPNOTSUPP; | |
| } | |
| switch (vif->type) { | |
| case NL80211_IFTYPE_STATION: | |
| case NL80211_IFTYPE_ADHOC: | |
| case NL80211_IFTYPE_MESH_POINT: | |
| case NL80211_IFTYPE_AP: | |
| priv->mode = vif->type; | |
| break; | |
| default: | |
| mutex_unlock(&priv->conf_mutex); | |
| return -EOPNOTSUPP; | |
| } | |
| priv->vif = vif; | |
| memcpy(priv->mac_addr, vif->addr, ETH_ALEN); | |
| ret = cw1200_setup_mac(priv); | |
| /* Enable auto-calibration */ | |
| /* Exception in subsequent channel switch; disabled. | |
| * wsm_write_mib(priv, WSM_MIB_ID_SET_AUTO_CALIBRATION_MODE, | |
| * &auto_calibration_mode, sizeof(auto_calibration_mode)); | |
| */ | |
| mutex_unlock(&priv->conf_mutex); | |
| return ret; | |
| } | |
| void cw1200_remove_interface(struct ieee80211_hw *dev, | |
| struct ieee80211_vif *vif) | |
| { | |
| struct cw1200_common *priv = dev->priv; | |
| struct wsm_reset reset = { | |
| .reset_statistics = true, | |
| }; | |
| int i; | |
| mutex_lock(&priv->conf_mutex); | |
| switch (priv->join_status) { | |
| case CW1200_JOIN_STATUS_JOINING: | |
| case CW1200_JOIN_STATUS_PRE_STA: | |
| case CW1200_JOIN_STATUS_STA: | |
| case CW1200_JOIN_STATUS_IBSS: | |
| wsm_lock_tx(priv); | |
| if (queue_work(priv->workqueue, &priv->unjoin_work) <= 0) | |
| wsm_unlock_tx(priv); | |
| break; | |
| case CW1200_JOIN_STATUS_AP: | |
| for (i = 0; priv->link_id_map; ++i) { | |
| if (priv->link_id_map & BIT(i)) { | |
| reset.link_id = i; | |
| wsm_reset(priv, &reset); | |
| priv->link_id_map &= ~BIT(i); | |
| } | |
| } | |
| memset(priv->link_id_db, 0, sizeof(priv->link_id_db)); | |
| priv->sta_asleep_mask = 0; | |
| priv->enable_beacon = false; | |
| priv->tx_multicast = false; | |
| priv->aid0_bit_set = false; | |
| priv->buffered_multicasts = false; | |
| priv->pspoll_mask = 0; | |
| reset.link_id = 0; | |
| wsm_reset(priv, &reset); | |
| break; | |
| case CW1200_JOIN_STATUS_MONITOR: | |
| cw1200_update_listening(priv, false); | |
| break; | |
| default: | |
| break; | |
| } | |
| priv->vif = NULL; | |
| priv->mode = NL80211_IFTYPE_MONITOR; | |
| eth_zero_addr(priv->mac_addr); | |
| memset(&priv->p2p_ps_modeinfo, 0, sizeof(priv->p2p_ps_modeinfo)); | |
| cw1200_free_keys(priv); | |
| cw1200_setup_mac(priv); | |
| priv->listening = false; | |
| priv->join_status = CW1200_JOIN_STATUS_PASSIVE; | |
| if (!__cw1200_flush(priv, true)) | |
| wsm_unlock_tx(priv); | |
| mutex_unlock(&priv->conf_mutex); | |
| } | |
| int cw1200_change_interface(struct ieee80211_hw *dev, | |
| struct ieee80211_vif *vif, | |
| enum nl80211_iftype new_type, | |
| bool p2p) | |
| { | |
| int ret = 0; | |
| pr_debug("change_interface new: %d (%d), old: %d (%d)\n", new_type, | |
| p2p, vif->type, vif->p2p); | |
| if (new_type != vif->type || vif->p2p != p2p) { | |
| cw1200_remove_interface(dev, vif); | |
| vif->type = new_type; | |
| vif->p2p = p2p; | |
| ret = cw1200_add_interface(dev, vif); | |
| } | |
| return ret; | |
| } | |
| int cw1200_config(struct ieee80211_hw *dev, u32 changed) | |
| { | |
| int ret = 0; | |
| struct cw1200_common *priv = dev->priv; | |
| struct ieee80211_conf *conf = &dev->conf; | |
| pr_debug("CONFIG CHANGED: %08x\n", changed); | |
| down(&priv->scan.lock); | |
| mutex_lock(&priv->conf_mutex); | |
| /* TODO: IEEE80211_CONF_CHANGE_QOS */ | |
| /* TODO: IEEE80211_CONF_CHANGE_LISTEN_INTERVAL */ | |
| if (changed & IEEE80211_CONF_CHANGE_POWER) { | |
| priv->output_power = conf->power_level; | |
| pr_debug("[STA] TX power: %d\n", priv->output_power); | |
| wsm_set_output_power(priv, priv->output_power * 10); | |
| } | |
| if ((changed & IEEE80211_CONF_CHANGE_CHANNEL) && | |
| (priv->channel != conf->chandef.chan)) { | |
| struct ieee80211_channel *ch = conf->chandef.chan; | |
| struct wsm_switch_channel channel = { | |
| .channel_number = ch->hw_value, | |
| }; | |
| pr_debug("[STA] Freq %d (wsm ch: %d).\n", | |
| ch->center_freq, ch->hw_value); | |
| /* __cw1200_flush() implicitly locks tx, if successful */ | |
| if (!__cw1200_flush(priv, false)) { | |
| if (!wsm_switch_channel(priv, &channel)) { | |
| ret = wait_event_timeout(priv->channel_switch_done, | |
| !priv->channel_switch_in_progress, | |
| 3 * HZ); | |
| if (ret) { | |
| /* Already unlocks if successful */ | |
| priv->channel = ch; | |
| ret = 0; | |
| } else { | |
| ret = -ETIMEDOUT; | |
| } | |
| } else { | |
| /* Unlock if switch channel fails */ | |
| wsm_unlock_tx(priv); | |
| } | |
| } | |
| } | |
| if (changed & IEEE80211_CONF_CHANGE_PS) { | |
| if (!(conf->flags & IEEE80211_CONF_PS)) | |
| priv->powersave_mode.mode = WSM_PSM_ACTIVE; | |
| else if (conf->dynamic_ps_timeout <= 0) | |
| priv->powersave_mode.mode = WSM_PSM_PS; | |
| else | |
| priv->powersave_mode.mode = WSM_PSM_FAST_PS; | |
| /* Firmware requires that value for this 1-byte field must | |
| * be specified in units of 500us. Values above the 128ms | |
| * threshold are not supported. | |
| */ | |
| if (conf->dynamic_ps_timeout >= 0x80) | |
| priv->powersave_mode.fast_psm_idle_period = 0xFF; | |
| else | |
| priv->powersave_mode.fast_psm_idle_period = | |
| conf->dynamic_ps_timeout << 1; | |
| if (priv->join_status == CW1200_JOIN_STATUS_STA && | |
| priv->bss_params.aid) | |
| cw1200_set_pm(priv, &priv->powersave_mode); | |
| } | |
| if (changed & IEEE80211_CONF_CHANGE_MONITOR) { | |
| /* TBD: It looks like it's transparent | |
| * there's a monitor interface present -- use this | |
| * to determine for example whether to calculate | |
| * timestamps for packets or not, do not use instead | |
| * of filter flags! | |
| */ | |
| } | |
| if (changed & IEEE80211_CONF_CHANGE_IDLE) { | |
| struct wsm_operational_mode mode = { | |
| .power_mode = cw1200_power_mode, | |
| .disable_more_flag_usage = true, | |
| }; | |
| wsm_lock_tx(priv); | |
| /* Disable p2p-dev mode forced by TX request */ | |
| if ((priv->join_status == CW1200_JOIN_STATUS_MONITOR) && | |
| (conf->flags & IEEE80211_CONF_IDLE) && | |
| !priv->listening) { | |
| cw1200_disable_listening(priv); | |
| priv->join_status = CW1200_JOIN_STATUS_PASSIVE; | |
| } | |
| wsm_set_operational_mode(priv, &mode); | |
| wsm_unlock_tx(priv); | |
| } | |
| if (changed & IEEE80211_CONF_CHANGE_RETRY_LIMITS) { | |
| pr_debug("[STA] Retry limits: %d (long), %d (short).\n", | |
| conf->long_frame_max_tx_count, | |
| conf->short_frame_max_tx_count); | |
| spin_lock_bh(&priv->tx_policy_cache.lock); | |
| priv->long_frame_max_tx_count = conf->long_frame_max_tx_count; | |
| priv->short_frame_max_tx_count = | |
| (conf->short_frame_max_tx_count < 0x0F) ? | |
| conf->short_frame_max_tx_count : 0x0F; | |
| priv->hw->max_rate_tries = priv->short_frame_max_tx_count; | |
| spin_unlock_bh(&priv->tx_policy_cache.lock); | |
| } | |
| mutex_unlock(&priv->conf_mutex); | |
| up(&priv->scan.lock); | |
| return ret; | |
| } | |
| void cw1200_update_filtering(struct cw1200_common *priv) | |
| { | |
| int ret; | |
| bool bssid_filtering = !priv->rx_filter.bssid; | |
| bool is_p2p = priv->vif && priv->vif->p2p; | |
| bool is_sta = priv->vif && NL80211_IFTYPE_STATION == priv->vif->type; | |
| static struct wsm_beacon_filter_control bf_ctrl; | |
| static struct wsm_mib_beacon_filter_table bf_tbl = { | |
| .entry[0].ie_id = WLAN_EID_VENDOR_SPECIFIC, | |
| .entry[0].flags = WSM_BEACON_FILTER_IE_HAS_CHANGED | | |
| WSM_BEACON_FILTER_IE_NO_LONGER_PRESENT | | |
| WSM_BEACON_FILTER_IE_HAS_APPEARED, | |
| .entry[0].oui[0] = 0x50, | |
| .entry[0].oui[1] = 0x6F, | |
| .entry[0].oui[2] = 0x9A, | |
| .entry[1].ie_id = WLAN_EID_HT_OPERATION, | |
| .entry[1].flags = WSM_BEACON_FILTER_IE_HAS_CHANGED | | |
| WSM_BEACON_FILTER_IE_NO_LONGER_PRESENT | | |
| WSM_BEACON_FILTER_IE_HAS_APPEARED, | |
| .entry[2].ie_id = WLAN_EID_ERP_INFO, | |
| .entry[2].flags = WSM_BEACON_FILTER_IE_HAS_CHANGED | | |
| WSM_BEACON_FILTER_IE_NO_LONGER_PRESENT | | |
| WSM_BEACON_FILTER_IE_HAS_APPEARED, | |
| }; | |
| if (priv->join_status == CW1200_JOIN_STATUS_PASSIVE) | |
| return; | |
| else if (priv->join_status == CW1200_JOIN_STATUS_MONITOR) | |
| bssid_filtering = false; | |
| if (priv->disable_beacon_filter) { | |
| bf_ctrl.enabled = 0; | |
| bf_ctrl.bcn_count = 1; | |
| bf_tbl.num = __cpu_to_le32(0); | |
| } else if (is_p2p || !is_sta) { | |
| bf_ctrl.enabled = WSM_BEACON_FILTER_ENABLE | | |
| WSM_BEACON_FILTER_AUTO_ERP; | |
| bf_ctrl.bcn_count = 0; | |
| bf_tbl.num = __cpu_to_le32(2); | |
| } else { | |
| bf_ctrl.enabled = WSM_BEACON_FILTER_ENABLE; | |
| bf_ctrl.bcn_count = 0; | |
| bf_tbl.num = __cpu_to_le32(3); | |
| } | |
| /* When acting as p2p client being connected to p2p GO, in order to | |
| * receive frames from a different p2p device, turn off bssid filter. | |
| * | |
| * WARNING: FW dependency! | |
| * This can only be used with FW WSM371 and its successors. | |
| * In that FW version even with bssid filter turned off, | |
| * device will block most of the unwanted frames. | |
| */ | |
| if (is_p2p) | |
| bssid_filtering = false; | |
| ret = wsm_set_rx_filter(priv, &priv->rx_filter); | |
| if (!ret) | |
| ret = wsm_set_beacon_filter_table(priv, &bf_tbl); | |
| if (!ret) | |
| ret = wsm_beacon_filter_control(priv, &bf_ctrl); | |
| if (!ret) | |
| ret = wsm_set_bssid_filtering(priv, bssid_filtering); | |
| if (!ret) | |
| ret = wsm_set_multicast_filter(priv, &priv->multicast_filter); | |
| if (ret) | |
| wiphy_err(priv->hw->wiphy, | |
| "Update filtering failed: %d.\n", ret); | |
| return; | |
| } | |
| void cw1200_update_filtering_work(struct work_struct *work) | |
| { | |
| struct cw1200_common *priv = | |
| container_of(work, struct cw1200_common, | |
| update_filtering_work); | |
| cw1200_update_filtering(priv); | |
| } | |
| void cw1200_set_beacon_wakeup_period_work(struct work_struct *work) | |
| { | |
| struct cw1200_common *priv = | |
| container_of(work, struct cw1200_common, | |
| set_beacon_wakeup_period_work); | |
| wsm_set_beacon_wakeup_period(priv, | |
| priv->beacon_int * priv->join_dtim_period > | |
| MAX_BEACON_SKIP_TIME_MS ? 1 : | |
| priv->join_dtim_period, 0); | |
| } | |
| u64 cw1200_prepare_multicast(struct ieee80211_hw *hw, | |
| struct netdev_hw_addr_list *mc_list) | |
| { | |
| static u8 broadcast_ipv6[ETH_ALEN] = { | |
| 0x33, 0x33, 0x00, 0x00, 0x00, 0x01 | |
| }; | |
| static u8 broadcast_ipv4[ETH_ALEN] = { | |
| 0x01, 0x00, 0x5e, 0x00, 0x00, 0x01 | |
| }; | |
| struct cw1200_common *priv = hw->priv; | |
| struct netdev_hw_addr *ha; | |
| int count = 0; | |
| /* Disable multicast filtering */ | |
| priv->has_multicast_subscription = false; | |
| memset(&priv->multicast_filter, 0x00, sizeof(priv->multicast_filter)); | |
| if (netdev_hw_addr_list_count(mc_list) > WSM_MAX_GRP_ADDRTABLE_ENTRIES) | |
| return 0; | |
| /* Enable if requested */ | |
| netdev_hw_addr_list_for_each(ha, mc_list) { | |
| pr_debug("[STA] multicast: %pM\n", ha->addr); | |
| memcpy(&priv->multicast_filter.macaddrs[count], | |
| ha->addr, ETH_ALEN); | |
| if (!ether_addr_equal(ha->addr, broadcast_ipv4) && | |
| !ether_addr_equal(ha->addr, broadcast_ipv6)) | |
| priv->has_multicast_subscription = true; | |
| count++; | |
| } | |
| if (count) { | |
| priv->multicast_filter.enable = __cpu_to_le32(1); | |
| priv->multicast_filter.num_addrs = __cpu_to_le32(count); | |
| } | |
| return netdev_hw_addr_list_count(mc_list); | |
| } | |
| void cw1200_configure_filter(struct ieee80211_hw *dev, | |
| unsigned int changed_flags, | |
| unsigned int *total_flags, | |
| u64 multicast) | |
| { | |
| struct cw1200_common *priv = dev->priv; | |
| bool listening = !!(*total_flags & | |
| (FIF_OTHER_BSS | | |
| FIF_BCN_PRBRESP_PROMISC | | |
| FIF_PROBE_REQ)); | |
| *total_flags &= FIF_OTHER_BSS | | |
| FIF_FCSFAIL | | |
| FIF_BCN_PRBRESP_PROMISC | | |
| FIF_PROBE_REQ; | |
| down(&priv->scan.lock); | |
| mutex_lock(&priv->conf_mutex); | |
| priv->rx_filter.promiscuous = 0; | |
| priv->rx_filter.bssid = (*total_flags & (FIF_OTHER_BSS | | |
| FIF_PROBE_REQ)) ? 1 : 0; | |
| priv->rx_filter.fcs = (*total_flags & FIF_FCSFAIL) ? 1 : 0; | |
| priv->disable_beacon_filter = !(*total_flags & | |
| (FIF_BCN_PRBRESP_PROMISC | | |
| FIF_PROBE_REQ)); | |
| if (priv->listening != listening) { | |
| priv->listening = listening; | |
| wsm_lock_tx(priv); | |
| cw1200_update_listening(priv, listening); | |
| wsm_unlock_tx(priv); | |
| } | |
| cw1200_update_filtering(priv); | |
| mutex_unlock(&priv->conf_mutex); | |
| up(&priv->scan.lock); | |
| } | |
| int cw1200_conf_tx(struct ieee80211_hw *dev, struct ieee80211_vif *vif, | |
| u16 queue, const struct ieee80211_tx_queue_params *params) | |
| { | |
| struct cw1200_common *priv = dev->priv; | |
| int ret = 0; | |
| /* To prevent re-applying PM request OID again and again*/ | |
| bool old_uapsd_flags; | |
| mutex_lock(&priv->conf_mutex); | |
| if (queue < dev->queues) { | |
| old_uapsd_flags = le16_to_cpu(priv->uapsd_info.uapsd_flags); | |
| WSM_TX_QUEUE_SET(&priv->tx_queue_params, queue, 0, 0, 0); | |
| ret = wsm_set_tx_queue_params(priv, | |
| &priv->tx_queue_params.params[queue], queue); | |
| if (ret) { | |
| ret = -EINVAL; | |
| goto out; | |
| } | |
| WSM_EDCA_SET(&priv->edca, queue, params->aifs, | |
| params->cw_min, params->cw_max, | |
| params->txop, 0xc8, | |
| params->uapsd); | |
| ret = wsm_set_edca_params(priv, &priv->edca); | |
| if (ret) { | |
| ret = -EINVAL; | |
| goto out; | |
| } | |
| if (priv->mode == NL80211_IFTYPE_STATION) { | |
| ret = cw1200_set_uapsd_param(priv, &priv->edca); | |
| if (!ret && priv->setbssparams_done && | |
| (priv->join_status == CW1200_JOIN_STATUS_STA) && | |
| (old_uapsd_flags != le16_to_cpu(priv->uapsd_info.uapsd_flags))) | |
| ret = cw1200_set_pm(priv, &priv->powersave_mode); | |
| } | |
| } else { | |
| ret = -EINVAL; | |
| } | |
| out: | |
| mutex_unlock(&priv->conf_mutex); | |
| return ret; | |
| } | |
| int cw1200_get_stats(struct ieee80211_hw *dev, | |
| struct ieee80211_low_level_stats *stats) | |
| { | |
| struct cw1200_common *priv = dev->priv; | |
| memcpy(stats, &priv->stats, sizeof(*stats)); | |
| return 0; | |
| } | |
| int cw1200_set_pm(struct cw1200_common *priv, const struct wsm_set_pm *arg) | |
| { | |
| struct wsm_set_pm pm = *arg; | |
| if (priv->uapsd_info.uapsd_flags != 0) | |
| pm.mode &= ~WSM_PSM_FAST_PS_FLAG; | |
| if (memcmp(&pm, &priv->firmware_ps_mode, | |
| sizeof(struct wsm_set_pm))) { | |
| priv->firmware_ps_mode = pm; | |
| return wsm_set_pm(priv, &pm); | |
| } else { | |
| return 0; | |
| } | |
| } | |
| int cw1200_set_key(struct ieee80211_hw *dev, enum set_key_cmd cmd, | |
| struct ieee80211_vif *vif, struct ieee80211_sta *sta, | |
| struct ieee80211_key_conf *key) | |
| { | |
| int ret = -EOPNOTSUPP; | |
| struct cw1200_common *priv = dev->priv; | |
| struct ieee80211_key_seq seq; | |
| mutex_lock(&priv->conf_mutex); | |
| if (cmd == SET_KEY) { | |
| u8 *peer_addr = NULL; | |
| int pairwise = (key->flags & IEEE80211_KEY_FLAG_PAIRWISE) ? | |
| 1 : 0; | |
| int idx = cw1200_alloc_key(priv); | |
| struct wsm_add_key *wsm_key = &priv->keys[idx]; | |
| if (idx < 0) { | |
| ret = -EINVAL; | |
| goto finally; | |
| } | |
| if (sta) | |
| peer_addr = sta->addr; | |
| key->flags |= IEEE80211_KEY_FLAG_PUT_IV_SPACE | | |
| IEEE80211_KEY_FLAG_RESERVE_TAILROOM; | |
| switch (key->cipher) { | |
| case WLAN_CIPHER_SUITE_WEP40: | |
| case WLAN_CIPHER_SUITE_WEP104: | |
| if (key->keylen > 16) { | |
| cw1200_free_key(priv, idx); | |
| ret = -EINVAL; | |
| goto finally; | |
| } | |
| if (pairwise) { | |
| wsm_key->type = WSM_KEY_TYPE_WEP_PAIRWISE; | |
| memcpy(wsm_key->wep_pairwise.peer, | |
| peer_addr, ETH_ALEN); | |
| memcpy(wsm_key->wep_pairwise.keydata, | |
| &key->key[0], key->keylen); | |
| wsm_key->wep_pairwise.keylen = key->keylen; | |
| } else { | |
| wsm_key->type = WSM_KEY_TYPE_WEP_DEFAULT; | |
| memcpy(wsm_key->wep_group.keydata, | |
| &key->key[0], key->keylen); | |
| wsm_key->wep_group.keylen = key->keylen; | |
| wsm_key->wep_group.keyid = key->keyidx; | |
| } | |
| break; | |
| case WLAN_CIPHER_SUITE_TKIP: | |
| ieee80211_get_key_rx_seq(key, 0, &seq); | |
| if (pairwise) { | |
| wsm_key->type = WSM_KEY_TYPE_TKIP_PAIRWISE; | |
| memcpy(wsm_key->tkip_pairwise.peer, | |
| peer_addr, ETH_ALEN); | |
| memcpy(wsm_key->tkip_pairwise.keydata, | |
| &key->key[0], 16); | |
| memcpy(wsm_key->tkip_pairwise.tx_mic_key, | |
| &key->key[16], 8); | |
| memcpy(wsm_key->tkip_pairwise.rx_mic_key, | |
| &key->key[24], 8); | |
| } else { | |
| size_t mic_offset = | |
| (priv->mode == NL80211_IFTYPE_AP) ? | |
| 16 : 24; | |
| wsm_key->type = WSM_KEY_TYPE_TKIP_GROUP; | |
| memcpy(wsm_key->tkip_group.keydata, | |
| &key->key[0], 16); | |
| memcpy(wsm_key->tkip_group.rx_mic_key, | |
| &key->key[mic_offset], 8); | |
| wsm_key->tkip_group.rx_seqnum[0] = seq.tkip.iv16 & 0xff; | |
| wsm_key->tkip_group.rx_seqnum[1] = (seq.tkip.iv16 >> 8) & 0xff; | |
| wsm_key->tkip_group.rx_seqnum[2] = seq.tkip.iv32 & 0xff; | |
| wsm_key->tkip_group.rx_seqnum[3] = (seq.tkip.iv32 >> 8) & 0xff; | |
| wsm_key->tkip_group.rx_seqnum[4] = (seq.tkip.iv32 >> 16) & 0xff; | |
| wsm_key->tkip_group.rx_seqnum[5] = (seq.tkip.iv32 >> 24) & 0xff; | |
| wsm_key->tkip_group.rx_seqnum[6] = 0; | |
| wsm_key->tkip_group.rx_seqnum[7] = 0; | |
| wsm_key->tkip_group.keyid = key->keyidx; | |
| } | |
| break; | |
| case WLAN_CIPHER_SUITE_CCMP: | |
| ieee80211_get_key_rx_seq(key, 0, &seq); | |
| if (pairwise) { | |
| wsm_key->type = WSM_KEY_TYPE_AES_PAIRWISE; | |
| memcpy(wsm_key->aes_pairwise.peer, | |
| peer_addr, ETH_ALEN); | |
| memcpy(wsm_key->aes_pairwise.keydata, | |
| &key->key[0], 16); | |
| } else { | |
| wsm_key->type = WSM_KEY_TYPE_AES_GROUP; | |
| memcpy(wsm_key->aes_group.keydata, | |
| &key->key[0], 16); | |
| wsm_key->aes_group.rx_seqnum[0] = seq.ccmp.pn[5]; | |
| wsm_key->aes_group.rx_seqnum[1] = seq.ccmp.pn[4]; | |
| wsm_key->aes_group.rx_seqnum[2] = seq.ccmp.pn[3]; | |
| wsm_key->aes_group.rx_seqnum[3] = seq.ccmp.pn[2]; | |
| wsm_key->aes_group.rx_seqnum[4] = seq.ccmp.pn[1]; | |
| wsm_key->aes_group.rx_seqnum[5] = seq.ccmp.pn[0]; | |
| wsm_key->aes_group.rx_seqnum[6] = 0; | |
| wsm_key->aes_group.rx_seqnum[7] = 0; | |
| wsm_key->aes_group.keyid = key->keyidx; | |
| } | |
| break; | |
| case WLAN_CIPHER_SUITE_SMS4: | |
| if (pairwise) { | |
| wsm_key->type = WSM_KEY_TYPE_WAPI_PAIRWISE; | |
| memcpy(wsm_key->wapi_pairwise.peer, | |
| peer_addr, ETH_ALEN); | |
| memcpy(wsm_key->wapi_pairwise.keydata, | |
| &key->key[0], 16); | |
| memcpy(wsm_key->wapi_pairwise.mic_key, | |
| &key->key[16], 16); | |
| wsm_key->wapi_pairwise.keyid = key->keyidx; | |
| } else { | |
| wsm_key->type = WSM_KEY_TYPE_WAPI_GROUP; | |
| memcpy(wsm_key->wapi_group.keydata, | |
| &key->key[0], 16); | |
| memcpy(wsm_key->wapi_group.mic_key, | |
| &key->key[16], 16); | |
| wsm_key->wapi_group.keyid = key->keyidx; | |
| } | |
| break; | |
| default: | |
| pr_warn("Unhandled key type %d\n", key->cipher); | |
| cw1200_free_key(priv, idx); | |
| ret = -EOPNOTSUPP; | |
| goto finally; | |
| } | |
| ret = wsm_add_key(priv, wsm_key); | |
| if (!ret) | |
| key->hw_key_idx = idx; | |
| else | |
| cw1200_free_key(priv, idx); | |
| } else if (cmd == DISABLE_KEY) { | |
| struct wsm_remove_key wsm_key = { | |
| .index = key->hw_key_idx, | |
| }; | |
| if (wsm_key.index > WSM_KEY_MAX_INDEX) { | |
| ret = -EINVAL; | |
| goto finally; | |
| } | |
| cw1200_free_key(priv, wsm_key.index); | |
| ret = wsm_remove_key(priv, &wsm_key); | |
| } else { | |
| pr_warn("Unhandled key command %d\n", cmd); | |
| } | |
| finally: | |
| mutex_unlock(&priv->conf_mutex); | |
| return ret; | |
| } | |
| void cw1200_wep_key_work(struct work_struct *work) | |
| { | |
| struct cw1200_common *priv = | |
| container_of(work, struct cw1200_common, wep_key_work); | |
| u8 queue_id = cw1200_queue_get_queue_id(priv->pending_frame_id); | |
| struct cw1200_queue *queue = &priv->tx_queue[queue_id]; | |
| __le32 wep_default_key_id = __cpu_to_le32( | |
| priv->wep_default_key_id); | |
| pr_debug("[STA] Setting default WEP key: %d\n", | |
| priv->wep_default_key_id); | |
| wsm_flush_tx(priv); | |
| wsm_write_mib(priv, WSM_MIB_ID_DOT11_WEP_DEFAULT_KEY_ID, | |
| &wep_default_key_id, sizeof(wep_default_key_id)); | |
| cw1200_queue_requeue(queue, priv->pending_frame_id); | |
| wsm_unlock_tx(priv); | |
| } | |
| int cw1200_set_rts_threshold(struct ieee80211_hw *hw, u32 value) | |
| { | |
| int ret = 0; | |
| __le32 val32; | |
| struct cw1200_common *priv = hw->priv; | |
| if (priv->mode == NL80211_IFTYPE_UNSPECIFIED) | |
| return 0; | |
| if (value != (u32) -1) | |
| val32 = __cpu_to_le32(value); | |
| else | |
| val32 = 0; /* disabled */ | |
| if (priv->mode == NL80211_IFTYPE_UNSPECIFIED) { | |
| /* device is down, can _not_ set threshold */ | |
| ret = -ENODEV; | |
| goto out; | |
| } | |
| if (priv->rts_threshold == value) | |
| goto out; | |
| pr_debug("[STA] Setting RTS threshold: %d\n", | |
| priv->rts_threshold); | |
| /* mutex_lock(&priv->conf_mutex); */ | |
| ret = wsm_write_mib(priv, WSM_MIB_ID_DOT11_RTS_THRESHOLD, | |
| &val32, sizeof(val32)); | |
| if (!ret) | |
| priv->rts_threshold = value; | |
| /* mutex_unlock(&priv->conf_mutex); */ | |
| out: | |
| return ret; | |
| } | |
| /* If successful, LOCKS the TX queue! */ | |
| static int __cw1200_flush(struct cw1200_common *priv, bool drop) | |
| { | |
| int i, ret; | |
| for (;;) { | |
| /* TODO: correct flush handling is required when dev_stop. | |
| * Temporary workaround: 2s | |
| */ | |
| if (drop) { | |
| for (i = 0; i < 4; ++i) | |
| cw1200_queue_clear(&priv->tx_queue[i]); | |
| } else { | |
| ret = wait_event_timeout( | |
| priv->tx_queue_stats.wait_link_id_empty, | |
| cw1200_queue_stats_is_empty( | |
| &priv->tx_queue_stats, -1), | |
| 2 * HZ); | |
| } | |
| if (!drop && ret <= 0) { | |
| ret = -ETIMEDOUT; | |
| break; | |
| } else { | |
| ret = 0; | |
| } | |
| wsm_lock_tx(priv); | |
| if (!cw1200_queue_stats_is_empty(&priv->tx_queue_stats, -1)) { | |
| /* Highly unlikely: WSM requeued frames. */ | |
| wsm_unlock_tx(priv); | |
| continue; | |
| } | |
| break; | |
| } | |
| return ret; | |
| } | |
| void cw1200_flush(struct ieee80211_hw *hw, struct ieee80211_vif *vif, | |
| u32 queues, bool drop) | |
| { | |
| struct cw1200_common *priv = hw->priv; | |
| switch (priv->mode) { | |
| case NL80211_IFTYPE_MONITOR: | |
| drop = true; | |
| break; | |
| case NL80211_IFTYPE_AP: | |
| if (!priv->enable_beacon) | |
| drop = true; | |
| break; | |
| } | |
| if (!__cw1200_flush(priv, drop)) | |
| wsm_unlock_tx(priv); | |
| return; | |
| } | |
| /* ******************************************************************** */ | |
| /* WSM callbacks */ | |
| void cw1200_free_event_queue(struct cw1200_common *priv) | |
| { | |
| LIST_HEAD(list); | |
| spin_lock(&priv->event_queue_lock); | |
| list_splice_init(&priv->event_queue, &list); | |
| spin_unlock(&priv->event_queue_lock); | |
| __cw1200_free_event_queue(&list); | |
| } | |
| void cw1200_event_handler(struct work_struct *work) | |
| { | |
| struct cw1200_common *priv = | |
| container_of(work, struct cw1200_common, event_handler); | |
| struct cw1200_wsm_event *event; | |
| LIST_HEAD(list); | |
| spin_lock(&priv->event_queue_lock); | |
| list_splice_init(&priv->event_queue, &list); | |
| spin_unlock(&priv->event_queue_lock); | |
| list_for_each_entry(event, &list, link) { | |
| switch (event->evt.id) { | |
| case WSM_EVENT_ERROR: | |
| pr_err("Unhandled WSM Error from LMAC\n"); | |
| break; | |
| case WSM_EVENT_BSS_LOST: | |
| pr_debug("[CQM] BSS lost.\n"); | |
| cancel_work_sync(&priv->unjoin_work); | |
| if (!down_trylock(&priv->scan.lock)) { | |
| cw1200_cqm_bssloss_sm(priv, 1, 0, 0); | |
| up(&priv->scan.lock); | |
| } else { | |
| /* Scan is in progress. Delay reporting. | |
| * Scan complete will trigger bss_loss_work | |
| */ | |
| priv->delayed_link_loss = 1; | |
| /* Also start a watchdog. */ | |
| queue_delayed_work(priv->workqueue, | |
| &priv->bss_loss_work, 5*HZ); | |
| } | |
| break; | |
| case WSM_EVENT_BSS_REGAINED: | |
| pr_debug("[CQM] BSS regained.\n"); | |
| cw1200_cqm_bssloss_sm(priv, 0, 0, 0); | |
| cancel_work_sync(&priv->unjoin_work); | |
| break; | |
| case WSM_EVENT_RADAR_DETECTED: | |
| wiphy_info(priv->hw->wiphy, "radar pulse detected\n"); | |
| break; | |
| case WSM_EVENT_RCPI_RSSI: | |
| { | |
| /* RSSI: signed Q8.0, RCPI: unsigned Q7.1 | |
| * RSSI = RCPI / 2 - 110 | |
| */ | |
| int rcpi_rssi = (int)(event->evt.data & 0xFF); | |
| int cqm_evt; | |
| if (priv->cqm_use_rssi) | |
| rcpi_rssi = (s8)rcpi_rssi; | |
| else | |
| rcpi_rssi = rcpi_rssi / 2 - 110; | |
| cqm_evt = (rcpi_rssi <= priv->cqm_rssi_thold) ? | |
| NL80211_CQM_RSSI_THRESHOLD_EVENT_LOW : | |
| NL80211_CQM_RSSI_THRESHOLD_EVENT_HIGH; | |
| pr_debug("[CQM] RSSI event: %d.\n", rcpi_rssi); | |
| ieee80211_cqm_rssi_notify(priv->vif, cqm_evt, | |
| GFP_KERNEL); | |
| break; | |
| } | |
| case WSM_EVENT_BT_INACTIVE: | |
| pr_warn("Unhandled BT INACTIVE from LMAC\n"); | |
| break; | |
| case WSM_EVENT_BT_ACTIVE: | |
| pr_warn("Unhandled BT ACTIVE from LMAC\n"); | |
| break; | |
| } | |
| } | |
| __cw1200_free_event_queue(&list); | |
| } | |
| void cw1200_bss_loss_work(struct work_struct *work) | |
| { | |
| struct cw1200_common *priv = | |
| container_of(work, struct cw1200_common, bss_loss_work.work); | |
| pr_debug("[CQM] Reporting connection loss.\n"); | |
| wsm_lock_tx(priv); | |
| if (queue_work(priv->workqueue, &priv->unjoin_work) <= 0) | |
| wsm_unlock_tx(priv); | |
| } | |
| void cw1200_bss_params_work(struct work_struct *work) | |
| { | |
| struct cw1200_common *priv = | |
| container_of(work, struct cw1200_common, bss_params_work); | |
| mutex_lock(&priv->conf_mutex); | |
| priv->bss_params.reset_beacon_loss = 1; | |
| wsm_set_bss_params(priv, &priv->bss_params); | |
| priv->bss_params.reset_beacon_loss = 0; | |
| mutex_unlock(&priv->conf_mutex); | |
| } | |
| /* ******************************************************************** */ | |
| /* Internal API */ | |
| /* This function is called to Parse the SDD file | |
| * to extract listen_interval and PTA related information | |
| * sdd is a TLV: u8 id, u8 len, u8 data[] | |
| */ | |
| static int cw1200_parse_sdd_file(struct cw1200_common *priv) | |
| { | |
| const u8 *p = priv->sdd->data; | |
| int ret = 0; | |
| while (p + 2 <= priv->sdd->data + priv->sdd->size) { | |
| if (p + p[1] + 2 > priv->sdd->data + priv->sdd->size) { | |
| pr_warn("Malformed sdd structure\n"); | |
| return -1; | |
| } | |
| switch (p[0]) { | |
| case SDD_PTA_CFG_ELT_ID: { | |
| u16 v; | |
| if (p[1] < 4) { | |
| pr_warn("SDD_PTA_CFG_ELT_ID malformed\n"); | |
| ret = -1; | |
| break; | |
| } | |
| v = le16_to_cpu(*((__le16 *)(p + 2))); | |
| if (!v) /* non-zero means this is enabled */ | |
| break; | |
| v = le16_to_cpu(*((__le16 *)(p + 4))); | |
| priv->conf_listen_interval = (v >> 7) & 0x1F; | |
| pr_debug("PTA found; Listen Interval %d\n", | |
| priv->conf_listen_interval); | |
| break; | |
| } | |
| case SDD_REFERENCE_FREQUENCY_ELT_ID: { | |
| u16 clk = le16_to_cpu(*((__le16 *)(p + 2))); | |
| if (clk != priv->hw_refclk) | |
| pr_warn("SDD file doesn't match configured refclk (%d vs %d)\n", | |
| clk, priv->hw_refclk); | |
| break; | |
| } | |
| default: | |
| break; | |
| } | |
| p += p[1] + 2; | |
| } | |
| if (!priv->bt_present) { | |
| pr_debug("PTA element NOT found.\n"); | |
| priv->conf_listen_interval = 0; | |
| } | |
| return ret; | |
| } | |
| int cw1200_setup_mac(struct cw1200_common *priv) | |
| { | |
| int ret = 0; | |
| /* NOTE: There is a bug in FW: it reports signal | |
| * as RSSI if RSSI subscription is enabled. | |
| * It's not enough to set WSM_RCPI_RSSI_USE_RSSI. | |
| * | |
| * NOTE2: RSSI based reports have been switched to RCPI, since | |
| * FW has a bug and RSSI reported values are not stable, | |
| * what can leads to signal level oscilations in user-end applications | |
| */ | |
| struct wsm_rcpi_rssi_threshold threshold = { | |
| .rssiRcpiMode = WSM_RCPI_RSSI_THRESHOLD_ENABLE | | |
| WSM_RCPI_RSSI_DONT_USE_UPPER | | |
| WSM_RCPI_RSSI_DONT_USE_LOWER, | |
| .rollingAverageCount = 16, | |
| }; | |
| struct wsm_configuration cfg = { | |
| .dot11StationId = &priv->mac_addr[0], | |
| }; | |
| /* Remember the decission here to make sure, we will handle | |
| * the RCPI/RSSI value correctly on WSM_EVENT_RCPI_RSS | |
| */ | |
| if (threshold.rssiRcpiMode & WSM_RCPI_RSSI_USE_RSSI) | |
| priv->cqm_use_rssi = true; | |
| if (!priv->sdd) { | |
| ret = request_firmware(&priv->sdd, priv->sdd_path, priv->pdev); | |
| if (ret) { | |
| pr_err("Can't load sdd file %s.\n", priv->sdd_path); | |
| return ret; | |
| } | |
| cw1200_parse_sdd_file(priv); | |
| } | |
| cfg.dpdData = priv->sdd->data; | |
| cfg.dpdData_size = priv->sdd->size; | |
| ret = wsm_configuration(priv, &cfg); | |
| if (ret) | |
| return ret; | |
| /* Configure RSSI/SCPI reporting as RSSI. */ | |
| wsm_set_rcpi_rssi_threshold(priv, &threshold); | |
| return 0; | |
| } | |
| static void cw1200_join_complete(struct cw1200_common *priv) | |
| { | |
| pr_debug("[STA] Join complete (%d)\n", priv->join_complete_status); | |
| priv->join_pending = false; | |
| if (priv->join_complete_status) { | |
| priv->join_status = CW1200_JOIN_STATUS_PASSIVE; | |
| cw1200_update_listening(priv, priv->listening); | |
| cw1200_do_unjoin(priv); | |
| ieee80211_connection_loss(priv->vif); | |
| } else { | |
| if (priv->mode == NL80211_IFTYPE_ADHOC) | |
| priv->join_status = CW1200_JOIN_STATUS_IBSS; | |
| else | |
| priv->join_status = CW1200_JOIN_STATUS_PRE_STA; | |
| } | |
| wsm_unlock_tx(priv); /* Clearing the lock held before do_join() */ | |
| } | |
| void cw1200_join_complete_work(struct work_struct *work) | |
| { | |
| struct cw1200_common *priv = | |
| container_of(work, struct cw1200_common, join_complete_work); | |
| mutex_lock(&priv->conf_mutex); | |
| cw1200_join_complete(priv); | |
| mutex_unlock(&priv->conf_mutex); | |
| } | |
| void cw1200_join_complete_cb(struct cw1200_common *priv, | |
| struct wsm_join_complete *arg) | |
| { | |
| pr_debug("[STA] cw1200_join_complete_cb called, status=%d.\n", | |
| arg->status); | |
| if (cancel_delayed_work(&priv->join_timeout)) { | |
| priv->join_complete_status = arg->status; | |
| queue_work(priv->workqueue, &priv->join_complete_work); | |
| } | |
| } | |
| /* MUST be called with tx_lock held! It will be unlocked for us. */ | |
| static void cw1200_do_join(struct cw1200_common *priv) | |
| { | |
| const u8 *bssid; | |
| struct ieee80211_bss_conf *conf = &priv->vif->bss_conf; | |
| struct cfg80211_bss *bss = NULL; | |
| struct wsm_protected_mgmt_policy mgmt_policy; | |
| struct wsm_join join = { | |
| .mode = conf->ibss_joined ? | |
| WSM_JOIN_MODE_IBSS : WSM_JOIN_MODE_BSS, | |
| .preamble_type = WSM_JOIN_PREAMBLE_LONG, | |
| .probe_for_join = 1, | |
| .atim_window = 0, | |
| .basic_rate_set = cw1200_rate_mask_to_wsm(priv, | |
| conf->basic_rates), | |
| }; | |
| if (delayed_work_pending(&priv->join_timeout)) { | |
| pr_warn("[STA] - Join request already pending, skipping..\n"); | |
| wsm_unlock_tx(priv); | |
| return; | |
| } | |
| if (priv->join_status) | |
| cw1200_do_unjoin(priv); | |
| bssid = priv->vif->bss_conf.bssid; | |
| bss = cfg80211_get_bss(priv->hw->wiphy, priv->channel, bssid, NULL, 0, | |
| IEEE80211_BSS_TYPE_ANY, IEEE80211_PRIVACY_ANY); | |
| if (!bss && !conf->ibss_joined) { | |
| wsm_unlock_tx(priv); | |
| return; | |
| } | |
| mutex_lock(&priv->conf_mutex); | |
| /* Under the conf lock: check scan status and | |
| * bail out if it is in progress. | |
| */ | |
| if (atomic_read(&priv->scan.in_progress)) { | |
| wsm_unlock_tx(priv); | |
| goto done_put; | |
| } | |
| priv->join_pending = true; | |
| /* Sanity check basic rates */ | |
| if (!join.basic_rate_set) | |
| join.basic_rate_set = 7; | |
| /* Sanity check beacon interval */ | |
| if (!priv->beacon_int) | |
| priv->beacon_int = 1; | |
| join.beacon_interval = priv->beacon_int; | |
| /* BT Coex related changes */ | |
| if (priv->bt_present) { | |
| if (((priv->conf_listen_interval * 100) % | |
| priv->beacon_int) == 0) | |
| priv->listen_interval = | |
| ((priv->conf_listen_interval * 100) / | |
| priv->beacon_int); | |
| else | |
| priv->listen_interval = | |
| ((priv->conf_listen_interval * 100) / | |
| priv->beacon_int + 1); | |
| } | |
| if (priv->hw->conf.ps_dtim_period) | |
| priv->join_dtim_period = priv->hw->conf.ps_dtim_period; | |
| join.dtim_period = priv->join_dtim_period; | |
| join.channel_number = priv->channel->hw_value; | |
| join.band = (priv->channel->band == IEEE80211_BAND_5GHZ) ? | |
| WSM_PHY_BAND_5G : WSM_PHY_BAND_2_4G; | |
| memcpy(join.bssid, bssid, sizeof(join.bssid)); | |
| pr_debug("[STA] Join BSSID: %pM DTIM: %d, interval: %d\n", | |
| join.bssid, | |
| join.dtim_period, priv->beacon_int); | |
| if (!conf->ibss_joined) { | |
| const u8 *ssidie; | |
| rcu_read_lock(); | |
| ssidie = ieee80211_bss_get_ie(bss, WLAN_EID_SSID); | |
| if (ssidie) { | |
| join.ssid_len = ssidie[1]; | |
| memcpy(join.ssid, &ssidie[2], join.ssid_len); | |
| } | |
| rcu_read_unlock(); | |
| } | |
| if (priv->vif->p2p) { | |
| join.flags |= WSM_JOIN_FLAGS_P2P_GO; | |
| join.basic_rate_set = | |
| cw1200_rate_mask_to_wsm(priv, 0xFF0); | |
| } | |
| /* Enable asynchronous join calls */ | |
| if (!conf->ibss_joined) { | |
| join.flags |= WSM_JOIN_FLAGS_FORCE; | |
| join.flags |= WSM_JOIN_FLAGS_FORCE_WITH_COMPLETE_IND; | |
| } | |
| wsm_flush_tx(priv); | |
| /* Stay Awake for Join and Auth Timeouts and a bit more */ | |
| cw1200_pm_stay_awake(&priv->pm_state, | |
| CW1200_JOIN_TIMEOUT + CW1200_AUTH_TIMEOUT); | |
| cw1200_update_listening(priv, false); | |
| /* Turn on Block ACKs */ | |
| wsm_set_block_ack_policy(priv, priv->ba_tx_tid_mask, | |
| priv->ba_rx_tid_mask); | |
| /* Set up timeout */ | |
| if (join.flags & WSM_JOIN_FLAGS_FORCE_WITH_COMPLETE_IND) { | |
| priv->join_status = CW1200_JOIN_STATUS_JOINING; | |
| queue_delayed_work(priv->workqueue, | |
| &priv->join_timeout, | |
| CW1200_JOIN_TIMEOUT); | |
| } | |
| /* 802.11w protected mgmt frames */ | |
| mgmt_policy.protectedMgmtEnable = 0; | |
| mgmt_policy.unprotectedMgmtFramesAllowed = 1; | |
| mgmt_policy.encryptionForAuthFrame = 1; | |
| wsm_set_protected_mgmt_policy(priv, &mgmt_policy); | |
| /* Perform actual join */ | |
| if (wsm_join(priv, &join)) { | |
| pr_err("[STA] cw1200_join_work: wsm_join failed!\n"); | |
| cancel_delayed_work_sync(&priv->join_timeout); | |
| cw1200_update_listening(priv, priv->listening); | |
| /* Tx lock still held, unjoin will clear it. */ | |
| if (queue_work(priv->workqueue, &priv->unjoin_work) <= 0) | |
| wsm_unlock_tx(priv); | |
| } else { | |
| if (!(join.flags & WSM_JOIN_FLAGS_FORCE_WITH_COMPLETE_IND)) | |
| cw1200_join_complete(priv); /* Will clear tx_lock */ | |
| /* Upload keys */ | |
| cw1200_upload_keys(priv); | |
| /* Due to beacon filtering it is possible that the | |
| * AP's beacon is not known for the mac80211 stack. | |
| * Disable filtering temporary to make sure the stack | |
| * receives at least one | |
| */ | |
| priv->disable_beacon_filter = true; | |
| } | |
| cw1200_update_filtering(priv); | |
| done_put: | |
| mutex_unlock(&priv->conf_mutex); | |
| if (bss) | |
| cfg80211_put_bss(priv->hw->wiphy, bss); | |
| } | |
| void cw1200_join_timeout(struct work_struct *work) | |
| { | |
| struct cw1200_common *priv = | |
| container_of(work, struct cw1200_common, join_timeout.work); | |
| pr_debug("[WSM] Join timed out.\n"); | |
| wsm_lock_tx(priv); | |
| if (queue_work(priv->workqueue, &priv->unjoin_work) <= 0) | |
| wsm_unlock_tx(priv); | |
| } | |
| static void cw1200_do_unjoin(struct cw1200_common *priv) | |
| { | |
| struct wsm_reset reset = { | |
| .reset_statistics = true, | |
| }; | |
| cancel_delayed_work_sync(&priv->join_timeout); | |
| mutex_lock(&priv->conf_mutex); | |
| priv->join_pending = false; | |
| if (atomic_read(&priv->scan.in_progress)) { | |
| if (priv->delayed_unjoin) | |
| wiphy_dbg(priv->hw->wiphy, "Delayed unjoin is already scheduled.\n"); | |
| else | |
| priv->delayed_unjoin = true; | |
| goto done; | |
| } | |
| priv->delayed_link_loss = false; | |
| if (!priv->join_status) | |
| goto done; | |
| if (priv->join_status == CW1200_JOIN_STATUS_AP) | |
| goto done; | |
| cancel_work_sync(&priv->update_filtering_work); | |
| cancel_work_sync(&priv->set_beacon_wakeup_period_work); | |
| priv->join_status = CW1200_JOIN_STATUS_PASSIVE; | |
| /* Unjoin is a reset. */ | |
| wsm_flush_tx(priv); | |
| wsm_keep_alive_period(priv, 0); | |
| wsm_reset(priv, &reset); | |
| wsm_set_output_power(priv, priv->output_power * 10); | |
| priv->join_dtim_period = 0; | |
| cw1200_setup_mac(priv); | |
| cw1200_free_event_queue(priv); | |
| cancel_work_sync(&priv->event_handler); | |
| cw1200_update_listening(priv, priv->listening); | |
| cw1200_cqm_bssloss_sm(priv, 0, 0, 0); | |
| /* Disable Block ACKs */ | |
| wsm_set_block_ack_policy(priv, 0, 0); | |
| priv->disable_beacon_filter = false; | |
| cw1200_update_filtering(priv); | |
| memset(&priv->association_mode, 0, | |
| sizeof(priv->association_mode)); | |
| memset(&priv->bss_params, 0, sizeof(priv->bss_params)); | |
| priv->setbssparams_done = false; | |
| memset(&priv->firmware_ps_mode, 0, | |
| sizeof(priv->firmware_ps_mode)); | |
| pr_debug("[STA] Unjoin completed.\n"); | |
| done: | |
| mutex_unlock(&priv->conf_mutex); | |
| } | |
| void cw1200_unjoin_work(struct work_struct *work) | |
| { | |
| struct cw1200_common *priv = | |
| container_of(work, struct cw1200_common, unjoin_work); | |
| cw1200_do_unjoin(priv); | |
| /* Tell the stack we're dead */ | |
| ieee80211_connection_loss(priv->vif); | |
| wsm_unlock_tx(priv); | |
| } | |
| int cw1200_enable_listening(struct cw1200_common *priv) | |
| { | |
| struct wsm_start start = { | |
| .mode = WSM_START_MODE_P2P_DEV, | |
| .band = WSM_PHY_BAND_2_4G, | |
| .beacon_interval = 100, | |
| .dtim_period = 1, | |
| .probe_delay = 0, | |
| .basic_rate_set = 0x0F, | |
| }; | |
| if (priv->channel) { | |
| start.band = priv->channel->band == IEEE80211_BAND_5GHZ ? | |
| WSM_PHY_BAND_5G : WSM_PHY_BAND_2_4G; | |
| start.channel_number = priv->channel->hw_value; | |
| } else { | |
| start.band = WSM_PHY_BAND_2_4G; | |
| start.channel_number = 1; | |
| } | |
| return wsm_start(priv, &start); | |
| } | |
| int cw1200_disable_listening(struct cw1200_common *priv) | |
| { | |
| int ret; | |
| struct wsm_reset reset = { | |
| .reset_statistics = true, | |
| }; | |
| ret = wsm_reset(priv, &reset); | |
| return ret; | |
| } | |
| void cw1200_update_listening(struct cw1200_common *priv, bool enabled) | |
| { | |
| if (enabled) { | |
| if (priv->join_status == CW1200_JOIN_STATUS_PASSIVE) { | |
| if (!cw1200_enable_listening(priv)) | |
| priv->join_status = CW1200_JOIN_STATUS_MONITOR; | |
| wsm_set_probe_responder(priv, true); | |
| } | |
| } else { | |
| if (priv->join_status == CW1200_JOIN_STATUS_MONITOR) { | |
| if (!cw1200_disable_listening(priv)) | |
| priv->join_status = CW1200_JOIN_STATUS_PASSIVE; | |
| wsm_set_probe_responder(priv, false); | |
| } | |
| } | |
| } | |
| int cw1200_set_uapsd_param(struct cw1200_common *priv, | |
| const struct wsm_edca_params *arg) | |
| { | |
| int ret; | |
| u16 uapsd_flags = 0; | |
| /* Here's the mapping AC [queue, bit] | |
| * VO [0,3], VI [1, 2], BE [2, 1], BK [3, 0] | |
| */ | |
| if (arg->uapsd_enable[0]) | |
| uapsd_flags |= 1 << 3; | |
| if (arg->uapsd_enable[1]) | |
| uapsd_flags |= 1 << 2; | |
| if (arg->uapsd_enable[2]) | |
| uapsd_flags |= 1 << 1; | |
| if (arg->uapsd_enable[3]) | |
| uapsd_flags |= 1; | |
| /* Currently pseudo U-APSD operation is not supported, so setting | |
| * MinAutoTriggerInterval, MaxAutoTriggerInterval and | |
| * AutoTriggerStep to 0 | |
| */ | |
| priv->uapsd_info.uapsd_flags = cpu_to_le16(uapsd_flags); | |
| priv->uapsd_info.min_auto_trigger_interval = 0; | |
| priv->uapsd_info.max_auto_trigger_interval = 0; | |
| priv->uapsd_info.auto_trigger_step = 0; | |
| ret = wsm_set_uapsd_info(priv, &priv->uapsd_info); | |
| return ret; | |
| } | |
| /* ******************************************************************** */ | |
| /* AP API */ | |
| int cw1200_sta_add(struct ieee80211_hw *hw, struct ieee80211_vif *vif, | |
| struct ieee80211_sta *sta) | |
| { | |
| struct cw1200_common *priv = hw->priv; | |
| struct cw1200_sta_priv *sta_priv = | |
| (struct cw1200_sta_priv *)&sta->drv_priv; | |
| struct cw1200_link_entry *entry; | |
| struct sk_buff *skb; | |
| if (priv->mode != NL80211_IFTYPE_AP) | |
| return 0; | |
| sta_priv->link_id = cw1200_find_link_id(priv, sta->addr); | |
| if (WARN_ON(!sta_priv->link_id)) { | |
| wiphy_info(priv->hw->wiphy, | |
| "[AP] No more link IDs available.\n"); | |
| return -ENOENT; | |
| } | |
| entry = &priv->link_id_db[sta_priv->link_id - 1]; | |
| spin_lock_bh(&priv->ps_state_lock); | |
| if ((sta->uapsd_queues & IEEE80211_WMM_IE_STA_QOSINFO_AC_MASK) == | |
| IEEE80211_WMM_IE_STA_QOSINFO_AC_MASK) | |
| priv->sta_asleep_mask |= BIT(sta_priv->link_id); | |
| entry->status = CW1200_LINK_HARD; | |
| while ((skb = skb_dequeue(&entry->rx_queue))) | |
| ieee80211_rx_irqsafe(priv->hw, skb); | |
| spin_unlock_bh(&priv->ps_state_lock); | |
| return 0; | |
| } | |
| int cw1200_sta_remove(struct ieee80211_hw *hw, struct ieee80211_vif *vif, | |
| struct ieee80211_sta *sta) | |
| { | |
| struct cw1200_common *priv = hw->priv; | |
| struct cw1200_sta_priv *sta_priv = | |
| (struct cw1200_sta_priv *)&sta->drv_priv; | |
| struct cw1200_link_entry *entry; | |
| if (priv->mode != NL80211_IFTYPE_AP || !sta_priv->link_id) | |
| return 0; | |
| entry = &priv->link_id_db[sta_priv->link_id - 1]; | |
| spin_lock_bh(&priv->ps_state_lock); | |
| entry->status = CW1200_LINK_RESERVE; | |
| entry->timestamp = jiffies; | |
| wsm_lock_tx_async(priv); | |
| if (queue_work(priv->workqueue, &priv->link_id_work) <= 0) | |
| wsm_unlock_tx(priv); | |
| spin_unlock_bh(&priv->ps_state_lock); | |
| flush_workqueue(priv->workqueue); | |
| return 0; | |
| } | |
| static void __cw1200_sta_notify(struct ieee80211_hw *dev, | |
| struct ieee80211_vif *vif, | |
| enum sta_notify_cmd notify_cmd, | |
| int link_id) | |
| { | |
| struct cw1200_common *priv = dev->priv; | |
| u32 bit, prev; | |
| /* Zero link id means "for all link IDs" */ | |
| if (link_id) | |
| bit = BIT(link_id); | |
| else if (WARN_ON_ONCE(notify_cmd != STA_NOTIFY_AWAKE)) | |
| bit = 0; | |
| else | |
| bit = priv->link_id_map; | |
| prev = priv->sta_asleep_mask & bit; | |
| switch (notify_cmd) { | |
| case STA_NOTIFY_SLEEP: | |
| if (!prev) { | |
| if (priv->buffered_multicasts && | |
| !priv->sta_asleep_mask) | |
| queue_work(priv->workqueue, | |
| &priv->multicast_start_work); | |
| priv->sta_asleep_mask |= bit; | |
| } | |
| break; | |
| case STA_NOTIFY_AWAKE: | |
| if (prev) { | |
| priv->sta_asleep_mask &= ~bit; | |
| priv->pspoll_mask &= ~bit; | |
| if (priv->tx_multicast && link_id && | |
| !priv->sta_asleep_mask) | |
| queue_work(priv->workqueue, | |
| &priv->multicast_stop_work); | |
| cw1200_bh_wakeup(priv); | |
| } | |
| break; | |
| } | |
| } | |
| void cw1200_sta_notify(struct ieee80211_hw *dev, | |
| struct ieee80211_vif *vif, | |
| enum sta_notify_cmd notify_cmd, | |
| struct ieee80211_sta *sta) | |
| { | |
| struct cw1200_common *priv = dev->priv; | |
| struct cw1200_sta_priv *sta_priv = | |
| (struct cw1200_sta_priv *)&sta->drv_priv; | |
| spin_lock_bh(&priv->ps_state_lock); | |
| __cw1200_sta_notify(dev, vif, notify_cmd, sta_priv->link_id); | |
| spin_unlock_bh(&priv->ps_state_lock); | |
| } | |
| static void cw1200_ps_notify(struct cw1200_common *priv, | |
| int link_id, bool ps) | |
| { | |
| if (link_id > CW1200_MAX_STA_IN_AP_MODE) | |
| return; | |
| pr_debug("%s for LinkId: %d. STAs asleep: %.8X\n", | |
| ps ? "Stop" : "Start", | |
| link_id, priv->sta_asleep_mask); | |
| __cw1200_sta_notify(priv->hw, priv->vif, | |
| ps ? STA_NOTIFY_SLEEP : STA_NOTIFY_AWAKE, link_id); | |
| } | |
| static int cw1200_set_tim_impl(struct cw1200_common *priv, bool aid0_bit_set) | |
| { | |
| struct sk_buff *skb; | |
| struct wsm_update_ie update_ie = { | |
| .what = WSM_UPDATE_IE_BEACON, | |
| .count = 1, | |
| }; | |
| u16 tim_offset, tim_length; | |
| pr_debug("[AP] mcast: %s.\n", aid0_bit_set ? "ena" : "dis"); | |
| skb = ieee80211_beacon_get_tim(priv->hw, priv->vif, | |
| &tim_offset, &tim_length); | |
| if (!skb) { | |
| if (!__cw1200_flush(priv, true)) | |
| wsm_unlock_tx(priv); | |
| return -ENOENT; | |
| } | |
| if (tim_offset && tim_length >= 6) { | |
| /* Ignore DTIM count from mac80211: | |
| * firmware handles DTIM internally. | |
| */ | |
| skb->data[tim_offset + 2] = 0; | |
| /* Set/reset aid0 bit */ | |
| if (aid0_bit_set) | |
| skb->data[tim_offset + 4] |= 1; | |
| else | |
| skb->data[tim_offset + 4] &= ~1; | |
| } | |
| update_ie.ies = &skb->data[tim_offset]; | |
| update_ie.length = tim_length; | |
| wsm_update_ie(priv, &update_ie); | |
| dev_kfree_skb(skb); | |
| return 0; | |
| } | |
| void cw1200_set_tim_work(struct work_struct *work) | |
| { | |
| struct cw1200_common *priv = | |
| container_of(work, struct cw1200_common, set_tim_work); | |
| (void)cw1200_set_tim_impl(priv, priv->aid0_bit_set); | |
| } | |
| int cw1200_set_tim(struct ieee80211_hw *dev, struct ieee80211_sta *sta, | |
| bool set) | |
| { | |
| struct cw1200_common *priv = dev->priv; | |
| queue_work(priv->workqueue, &priv->set_tim_work); | |
| return 0; | |
| } | |
| void cw1200_set_cts_work(struct work_struct *work) | |
| { | |
| struct cw1200_common *priv = | |
| container_of(work, struct cw1200_common, set_cts_work); | |
| u8 erp_ie[3] = {WLAN_EID_ERP_INFO, 0x1, 0}; | |
| struct wsm_update_ie update_ie = { | |
| .what = WSM_UPDATE_IE_BEACON, | |
| .count = 1, | |
| .ies = erp_ie, | |
| .length = 3, | |
| }; | |
| u32 erp_info; | |
| __le32 use_cts_prot; | |
| mutex_lock(&priv->conf_mutex); | |
| erp_info = priv->erp_info; | |
| mutex_unlock(&priv->conf_mutex); | |
| use_cts_prot = | |
| erp_info & WLAN_ERP_USE_PROTECTION ? | |
| __cpu_to_le32(1) : 0; | |
| erp_ie[ERP_INFO_BYTE_OFFSET] = erp_info; | |
| pr_debug("[STA] ERP information 0x%x\n", erp_info); | |
| wsm_write_mib(priv, WSM_MIB_ID_NON_ERP_PROTECTION, | |
| &use_cts_prot, sizeof(use_cts_prot)); | |
| wsm_update_ie(priv, &update_ie); | |
| return; | |
| } | |
| static int cw1200_set_btcoexinfo(struct cw1200_common *priv) | |
| { | |
| struct wsm_override_internal_txrate arg; | |
| int ret = 0; | |
| if (priv->mode == NL80211_IFTYPE_STATION) { | |
| /* Plumb PSPOLL and NULL template */ | |
| cw1200_upload_pspoll(priv); | |
| cw1200_upload_null(priv); | |
| cw1200_upload_qosnull(priv); | |
| } else { | |
| return 0; | |
| } | |
| memset(&arg, 0, sizeof(struct wsm_override_internal_txrate)); | |
| if (!priv->vif->p2p) { | |
| /* STATION mode */ | |
| if (priv->bss_params.operational_rate_set & ~0xF) { | |
| pr_debug("[STA] STA has ERP rates\n"); | |
| /* G or BG mode */ | |
| arg.internalTxRate = (__ffs( | |
| priv->bss_params.operational_rate_set & ~0xF)); | |
| } else { | |
| pr_debug("[STA] STA has non ERP rates\n"); | |
| /* B only mode */ | |
| arg.internalTxRate = (__ffs(le32_to_cpu(priv->association_mode.basic_rate_set))); | |
| } | |
| arg.nonErpInternalTxRate = (__ffs(le32_to_cpu(priv->association_mode.basic_rate_set))); | |
| } else { | |
| /* P2P mode */ | |
| arg.internalTxRate = (__ffs(priv->bss_params.operational_rate_set & ~0xF)); | |
| arg.nonErpInternalTxRate = (__ffs(priv->bss_params.operational_rate_set & ~0xF)); | |
| } | |
| pr_debug("[STA] BTCOEX_INFO MODE %d, internalTxRate : %x, nonErpInternalTxRate: %x\n", | |
| priv->mode, | |
| arg.internalTxRate, | |
| arg.nonErpInternalTxRate); | |
| ret = wsm_write_mib(priv, WSM_MIB_ID_OVERRIDE_INTERNAL_TX_RATE, | |
| &arg, sizeof(arg)); | |
| return ret; | |
| } | |
| void cw1200_bss_info_changed(struct ieee80211_hw *dev, | |
| struct ieee80211_vif *vif, | |
| struct ieee80211_bss_conf *info, | |
| u32 changed) | |
| { | |
| struct cw1200_common *priv = dev->priv; | |
| bool do_join = false; | |
| mutex_lock(&priv->conf_mutex); | |
| pr_debug("BSS CHANGED: %08x\n", changed); | |
| /* TODO: BSS_CHANGED_QOS */ | |
| /* TODO: BSS_CHANGED_TXPOWER */ | |
| if (changed & BSS_CHANGED_ARP_FILTER) { | |
| struct wsm_mib_arp_ipv4_filter filter = {0}; | |
| int i; | |
| pr_debug("[STA] BSS_CHANGED_ARP_FILTER cnt: %d\n", | |
| info->arp_addr_cnt); | |
| /* Currently only one IP address is supported by firmware. | |
| * In case of more IPs arp filtering will be disabled. | |
| */ | |
| if (info->arp_addr_cnt > 0 && | |
| info->arp_addr_cnt <= WSM_MAX_ARP_IP_ADDRTABLE_ENTRIES) { | |
| for (i = 0; i < info->arp_addr_cnt; i++) { | |
| filter.ipv4addrs[i] = info->arp_addr_list[i]; | |
| pr_debug("[STA] addr[%d]: 0x%X\n", | |
| i, filter.ipv4addrs[i]); | |
| } | |
| filter.enable = __cpu_to_le32(1); | |
| } | |
| pr_debug("[STA] arp ip filter enable: %d\n", | |
| __le32_to_cpu(filter.enable)); | |
| wsm_set_arp_ipv4_filter(priv, &filter); | |
| } | |
| if (changed & | |
| (BSS_CHANGED_BEACON | | |
| BSS_CHANGED_AP_PROBE_RESP | | |
| BSS_CHANGED_BSSID | | |
| BSS_CHANGED_SSID | | |
| BSS_CHANGED_IBSS)) { | |
| pr_debug("BSS_CHANGED_BEACON\n"); | |
| priv->beacon_int = info->beacon_int; | |
| cw1200_update_beaconing(priv); | |
| cw1200_upload_beacon(priv); | |
| } | |
| if (changed & BSS_CHANGED_BEACON_ENABLED) { | |
| pr_debug("BSS_CHANGED_BEACON_ENABLED (%d)\n", info->enable_beacon); | |
| if (priv->enable_beacon != info->enable_beacon) { | |
| cw1200_enable_beaconing(priv, info->enable_beacon); | |
| priv->enable_beacon = info->enable_beacon; | |
| } | |
| } | |
| if (changed & BSS_CHANGED_BEACON_INT) { | |
| pr_debug("CHANGED_BEACON_INT\n"); | |
| if (info->ibss_joined) | |
| do_join = true; | |
| else if (priv->join_status == CW1200_JOIN_STATUS_AP) | |
| cw1200_update_beaconing(priv); | |
| } | |
| /* assoc/disassoc, or maybe AID changed */ | |
| if (changed & BSS_CHANGED_ASSOC) { | |
| wsm_lock_tx(priv); | |
| priv->wep_default_key_id = -1; | |
| wsm_unlock_tx(priv); | |
| } | |
| if (changed & BSS_CHANGED_BSSID) { | |
| pr_debug("BSS_CHANGED_BSSID\n"); | |
| do_join = true; | |
| } | |
| if (changed & | |
| (BSS_CHANGED_ASSOC | | |
| BSS_CHANGED_BSSID | | |
| BSS_CHANGED_IBSS | | |
| BSS_CHANGED_BASIC_RATES | | |
| BSS_CHANGED_HT)) { | |
| pr_debug("BSS_CHANGED_ASSOC\n"); | |
| if (info->assoc) { | |
| if (priv->join_status < CW1200_JOIN_STATUS_PRE_STA) { | |
| ieee80211_connection_loss(vif); | |
| mutex_unlock(&priv->conf_mutex); | |
| return; | |
| } else if (priv->join_status == CW1200_JOIN_STATUS_PRE_STA) { | |
| priv->join_status = CW1200_JOIN_STATUS_STA; | |
| } | |
| } else { | |
| do_join = true; | |
| } | |
| if (info->assoc || info->ibss_joined) { | |
| struct ieee80211_sta *sta = NULL; | |
| __le32 htprot = 0; | |
| if (info->dtim_period) | |
| priv->join_dtim_period = info->dtim_period; | |
| priv->beacon_int = info->beacon_int; | |
| rcu_read_lock(); | |
| if (info->bssid && !info->ibss_joined) | |
| sta = ieee80211_find_sta(vif, info->bssid); | |
| if (sta) { | |
| priv->ht_info.ht_cap = sta->ht_cap; | |
| priv->bss_params.operational_rate_set = | |
| cw1200_rate_mask_to_wsm(priv, | |
| sta->supp_rates[priv->channel->band]); | |
| priv->ht_info.channel_type = cfg80211_get_chandef_type(&dev->conf.chandef); | |
| priv->ht_info.operation_mode = info->ht_operation_mode; | |
| } else { | |
| memset(&priv->ht_info, 0, | |
| sizeof(priv->ht_info)); | |
| priv->bss_params.operational_rate_set = -1; | |
| } | |
| rcu_read_unlock(); | |
| /* Non Greenfield stations present */ | |
| if (priv->ht_info.operation_mode & | |
| IEEE80211_HT_OP_MODE_NON_GF_STA_PRSNT) | |
| htprot |= cpu_to_le32(WSM_NON_GREENFIELD_STA_PRESENT); | |
| /* Set HT protection method */ | |
| htprot |= cpu_to_le32((priv->ht_info.operation_mode & IEEE80211_HT_OP_MODE_PROTECTION) << 2); | |
| /* TODO: | |
| * STBC_param.dual_cts | |
| * STBC_param.LSIG_TXOP_FILL | |
| */ | |
| wsm_write_mib(priv, WSM_MIB_ID_SET_HT_PROTECTION, | |
| &htprot, sizeof(htprot)); | |
| priv->association_mode.greenfield = | |
| cw1200_ht_greenfield(&priv->ht_info); | |
| priv->association_mode.flags = | |
| WSM_ASSOCIATION_MODE_SNOOP_ASSOC_FRAMES | | |
| WSM_ASSOCIATION_MODE_USE_PREAMBLE_TYPE | | |
| WSM_ASSOCIATION_MODE_USE_HT_MODE | | |
| WSM_ASSOCIATION_MODE_USE_BASIC_RATE_SET | | |
| WSM_ASSOCIATION_MODE_USE_MPDU_START_SPACING; | |
| priv->association_mode.preamble = | |
| info->use_short_preamble ? | |
| WSM_JOIN_PREAMBLE_SHORT : | |
| WSM_JOIN_PREAMBLE_LONG; | |
| priv->association_mode.basic_rate_set = __cpu_to_le32( | |
| cw1200_rate_mask_to_wsm(priv, | |
| info->basic_rates)); | |
| priv->association_mode.mpdu_start_spacing = | |
| cw1200_ht_ampdu_density(&priv->ht_info); | |
| cw1200_cqm_bssloss_sm(priv, 0, 0, 0); | |
| cancel_work_sync(&priv->unjoin_work); | |
| priv->bss_params.beacon_lost_count = priv->cqm_beacon_loss_count; | |
| priv->bss_params.aid = info->aid; | |
| if (priv->join_dtim_period < 1) | |
| priv->join_dtim_period = 1; | |
| pr_debug("[STA] DTIM %d, interval: %d\n", | |
| priv->join_dtim_period, priv->beacon_int); | |
| pr_debug("[STA] Preamble: %d, Greenfield: %d, Aid: %d, Rates: 0x%.8X, Basic: 0x%.8X\n", | |
| priv->association_mode.preamble, | |
| priv->association_mode.greenfield, | |
| priv->bss_params.aid, | |
| priv->bss_params.operational_rate_set, | |
| priv->association_mode.basic_rate_set); | |
| wsm_set_association_mode(priv, &priv->association_mode); | |
| if (!info->ibss_joined) { | |
| wsm_keep_alive_period(priv, 30 /* sec */); | |
| wsm_set_bss_params(priv, &priv->bss_params); | |
| priv->setbssparams_done = true; | |
| cw1200_set_beacon_wakeup_period_work(&priv->set_beacon_wakeup_period_work); | |
| cw1200_set_pm(priv, &priv->powersave_mode); | |
| } | |
| if (priv->vif->p2p) { | |
| pr_debug("[STA] Setting p2p powersave configuration.\n"); | |
| wsm_set_p2p_ps_modeinfo(priv, | |
| &priv->p2p_ps_modeinfo); | |
| } | |
| if (priv->bt_present) | |
| cw1200_set_btcoexinfo(priv); | |
| } else { | |
| memset(&priv->association_mode, 0, | |
| sizeof(priv->association_mode)); | |
| memset(&priv->bss_params, 0, sizeof(priv->bss_params)); | |
| } | |
| } | |
| /* ERP Protection */ | |
| if (changed & (BSS_CHANGED_ASSOC | | |
| BSS_CHANGED_ERP_CTS_PROT | | |
| BSS_CHANGED_ERP_PREAMBLE)) { | |
| u32 prev_erp_info = priv->erp_info; | |
| if (info->use_cts_prot) | |
| priv->erp_info |= WLAN_ERP_USE_PROTECTION; | |
| else if (!(prev_erp_info & WLAN_ERP_NON_ERP_PRESENT)) | |
| priv->erp_info &= ~WLAN_ERP_USE_PROTECTION; | |
| if (info->use_short_preamble) | |
| priv->erp_info |= WLAN_ERP_BARKER_PREAMBLE; | |
| else | |
| priv->erp_info &= ~WLAN_ERP_BARKER_PREAMBLE; | |
| pr_debug("[STA] ERP Protection: %x\n", priv->erp_info); | |
| if (prev_erp_info != priv->erp_info) | |
| queue_work(priv->workqueue, &priv->set_cts_work); | |
| } | |
| /* ERP Slottime */ | |
| if (changed & (BSS_CHANGED_ASSOC | BSS_CHANGED_ERP_SLOT)) { | |
| __le32 slot_time = info->use_short_slot ? | |
| __cpu_to_le32(9) : __cpu_to_le32(20); | |
| pr_debug("[STA] Slot time: %d us.\n", | |
| __le32_to_cpu(slot_time)); | |
| wsm_write_mib(priv, WSM_MIB_ID_DOT11_SLOT_TIME, | |
| &slot_time, sizeof(slot_time)); | |
| } | |
| if (changed & (BSS_CHANGED_ASSOC | BSS_CHANGED_CQM)) { | |
| struct wsm_rcpi_rssi_threshold threshold = { | |
| .rollingAverageCount = 8, | |
| }; | |
| pr_debug("[CQM] RSSI threshold subscribe: %d +- %d\n", | |
| info->cqm_rssi_thold, info->cqm_rssi_hyst); | |
| priv->cqm_rssi_thold = info->cqm_rssi_thold; | |
| priv->cqm_rssi_hyst = info->cqm_rssi_hyst; | |
| if (info->cqm_rssi_thold || info->cqm_rssi_hyst) { | |
| /* RSSI subscription enabled */ | |
| /* TODO: It's not a correct way of setting threshold. | |
| * Upper and lower must be set equal here and adjusted | |
| * in callback. However current implementation is much | |
| * more relaible and stable. | |
| */ | |
| /* RSSI: signed Q8.0, RCPI: unsigned Q7.1 | |
| * RSSI = RCPI / 2 - 110 | |
| */ | |
| if (priv->cqm_use_rssi) { | |
| threshold.upperThreshold = | |
| info->cqm_rssi_thold + info->cqm_rssi_hyst; | |
| threshold.lowerThreshold = | |
| info->cqm_rssi_thold; | |
| threshold.rssiRcpiMode |= WSM_RCPI_RSSI_USE_RSSI; | |
| } else { | |
| threshold.upperThreshold = (info->cqm_rssi_thold + info->cqm_rssi_hyst + 110) * 2; | |
| threshold.lowerThreshold = (info->cqm_rssi_thold + 110) * 2; | |
| } | |
| threshold.rssiRcpiMode |= WSM_RCPI_RSSI_THRESHOLD_ENABLE; | |
| } else { | |
| /* There is a bug in FW, see sta.c. We have to enable | |
| * dummy subscription to get correct RSSI values. | |
| */ | |
| threshold.rssiRcpiMode |= | |
| WSM_RCPI_RSSI_THRESHOLD_ENABLE | | |
| WSM_RCPI_RSSI_DONT_USE_UPPER | | |
| WSM_RCPI_RSSI_DONT_USE_LOWER; | |
| if (priv->cqm_use_rssi) | |
| threshold.rssiRcpiMode |= WSM_RCPI_RSSI_USE_RSSI; | |
| } | |
| wsm_set_rcpi_rssi_threshold(priv, &threshold); | |
| } | |
| mutex_unlock(&priv->conf_mutex); | |
| if (do_join) { | |
| wsm_lock_tx(priv); | |
| cw1200_do_join(priv); /* Will unlock it for us */ | |
| } | |
| } | |
| void cw1200_multicast_start_work(struct work_struct *work) | |
| { | |
| struct cw1200_common *priv = | |
| container_of(work, struct cw1200_common, multicast_start_work); | |
| long tmo = priv->join_dtim_period * | |
| (priv->beacon_int + 20) * HZ / 1024; | |
| cancel_work_sync(&priv->multicast_stop_work); | |
| if (!priv->aid0_bit_set) { | |
| wsm_lock_tx(priv); | |
| cw1200_set_tim_impl(priv, true); | |
| priv->aid0_bit_set = true; | |
| mod_timer(&priv->mcast_timeout, jiffies + tmo); | |
| wsm_unlock_tx(priv); | |
| } | |
| } | |
| void cw1200_multicast_stop_work(struct work_struct *work) | |
| { | |
| struct cw1200_common *priv = | |
| container_of(work, struct cw1200_common, multicast_stop_work); | |
| if (priv->aid0_bit_set) { | |
| del_timer_sync(&priv->mcast_timeout); | |
| wsm_lock_tx(priv); | |
| priv->aid0_bit_set = false; | |
| cw1200_set_tim_impl(priv, false); | |
| wsm_unlock_tx(priv); | |
| } | |
| } | |
| void cw1200_mcast_timeout(unsigned long arg) | |
| { | |
| struct cw1200_common *priv = | |
| (struct cw1200_common *)arg; | |
| wiphy_warn(priv->hw->wiphy, | |
| "Multicast delivery timeout.\n"); | |
| spin_lock_bh(&priv->ps_state_lock); | |
| priv->tx_multicast = priv->aid0_bit_set && | |
| priv->buffered_multicasts; | |
| if (priv->tx_multicast) | |
| cw1200_bh_wakeup(priv); | |
| spin_unlock_bh(&priv->ps_state_lock); | |
| } | |
| int cw1200_ampdu_action(struct ieee80211_hw *hw, | |
| struct ieee80211_vif *vif, | |
| enum ieee80211_ampdu_mlme_action action, | |
| struct ieee80211_sta *sta, u16 tid, u16 *ssn, | |
| u8 buf_size, bool amsdu) | |
| { | |
| /* Aggregation is implemented fully in firmware, | |
| * including block ack negotiation. Do not allow | |
| * mac80211 stack to do anything: it interferes with | |
| * the firmware. | |
| */ | |
| /* Note that we still need this function stubbed. */ | |
| return -ENOTSUPP; | |
| } | |
| /* ******************************************************************** */ | |
| /* WSM callback */ | |
| void cw1200_suspend_resume(struct cw1200_common *priv, | |
| struct wsm_suspend_resume *arg) | |
| { | |
| pr_debug("[AP] %s: %s\n", | |
| arg->stop ? "stop" : "start", | |
| arg->multicast ? "broadcast" : "unicast"); | |
| if (arg->multicast) { | |
| bool cancel_tmo = false; | |
| spin_lock_bh(&priv->ps_state_lock); | |
| if (arg->stop) { | |
| priv->tx_multicast = false; | |
| } else { | |
| /* Firmware sends this indication every DTIM if there | |
| * is a STA in powersave connected. There is no reason | |
| * to suspend, following wakeup will consume much more | |
| * power than it could be saved. | |
| */ | |
| cw1200_pm_stay_awake(&priv->pm_state, | |
| priv->join_dtim_period * | |
| (priv->beacon_int + 20) * HZ / 1024); | |
| priv->tx_multicast = (priv->aid0_bit_set && | |
| priv->buffered_multicasts); | |
| if (priv->tx_multicast) { | |
| cancel_tmo = true; | |
| cw1200_bh_wakeup(priv); | |
| } | |
| } | |
| spin_unlock_bh(&priv->ps_state_lock); | |
| if (cancel_tmo) | |
| del_timer_sync(&priv->mcast_timeout); | |
| } else { | |
| spin_lock_bh(&priv->ps_state_lock); | |
| cw1200_ps_notify(priv, arg->link_id, arg->stop); | |
| spin_unlock_bh(&priv->ps_state_lock); | |
| if (!arg->stop) | |
| cw1200_bh_wakeup(priv); | |
| } | |
| return; | |
| } | |
| /* ******************************************************************** */ | |
| /* AP privates */ | |
| static int cw1200_upload_beacon(struct cw1200_common *priv) | |
| { | |
| int ret = 0; | |
| struct ieee80211_mgmt *mgmt; | |
| struct wsm_template_frame frame = { | |
| .frame_type = WSM_FRAME_TYPE_BEACON, | |
| }; | |
| u16 tim_offset; | |
| u16 tim_len; | |
| if (priv->mode == NL80211_IFTYPE_STATION || | |
| priv->mode == NL80211_IFTYPE_MONITOR || | |
| priv->mode == NL80211_IFTYPE_UNSPECIFIED) | |
| goto done; | |
| if (priv->vif->p2p) | |
| frame.rate = WSM_TRANSMIT_RATE_6; | |
| frame.skb = ieee80211_beacon_get_tim(priv->hw, priv->vif, | |
| &tim_offset, &tim_len); | |
| if (!frame.skb) | |
| return -ENOMEM; | |
| ret = wsm_set_template_frame(priv, &frame); | |
| if (ret) | |
| goto done; | |
| /* TODO: Distill probe resp; remove TIM | |
| * and any other beacon-specific IEs | |
| */ | |
| mgmt = (void *)frame.skb->data; | |
| mgmt->frame_control = | |
| __cpu_to_le16(IEEE80211_FTYPE_MGMT | | |
| IEEE80211_STYPE_PROBE_RESP); | |
| frame.frame_type = WSM_FRAME_TYPE_PROBE_RESPONSE; | |
| if (priv->vif->p2p) { | |
| ret = wsm_set_probe_responder(priv, true); | |
| } else { | |
| ret = wsm_set_template_frame(priv, &frame); | |
| wsm_set_probe_responder(priv, false); | |
| } | |
| done: | |
| dev_kfree_skb(frame.skb); | |
| return ret; | |
| } | |
| static int cw1200_upload_pspoll(struct cw1200_common *priv) | |
| { | |
| int ret = 0; | |
| struct wsm_template_frame frame = { | |
| .frame_type = WSM_FRAME_TYPE_PS_POLL, | |
| .rate = 0xFF, | |
| }; | |
| frame.skb = ieee80211_pspoll_get(priv->hw, priv->vif); | |
| if (!frame.skb) | |
| return -ENOMEM; | |
| ret = wsm_set_template_frame(priv, &frame); | |
| dev_kfree_skb(frame.skb); | |
| return ret; | |
| } | |
| static int cw1200_upload_null(struct cw1200_common *priv) | |
| { | |
| int ret = 0; | |
| struct wsm_template_frame frame = { | |
| .frame_type = WSM_FRAME_TYPE_NULL, | |
| .rate = 0xFF, | |
| }; | |
| frame.skb = ieee80211_nullfunc_get(priv->hw, priv->vif); | |
| if (!frame.skb) | |
| return -ENOMEM; | |
| ret = wsm_set_template_frame(priv, &frame); | |
| dev_kfree_skb(frame.skb); | |
| return ret; | |
| } | |
| static int cw1200_upload_qosnull(struct cw1200_common *priv) | |
| { | |
| /* TODO: This needs to be implemented | |
| struct wsm_template_frame frame = { | |
| .frame_type = WSM_FRAME_TYPE_QOS_NULL, | |
| .rate = 0xFF, | |
| }; | |
| frame.skb = ieee80211_qosnullfunc_get(priv->hw, priv->vif); | |
| if (!frame.skb) | |
| return -ENOMEM; | |
| ret = wsm_set_template_frame(priv, &frame); | |
| dev_kfree_skb(frame.skb); | |
| */ | |
| return 0; | |
| } | |
| static int cw1200_enable_beaconing(struct cw1200_common *priv, | |
| bool enable) | |
| { | |
| struct wsm_beacon_transmit transmit = { | |
| .enable_beaconing = enable, | |
| }; | |
| return wsm_beacon_transmit(priv, &transmit); | |
| } | |
| static int cw1200_start_ap(struct cw1200_common *priv) | |
| { | |
| int ret; | |
| struct ieee80211_bss_conf *conf = &priv->vif->bss_conf; | |
| struct wsm_start start = { | |
| .mode = priv->vif->p2p ? | |
| WSM_START_MODE_P2P_GO : WSM_START_MODE_AP, | |
| .band = (priv->channel->band == IEEE80211_BAND_5GHZ) ? | |
| WSM_PHY_BAND_5G : WSM_PHY_BAND_2_4G, | |
| .channel_number = priv->channel->hw_value, | |
| .beacon_interval = conf->beacon_int, | |
| .dtim_period = conf->dtim_period, | |
| .preamble = conf->use_short_preamble ? | |
| WSM_JOIN_PREAMBLE_SHORT : | |
| WSM_JOIN_PREAMBLE_LONG, | |
| .probe_delay = 100, | |
| .basic_rate_set = cw1200_rate_mask_to_wsm(priv, | |
| conf->basic_rates), | |
| }; | |
| struct wsm_operational_mode mode = { | |
| .power_mode = cw1200_power_mode, | |
| .disable_more_flag_usage = true, | |
| }; | |
| memset(start.ssid, 0, sizeof(start.ssid)); | |
| if (!conf->hidden_ssid) { | |
| start.ssid_len = conf->ssid_len; | |
| memcpy(start.ssid, conf->ssid, start.ssid_len); | |
| } | |
| priv->beacon_int = conf->beacon_int; | |
| priv->join_dtim_period = conf->dtim_period; | |
| memset(&priv->link_id_db, 0, sizeof(priv->link_id_db)); | |
| pr_debug("[AP] ch: %d(%d), bcn: %d(%d), brt: 0x%.8X, ssid: %.*s.\n", | |
| start.channel_number, start.band, | |
| start.beacon_interval, start.dtim_period, | |
| start.basic_rate_set, | |
| start.ssid_len, start.ssid); | |
| ret = wsm_start(priv, &start); | |
| if (!ret) | |
| ret = cw1200_upload_keys(priv); | |
| if (!ret && priv->vif->p2p) { | |
| pr_debug("[AP] Setting p2p powersave configuration.\n"); | |
| wsm_set_p2p_ps_modeinfo(priv, &priv->p2p_ps_modeinfo); | |
| } | |
| if (!ret) { | |
| wsm_set_block_ack_policy(priv, 0, 0); | |
| priv->join_status = CW1200_JOIN_STATUS_AP; | |
| cw1200_update_filtering(priv); | |
| } | |
| wsm_set_operational_mode(priv, &mode); | |
| return ret; | |
| } | |
| static int cw1200_update_beaconing(struct cw1200_common *priv) | |
| { | |
| struct ieee80211_bss_conf *conf = &priv->vif->bss_conf; | |
| struct wsm_reset reset = { | |
| .link_id = 0, | |
| .reset_statistics = true, | |
| }; | |
| if (priv->mode == NL80211_IFTYPE_AP) { | |
| /* TODO: check if changed channel, band */ | |
| if (priv->join_status != CW1200_JOIN_STATUS_AP || | |
| priv->beacon_int != conf->beacon_int) { | |
| pr_debug("ap restarting\n"); | |
| wsm_lock_tx(priv); | |
| if (priv->join_status != CW1200_JOIN_STATUS_PASSIVE) | |
| wsm_reset(priv, &reset); | |
| priv->join_status = CW1200_JOIN_STATUS_PASSIVE; | |
| cw1200_start_ap(priv); | |
| wsm_unlock_tx(priv); | |
| } else | |
| pr_debug("ap started join_status: %d\n", | |
| priv->join_status); | |
| } | |
| return 0; | |
| } |