| /* ioctl() (mostly Linux Wireless Extensions) routines for Host AP driver */ | |
| #include <linux/slab.h> | |
| #include <linux/types.h> | |
| #include <linux/sched.h> | |
| #include <linux/ethtool.h> | |
| #include <linux/if_arp.h> | |
| #include <linux/module.h> | |
| #include <linux/etherdevice.h> | |
| #include <net/lib80211.h> | |
| #include "hostap_wlan.h" | |
| #include "hostap.h" | |
| #include "hostap_ap.h" | |
| static struct iw_statistics *hostap_get_wireless_stats(struct net_device *dev) | |
| { | |
| struct hostap_interface *iface; | |
| local_info_t *local; | |
| struct iw_statistics *wstats; | |
| iface = netdev_priv(dev); | |
| local = iface->local; | |
| /* Why are we doing that ? Jean II */ | |
| if (iface->type != HOSTAP_INTERFACE_MAIN) | |
| return NULL; | |
| wstats = &local->wstats; | |
| wstats->status = 0; | |
| wstats->discard.code = | |
| local->comm_tallies.rx_discards_wep_undecryptable; | |
| wstats->discard.misc = | |
| local->comm_tallies.rx_fcs_errors + | |
| local->comm_tallies.rx_discards_no_buffer + | |
| local->comm_tallies.tx_discards_wrong_sa; | |
| wstats->discard.retries = | |
| local->comm_tallies.tx_retry_limit_exceeded; | |
| wstats->discard.fragment = | |
| local->comm_tallies.rx_message_in_bad_msg_fragments; | |
| if (local->iw_mode != IW_MODE_MASTER && | |
| local->iw_mode != IW_MODE_REPEAT) { | |
| int update = 1; | |
| #ifdef in_atomic | |
| /* RID reading might sleep and it must not be called in | |
| * interrupt context or while atomic. However, this | |
| * function seems to be called while atomic (at least in Linux | |
| * 2.5.59). Update signal quality values only if in suitable | |
| * context. Otherwise, previous values read from tick timer | |
| * will be used. */ | |
| if (in_atomic()) | |
| update = 0; | |
| #endif /* in_atomic */ | |
| if (update && prism2_update_comms_qual(dev) == 0) | |
| wstats->qual.updated = IW_QUAL_ALL_UPDATED | | |
| IW_QUAL_DBM; | |
| wstats->qual.qual = local->comms_qual; | |
| wstats->qual.level = local->avg_signal; | |
| wstats->qual.noise = local->avg_noise; | |
| } else { | |
| wstats->qual.qual = 0; | |
| wstats->qual.level = 0; | |
| wstats->qual.noise = 0; | |
| wstats->qual.updated = IW_QUAL_ALL_INVALID; | |
| } | |
| return wstats; | |
| } | |
| static int prism2_get_datarates(struct net_device *dev, u8 *rates) | |
| { | |
| struct hostap_interface *iface; | |
| local_info_t *local; | |
| u8 buf[12]; | |
| int len; | |
| u16 val; | |
| iface = netdev_priv(dev); | |
| local = iface->local; | |
| len = local->func->get_rid(dev, HFA384X_RID_SUPPORTEDDATARATES, buf, | |
| sizeof(buf), 0); | |
| if (len < 2) | |
| return 0; | |
| val = le16_to_cpu(*(__le16 *) buf); /* string length */ | |
| if (len - 2 < val || val > 10) | |
| return 0; | |
| memcpy(rates, buf + 2, val); | |
| return val; | |
| } | |
| static int prism2_get_name(struct net_device *dev, | |
| struct iw_request_info *info, | |
| char *name, char *extra) | |
| { | |
| u8 rates[10]; | |
| int len, i, over2 = 0; | |
| len = prism2_get_datarates(dev, rates); | |
| for (i = 0; i < len; i++) { | |
| if (rates[i] == 0x0b || rates[i] == 0x16) { | |
| over2 = 1; | |
| break; | |
| } | |
| } | |
| strcpy(name, over2 ? "IEEE 802.11b" : "IEEE 802.11-DS"); | |
| return 0; | |
| } | |
| static int prism2_ioctl_siwencode(struct net_device *dev, | |
| struct iw_request_info *info, | |
| struct iw_point *erq, char *keybuf) | |
| { | |
| struct hostap_interface *iface; | |
| local_info_t *local; | |
| int i; | |
| struct lib80211_crypt_data **crypt; | |
| iface = netdev_priv(dev); | |
| local = iface->local; | |
| i = erq->flags & IW_ENCODE_INDEX; | |
| if (i < 1 || i > 4) | |
| i = local->crypt_info.tx_keyidx; | |
| else | |
| i--; | |
| if (i < 0 || i >= WEP_KEYS) | |
| return -EINVAL; | |
| crypt = &local->crypt_info.crypt[i]; | |
| if (erq->flags & IW_ENCODE_DISABLED) { | |
| if (*crypt) | |
| lib80211_crypt_delayed_deinit(&local->crypt_info, crypt); | |
| goto done; | |
| } | |
| if (*crypt != NULL && (*crypt)->ops != NULL && | |
| strcmp((*crypt)->ops->name, "WEP") != 0) { | |
| /* changing to use WEP; deinit previously used algorithm */ | |
| lib80211_crypt_delayed_deinit(&local->crypt_info, crypt); | |
| } | |
| if (*crypt == NULL) { | |
| struct lib80211_crypt_data *new_crypt; | |
| /* take WEP into use */ | |
| new_crypt = kzalloc(sizeof(struct lib80211_crypt_data), | |
| GFP_KERNEL); | |
| if (new_crypt == NULL) | |
| return -ENOMEM; | |
| new_crypt->ops = lib80211_get_crypto_ops("WEP"); | |
| if (!new_crypt->ops) { | |
| request_module("lib80211_crypt_wep"); | |
| new_crypt->ops = lib80211_get_crypto_ops("WEP"); | |
| } | |
| if (new_crypt->ops && try_module_get(new_crypt->ops->owner)) | |
| new_crypt->priv = new_crypt->ops->init(i); | |
| if (!new_crypt->ops || !new_crypt->priv) { | |
| kfree(new_crypt); | |
| new_crypt = NULL; | |
| printk(KERN_WARNING "%s: could not initialize WEP: " | |
| "load module hostap_crypt_wep.o\n", | |
| dev->name); | |
| return -EOPNOTSUPP; | |
| } | |
| *crypt = new_crypt; | |
| } | |
| if (erq->length > 0) { | |
| int len = erq->length <= 5 ? 5 : 13; | |
| int first = 1, j; | |
| if (len > erq->length) | |
| memset(keybuf + erq->length, 0, len - erq->length); | |
| (*crypt)->ops->set_key(keybuf, len, NULL, (*crypt)->priv); | |
| for (j = 0; j < WEP_KEYS; j++) { | |
| if (j != i && local->crypt_info.crypt[j]) { | |
| first = 0; | |
| break; | |
| } | |
| } | |
| if (first) | |
| local->crypt_info.tx_keyidx = i; | |
| } else { | |
| /* No key data - just set the default TX key index */ | |
| local->crypt_info.tx_keyidx = i; | |
| } | |
| done: | |
| local->open_wep = erq->flags & IW_ENCODE_OPEN; | |
| if (hostap_set_encryption(local)) { | |
| printk(KERN_DEBUG "%s: set_encryption failed\n", dev->name); | |
| return -EINVAL; | |
| } | |
| /* Do not reset port0 if card is in Managed mode since resetting will | |
| * generate new IEEE 802.11 authentication which may end up in looping | |
| * with IEEE 802.1X. Prism2 documentation seem to require port reset | |
| * after WEP configuration. However, keys are apparently changed at | |
| * least in Managed mode. */ | |
| if (local->iw_mode != IW_MODE_INFRA && local->func->reset_port(dev)) { | |
| printk(KERN_DEBUG "%s: reset_port failed\n", dev->name); | |
| return -EINVAL; | |
| } | |
| return 0; | |
| } | |
| static int prism2_ioctl_giwencode(struct net_device *dev, | |
| struct iw_request_info *info, | |
| struct iw_point *erq, char *key) | |
| { | |
| struct hostap_interface *iface; | |
| local_info_t *local; | |
| int i, len; | |
| u16 val; | |
| struct lib80211_crypt_data *crypt; | |
| iface = netdev_priv(dev); | |
| local = iface->local; | |
| i = erq->flags & IW_ENCODE_INDEX; | |
| if (i < 1 || i > 4) | |
| i = local->crypt_info.tx_keyidx; | |
| else | |
| i--; | |
| if (i < 0 || i >= WEP_KEYS) | |
| return -EINVAL; | |
| crypt = local->crypt_info.crypt[i]; | |
| erq->flags = i + 1; | |
| if (crypt == NULL || crypt->ops == NULL) { | |
| erq->length = 0; | |
| erq->flags |= IW_ENCODE_DISABLED; | |
| return 0; | |
| } | |
| if (strcmp(crypt->ops->name, "WEP") != 0) { | |
| /* only WEP is supported with wireless extensions, so just | |
| * report that encryption is used */ | |
| erq->length = 0; | |
| erq->flags |= IW_ENCODE_ENABLED; | |
| return 0; | |
| } | |
| /* Reads from HFA384X_RID_CNFDEFAULTKEY* return bogus values, so show | |
| * the keys from driver buffer */ | |
| len = crypt->ops->get_key(key, WEP_KEY_LEN, NULL, crypt->priv); | |
| erq->length = (len >= 0 ? len : 0); | |
| if (local->func->get_rid(dev, HFA384X_RID_CNFWEPFLAGS, &val, 2, 1) < 0) | |
| { | |
| printk("CNFWEPFLAGS reading failed\n"); | |
| return -EOPNOTSUPP; | |
| } | |
| le16_to_cpus(&val); | |
| if (val & HFA384X_WEPFLAGS_PRIVACYINVOKED) | |
| erq->flags |= IW_ENCODE_ENABLED; | |
| else | |
| erq->flags |= IW_ENCODE_DISABLED; | |
| if (val & HFA384X_WEPFLAGS_EXCLUDEUNENCRYPTED) | |
| erq->flags |= IW_ENCODE_RESTRICTED; | |
| else | |
| erq->flags |= IW_ENCODE_OPEN; | |
| return 0; | |
| } | |
| static int hostap_set_rate(struct net_device *dev) | |
| { | |
| struct hostap_interface *iface; | |
| local_info_t *local; | |
| int ret, basic_rates; | |
| iface = netdev_priv(dev); | |
| local = iface->local; | |
| basic_rates = local->basic_rates & local->tx_rate_control; | |
| if (!basic_rates || basic_rates != local->basic_rates) { | |
| printk(KERN_INFO "%s: updating basic rate set automatically " | |
| "to match with the new supported rate set\n", | |
| dev->name); | |
| if (!basic_rates) | |
| basic_rates = local->tx_rate_control; | |
| local->basic_rates = basic_rates; | |
| if (hostap_set_word(dev, HFA384X_RID_CNFBASICRATES, | |
| basic_rates)) | |
| printk(KERN_WARNING "%s: failed to set " | |
| "cnfBasicRates\n", dev->name); | |
| } | |
| ret = (hostap_set_word(dev, HFA384X_RID_TXRATECONTROL, | |
| local->tx_rate_control) || | |
| hostap_set_word(dev, HFA384X_RID_CNFSUPPORTEDRATES, | |
| local->tx_rate_control) || | |
| local->func->reset_port(dev)); | |
| if (ret) { | |
| printk(KERN_WARNING "%s: TXRateControl/cnfSupportedRates " | |
| "setting to 0x%x failed\n", | |
| dev->name, local->tx_rate_control); | |
| } | |
| /* Update TX rate configuration for all STAs based on new operational | |
| * rate set. */ | |
| hostap_update_rates(local); | |
| return ret; | |
| } | |
| static int prism2_ioctl_siwrate(struct net_device *dev, | |
| struct iw_request_info *info, | |
| struct iw_param *rrq, char *extra) | |
| { | |
| struct hostap_interface *iface; | |
| local_info_t *local; | |
| iface = netdev_priv(dev); | |
| local = iface->local; | |
| if (rrq->fixed) { | |
| switch (rrq->value) { | |
| case 11000000: | |
| local->tx_rate_control = HFA384X_RATES_11MBPS; | |
| break; | |
| case 5500000: | |
| local->tx_rate_control = HFA384X_RATES_5MBPS; | |
| break; | |
| case 2000000: | |
| local->tx_rate_control = HFA384X_RATES_2MBPS; | |
| break; | |
| case 1000000: | |
| local->tx_rate_control = HFA384X_RATES_1MBPS; | |
| break; | |
| default: | |
| local->tx_rate_control = HFA384X_RATES_1MBPS | | |
| HFA384X_RATES_2MBPS | HFA384X_RATES_5MBPS | | |
| HFA384X_RATES_11MBPS; | |
| break; | |
| } | |
| } else { | |
| switch (rrq->value) { | |
| case 11000000: | |
| local->tx_rate_control = HFA384X_RATES_1MBPS | | |
| HFA384X_RATES_2MBPS | HFA384X_RATES_5MBPS | | |
| HFA384X_RATES_11MBPS; | |
| break; | |
| case 5500000: | |
| local->tx_rate_control = HFA384X_RATES_1MBPS | | |
| HFA384X_RATES_2MBPS | HFA384X_RATES_5MBPS; | |
| break; | |
| case 2000000: | |
| local->tx_rate_control = HFA384X_RATES_1MBPS | | |
| HFA384X_RATES_2MBPS; | |
| break; | |
| case 1000000: | |
| local->tx_rate_control = HFA384X_RATES_1MBPS; | |
| break; | |
| default: | |
| local->tx_rate_control = HFA384X_RATES_1MBPS | | |
| HFA384X_RATES_2MBPS | HFA384X_RATES_5MBPS | | |
| HFA384X_RATES_11MBPS; | |
| break; | |
| } | |
| } | |
| return hostap_set_rate(dev); | |
| } | |
| static int prism2_ioctl_giwrate(struct net_device *dev, | |
| struct iw_request_info *info, | |
| struct iw_param *rrq, char *extra) | |
| { | |
| u16 val; | |
| struct hostap_interface *iface; | |
| local_info_t *local; | |
| int ret = 0; | |
| iface = netdev_priv(dev); | |
| local = iface->local; | |
| if (local->func->get_rid(dev, HFA384X_RID_TXRATECONTROL, &val, 2, 1) < | |
| 0) | |
| return -EINVAL; | |
| if ((val & 0x1) && (val > 1)) | |
| rrq->fixed = 0; | |
| else | |
| rrq->fixed = 1; | |
| if (local->iw_mode == IW_MODE_MASTER && local->ap != NULL && | |
| !local->fw_tx_rate_control) { | |
| /* HFA384X_RID_CURRENTTXRATE seems to always be 2 Mbps in | |
| * Host AP mode, so use the recorded TX rate of the last sent | |
| * frame */ | |
| rrq->value = local->ap->last_tx_rate > 0 ? | |
| local->ap->last_tx_rate * 100000 : 11000000; | |
| return 0; | |
| } | |
| if (local->func->get_rid(dev, HFA384X_RID_CURRENTTXRATE, &val, 2, 1) < | |
| 0) | |
| return -EINVAL; | |
| switch (val) { | |
| case HFA384X_RATES_1MBPS: | |
| rrq->value = 1000000; | |
| break; | |
| case HFA384X_RATES_2MBPS: | |
| rrq->value = 2000000; | |
| break; | |
| case HFA384X_RATES_5MBPS: | |
| rrq->value = 5500000; | |
| break; | |
| case HFA384X_RATES_11MBPS: | |
| rrq->value = 11000000; | |
| break; | |
| default: | |
| /* should not happen */ | |
| rrq->value = 11000000; | |
| ret = -EINVAL; | |
| break; | |
| } | |
| return ret; | |
| } | |
| static int prism2_ioctl_siwsens(struct net_device *dev, | |
| struct iw_request_info *info, | |
| struct iw_param *sens, char *extra) | |
| { | |
| struct hostap_interface *iface; | |
| local_info_t *local; | |
| iface = netdev_priv(dev); | |
| local = iface->local; | |
| /* Set the desired AP density */ | |
| if (sens->value < 1 || sens->value > 3) | |
| return -EINVAL; | |
| if (hostap_set_word(dev, HFA384X_RID_CNFSYSTEMSCALE, sens->value) || | |
| local->func->reset_port(dev)) | |
| return -EINVAL; | |
| return 0; | |
| } | |
| static int prism2_ioctl_giwsens(struct net_device *dev, | |
| struct iw_request_info *info, | |
| struct iw_param *sens, char *extra) | |
| { | |
| struct hostap_interface *iface; | |
| local_info_t *local; | |
| __le16 val; | |
| iface = netdev_priv(dev); | |
| local = iface->local; | |
| /* Get the current AP density */ | |
| if (local->func->get_rid(dev, HFA384X_RID_CNFSYSTEMSCALE, &val, 2, 1) < | |
| 0) | |
| return -EINVAL; | |
| sens->value = le16_to_cpu(val); | |
| sens->fixed = 1; | |
| return 0; | |
| } | |
| /* Deprecated in new wireless extension API */ | |
| static int prism2_ioctl_giwaplist(struct net_device *dev, | |
| struct iw_request_info *info, | |
| struct iw_point *data, char *extra) | |
| { | |
| struct hostap_interface *iface; | |
| local_info_t *local; | |
| struct sockaddr *addr; | |
| struct iw_quality *qual; | |
| iface = netdev_priv(dev); | |
| local = iface->local; | |
| if (local->iw_mode != IW_MODE_MASTER) { | |
| printk(KERN_DEBUG "SIOCGIWAPLIST is currently only supported " | |
| "in Host AP mode\n"); | |
| data->length = 0; | |
| return -EOPNOTSUPP; | |
| } | |
| addr = kmalloc(sizeof(struct sockaddr) * IW_MAX_AP, GFP_KERNEL); | |
| qual = kmalloc(sizeof(struct iw_quality) * IW_MAX_AP, GFP_KERNEL); | |
| if (addr == NULL || qual == NULL) { | |
| kfree(addr); | |
| kfree(qual); | |
| data->length = 0; | |
| return -ENOMEM; | |
| } | |
| data->length = prism2_ap_get_sta_qual(local, addr, qual, IW_MAX_AP, 1); | |
| memcpy(extra, addr, sizeof(struct sockaddr) * data->length); | |
| data->flags = 1; /* has quality information */ | |
| memcpy(extra + sizeof(struct sockaddr) * data->length, qual, | |
| sizeof(struct iw_quality) * data->length); | |
| kfree(addr); | |
| kfree(qual); | |
| return 0; | |
| } | |
| static int prism2_ioctl_siwrts(struct net_device *dev, | |
| struct iw_request_info *info, | |
| struct iw_param *rts, char *extra) | |
| { | |
| struct hostap_interface *iface; | |
| local_info_t *local; | |
| __le16 val; | |
| iface = netdev_priv(dev); | |
| local = iface->local; | |
| if (rts->disabled) | |
| val = cpu_to_le16(2347); | |
| else if (rts->value < 0 || rts->value > 2347) | |
| return -EINVAL; | |
| else | |
| val = cpu_to_le16(rts->value); | |
| if (local->func->set_rid(dev, HFA384X_RID_RTSTHRESHOLD, &val, 2) || | |
| local->func->reset_port(dev)) | |
| return -EINVAL; | |
| local->rts_threshold = rts->value; | |
| return 0; | |
| } | |
| static int prism2_ioctl_giwrts(struct net_device *dev, | |
| struct iw_request_info *info, | |
| struct iw_param *rts, char *extra) | |
| { | |
| struct hostap_interface *iface; | |
| local_info_t *local; | |
| __le16 val; | |
| iface = netdev_priv(dev); | |
| local = iface->local; | |
| if (local->func->get_rid(dev, HFA384X_RID_RTSTHRESHOLD, &val, 2, 1) < | |
| 0) | |
| return -EINVAL; | |
| rts->value = le16_to_cpu(val); | |
| rts->disabled = (rts->value == 2347); | |
| rts->fixed = 1; | |
| return 0; | |
| } | |
| static int prism2_ioctl_siwfrag(struct net_device *dev, | |
| struct iw_request_info *info, | |
| struct iw_param *rts, char *extra) | |
| { | |
| struct hostap_interface *iface; | |
| local_info_t *local; | |
| __le16 val; | |
| iface = netdev_priv(dev); | |
| local = iface->local; | |
| if (rts->disabled) | |
| val = cpu_to_le16(2346); | |
| else if (rts->value < 256 || rts->value > 2346) | |
| return -EINVAL; | |
| else | |
| val = cpu_to_le16(rts->value & ~0x1); /* even numbers only */ | |
| local->fragm_threshold = rts->value & ~0x1; | |
| if (local->func->set_rid(dev, HFA384X_RID_FRAGMENTATIONTHRESHOLD, &val, | |
| 2) | |
| || local->func->reset_port(dev)) | |
| return -EINVAL; | |
| return 0; | |
| } | |
| static int prism2_ioctl_giwfrag(struct net_device *dev, | |
| struct iw_request_info *info, | |
| struct iw_param *rts, char *extra) | |
| { | |
| struct hostap_interface *iface; | |
| local_info_t *local; | |
| __le16 val; | |
| iface = netdev_priv(dev); | |
| local = iface->local; | |
| if (local->func->get_rid(dev, HFA384X_RID_FRAGMENTATIONTHRESHOLD, | |
| &val, 2, 1) < 0) | |
| return -EINVAL; | |
| rts->value = le16_to_cpu(val); | |
| rts->disabled = (rts->value == 2346); | |
| rts->fixed = 1; | |
| return 0; | |
| } | |
| #ifndef PRISM2_NO_STATION_MODES | |
| static int hostap_join_ap(struct net_device *dev) | |
| { | |
| struct hostap_interface *iface; | |
| local_info_t *local; | |
| struct hfa384x_join_request req; | |
| unsigned long flags; | |
| int i; | |
| struct hfa384x_hostscan_result *entry; | |
| iface = netdev_priv(dev); | |
| local = iface->local; | |
| memcpy(req.bssid, local->preferred_ap, ETH_ALEN); | |
| req.channel = 0; | |
| spin_lock_irqsave(&local->lock, flags); | |
| for (i = 0; i < local->last_scan_results_count; i++) { | |
| if (!local->last_scan_results) | |
| break; | |
| entry = &local->last_scan_results[i]; | |
| if (ether_addr_equal(local->preferred_ap, entry->bssid)) { | |
| req.channel = entry->chid; | |
| break; | |
| } | |
| } | |
| spin_unlock_irqrestore(&local->lock, flags); | |
| if (local->func->set_rid(dev, HFA384X_RID_JOINREQUEST, &req, | |
| sizeof(req))) { | |
| printk(KERN_DEBUG "%s: JoinRequest %pM failed\n", | |
| dev->name, local->preferred_ap); | |
| return -1; | |
| } | |
| printk(KERN_DEBUG "%s: Trying to join BSSID %pM\n", | |
| dev->name, local->preferred_ap); | |
| return 0; | |
| } | |
| #endif /* PRISM2_NO_STATION_MODES */ | |
| static int prism2_ioctl_siwap(struct net_device *dev, | |
| struct iw_request_info *info, | |
| struct sockaddr *ap_addr, char *extra) | |
| { | |
| #ifdef PRISM2_NO_STATION_MODES | |
| return -EOPNOTSUPP; | |
| #else /* PRISM2_NO_STATION_MODES */ | |
| struct hostap_interface *iface; | |
| local_info_t *local; | |
| iface = netdev_priv(dev); | |
| local = iface->local; | |
| memcpy(local->preferred_ap, &ap_addr->sa_data, ETH_ALEN); | |
| if (local->host_roaming == 1 && local->iw_mode == IW_MODE_INFRA) { | |
| struct hfa384x_scan_request scan_req; | |
| memset(&scan_req, 0, sizeof(scan_req)); | |
| scan_req.channel_list = cpu_to_le16(0x3fff); | |
| scan_req.txrate = cpu_to_le16(HFA384X_RATES_1MBPS); | |
| if (local->func->set_rid(dev, HFA384X_RID_SCANREQUEST, | |
| &scan_req, sizeof(scan_req))) { | |
| printk(KERN_DEBUG "%s: ScanResults request failed - " | |
| "preferred AP delayed to next unsolicited " | |
| "scan\n", dev->name); | |
| } | |
| } else if (local->host_roaming == 2 && | |
| local->iw_mode == IW_MODE_INFRA) { | |
| if (hostap_join_ap(dev)) | |
| return -EINVAL; | |
| } else { | |
| printk(KERN_DEBUG "%s: Preferred AP (SIOCSIWAP) is used only " | |
| "in Managed mode when host_roaming is enabled\n", | |
| dev->name); | |
| } | |
| return 0; | |
| #endif /* PRISM2_NO_STATION_MODES */ | |
| } | |
| static int prism2_ioctl_giwap(struct net_device *dev, | |
| struct iw_request_info *info, | |
| struct sockaddr *ap_addr, char *extra) | |
| { | |
| struct hostap_interface *iface; | |
| local_info_t *local; | |
| iface = netdev_priv(dev); | |
| local = iface->local; | |
| ap_addr->sa_family = ARPHRD_ETHER; | |
| switch (iface->type) { | |
| case HOSTAP_INTERFACE_AP: | |
| memcpy(&ap_addr->sa_data, dev->dev_addr, ETH_ALEN); | |
| break; | |
| case HOSTAP_INTERFACE_STA: | |
| memcpy(&ap_addr->sa_data, local->assoc_ap_addr, ETH_ALEN); | |
| break; | |
| case HOSTAP_INTERFACE_WDS: | |
| memcpy(&ap_addr->sa_data, iface->u.wds.remote_addr, ETH_ALEN); | |
| break; | |
| default: | |
| if (local->func->get_rid(dev, HFA384X_RID_CURRENTBSSID, | |
| &ap_addr->sa_data, ETH_ALEN, 1) < 0) | |
| return -EOPNOTSUPP; | |
| /* local->bssid is also updated in LinkStatus handler when in | |
| * station mode */ | |
| memcpy(local->bssid, &ap_addr->sa_data, ETH_ALEN); | |
| break; | |
| } | |
| return 0; | |
| } | |
| static int prism2_ioctl_siwnickn(struct net_device *dev, | |
| struct iw_request_info *info, | |
| struct iw_point *data, char *nickname) | |
| { | |
| struct hostap_interface *iface; | |
| local_info_t *local; | |
| iface = netdev_priv(dev); | |
| local = iface->local; | |
| memset(local->name, 0, sizeof(local->name)); | |
| memcpy(local->name, nickname, data->length); | |
| local->name_set = 1; | |
| if (hostap_set_string(dev, HFA384X_RID_CNFOWNNAME, local->name) || | |
| local->func->reset_port(dev)) | |
| return -EINVAL; | |
| return 0; | |
| } | |
| static int prism2_ioctl_giwnickn(struct net_device *dev, | |
| struct iw_request_info *info, | |
| struct iw_point *data, char *nickname) | |
| { | |
| struct hostap_interface *iface; | |
| local_info_t *local; | |
| int len; | |
| char name[MAX_NAME_LEN + 3]; | |
| u16 val; | |
| iface = netdev_priv(dev); | |
| local = iface->local; | |
| len = local->func->get_rid(dev, HFA384X_RID_CNFOWNNAME, | |
| &name, MAX_NAME_LEN + 2, 0); | |
| val = le16_to_cpu(*(__le16 *) name); | |
| if (len > MAX_NAME_LEN + 2 || len < 0 || val > MAX_NAME_LEN) | |
| return -EOPNOTSUPP; | |
| name[val + 2] = '\0'; | |
| data->length = val + 1; | |
| memcpy(nickname, name + 2, val + 1); | |
| return 0; | |
| } | |
| static int prism2_ioctl_siwfreq(struct net_device *dev, | |
| struct iw_request_info *info, | |
| struct iw_freq *freq, char *extra) | |
| { | |
| struct hostap_interface *iface; | |
| local_info_t *local; | |
| iface = netdev_priv(dev); | |
| local = iface->local; | |
| /* freq => chan. */ | |
| if (freq->e == 1 && | |
| freq->m / 100000 >= freq_list[0] && | |
| freq->m / 100000 <= freq_list[FREQ_COUNT - 1]) { | |
| int ch; | |
| int fr = freq->m / 100000; | |
| for (ch = 0; ch < FREQ_COUNT; ch++) { | |
| if (fr == freq_list[ch]) { | |
| freq->e = 0; | |
| freq->m = ch + 1; | |
| break; | |
| } | |
| } | |
| } | |
| if (freq->e != 0 || freq->m < 1 || freq->m > FREQ_COUNT || | |
| !(local->channel_mask & (1 << (freq->m - 1)))) | |
| return -EINVAL; | |
| local->channel = freq->m; /* channel is used in prism2_setup_rids() */ | |
| if (hostap_set_word(dev, HFA384X_RID_CNFOWNCHANNEL, local->channel) || | |
| local->func->reset_port(dev)) | |
| return -EINVAL; | |
| return 0; | |
| } | |
| static int prism2_ioctl_giwfreq(struct net_device *dev, | |
| struct iw_request_info *info, | |
| struct iw_freq *freq, char *extra) | |
| { | |
| struct hostap_interface *iface; | |
| local_info_t *local; | |
| u16 val; | |
| iface = netdev_priv(dev); | |
| local = iface->local; | |
| if (local->func->get_rid(dev, HFA384X_RID_CURRENTCHANNEL, &val, 2, 1) < | |
| 0) | |
| return -EINVAL; | |
| le16_to_cpus(&val); | |
| if (val < 1 || val > FREQ_COUNT) | |
| return -EINVAL; | |
| freq->m = freq_list[val - 1] * 100000; | |
| freq->e = 1; | |
| return 0; | |
| } | |
| static void hostap_monitor_set_type(local_info_t *local) | |
| { | |
| struct net_device *dev = local->ddev; | |
| if (dev == NULL) | |
| return; | |
| if (local->monitor_type == PRISM2_MONITOR_PRISM || | |
| local->monitor_type == PRISM2_MONITOR_CAPHDR) { | |
| dev->type = ARPHRD_IEEE80211_PRISM; | |
| } else if (local->monitor_type == PRISM2_MONITOR_RADIOTAP) { | |
| dev->type = ARPHRD_IEEE80211_RADIOTAP; | |
| } else { | |
| dev->type = ARPHRD_IEEE80211; | |
| } | |
| } | |
| static int prism2_ioctl_siwessid(struct net_device *dev, | |
| struct iw_request_info *info, | |
| struct iw_point *data, char *ssid) | |
| { | |
| struct hostap_interface *iface; | |
| local_info_t *local; | |
| iface = netdev_priv(dev); | |
| local = iface->local; | |
| if (iface->type == HOSTAP_INTERFACE_WDS) | |
| return -EOPNOTSUPP; | |
| if (data->flags == 0) | |
| ssid[0] = '\0'; /* ANY */ | |
| if (local->iw_mode == IW_MODE_MASTER && ssid[0] == '\0') { | |
| /* Setting SSID to empty string seems to kill the card in | |
| * Host AP mode */ | |
| printk(KERN_DEBUG "%s: Host AP mode does not support " | |
| "'Any' essid\n", dev->name); | |
| return -EINVAL; | |
| } | |
| memcpy(local->essid, ssid, data->length); | |
| local->essid[data->length] = '\0'; | |
| if ((!local->fw_ap && | |
| hostap_set_string(dev, HFA384X_RID_CNFDESIREDSSID, local->essid)) | |
| || hostap_set_string(dev, HFA384X_RID_CNFOWNSSID, local->essid) || | |
| local->func->reset_port(dev)) | |
| return -EINVAL; | |
| return 0; | |
| } | |
| static int prism2_ioctl_giwessid(struct net_device *dev, | |
| struct iw_request_info *info, | |
| struct iw_point *data, char *essid) | |
| { | |
| struct hostap_interface *iface; | |
| local_info_t *local; | |
| u16 val; | |
| iface = netdev_priv(dev); | |
| local = iface->local; | |
| if (iface->type == HOSTAP_INTERFACE_WDS) | |
| return -EOPNOTSUPP; | |
| data->flags = 1; /* active */ | |
| if (local->iw_mode == IW_MODE_MASTER) { | |
| data->length = strlen(local->essid); | |
| memcpy(essid, local->essid, IW_ESSID_MAX_SIZE); | |
| } else { | |
| int len; | |
| char ssid[MAX_SSID_LEN + 2]; | |
| memset(ssid, 0, sizeof(ssid)); | |
| len = local->func->get_rid(dev, HFA384X_RID_CURRENTSSID, | |
| &ssid, MAX_SSID_LEN + 2, 0); | |
| val = le16_to_cpu(*(__le16 *) ssid); | |
| if (len > MAX_SSID_LEN + 2 || len < 0 || val > MAX_SSID_LEN) { | |
| return -EOPNOTSUPP; | |
| } | |
| data->length = val; | |
| memcpy(essid, ssid + 2, IW_ESSID_MAX_SIZE); | |
| } | |
| return 0; | |
| } | |
| static int prism2_ioctl_giwrange(struct net_device *dev, | |
| struct iw_request_info *info, | |
| struct iw_point *data, char *extra) | |
| { | |
| struct hostap_interface *iface; | |
| local_info_t *local; | |
| struct iw_range *range = (struct iw_range *) extra; | |
| u8 rates[10]; | |
| u16 val; | |
| int i, len, over2; | |
| iface = netdev_priv(dev); | |
| local = iface->local; | |
| data->length = sizeof(struct iw_range); | |
| memset(range, 0, sizeof(struct iw_range)); | |
| /* TODO: could fill num_txpower and txpower array with | |
| * something; however, there are 128 different values.. */ | |
| range->txpower_capa = IW_TXPOW_DBM; | |
| if (local->iw_mode == IW_MODE_INFRA || local->iw_mode == IW_MODE_ADHOC) | |
| { | |
| range->min_pmp = 1 * 1024; | |
| range->max_pmp = 65535 * 1024; | |
| range->min_pmt = 1 * 1024; | |
| range->max_pmt = 1000 * 1024; | |
| range->pmp_flags = IW_POWER_PERIOD; | |
| range->pmt_flags = IW_POWER_TIMEOUT; | |
| range->pm_capa = IW_POWER_PERIOD | IW_POWER_TIMEOUT | | |
| IW_POWER_UNICAST_R | IW_POWER_ALL_R; | |
| } | |
| range->we_version_compiled = WIRELESS_EXT; | |
| range->we_version_source = 18; | |
| range->retry_capa = IW_RETRY_LIMIT; | |
| range->retry_flags = IW_RETRY_LIMIT; | |
| range->min_retry = 0; | |
| range->max_retry = 255; | |
| range->num_channels = FREQ_COUNT; | |
| val = 0; | |
| for (i = 0; i < FREQ_COUNT; i++) { | |
| if (local->channel_mask & (1 << i)) { | |
| range->freq[val].i = i + 1; | |
| range->freq[val].m = freq_list[i] * 100000; | |
| range->freq[val].e = 1; | |
| val++; | |
| } | |
| if (val == IW_MAX_FREQUENCIES) | |
| break; | |
| } | |
| range->num_frequency = val; | |
| if (local->sta_fw_ver >= PRISM2_FW_VER(1,3,1)) { | |
| range->max_qual.qual = 70; /* what is correct max? This was not | |
| * documented exactly. At least | |
| * 69 has been observed. */ | |
| range->max_qual.level = 0; /* dB */ | |
| range->max_qual.noise = 0; /* dB */ | |
| /* What would be suitable values for "average/typical" qual? */ | |
| range->avg_qual.qual = 20; | |
| range->avg_qual.level = -60; | |
| range->avg_qual.noise = -95; | |
| } else { | |
| range->max_qual.qual = 92; /* 0 .. 92 */ | |
| range->max_qual.level = 154; /* 27 .. 154 */ | |
| range->max_qual.noise = 154; /* 27 .. 154 */ | |
| } | |
| range->sensitivity = 3; | |
| range->max_encoding_tokens = WEP_KEYS; | |
| range->num_encoding_sizes = 2; | |
| range->encoding_size[0] = 5; | |
| range->encoding_size[1] = 13; | |
| over2 = 0; | |
| len = prism2_get_datarates(dev, rates); | |
| range->num_bitrates = 0; | |
| for (i = 0; i < len; i++) { | |
| if (range->num_bitrates < IW_MAX_BITRATES) { | |
| range->bitrate[range->num_bitrates] = | |
| rates[i] * 500000; | |
| range->num_bitrates++; | |
| } | |
| if (rates[i] == 0x0b || rates[i] == 0x16) | |
| over2 = 1; | |
| } | |
| /* estimated maximum TCP throughput values (bps) */ | |
| range->throughput = over2 ? 5500000 : 1500000; | |
| range->min_rts = 0; | |
| range->max_rts = 2347; | |
| range->min_frag = 256; | |
| range->max_frag = 2346; | |
| /* Event capability (kernel + driver) */ | |
| range->event_capa[0] = (IW_EVENT_CAPA_K_0 | | |
| IW_EVENT_CAPA_MASK(SIOCGIWTHRSPY) | | |
| IW_EVENT_CAPA_MASK(SIOCGIWAP) | | |
| IW_EVENT_CAPA_MASK(SIOCGIWSCAN)); | |
| range->event_capa[1] = IW_EVENT_CAPA_K_1; | |
| range->event_capa[4] = (IW_EVENT_CAPA_MASK(IWEVTXDROP) | | |
| IW_EVENT_CAPA_MASK(IWEVCUSTOM) | | |
| IW_EVENT_CAPA_MASK(IWEVREGISTERED) | | |
| IW_EVENT_CAPA_MASK(IWEVEXPIRED)); | |
| range->enc_capa = IW_ENC_CAPA_WPA | IW_ENC_CAPA_WPA2 | | |
| IW_ENC_CAPA_CIPHER_TKIP | IW_ENC_CAPA_CIPHER_CCMP; | |
| if (local->sta_fw_ver >= PRISM2_FW_VER(1,3,1)) | |
| range->scan_capa = IW_SCAN_CAPA_ESSID; | |
| return 0; | |
| } | |
| static int hostap_monitor_mode_enable(local_info_t *local) | |
| { | |
| struct net_device *dev = local->dev; | |
| printk(KERN_DEBUG "Enabling monitor mode\n"); | |
| hostap_monitor_set_type(local); | |
| if (hostap_set_word(dev, HFA384X_RID_CNFPORTTYPE, | |
| HFA384X_PORTTYPE_PSEUDO_IBSS)) { | |
| printk(KERN_DEBUG "Port type setting for monitor mode " | |
| "failed\n"); | |
| return -EOPNOTSUPP; | |
| } | |
| /* Host decrypt is needed to get the IV and ICV fields; | |
| * however, monitor mode seems to remove WEP flag from frame | |
| * control field */ | |
| if (hostap_set_word(dev, HFA384X_RID_CNFWEPFLAGS, | |
| HFA384X_WEPFLAGS_HOSTENCRYPT | | |
| HFA384X_WEPFLAGS_HOSTDECRYPT)) { | |
| printk(KERN_DEBUG "WEP flags setting failed\n"); | |
| return -EOPNOTSUPP; | |
| } | |
| if (local->func->reset_port(dev) || | |
| local->func->cmd(dev, HFA384X_CMDCODE_TEST | | |
| (HFA384X_TEST_MONITOR << 8), | |
| 0, NULL, NULL)) { | |
| printk(KERN_DEBUG "Setting monitor mode failed\n"); | |
| return -EOPNOTSUPP; | |
| } | |
| return 0; | |
| } | |
| static int hostap_monitor_mode_disable(local_info_t *local) | |
| { | |
| struct net_device *dev = local->ddev; | |
| if (dev == NULL) | |
| return -1; | |
| printk(KERN_DEBUG "%s: Disabling monitor mode\n", dev->name); | |
| dev->type = ARPHRD_ETHER; | |
| if (local->func->cmd(dev, HFA384X_CMDCODE_TEST | | |
| (HFA384X_TEST_STOP << 8), | |
| 0, NULL, NULL)) | |
| return -1; | |
| return hostap_set_encryption(local); | |
| } | |
| static int prism2_ioctl_siwmode(struct net_device *dev, | |
| struct iw_request_info *info, | |
| __u32 *mode, char *extra) | |
| { | |
| struct hostap_interface *iface; | |
| local_info_t *local; | |
| int double_reset = 0; | |
| iface = netdev_priv(dev); | |
| local = iface->local; | |
| if (*mode != IW_MODE_ADHOC && *mode != IW_MODE_INFRA && | |
| *mode != IW_MODE_MASTER && *mode != IW_MODE_REPEAT && | |
| *mode != IW_MODE_MONITOR) | |
| return -EOPNOTSUPP; | |
| #ifdef PRISM2_NO_STATION_MODES | |
| if (*mode == IW_MODE_ADHOC || *mode == IW_MODE_INFRA) | |
| return -EOPNOTSUPP; | |
| #endif /* PRISM2_NO_STATION_MODES */ | |
| if (*mode == local->iw_mode) | |
| return 0; | |
| if (*mode == IW_MODE_MASTER && local->essid[0] == '\0') { | |
| printk(KERN_WARNING "%s: empty SSID not allowed in Master " | |
| "mode\n", dev->name); | |
| return -EINVAL; | |
| } | |
| if (local->iw_mode == IW_MODE_MONITOR) | |
| hostap_monitor_mode_disable(local); | |
| if ((local->iw_mode == IW_MODE_ADHOC || | |
| local->iw_mode == IW_MODE_MONITOR) && *mode == IW_MODE_MASTER) { | |
| /* There seems to be a firmware bug in at least STA f/w v1.5.6 | |
| * that leaves beacon frames to use IBSS type when moving from | |
| * IBSS to Host AP mode. Doing double Port0 reset seems to be | |
| * enough to workaround this. */ | |
| double_reset = 1; | |
| } | |
| printk(KERN_DEBUG "prism2: %s: operating mode changed " | |
| "%d -> %d\n", dev->name, local->iw_mode, *mode); | |
| local->iw_mode = *mode; | |
| if (local->iw_mode == IW_MODE_MONITOR) | |
| hostap_monitor_mode_enable(local); | |
| else if (local->iw_mode == IW_MODE_MASTER && !local->host_encrypt && | |
| !local->fw_encrypt_ok) { | |
| printk(KERN_DEBUG "%s: defaulting to host-based encryption as " | |
| "a workaround for firmware bug in Host AP mode WEP\n", | |
| dev->name); | |
| local->host_encrypt = 1; | |
| } | |
| if (hostap_set_word(dev, HFA384X_RID_CNFPORTTYPE, | |
| hostap_get_porttype(local))) | |
| return -EOPNOTSUPP; | |
| if (local->func->reset_port(dev)) | |
| return -EINVAL; | |
| if (double_reset && local->func->reset_port(dev)) | |
| return -EINVAL; | |
| if (local->iw_mode != IW_MODE_INFRA && local->iw_mode != IW_MODE_ADHOC) | |
| { | |
| /* netif_carrier is used only in client modes for now, so make | |
| * sure carrier is on when moving to non-client modes. */ | |
| netif_carrier_on(local->dev); | |
| netif_carrier_on(local->ddev); | |
| } | |
| return 0; | |
| } | |
| static int prism2_ioctl_giwmode(struct net_device *dev, | |
| struct iw_request_info *info, | |
| __u32 *mode, char *extra) | |
| { | |
| struct hostap_interface *iface; | |
| local_info_t *local; | |
| iface = netdev_priv(dev); | |
| local = iface->local; | |
| switch (iface->type) { | |
| case HOSTAP_INTERFACE_STA: | |
| *mode = IW_MODE_INFRA; | |
| break; | |
| case HOSTAP_INTERFACE_WDS: | |
| *mode = IW_MODE_REPEAT; | |
| break; | |
| default: | |
| *mode = local->iw_mode; | |
| break; | |
| } | |
| return 0; | |
| } | |
| static int prism2_ioctl_siwpower(struct net_device *dev, | |
| struct iw_request_info *info, | |
| struct iw_param *wrq, char *extra) | |
| { | |
| #ifdef PRISM2_NO_STATION_MODES | |
| return -EOPNOTSUPP; | |
| #else /* PRISM2_NO_STATION_MODES */ | |
| int ret = 0; | |
| if (wrq->disabled) | |
| return hostap_set_word(dev, HFA384X_RID_CNFPMENABLED, 0); | |
| switch (wrq->flags & IW_POWER_MODE) { | |
| case IW_POWER_UNICAST_R: | |
| ret = hostap_set_word(dev, HFA384X_RID_CNFMULTICASTRECEIVE, 0); | |
| if (ret) | |
| return ret; | |
| ret = hostap_set_word(dev, HFA384X_RID_CNFPMENABLED, 1); | |
| if (ret) | |
| return ret; | |
| break; | |
| case IW_POWER_ALL_R: | |
| ret = hostap_set_word(dev, HFA384X_RID_CNFMULTICASTRECEIVE, 1); | |
| if (ret) | |
| return ret; | |
| ret = hostap_set_word(dev, HFA384X_RID_CNFPMENABLED, 1); | |
| if (ret) | |
| return ret; | |
| break; | |
| case IW_POWER_ON: | |
| break; | |
| default: | |
| return -EINVAL; | |
| } | |
| if (wrq->flags & IW_POWER_TIMEOUT) { | |
| ret = hostap_set_word(dev, HFA384X_RID_CNFPMENABLED, 1); | |
| if (ret) | |
| return ret; | |
| ret = hostap_set_word(dev, HFA384X_RID_CNFPMHOLDOVERDURATION, | |
| wrq->value / 1024); | |
| if (ret) | |
| return ret; | |
| } | |
| if (wrq->flags & IW_POWER_PERIOD) { | |
| ret = hostap_set_word(dev, HFA384X_RID_CNFPMENABLED, 1); | |
| if (ret) | |
| return ret; | |
| ret = hostap_set_word(dev, HFA384X_RID_CNFMAXSLEEPDURATION, | |
| wrq->value / 1024); | |
| if (ret) | |
| return ret; | |
| } | |
| return ret; | |
| #endif /* PRISM2_NO_STATION_MODES */ | |
| } | |
| static int prism2_ioctl_giwpower(struct net_device *dev, | |
| struct iw_request_info *info, | |
| struct iw_param *rrq, char *extra) | |
| { | |
| #ifdef PRISM2_NO_STATION_MODES | |
| return -EOPNOTSUPP; | |
| #else /* PRISM2_NO_STATION_MODES */ | |
| struct hostap_interface *iface; | |
| local_info_t *local; | |
| __le16 enable, mcast; | |
| iface = netdev_priv(dev); | |
| local = iface->local; | |
| if (local->func->get_rid(dev, HFA384X_RID_CNFPMENABLED, &enable, 2, 1) | |
| < 0) | |
| return -EINVAL; | |
| if (!le16_to_cpu(enable)) { | |
| rrq->disabled = 1; | |
| return 0; | |
| } | |
| rrq->disabled = 0; | |
| if ((rrq->flags & IW_POWER_TYPE) == IW_POWER_TIMEOUT) { | |
| __le16 timeout; | |
| if (local->func->get_rid(dev, | |
| HFA384X_RID_CNFPMHOLDOVERDURATION, | |
| &timeout, 2, 1) < 0) | |
| return -EINVAL; | |
| rrq->flags = IW_POWER_TIMEOUT; | |
| rrq->value = le16_to_cpu(timeout) * 1024; | |
| } else { | |
| __le16 period; | |
| if (local->func->get_rid(dev, HFA384X_RID_CNFMAXSLEEPDURATION, | |
| &period, 2, 1) < 0) | |
| return -EINVAL; | |
| rrq->flags = IW_POWER_PERIOD; | |
| rrq->value = le16_to_cpu(period) * 1024; | |
| } | |
| if (local->func->get_rid(dev, HFA384X_RID_CNFMULTICASTRECEIVE, &mcast, | |
| 2, 1) < 0) | |
| return -EINVAL; | |
| if (le16_to_cpu(mcast)) | |
| rrq->flags |= IW_POWER_ALL_R; | |
| else | |
| rrq->flags |= IW_POWER_UNICAST_R; | |
| return 0; | |
| #endif /* PRISM2_NO_STATION_MODES */ | |
| } | |
| static int prism2_ioctl_siwretry(struct net_device *dev, | |
| struct iw_request_info *info, | |
| struct iw_param *rrq, char *extra) | |
| { | |
| struct hostap_interface *iface; | |
| local_info_t *local; | |
| iface = netdev_priv(dev); | |
| local = iface->local; | |
| if (rrq->disabled) | |
| return -EINVAL; | |
| /* setting retry limits is not supported with the current station | |
| * firmware code; simulate this with alternative retry count for now */ | |
| if (rrq->flags == IW_RETRY_LIMIT) { | |
| if (rrq->value < 0) { | |
| /* disable manual retry count setting and use firmware | |
| * defaults */ | |
| local->manual_retry_count = -1; | |
| local->tx_control &= ~HFA384X_TX_CTRL_ALT_RTRY; | |
| } else { | |
| if (hostap_set_word(dev, HFA384X_RID_CNFALTRETRYCOUNT, | |
| rrq->value)) { | |
| printk(KERN_DEBUG "%s: Alternate retry count " | |
| "setting to %d failed\n", | |
| dev->name, rrq->value); | |
| return -EOPNOTSUPP; | |
| } | |
| local->manual_retry_count = rrq->value; | |
| local->tx_control |= HFA384X_TX_CTRL_ALT_RTRY; | |
| } | |
| return 0; | |
| } | |
| return -EOPNOTSUPP; | |
| #if 0 | |
| /* what could be done, if firmware would support this.. */ | |
| if (rrq->flags & IW_RETRY_LIMIT) { | |
| if (rrq->flags & IW_RETRY_LONG) | |
| HFA384X_RID_LONGRETRYLIMIT = rrq->value; | |
| else if (rrq->flags & IW_RETRY_SHORT) | |
| HFA384X_RID_SHORTRETRYLIMIT = rrq->value; | |
| else { | |
| HFA384X_RID_LONGRETRYLIMIT = rrq->value; | |
| HFA384X_RID_SHORTRETRYLIMIT = rrq->value; | |
| } | |
| } | |
| if (rrq->flags & IW_RETRY_LIFETIME) { | |
| HFA384X_RID_MAXTRANSMITLIFETIME = rrq->value / 1024; | |
| } | |
| return 0; | |
| #endif /* 0 */ | |
| } | |
| static int prism2_ioctl_giwretry(struct net_device *dev, | |
| struct iw_request_info *info, | |
| struct iw_param *rrq, char *extra) | |
| { | |
| struct hostap_interface *iface; | |
| local_info_t *local; | |
| __le16 shortretry, longretry, lifetime, altretry; | |
| iface = netdev_priv(dev); | |
| local = iface->local; | |
| if (local->func->get_rid(dev, HFA384X_RID_SHORTRETRYLIMIT, &shortretry, | |
| 2, 1) < 0 || | |
| local->func->get_rid(dev, HFA384X_RID_LONGRETRYLIMIT, &longretry, | |
| 2, 1) < 0 || | |
| local->func->get_rid(dev, HFA384X_RID_MAXTRANSMITLIFETIME, | |
| &lifetime, 2, 1) < 0) | |
| return -EINVAL; | |
| rrq->disabled = 0; | |
| if ((rrq->flags & IW_RETRY_TYPE) == IW_RETRY_LIFETIME) { | |
| rrq->flags = IW_RETRY_LIFETIME; | |
| rrq->value = le16_to_cpu(lifetime) * 1024; | |
| } else { | |
| if (local->manual_retry_count >= 0) { | |
| rrq->flags = IW_RETRY_LIMIT; | |
| if (local->func->get_rid(dev, | |
| HFA384X_RID_CNFALTRETRYCOUNT, | |
| &altretry, 2, 1) >= 0) | |
| rrq->value = le16_to_cpu(altretry); | |
| else | |
| rrq->value = local->manual_retry_count; | |
| } else if ((rrq->flags & IW_RETRY_LONG)) { | |
| rrq->flags = IW_RETRY_LIMIT | IW_RETRY_LONG; | |
| rrq->value = le16_to_cpu(longretry); | |
| } else { | |
| rrq->flags = IW_RETRY_LIMIT; | |
| rrq->value = le16_to_cpu(shortretry); | |
| if (shortretry != longretry) | |
| rrq->flags |= IW_RETRY_SHORT; | |
| } | |
| } | |
| return 0; | |
| } | |
| /* Note! This TX power controlling is experimental and should not be used in | |
| * production use. It just sets raw power register and does not use any kind of | |
| * feedback information from the measured TX power (CR58). This is now | |
| * commented out to make sure that it is not used by accident. TX power | |
| * configuration will be enabled again after proper algorithm using feedback | |
| * has been implemented. */ | |
| #ifdef RAW_TXPOWER_SETTING | |
| /* Map HFA386x's CR31 to and from dBm with some sort of ad hoc mapping.. | |
| * This version assumes following mapping: | |
| * CR31 is 7-bit value with -64 to +63 range. | |
| * -64 is mapped into +20dBm and +63 into -43dBm. | |
| * This is certainly not an exact mapping for every card, but at least | |
| * increasing dBm value should correspond to increasing TX power. | |
| */ | |
| static int prism2_txpower_hfa386x_to_dBm(u16 val) | |
| { | |
| signed char tmp; | |
| if (val > 255) | |
| val = 255; | |
| tmp = val; | |
| tmp >>= 2; | |
| return -12 - tmp; | |
| } | |
| static u16 prism2_txpower_dBm_to_hfa386x(int val) | |
| { | |
| signed char tmp; | |
| if (val > 20) | |
| return 128; | |
| else if (val < -43) | |
| return 127; | |
| tmp = val; | |
| tmp = -12 - tmp; | |
| tmp <<= 2; | |
| return (unsigned char) tmp; | |
| } | |
| #endif /* RAW_TXPOWER_SETTING */ | |
| static int prism2_ioctl_siwtxpow(struct net_device *dev, | |
| struct iw_request_info *info, | |
| struct iw_param *rrq, char *extra) | |
| { | |
| struct hostap_interface *iface; | |
| local_info_t *local; | |
| #ifdef RAW_TXPOWER_SETTING | |
| char *tmp; | |
| #endif | |
| u16 val; | |
| int ret = 0; | |
| iface = netdev_priv(dev); | |
| local = iface->local; | |
| if (rrq->disabled) { | |
| if (local->txpower_type != PRISM2_TXPOWER_OFF) { | |
| val = 0xff; /* use all standby and sleep modes */ | |
| ret = local->func->cmd(dev, HFA384X_CMDCODE_WRITEMIF, | |
| HFA386X_CR_A_D_TEST_MODES2, | |
| &val, NULL); | |
| printk(KERN_DEBUG "%s: Turning radio off: %s\n", | |
| dev->name, ret ? "failed" : "OK"); | |
| local->txpower_type = PRISM2_TXPOWER_OFF; | |
| } | |
| return (ret ? -EOPNOTSUPP : 0); | |
| } | |
| if (local->txpower_type == PRISM2_TXPOWER_OFF) { | |
| val = 0; /* disable all standby and sleep modes */ | |
| ret = local->func->cmd(dev, HFA384X_CMDCODE_WRITEMIF, | |
| HFA386X_CR_A_D_TEST_MODES2, &val, NULL); | |
| printk(KERN_DEBUG "%s: Turning radio on: %s\n", | |
| dev->name, ret ? "failed" : "OK"); | |
| local->txpower_type = PRISM2_TXPOWER_UNKNOWN; | |
| } | |
| #ifdef RAW_TXPOWER_SETTING | |
| if (!rrq->fixed && local->txpower_type != PRISM2_TXPOWER_AUTO) { | |
| printk(KERN_DEBUG "Setting ALC on\n"); | |
| val = HFA384X_TEST_CFG_BIT_ALC; | |
| local->func->cmd(dev, HFA384X_CMDCODE_TEST | | |
| (HFA384X_TEST_CFG_BITS << 8), 1, &val, NULL); | |
| local->txpower_type = PRISM2_TXPOWER_AUTO; | |
| return 0; | |
| } | |
| if (local->txpower_type != PRISM2_TXPOWER_FIXED) { | |
| printk(KERN_DEBUG "Setting ALC off\n"); | |
| val = HFA384X_TEST_CFG_BIT_ALC; | |
| local->func->cmd(dev, HFA384X_CMDCODE_TEST | | |
| (HFA384X_TEST_CFG_BITS << 8), 0, &val, NULL); | |
| local->txpower_type = PRISM2_TXPOWER_FIXED; | |
| } | |
| if (rrq->flags == IW_TXPOW_DBM) | |
| tmp = "dBm"; | |
| else if (rrq->flags == IW_TXPOW_MWATT) | |
| tmp = "mW"; | |
| else | |
| tmp = "UNKNOWN"; | |
| printk(KERN_DEBUG "Setting TX power to %d %s\n", rrq->value, tmp); | |
| if (rrq->flags != IW_TXPOW_DBM) { | |
| printk("SIOCSIWTXPOW with mW is not supported; use dBm\n"); | |
| return -EOPNOTSUPP; | |
| } | |
| local->txpower = rrq->value; | |
| val = prism2_txpower_dBm_to_hfa386x(local->txpower); | |
| if (local->func->cmd(dev, HFA384X_CMDCODE_WRITEMIF, | |
| HFA386X_CR_MANUAL_TX_POWER, &val, NULL)) | |
| ret = -EOPNOTSUPP; | |
| #else /* RAW_TXPOWER_SETTING */ | |
| if (rrq->fixed) | |
| ret = -EOPNOTSUPP; | |
| #endif /* RAW_TXPOWER_SETTING */ | |
| return ret; | |
| } | |
| static int prism2_ioctl_giwtxpow(struct net_device *dev, | |
| struct iw_request_info *info, | |
| struct iw_param *rrq, char *extra) | |
| { | |
| #ifdef RAW_TXPOWER_SETTING | |
| struct hostap_interface *iface; | |
| local_info_t *local; | |
| u16 resp0; | |
| iface = netdev_priv(dev); | |
| local = iface->local; | |
| rrq->flags = IW_TXPOW_DBM; | |
| rrq->disabled = 0; | |
| rrq->fixed = 0; | |
| if (local->txpower_type == PRISM2_TXPOWER_AUTO) { | |
| if (local->func->cmd(dev, HFA384X_CMDCODE_READMIF, | |
| HFA386X_CR_MANUAL_TX_POWER, | |
| NULL, &resp0) == 0) { | |
| rrq->value = prism2_txpower_hfa386x_to_dBm(resp0); | |
| } else { | |
| /* Could not get real txpower; guess 15 dBm */ | |
| rrq->value = 15; | |
| } | |
| } else if (local->txpower_type == PRISM2_TXPOWER_OFF) { | |
| rrq->value = 0; | |
| rrq->disabled = 1; | |
| } else if (local->txpower_type == PRISM2_TXPOWER_FIXED) { | |
| rrq->value = local->txpower; | |
| rrq->fixed = 1; | |
| } else { | |
| printk("SIOCGIWTXPOW - unknown txpower_type=%d\n", | |
| local->txpower_type); | |
| } | |
| return 0; | |
| #else /* RAW_TXPOWER_SETTING */ | |
| return -EOPNOTSUPP; | |
| #endif /* RAW_TXPOWER_SETTING */ | |
| } | |
| #ifndef PRISM2_NO_STATION_MODES | |
| /* HostScan request works with and without host_roaming mode. In addition, it | |
| * does not break current association. However, it requires newer station | |
| * firmware version (>= 1.3.1) than scan request. */ | |
| static int prism2_request_hostscan(struct net_device *dev, | |
| u8 *ssid, u8 ssid_len) | |
| { | |
| struct hostap_interface *iface; | |
| local_info_t *local; | |
| struct hfa384x_hostscan_request scan_req; | |
| iface = netdev_priv(dev); | |
| local = iface->local; | |
| memset(&scan_req, 0, sizeof(scan_req)); | |
| scan_req.channel_list = cpu_to_le16(local->channel_mask & | |
| local->scan_channel_mask); | |
| scan_req.txrate = cpu_to_le16(HFA384X_RATES_1MBPS); | |
| if (ssid) { | |
| if (ssid_len > 32) | |
| return -EINVAL; | |
| scan_req.target_ssid_len = cpu_to_le16(ssid_len); | |
| memcpy(scan_req.target_ssid, ssid, ssid_len); | |
| } | |
| if (local->func->set_rid(dev, HFA384X_RID_HOSTSCAN, &scan_req, | |
| sizeof(scan_req))) { | |
| printk(KERN_DEBUG "%s: HOSTSCAN failed\n", dev->name); | |
| return -EINVAL; | |
| } | |
| return 0; | |
| } | |
| static int prism2_request_scan(struct net_device *dev) | |
| { | |
| struct hostap_interface *iface; | |
| local_info_t *local; | |
| struct hfa384x_scan_request scan_req; | |
| int ret = 0; | |
| iface = netdev_priv(dev); | |
| local = iface->local; | |
| memset(&scan_req, 0, sizeof(scan_req)); | |
| scan_req.channel_list = cpu_to_le16(local->channel_mask & | |
| local->scan_channel_mask); | |
| scan_req.txrate = cpu_to_le16(HFA384X_RATES_1MBPS); | |
| /* FIX: | |
| * It seems to be enough to set roaming mode for a short moment to | |
| * host-based and then setup scanrequest data and return the mode to | |
| * firmware-based. | |
| * | |
| * Master mode would need to drop to Managed mode for a short while | |
| * to make scanning work.. Or sweep through the different channels and | |
| * use passive scan based on beacons. */ | |
| if (!local->host_roaming) | |
| hostap_set_word(dev, HFA384X_RID_CNFROAMINGMODE, | |
| HFA384X_ROAMING_HOST); | |
| if (local->func->set_rid(dev, HFA384X_RID_SCANREQUEST, &scan_req, | |
| sizeof(scan_req))) { | |
| printk(KERN_DEBUG "SCANREQUEST failed\n"); | |
| ret = -EINVAL; | |
| } | |
| if (!local->host_roaming) | |
| hostap_set_word(dev, HFA384X_RID_CNFROAMINGMODE, | |
| HFA384X_ROAMING_FIRMWARE); | |
| return ret; | |
| } | |
| #else /* !PRISM2_NO_STATION_MODES */ | |
| static inline int prism2_request_hostscan(struct net_device *dev, | |
| u8 *ssid, u8 ssid_len) | |
| { | |
| return -EOPNOTSUPP; | |
| } | |
| static inline int prism2_request_scan(struct net_device *dev) | |
| { | |
| return -EOPNOTSUPP; | |
| } | |
| #endif /* !PRISM2_NO_STATION_MODES */ | |
| static int prism2_ioctl_siwscan(struct net_device *dev, | |
| struct iw_request_info *info, | |
| struct iw_point *data, char *extra) | |
| { | |
| struct hostap_interface *iface; | |
| local_info_t *local; | |
| int ret; | |
| u8 *ssid = NULL, ssid_len = 0; | |
| struct iw_scan_req *req = (struct iw_scan_req *) extra; | |
| iface = netdev_priv(dev); | |
| local = iface->local; | |
| if (data->length < sizeof(struct iw_scan_req)) | |
| req = NULL; | |
| if (local->iw_mode == IW_MODE_MASTER) { | |
| /* In master mode, we just return the results of our local | |
| * tables, so we don't need to start anything... | |
| * Jean II */ | |
| data->length = 0; | |
| return 0; | |
| } | |
| if (!local->dev_enabled) | |
| return -ENETDOWN; | |
| if (req && data->flags & IW_SCAN_THIS_ESSID) { | |
| ssid = req->essid; | |
| ssid_len = req->essid_len; | |
| if (ssid_len && | |
| ((local->iw_mode != IW_MODE_INFRA && | |
| local->iw_mode != IW_MODE_ADHOC) || | |
| (local->sta_fw_ver < PRISM2_FW_VER(1,3,1)))) | |
| return -EOPNOTSUPP; | |
| } | |
| if (local->sta_fw_ver >= PRISM2_FW_VER(1,3,1)) | |
| ret = prism2_request_hostscan(dev, ssid, ssid_len); | |
| else | |
| ret = prism2_request_scan(dev); | |
| if (ret == 0) | |
| local->scan_timestamp = jiffies; | |
| /* Could inquire F101, F103 or wait for SIOCGIWSCAN and read RID */ | |
| return ret; | |
| } | |
| #ifndef PRISM2_NO_STATION_MODES | |
| static char * __prism2_translate_scan(local_info_t *local, | |
| struct iw_request_info *info, | |
| struct hfa384x_hostscan_result *scan, | |
| struct hostap_bss_info *bss, | |
| char *current_ev, char *end_buf) | |
| { | |
| int i, chan; | |
| struct iw_event iwe; | |
| char *current_val; | |
| u16 capabilities; | |
| u8 *pos; | |
| u8 *ssid, *bssid; | |
| size_t ssid_len; | |
| char *buf; | |
| if (bss) { | |
| ssid = bss->ssid; | |
| ssid_len = bss->ssid_len; | |
| bssid = bss->bssid; | |
| } else { | |
| ssid = scan->ssid; | |
| ssid_len = le16_to_cpu(scan->ssid_len); | |
| bssid = scan->bssid; | |
| } | |
| if (ssid_len > 32) | |
| ssid_len = 32; | |
| /* First entry *MUST* be the AP MAC address */ | |
| memset(&iwe, 0, sizeof(iwe)); | |
| iwe.cmd = SIOCGIWAP; | |
| iwe.u.ap_addr.sa_family = ARPHRD_ETHER; | |
| memcpy(iwe.u.ap_addr.sa_data, bssid, ETH_ALEN); | |
| current_ev = iwe_stream_add_event(info, current_ev, end_buf, &iwe, | |
| IW_EV_ADDR_LEN); | |
| /* Other entries will be displayed in the order we give them */ | |
| memset(&iwe, 0, sizeof(iwe)); | |
| iwe.cmd = SIOCGIWESSID; | |
| iwe.u.data.length = ssid_len; | |
| iwe.u.data.flags = 1; | |
| current_ev = iwe_stream_add_point(info, current_ev, end_buf, | |
| &iwe, ssid); | |
| memset(&iwe, 0, sizeof(iwe)); | |
| iwe.cmd = SIOCGIWMODE; | |
| if (bss) { | |
| capabilities = bss->capab_info; | |
| } else { | |
| capabilities = le16_to_cpu(scan->capability); | |
| } | |
| if (capabilities & (WLAN_CAPABILITY_ESS | | |
| WLAN_CAPABILITY_IBSS)) { | |
| if (capabilities & WLAN_CAPABILITY_ESS) | |
| iwe.u.mode = IW_MODE_MASTER; | |
| else | |
| iwe.u.mode = IW_MODE_ADHOC; | |
| current_ev = iwe_stream_add_event(info, current_ev, end_buf, | |
| &iwe, IW_EV_UINT_LEN); | |
| } | |
| memset(&iwe, 0, sizeof(iwe)); | |
| iwe.cmd = SIOCGIWFREQ; | |
| if (scan) { | |
| chan = le16_to_cpu(scan->chid); | |
| } else if (bss) { | |
| chan = bss->chan; | |
| } else { | |
| chan = 0; | |
| } | |
| if (chan > 0) { | |
| iwe.u.freq.m = freq_list[chan - 1] * 100000; | |
| iwe.u.freq.e = 1; | |
| current_ev = iwe_stream_add_event(info, current_ev, end_buf, | |
| &iwe, IW_EV_FREQ_LEN); | |
| } | |
| if (scan) { | |
| memset(&iwe, 0, sizeof(iwe)); | |
| iwe.cmd = IWEVQUAL; | |
| if (local->last_scan_type == PRISM2_HOSTSCAN) { | |
| iwe.u.qual.level = le16_to_cpu(scan->sl); | |
| iwe.u.qual.noise = le16_to_cpu(scan->anl); | |
| } else { | |
| iwe.u.qual.level = | |
| HFA384X_LEVEL_TO_dBm(le16_to_cpu(scan->sl)); | |
| iwe.u.qual.noise = | |
| HFA384X_LEVEL_TO_dBm(le16_to_cpu(scan->anl)); | |
| } | |
| iwe.u.qual.updated = IW_QUAL_LEVEL_UPDATED | |
| | IW_QUAL_NOISE_UPDATED | |
| | IW_QUAL_QUAL_INVALID | |
| | IW_QUAL_DBM; | |
| current_ev = iwe_stream_add_event(info, current_ev, end_buf, | |
| &iwe, IW_EV_QUAL_LEN); | |
| } | |
| memset(&iwe, 0, sizeof(iwe)); | |
| iwe.cmd = SIOCGIWENCODE; | |
| if (capabilities & WLAN_CAPABILITY_PRIVACY) | |
| iwe.u.data.flags = IW_ENCODE_ENABLED | IW_ENCODE_NOKEY; | |
| else | |
| iwe.u.data.flags = IW_ENCODE_DISABLED; | |
| iwe.u.data.length = 0; | |
| current_ev = iwe_stream_add_point(info, current_ev, end_buf, &iwe, ""); | |
| /* TODO: add SuppRates into BSS table */ | |
| if (scan) { | |
| memset(&iwe, 0, sizeof(iwe)); | |
| iwe.cmd = SIOCGIWRATE; | |
| current_val = current_ev + iwe_stream_lcp_len(info); | |
| pos = scan->sup_rates; | |
| for (i = 0; i < sizeof(scan->sup_rates); i++) { | |
| if (pos[i] == 0) | |
| break; | |
| /* Bit rate given in 500 kb/s units (+ 0x80) */ | |
| iwe.u.bitrate.value = ((pos[i] & 0x7f) * 500000); | |
| current_val = iwe_stream_add_value( | |
| info, current_ev, current_val, end_buf, &iwe, | |
| IW_EV_PARAM_LEN); | |
| } | |
| /* Check if we added any event */ | |
| if ((current_val - current_ev) > iwe_stream_lcp_len(info)) | |
| current_ev = current_val; | |
| } | |
| /* TODO: add BeaconInt,resp_rate,atim into BSS table */ | |
| buf = kmalloc(MAX_WPA_IE_LEN * 2 + 30, GFP_ATOMIC); | |
| if (buf && scan) { | |
| memset(&iwe, 0, sizeof(iwe)); | |
| iwe.cmd = IWEVCUSTOM; | |
| sprintf(buf, "bcn_int=%d", le16_to_cpu(scan->beacon_interval)); | |
| iwe.u.data.length = strlen(buf); | |
| current_ev = iwe_stream_add_point(info, current_ev, end_buf, | |
| &iwe, buf); | |
| memset(&iwe, 0, sizeof(iwe)); | |
| iwe.cmd = IWEVCUSTOM; | |
| sprintf(buf, "resp_rate=%d", le16_to_cpu(scan->rate)); | |
| iwe.u.data.length = strlen(buf); | |
| current_ev = iwe_stream_add_point(info, current_ev, end_buf, | |
| &iwe, buf); | |
| if (local->last_scan_type == PRISM2_HOSTSCAN && | |
| (capabilities & WLAN_CAPABILITY_IBSS)) { | |
| memset(&iwe, 0, sizeof(iwe)); | |
| iwe.cmd = IWEVCUSTOM; | |
| sprintf(buf, "atim=%d", le16_to_cpu(scan->atim)); | |
| iwe.u.data.length = strlen(buf); | |
| current_ev = iwe_stream_add_point(info, current_ev, | |
| end_buf, &iwe, buf); | |
| } | |
| } | |
| kfree(buf); | |
| if (bss && bss->wpa_ie_len > 0 && bss->wpa_ie_len <= MAX_WPA_IE_LEN) { | |
| memset(&iwe, 0, sizeof(iwe)); | |
| iwe.cmd = IWEVGENIE; | |
| iwe.u.data.length = bss->wpa_ie_len; | |
| current_ev = iwe_stream_add_point(info, current_ev, end_buf, | |
| &iwe, bss->wpa_ie); | |
| } | |
| if (bss && bss->rsn_ie_len > 0 && bss->rsn_ie_len <= MAX_WPA_IE_LEN) { | |
| memset(&iwe, 0, sizeof(iwe)); | |
| iwe.cmd = IWEVGENIE; | |
| iwe.u.data.length = bss->rsn_ie_len; | |
| current_ev = iwe_stream_add_point(info, current_ev, end_buf, | |
| &iwe, bss->rsn_ie); | |
| } | |
| return current_ev; | |
| } | |
| /* Translate scan data returned from the card to a card independent | |
| * format that the Wireless Tools will understand - Jean II */ | |
| static inline int prism2_translate_scan(local_info_t *local, | |
| struct iw_request_info *info, | |
| char *buffer, int buflen) | |
| { | |
| struct hfa384x_hostscan_result *scan; | |
| int entry, hostscan; | |
| char *current_ev = buffer; | |
| char *end_buf = buffer + buflen; | |
| struct list_head *ptr; | |
| spin_lock_bh(&local->lock); | |
| list_for_each(ptr, &local->bss_list) { | |
| struct hostap_bss_info *bss; | |
| bss = list_entry(ptr, struct hostap_bss_info, list); | |
| bss->included = 0; | |
| } | |
| hostscan = local->last_scan_type == PRISM2_HOSTSCAN; | |
| for (entry = 0; entry < local->last_scan_results_count; entry++) { | |
| int found = 0; | |
| scan = &local->last_scan_results[entry]; | |
| /* Report every SSID if the AP is using multiple SSIDs. If no | |
| * BSS record is found (e.g., when WPA mode is disabled), | |
| * report the AP once. */ | |
| list_for_each(ptr, &local->bss_list) { | |
| struct hostap_bss_info *bss; | |
| bss = list_entry(ptr, struct hostap_bss_info, list); | |
| if (ether_addr_equal(bss->bssid, scan->bssid)) { | |
| bss->included = 1; | |
| current_ev = __prism2_translate_scan( | |
| local, info, scan, bss, current_ev, | |
| end_buf); | |
| found++; | |
| } | |
| } | |
| if (!found) { | |
| current_ev = __prism2_translate_scan( | |
| local, info, scan, NULL, current_ev, end_buf); | |
| } | |
| /* Check if there is space for one more entry */ | |
| if ((end_buf - current_ev) <= IW_EV_ADDR_LEN) { | |
| /* Ask user space to try again with a bigger buffer */ | |
| spin_unlock_bh(&local->lock); | |
| return -E2BIG; | |
| } | |
| } | |
| /* Prism2 firmware has limits (32 at least in some versions) for number | |
| * of BSSes in scan results. Extend this limit by using local BSS list. | |
| */ | |
| list_for_each(ptr, &local->bss_list) { | |
| struct hostap_bss_info *bss; | |
| bss = list_entry(ptr, struct hostap_bss_info, list); | |
| if (bss->included) | |
| continue; | |
| current_ev = __prism2_translate_scan(local, info, NULL, bss, | |
| current_ev, end_buf); | |
| /* Check if there is space for one more entry */ | |
| if ((end_buf - current_ev) <= IW_EV_ADDR_LEN) { | |
| /* Ask user space to try again with a bigger buffer */ | |
| spin_unlock_bh(&local->lock); | |
| return -E2BIG; | |
| } | |
| } | |
| spin_unlock_bh(&local->lock); | |
| return current_ev - buffer; | |
| } | |
| #endif /* PRISM2_NO_STATION_MODES */ | |
| static inline int prism2_ioctl_giwscan_sta(struct net_device *dev, | |
| struct iw_request_info *info, | |
| struct iw_point *data, char *extra) | |
| { | |
| #ifdef PRISM2_NO_STATION_MODES | |
| return -EOPNOTSUPP; | |
| #else /* PRISM2_NO_STATION_MODES */ | |
| struct hostap_interface *iface; | |
| local_info_t *local; | |
| int res; | |
| iface = netdev_priv(dev); | |
| local = iface->local; | |
| /* Wait until the scan is finished. We can probably do better | |
| * than that - Jean II */ | |
| if (local->scan_timestamp && | |
| time_before(jiffies, local->scan_timestamp + 3 * HZ)) { | |
| /* Important note : we don't want to block the caller | |
| * until results are ready for various reasons. | |
| * First, managing wait queues is complex and racy | |
| * (there may be multiple simultaneous callers). | |
| * Second, we grab some rtnetlink lock before coming | |
| * here (in dev_ioctl()). | |
| * Third, the caller can wait on the Wireless Event | |
| * - Jean II */ | |
| return -EAGAIN; | |
| } | |
| local->scan_timestamp = 0; | |
| res = prism2_translate_scan(local, info, extra, data->length); | |
| if (res >= 0) { | |
| data->length = res; | |
| return 0; | |
| } else { | |
| data->length = 0; | |
| return res; | |
| } | |
| #endif /* PRISM2_NO_STATION_MODES */ | |
| } | |
| static int prism2_ioctl_giwscan(struct net_device *dev, | |
| struct iw_request_info *info, | |
| struct iw_point *data, char *extra) | |
| { | |
| struct hostap_interface *iface; | |
| local_info_t *local; | |
| int res; | |
| iface = netdev_priv(dev); | |
| local = iface->local; | |
| if (local->iw_mode == IW_MODE_MASTER) { | |
| /* In MASTER mode, it doesn't make sense to go around | |
| * scanning the frequencies and make the stations we serve | |
| * wait when what the user is really interested about is the | |
| * list of stations and access points we are talking to. | |
| * So, just extract results from our cache... | |
| * Jean II */ | |
| /* Translate to WE format */ | |
| res = prism2_ap_translate_scan(dev, info, extra); | |
| if (res >= 0) { | |
| printk(KERN_DEBUG "Scan result translation succeeded " | |
| "(length=%d)\n", res); | |
| data->length = res; | |
| return 0; | |
| } else { | |
| printk(KERN_DEBUG | |
| "Scan result translation failed (res=%d)\n", | |
| res); | |
| data->length = 0; | |
| return res; | |
| } | |
| } else { | |
| /* Station mode */ | |
| return prism2_ioctl_giwscan_sta(dev, info, data, extra); | |
| } | |
| } | |
| static const struct iw_priv_args prism2_priv[] = { | |
| { PRISM2_IOCTL_MONITOR, | |
| IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "monitor" }, | |
| { PRISM2_IOCTL_READMIF, | |
| IW_PRIV_TYPE_BYTE | IW_PRIV_SIZE_FIXED | 1, | |
| IW_PRIV_TYPE_BYTE | IW_PRIV_SIZE_FIXED | 1, "readmif" }, | |
| { PRISM2_IOCTL_WRITEMIF, | |
| IW_PRIV_TYPE_BYTE | IW_PRIV_SIZE_FIXED | 2, 0, "writemif" }, | |
| { PRISM2_IOCTL_RESET, | |
| IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "reset" }, | |
| { PRISM2_IOCTL_INQUIRE, | |
| IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "inquire" }, | |
| { PRISM2_IOCTL_SET_RID_WORD, | |
| IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 2, 0, "set_rid_word" }, | |
| { PRISM2_IOCTL_MACCMD, | |
| IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "maccmd" }, | |
| { PRISM2_IOCTL_WDS_ADD, | |
| IW_PRIV_TYPE_ADDR | IW_PRIV_SIZE_FIXED | 1, 0, "wds_add" }, | |
| { PRISM2_IOCTL_WDS_DEL, | |
| IW_PRIV_TYPE_ADDR | IW_PRIV_SIZE_FIXED | 1, 0, "wds_del" }, | |
| { PRISM2_IOCTL_ADDMAC, | |
| IW_PRIV_TYPE_ADDR | IW_PRIV_SIZE_FIXED | 1, 0, "addmac" }, | |
| { PRISM2_IOCTL_DELMAC, | |
| IW_PRIV_TYPE_ADDR | IW_PRIV_SIZE_FIXED | 1, 0, "delmac" }, | |
| { PRISM2_IOCTL_KICKMAC, | |
| IW_PRIV_TYPE_ADDR | IW_PRIV_SIZE_FIXED | 1, 0, "kickmac" }, | |
| /* --- raw access to sub-ioctls --- */ | |
| { PRISM2_IOCTL_PRISM2_PARAM, | |
| IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 2, 0, "prism2_param" }, | |
| { PRISM2_IOCTL_GET_PRISM2_PARAM, | |
| IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, | |
| IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "getprism2_param" }, | |
| /* --- sub-ioctls handlers --- */ | |
| { PRISM2_IOCTL_PRISM2_PARAM, | |
| IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "" }, | |
| { PRISM2_IOCTL_GET_PRISM2_PARAM, | |
| 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "" }, | |
| /* --- sub-ioctls definitions --- */ | |
| { PRISM2_PARAM_TXRATECTRL, | |
| IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "txratectrl" }, | |
| { PRISM2_PARAM_TXRATECTRL, | |
| 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "gettxratectrl" }, | |
| { PRISM2_PARAM_BEACON_INT, | |
| IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "beacon_int" }, | |
| { PRISM2_PARAM_BEACON_INT, | |
| 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "getbeacon_int" }, | |
| #ifndef PRISM2_NO_STATION_MODES | |
| { PRISM2_PARAM_PSEUDO_IBSS, | |
| IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "pseudo_ibss" }, | |
| { PRISM2_PARAM_PSEUDO_IBSS, | |
| 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "getpseudo_ibss" }, | |
| #endif /* PRISM2_NO_STATION_MODES */ | |
| { PRISM2_PARAM_ALC, | |
| IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "alc" }, | |
| { PRISM2_PARAM_ALC, | |
| 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "getalc" }, | |
| { PRISM2_PARAM_DUMP, | |
| IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "dump" }, | |
| { PRISM2_PARAM_DUMP, | |
| 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "getdump" }, | |
| { PRISM2_PARAM_OTHER_AP_POLICY, | |
| IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "other_ap_policy" }, | |
| { PRISM2_PARAM_OTHER_AP_POLICY, | |
| 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "getother_ap_pol" }, | |
| { PRISM2_PARAM_AP_MAX_INACTIVITY, | |
| IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "max_inactivity" }, | |
| { PRISM2_PARAM_AP_MAX_INACTIVITY, | |
| 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "getmax_inactivi" }, | |
| { PRISM2_PARAM_AP_BRIDGE_PACKETS, | |
| IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "bridge_packets" }, | |
| { PRISM2_PARAM_AP_BRIDGE_PACKETS, | |
| 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "getbridge_packe" }, | |
| { PRISM2_PARAM_DTIM_PERIOD, | |
| IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "dtim_period" }, | |
| { PRISM2_PARAM_DTIM_PERIOD, | |
| 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "getdtim_period" }, | |
| { PRISM2_PARAM_AP_NULLFUNC_ACK, | |
| IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "nullfunc_ack" }, | |
| { PRISM2_PARAM_AP_NULLFUNC_ACK, | |
| 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "getnullfunc_ack" }, | |
| { PRISM2_PARAM_MAX_WDS, | |
| IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "max_wds" }, | |
| { PRISM2_PARAM_MAX_WDS, | |
| 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "getmax_wds" }, | |
| { PRISM2_PARAM_AP_AUTOM_AP_WDS, | |
| IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "autom_ap_wds" }, | |
| { PRISM2_PARAM_AP_AUTOM_AP_WDS, | |
| 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "getautom_ap_wds" }, | |
| { PRISM2_PARAM_AP_AUTH_ALGS, | |
| IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "ap_auth_algs" }, | |
| { PRISM2_PARAM_AP_AUTH_ALGS, | |
| 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "getap_auth_algs" }, | |
| { PRISM2_PARAM_MONITOR_ALLOW_FCSERR, | |
| IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "allow_fcserr" }, | |
| { PRISM2_PARAM_MONITOR_ALLOW_FCSERR, | |
| 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "getallow_fcserr" }, | |
| { PRISM2_PARAM_HOST_ENCRYPT, | |
| IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "host_encrypt" }, | |
| { PRISM2_PARAM_HOST_ENCRYPT, | |
| 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "gethost_encrypt" }, | |
| { PRISM2_PARAM_HOST_DECRYPT, | |
| IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "host_decrypt" }, | |
| { PRISM2_PARAM_HOST_DECRYPT, | |
| 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "gethost_decrypt" }, | |
| #ifndef PRISM2_NO_STATION_MODES | |
| { PRISM2_PARAM_HOST_ROAMING, | |
| IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "host_roaming" }, | |
| { PRISM2_PARAM_HOST_ROAMING, | |
| 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "gethost_roaming" }, | |
| #endif /* PRISM2_NO_STATION_MODES */ | |
| { PRISM2_PARAM_BCRX_STA_KEY, | |
| IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "bcrx_sta_key" }, | |
| { PRISM2_PARAM_BCRX_STA_KEY, | |
| 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "getbcrx_sta_key" }, | |
| { PRISM2_PARAM_IEEE_802_1X, | |
| IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "ieee_802_1x" }, | |
| { PRISM2_PARAM_IEEE_802_1X, | |
| 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "getieee_802_1x" }, | |
| { PRISM2_PARAM_ANTSEL_TX, | |
| IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "antsel_tx" }, | |
| { PRISM2_PARAM_ANTSEL_TX, | |
| 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "getantsel_tx" }, | |
| { PRISM2_PARAM_ANTSEL_RX, | |
| IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "antsel_rx" }, | |
| { PRISM2_PARAM_ANTSEL_RX, | |
| 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "getantsel_rx" }, | |
| { PRISM2_PARAM_MONITOR_TYPE, | |
| IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "monitor_type" }, | |
| { PRISM2_PARAM_MONITOR_TYPE, | |
| 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "getmonitor_type" }, | |
| { PRISM2_PARAM_WDS_TYPE, | |
| IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "wds_type" }, | |
| { PRISM2_PARAM_WDS_TYPE, | |
| 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "getwds_type" }, | |
| { PRISM2_PARAM_HOSTSCAN, | |
| IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "hostscan" }, | |
| { PRISM2_PARAM_HOSTSCAN, | |
| 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "gethostscan" }, | |
| { PRISM2_PARAM_AP_SCAN, | |
| IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "ap_scan" }, | |
| { PRISM2_PARAM_AP_SCAN, | |
| 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "getap_scan" }, | |
| { PRISM2_PARAM_ENH_SEC, | |
| IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "enh_sec" }, | |
| { PRISM2_PARAM_ENH_SEC, | |
| 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "getenh_sec" }, | |
| #ifdef PRISM2_IO_DEBUG | |
| { PRISM2_PARAM_IO_DEBUG, | |
| IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "io_debug" }, | |
| { PRISM2_PARAM_IO_DEBUG, | |
| 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "getio_debug" }, | |
| #endif /* PRISM2_IO_DEBUG */ | |
| { PRISM2_PARAM_BASIC_RATES, | |
| IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "basic_rates" }, | |
| { PRISM2_PARAM_BASIC_RATES, | |
| 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "getbasic_rates" }, | |
| { PRISM2_PARAM_OPER_RATES, | |
| IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "oper_rates" }, | |
| { PRISM2_PARAM_OPER_RATES, | |
| 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "getoper_rates" }, | |
| { PRISM2_PARAM_HOSTAPD, | |
| IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "hostapd" }, | |
| { PRISM2_PARAM_HOSTAPD, | |
| 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "gethostapd" }, | |
| { PRISM2_PARAM_HOSTAPD_STA, | |
| IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "hostapd_sta" }, | |
| { PRISM2_PARAM_HOSTAPD_STA, | |
| 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "gethostapd_sta" }, | |
| { PRISM2_PARAM_WPA, | |
| IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "wpa" }, | |
| { PRISM2_PARAM_WPA, | |
| 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "getwpa" }, | |
| { PRISM2_PARAM_PRIVACY_INVOKED, | |
| IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "privacy_invoked" }, | |
| { PRISM2_PARAM_PRIVACY_INVOKED, | |
| 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "getprivacy_invo" }, | |
| { PRISM2_PARAM_TKIP_COUNTERMEASURES, | |
| IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "tkip_countermea" }, | |
| { PRISM2_PARAM_TKIP_COUNTERMEASURES, | |
| 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "gettkip_counter" }, | |
| { PRISM2_PARAM_DROP_UNENCRYPTED, | |
| IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "drop_unencrypte" }, | |
| { PRISM2_PARAM_DROP_UNENCRYPTED, | |
| 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "getdrop_unencry" }, | |
| { PRISM2_PARAM_SCAN_CHANNEL_MASK, | |
| IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "scan_channels" }, | |
| { PRISM2_PARAM_SCAN_CHANNEL_MASK, | |
| 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "getscan_channel" }, | |
| }; | |
| static int prism2_ioctl_priv_inquire(struct net_device *dev, int *i) | |
| { | |
| struct hostap_interface *iface; | |
| local_info_t *local; | |
| iface = netdev_priv(dev); | |
| local = iface->local; | |
| if (local->func->cmd(dev, HFA384X_CMDCODE_INQUIRE, *i, NULL, NULL)) | |
| return -EOPNOTSUPP; | |
| return 0; | |
| } | |
| static int prism2_ioctl_priv_prism2_param(struct net_device *dev, | |
| struct iw_request_info *info, | |
| void *wrqu, char *extra) | |
| { | |
| struct hostap_interface *iface; | |
| local_info_t *local; | |
| int *i = (int *) extra; | |
| int param = *i; | |
| int value = *(i + 1); | |
| int ret = 0; | |
| u16 val; | |
| iface = netdev_priv(dev); | |
| local = iface->local; | |
| switch (param) { | |
| case PRISM2_PARAM_TXRATECTRL: | |
| local->fw_tx_rate_control = value; | |
| break; | |
| case PRISM2_PARAM_BEACON_INT: | |
| if (hostap_set_word(dev, HFA384X_RID_CNFBEACONINT, value) || | |
| local->func->reset_port(dev)) | |
| ret = -EINVAL; | |
| else | |
| local->beacon_int = value; | |
| break; | |
| #ifndef PRISM2_NO_STATION_MODES | |
| case PRISM2_PARAM_PSEUDO_IBSS: | |
| if (value == local->pseudo_adhoc) | |
| break; | |
| if (value != 0 && value != 1) { | |
| ret = -EINVAL; | |
| break; | |
| } | |
| printk(KERN_DEBUG "prism2: %s: pseudo IBSS change %d -> %d\n", | |
| dev->name, local->pseudo_adhoc, value); | |
| local->pseudo_adhoc = value; | |
| if (local->iw_mode != IW_MODE_ADHOC) | |
| break; | |
| if (hostap_set_word(dev, HFA384X_RID_CNFPORTTYPE, | |
| hostap_get_porttype(local))) { | |
| ret = -EOPNOTSUPP; | |
| break; | |
| } | |
| if (local->func->reset_port(dev)) | |
| ret = -EINVAL; | |
| break; | |
| #endif /* PRISM2_NO_STATION_MODES */ | |
| case PRISM2_PARAM_ALC: | |
| printk(KERN_DEBUG "%s: %s ALC\n", dev->name, | |
| value == 0 ? "Disabling" : "Enabling"); | |
| val = HFA384X_TEST_CFG_BIT_ALC; | |
| local->func->cmd(dev, HFA384X_CMDCODE_TEST | | |
| (HFA384X_TEST_CFG_BITS << 8), | |
| value == 0 ? 0 : 1, &val, NULL); | |
| break; | |
| case PRISM2_PARAM_DUMP: | |
| local->frame_dump = value; | |
| break; | |
| case PRISM2_PARAM_OTHER_AP_POLICY: | |
| if (value < 0 || value > 3) { | |
| ret = -EINVAL; | |
| break; | |
| } | |
| if (local->ap != NULL) | |
| local->ap->ap_policy = value; | |
| break; | |
| case PRISM2_PARAM_AP_MAX_INACTIVITY: | |
| if (value < 0 || value > 7 * 24 * 60 * 60) { | |
| ret = -EINVAL; | |
| break; | |
| } | |
| if (local->ap != NULL) | |
| local->ap->max_inactivity = value * HZ; | |
| break; | |
| case PRISM2_PARAM_AP_BRIDGE_PACKETS: | |
| if (local->ap != NULL) | |
| local->ap->bridge_packets = value; | |
| break; | |
| case PRISM2_PARAM_DTIM_PERIOD: | |
| if (value < 0 || value > 65535) { | |
| ret = -EINVAL; | |
| break; | |
| } | |
| if (hostap_set_word(dev, HFA384X_RID_CNFOWNDTIMPERIOD, value) | |
| || local->func->reset_port(dev)) | |
| ret = -EINVAL; | |
| else | |
| local->dtim_period = value; | |
| break; | |
| case PRISM2_PARAM_AP_NULLFUNC_ACK: | |
| if (local->ap != NULL) | |
| local->ap->nullfunc_ack = value; | |
| break; | |
| case PRISM2_PARAM_MAX_WDS: | |
| local->wds_max_connections = value; | |
| break; | |
| case PRISM2_PARAM_AP_AUTOM_AP_WDS: | |
| if (local->ap != NULL) { | |
| if (!local->ap->autom_ap_wds && value) { | |
| /* add WDS link to all APs in STA table */ | |
| hostap_add_wds_links(local); | |
| } | |
| local->ap->autom_ap_wds = value; | |
| } | |
| break; | |
| case PRISM2_PARAM_AP_AUTH_ALGS: | |
| local->auth_algs = value; | |
| if (hostap_set_auth_algs(local)) | |
| ret = -EINVAL; | |
| break; | |
| case PRISM2_PARAM_MONITOR_ALLOW_FCSERR: | |
| local->monitor_allow_fcserr = value; | |
| break; | |
| case PRISM2_PARAM_HOST_ENCRYPT: | |
| local->host_encrypt = value; | |
| if (hostap_set_encryption(local) || | |
| local->func->reset_port(dev)) | |
| ret = -EINVAL; | |
| break; | |
| case PRISM2_PARAM_HOST_DECRYPT: | |
| local->host_decrypt = value; | |
| if (hostap_set_encryption(local) || | |
| local->func->reset_port(dev)) | |
| ret = -EINVAL; | |
| break; | |
| #ifndef PRISM2_NO_STATION_MODES | |
| case PRISM2_PARAM_HOST_ROAMING: | |
| if (value < 0 || value > 2) { | |
| ret = -EINVAL; | |
| break; | |
| } | |
| local->host_roaming = value; | |
| if (hostap_set_roaming(local) || local->func->reset_port(dev)) | |
| ret = -EINVAL; | |
| break; | |
| #endif /* PRISM2_NO_STATION_MODES */ | |
| case PRISM2_PARAM_BCRX_STA_KEY: | |
| local->bcrx_sta_key = value; | |
| break; | |
| case PRISM2_PARAM_IEEE_802_1X: | |
| local->ieee_802_1x = value; | |
| break; | |
| case PRISM2_PARAM_ANTSEL_TX: | |
| if (value < 0 || value > HOSTAP_ANTSEL_HIGH) { | |
| ret = -EINVAL; | |
| break; | |
| } | |
| local->antsel_tx = value; | |
| hostap_set_antsel(local); | |
| break; | |
| case PRISM2_PARAM_ANTSEL_RX: | |
| if (value < 0 || value > HOSTAP_ANTSEL_HIGH) { | |
| ret = -EINVAL; | |
| break; | |
| } | |
| local->antsel_rx = value; | |
| hostap_set_antsel(local); | |
| break; | |
| case PRISM2_PARAM_MONITOR_TYPE: | |
| if (value != PRISM2_MONITOR_80211 && | |
| value != PRISM2_MONITOR_CAPHDR && | |
| value != PRISM2_MONITOR_PRISM && | |
| value != PRISM2_MONITOR_RADIOTAP) { | |
| ret = -EINVAL; | |
| break; | |
| } | |
| local->monitor_type = value; | |
| if (local->iw_mode == IW_MODE_MONITOR) | |
| hostap_monitor_set_type(local); | |
| break; | |
| case PRISM2_PARAM_WDS_TYPE: | |
| local->wds_type = value; | |
| break; | |
| case PRISM2_PARAM_HOSTSCAN: | |
| { | |
| struct hfa384x_hostscan_request scan_req; | |
| u16 rate; | |
| memset(&scan_req, 0, sizeof(scan_req)); | |
| scan_req.channel_list = cpu_to_le16(0x3fff); | |
| switch (value) { | |
| case 1: rate = HFA384X_RATES_1MBPS; break; | |
| case 2: rate = HFA384X_RATES_2MBPS; break; | |
| case 3: rate = HFA384X_RATES_5MBPS; break; | |
| case 4: rate = HFA384X_RATES_11MBPS; break; | |
| default: rate = HFA384X_RATES_1MBPS; break; | |
| } | |
| scan_req.txrate = cpu_to_le16(rate); | |
| /* leave SSID empty to accept all SSIDs */ | |
| if (local->iw_mode == IW_MODE_MASTER) { | |
| if (hostap_set_word(dev, HFA384X_RID_CNFPORTTYPE, | |
| HFA384X_PORTTYPE_BSS) || | |
| local->func->reset_port(dev)) | |
| printk(KERN_DEBUG "Leaving Host AP mode " | |
| "for HostScan failed\n"); | |
| } | |
| if (local->func->set_rid(dev, HFA384X_RID_HOSTSCAN, &scan_req, | |
| sizeof(scan_req))) { | |
| printk(KERN_DEBUG "HOSTSCAN failed\n"); | |
| ret = -EINVAL; | |
| } | |
| if (local->iw_mode == IW_MODE_MASTER) { | |
| wait_queue_t __wait; | |
| init_waitqueue_entry(&__wait, current); | |
| add_wait_queue(&local->hostscan_wq, &__wait); | |
| set_current_state(TASK_INTERRUPTIBLE); | |
| schedule_timeout(HZ); | |
| if (signal_pending(current)) | |
| ret = -EINTR; | |
| set_current_state(TASK_RUNNING); | |
| remove_wait_queue(&local->hostscan_wq, &__wait); | |
| if (hostap_set_word(dev, HFA384X_RID_CNFPORTTYPE, | |
| HFA384X_PORTTYPE_HOSTAP) || | |
| local->func->reset_port(dev)) | |
| printk(KERN_DEBUG "Returning to Host AP mode " | |
| "after HostScan failed\n"); | |
| } | |
| break; | |
| } | |
| case PRISM2_PARAM_AP_SCAN: | |
| local->passive_scan_interval = value; | |
| if (timer_pending(&local->passive_scan_timer)) | |
| del_timer(&local->passive_scan_timer); | |
| if (value > 0 && value < INT_MAX / HZ) { | |
| local->passive_scan_timer.expires = jiffies + | |
| local->passive_scan_interval * HZ; | |
| add_timer(&local->passive_scan_timer); | |
| } | |
| break; | |
| case PRISM2_PARAM_ENH_SEC: | |
| if (value < 0 || value > 3) { | |
| ret = -EINVAL; | |
| break; | |
| } | |
| local->enh_sec = value; | |
| if (hostap_set_word(dev, HFA384X_RID_CNFENHSECURITY, | |
| local->enh_sec) || | |
| local->func->reset_port(dev)) { | |
| printk(KERN_INFO "%s: cnfEnhSecurity requires STA f/w " | |
| "1.6.3 or newer\n", dev->name); | |
| ret = -EOPNOTSUPP; | |
| } | |
| break; | |
| #ifdef PRISM2_IO_DEBUG | |
| case PRISM2_PARAM_IO_DEBUG: | |
| local->io_debug_enabled = value; | |
| break; | |
| #endif /* PRISM2_IO_DEBUG */ | |
| case PRISM2_PARAM_BASIC_RATES: | |
| if ((value & local->tx_rate_control) != value || value == 0) { | |
| printk(KERN_INFO "%s: invalid basic rate set - basic " | |
| "rates must be in supported rate set\n", | |
| dev->name); | |
| ret = -EINVAL; | |
| break; | |
| } | |
| local->basic_rates = value; | |
| if (hostap_set_word(dev, HFA384X_RID_CNFBASICRATES, | |
| local->basic_rates) || | |
| local->func->reset_port(dev)) | |
| ret = -EINVAL; | |
| break; | |
| case PRISM2_PARAM_OPER_RATES: | |
| local->tx_rate_control = value; | |
| if (hostap_set_rate(dev)) | |
| ret = -EINVAL; | |
| break; | |
| case PRISM2_PARAM_HOSTAPD: | |
| ret = hostap_set_hostapd(local, value, 1); | |
| break; | |
| case PRISM2_PARAM_HOSTAPD_STA: | |
| ret = hostap_set_hostapd_sta(local, value, 1); | |
| break; | |
| case PRISM2_PARAM_WPA: | |
| local->wpa = value; | |
| if (local->sta_fw_ver < PRISM2_FW_VER(1,7,0)) | |
| ret = -EOPNOTSUPP; | |
| else if (hostap_set_word(dev, HFA384X_RID_SSNHANDLINGMODE, | |
| value ? 1 : 0)) | |
| ret = -EINVAL; | |
| break; | |
| case PRISM2_PARAM_PRIVACY_INVOKED: | |
| local->privacy_invoked = value; | |
| if (hostap_set_encryption(local) || | |
| local->func->reset_port(dev)) | |
| ret = -EINVAL; | |
| break; | |
| case PRISM2_PARAM_TKIP_COUNTERMEASURES: | |
| local->tkip_countermeasures = value; | |
| break; | |
| case PRISM2_PARAM_DROP_UNENCRYPTED: | |
| local->drop_unencrypted = value; | |
| break; | |
| case PRISM2_PARAM_SCAN_CHANNEL_MASK: | |
| local->scan_channel_mask = value; | |
| break; | |
| default: | |
| printk(KERN_DEBUG "%s: prism2_param: unknown param %d\n", | |
| dev->name, param); | |
| ret = -EOPNOTSUPP; | |
| break; | |
| } | |
| return ret; | |
| } | |
| static int prism2_ioctl_priv_get_prism2_param(struct net_device *dev, | |
| struct iw_request_info *info, | |
| void *wrqu, char *extra) | |
| { | |
| struct hostap_interface *iface; | |
| local_info_t *local; | |
| int *param = (int *) extra; | |
| int ret = 0; | |
| iface = netdev_priv(dev); | |
| local = iface->local; | |
| switch (*param) { | |
| case PRISM2_PARAM_TXRATECTRL: | |
| *param = local->fw_tx_rate_control; | |
| break; | |
| case PRISM2_PARAM_BEACON_INT: | |
| *param = local->beacon_int; | |
| break; | |
| case PRISM2_PARAM_PSEUDO_IBSS: | |
| *param = local->pseudo_adhoc; | |
| break; | |
| case PRISM2_PARAM_ALC: | |
| ret = -EOPNOTSUPP; /* FIX */ | |
| break; | |
| case PRISM2_PARAM_DUMP: | |
| *param = local->frame_dump; | |
| break; | |
| case PRISM2_PARAM_OTHER_AP_POLICY: | |
| if (local->ap != NULL) | |
| *param = local->ap->ap_policy; | |
| else | |
| ret = -EOPNOTSUPP; | |
| break; | |
| case PRISM2_PARAM_AP_MAX_INACTIVITY: | |
| if (local->ap != NULL) | |
| *param = local->ap->max_inactivity / HZ; | |
| else | |
| ret = -EOPNOTSUPP; | |
| break; | |
| case PRISM2_PARAM_AP_BRIDGE_PACKETS: | |
| if (local->ap != NULL) | |
| *param = local->ap->bridge_packets; | |
| else | |
| ret = -EOPNOTSUPP; | |
| break; | |
| case PRISM2_PARAM_DTIM_PERIOD: | |
| *param = local->dtim_period; | |
| break; | |
| case PRISM2_PARAM_AP_NULLFUNC_ACK: | |
| if (local->ap != NULL) | |
| *param = local->ap->nullfunc_ack; | |
| else | |
| ret = -EOPNOTSUPP; | |
| break; | |
| case PRISM2_PARAM_MAX_WDS: | |
| *param = local->wds_max_connections; | |
| break; | |
| case PRISM2_PARAM_AP_AUTOM_AP_WDS: | |
| if (local->ap != NULL) | |
| *param = local->ap->autom_ap_wds; | |
| else | |
| ret = -EOPNOTSUPP; | |
| break; | |
| case PRISM2_PARAM_AP_AUTH_ALGS: | |
| *param = local->auth_algs; | |
| break; | |
| case PRISM2_PARAM_MONITOR_ALLOW_FCSERR: | |
| *param = local->monitor_allow_fcserr; | |
| break; | |
| case PRISM2_PARAM_HOST_ENCRYPT: | |
| *param = local->host_encrypt; | |
| break; | |
| case PRISM2_PARAM_HOST_DECRYPT: | |
| *param = local->host_decrypt; | |
| break; | |
| case PRISM2_PARAM_HOST_ROAMING: | |
| *param = local->host_roaming; | |
| break; | |
| case PRISM2_PARAM_BCRX_STA_KEY: | |
| *param = local->bcrx_sta_key; | |
| break; | |
| case PRISM2_PARAM_IEEE_802_1X: | |
| *param = local->ieee_802_1x; | |
| break; | |
| case PRISM2_PARAM_ANTSEL_TX: | |
| *param = local->antsel_tx; | |
| break; | |
| case PRISM2_PARAM_ANTSEL_RX: | |
| *param = local->antsel_rx; | |
| break; | |
| case PRISM2_PARAM_MONITOR_TYPE: | |
| *param = local->monitor_type; | |
| break; | |
| case PRISM2_PARAM_WDS_TYPE: | |
| *param = local->wds_type; | |
| break; | |
| case PRISM2_PARAM_HOSTSCAN: | |
| ret = -EOPNOTSUPP; | |
| break; | |
| case PRISM2_PARAM_AP_SCAN: | |
| *param = local->passive_scan_interval; | |
| break; | |
| case PRISM2_PARAM_ENH_SEC: | |
| *param = local->enh_sec; | |
| break; | |
| #ifdef PRISM2_IO_DEBUG | |
| case PRISM2_PARAM_IO_DEBUG: | |
| *param = local->io_debug_enabled; | |
| break; | |
| #endif /* PRISM2_IO_DEBUG */ | |
| case PRISM2_PARAM_BASIC_RATES: | |
| *param = local->basic_rates; | |
| break; | |
| case PRISM2_PARAM_OPER_RATES: | |
| *param = local->tx_rate_control; | |
| break; | |
| case PRISM2_PARAM_HOSTAPD: | |
| *param = local->hostapd; | |
| break; | |
| case PRISM2_PARAM_HOSTAPD_STA: | |
| *param = local->hostapd_sta; | |
| break; | |
| case PRISM2_PARAM_WPA: | |
| if (local->sta_fw_ver < PRISM2_FW_VER(1,7,0)) | |
| ret = -EOPNOTSUPP; | |
| *param = local->wpa; | |
| break; | |
| case PRISM2_PARAM_PRIVACY_INVOKED: | |
| *param = local->privacy_invoked; | |
| break; | |
| case PRISM2_PARAM_TKIP_COUNTERMEASURES: | |
| *param = local->tkip_countermeasures; | |
| break; | |
| case PRISM2_PARAM_DROP_UNENCRYPTED: | |
| *param = local->drop_unencrypted; | |
| break; | |
| case PRISM2_PARAM_SCAN_CHANNEL_MASK: | |
| *param = local->scan_channel_mask; | |
| break; | |
| default: | |
| printk(KERN_DEBUG "%s: get_prism2_param: unknown param %d\n", | |
| dev->name, *param); | |
| ret = -EOPNOTSUPP; | |
| break; | |
| } | |
| return ret; | |
| } | |
| static int prism2_ioctl_priv_readmif(struct net_device *dev, | |
| struct iw_request_info *info, | |
| void *wrqu, char *extra) | |
| { | |
| struct hostap_interface *iface; | |
| local_info_t *local; | |
| u16 resp0; | |
| iface = netdev_priv(dev); | |
| local = iface->local; | |
| if (local->func->cmd(dev, HFA384X_CMDCODE_READMIF, *extra, NULL, | |
| &resp0)) | |
| return -EOPNOTSUPP; | |
| else | |
| *extra = resp0; | |
| return 0; | |
| } | |
| static int prism2_ioctl_priv_writemif(struct net_device *dev, | |
| struct iw_request_info *info, | |
| void *wrqu, char *extra) | |
| { | |
| struct hostap_interface *iface; | |
| local_info_t *local; | |
| u16 cr, val; | |
| iface = netdev_priv(dev); | |
| local = iface->local; | |
| cr = *extra; | |
| val = *(extra + 1); | |
| if (local->func->cmd(dev, HFA384X_CMDCODE_WRITEMIF, cr, &val, NULL)) | |
| return -EOPNOTSUPP; | |
| return 0; | |
| } | |
| static int prism2_ioctl_priv_monitor(struct net_device *dev, int *i) | |
| { | |
| struct hostap_interface *iface; | |
| local_info_t *local; | |
| int ret = 0; | |
| u32 mode; | |
| iface = netdev_priv(dev); | |
| local = iface->local; | |
| printk(KERN_DEBUG "%s: process %d (%s) used deprecated iwpriv monitor " | |
| "- update software to use iwconfig mode monitor\n", | |
| dev->name, task_pid_nr(current), current->comm); | |
| /* Backward compatibility code - this can be removed at some point */ | |
| if (*i == 0) { | |
| /* Disable monitor mode - old mode was not saved, so go to | |
| * Master mode */ | |
| mode = IW_MODE_MASTER; | |
| ret = prism2_ioctl_siwmode(dev, NULL, &mode, NULL); | |
| } else if (*i == 1) { | |
| /* netlink socket mode is not supported anymore since it did | |
| * not separate different devices from each other and was not | |
| * best method for delivering large amount of packets to | |
| * user space */ | |
| ret = -EOPNOTSUPP; | |
| } else if (*i == 2 || *i == 3) { | |
| switch (*i) { | |
| case 2: | |
| local->monitor_type = PRISM2_MONITOR_80211; | |
| break; | |
| case 3: | |
| local->monitor_type = PRISM2_MONITOR_PRISM; | |
| break; | |
| } | |
| mode = IW_MODE_MONITOR; | |
| ret = prism2_ioctl_siwmode(dev, NULL, &mode, NULL); | |
| hostap_monitor_mode_enable(local); | |
| } else | |
| ret = -EINVAL; | |
| return ret; | |
| } | |
| static int prism2_ioctl_priv_reset(struct net_device *dev, int *i) | |
| { | |
| struct hostap_interface *iface; | |
| local_info_t *local; | |
| iface = netdev_priv(dev); | |
| local = iface->local; | |
| printk(KERN_DEBUG "%s: manual reset request(%d)\n", dev->name, *i); | |
| switch (*i) { | |
| case 0: | |
| /* Disable and enable card */ | |
| local->func->hw_shutdown(dev, 1); | |
| local->func->hw_config(dev, 0); | |
| break; | |
| case 1: | |
| /* COR sreset */ | |
| local->func->hw_reset(dev); | |
| break; | |
| case 2: | |
| /* Disable and enable port 0 */ | |
| local->func->reset_port(dev); | |
| break; | |
| case 3: | |
| prism2_sta_deauth(local, WLAN_REASON_DEAUTH_LEAVING); | |
| if (local->func->cmd(dev, HFA384X_CMDCODE_DISABLE, 0, NULL, | |
| NULL)) | |
| return -EINVAL; | |
| break; | |
| case 4: | |
| if (local->func->cmd(dev, HFA384X_CMDCODE_ENABLE, 0, NULL, | |
| NULL)) | |
| return -EINVAL; | |
| break; | |
| default: | |
| printk(KERN_DEBUG "Unknown reset request %d\n", *i); | |
| return -EOPNOTSUPP; | |
| } | |
| return 0; | |
| } | |
| static int prism2_ioctl_priv_set_rid_word(struct net_device *dev, int *i) | |
| { | |
| int rid = *i; | |
| int value = *(i + 1); | |
| printk(KERN_DEBUG "%s: Set RID[0x%X] = %d\n", dev->name, rid, value); | |
| if (hostap_set_word(dev, rid, value)) | |
| return -EINVAL; | |
| return 0; | |
| } | |
| #ifndef PRISM2_NO_KERNEL_IEEE80211_MGMT | |
| static int ap_mac_cmd_ioctl(local_info_t *local, int *cmd) | |
| { | |
| int ret = 0; | |
| switch (*cmd) { | |
| case AP_MAC_CMD_POLICY_OPEN: | |
| local->ap->mac_restrictions.policy = MAC_POLICY_OPEN; | |
| break; | |
| case AP_MAC_CMD_POLICY_ALLOW: | |
| local->ap->mac_restrictions.policy = MAC_POLICY_ALLOW; | |
| break; | |
| case AP_MAC_CMD_POLICY_DENY: | |
| local->ap->mac_restrictions.policy = MAC_POLICY_DENY; | |
| break; | |
| case AP_MAC_CMD_FLUSH: | |
| ap_control_flush_macs(&local->ap->mac_restrictions); | |
| break; | |
| case AP_MAC_CMD_KICKALL: | |
| ap_control_kickall(local->ap); | |
| hostap_deauth_all_stas(local->dev, local->ap, 0); | |
| break; | |
| default: | |
| ret = -EOPNOTSUPP; | |
| break; | |
| } | |
| return ret; | |
| } | |
| #endif /* PRISM2_NO_KERNEL_IEEE80211_MGMT */ | |
| #ifdef PRISM2_DOWNLOAD_SUPPORT | |
| static int prism2_ioctl_priv_download(local_info_t *local, struct iw_point *p) | |
| { | |
| struct prism2_download_param *param; | |
| int ret = 0; | |
| if (p->length < sizeof(struct prism2_download_param) || | |
| p->length > 1024 || !p->pointer) | |
| return -EINVAL; | |
| param = kmalloc(p->length, GFP_KERNEL); | |
| if (param == NULL) | |
| return -ENOMEM; | |
| if (copy_from_user(param, p->pointer, p->length)) { | |
| ret = -EFAULT; | |
| goto out; | |
| } | |
| if (p->length < sizeof(struct prism2_download_param) + | |
| param->num_areas * sizeof(struct prism2_download_area)) { | |
| ret = -EINVAL; | |
| goto out; | |
| } | |
| ret = local->func->download(local, param); | |
| out: | |
| kfree(param); | |
| return ret; | |
| } | |
| #endif /* PRISM2_DOWNLOAD_SUPPORT */ | |
| static int prism2_set_genericelement(struct net_device *dev, u8 *elem, | |
| size_t len) | |
| { | |
| struct hostap_interface *iface = netdev_priv(dev); | |
| local_info_t *local = iface->local; | |
| u8 *buf; | |
| /* | |
| * Add 16-bit length in the beginning of the buffer because Prism2 RID | |
| * includes it. | |
| */ | |
| buf = kmalloc(len + 2, GFP_KERNEL); | |
| if (buf == NULL) | |
| return -ENOMEM; | |
| *((__le16 *) buf) = cpu_to_le16(len); | |
| memcpy(buf + 2, elem, len); | |
| kfree(local->generic_elem); | |
| local->generic_elem = buf; | |
| local->generic_elem_len = len + 2; | |
| return local->func->set_rid(local->dev, HFA384X_RID_GENERICELEMENT, | |
| buf, len + 2); | |
| } | |
| static int prism2_ioctl_siwauth(struct net_device *dev, | |
| struct iw_request_info *info, | |
| struct iw_param *data, char *extra) | |
| { | |
| struct hostap_interface *iface = netdev_priv(dev); | |
| local_info_t *local = iface->local; | |
| switch (data->flags & IW_AUTH_INDEX) { | |
| case IW_AUTH_WPA_VERSION: | |
| case IW_AUTH_CIPHER_PAIRWISE: | |
| case IW_AUTH_CIPHER_GROUP: | |
| case IW_AUTH_KEY_MGMT: | |
| /* | |
| * Host AP driver does not use these parameters and allows | |
| * wpa_supplicant to control them internally. | |
| */ | |
| break; | |
| case IW_AUTH_TKIP_COUNTERMEASURES: | |
| local->tkip_countermeasures = data->value; | |
| break; | |
| case IW_AUTH_DROP_UNENCRYPTED: | |
| local->drop_unencrypted = data->value; | |
| break; | |
| case IW_AUTH_80211_AUTH_ALG: | |
| local->auth_algs = data->value; | |
| break; | |
| case IW_AUTH_WPA_ENABLED: | |
| if (data->value == 0) { | |
| local->wpa = 0; | |
| if (local->sta_fw_ver < PRISM2_FW_VER(1,7,0)) | |
| break; | |
| prism2_set_genericelement(dev, "", 0); | |
| local->host_roaming = 0; | |
| local->privacy_invoked = 0; | |
| if (hostap_set_word(dev, HFA384X_RID_SSNHANDLINGMODE, | |
| 0) || | |
| hostap_set_roaming(local) || | |
| hostap_set_encryption(local) || | |
| local->func->reset_port(dev)) | |
| return -EINVAL; | |
| break; | |
| } | |
| if (local->sta_fw_ver < PRISM2_FW_VER(1,7,0)) | |
| return -EOPNOTSUPP; | |
| local->host_roaming = 2; | |
| local->privacy_invoked = 1; | |
| local->wpa = 1; | |
| if (hostap_set_word(dev, HFA384X_RID_SSNHANDLINGMODE, 1) || | |
| hostap_set_roaming(local) || | |
| hostap_set_encryption(local) || | |
| local->func->reset_port(dev)) | |
| return -EINVAL; | |
| break; | |
| case IW_AUTH_RX_UNENCRYPTED_EAPOL: | |
| local->ieee_802_1x = data->value; | |
| break; | |
| case IW_AUTH_PRIVACY_INVOKED: | |
| local->privacy_invoked = data->value; | |
| break; | |
| default: | |
| return -EOPNOTSUPP; | |
| } | |
| return 0; | |
| } | |
| static int prism2_ioctl_giwauth(struct net_device *dev, | |
| struct iw_request_info *info, | |
| struct iw_param *data, char *extra) | |
| { | |
| struct hostap_interface *iface = netdev_priv(dev); | |
| local_info_t *local = iface->local; | |
| switch (data->flags & IW_AUTH_INDEX) { | |
| case IW_AUTH_WPA_VERSION: | |
| case IW_AUTH_CIPHER_PAIRWISE: | |
| case IW_AUTH_CIPHER_GROUP: | |
| case IW_AUTH_KEY_MGMT: | |
| /* | |
| * Host AP driver does not use these parameters and allows | |
| * wpa_supplicant to control them internally. | |
| */ | |
| return -EOPNOTSUPP; | |
| case IW_AUTH_TKIP_COUNTERMEASURES: | |
| data->value = local->tkip_countermeasures; | |
| break; | |
| case IW_AUTH_DROP_UNENCRYPTED: | |
| data->value = local->drop_unencrypted; | |
| break; | |
| case IW_AUTH_80211_AUTH_ALG: | |
| data->value = local->auth_algs; | |
| break; | |
| case IW_AUTH_WPA_ENABLED: | |
| data->value = local->wpa; | |
| break; | |
| case IW_AUTH_RX_UNENCRYPTED_EAPOL: | |
| data->value = local->ieee_802_1x; | |
| break; | |
| default: | |
| return -EOPNOTSUPP; | |
| } | |
| return 0; | |
| } | |
| static int prism2_ioctl_siwencodeext(struct net_device *dev, | |
| struct iw_request_info *info, | |
| struct iw_point *erq, char *extra) | |
| { | |
| struct hostap_interface *iface = netdev_priv(dev); | |
| local_info_t *local = iface->local; | |
| struct iw_encode_ext *ext = (struct iw_encode_ext *) extra; | |
| int i, ret = 0; | |
| struct lib80211_crypto_ops *ops; | |
| struct lib80211_crypt_data **crypt; | |
| void *sta_ptr; | |
| u8 *addr; | |
| const char *alg, *module; | |
| i = erq->flags & IW_ENCODE_INDEX; | |
| if (i > WEP_KEYS) | |
| return -EINVAL; | |
| if (i < 1 || i > WEP_KEYS) | |
| i = local->crypt_info.tx_keyidx; | |
| else | |
| i--; | |
| if (i < 0 || i >= WEP_KEYS) | |
| return -EINVAL; | |
| addr = ext->addr.sa_data; | |
| if (is_broadcast_ether_addr(addr)) { | |
| sta_ptr = NULL; | |
| crypt = &local->crypt_info.crypt[i]; | |
| } else { | |
| if (i != 0) | |
| return -EINVAL; | |
| sta_ptr = ap_crypt_get_ptrs(local->ap, addr, 0, &crypt); | |
| if (sta_ptr == NULL) { | |
| if (local->iw_mode == IW_MODE_INFRA) { | |
| /* | |
| * TODO: add STA entry for the current AP so | |
| * that unicast key can be used. For now, this | |
| * is emulated by using default key idx 0. | |
| */ | |
| i = 0; | |
| crypt = &local->crypt_info.crypt[i]; | |
| } else | |
| return -EINVAL; | |
| } | |
| } | |
| if ((erq->flags & IW_ENCODE_DISABLED) || | |
| ext->alg == IW_ENCODE_ALG_NONE) { | |
| if (*crypt) | |
| lib80211_crypt_delayed_deinit(&local->crypt_info, crypt); | |
| goto done; | |
| } | |
| switch (ext->alg) { | |
| case IW_ENCODE_ALG_WEP: | |
| alg = "WEP"; | |
| module = "lib80211_crypt_wep"; | |
| break; | |
| case IW_ENCODE_ALG_TKIP: | |
| alg = "TKIP"; | |
| module = "lib80211_crypt_tkip"; | |
| break; | |
| case IW_ENCODE_ALG_CCMP: | |
| alg = "CCMP"; | |
| module = "lib80211_crypt_ccmp"; | |
| break; | |
| default: | |
| printk(KERN_DEBUG "%s: unsupported algorithm %d\n", | |
| local->dev->name, ext->alg); | |
| ret = -EOPNOTSUPP; | |
| goto done; | |
| } | |
| ops = lib80211_get_crypto_ops(alg); | |
| if (ops == NULL) { | |
| request_module(module); | |
| ops = lib80211_get_crypto_ops(alg); | |
| } | |
| if (ops == NULL) { | |
| printk(KERN_DEBUG "%s: unknown crypto alg '%s'\n", | |
| local->dev->name, alg); | |
| ret = -EOPNOTSUPP; | |
| goto done; | |
| } | |
| if (sta_ptr || ext->alg != IW_ENCODE_ALG_WEP) { | |
| /* | |
| * Per station encryption and other than WEP algorithms | |
| * require host-based encryption, so force them on | |
| * automatically. | |
| */ | |
| local->host_decrypt = local->host_encrypt = 1; | |
| } | |
| if (*crypt == NULL || (*crypt)->ops != ops) { | |
| struct lib80211_crypt_data *new_crypt; | |
| lib80211_crypt_delayed_deinit(&local->crypt_info, crypt); | |
| new_crypt = kzalloc(sizeof(struct lib80211_crypt_data), | |
| GFP_KERNEL); | |
| if (new_crypt == NULL) { | |
| ret = -ENOMEM; | |
| goto done; | |
| } | |
| new_crypt->ops = ops; | |
| if (new_crypt->ops && try_module_get(new_crypt->ops->owner)) | |
| new_crypt->priv = new_crypt->ops->init(i); | |
| if (new_crypt->priv == NULL) { | |
| kfree(new_crypt); | |
| ret = -EINVAL; | |
| goto done; | |
| } | |
| *crypt = new_crypt; | |
| } | |
| /* | |
| * TODO: if ext_flags does not have IW_ENCODE_EXT_RX_SEQ_VALID, the | |
| * existing seq# should not be changed. | |
| * TODO: if ext_flags has IW_ENCODE_EXT_TX_SEQ_VALID, next TX seq# | |
| * should be changed to something else than zero. | |
| */ | |
| if ((!(ext->ext_flags & IW_ENCODE_EXT_SET_TX_KEY) || ext->key_len > 0) | |
| && (*crypt)->ops->set_key && | |
| (*crypt)->ops->set_key(ext->key, ext->key_len, ext->rx_seq, | |
| (*crypt)->priv) < 0) { | |
| printk(KERN_DEBUG "%s: key setting failed\n", | |
| local->dev->name); | |
| ret = -EINVAL; | |
| goto done; | |
| } | |
| if (ext->ext_flags & IW_ENCODE_EXT_SET_TX_KEY) { | |
| if (!sta_ptr) | |
| local->crypt_info.tx_keyidx = i; | |
| } | |
| if (sta_ptr == NULL && ext->key_len > 0) { | |
| int first = 1, j; | |
| for (j = 0; j < WEP_KEYS; j++) { | |
| if (j != i && local->crypt_info.crypt[j]) { | |
| first = 0; | |
| break; | |
| } | |
| } | |
| if (first) | |
| local->crypt_info.tx_keyidx = i; | |
| } | |
| done: | |
| if (sta_ptr) | |
| hostap_handle_sta_release(sta_ptr); | |
| local->open_wep = erq->flags & IW_ENCODE_OPEN; | |
| /* | |
| * Do not reset port0 if card is in Managed mode since resetting will | |
| * generate new IEEE 802.11 authentication which may end up in looping | |
| * with IEEE 802.1X. Prism2 documentation seem to require port reset | |
| * after WEP configuration. However, keys are apparently changed at | |
| * least in Managed mode. | |
| */ | |
| if (ret == 0 && | |
| (hostap_set_encryption(local) || | |
| (local->iw_mode != IW_MODE_INFRA && | |
| local->func->reset_port(local->dev)))) | |
| ret = -EINVAL; | |
| return ret; | |
| } | |
| static int prism2_ioctl_giwencodeext(struct net_device *dev, | |
| struct iw_request_info *info, | |
| struct iw_point *erq, char *extra) | |
| { | |
| struct hostap_interface *iface = netdev_priv(dev); | |
| local_info_t *local = iface->local; | |
| struct lib80211_crypt_data **crypt; | |
| void *sta_ptr; | |
| int max_key_len, i; | |
| struct iw_encode_ext *ext = (struct iw_encode_ext *) extra; | |
| u8 *addr; | |
| max_key_len = erq->length - sizeof(*ext); | |
| if (max_key_len < 0) | |
| return -EINVAL; | |
| i = erq->flags & IW_ENCODE_INDEX; | |
| if (i < 1 || i > WEP_KEYS) | |
| i = local->crypt_info.tx_keyidx; | |
| else | |
| i--; | |
| addr = ext->addr.sa_data; | |
| if (is_broadcast_ether_addr(addr)) { | |
| sta_ptr = NULL; | |
| crypt = &local->crypt_info.crypt[i]; | |
| } else { | |
| i = 0; | |
| sta_ptr = ap_crypt_get_ptrs(local->ap, addr, 0, &crypt); | |
| if (sta_ptr == NULL) | |
| return -EINVAL; | |
| } | |
| erq->flags = i + 1; | |
| memset(ext, 0, sizeof(*ext)); | |
| if (*crypt == NULL || (*crypt)->ops == NULL) { | |
| ext->alg = IW_ENCODE_ALG_NONE; | |
| ext->key_len = 0; | |
| erq->flags |= IW_ENCODE_DISABLED; | |
| } else { | |
| if (strcmp((*crypt)->ops->name, "WEP") == 0) | |
| ext->alg = IW_ENCODE_ALG_WEP; | |
| else if (strcmp((*crypt)->ops->name, "TKIP") == 0) | |
| ext->alg = IW_ENCODE_ALG_TKIP; | |
| else if (strcmp((*crypt)->ops->name, "CCMP") == 0) | |
| ext->alg = IW_ENCODE_ALG_CCMP; | |
| else | |
| return -EINVAL; | |
| if ((*crypt)->ops->get_key) { | |
| ext->key_len = | |
| (*crypt)->ops->get_key(ext->key, | |
| max_key_len, | |
| ext->tx_seq, | |
| (*crypt)->priv); | |
| if (ext->key_len && | |
| (ext->alg == IW_ENCODE_ALG_TKIP || | |
| ext->alg == IW_ENCODE_ALG_CCMP)) | |
| ext->ext_flags |= IW_ENCODE_EXT_TX_SEQ_VALID; | |
| } | |
| } | |
| if (sta_ptr) | |
| hostap_handle_sta_release(sta_ptr); | |
| return 0; | |
| } | |
| static int prism2_ioctl_set_encryption(local_info_t *local, | |
| struct prism2_hostapd_param *param, | |
| int param_len) | |
| { | |
| int ret = 0; | |
| struct lib80211_crypto_ops *ops; | |
| struct lib80211_crypt_data **crypt; | |
| void *sta_ptr; | |
| param->u.crypt.err = 0; | |
| param->u.crypt.alg[HOSTAP_CRYPT_ALG_NAME_LEN - 1] = '\0'; | |
| if (param_len != | |
| (int) ((char *) param->u.crypt.key - (char *) param) + | |
| param->u.crypt.key_len) | |
| return -EINVAL; | |
| if (is_broadcast_ether_addr(param->sta_addr)) { | |
| if (param->u.crypt.idx >= WEP_KEYS) | |
| return -EINVAL; | |
| sta_ptr = NULL; | |
| crypt = &local->crypt_info.crypt[param->u.crypt.idx]; | |
| } else { | |
| if (param->u.crypt.idx) | |
| return -EINVAL; | |
| sta_ptr = ap_crypt_get_ptrs( | |
| local->ap, param->sta_addr, | |
| (param->u.crypt.flags & HOSTAP_CRYPT_FLAG_PERMANENT), | |
| &crypt); | |
| if (sta_ptr == NULL) { | |
| param->u.crypt.err = HOSTAP_CRYPT_ERR_UNKNOWN_ADDR; | |
| return -EINVAL; | |
| } | |
| } | |
| if (strcmp(param->u.crypt.alg, "none") == 0) { | |
| if (crypt) | |
| lib80211_crypt_delayed_deinit(&local->crypt_info, crypt); | |
| goto done; | |
| } | |
| ops = lib80211_get_crypto_ops(param->u.crypt.alg); | |
| if (ops == NULL && strcmp(param->u.crypt.alg, "WEP") == 0) { | |
| request_module("lib80211_crypt_wep"); | |
| ops = lib80211_get_crypto_ops(param->u.crypt.alg); | |
| } else if (ops == NULL && strcmp(param->u.crypt.alg, "TKIP") == 0) { | |
| request_module("lib80211_crypt_tkip"); | |
| ops = lib80211_get_crypto_ops(param->u.crypt.alg); | |
| } else if (ops == NULL && strcmp(param->u.crypt.alg, "CCMP") == 0) { | |
| request_module("lib80211_crypt_ccmp"); | |
| ops = lib80211_get_crypto_ops(param->u.crypt.alg); | |
| } | |
| if (ops == NULL) { | |
| printk(KERN_DEBUG "%s: unknown crypto alg '%s'\n", | |
| local->dev->name, param->u.crypt.alg); | |
| param->u.crypt.err = HOSTAP_CRYPT_ERR_UNKNOWN_ALG; | |
| ret = -EINVAL; | |
| goto done; | |
| } | |
| /* station based encryption and other than WEP algorithms require | |
| * host-based encryption, so force them on automatically */ | |
| local->host_decrypt = local->host_encrypt = 1; | |
| if (*crypt == NULL || (*crypt)->ops != ops) { | |
| struct lib80211_crypt_data *new_crypt; | |
| lib80211_crypt_delayed_deinit(&local->crypt_info, crypt); | |
| new_crypt = kzalloc(sizeof(struct lib80211_crypt_data), | |
| GFP_KERNEL); | |
| if (new_crypt == NULL) { | |
| ret = -ENOMEM; | |
| goto done; | |
| } | |
| new_crypt->ops = ops; | |
| new_crypt->priv = new_crypt->ops->init(param->u.crypt.idx); | |
| if (new_crypt->priv == NULL) { | |
| kfree(new_crypt); | |
| param->u.crypt.err = | |
| HOSTAP_CRYPT_ERR_CRYPT_INIT_FAILED; | |
| ret = -EINVAL; | |
| goto done; | |
| } | |
| *crypt = new_crypt; | |
| } | |
| if ((!(param->u.crypt.flags & HOSTAP_CRYPT_FLAG_SET_TX_KEY) || | |
| param->u.crypt.key_len > 0) && (*crypt)->ops->set_key && | |
| (*crypt)->ops->set_key(param->u.crypt.key, | |
| param->u.crypt.key_len, param->u.crypt.seq, | |
| (*crypt)->priv) < 0) { | |
| printk(KERN_DEBUG "%s: key setting failed\n", | |
| local->dev->name); | |
| param->u.crypt.err = HOSTAP_CRYPT_ERR_KEY_SET_FAILED; | |
| ret = -EINVAL; | |
| goto done; | |
| } | |
| if (param->u.crypt.flags & HOSTAP_CRYPT_FLAG_SET_TX_KEY) { | |
| if (!sta_ptr) | |
| local->crypt_info.tx_keyidx = param->u.crypt.idx; | |
| else if (param->u.crypt.idx) { | |
| printk(KERN_DEBUG "%s: TX key idx setting failed\n", | |
| local->dev->name); | |
| param->u.crypt.err = | |
| HOSTAP_CRYPT_ERR_TX_KEY_SET_FAILED; | |
| ret = -EINVAL; | |
| goto done; | |
| } | |
| } | |
| done: | |
| if (sta_ptr) | |
| hostap_handle_sta_release(sta_ptr); | |
| /* Do not reset port0 if card is in Managed mode since resetting will | |
| * generate new IEEE 802.11 authentication which may end up in looping | |
| * with IEEE 802.1X. Prism2 documentation seem to require port reset | |
| * after WEP configuration. However, keys are apparently changed at | |
| * least in Managed mode. */ | |
| if (ret == 0 && | |
| (hostap_set_encryption(local) || | |
| (local->iw_mode != IW_MODE_INFRA && | |
| local->func->reset_port(local->dev)))) { | |
| param->u.crypt.err = HOSTAP_CRYPT_ERR_CARD_CONF_FAILED; | |
| return -EINVAL; | |
| } | |
| return ret; | |
| } | |
| static int prism2_ioctl_get_encryption(local_info_t *local, | |
| struct prism2_hostapd_param *param, | |
| int param_len) | |
| { | |
| struct lib80211_crypt_data **crypt; | |
| void *sta_ptr; | |
| int max_key_len; | |
| param->u.crypt.err = 0; | |
| max_key_len = param_len - | |
| (int) ((char *) param->u.crypt.key - (char *) param); | |
| if (max_key_len < 0) | |
| return -EINVAL; | |
| if (is_broadcast_ether_addr(param->sta_addr)) { | |
| sta_ptr = NULL; | |
| if (param->u.crypt.idx >= WEP_KEYS) | |
| param->u.crypt.idx = local->crypt_info.tx_keyidx; | |
| crypt = &local->crypt_info.crypt[param->u.crypt.idx]; | |
| } else { | |
| param->u.crypt.idx = 0; | |
| sta_ptr = ap_crypt_get_ptrs(local->ap, param->sta_addr, 0, | |
| &crypt); | |
| if (sta_ptr == NULL) { | |
| param->u.crypt.err = HOSTAP_CRYPT_ERR_UNKNOWN_ADDR; | |
| return -EINVAL; | |
| } | |
| } | |
| if (*crypt == NULL || (*crypt)->ops == NULL) { | |
| memcpy(param->u.crypt.alg, "none", 5); | |
| param->u.crypt.key_len = 0; | |
| param->u.crypt.idx = 0xff; | |
| } else { | |
| strncpy(param->u.crypt.alg, (*crypt)->ops->name, | |
| HOSTAP_CRYPT_ALG_NAME_LEN); | |
| param->u.crypt.key_len = 0; | |
| memset(param->u.crypt.seq, 0, 8); | |
| if ((*crypt)->ops->get_key) { | |
| param->u.crypt.key_len = | |
| (*crypt)->ops->get_key(param->u.crypt.key, | |
| max_key_len, | |
| param->u.crypt.seq, | |
| (*crypt)->priv); | |
| } | |
| } | |
| if (sta_ptr) | |
| hostap_handle_sta_release(sta_ptr); | |
| return 0; | |
| } | |
| static int prism2_ioctl_get_rid(local_info_t *local, | |
| struct prism2_hostapd_param *param, | |
| int param_len) | |
| { | |
| int max_len, res; | |
| max_len = param_len - PRISM2_HOSTAPD_RID_HDR_LEN; | |
| if (max_len < 0) | |
| return -EINVAL; | |
| res = local->func->get_rid(local->dev, param->u.rid.rid, | |
| param->u.rid.data, param->u.rid.len, 0); | |
| if (res >= 0) { | |
| param->u.rid.len = res; | |
| return 0; | |
| } | |
| return res; | |
| } | |
| static int prism2_ioctl_set_rid(local_info_t *local, | |
| struct prism2_hostapd_param *param, | |
| int param_len) | |
| { | |
| int max_len; | |
| max_len = param_len - PRISM2_HOSTAPD_RID_HDR_LEN; | |
| if (max_len < 0 || max_len < param->u.rid.len) | |
| return -EINVAL; | |
| return local->func->set_rid(local->dev, param->u.rid.rid, | |
| param->u.rid.data, param->u.rid.len); | |
| } | |
| static int prism2_ioctl_set_assoc_ap_addr(local_info_t *local, | |
| struct prism2_hostapd_param *param, | |
| int param_len) | |
| { | |
| printk(KERN_DEBUG "%ssta: associated as client with AP %pM\n", | |
| local->dev->name, param->sta_addr); | |
| memcpy(local->assoc_ap_addr, param->sta_addr, ETH_ALEN); | |
| return 0; | |
| } | |
| static int prism2_ioctl_siwgenie(struct net_device *dev, | |
| struct iw_request_info *info, | |
| struct iw_point *data, char *extra) | |
| { | |
| return prism2_set_genericelement(dev, extra, data->length); | |
| } | |
| static int prism2_ioctl_giwgenie(struct net_device *dev, | |
| struct iw_request_info *info, | |
| struct iw_point *data, char *extra) | |
| { | |
| struct hostap_interface *iface = netdev_priv(dev); | |
| local_info_t *local = iface->local; | |
| int len = local->generic_elem_len - 2; | |
| if (len <= 0 || local->generic_elem == NULL) { | |
| data->length = 0; | |
| return 0; | |
| } | |
| if (data->length < len) | |
| return -E2BIG; | |
| data->length = len; | |
| memcpy(extra, local->generic_elem + 2, len); | |
| return 0; | |
| } | |
| static int prism2_ioctl_set_generic_element(local_info_t *local, | |
| struct prism2_hostapd_param *param, | |
| int param_len) | |
| { | |
| int max_len, len; | |
| len = param->u.generic_elem.len; | |
| max_len = param_len - PRISM2_HOSTAPD_GENERIC_ELEMENT_HDR_LEN; | |
| if (max_len < 0 || max_len < len) | |
| return -EINVAL; | |
| return prism2_set_genericelement(local->dev, | |
| param->u.generic_elem.data, len); | |
| } | |
| static int prism2_ioctl_siwmlme(struct net_device *dev, | |
| struct iw_request_info *info, | |
| struct iw_point *data, char *extra) | |
| { | |
| struct hostap_interface *iface = netdev_priv(dev); | |
| local_info_t *local = iface->local; | |
| struct iw_mlme *mlme = (struct iw_mlme *) extra; | |
| __le16 reason; | |
| reason = cpu_to_le16(mlme->reason_code); | |
| switch (mlme->cmd) { | |
| case IW_MLME_DEAUTH: | |
| return prism2_sta_send_mgmt(local, mlme->addr.sa_data, | |
| IEEE80211_STYPE_DEAUTH, | |
| (u8 *) &reason, 2); | |
| case IW_MLME_DISASSOC: | |
| return prism2_sta_send_mgmt(local, mlme->addr.sa_data, | |
| IEEE80211_STYPE_DISASSOC, | |
| (u8 *) &reason, 2); | |
| default: | |
| return -EOPNOTSUPP; | |
| } | |
| } | |
| static int prism2_ioctl_mlme(local_info_t *local, | |
| struct prism2_hostapd_param *param) | |
| { | |
| __le16 reason; | |
| reason = cpu_to_le16(param->u.mlme.reason_code); | |
| switch (param->u.mlme.cmd) { | |
| case MLME_STA_DEAUTH: | |
| return prism2_sta_send_mgmt(local, param->sta_addr, | |
| IEEE80211_STYPE_DEAUTH, | |
| (u8 *) &reason, 2); | |
| case MLME_STA_DISASSOC: | |
| return prism2_sta_send_mgmt(local, param->sta_addr, | |
| IEEE80211_STYPE_DISASSOC, | |
| (u8 *) &reason, 2); | |
| default: | |
| return -EOPNOTSUPP; | |
| } | |
| } | |
| static int prism2_ioctl_scan_req(local_info_t *local, | |
| struct prism2_hostapd_param *param) | |
| { | |
| #ifndef PRISM2_NO_STATION_MODES | |
| if ((local->iw_mode != IW_MODE_INFRA && | |
| local->iw_mode != IW_MODE_ADHOC) || | |
| (local->sta_fw_ver < PRISM2_FW_VER(1,3,1))) | |
| return -EOPNOTSUPP; | |
| if (!local->dev_enabled) | |
| return -ENETDOWN; | |
| return prism2_request_hostscan(local->dev, param->u.scan_req.ssid, | |
| param->u.scan_req.ssid_len); | |
| #else /* PRISM2_NO_STATION_MODES */ | |
| return -EOPNOTSUPP; | |
| #endif /* PRISM2_NO_STATION_MODES */ | |
| } | |
| static int prism2_ioctl_priv_hostapd(local_info_t *local, struct iw_point *p) | |
| { | |
| struct prism2_hostapd_param *param; | |
| int ret = 0; | |
| int ap_ioctl = 0; | |
| if (p->length < sizeof(struct prism2_hostapd_param) || | |
| p->length > PRISM2_HOSTAPD_MAX_BUF_SIZE || !p->pointer) | |
| return -EINVAL; | |
| param = kmalloc(p->length, GFP_KERNEL); | |
| if (param == NULL) | |
| return -ENOMEM; | |
| if (copy_from_user(param, p->pointer, p->length)) { | |
| ret = -EFAULT; | |
| goto out; | |
| } | |
| switch (param->cmd) { | |
| case PRISM2_SET_ENCRYPTION: | |
| ret = prism2_ioctl_set_encryption(local, param, p->length); | |
| break; | |
| case PRISM2_GET_ENCRYPTION: | |
| ret = prism2_ioctl_get_encryption(local, param, p->length); | |
| break; | |
| case PRISM2_HOSTAPD_GET_RID: | |
| ret = prism2_ioctl_get_rid(local, param, p->length); | |
| break; | |
| case PRISM2_HOSTAPD_SET_RID: | |
| ret = prism2_ioctl_set_rid(local, param, p->length); | |
| break; | |
| case PRISM2_HOSTAPD_SET_ASSOC_AP_ADDR: | |
| ret = prism2_ioctl_set_assoc_ap_addr(local, param, p->length); | |
| break; | |
| case PRISM2_HOSTAPD_SET_GENERIC_ELEMENT: | |
| ret = prism2_ioctl_set_generic_element(local, param, | |
| p->length); | |
| break; | |
| case PRISM2_HOSTAPD_MLME: | |
| ret = prism2_ioctl_mlme(local, param); | |
| break; | |
| case PRISM2_HOSTAPD_SCAN_REQ: | |
| ret = prism2_ioctl_scan_req(local, param); | |
| break; | |
| default: | |
| ret = prism2_hostapd(local->ap, param); | |
| ap_ioctl = 1; | |
| break; | |
| } | |
| if (ret == 1 || !ap_ioctl) { | |
| if (copy_to_user(p->pointer, param, p->length)) { | |
| ret = -EFAULT; | |
| goto out; | |
| } else if (ap_ioctl) | |
| ret = 0; | |
| } | |
| out: | |
| kfree(param); | |
| return ret; | |
| } | |
| static void prism2_get_drvinfo(struct net_device *dev, | |
| struct ethtool_drvinfo *info) | |
| { | |
| struct hostap_interface *iface; | |
| local_info_t *local; | |
| iface = netdev_priv(dev); | |
| local = iface->local; | |
| strlcpy(info->driver, "hostap", sizeof(info->driver)); | |
| snprintf(info->fw_version, sizeof(info->fw_version), | |
| "%d.%d.%d", (local->sta_fw_ver >> 16) & 0xff, | |
| (local->sta_fw_ver >> 8) & 0xff, | |
| local->sta_fw_ver & 0xff); | |
| } | |
| const struct ethtool_ops prism2_ethtool_ops = { | |
| .get_drvinfo = prism2_get_drvinfo | |
| }; | |
| /* Structures to export the Wireless Handlers */ | |
| static const iw_handler prism2_handler[] = | |
| { | |
| (iw_handler) NULL, /* SIOCSIWCOMMIT */ | |
| (iw_handler) prism2_get_name, /* SIOCGIWNAME */ | |
| (iw_handler) NULL, /* SIOCSIWNWID */ | |
| (iw_handler) NULL, /* SIOCGIWNWID */ | |
| (iw_handler) prism2_ioctl_siwfreq, /* SIOCSIWFREQ */ | |
| (iw_handler) prism2_ioctl_giwfreq, /* SIOCGIWFREQ */ | |
| (iw_handler) prism2_ioctl_siwmode, /* SIOCSIWMODE */ | |
| (iw_handler) prism2_ioctl_giwmode, /* SIOCGIWMODE */ | |
| (iw_handler) prism2_ioctl_siwsens, /* SIOCSIWSENS */ | |
| (iw_handler) prism2_ioctl_giwsens, /* SIOCGIWSENS */ | |
| (iw_handler) NULL /* not used */, /* SIOCSIWRANGE */ | |
| (iw_handler) prism2_ioctl_giwrange, /* SIOCGIWRANGE */ | |
| (iw_handler) NULL /* not used */, /* SIOCSIWPRIV */ | |
| (iw_handler) NULL /* kernel code */, /* SIOCGIWPRIV */ | |
| (iw_handler) NULL /* not used */, /* SIOCSIWSTATS */ | |
| (iw_handler) NULL /* kernel code */, /* SIOCGIWSTATS */ | |
| iw_handler_set_spy, /* SIOCSIWSPY */ | |
| iw_handler_get_spy, /* SIOCGIWSPY */ | |
| iw_handler_set_thrspy, /* SIOCSIWTHRSPY */ | |
| iw_handler_get_thrspy, /* SIOCGIWTHRSPY */ | |
| (iw_handler) prism2_ioctl_siwap, /* SIOCSIWAP */ | |
| (iw_handler) prism2_ioctl_giwap, /* SIOCGIWAP */ | |
| (iw_handler) prism2_ioctl_siwmlme, /* SIOCSIWMLME */ | |
| (iw_handler) prism2_ioctl_giwaplist, /* SIOCGIWAPLIST */ | |
| (iw_handler) prism2_ioctl_siwscan, /* SIOCSIWSCAN */ | |
| (iw_handler) prism2_ioctl_giwscan, /* SIOCGIWSCAN */ | |
| (iw_handler) prism2_ioctl_siwessid, /* SIOCSIWESSID */ | |
| (iw_handler) prism2_ioctl_giwessid, /* SIOCGIWESSID */ | |
| (iw_handler) prism2_ioctl_siwnickn, /* SIOCSIWNICKN */ | |
| (iw_handler) prism2_ioctl_giwnickn, /* SIOCGIWNICKN */ | |
| (iw_handler) NULL, /* -- hole -- */ | |
| (iw_handler) NULL, /* -- hole -- */ | |
| (iw_handler) prism2_ioctl_siwrate, /* SIOCSIWRATE */ | |
| (iw_handler) prism2_ioctl_giwrate, /* SIOCGIWRATE */ | |
| (iw_handler) prism2_ioctl_siwrts, /* SIOCSIWRTS */ | |
| (iw_handler) prism2_ioctl_giwrts, /* SIOCGIWRTS */ | |
| (iw_handler) prism2_ioctl_siwfrag, /* SIOCSIWFRAG */ | |
| (iw_handler) prism2_ioctl_giwfrag, /* SIOCGIWFRAG */ | |
| (iw_handler) prism2_ioctl_siwtxpow, /* SIOCSIWTXPOW */ | |
| (iw_handler) prism2_ioctl_giwtxpow, /* SIOCGIWTXPOW */ | |
| (iw_handler) prism2_ioctl_siwretry, /* SIOCSIWRETRY */ | |
| (iw_handler) prism2_ioctl_giwretry, /* SIOCGIWRETRY */ | |
| (iw_handler) prism2_ioctl_siwencode, /* SIOCSIWENCODE */ | |
| (iw_handler) prism2_ioctl_giwencode, /* SIOCGIWENCODE */ | |
| (iw_handler) prism2_ioctl_siwpower, /* SIOCSIWPOWER */ | |
| (iw_handler) prism2_ioctl_giwpower, /* SIOCGIWPOWER */ | |
| (iw_handler) NULL, /* -- hole -- */ | |
| (iw_handler) NULL, /* -- hole -- */ | |
| (iw_handler) prism2_ioctl_siwgenie, /* SIOCSIWGENIE */ | |
| (iw_handler) prism2_ioctl_giwgenie, /* SIOCGIWGENIE */ | |
| (iw_handler) prism2_ioctl_siwauth, /* SIOCSIWAUTH */ | |
| (iw_handler) prism2_ioctl_giwauth, /* SIOCGIWAUTH */ | |
| (iw_handler) prism2_ioctl_siwencodeext, /* SIOCSIWENCODEEXT */ | |
| (iw_handler) prism2_ioctl_giwencodeext, /* SIOCGIWENCODEEXT */ | |
| (iw_handler) NULL, /* SIOCSIWPMKSA */ | |
| (iw_handler) NULL, /* -- hole -- */ | |
| }; | |
| static const iw_handler prism2_private_handler[] = | |
| { /* SIOCIWFIRSTPRIV + */ | |
| (iw_handler) prism2_ioctl_priv_prism2_param, /* 0 */ | |
| (iw_handler) prism2_ioctl_priv_get_prism2_param, /* 1 */ | |
| (iw_handler) prism2_ioctl_priv_writemif, /* 2 */ | |
| (iw_handler) prism2_ioctl_priv_readmif, /* 3 */ | |
| }; | |
| const struct iw_handler_def hostap_iw_handler_def = | |
| { | |
| .num_standard = ARRAY_SIZE(prism2_handler), | |
| .num_private = ARRAY_SIZE(prism2_private_handler), | |
| .num_private_args = ARRAY_SIZE(prism2_priv), | |
| .standard = (iw_handler *) prism2_handler, | |
| .private = (iw_handler *) prism2_private_handler, | |
| .private_args = (struct iw_priv_args *) prism2_priv, | |
| .get_wireless_stats = hostap_get_wireless_stats, | |
| }; | |
| int hostap_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) | |
| { | |
| struct iwreq *wrq = (struct iwreq *) ifr; | |
| struct hostap_interface *iface; | |
| local_info_t *local; | |
| int ret = 0; | |
| iface = netdev_priv(dev); | |
| local = iface->local; | |
| switch (cmd) { | |
| /* Private ioctls (iwpriv) that have not yet been converted | |
| * into new wireless extensions API */ | |
| case PRISM2_IOCTL_INQUIRE: | |
| if (!capable(CAP_NET_ADMIN)) ret = -EPERM; | |
| else ret = prism2_ioctl_priv_inquire(dev, (int *) wrq->u.name); | |
| break; | |
| case PRISM2_IOCTL_MONITOR: | |
| if (!capable(CAP_NET_ADMIN)) ret = -EPERM; | |
| else ret = prism2_ioctl_priv_monitor(dev, (int *) wrq->u.name); | |
| break; | |
| case PRISM2_IOCTL_RESET: | |
| if (!capable(CAP_NET_ADMIN)) ret = -EPERM; | |
| else ret = prism2_ioctl_priv_reset(dev, (int *) wrq->u.name); | |
| break; | |
| case PRISM2_IOCTL_WDS_ADD: | |
| if (!capable(CAP_NET_ADMIN)) ret = -EPERM; | |
| else ret = prism2_wds_add(local, wrq->u.ap_addr.sa_data, 1); | |
| break; | |
| case PRISM2_IOCTL_WDS_DEL: | |
| if (!capable(CAP_NET_ADMIN)) ret = -EPERM; | |
| else ret = prism2_wds_del(local, wrq->u.ap_addr.sa_data, 1, 0); | |
| break; | |
| case PRISM2_IOCTL_SET_RID_WORD: | |
| if (!capable(CAP_NET_ADMIN)) ret = -EPERM; | |
| else ret = prism2_ioctl_priv_set_rid_word(dev, | |
| (int *) wrq->u.name); | |
| break; | |
| #ifndef PRISM2_NO_KERNEL_IEEE80211_MGMT | |
| case PRISM2_IOCTL_MACCMD: | |
| if (!capable(CAP_NET_ADMIN)) ret = -EPERM; | |
| else ret = ap_mac_cmd_ioctl(local, (int *) wrq->u.name); | |
| break; | |
| case PRISM2_IOCTL_ADDMAC: | |
| if (!capable(CAP_NET_ADMIN)) ret = -EPERM; | |
| else ret = ap_control_add_mac(&local->ap->mac_restrictions, | |
| wrq->u.ap_addr.sa_data); | |
| break; | |
| case PRISM2_IOCTL_DELMAC: | |
| if (!capable(CAP_NET_ADMIN)) ret = -EPERM; | |
| else ret = ap_control_del_mac(&local->ap->mac_restrictions, | |
| wrq->u.ap_addr.sa_data); | |
| break; | |
| case PRISM2_IOCTL_KICKMAC: | |
| if (!capable(CAP_NET_ADMIN)) ret = -EPERM; | |
| else ret = ap_control_kick_mac(local->ap, local->dev, | |
| wrq->u.ap_addr.sa_data); | |
| break; | |
| #endif /* PRISM2_NO_KERNEL_IEEE80211_MGMT */ | |
| /* Private ioctls that are not used with iwpriv; | |
| * in SIOCDEVPRIVATE range */ | |
| #ifdef PRISM2_DOWNLOAD_SUPPORT | |
| case PRISM2_IOCTL_DOWNLOAD: | |
| if (!capable(CAP_NET_ADMIN)) ret = -EPERM; | |
| else ret = prism2_ioctl_priv_download(local, &wrq->u.data); | |
| break; | |
| #endif /* PRISM2_DOWNLOAD_SUPPORT */ | |
| case PRISM2_IOCTL_HOSTAPD: | |
| if (!capable(CAP_NET_ADMIN)) ret = -EPERM; | |
| else ret = prism2_ioctl_priv_hostapd(local, &wrq->u.data); | |
| break; | |
| default: | |
| ret = -EOPNOTSUPP; | |
| break; | |
| } | |
| return ret; | |
| } |