| /* cfg80211 support | |
| * | |
| * See copyright notice in main.c | |
| */ | |
| #include <linux/ieee80211.h> | |
| #include <net/cfg80211.h> | |
| #include "hw.h" | |
| #include "main.h" | |
| #include "orinoco.h" | |
| #include "cfg.h" | |
| /* Supported bitrates. Must agree with hw.c */ | |
| static struct ieee80211_rate orinoco_rates[] = { | |
| { .bitrate = 10 }, | |
| { .bitrate = 20 }, | |
| { .bitrate = 55 }, | |
| { .bitrate = 110 }, | |
| }; | |
| static const void * const orinoco_wiphy_privid = &orinoco_wiphy_privid; | |
| /* Called after orinoco_private is allocated. */ | |
| void orinoco_wiphy_init(struct wiphy *wiphy) | |
| { | |
| struct orinoco_private *priv = wiphy_priv(wiphy); | |
| wiphy->privid = orinoco_wiphy_privid; | |
| set_wiphy_dev(wiphy, priv->dev); | |
| } | |
| /* Called after firmware is initialised */ | |
| int orinoco_wiphy_register(struct wiphy *wiphy) | |
| { | |
| struct orinoco_private *priv = wiphy_priv(wiphy); | |
| int i, channels = 0; | |
| if (priv->firmware_type == FIRMWARE_TYPE_AGERE) | |
| wiphy->max_scan_ssids = 1; | |
| else | |
| wiphy->max_scan_ssids = 0; | |
| wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION); | |
| /* TODO: should we set if we only have demo ad-hoc? | |
| * (priv->has_port3) | |
| */ | |
| if (priv->has_ibss) | |
| wiphy->interface_modes |= BIT(NL80211_IFTYPE_ADHOC); | |
| if (!priv->broken_monitor || force_monitor) | |
| wiphy->interface_modes |= BIT(NL80211_IFTYPE_MONITOR); | |
| priv->band.bitrates = orinoco_rates; | |
| priv->band.n_bitrates = ARRAY_SIZE(orinoco_rates); | |
| /* Only support channels allowed by the card EEPROM */ | |
| for (i = 0; i < NUM_CHANNELS; i++) { | |
| if (priv->channel_mask & (1 << i)) { | |
| priv->channels[i].center_freq = | |
| ieee80211_channel_to_frequency(i + 1, | |
| IEEE80211_BAND_2GHZ); | |
| channels++; | |
| } | |
| } | |
| priv->band.channels = priv->channels; | |
| priv->band.n_channels = channels; | |
| wiphy->bands[IEEE80211_BAND_2GHZ] = &priv->band; | |
| wiphy->signal_type = CFG80211_SIGNAL_TYPE_MBM; | |
| i = 0; | |
| if (priv->has_wep) { | |
| priv->cipher_suites[i] = WLAN_CIPHER_SUITE_WEP40; | |
| i++; | |
| if (priv->has_big_wep) { | |
| priv->cipher_suites[i] = WLAN_CIPHER_SUITE_WEP104; | |
| i++; | |
| } | |
| } | |
| if (priv->has_wpa) { | |
| priv->cipher_suites[i] = WLAN_CIPHER_SUITE_TKIP; | |
| i++; | |
| } | |
| wiphy->cipher_suites = priv->cipher_suites; | |
| wiphy->n_cipher_suites = i; | |
| wiphy->rts_threshold = priv->rts_thresh; | |
| if (!priv->has_mwo) | |
| wiphy->frag_threshold = priv->frag_thresh + 1; | |
| wiphy->retry_short = priv->short_retry_limit; | |
| wiphy->retry_long = priv->long_retry_limit; | |
| return wiphy_register(wiphy); | |
| } | |
| static int orinoco_change_vif(struct wiphy *wiphy, struct net_device *dev, | |
| enum nl80211_iftype type, u32 *flags, | |
| struct vif_params *params) | |
| { | |
| struct orinoco_private *priv = wiphy_priv(wiphy); | |
| int err = 0; | |
| unsigned long lock; | |
| if (orinoco_lock(priv, &lock) != 0) | |
| return -EBUSY; | |
| switch (type) { | |
| case NL80211_IFTYPE_ADHOC: | |
| if (!priv->has_ibss && !priv->has_port3) | |
| err = -EINVAL; | |
| break; | |
| case NL80211_IFTYPE_STATION: | |
| break; | |
| case NL80211_IFTYPE_MONITOR: | |
| if (priv->broken_monitor && !force_monitor) { | |
| wiphy_warn(wiphy, | |
| "Monitor mode support is buggy in this firmware, not enabling\n"); | |
| err = -EINVAL; | |
| } | |
| break; | |
| default: | |
| err = -EINVAL; | |
| } | |
| if (!err) { | |
| priv->iw_mode = type; | |
| set_port_type(priv); | |
| err = orinoco_commit(priv); | |
| } | |
| orinoco_unlock(priv, &lock); | |
| return err; | |
| } | |
| static int orinoco_scan(struct wiphy *wiphy, | |
| struct cfg80211_scan_request *request) | |
| { | |
| struct orinoco_private *priv = wiphy_priv(wiphy); | |
| int err; | |
| if (!request) | |
| return -EINVAL; | |
| if (priv->scan_request && priv->scan_request != request) | |
| return -EBUSY; | |
| priv->scan_request = request; | |
| err = orinoco_hw_trigger_scan(priv, request->ssids); | |
| /* On error the we aren't processing the request */ | |
| if (err) | |
| priv->scan_request = NULL; | |
| return err; | |
| } | |
| static int orinoco_set_monitor_channel(struct wiphy *wiphy, | |
| struct cfg80211_chan_def *chandef) | |
| { | |
| struct orinoco_private *priv = wiphy_priv(wiphy); | |
| int err = 0; | |
| unsigned long flags; | |
| int channel; | |
| if (!chandef->chan) | |
| return -EINVAL; | |
| if (cfg80211_get_chandef_type(chandef) != NL80211_CHAN_NO_HT) | |
| return -EINVAL; | |
| if (chandef->chan->band != IEEE80211_BAND_2GHZ) | |
| return -EINVAL; | |
| channel = ieee80211_frequency_to_channel(chandef->chan->center_freq); | |
| if ((channel < 1) || (channel > NUM_CHANNELS) || | |
| !(priv->channel_mask & (1 << (channel - 1)))) | |
| return -EINVAL; | |
| if (orinoco_lock(priv, &flags) != 0) | |
| return -EBUSY; | |
| priv->channel = channel; | |
| if (priv->iw_mode == NL80211_IFTYPE_MONITOR) { | |
| /* Fast channel change - no commit if successful */ | |
| struct hermes *hw = &priv->hw; | |
| err = hw->ops->cmd_wait(hw, HERMES_CMD_TEST | | |
| HERMES_TEST_SET_CHANNEL, | |
| channel, NULL); | |
| } | |
| orinoco_unlock(priv, &flags); | |
| return err; | |
| } | |
| static int orinoco_set_wiphy_params(struct wiphy *wiphy, u32 changed) | |
| { | |
| struct orinoco_private *priv = wiphy_priv(wiphy); | |
| int frag_value = -1; | |
| int rts_value = -1; | |
| int err = 0; | |
| if (changed & WIPHY_PARAM_RETRY_SHORT) { | |
| /* Setting short retry not supported */ | |
| err = -EINVAL; | |
| } | |
| if (changed & WIPHY_PARAM_RETRY_LONG) { | |
| /* Setting long retry not supported */ | |
| err = -EINVAL; | |
| } | |
| if (changed & WIPHY_PARAM_FRAG_THRESHOLD) { | |
| /* Set fragmentation */ | |
| if (priv->has_mwo) { | |
| if (wiphy->frag_threshold == -1) | |
| frag_value = 0; | |
| else { | |
| printk(KERN_WARNING "%s: Fixed fragmentation " | |
| "is not supported on this firmware. " | |
| "Using MWO robust instead.\n", | |
| priv->ndev->name); | |
| frag_value = 1; | |
| } | |
| } else { | |
| if (wiphy->frag_threshold == -1) | |
| frag_value = 2346; | |
| else if ((wiphy->frag_threshold < 257) || | |
| (wiphy->frag_threshold > 2347)) | |
| err = -EINVAL; | |
| else | |
| /* cfg80211 value is 257-2347 (odd only) | |
| * orinoco rid has range 256-2346 (even only) */ | |
| frag_value = wiphy->frag_threshold & ~0x1; | |
| } | |
| } | |
| if (changed & WIPHY_PARAM_RTS_THRESHOLD) { | |
| /* Set RTS. | |
| * | |
| * Prism documentation suggests default of 2432, | |
| * and a range of 0-3000. | |
| * | |
| * Current implementation uses 2347 as the default and | |
| * the upper limit. | |
| */ | |
| if (wiphy->rts_threshold == -1) | |
| rts_value = 2347; | |
| else if (wiphy->rts_threshold > 2347) | |
| err = -EINVAL; | |
| else | |
| rts_value = wiphy->rts_threshold; | |
| } | |
| if (!err) { | |
| unsigned long flags; | |
| if (orinoco_lock(priv, &flags) != 0) | |
| return -EBUSY; | |
| if (frag_value >= 0) { | |
| if (priv->has_mwo) | |
| priv->mwo_robust = frag_value; | |
| else | |
| priv->frag_thresh = frag_value; | |
| } | |
| if (rts_value >= 0) | |
| priv->rts_thresh = rts_value; | |
| err = orinoco_commit(priv); | |
| orinoco_unlock(priv, &flags); | |
| } | |
| return err; | |
| } | |
| const struct cfg80211_ops orinoco_cfg_ops = { | |
| .change_virtual_intf = orinoco_change_vif, | |
| .set_monitor_channel = orinoco_set_monitor_channel, | |
| .scan = orinoco_scan, | |
| .set_wiphy_params = orinoco_set_wiphy_params, | |
| }; |