| /* Encapsulate basic setting changes and retrieval on Hermes hardware | |
| * | |
| * See copyright notice in main.c | |
| */ | |
| #include <linux/kernel.h> | |
| #include <linux/device.h> | |
| #include <linux/if_arp.h> | |
| #include <linux/ieee80211.h> | |
| #include <linux/wireless.h> | |
| #include <net/cfg80211.h> | |
| #include "hermes.h" | |
| #include "hermes_rid.h" | |
| #include "orinoco.h" | |
| #include "hw.h" | |
| #define SYMBOL_MAX_VER_LEN (14) | |
| /* Symbol firmware has a bug allocating buffers larger than this */ | |
| #define TX_NICBUF_SIZE_BUG 1585 | |
| /********************************************************************/ | |
| /* Data tables */ | |
| /********************************************************************/ | |
| /* This tables gives the actual meanings of the bitrate IDs returned | |
| * by the firmware. */ | |
| static const struct { | |
| int bitrate; /* in 100s of kilobits */ | |
| int automatic; | |
| u16 agere_txratectrl; | |
| u16 intersil_txratectrl; | |
| } bitrate_table[] = { | |
| {110, 1, 3, 15}, /* Entry 0 is the default */ | |
| {10, 0, 1, 1}, | |
| {10, 1, 1, 1}, | |
| {20, 0, 2, 2}, | |
| {20, 1, 6, 3}, | |
| {55, 0, 4, 4}, | |
| {55, 1, 7, 7}, | |
| {110, 0, 5, 8}, | |
| }; | |
| #define BITRATE_TABLE_SIZE ARRAY_SIZE(bitrate_table) | |
| /* Firmware version encoding */ | |
| struct comp_id { | |
| u16 id, variant, major, minor; | |
| } __packed; | |
| static inline enum fwtype determine_firmware_type(struct comp_id *nic_id) | |
| { | |
| if (nic_id->id < 0x8000) | |
| return FIRMWARE_TYPE_AGERE; | |
| else if (nic_id->id == 0x8000 && nic_id->major == 0) | |
| return FIRMWARE_TYPE_SYMBOL; | |
| else | |
| return FIRMWARE_TYPE_INTERSIL; | |
| } | |
| /* Set priv->firmware type, determine firmware properties | |
| * This function can be called before we have registerred with netdev, | |
| * so all errors go out with dev_* rather than printk | |
| * | |
| * If non-NULL stores a firmware description in fw_name. | |
| * If non-NULL stores a HW version in hw_ver | |
| * | |
| * These are output via generic cfg80211 ethtool support. | |
| */ | |
| int determine_fw_capabilities(struct orinoco_private *priv, | |
| char *fw_name, size_t fw_name_len, | |
| u32 *hw_ver) | |
| { | |
| struct device *dev = priv->dev; | |
| struct hermes *hw = &priv->hw; | |
| int err; | |
| struct comp_id nic_id, sta_id; | |
| unsigned int firmver; | |
| char tmp[SYMBOL_MAX_VER_LEN + 1] __attribute__((aligned(2))); | |
| /* Get the hardware version */ | |
| err = HERMES_READ_RECORD(hw, USER_BAP, HERMES_RID_NICID, &nic_id); | |
| if (err) { | |
| dev_err(dev, "Cannot read hardware identity: error %d\n", | |
| err); | |
| return err; | |
| } | |
| le16_to_cpus(&nic_id.id); | |
| le16_to_cpus(&nic_id.variant); | |
| le16_to_cpus(&nic_id.major); | |
| le16_to_cpus(&nic_id.minor); | |
| dev_info(dev, "Hardware identity %04x:%04x:%04x:%04x\n", | |
| nic_id.id, nic_id.variant, nic_id.major, nic_id.minor); | |
| if (hw_ver) | |
| *hw_ver = (((nic_id.id & 0xff) << 24) | | |
| ((nic_id.variant & 0xff) << 16) | | |
| ((nic_id.major & 0xff) << 8) | | |
| (nic_id.minor & 0xff)); | |
| priv->firmware_type = determine_firmware_type(&nic_id); | |
| /* Get the firmware version */ | |
| err = HERMES_READ_RECORD(hw, USER_BAP, HERMES_RID_STAID, &sta_id); | |
| if (err) { | |
| dev_err(dev, "Cannot read station identity: error %d\n", | |
| err); | |
| return err; | |
| } | |
| le16_to_cpus(&sta_id.id); | |
| le16_to_cpus(&sta_id.variant); | |
| le16_to_cpus(&sta_id.major); | |
| le16_to_cpus(&sta_id.minor); | |
| dev_info(dev, "Station identity %04x:%04x:%04x:%04x\n", | |
| sta_id.id, sta_id.variant, sta_id.major, sta_id.minor); | |
| switch (sta_id.id) { | |
| case 0x15: | |
| dev_err(dev, "Primary firmware is active\n"); | |
| return -ENODEV; | |
| case 0x14b: | |
| dev_err(dev, "Tertiary firmware is active\n"); | |
| return -ENODEV; | |
| case 0x1f: /* Intersil, Agere, Symbol Spectrum24 */ | |
| case 0x21: /* Symbol Spectrum24 Trilogy */ | |
| break; | |
| default: | |
| dev_notice(dev, "Unknown station ID, please report\n"); | |
| break; | |
| } | |
| /* Default capabilities */ | |
| priv->has_sensitivity = 1; | |
| priv->has_mwo = 0; | |
| priv->has_preamble = 0; | |
| priv->has_port3 = 1; | |
| priv->has_ibss = 1; | |
| priv->has_wep = 0; | |
| priv->has_big_wep = 0; | |
| priv->has_alt_txcntl = 0; | |
| priv->has_ext_scan = 0; | |
| priv->has_wpa = 0; | |
| priv->do_fw_download = 0; | |
| /* Determine capabilities from the firmware version */ | |
| switch (priv->firmware_type) { | |
| case FIRMWARE_TYPE_AGERE: | |
| /* Lucent Wavelan IEEE, Lucent Orinoco, Cabletron RoamAbout, | |
| ELSA, Melco, HP, IBM, Dell 1150, Compaq 110/210 */ | |
| if (fw_name) | |
| snprintf(fw_name, fw_name_len, "Lucent/Agere %d.%02d", | |
| sta_id.major, sta_id.minor); | |
| firmver = ((unsigned long)sta_id.major << 16) | sta_id.minor; | |
| priv->has_ibss = (firmver >= 0x60006); | |
| priv->has_wep = (firmver >= 0x40020); | |
| priv->has_big_wep = 1; /* FIXME: this is wrong - how do we tell | |
| Gold cards from the others? */ | |
| priv->has_mwo = (firmver >= 0x60000); | |
| priv->has_pm = (firmver >= 0x40020); /* Don't work in 7.52 ? */ | |
| priv->ibss_port = 1; | |
| priv->has_hostscan = (firmver >= 0x8000a); | |
| priv->do_fw_download = 1; | |
| priv->broken_monitor = (firmver >= 0x80000); | |
| priv->has_alt_txcntl = (firmver >= 0x90000); /* All 9.x ? */ | |
| priv->has_ext_scan = (firmver >= 0x90000); /* All 9.x ? */ | |
| priv->has_wpa = (firmver >= 0x9002a); | |
| /* Tested with Agere firmware : | |
| * 1.16 ; 4.08 ; 4.52 ; 6.04 ; 6.16 ; 7.28 => Jean II | |
| * Tested CableTron firmware : 4.32 => Anton */ | |
| break; | |
| case FIRMWARE_TYPE_SYMBOL: | |
| /* Symbol , 3Com AirConnect, Intel, Ericsson WLAN */ | |
| /* Intel MAC : 00:02:B3:* */ | |
| /* 3Com MAC : 00:50:DA:* */ | |
| memset(tmp, 0, sizeof(tmp)); | |
| /* Get the Symbol firmware version */ | |
| err = hw->ops->read_ltv(hw, USER_BAP, | |
| HERMES_RID_SECONDARYVERSION_SYMBOL, | |
| SYMBOL_MAX_VER_LEN, NULL, &tmp); | |
| if (err) { | |
| dev_warn(dev, "Error %d reading Symbol firmware info. " | |
| "Wildly guessing capabilities...\n", err); | |
| firmver = 0; | |
| tmp[0] = '\0'; | |
| } else { | |
| /* The firmware revision is a string, the format is | |
| * something like : "V2.20-01". | |
| * Quick and dirty parsing... - Jean II | |
| */ | |
| firmver = ((tmp[1] - '0') << 16) | |
| | ((tmp[3] - '0') << 12) | |
| | ((tmp[4] - '0') << 8) | |
| | ((tmp[6] - '0') << 4) | |
| | (tmp[7] - '0'); | |
| tmp[SYMBOL_MAX_VER_LEN] = '\0'; | |
| } | |
| if (fw_name) | |
| snprintf(fw_name, fw_name_len, "Symbol %s", tmp); | |
| priv->has_ibss = (firmver >= 0x20000); | |
| priv->has_wep = (firmver >= 0x15012); | |
| priv->has_big_wep = (firmver >= 0x20000); | |
| priv->has_pm = (firmver >= 0x20000 && firmver < 0x22000) || | |
| (firmver >= 0x29000 && firmver < 0x30000) || | |
| firmver >= 0x31000; | |
| priv->has_preamble = (firmver >= 0x20000); | |
| priv->ibss_port = 4; | |
| /* Symbol firmware is found on various cards, but | |
| * there has been no attempt to check firmware | |
| * download on non-spectrum_cs based cards. | |
| * | |
| * Given that the Agere firmware download works | |
| * differently, we should avoid doing a firmware | |
| * download with the Symbol algorithm on non-spectrum | |
| * cards. | |
| * | |
| * For now we can identify a spectrum_cs based card | |
| * because it has a firmware reset function. | |
| */ | |
| priv->do_fw_download = (priv->stop_fw != NULL); | |
| priv->broken_disableport = (firmver == 0x25013) || | |
| (firmver >= 0x30000 && firmver <= 0x31000); | |
| priv->has_hostscan = (firmver >= 0x31001) || | |
| (firmver >= 0x29057 && firmver < 0x30000); | |
| /* Tested with Intel firmware : 0x20015 => Jean II */ | |
| /* Tested with 3Com firmware : 0x15012 & 0x22001 => Jean II */ | |
| break; | |
| case FIRMWARE_TYPE_INTERSIL: | |
| /* D-Link, Linksys, Adtron, ZoomAir, and many others... | |
| * Samsung, Compaq 100/200 and Proxim are slightly | |
| * different and less well tested */ | |
| /* D-Link MAC : 00:40:05:* */ | |
| /* Addtron MAC : 00:90:D1:* */ | |
| if (fw_name) | |
| snprintf(fw_name, fw_name_len, "Intersil %d.%d.%d", | |
| sta_id.major, sta_id.minor, sta_id.variant); | |
| firmver = ((unsigned long)sta_id.major << 16) | | |
| ((unsigned long)sta_id.minor << 8) | sta_id.variant; | |
| priv->has_ibss = (firmver >= 0x000700); /* FIXME */ | |
| priv->has_big_wep = priv->has_wep = (firmver >= 0x000800); | |
| priv->has_pm = (firmver >= 0x000700); | |
| priv->has_hostscan = (firmver >= 0x010301); | |
| if (firmver >= 0x000800) | |
| priv->ibss_port = 0; | |
| else { | |
| dev_notice(dev, "Intersil firmware earlier than v0.8.x" | |
| " - several features not supported\n"); | |
| priv->ibss_port = 1; | |
| } | |
| break; | |
| } | |
| if (fw_name) | |
| dev_info(dev, "Firmware determined as %s\n", fw_name); | |
| #ifndef CONFIG_HERMES_PRISM | |
| if (priv->firmware_type == FIRMWARE_TYPE_INTERSIL) { | |
| dev_err(dev, "Support for Prism chipset is not enabled\n"); | |
| return -ENODEV; | |
| } | |
| #endif | |
| return 0; | |
| } | |
| /* Read settings from EEPROM into our private structure. | |
| * MAC address gets dropped into callers buffer | |
| * Can be called before netdev registration. | |
| */ | |
| int orinoco_hw_read_card_settings(struct orinoco_private *priv, u8 *dev_addr) | |
| { | |
| struct device *dev = priv->dev; | |
| struct hermes_idstring nickbuf; | |
| struct hermes *hw = &priv->hw; | |
| int len; | |
| int err; | |
| u16 reclen; | |
| /* Get the MAC address */ | |
| err = hw->ops->read_ltv(hw, USER_BAP, HERMES_RID_CNFOWNMACADDR, | |
| ETH_ALEN, NULL, dev_addr); | |
| if (err) { | |
| dev_warn(dev, "Failed to read MAC address!\n"); | |
| goto out; | |
| } | |
| dev_dbg(dev, "MAC address %pM\n", dev_addr); | |
| /* Get the station name */ | |
| err = hw->ops->read_ltv(hw, USER_BAP, HERMES_RID_CNFOWNNAME, | |
| sizeof(nickbuf), &reclen, &nickbuf); | |
| if (err) { | |
| dev_err(dev, "failed to read station name\n"); | |
| goto out; | |
| } | |
| if (nickbuf.len) | |
| len = min(IW_ESSID_MAX_SIZE, (int)le16_to_cpu(nickbuf.len)); | |
| else | |
| len = min(IW_ESSID_MAX_SIZE, 2 * reclen); | |
| memcpy(priv->nick, &nickbuf.val, len); | |
| priv->nick[len] = '\0'; | |
| dev_dbg(dev, "Station name \"%s\"\n", priv->nick); | |
| /* Get allowed channels */ | |
| err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_CHANNELLIST, | |
| &priv->channel_mask); | |
| if (err) { | |
| dev_err(dev, "Failed to read channel list!\n"); | |
| goto out; | |
| } | |
| /* Get initial AP density */ | |
| err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_CNFSYSTEMSCALE, | |
| &priv->ap_density); | |
| if (err || priv->ap_density < 1 || priv->ap_density > 3) | |
| priv->has_sensitivity = 0; | |
| /* Get initial RTS threshold */ | |
| err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_CNFRTSTHRESHOLD, | |
| &priv->rts_thresh); | |
| if (err) { | |
| dev_err(dev, "Failed to read RTS threshold!\n"); | |
| goto out; | |
| } | |
| /* Get initial fragmentation settings */ | |
| if (priv->has_mwo) | |
| err = hermes_read_wordrec(hw, USER_BAP, | |
| HERMES_RID_CNFMWOROBUST_AGERE, | |
| &priv->mwo_robust); | |
| else | |
| err = hermes_read_wordrec(hw, USER_BAP, | |
| HERMES_RID_CNFFRAGMENTATIONTHRESHOLD, | |
| &priv->frag_thresh); | |
| if (err) { | |
| dev_err(dev, "Failed to read fragmentation settings!\n"); | |
| goto out; | |
| } | |
| /* Power management setup */ | |
| if (priv->has_pm) { | |
| priv->pm_on = 0; | |
| priv->pm_mcast = 1; | |
| err = hermes_read_wordrec(hw, USER_BAP, | |
| HERMES_RID_CNFMAXSLEEPDURATION, | |
| &priv->pm_period); | |
| if (err) { | |
| dev_err(dev, "Failed to read power management " | |
| "period!\n"); | |
| goto out; | |
| } | |
| err = hermes_read_wordrec(hw, USER_BAP, | |
| HERMES_RID_CNFPMHOLDOVERDURATION, | |
| &priv->pm_timeout); | |
| if (err) { | |
| dev_err(dev, "Failed to read power management " | |
| "timeout!\n"); | |
| goto out; | |
| } | |
| } | |
| /* Preamble setup */ | |
| if (priv->has_preamble) { | |
| err = hermes_read_wordrec(hw, USER_BAP, | |
| HERMES_RID_CNFPREAMBLE_SYMBOL, | |
| &priv->preamble); | |
| if (err) { | |
| dev_err(dev, "Failed to read preamble setup\n"); | |
| goto out; | |
| } | |
| } | |
| /* Retry settings */ | |
| err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_SHORTRETRYLIMIT, | |
| &priv->short_retry_limit); | |
| if (err) { | |
| dev_err(dev, "Failed to read short retry limit\n"); | |
| goto out; | |
| } | |
| err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_LONGRETRYLIMIT, | |
| &priv->long_retry_limit); | |
| if (err) { | |
| dev_err(dev, "Failed to read long retry limit\n"); | |
| goto out; | |
| } | |
| err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_MAXTRANSMITLIFETIME, | |
| &priv->retry_lifetime); | |
| if (err) { | |
| dev_err(dev, "Failed to read max retry lifetime\n"); | |
| goto out; | |
| } | |
| out: | |
| return err; | |
| } | |
| /* Can be called before netdev registration */ | |
| int orinoco_hw_allocate_fid(struct orinoco_private *priv) | |
| { | |
| struct device *dev = priv->dev; | |
| struct hermes *hw = &priv->hw; | |
| int err; | |
| err = hw->ops->allocate(hw, priv->nicbuf_size, &priv->txfid); | |
| if (err == -EIO && priv->nicbuf_size > TX_NICBUF_SIZE_BUG) { | |
| /* Try workaround for old Symbol firmware bug */ | |
| priv->nicbuf_size = TX_NICBUF_SIZE_BUG; | |
| err = hw->ops->allocate(hw, priv->nicbuf_size, &priv->txfid); | |
| dev_warn(dev, "Firmware ALLOC bug detected " | |
| "(old Symbol firmware?). Work around %s\n", | |
| err ? "failed!" : "ok."); | |
| } | |
| return err; | |
| } | |
| int orinoco_get_bitratemode(int bitrate, int automatic) | |
| { | |
| int ratemode = -1; | |
| int i; | |
| if ((bitrate != 10) && (bitrate != 20) && | |
| (bitrate != 55) && (bitrate != 110)) | |
| return ratemode; | |
| for (i = 0; i < BITRATE_TABLE_SIZE; i++) { | |
| if ((bitrate_table[i].bitrate == bitrate) && | |
| (bitrate_table[i].automatic == automatic)) { | |
| ratemode = i; | |
| break; | |
| } | |
| } | |
| return ratemode; | |
| } | |
| void orinoco_get_ratemode_cfg(int ratemode, int *bitrate, int *automatic) | |
| { | |
| BUG_ON((ratemode < 0) || (ratemode >= BITRATE_TABLE_SIZE)); | |
| *bitrate = bitrate_table[ratemode].bitrate * 100000; | |
| *automatic = bitrate_table[ratemode].automatic; | |
| } | |
| int orinoco_hw_program_rids(struct orinoco_private *priv) | |
| { | |
| struct net_device *dev = priv->ndev; | |
| struct wireless_dev *wdev = netdev_priv(dev); | |
| struct hermes *hw = &priv->hw; | |
| int err; | |
| struct hermes_idstring idbuf; | |
| /* Set the MAC address */ | |
| err = hw->ops->write_ltv(hw, USER_BAP, HERMES_RID_CNFOWNMACADDR, | |
| HERMES_BYTES_TO_RECLEN(ETH_ALEN), | |
| dev->dev_addr); | |
| if (err) { | |
| printk(KERN_ERR "%s: Error %d setting MAC address\n", | |
| dev->name, err); | |
| return err; | |
| } | |
| /* Set up the link mode */ | |
| err = hermes_write_wordrec(hw, USER_BAP, HERMES_RID_CNFPORTTYPE, | |
| priv->port_type); | |
| if (err) { | |
| printk(KERN_ERR "%s: Error %d setting port type\n", | |
| dev->name, err); | |
| return err; | |
| } | |
| /* Set the channel/frequency */ | |
| if (priv->channel != 0 && priv->iw_mode != NL80211_IFTYPE_STATION) { | |
| err = hermes_write_wordrec(hw, USER_BAP, | |
| HERMES_RID_CNFOWNCHANNEL, | |
| priv->channel); | |
| if (err) { | |
| printk(KERN_ERR "%s: Error %d setting channel %d\n", | |
| dev->name, err, priv->channel); | |
| return err; | |
| } | |
| } | |
| if (priv->has_ibss) { | |
| u16 createibss; | |
| if ((strlen(priv->desired_essid) == 0) && (priv->createibss)) { | |
| printk(KERN_WARNING "%s: This firmware requires an " | |
| "ESSID in IBSS-Ad-Hoc mode.\n", dev->name); | |
| /* With wvlan_cs, in this case, we would crash. | |
| * hopefully, this driver will behave better... | |
| * Jean II */ | |
| createibss = 0; | |
| } else { | |
| createibss = priv->createibss; | |
| } | |
| err = hermes_write_wordrec(hw, USER_BAP, | |
| HERMES_RID_CNFCREATEIBSS, | |
| createibss); | |
| if (err) { | |
| printk(KERN_ERR "%s: Error %d setting CREATEIBSS\n", | |
| dev->name, err); | |
| return err; | |
| } | |
| } | |
| /* Set the desired BSSID */ | |
| err = __orinoco_hw_set_wap(priv); | |
| if (err) { | |
| printk(KERN_ERR "%s: Error %d setting AP address\n", | |
| dev->name, err); | |
| return err; | |
| } | |
| /* Set the desired ESSID */ | |
| idbuf.len = cpu_to_le16(strlen(priv->desired_essid)); | |
| memcpy(&idbuf.val, priv->desired_essid, sizeof(idbuf.val)); | |
| /* WinXP wants partner to configure OWNSSID even in IBSS mode. (jimc) */ | |
| err = hw->ops->write_ltv(hw, USER_BAP, HERMES_RID_CNFOWNSSID, | |
| HERMES_BYTES_TO_RECLEN(strlen(priv->desired_essid) + 2), | |
| &idbuf); | |
| if (err) { | |
| printk(KERN_ERR "%s: Error %d setting OWNSSID\n", | |
| dev->name, err); | |
| return err; | |
| } | |
| err = hw->ops->write_ltv(hw, USER_BAP, HERMES_RID_CNFDESIREDSSID, | |
| HERMES_BYTES_TO_RECLEN(strlen(priv->desired_essid) + 2), | |
| &idbuf); | |
| if (err) { | |
| printk(KERN_ERR "%s: Error %d setting DESIREDSSID\n", | |
| dev->name, err); | |
| return err; | |
| } | |
| /* Set the station name */ | |
| idbuf.len = cpu_to_le16(strlen(priv->nick)); | |
| memcpy(&idbuf.val, priv->nick, sizeof(idbuf.val)); | |
| err = hw->ops->write_ltv(hw, USER_BAP, HERMES_RID_CNFOWNNAME, | |
| HERMES_BYTES_TO_RECLEN(strlen(priv->nick) + 2), | |
| &idbuf); | |
| if (err) { | |
| printk(KERN_ERR "%s: Error %d setting nickname\n", | |
| dev->name, err); | |
| return err; | |
| } | |
| /* Set AP density */ | |
| if (priv->has_sensitivity) { | |
| err = hermes_write_wordrec(hw, USER_BAP, | |
| HERMES_RID_CNFSYSTEMSCALE, | |
| priv->ap_density); | |
| if (err) { | |
| printk(KERN_WARNING "%s: Error %d setting SYSTEMSCALE. " | |
| "Disabling sensitivity control\n", | |
| dev->name, err); | |
| priv->has_sensitivity = 0; | |
| } | |
| } | |
| /* Set RTS threshold */ | |
| err = hermes_write_wordrec(hw, USER_BAP, HERMES_RID_CNFRTSTHRESHOLD, | |
| priv->rts_thresh); | |
| if (err) { | |
| printk(KERN_ERR "%s: Error %d setting RTS threshold\n", | |
| dev->name, err); | |
| return err; | |
| } | |
| /* Set fragmentation threshold or MWO robustness */ | |
| if (priv->has_mwo) | |
| err = hermes_write_wordrec(hw, USER_BAP, | |
| HERMES_RID_CNFMWOROBUST_AGERE, | |
| priv->mwo_robust); | |
| else | |
| err = hermes_write_wordrec(hw, USER_BAP, | |
| HERMES_RID_CNFFRAGMENTATIONTHRESHOLD, | |
| priv->frag_thresh); | |
| if (err) { | |
| printk(KERN_ERR "%s: Error %d setting fragmentation\n", | |
| dev->name, err); | |
| return err; | |
| } | |
| /* Set bitrate */ | |
| err = __orinoco_hw_set_bitrate(priv); | |
| if (err) { | |
| printk(KERN_ERR "%s: Error %d setting bitrate\n", | |
| dev->name, err); | |
| return err; | |
| } | |
| /* Set power management */ | |
| if (priv->has_pm) { | |
| err = hermes_write_wordrec(hw, USER_BAP, | |
| HERMES_RID_CNFPMENABLED, | |
| priv->pm_on); | |
| if (err) { | |
| printk(KERN_ERR "%s: Error %d setting up PM\n", | |
| dev->name, err); | |
| return err; | |
| } | |
| err = hermes_write_wordrec(hw, USER_BAP, | |
| HERMES_RID_CNFMULTICASTRECEIVE, | |
| priv->pm_mcast); | |
| if (err) { | |
| printk(KERN_ERR "%s: Error %d setting up PM\n", | |
| dev->name, err); | |
| return err; | |
| } | |
| err = hermes_write_wordrec(hw, USER_BAP, | |
| HERMES_RID_CNFMAXSLEEPDURATION, | |
| priv->pm_period); | |
| if (err) { | |
| printk(KERN_ERR "%s: Error %d setting up PM\n", | |
| dev->name, err); | |
| return err; | |
| } | |
| err = hermes_write_wordrec(hw, USER_BAP, | |
| HERMES_RID_CNFPMHOLDOVERDURATION, | |
| priv->pm_timeout); | |
| if (err) { | |
| printk(KERN_ERR "%s: Error %d setting up PM\n", | |
| dev->name, err); | |
| return err; | |
| } | |
| } | |
| /* Set preamble - only for Symbol so far... */ | |
| if (priv->has_preamble) { | |
| err = hermes_write_wordrec(hw, USER_BAP, | |
| HERMES_RID_CNFPREAMBLE_SYMBOL, | |
| priv->preamble); | |
| if (err) { | |
| printk(KERN_ERR "%s: Error %d setting preamble\n", | |
| dev->name, err); | |
| return err; | |
| } | |
| } | |
| /* Set up encryption */ | |
| if (priv->has_wep || priv->has_wpa) { | |
| err = __orinoco_hw_setup_enc(priv); | |
| if (err) { | |
| printk(KERN_ERR "%s: Error %d activating encryption\n", | |
| dev->name, err); | |
| return err; | |
| } | |
| } | |
| if (priv->iw_mode == NL80211_IFTYPE_MONITOR) { | |
| /* Enable monitor mode */ | |
| dev->type = ARPHRD_IEEE80211; | |
| err = hw->ops->cmd_wait(hw, HERMES_CMD_TEST | | |
| HERMES_TEST_MONITOR, 0, NULL); | |
| } else { | |
| /* Disable monitor mode */ | |
| dev->type = ARPHRD_ETHER; | |
| err = hw->ops->cmd_wait(hw, HERMES_CMD_TEST | | |
| HERMES_TEST_STOP, 0, NULL); | |
| } | |
| if (err) | |
| return err; | |
| /* Reset promiscuity / multicast*/ | |
| priv->promiscuous = 0; | |
| priv->mc_count = 0; | |
| /* Record mode change */ | |
| wdev->iftype = priv->iw_mode; | |
| return 0; | |
| } | |
| /* Get tsc from the firmware */ | |
| int orinoco_hw_get_tkip_iv(struct orinoco_private *priv, int key, u8 *tsc) | |
| { | |
| struct hermes *hw = &priv->hw; | |
| int err = 0; | |
| u8 tsc_arr[4][ORINOCO_SEQ_LEN]; | |
| if ((key < 0) || (key >= 4)) | |
| return -EINVAL; | |
| err = hw->ops->read_ltv(hw, USER_BAP, HERMES_RID_CURRENT_TKIP_IV, | |
| sizeof(tsc_arr), NULL, &tsc_arr); | |
| if (!err) | |
| memcpy(tsc, &tsc_arr[key][0], sizeof(tsc_arr[0])); | |
| return err; | |
| } | |
| int __orinoco_hw_set_bitrate(struct orinoco_private *priv) | |
| { | |
| struct hermes *hw = &priv->hw; | |
| int ratemode = priv->bitratemode; | |
| int err = 0; | |
| if (ratemode >= BITRATE_TABLE_SIZE) { | |
| printk(KERN_ERR "%s: BUG: Invalid bitrate mode %d\n", | |
| priv->ndev->name, ratemode); | |
| return -EINVAL; | |
| } | |
| switch (priv->firmware_type) { | |
| case FIRMWARE_TYPE_AGERE: | |
| err = hermes_write_wordrec(hw, USER_BAP, | |
| HERMES_RID_CNFTXRATECONTROL, | |
| bitrate_table[ratemode].agere_txratectrl); | |
| break; | |
| case FIRMWARE_TYPE_INTERSIL: | |
| case FIRMWARE_TYPE_SYMBOL: | |
| err = hermes_write_wordrec(hw, USER_BAP, | |
| HERMES_RID_CNFTXRATECONTROL, | |
| bitrate_table[ratemode].intersil_txratectrl); | |
| break; | |
| default: | |
| BUG(); | |
| } | |
| return err; | |
| } | |
| int orinoco_hw_get_act_bitrate(struct orinoco_private *priv, int *bitrate) | |
| { | |
| struct hermes *hw = &priv->hw; | |
| int i; | |
| int err = 0; | |
| u16 val; | |
| err = hermes_read_wordrec(hw, USER_BAP, | |
| HERMES_RID_CURRENTTXRATE, &val); | |
| if (err) | |
| return err; | |
| switch (priv->firmware_type) { | |
| case FIRMWARE_TYPE_AGERE: /* Lucent style rate */ | |
| /* Note : in Lucent firmware, the return value of | |
| * HERMES_RID_CURRENTTXRATE is the bitrate in Mb/s, | |
| * and therefore is totally different from the | |
| * encoding of HERMES_RID_CNFTXRATECONTROL. | |
| * Don't forget that 6Mb/s is really 5.5Mb/s */ | |
| if (val == 6) | |
| *bitrate = 5500000; | |
| else | |
| *bitrate = val * 1000000; | |
| break; | |
| case FIRMWARE_TYPE_INTERSIL: /* Intersil style rate */ | |
| case FIRMWARE_TYPE_SYMBOL: /* Symbol style rate */ | |
| for (i = 0; i < BITRATE_TABLE_SIZE; i++) | |
| if (bitrate_table[i].intersil_txratectrl == val) { | |
| *bitrate = bitrate_table[i].bitrate * 100000; | |
| break; | |
| } | |
| if (i >= BITRATE_TABLE_SIZE) { | |
| printk(KERN_INFO "%s: Unable to determine current bitrate (0x%04hx)\n", | |
| priv->ndev->name, val); | |
| err = -EIO; | |
| } | |
| break; | |
| default: | |
| BUG(); | |
| } | |
| return err; | |
| } | |
| /* Set fixed AP address */ | |
| int __orinoco_hw_set_wap(struct orinoco_private *priv) | |
| { | |
| int roaming_flag; | |
| int err = 0; | |
| struct hermes *hw = &priv->hw; | |
| switch (priv->firmware_type) { | |
| case FIRMWARE_TYPE_AGERE: | |
| /* not supported */ | |
| break; | |
| case FIRMWARE_TYPE_INTERSIL: | |
| if (priv->bssid_fixed) | |
| roaming_flag = 2; | |
| else | |
| roaming_flag = 1; | |
| err = hermes_write_wordrec(hw, USER_BAP, | |
| HERMES_RID_CNFROAMINGMODE, | |
| roaming_flag); | |
| break; | |
| case FIRMWARE_TYPE_SYMBOL: | |
| err = HERMES_WRITE_RECORD(hw, USER_BAP, | |
| HERMES_RID_CNFMANDATORYBSSID_SYMBOL, | |
| &priv->desired_bssid); | |
| break; | |
| } | |
| return err; | |
| } | |
| /* Change the WEP keys and/or the current keys. Can be called | |
| * either from __orinoco_hw_setup_enc() or directly from | |
| * orinoco_ioctl_setiwencode(). In the later case the association | |
| * with the AP is not broken (if the firmware can handle it), | |
| * which is needed for 802.1x implementations. */ | |
| int __orinoco_hw_setup_wepkeys(struct orinoco_private *priv) | |
| { | |
| struct hermes *hw = &priv->hw; | |
| int err = 0; | |
| int i; | |
| switch (priv->firmware_type) { | |
| case FIRMWARE_TYPE_AGERE: | |
| { | |
| struct orinoco_key keys[ORINOCO_MAX_KEYS]; | |
| memset(&keys, 0, sizeof(keys)); | |
| for (i = 0; i < ORINOCO_MAX_KEYS; i++) { | |
| int len = min(priv->keys[i].key_len, | |
| ORINOCO_MAX_KEY_SIZE); | |
| memcpy(&keys[i].data, priv->keys[i].key, len); | |
| if (len > SMALL_KEY_SIZE) | |
| keys[i].len = cpu_to_le16(LARGE_KEY_SIZE); | |
| else if (len > 0) | |
| keys[i].len = cpu_to_le16(SMALL_KEY_SIZE); | |
| else | |
| keys[i].len = cpu_to_le16(0); | |
| } | |
| err = HERMES_WRITE_RECORD(hw, USER_BAP, | |
| HERMES_RID_CNFWEPKEYS_AGERE, | |
| &keys); | |
| if (err) | |
| return err; | |
| err = hermes_write_wordrec(hw, USER_BAP, | |
| HERMES_RID_CNFTXKEY_AGERE, | |
| priv->tx_key); | |
| if (err) | |
| return err; | |
| break; | |
| } | |
| case FIRMWARE_TYPE_INTERSIL: | |
| case FIRMWARE_TYPE_SYMBOL: | |
| { | |
| int keylen; | |
| /* Force uniform key length to work around | |
| * firmware bugs */ | |
| keylen = priv->keys[priv->tx_key].key_len; | |
| if (keylen > LARGE_KEY_SIZE) { | |
| printk(KERN_ERR "%s: BUG: Key %d has oversize length %d.\n", | |
| priv->ndev->name, priv->tx_key, keylen); | |
| return -E2BIG; | |
| } else if (keylen > SMALL_KEY_SIZE) | |
| keylen = LARGE_KEY_SIZE; | |
| else if (keylen > 0) | |
| keylen = SMALL_KEY_SIZE; | |
| else | |
| keylen = 0; | |
| /* Write all 4 keys */ | |
| for (i = 0; i < ORINOCO_MAX_KEYS; i++) { | |
| u8 key[LARGE_KEY_SIZE] = { 0 }; | |
| memcpy(key, priv->keys[i].key, | |
| priv->keys[i].key_len); | |
| err = hw->ops->write_ltv(hw, USER_BAP, | |
| HERMES_RID_CNFDEFAULTKEY0 + i, | |
| HERMES_BYTES_TO_RECLEN(keylen), | |
| key); | |
| if (err) | |
| return err; | |
| } | |
| /* Write the index of the key used in transmission */ | |
| err = hermes_write_wordrec(hw, USER_BAP, | |
| HERMES_RID_CNFWEPDEFAULTKEYID, | |
| priv->tx_key); | |
| if (err) | |
| return err; | |
| } | |
| break; | |
| } | |
| return 0; | |
| } | |
| int __orinoco_hw_setup_enc(struct orinoco_private *priv) | |
| { | |
| struct hermes *hw = &priv->hw; | |
| int err = 0; | |
| int master_wep_flag; | |
| int auth_flag; | |
| int enc_flag; | |
| /* Setup WEP keys */ | |
| if (priv->encode_alg == ORINOCO_ALG_WEP) | |
| __orinoco_hw_setup_wepkeys(priv); | |
| if (priv->wep_restrict) | |
| auth_flag = HERMES_AUTH_SHARED_KEY; | |
| else | |
| auth_flag = HERMES_AUTH_OPEN; | |
| if (priv->wpa_enabled) | |
| enc_flag = 2; | |
| else if (priv->encode_alg == ORINOCO_ALG_WEP) | |
| enc_flag = 1; | |
| else | |
| enc_flag = 0; | |
| switch (priv->firmware_type) { | |
| case FIRMWARE_TYPE_AGERE: /* Agere style WEP */ | |
| if (priv->encode_alg == ORINOCO_ALG_WEP) { | |
| /* Enable the shared-key authentication. */ | |
| err = hermes_write_wordrec(hw, USER_BAP, | |
| HERMES_RID_CNFAUTHENTICATION_AGERE, | |
| auth_flag); | |
| } | |
| err = hermes_write_wordrec(hw, USER_BAP, | |
| HERMES_RID_CNFWEPENABLED_AGERE, | |
| enc_flag); | |
| if (err) | |
| return err; | |
| if (priv->has_wpa) { | |
| /* Set WPA key management */ | |
| err = hermes_write_wordrec(hw, USER_BAP, | |
| HERMES_RID_CNFSETWPAAUTHMGMTSUITE_AGERE, | |
| priv->key_mgmt); | |
| if (err) | |
| return err; | |
| } | |
| break; | |
| case FIRMWARE_TYPE_INTERSIL: /* Intersil style WEP */ | |
| case FIRMWARE_TYPE_SYMBOL: /* Symbol style WEP */ | |
| if (priv->encode_alg == ORINOCO_ALG_WEP) { | |
| if (priv->wep_restrict || | |
| (priv->firmware_type == FIRMWARE_TYPE_SYMBOL)) | |
| master_wep_flag = HERMES_WEP_PRIVACY_INVOKED | | |
| HERMES_WEP_EXCL_UNENCRYPTED; | |
| else | |
| master_wep_flag = HERMES_WEP_PRIVACY_INVOKED; | |
| err = hermes_write_wordrec(hw, USER_BAP, | |
| HERMES_RID_CNFAUTHENTICATION, | |
| auth_flag); | |
| if (err) | |
| return err; | |
| } else | |
| master_wep_flag = 0; | |
| if (priv->iw_mode == NL80211_IFTYPE_MONITOR) | |
| master_wep_flag |= HERMES_WEP_HOST_DECRYPT; | |
| /* Master WEP setting : on/off */ | |
| err = hermes_write_wordrec(hw, USER_BAP, | |
| HERMES_RID_CNFWEPFLAGS_INTERSIL, | |
| master_wep_flag); | |
| if (err) | |
| return err; | |
| break; | |
| } | |
| return 0; | |
| } | |
| /* key must be 32 bytes, including the tx and rx MIC keys. | |
| * rsc must be NULL or up to 8 bytes | |
| * tsc must be NULL or up to 8 bytes | |
| */ | |
| int __orinoco_hw_set_tkip_key(struct orinoco_private *priv, int key_idx, | |
| int set_tx, const u8 *key, const u8 *rsc, | |
| size_t rsc_len, const u8 *tsc, size_t tsc_len) | |
| { | |
| struct { | |
| __le16 idx; | |
| u8 rsc[ORINOCO_SEQ_LEN]; | |
| u8 key[TKIP_KEYLEN]; | |
| u8 tx_mic[MIC_KEYLEN]; | |
| u8 rx_mic[MIC_KEYLEN]; | |
| u8 tsc[ORINOCO_SEQ_LEN]; | |
| } __packed buf; | |
| struct hermes *hw = &priv->hw; | |
| int ret; | |
| int err; | |
| int k; | |
| u16 xmitting; | |
| key_idx &= 0x3; | |
| if (set_tx) | |
| key_idx |= 0x8000; | |
| buf.idx = cpu_to_le16(key_idx); | |
| memcpy(buf.key, key, | |
| sizeof(buf.key) + sizeof(buf.tx_mic) + sizeof(buf.rx_mic)); | |
| if (rsc_len > sizeof(buf.rsc)) | |
| rsc_len = sizeof(buf.rsc); | |
| if (tsc_len > sizeof(buf.tsc)) | |
| tsc_len = sizeof(buf.tsc); | |
| memset(buf.rsc, 0, sizeof(buf.rsc)); | |
| memset(buf.tsc, 0, sizeof(buf.tsc)); | |
| if (rsc != NULL) | |
| memcpy(buf.rsc, rsc, rsc_len); | |
| if (tsc != NULL) | |
| memcpy(buf.tsc, tsc, tsc_len); | |
| else | |
| buf.tsc[4] = 0x10; | |
| /* Wait up to 100ms for tx queue to empty */ | |
| for (k = 100; k > 0; k--) { | |
| udelay(1000); | |
| ret = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_TXQUEUEEMPTY, | |
| &xmitting); | |
| if (ret || !xmitting) | |
| break; | |
| } | |
| if (k == 0) | |
| ret = -ETIMEDOUT; | |
| err = HERMES_WRITE_RECORD(hw, USER_BAP, | |
| HERMES_RID_CNFADDDEFAULTTKIPKEY_AGERE, | |
| &buf); | |
| return ret ? ret : err; | |
| } | |
| int orinoco_clear_tkip_key(struct orinoco_private *priv, int key_idx) | |
| { | |
| struct hermes *hw = &priv->hw; | |
| int err; | |
| err = hermes_write_wordrec(hw, USER_BAP, | |
| HERMES_RID_CNFREMDEFAULTTKIPKEY_AGERE, | |
| key_idx); | |
| if (err) | |
| printk(KERN_WARNING "%s: Error %d clearing TKIP key %d\n", | |
| priv->ndev->name, err, key_idx); | |
| return err; | |
| } | |
| int __orinoco_hw_set_multicast_list(struct orinoco_private *priv, | |
| struct net_device *dev, | |
| int mc_count, int promisc) | |
| { | |
| struct hermes *hw = &priv->hw; | |
| int err = 0; | |
| if (promisc != priv->promiscuous) { | |
| err = hermes_write_wordrec(hw, USER_BAP, | |
| HERMES_RID_CNFPROMISCUOUSMODE, | |
| promisc); | |
| if (err) { | |
| printk(KERN_ERR "%s: Error %d setting PROMISCUOUSMODE to 1.\n", | |
| priv->ndev->name, err); | |
| } else | |
| priv->promiscuous = promisc; | |
| } | |
| /* If we're not in promiscuous mode, then we need to set the | |
| * group address if either we want to multicast, or if we were | |
| * multicasting and want to stop */ | |
| if (!promisc && (mc_count || priv->mc_count)) { | |
| struct netdev_hw_addr *ha; | |
| struct hermes_multicast mclist; | |
| int i = 0; | |
| netdev_for_each_mc_addr(ha, dev) { | |
| if (i == mc_count) | |
| break; | |
| memcpy(mclist.addr[i++], ha->addr, ETH_ALEN); | |
| } | |
| err = hw->ops->write_ltv(hw, USER_BAP, | |
| HERMES_RID_CNFGROUPADDRESSES, | |
| HERMES_BYTES_TO_RECLEN(mc_count * ETH_ALEN), | |
| &mclist); | |
| if (err) | |
| printk(KERN_ERR "%s: Error %d setting multicast list.\n", | |
| priv->ndev->name, err); | |
| else | |
| priv->mc_count = mc_count; | |
| } | |
| return err; | |
| } | |
| /* Return : < 0 -> error code ; >= 0 -> length */ | |
| int orinoco_hw_get_essid(struct orinoco_private *priv, int *active, | |
| char buf[IW_ESSID_MAX_SIZE + 1]) | |
| { | |
| struct hermes *hw = &priv->hw; | |
| int err = 0; | |
| struct hermes_idstring essidbuf; | |
| char *p = (char *)(&essidbuf.val); | |
| int len; | |
| unsigned long flags; | |
| if (orinoco_lock(priv, &flags) != 0) | |
| return -EBUSY; | |
| if (strlen(priv->desired_essid) > 0) { | |
| /* We read the desired SSID from the hardware rather | |
| than from priv->desired_essid, just in case the | |
| firmware is allowed to change it on us. I'm not | |
| sure about this */ | |
| /* My guess is that the OWNSSID should always be whatever | |
| * we set to the card, whereas CURRENT_SSID is the one that | |
| * may change... - Jean II */ | |
| u16 rid; | |
| *active = 1; | |
| rid = (priv->port_type == 3) ? HERMES_RID_CNFOWNSSID : | |
| HERMES_RID_CNFDESIREDSSID; | |
| err = hw->ops->read_ltv(hw, USER_BAP, rid, sizeof(essidbuf), | |
| NULL, &essidbuf); | |
| if (err) | |
| goto fail_unlock; | |
| } else { | |
| *active = 0; | |
| err = hw->ops->read_ltv(hw, USER_BAP, HERMES_RID_CURRENTSSID, | |
| sizeof(essidbuf), NULL, &essidbuf); | |
| if (err) | |
| goto fail_unlock; | |
| } | |
| len = le16_to_cpu(essidbuf.len); | |
| BUG_ON(len > IW_ESSID_MAX_SIZE); | |
| memset(buf, 0, IW_ESSID_MAX_SIZE); | |
| memcpy(buf, p, len); | |
| err = len; | |
| fail_unlock: | |
| orinoco_unlock(priv, &flags); | |
| return err; | |
| } | |
| int orinoco_hw_get_freq(struct orinoco_private *priv) | |
| { | |
| struct hermes *hw = &priv->hw; | |
| int err = 0; | |
| u16 channel; | |
| int freq = 0; | |
| unsigned long flags; | |
| if (orinoco_lock(priv, &flags) != 0) | |
| return -EBUSY; | |
| err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_CURRENTCHANNEL, | |
| &channel); | |
| if (err) | |
| goto out; | |
| /* Intersil firmware 1.3.5 returns 0 when the interface is down */ | |
| if (channel == 0) { | |
| err = -EBUSY; | |
| goto out; | |
| } | |
| if ((channel < 1) || (channel > NUM_CHANNELS)) { | |
| printk(KERN_WARNING "%s: Channel out of range (%d)!\n", | |
| priv->ndev->name, channel); | |
| err = -EBUSY; | |
| goto out; | |
| } | |
| freq = ieee80211_channel_to_frequency(channel, IEEE80211_BAND_2GHZ); | |
| out: | |
| orinoco_unlock(priv, &flags); | |
| if (err > 0) | |
| err = -EBUSY; | |
| return err ? err : freq; | |
| } | |
| int orinoco_hw_get_bitratelist(struct orinoco_private *priv, | |
| int *numrates, s32 *rates, int max) | |
| { | |
| struct hermes *hw = &priv->hw; | |
| struct hermes_idstring list; | |
| unsigned char *p = (unsigned char *)&list.val; | |
| int err = 0; | |
| int num; | |
| int i; | |
| unsigned long flags; | |
| if (orinoco_lock(priv, &flags) != 0) | |
| return -EBUSY; | |
| err = hw->ops->read_ltv(hw, USER_BAP, HERMES_RID_SUPPORTEDDATARATES, | |
| sizeof(list), NULL, &list); | |
| orinoco_unlock(priv, &flags); | |
| if (err) | |
| return err; | |
| num = le16_to_cpu(list.len); | |
| *numrates = num; | |
| num = min(num, max); | |
| for (i = 0; i < num; i++) | |
| rates[i] = (p[i] & 0x7f) * 500000; /* convert to bps */ | |
| return 0; | |
| } | |
| int orinoco_hw_trigger_scan(struct orinoco_private *priv, | |
| const struct cfg80211_ssid *ssid) | |
| { | |
| struct net_device *dev = priv->ndev; | |
| struct hermes *hw = &priv->hw; | |
| unsigned long flags; | |
| int err = 0; | |
| if (orinoco_lock(priv, &flags) != 0) | |
| return -EBUSY; | |
| /* Scanning with port 0 disabled would fail */ | |
| if (!netif_running(dev)) { | |
| err = -ENETDOWN; | |
| goto out; | |
| } | |
| /* In monitor mode, the scan results are always empty. | |
| * Probe responses are passed to the driver as received | |
| * frames and could be processed in software. */ | |
| if (priv->iw_mode == NL80211_IFTYPE_MONITOR) { | |
| err = -EOPNOTSUPP; | |
| goto out; | |
| } | |
| if (priv->has_hostscan) { | |
| switch (priv->firmware_type) { | |
| case FIRMWARE_TYPE_SYMBOL: | |
| err = hermes_write_wordrec(hw, USER_BAP, | |
| HERMES_RID_CNFHOSTSCAN_SYMBOL, | |
| HERMES_HOSTSCAN_SYMBOL_ONCE | | |
| HERMES_HOSTSCAN_SYMBOL_BCAST); | |
| break; | |
| case FIRMWARE_TYPE_INTERSIL: { | |
| __le16 req[3]; | |
| req[0] = cpu_to_le16(0x3fff); /* All channels */ | |
| req[1] = cpu_to_le16(0x0001); /* rate 1 Mbps */ | |
| req[2] = 0; /* Any ESSID */ | |
| err = HERMES_WRITE_RECORD(hw, USER_BAP, | |
| HERMES_RID_CNFHOSTSCAN, &req); | |
| break; | |
| } | |
| case FIRMWARE_TYPE_AGERE: | |
| if (ssid->ssid_len > 0) { | |
| struct hermes_idstring idbuf; | |
| size_t len = ssid->ssid_len; | |
| idbuf.len = cpu_to_le16(len); | |
| memcpy(idbuf.val, ssid->ssid, len); | |
| err = hw->ops->write_ltv(hw, USER_BAP, | |
| HERMES_RID_CNFSCANSSID_AGERE, | |
| HERMES_BYTES_TO_RECLEN(len + 2), | |
| &idbuf); | |
| } else | |
| err = hermes_write_wordrec(hw, USER_BAP, | |
| HERMES_RID_CNFSCANSSID_AGERE, | |
| 0); /* Any ESSID */ | |
| if (err) | |
| break; | |
| if (priv->has_ext_scan) { | |
| err = hermes_write_wordrec(hw, USER_BAP, | |
| HERMES_RID_CNFSCANCHANNELS2GHZ, | |
| 0x7FFF); | |
| if (err) | |
| goto out; | |
| err = hermes_inquire(hw, | |
| HERMES_INQ_CHANNELINFO); | |
| } else | |
| err = hermes_inquire(hw, HERMES_INQ_SCAN); | |
| break; | |
| } | |
| } else | |
| err = hermes_inquire(hw, HERMES_INQ_SCAN); | |
| out: | |
| orinoco_unlock(priv, &flags); | |
| return err; | |
| } | |
| /* Disassociate from node with BSSID addr */ | |
| int orinoco_hw_disassociate(struct orinoco_private *priv, | |
| u8 *addr, u16 reason_code) | |
| { | |
| struct hermes *hw = &priv->hw; | |
| int err; | |
| struct { | |
| u8 addr[ETH_ALEN]; | |
| __le16 reason_code; | |
| } __packed buf; | |
| /* Currently only supported by WPA enabled Agere fw */ | |
| if (!priv->has_wpa) | |
| return -EOPNOTSUPP; | |
| memcpy(buf.addr, addr, ETH_ALEN); | |
| buf.reason_code = cpu_to_le16(reason_code); | |
| err = HERMES_WRITE_RECORD(hw, USER_BAP, | |
| HERMES_RID_CNFDISASSOCIATE, | |
| &buf); | |
| return err; | |
| } | |
| int orinoco_hw_get_current_bssid(struct orinoco_private *priv, | |
| u8 *addr) | |
| { | |
| struct hermes *hw = &priv->hw; | |
| int err; | |
| err = hw->ops->read_ltv(hw, USER_BAP, HERMES_RID_CURRENTBSSID, | |
| ETH_ALEN, NULL, addr); | |
| return err; | |
| } |