| /* | |
| * eeprom specific definitions for mac80211 Prism54 drivers | |
| * | |
| * Copyright (c) 2006, Michael Wu <flamingice@sourmilk.net> | |
| * Copyright (c) 2007-2009, Christian Lamparter <chunkeey@web.de> | |
| * | |
| * Based on: | |
| * - the islsm (softmac prism54) driver, which is: | |
| * Copyright 2004-2006 Jean-Baptiste Note <jbnote@gmail.com>, et al. | |
| * | |
| * - LMAC API interface header file for STLC4560 (lmac_longbow.h) | |
| * Copyright (C) 2007 Conexant Systems, Inc. | |
| * | |
| * - islmvc driver | |
| * Copyright (C) 2001 Intersil Americas Inc. | |
| * | |
| * This program is free software; you can redistribute it and/or modify | |
| * it under the terms of the GNU General Public License version 2 as | |
| * published by the Free Software Foundation. | |
| */ | |
| #ifndef EEPROM_H | |
| #define EEPROM_H | |
| /* PDA defines are Copyright (C) 2005 Nokia Corporation (taken from islsm_pda.h) */ | |
| struct pda_entry { | |
| __le16 len; /* includes both code and data */ | |
| __le16 code; | |
| u8 data[0]; | |
| } __packed; | |
| struct eeprom_pda_wrap { | |
| __le32 magic; | |
| __le16 pad; | |
| __le16 len; | |
| __le32 arm_opcode; | |
| u8 data[0]; | |
| } __packed; | |
| struct p54_iq_autocal_entry { | |
| __le16 iq_param[4]; | |
| } __packed; | |
| struct pda_iq_autocal_entry { | |
| __le16 freq; | |
| struct p54_iq_autocal_entry params; | |
| } __packed; | |
| struct pda_channel_output_limit { | |
| __le16 freq; | |
| u8 val_bpsk; | |
| u8 val_qpsk; | |
| u8 val_16qam; | |
| u8 val_64qam; | |
| u8 rate_set_mask; | |
| u8 rate_set_size; | |
| } __packed; | |
| struct pda_channel_output_limit_point_longbow { | |
| __le16 val_bpsk; | |
| __le16 val_qpsk; | |
| __le16 val_16qam; | |
| __le16 val_64qam; | |
| } __packed; | |
| struct pda_channel_output_limit_longbow { | |
| __le16 freq; | |
| struct pda_channel_output_limit_point_longbow point[3]; | |
| } __packed; | |
| struct pda_pa_curve_data_sample_rev0 { | |
| u8 rf_power; | |
| u8 pa_detector; | |
| u8 pcv; | |
| } __packed; | |
| struct pda_pa_curve_data_sample_rev1 { | |
| u8 rf_power; | |
| u8 pa_detector; | |
| u8 data_barker; | |
| u8 data_bpsk; | |
| u8 data_qpsk; | |
| u8 data_16qam; | |
| u8 data_64qam; | |
| } __packed; | |
| struct pda_pa_curve_data { | |
| u8 cal_method_rev; | |
| u8 channels; | |
| u8 points_per_channel; | |
| u8 padding; | |
| u8 data[0]; | |
| } __packed; | |
| struct pda_rssi_cal_ext_entry { | |
| __le16 freq; | |
| __le16 mul; | |
| __le16 add; | |
| } __packed; | |
| struct pda_rssi_cal_entry { | |
| __le16 mul; | |
| __le16 add; | |
| } __packed; | |
| struct pda_country { | |
| u8 regdomain; | |
| u8 alpha2[2]; | |
| u8 flags; | |
| } __packed; | |
| struct pda_antenna_gain { | |
| struct { | |
| u8 gain_5GHz; /* 0.25 dBi units */ | |
| u8 gain_2GHz; /* 0.25 dBi units */ | |
| } __packed antenna[0]; | |
| } __packed; | |
| struct pda_custom_wrapper { | |
| __le16 entries; | |
| __le16 entry_size; | |
| __le16 offset; | |
| __le16 len; | |
| u8 data[0]; | |
| } __packed; | |
| /* | |
| * this defines the PDR codes used to build PDAs as defined in document | |
| * number 553155. The current implementation mirrors version 1.1 of the | |
| * document and lists only PDRs supported by the ARM platform. | |
| */ | |
| /* common and choice range (0x0000 - 0x0fff) */ | |
| #define PDR_END 0x0000 | |
| #define PDR_MANUFACTURING_PART_NUMBER 0x0001 | |
| #define PDR_PDA_VERSION 0x0002 | |
| #define PDR_NIC_SERIAL_NUMBER 0x0003 | |
| #define PDR_NIC_RAM_SIZE 0x0005 | |
| #define PDR_RFMODEM_SUP_RANGE 0x0006 | |
| #define PDR_PRISM_MAC_SUP_RANGE 0x0007 | |
| #define PDR_NIC_ID 0x0008 | |
| #define PDR_MAC_ADDRESS 0x0101 | |
| #define PDR_REGULATORY_DOMAIN_LIST 0x0103 /* obsolete */ | |
| #define PDR_ALLOWED_CHAN_SET 0x0104 | |
| #define PDR_DEFAULT_CHAN 0x0105 | |
| #define PDR_TEMPERATURE_TYPE 0x0107 | |
| #define PDR_IFR_SETTING 0x0200 | |
| #define PDR_RFR_SETTING 0x0201 | |
| #define PDR_3861_BASELINE_REG_SETTINGS 0x0202 | |
| #define PDR_3861_SHADOW_REG_SETTINGS 0x0203 | |
| #define PDR_3861_IFRF_REG_SETTINGS 0x0204 | |
| #define PDR_3861_CHAN_CALIB_SET_POINTS 0x0300 | |
| #define PDR_3861_CHAN_CALIB_INTEGRATOR 0x0301 | |
| #define PDR_3842_PRISM_II_NIC_CONFIG 0x0400 | |
| #define PDR_PRISM_USB_ID 0x0401 | |
| #define PDR_PRISM_PCI_ID 0x0402 | |
| #define PDR_PRISM_PCI_IF_CONFIG 0x0403 | |
| #define PDR_PRISM_PCI_PM_CONFIG 0x0404 | |
| #define PDR_3861_MF_TEST_CHAN_SET_POINTS 0x0900 | |
| #define PDR_3861_MF_TEST_CHAN_INTEGRATORS 0x0901 | |
| /* ARM range (0x1000 - 0x1fff) */ | |
| #define PDR_COUNTRY_INFORMATION 0x1000 /* obsolete */ | |
| #define PDR_INTERFACE_LIST 0x1001 | |
| #define PDR_HARDWARE_PLATFORM_COMPONENT_ID 0x1002 | |
| #define PDR_OEM_NAME 0x1003 | |
| #define PDR_PRODUCT_NAME 0x1004 | |
| #define PDR_UTF8_OEM_NAME 0x1005 | |
| #define PDR_UTF8_PRODUCT_NAME 0x1006 | |
| #define PDR_COUNTRY_LIST 0x1007 | |
| #define PDR_DEFAULT_COUNTRY 0x1008 | |
| #define PDR_ANTENNA_GAIN 0x1100 | |
| #define PDR_PRISM_INDIGO_PA_CALIBRATION_DATA 0x1901 | |
| #define PDR_RSSI_LINEAR_APPROXIMATION 0x1902 | |
| #define PDR_PRISM_PA_CAL_OUTPUT_POWER_LIMITS 0x1903 | |
| #define PDR_PRISM_PA_CAL_CURVE_DATA 0x1904 | |
| #define PDR_RSSI_LINEAR_APPROXIMATION_DUAL_BAND 0x1905 | |
| #define PDR_PRISM_ZIF_TX_IQ_CALIBRATION 0x1906 | |
| #define PDR_REGULATORY_POWER_LIMITS 0x1907 | |
| #define PDR_RSSI_LINEAR_APPROXIMATION_EXTENDED 0x1908 | |
| #define PDR_RADIATED_TRANSMISSION_CORRECTION 0x1909 | |
| #define PDR_PRISM_TX_IQ_CALIBRATION 0x190a | |
| /* reserved range (0x2000 - 0x7fff) */ | |
| /* customer range (0x8000 - 0xffff) */ | |
| #define PDR_BASEBAND_REGISTERS 0x8000 | |
| #define PDR_PER_CHANNEL_BASEBAND_REGISTERS 0x8001 | |
| /* used by our modificated eeprom image */ | |
| #define PDR_RSSI_LINEAR_APPROXIMATION_CUSTOM 0xDEAD | |
| #define PDR_RSSI_LINEAR_APPROXIMATION_CUSTOMV2 0xCAFF | |
| #define PDR_PRISM_PA_CAL_OUTPUT_POWER_LIMITS_CUSTOM 0xBEEF | |
| #define PDR_PRISM_PA_CAL_CURVE_DATA_CUSTOM 0xB05D | |
| /* Interface Definitions */ | |
| #define PDR_INTERFACE_ROLE_SERVER 0x0000 | |
| #define PDR_INTERFACE_ROLE_CLIENT 0x0001 | |
| /* PDR definitions for default country & country list */ | |
| #define PDR_COUNTRY_CERT_CODE 0x80 | |
| #define PDR_COUNTRY_CERT_CODE_REAL 0x00 | |
| #define PDR_COUNTRY_CERT_CODE_PSEUDO 0x80 | |
| #define PDR_COUNTRY_CERT_BAND 0x40 | |
| #define PDR_COUNTRY_CERT_BAND_2GHZ 0x00 | |
| #define PDR_COUNTRY_CERT_BAND_5GHZ 0x40 | |
| #define PDR_COUNTRY_CERT_IODOOR 0x30 | |
| #define PDR_COUNTRY_CERT_IODOOR_BOTH 0x00 | |
| #define PDR_COUNTRY_CERT_IODOOR_INDOOR 0x20 | |
| #define PDR_COUNTRY_CERT_IODOOR_OUTDOOR 0x30 | |
| #define PDR_COUNTRY_CERT_INDEX 0x0f | |
| /* Specific LMAC FW/HW variant definitions */ | |
| #define PDR_SYNTH_FRONTEND_MASK 0x0007 | |
| #define PDR_SYNTH_FRONTEND_DUETTE3 0x0001 | |
| #define PDR_SYNTH_FRONTEND_DUETTE2 0x0002 | |
| #define PDR_SYNTH_FRONTEND_FRISBEE 0x0003 | |
| #define PDR_SYNTH_FRONTEND_XBOW 0x0004 | |
| #define PDR_SYNTH_FRONTEND_LONGBOW 0x0005 | |
| #define PDR_SYNTH_IQ_CAL_MASK 0x0018 | |
| #define PDR_SYNTH_IQ_CAL_PA_DETECTOR 0x0000 | |
| #define PDR_SYNTH_IQ_CAL_DISABLED 0x0008 | |
| #define PDR_SYNTH_IQ_CAL_ZIF 0x0010 | |
| #define PDR_SYNTH_FAA_SWITCH_MASK 0x0020 | |
| #define PDR_SYNTH_FAA_SWITCH_ENABLED 0x0020 | |
| #define PDR_SYNTH_24_GHZ_MASK 0x0040 | |
| #define PDR_SYNTH_24_GHZ_DISABLED 0x0040 | |
| #define PDR_SYNTH_5_GHZ_MASK 0x0080 | |
| #define PDR_SYNTH_5_GHZ_DISABLED 0x0080 | |
| #define PDR_SYNTH_RX_DIV_MASK 0x0100 | |
| #define PDR_SYNTH_RX_DIV_SUPPORTED 0x0100 | |
| #define PDR_SYNTH_TX_DIV_MASK 0x0200 | |
| #define PDR_SYNTH_TX_DIV_SUPPORTED 0x0200 | |
| #define PDR_SYNTH_ASM_MASK 0x0400 | |
| #define PDR_SYNTH_ASM_XSWON 0x0400 | |
| #endif /* EEPROM_H */ |