| /* | |
| * Copyright (C) 2008 Christian Lamparter <chunkeey@web.de> | |
| * Copyright 2008 Johannes Berg <johannes@sipsolutions.net> | |
| * | |
| * This driver is a port from stlc45xx: | |
| * Copyright (C) 2008 Nokia Corporation and/or its subsidiary(-ies). | |
| * | |
| * This program is free software; you can redistribute it and/or | |
| * modify it under the terms of the GNU General Public License | |
| * version 2 as published by the Free Software Foundation. | |
| * | |
| * This program is distributed in the hope that it will be useful, but | |
| * WITHOUT ANY WARRANTY; without even the implied warranty of | |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU | |
| * General Public License for more details. | |
| * | |
| * You should have received a copy of the GNU General Public License | |
| * along with this program; if not, write to the Free Software | |
| * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA | |
| * 02110-1301 USA | |
| */ | |
| #include <linux/module.h> | |
| #include <linux/platform_device.h> | |
| #include <linux/interrupt.h> | |
| #include <linux/firmware.h> | |
| #include <linux/delay.h> | |
| #include <linux/irq.h> | |
| #include <linux/spi/spi.h> | |
| #include <linux/etherdevice.h> | |
| #include <linux/gpio.h> | |
| #include <linux/slab.h> | |
| #include "p54spi.h" | |
| #include "p54.h" | |
| #include "lmac.h" | |
| #ifdef CONFIG_P54_SPI_DEFAULT_EEPROM | |
| #include "p54spi_eeprom.h" | |
| #endif /* CONFIG_P54_SPI_DEFAULT_EEPROM */ | |
| MODULE_FIRMWARE("3826.arm"); | |
| /* gpios should be handled in board files and provided via platform data, | |
| * but because it's currently impossible for p54spi to have a header file | |
| * in include/linux, let's use module paramaters for now | |
| */ | |
| static int p54spi_gpio_power = 97; | |
| module_param(p54spi_gpio_power, int, 0444); | |
| MODULE_PARM_DESC(p54spi_gpio_power, "gpio number for power line"); | |
| static int p54spi_gpio_irq = 87; | |
| module_param(p54spi_gpio_irq, int, 0444); | |
| MODULE_PARM_DESC(p54spi_gpio_irq, "gpio number for irq line"); | |
| static void p54spi_spi_read(struct p54s_priv *priv, u8 address, | |
| void *buf, size_t len) | |
| { | |
| struct spi_transfer t[2]; | |
| struct spi_message m; | |
| __le16 addr; | |
| /* We first push the address */ | |
| addr = cpu_to_le16(address << 8 | SPI_ADRS_READ_BIT_15); | |
| spi_message_init(&m); | |
| memset(t, 0, sizeof(t)); | |
| t[0].tx_buf = &addr; | |
| t[0].len = sizeof(addr); | |
| spi_message_add_tail(&t[0], &m); | |
| t[1].rx_buf = buf; | |
| t[1].len = len; | |
| spi_message_add_tail(&t[1], &m); | |
| spi_sync(priv->spi, &m); | |
| } | |
| static void p54spi_spi_write(struct p54s_priv *priv, u8 address, | |
| const void *buf, size_t len) | |
| { | |
| struct spi_transfer t[3]; | |
| struct spi_message m; | |
| __le16 addr; | |
| /* We first push the address */ | |
| addr = cpu_to_le16(address << 8); | |
| spi_message_init(&m); | |
| memset(t, 0, sizeof(t)); | |
| t[0].tx_buf = &addr; | |
| t[0].len = sizeof(addr); | |
| spi_message_add_tail(&t[0], &m); | |
| t[1].tx_buf = buf; | |
| t[1].len = len & ~1; | |
| spi_message_add_tail(&t[1], &m); | |
| if (len % 2) { | |
| __le16 last_word; | |
| last_word = cpu_to_le16(((u8 *)buf)[len - 1]); | |
| t[2].tx_buf = &last_word; | |
| t[2].len = sizeof(last_word); | |
| spi_message_add_tail(&t[2], &m); | |
| } | |
| spi_sync(priv->spi, &m); | |
| } | |
| static u32 p54spi_read32(struct p54s_priv *priv, u8 addr) | |
| { | |
| __le32 val; | |
| p54spi_spi_read(priv, addr, &val, sizeof(val)); | |
| return le32_to_cpu(val); | |
| } | |
| static inline void p54spi_write16(struct p54s_priv *priv, u8 addr, __le16 val) | |
| { | |
| p54spi_spi_write(priv, addr, &val, sizeof(val)); | |
| } | |
| static inline void p54spi_write32(struct p54s_priv *priv, u8 addr, __le32 val) | |
| { | |
| p54spi_spi_write(priv, addr, &val, sizeof(val)); | |
| } | |
| static int p54spi_wait_bit(struct p54s_priv *priv, u16 reg, u32 bits) | |
| { | |
| int i; | |
| for (i = 0; i < 2000; i++) { | |
| u32 buffer = p54spi_read32(priv, reg); | |
| if ((buffer & bits) == bits) | |
| return 1; | |
| } | |
| return 0; | |
| } | |
| static int p54spi_spi_write_dma(struct p54s_priv *priv, __le32 base, | |
| const void *buf, size_t len) | |
| { | |
| if (!p54spi_wait_bit(priv, SPI_ADRS_DMA_WRITE_CTRL, HOST_ALLOWED)) { | |
| dev_err(&priv->spi->dev, "spi_write_dma not allowed " | |
| "to DMA write.\n"); | |
| return -EAGAIN; | |
| } | |
| p54spi_write16(priv, SPI_ADRS_DMA_WRITE_CTRL, | |
| cpu_to_le16(SPI_DMA_WRITE_CTRL_ENABLE)); | |
| p54spi_write16(priv, SPI_ADRS_DMA_WRITE_LEN, cpu_to_le16(len)); | |
| p54spi_write32(priv, SPI_ADRS_DMA_WRITE_BASE, base); | |
| p54spi_spi_write(priv, SPI_ADRS_DMA_DATA, buf, len); | |
| return 0; | |
| } | |
| static int p54spi_request_firmware(struct ieee80211_hw *dev) | |
| { | |
| struct p54s_priv *priv = dev->priv; | |
| int ret; | |
| /* FIXME: should driver use it's own struct device? */ | |
| ret = request_firmware(&priv->firmware, "3826.arm", &priv->spi->dev); | |
| if (ret < 0) { | |
| dev_err(&priv->spi->dev, "request_firmware() failed: %d", ret); | |
| return ret; | |
| } | |
| ret = p54_parse_firmware(dev, priv->firmware); | |
| if (ret) { | |
| release_firmware(priv->firmware); | |
| return ret; | |
| } | |
| return 0; | |
| } | |
| static int p54spi_request_eeprom(struct ieee80211_hw *dev) | |
| { | |
| struct p54s_priv *priv = dev->priv; | |
| const struct firmware *eeprom; | |
| int ret; | |
| /* allow users to customize their eeprom. | |
| */ | |
| ret = request_firmware_direct(&eeprom, "3826.eeprom", &priv->spi->dev); | |
| if (ret < 0) { | |
| #ifdef CONFIG_P54_SPI_DEFAULT_EEPROM | |
| dev_info(&priv->spi->dev, "loading default eeprom...\n"); | |
| ret = p54_parse_eeprom(dev, (void *) p54spi_eeprom, | |
| sizeof(p54spi_eeprom)); | |
| #else | |
| dev_err(&priv->spi->dev, "Failed to request user eeprom\n"); | |
| #endif /* CONFIG_P54_SPI_DEFAULT_EEPROM */ | |
| } else { | |
| dev_info(&priv->spi->dev, "loading user eeprom...\n"); | |
| ret = p54_parse_eeprom(dev, (void *) eeprom->data, | |
| (int)eeprom->size); | |
| release_firmware(eeprom); | |
| } | |
| return ret; | |
| } | |
| static int p54spi_upload_firmware(struct ieee80211_hw *dev) | |
| { | |
| struct p54s_priv *priv = dev->priv; | |
| unsigned long fw_len, _fw_len; | |
| unsigned int offset = 0; | |
| int err = 0; | |
| u8 *fw; | |
| fw_len = priv->firmware->size; | |
| fw = kmemdup(priv->firmware->data, fw_len, GFP_KERNEL); | |
| if (!fw) | |
| return -ENOMEM; | |
| /* stop the device */ | |
| p54spi_write16(priv, SPI_ADRS_DEV_CTRL_STAT, cpu_to_le16( | |
| SPI_CTRL_STAT_HOST_OVERRIDE | SPI_CTRL_STAT_HOST_RESET | | |
| SPI_CTRL_STAT_START_HALTED)); | |
| msleep(TARGET_BOOT_SLEEP); | |
| p54spi_write16(priv, SPI_ADRS_DEV_CTRL_STAT, cpu_to_le16( | |
| SPI_CTRL_STAT_HOST_OVERRIDE | | |
| SPI_CTRL_STAT_START_HALTED)); | |
| msleep(TARGET_BOOT_SLEEP); | |
| while (fw_len > 0) { | |
| _fw_len = min_t(long, fw_len, SPI_MAX_PACKET_SIZE); | |
| err = p54spi_spi_write_dma(priv, cpu_to_le32( | |
| ISL38XX_DEV_FIRMWARE_ADDR + offset), | |
| (fw + offset), _fw_len); | |
| if (err < 0) | |
| goto out; | |
| fw_len -= _fw_len; | |
| offset += _fw_len; | |
| } | |
| BUG_ON(fw_len != 0); | |
| /* enable host interrupts */ | |
| p54spi_write32(priv, SPI_ADRS_HOST_INT_EN, | |
| cpu_to_le32(SPI_HOST_INTS_DEFAULT)); | |
| /* boot the device */ | |
| p54spi_write16(priv, SPI_ADRS_DEV_CTRL_STAT, cpu_to_le16( | |
| SPI_CTRL_STAT_HOST_OVERRIDE | SPI_CTRL_STAT_HOST_RESET | | |
| SPI_CTRL_STAT_RAM_BOOT)); | |
| msleep(TARGET_BOOT_SLEEP); | |
| p54spi_write16(priv, SPI_ADRS_DEV_CTRL_STAT, cpu_to_le16( | |
| SPI_CTRL_STAT_HOST_OVERRIDE | SPI_CTRL_STAT_RAM_BOOT)); | |
| msleep(TARGET_BOOT_SLEEP); | |
| out: | |
| kfree(fw); | |
| return err; | |
| } | |
| static void p54spi_power_off(struct p54s_priv *priv) | |
| { | |
| disable_irq(gpio_to_irq(p54spi_gpio_irq)); | |
| gpio_set_value(p54spi_gpio_power, 0); | |
| } | |
| static void p54spi_power_on(struct p54s_priv *priv) | |
| { | |
| gpio_set_value(p54spi_gpio_power, 1); | |
| enable_irq(gpio_to_irq(p54spi_gpio_irq)); | |
| /* need to wait a while before device can be accessed, the length | |
| * is just a guess | |
| */ | |
| msleep(10); | |
| } | |
| static inline void p54spi_int_ack(struct p54s_priv *priv, u32 val) | |
| { | |
| p54spi_write32(priv, SPI_ADRS_HOST_INT_ACK, cpu_to_le32(val)); | |
| } | |
| static int p54spi_wakeup(struct p54s_priv *priv) | |
| { | |
| /* wake the chip */ | |
| p54spi_write32(priv, SPI_ADRS_ARM_INTERRUPTS, | |
| cpu_to_le32(SPI_TARGET_INT_WAKEUP)); | |
| /* And wait for the READY interrupt */ | |
| if (!p54spi_wait_bit(priv, SPI_ADRS_HOST_INTERRUPTS, | |
| SPI_HOST_INT_READY)) { | |
| dev_err(&priv->spi->dev, "INT_READY timeout\n"); | |
| return -EBUSY; | |
| } | |
| p54spi_int_ack(priv, SPI_HOST_INT_READY); | |
| return 0; | |
| } | |
| static inline void p54spi_sleep(struct p54s_priv *priv) | |
| { | |
| p54spi_write32(priv, SPI_ADRS_ARM_INTERRUPTS, | |
| cpu_to_le32(SPI_TARGET_INT_SLEEP)); | |
| } | |
| static void p54spi_int_ready(struct p54s_priv *priv) | |
| { | |
| p54spi_write32(priv, SPI_ADRS_HOST_INT_EN, cpu_to_le32( | |
| SPI_HOST_INT_UPDATE | SPI_HOST_INT_SW_UPDATE)); | |
| switch (priv->fw_state) { | |
| case FW_STATE_BOOTING: | |
| priv->fw_state = FW_STATE_READY; | |
| complete(&priv->fw_comp); | |
| break; | |
| case FW_STATE_RESETTING: | |
| priv->fw_state = FW_STATE_READY; | |
| /* TODO: reinitialize state */ | |
| break; | |
| default: | |
| break; | |
| } | |
| } | |
| static int p54spi_rx(struct p54s_priv *priv) | |
| { | |
| struct sk_buff *skb; | |
| u16 len; | |
| u16 rx_head[2]; | |
| #define READAHEAD_SZ (sizeof(rx_head)-sizeof(u16)) | |
| if (p54spi_wakeup(priv) < 0) | |
| return -EBUSY; | |
| /* Read data size and first data word in one SPI transaction | |
| * This is workaround for firmware/DMA bug, | |
| * when first data word gets lost under high load. | |
| */ | |
| p54spi_spi_read(priv, SPI_ADRS_DMA_DATA, rx_head, sizeof(rx_head)); | |
| len = rx_head[0]; | |
| if (len == 0) { | |
| p54spi_sleep(priv); | |
| dev_err(&priv->spi->dev, "rx request of zero bytes\n"); | |
| return 0; | |
| } | |
| /* Firmware may insert up to 4 padding bytes after the lmac header, | |
| * but it does not amend the size of SPI data transfer. | |
| * Such packets has correct data size in header, thus referencing | |
| * past the end of allocated skb. Reserve extra 4 bytes for this case | |
| */ | |
| skb = dev_alloc_skb(len + 4); | |
| if (!skb) { | |
| p54spi_sleep(priv); | |
| dev_err(&priv->spi->dev, "could not alloc skb"); | |
| return -ENOMEM; | |
| } | |
| if (len <= READAHEAD_SZ) { | |
| memcpy(skb_put(skb, len), rx_head + 1, len); | |
| } else { | |
| memcpy(skb_put(skb, READAHEAD_SZ), rx_head + 1, READAHEAD_SZ); | |
| p54spi_spi_read(priv, SPI_ADRS_DMA_DATA, | |
| skb_put(skb, len - READAHEAD_SZ), | |
| len - READAHEAD_SZ); | |
| } | |
| p54spi_sleep(priv); | |
| /* Put additional bytes to compensate for the possible | |
| * alignment-caused truncation | |
| */ | |
| skb_put(skb, 4); | |
| if (p54_rx(priv->hw, skb) == 0) | |
| dev_kfree_skb(skb); | |
| return 0; | |
| } | |
| static irqreturn_t p54spi_interrupt(int irq, void *config) | |
| { | |
| struct spi_device *spi = config; | |
| struct p54s_priv *priv = spi_get_drvdata(spi); | |
| ieee80211_queue_work(priv->hw, &priv->work); | |
| return IRQ_HANDLED; | |
| } | |
| static int p54spi_tx_frame(struct p54s_priv *priv, struct sk_buff *skb) | |
| { | |
| struct p54_hdr *hdr = (struct p54_hdr *) skb->data; | |
| int ret = 0; | |
| if (p54spi_wakeup(priv) < 0) | |
| return -EBUSY; | |
| ret = p54spi_spi_write_dma(priv, hdr->req_id, skb->data, skb->len); | |
| if (ret < 0) | |
| goto out; | |
| if (!p54spi_wait_bit(priv, SPI_ADRS_HOST_INTERRUPTS, | |
| SPI_HOST_INT_WR_READY)) { | |
| dev_err(&priv->spi->dev, "WR_READY timeout\n"); | |
| ret = -EAGAIN; | |
| goto out; | |
| } | |
| p54spi_int_ack(priv, SPI_HOST_INT_WR_READY); | |
| if (FREE_AFTER_TX(skb)) | |
| p54_free_skb(priv->hw, skb); | |
| out: | |
| p54spi_sleep(priv); | |
| return ret; | |
| } | |
| static int p54spi_wq_tx(struct p54s_priv *priv) | |
| { | |
| struct p54s_tx_info *entry; | |
| struct sk_buff *skb; | |
| struct ieee80211_tx_info *info; | |
| struct p54_tx_info *minfo; | |
| struct p54s_tx_info *dinfo; | |
| unsigned long flags; | |
| int ret = 0; | |
| spin_lock_irqsave(&priv->tx_lock, flags); | |
| while (!list_empty(&priv->tx_pending)) { | |
| entry = list_entry(priv->tx_pending.next, | |
| struct p54s_tx_info, tx_list); | |
| list_del_init(&entry->tx_list); | |
| spin_unlock_irqrestore(&priv->tx_lock, flags); | |
| dinfo = container_of((void *) entry, struct p54s_tx_info, | |
| tx_list); | |
| minfo = container_of((void *) dinfo, struct p54_tx_info, | |
| data); | |
| info = container_of((void *) minfo, struct ieee80211_tx_info, | |
| rate_driver_data); | |
| skb = container_of((void *) info, struct sk_buff, cb); | |
| ret = p54spi_tx_frame(priv, skb); | |
| if (ret < 0) { | |
| p54_free_skb(priv->hw, skb); | |
| return ret; | |
| } | |
| spin_lock_irqsave(&priv->tx_lock, flags); | |
| } | |
| spin_unlock_irqrestore(&priv->tx_lock, flags); | |
| return ret; | |
| } | |
| static void p54spi_op_tx(struct ieee80211_hw *dev, struct sk_buff *skb) | |
| { | |
| struct p54s_priv *priv = dev->priv; | |
| struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); | |
| struct p54_tx_info *mi = (struct p54_tx_info *) info->rate_driver_data; | |
| struct p54s_tx_info *di = (struct p54s_tx_info *) mi->data; | |
| unsigned long flags; | |
| BUILD_BUG_ON(sizeof(*di) > sizeof((mi->data))); | |
| spin_lock_irqsave(&priv->tx_lock, flags); | |
| list_add_tail(&di->tx_list, &priv->tx_pending); | |
| spin_unlock_irqrestore(&priv->tx_lock, flags); | |
| ieee80211_queue_work(priv->hw, &priv->work); | |
| } | |
| static void p54spi_work(struct work_struct *work) | |
| { | |
| struct p54s_priv *priv = container_of(work, struct p54s_priv, work); | |
| u32 ints; | |
| int ret; | |
| mutex_lock(&priv->mutex); | |
| if (priv->fw_state == FW_STATE_OFF) | |
| goto out; | |
| ints = p54spi_read32(priv, SPI_ADRS_HOST_INTERRUPTS); | |
| if (ints & SPI_HOST_INT_READY) { | |
| p54spi_int_ready(priv); | |
| p54spi_int_ack(priv, SPI_HOST_INT_READY); | |
| } | |
| if (priv->fw_state != FW_STATE_READY) | |
| goto out; | |
| if (ints & SPI_HOST_INT_UPDATE) { | |
| p54spi_int_ack(priv, SPI_HOST_INT_UPDATE); | |
| ret = p54spi_rx(priv); | |
| if (ret < 0) | |
| goto out; | |
| } | |
| if (ints & SPI_HOST_INT_SW_UPDATE) { | |
| p54spi_int_ack(priv, SPI_HOST_INT_SW_UPDATE); | |
| ret = p54spi_rx(priv); | |
| if (ret < 0) | |
| goto out; | |
| } | |
| ret = p54spi_wq_tx(priv); | |
| out: | |
| mutex_unlock(&priv->mutex); | |
| } | |
| static int p54spi_op_start(struct ieee80211_hw *dev) | |
| { | |
| struct p54s_priv *priv = dev->priv; | |
| unsigned long timeout; | |
| int ret = 0; | |
| if (mutex_lock_interruptible(&priv->mutex)) { | |
| ret = -EINTR; | |
| goto out; | |
| } | |
| priv->fw_state = FW_STATE_BOOTING; | |
| p54spi_power_on(priv); | |
| ret = p54spi_upload_firmware(dev); | |
| if (ret < 0) { | |
| p54spi_power_off(priv); | |
| goto out_unlock; | |
| } | |
| mutex_unlock(&priv->mutex); | |
| timeout = msecs_to_jiffies(2000); | |
| timeout = wait_for_completion_interruptible_timeout(&priv->fw_comp, | |
| timeout); | |
| if (!timeout) { | |
| dev_err(&priv->spi->dev, "firmware boot failed"); | |
| p54spi_power_off(priv); | |
| ret = -1; | |
| goto out; | |
| } | |
| if (mutex_lock_interruptible(&priv->mutex)) { | |
| ret = -EINTR; | |
| p54spi_power_off(priv); | |
| goto out; | |
| } | |
| WARN_ON(priv->fw_state != FW_STATE_READY); | |
| out_unlock: | |
| mutex_unlock(&priv->mutex); | |
| out: | |
| return ret; | |
| } | |
| static void p54spi_op_stop(struct ieee80211_hw *dev) | |
| { | |
| struct p54s_priv *priv = dev->priv; | |
| unsigned long flags; | |
| mutex_lock(&priv->mutex); | |
| WARN_ON(priv->fw_state != FW_STATE_READY); | |
| p54spi_power_off(priv); | |
| spin_lock_irqsave(&priv->tx_lock, flags); | |
| INIT_LIST_HEAD(&priv->tx_pending); | |
| spin_unlock_irqrestore(&priv->tx_lock, flags); | |
| priv->fw_state = FW_STATE_OFF; | |
| mutex_unlock(&priv->mutex); | |
| cancel_work_sync(&priv->work); | |
| } | |
| static int p54spi_probe(struct spi_device *spi) | |
| { | |
| struct p54s_priv *priv = NULL; | |
| struct ieee80211_hw *hw; | |
| int ret = -EINVAL; | |
| hw = p54_init_common(sizeof(*priv)); | |
| if (!hw) { | |
| dev_err(&spi->dev, "could not alloc ieee80211_hw"); | |
| return -ENOMEM; | |
| } | |
| priv = hw->priv; | |
| priv->hw = hw; | |
| spi_set_drvdata(spi, priv); | |
| priv->spi = spi; | |
| spi->bits_per_word = 16; | |
| spi->max_speed_hz = 24000000; | |
| ret = spi_setup(spi); | |
| if (ret < 0) { | |
| dev_err(&priv->spi->dev, "spi_setup failed"); | |
| goto err_free; | |
| } | |
| ret = gpio_request(p54spi_gpio_power, "p54spi power"); | |
| if (ret < 0) { | |
| dev_err(&priv->spi->dev, "power GPIO request failed: %d", ret); | |
| goto err_free; | |
| } | |
| ret = gpio_request(p54spi_gpio_irq, "p54spi irq"); | |
| if (ret < 0) { | |
| dev_err(&priv->spi->dev, "irq GPIO request failed: %d", ret); | |
| goto err_free_gpio_power; | |
| } | |
| gpio_direction_output(p54spi_gpio_power, 0); | |
| gpio_direction_input(p54spi_gpio_irq); | |
| ret = request_irq(gpio_to_irq(p54spi_gpio_irq), | |
| p54spi_interrupt, 0, "p54spi", | |
| priv->spi); | |
| if (ret < 0) { | |
| dev_err(&priv->spi->dev, "request_irq() failed"); | |
| goto err_free_gpio_irq; | |
| } | |
| irq_set_irq_type(gpio_to_irq(p54spi_gpio_irq), IRQ_TYPE_EDGE_RISING); | |
| disable_irq(gpio_to_irq(p54spi_gpio_irq)); | |
| INIT_WORK(&priv->work, p54spi_work); | |
| init_completion(&priv->fw_comp); | |
| INIT_LIST_HEAD(&priv->tx_pending); | |
| mutex_init(&priv->mutex); | |
| spin_lock_init(&priv->tx_lock); | |
| SET_IEEE80211_DEV(hw, &spi->dev); | |
| priv->common.open = p54spi_op_start; | |
| priv->common.stop = p54spi_op_stop; | |
| priv->common.tx = p54spi_op_tx; | |
| ret = p54spi_request_firmware(hw); | |
| if (ret < 0) | |
| goto err_free_common; | |
| ret = p54spi_request_eeprom(hw); | |
| if (ret) | |
| goto err_free_common; | |
| ret = p54_register_common(hw, &priv->spi->dev); | |
| if (ret) | |
| goto err_free_common; | |
| return 0; | |
| err_free_common: | |
| free_irq(gpio_to_irq(p54spi_gpio_irq), spi); | |
| err_free_gpio_irq: | |
| gpio_free(p54spi_gpio_irq); | |
| err_free_gpio_power: | |
| gpio_free(p54spi_gpio_power); | |
| err_free: | |
| p54_free_common(priv->hw); | |
| return ret; | |
| } | |
| static int p54spi_remove(struct spi_device *spi) | |
| { | |
| struct p54s_priv *priv = spi_get_drvdata(spi); | |
| p54_unregister_common(priv->hw); | |
| free_irq(gpio_to_irq(p54spi_gpio_irq), spi); | |
| gpio_free(p54spi_gpio_power); | |
| gpio_free(p54spi_gpio_irq); | |
| release_firmware(priv->firmware); | |
| mutex_destroy(&priv->mutex); | |
| p54_free_common(priv->hw); | |
| return 0; | |
| } | |
| static struct spi_driver p54spi_driver = { | |
| .driver = { | |
| .name = "p54spi", | |
| }, | |
| .probe = p54spi_probe, | |
| .remove = p54spi_remove, | |
| }; | |
| module_spi_driver(p54spi_driver); | |
| MODULE_LICENSE("GPL"); | |
| MODULE_AUTHOR("Christian Lamparter <chunkeey@web.de>"); | |
| MODULE_ALIAS("spi:cx3110x"); | |
| MODULE_ALIAS("spi:p54spi"); | |
| MODULE_ALIAS("spi:stlc45xx"); |