| /* | |
| * Common code for mac80211 Prism54 drivers | |
| * | |
| * Copyright (c) 2006, Michael Wu <flamingice@sourmilk.net> | |
| * Copyright (c) 2007-2009, Christian Lamparter <chunkeey@web.de> | |
| * Copyright 2008, Johannes Berg <johannes@sipsolutions.net> | |
| * | |
| * Based on: | |
| * - the islsm (softmac prism54) driver, which is: | |
| * Copyright 2004-2006 Jean-Baptiste Note <jbnote@gmail.com>, et al. | |
| * - stlc45xx driver | |
| * Copyright (C) 2008 Nokia Corporation and/or its subsidiary(-ies). | |
| * | |
| * This program is free software; you can redistribute it and/or modify | |
| * it under the terms of the GNU General Public License version 2 as | |
| * published by the Free Software Foundation. | |
| */ | |
| #include <linux/export.h> | |
| #include <linux/firmware.h> | |
| #include <linux/etherdevice.h> | |
| #include <asm/div64.h> | |
| #include <net/mac80211.h> | |
| #include "p54.h" | |
| #include "lmac.h" | |
| #ifdef P54_MM_DEBUG | |
| static void p54_dump_tx_queue(struct p54_common *priv) | |
| { | |
| unsigned long flags; | |
| struct ieee80211_tx_info *info; | |
| struct p54_tx_info *range; | |
| struct sk_buff *skb; | |
| struct p54_hdr *hdr; | |
| unsigned int i = 0; | |
| u32 prev_addr; | |
| u32 largest_hole = 0, free; | |
| spin_lock_irqsave(&priv->tx_queue.lock, flags); | |
| wiphy_debug(priv->hw->wiphy, "/ --- tx queue dump (%d entries) ---\n", | |
| skb_queue_len(&priv->tx_queue)); | |
| prev_addr = priv->rx_start; | |
| skb_queue_walk(&priv->tx_queue, skb) { | |
| info = IEEE80211_SKB_CB(skb); | |
| range = (void *) info->rate_driver_data; | |
| hdr = (void *) skb->data; | |
| free = range->start_addr - prev_addr; | |
| wiphy_debug(priv->hw->wiphy, | |
| "| [%02d] => [skb:%p skb_len:0x%04x " | |
| "hdr:{flags:%02x len:%04x req_id:%04x type:%02x} " | |
| "mem:{start:%04x end:%04x, free:%d}]\n", | |
| i++, skb, skb->len, | |
| le16_to_cpu(hdr->flags), le16_to_cpu(hdr->len), | |
| le32_to_cpu(hdr->req_id), le16_to_cpu(hdr->type), | |
| range->start_addr, range->end_addr, free); | |
| prev_addr = range->end_addr; | |
| largest_hole = max(largest_hole, free); | |
| } | |
| free = priv->rx_end - prev_addr; | |
| largest_hole = max(largest_hole, free); | |
| wiphy_debug(priv->hw->wiphy, | |
| "\\ --- [free: %d], largest free block: %d ---\n", | |
| free, largest_hole); | |
| spin_unlock_irqrestore(&priv->tx_queue.lock, flags); | |
| } | |
| #endif /* P54_MM_DEBUG */ | |
| /* | |
| * So, the firmware is somewhat stupid and doesn't know what places in its | |
| * memory incoming data should go to. By poking around in the firmware, we | |
| * can find some unused memory to upload our packets to. However, data that we | |
| * want the card to TX needs to stay intact until the card has told us that | |
| * it is done with it. This function finds empty places we can upload to and | |
| * marks allocated areas as reserved if necessary. p54_find_and_unlink_skb or | |
| * p54_free_skb frees allocated areas. | |
| */ | |
| static int p54_assign_address(struct p54_common *priv, struct sk_buff *skb) | |
| { | |
| struct sk_buff *entry, *target_skb = NULL; | |
| struct ieee80211_tx_info *info; | |
| struct p54_tx_info *range; | |
| struct p54_hdr *data = (void *) skb->data; | |
| unsigned long flags; | |
| u32 last_addr = priv->rx_start; | |
| u32 target_addr = priv->rx_start; | |
| u16 len = priv->headroom + skb->len + priv->tailroom + 3; | |
| info = IEEE80211_SKB_CB(skb); | |
| range = (void *) info->rate_driver_data; | |
| len = (range->extra_len + len) & ~0x3; | |
| spin_lock_irqsave(&priv->tx_queue.lock, flags); | |
| if (unlikely(skb_queue_len(&priv->tx_queue) == 32)) { | |
| /* | |
| * The tx_queue is now really full. | |
| * | |
| * TODO: check if the device has crashed and reset it. | |
| */ | |
| spin_unlock_irqrestore(&priv->tx_queue.lock, flags); | |
| return -EBUSY; | |
| } | |
| skb_queue_walk(&priv->tx_queue, entry) { | |
| u32 hole_size; | |
| info = IEEE80211_SKB_CB(entry); | |
| range = (void *) info->rate_driver_data; | |
| hole_size = range->start_addr - last_addr; | |
| if (!target_skb && hole_size >= len) { | |
| target_skb = entry->prev; | |
| hole_size -= len; | |
| target_addr = last_addr; | |
| break; | |
| } | |
| last_addr = range->end_addr; | |
| } | |
| if (unlikely(!target_skb)) { | |
| if (priv->rx_end - last_addr >= len) { | |
| target_skb = priv->tx_queue.prev; | |
| if (!skb_queue_empty(&priv->tx_queue)) { | |
| info = IEEE80211_SKB_CB(target_skb); | |
| range = (void *)info->rate_driver_data; | |
| target_addr = range->end_addr; | |
| } | |
| } else { | |
| spin_unlock_irqrestore(&priv->tx_queue.lock, flags); | |
| return -ENOSPC; | |
| } | |
| } | |
| info = IEEE80211_SKB_CB(skb); | |
| range = (void *) info->rate_driver_data; | |
| range->start_addr = target_addr; | |
| range->end_addr = target_addr + len; | |
| data->req_id = cpu_to_le32(target_addr + priv->headroom); | |
| if (IS_DATA_FRAME(skb) && | |
| unlikely(GET_HW_QUEUE(skb) == P54_QUEUE_BEACON)) | |
| priv->beacon_req_id = data->req_id; | |
| __skb_queue_after(&priv->tx_queue, target_skb, skb); | |
| spin_unlock_irqrestore(&priv->tx_queue.lock, flags); | |
| return 0; | |
| } | |
| static void p54_tx_pending(struct p54_common *priv) | |
| { | |
| struct sk_buff *skb; | |
| int ret; | |
| skb = skb_dequeue(&priv->tx_pending); | |
| if (unlikely(!skb)) | |
| return ; | |
| ret = p54_assign_address(priv, skb); | |
| if (unlikely(ret)) | |
| skb_queue_head(&priv->tx_pending, skb); | |
| else | |
| priv->tx(priv->hw, skb); | |
| } | |
| static void p54_wake_queues(struct p54_common *priv) | |
| { | |
| unsigned long flags; | |
| unsigned int i; | |
| if (unlikely(priv->mode == NL80211_IFTYPE_UNSPECIFIED)) | |
| return ; | |
| p54_tx_pending(priv); | |
| spin_lock_irqsave(&priv->tx_stats_lock, flags); | |
| for (i = 0; i < priv->hw->queues; i++) { | |
| if (priv->tx_stats[i + P54_QUEUE_DATA].len < | |
| priv->tx_stats[i + P54_QUEUE_DATA].limit) | |
| ieee80211_wake_queue(priv->hw, i); | |
| } | |
| spin_unlock_irqrestore(&priv->tx_stats_lock, flags); | |
| } | |
| static int p54_tx_qos_accounting_alloc(struct p54_common *priv, | |
| struct sk_buff *skb, | |
| const u16 p54_queue) | |
| { | |
| struct p54_tx_queue_stats *queue; | |
| unsigned long flags; | |
| if (WARN_ON(p54_queue >= P54_QUEUE_NUM)) | |
| return -EINVAL; | |
| queue = &priv->tx_stats[p54_queue]; | |
| spin_lock_irqsave(&priv->tx_stats_lock, flags); | |
| if (unlikely(queue->len >= queue->limit && IS_QOS_QUEUE(p54_queue))) { | |
| spin_unlock_irqrestore(&priv->tx_stats_lock, flags); | |
| return -ENOSPC; | |
| } | |
| queue->len++; | |
| queue->count++; | |
| if (unlikely(queue->len == queue->limit && IS_QOS_QUEUE(p54_queue))) { | |
| u16 ac_queue = p54_queue - P54_QUEUE_DATA; | |
| ieee80211_stop_queue(priv->hw, ac_queue); | |
| } | |
| spin_unlock_irqrestore(&priv->tx_stats_lock, flags); | |
| return 0; | |
| } | |
| static void p54_tx_qos_accounting_free(struct p54_common *priv, | |
| struct sk_buff *skb) | |
| { | |
| if (IS_DATA_FRAME(skb)) { | |
| unsigned long flags; | |
| spin_lock_irqsave(&priv->tx_stats_lock, flags); | |
| priv->tx_stats[GET_HW_QUEUE(skb)].len--; | |
| spin_unlock_irqrestore(&priv->tx_stats_lock, flags); | |
| if (unlikely(GET_HW_QUEUE(skb) == P54_QUEUE_BEACON)) { | |
| if (priv->beacon_req_id == GET_REQ_ID(skb)) { | |
| /* this is the active beacon set anymore */ | |
| priv->beacon_req_id = 0; | |
| } | |
| complete(&priv->beacon_comp); | |
| } | |
| } | |
| p54_wake_queues(priv); | |
| } | |
| void p54_free_skb(struct ieee80211_hw *dev, struct sk_buff *skb) | |
| { | |
| struct p54_common *priv = dev->priv; | |
| if (unlikely(!skb)) | |
| return ; | |
| skb_unlink(skb, &priv->tx_queue); | |
| p54_tx_qos_accounting_free(priv, skb); | |
| ieee80211_free_txskb(dev, skb); | |
| } | |
| EXPORT_SYMBOL_GPL(p54_free_skb); | |
| static struct sk_buff *p54_find_and_unlink_skb(struct p54_common *priv, | |
| const __le32 req_id) | |
| { | |
| struct sk_buff *entry; | |
| unsigned long flags; | |
| spin_lock_irqsave(&priv->tx_queue.lock, flags); | |
| skb_queue_walk(&priv->tx_queue, entry) { | |
| struct p54_hdr *hdr = (struct p54_hdr *) entry->data; | |
| if (hdr->req_id == req_id) { | |
| __skb_unlink(entry, &priv->tx_queue); | |
| spin_unlock_irqrestore(&priv->tx_queue.lock, flags); | |
| p54_tx_qos_accounting_free(priv, entry); | |
| return entry; | |
| } | |
| } | |
| spin_unlock_irqrestore(&priv->tx_queue.lock, flags); | |
| return NULL; | |
| } | |
| void p54_tx(struct p54_common *priv, struct sk_buff *skb) | |
| { | |
| skb_queue_tail(&priv->tx_pending, skb); | |
| p54_tx_pending(priv); | |
| } | |
| static int p54_rssi_to_dbm(struct p54_common *priv, int rssi) | |
| { | |
| if (priv->rxhw != 5) { | |
| return ((rssi * priv->cur_rssi->mul) / 64 + | |
| priv->cur_rssi->add) / 4; | |
| } else { | |
| /* | |
| * TODO: find the correct formula | |
| */ | |
| return rssi / 2 - 110; | |
| } | |
| } | |
| /* | |
| * Even if the firmware is capable of dealing with incoming traffic, | |
| * while dozing, we have to prepared in case mac80211 uses PS-POLL | |
| * to retrieve outstanding frames from our AP. | |
| * (see comment in net/mac80211/mlme.c @ line 1993) | |
| */ | |
| static void p54_pspoll_workaround(struct p54_common *priv, struct sk_buff *skb) | |
| { | |
| struct ieee80211_hdr *hdr = (void *) skb->data; | |
| struct ieee80211_tim_ie *tim_ie; | |
| u8 *tim; | |
| u8 tim_len; | |
| bool new_psm; | |
| /* only beacons have a TIM IE */ | |
| if (!ieee80211_is_beacon(hdr->frame_control)) | |
| return; | |
| if (!priv->aid) | |
| return; | |
| /* only consider beacons from the associated BSSID */ | |
| if (!ether_addr_equal_64bits(hdr->addr3, priv->bssid)) | |
| return; | |
| tim = p54_find_ie(skb, WLAN_EID_TIM); | |
| if (!tim) | |
| return; | |
| tim_len = tim[1]; | |
| tim_ie = (struct ieee80211_tim_ie *) &tim[2]; | |
| new_psm = ieee80211_check_tim(tim_ie, tim_len, priv->aid); | |
| if (new_psm != priv->powersave_override) { | |
| priv->powersave_override = new_psm; | |
| p54_set_ps(priv); | |
| } | |
| } | |
| static int p54_rx_data(struct p54_common *priv, struct sk_buff *skb) | |
| { | |
| struct p54_rx_data *hdr = (struct p54_rx_data *) skb->data; | |
| struct ieee80211_rx_status *rx_status = IEEE80211_SKB_RXCB(skb); | |
| u16 freq = le16_to_cpu(hdr->freq); | |
| size_t header_len = sizeof(*hdr); | |
| u32 tsf32; | |
| u8 rate = hdr->rate & 0xf; | |
| /* | |
| * If the device is in a unspecified state we have to | |
| * ignore all data frames. Else we could end up with a | |
| * nasty crash. | |
| */ | |
| if (unlikely(priv->mode == NL80211_IFTYPE_UNSPECIFIED)) | |
| return 0; | |
| if (!(hdr->flags & cpu_to_le16(P54_HDR_FLAG_DATA_IN_FCS_GOOD))) | |
| return 0; | |
| if (hdr->decrypt_status == P54_DECRYPT_OK) | |
| rx_status->flag |= RX_FLAG_DECRYPTED; | |
| if ((hdr->decrypt_status == P54_DECRYPT_FAIL_MICHAEL) || | |
| (hdr->decrypt_status == P54_DECRYPT_FAIL_TKIP)) | |
| rx_status->flag |= RX_FLAG_MMIC_ERROR; | |
| rx_status->signal = p54_rssi_to_dbm(priv, hdr->rssi); | |
| if (hdr->rate & 0x10) | |
| rx_status->flag |= RX_FLAG_SHORTPRE; | |
| if (priv->hw->conf.chandef.chan->band == IEEE80211_BAND_5GHZ) | |
| rx_status->rate_idx = (rate < 4) ? 0 : rate - 4; | |
| else | |
| rx_status->rate_idx = rate; | |
| rx_status->freq = freq; | |
| rx_status->band = priv->hw->conf.chandef.chan->band; | |
| rx_status->antenna = hdr->antenna; | |
| tsf32 = le32_to_cpu(hdr->tsf32); | |
| if (tsf32 < priv->tsf_low32) | |
| priv->tsf_high32++; | |
| rx_status->mactime = ((u64)priv->tsf_high32) << 32 | tsf32; | |
| priv->tsf_low32 = tsf32; | |
| /* LMAC API Page 10/29 - s_lm_data_in - clock | |
| * "usec accurate timestamp of hardware clock | |
| * at end of frame (before OFDM SIFS EOF padding" | |
| */ | |
| rx_status->flag |= RX_FLAG_MACTIME_END; | |
| if (hdr->flags & cpu_to_le16(P54_HDR_FLAG_DATA_ALIGN)) | |
| header_len += hdr->align[0]; | |
| skb_pull(skb, header_len); | |
| skb_trim(skb, le16_to_cpu(hdr->len)); | |
| if (unlikely(priv->hw->conf.flags & IEEE80211_CONF_PS)) | |
| p54_pspoll_workaround(priv, skb); | |
| ieee80211_rx_irqsafe(priv->hw, skb); | |
| ieee80211_queue_delayed_work(priv->hw, &priv->work, | |
| msecs_to_jiffies(P54_STATISTICS_UPDATE)); | |
| return -1; | |
| } | |
| static void p54_rx_frame_sent(struct p54_common *priv, struct sk_buff *skb) | |
| { | |
| struct p54_hdr *hdr = (struct p54_hdr *) skb->data; | |
| struct p54_frame_sent *payload = (struct p54_frame_sent *) hdr->data; | |
| struct ieee80211_tx_info *info; | |
| struct p54_hdr *entry_hdr; | |
| struct p54_tx_data *entry_data; | |
| struct sk_buff *entry; | |
| unsigned int pad = 0, frame_len; | |
| int count, idx; | |
| entry = p54_find_and_unlink_skb(priv, hdr->req_id); | |
| if (unlikely(!entry)) | |
| return ; | |
| frame_len = entry->len; | |
| info = IEEE80211_SKB_CB(entry); | |
| entry_hdr = (struct p54_hdr *) entry->data; | |
| entry_data = (struct p54_tx_data *) entry_hdr->data; | |
| priv->stats.dot11ACKFailureCount += payload->tries - 1; | |
| /* | |
| * Frames in P54_QUEUE_FWSCAN and P54_QUEUE_BEACON are | |
| * generated by the driver. Therefore tx_status is bogus | |
| * and we don't want to confuse the mac80211 stack. | |
| */ | |
| if (unlikely(entry_data->hw_queue < P54_QUEUE_FWSCAN)) { | |
| dev_kfree_skb_any(entry); | |
| return ; | |
| } | |
| /* | |
| * Clear manually, ieee80211_tx_info_clear_status would | |
| * clear the counts too and we need them. | |
| */ | |
| memset(&info->status.ack_signal, 0, | |
| sizeof(struct ieee80211_tx_info) - | |
| offsetof(struct ieee80211_tx_info, status.ack_signal)); | |
| BUILD_BUG_ON(offsetof(struct ieee80211_tx_info, | |
| status.ack_signal) != 20); | |
| if (entry_hdr->flags & cpu_to_le16(P54_HDR_FLAG_DATA_ALIGN)) | |
| pad = entry_data->align[0]; | |
| /* walk through the rates array and adjust the counts */ | |
| count = payload->tries; | |
| for (idx = 0; idx < 4; idx++) { | |
| if (count >= info->status.rates[idx].count) { | |
| count -= info->status.rates[idx].count; | |
| } else if (count > 0) { | |
| info->status.rates[idx].count = count; | |
| count = 0; | |
| } else { | |
| info->status.rates[idx].idx = -1; | |
| info->status.rates[idx].count = 0; | |
| } | |
| } | |
| if (!(info->flags & IEEE80211_TX_CTL_NO_ACK) && | |
| !(payload->status & P54_TX_FAILED)) | |
| info->flags |= IEEE80211_TX_STAT_ACK; | |
| if (payload->status & P54_TX_PSM_CANCELLED) | |
| info->flags |= IEEE80211_TX_STAT_TX_FILTERED; | |
| info->status.ack_signal = p54_rssi_to_dbm(priv, | |
| (int)payload->ack_rssi); | |
| /* Undo all changes to the frame. */ | |
| switch (entry_data->key_type) { | |
| case P54_CRYPTO_TKIPMICHAEL: { | |
| u8 *iv = (u8 *)(entry_data->align + pad + | |
| entry_data->crypt_offset); | |
| /* Restore the original TKIP IV. */ | |
| iv[2] = iv[0]; | |
| iv[0] = iv[1]; | |
| iv[1] = (iv[0] | 0x20) & 0x7f; /* WEPSeed - 8.3.2.2 */ | |
| frame_len -= 12; /* remove TKIP_MMIC + TKIP_ICV */ | |
| break; | |
| } | |
| case P54_CRYPTO_AESCCMP: | |
| frame_len -= 8; /* remove CCMP_MIC */ | |
| break; | |
| case P54_CRYPTO_WEP: | |
| frame_len -= 4; /* remove WEP_ICV */ | |
| break; | |
| } | |
| skb_trim(entry, frame_len); | |
| skb_pull(entry, sizeof(*hdr) + pad + sizeof(*entry_data)); | |
| ieee80211_tx_status_irqsafe(priv->hw, entry); | |
| } | |
| static void p54_rx_eeprom_readback(struct p54_common *priv, | |
| struct sk_buff *skb) | |
| { | |
| struct p54_hdr *hdr = (struct p54_hdr *) skb->data; | |
| struct p54_eeprom_lm86 *eeprom = (struct p54_eeprom_lm86 *) hdr->data; | |
| struct sk_buff *tmp; | |
| if (!priv->eeprom) | |
| return ; | |
| if (priv->fw_var >= 0x509) { | |
| memcpy(priv->eeprom, eeprom->v2.data, | |
| le16_to_cpu(eeprom->v2.len)); | |
| } else { | |
| memcpy(priv->eeprom, eeprom->v1.data, | |
| le16_to_cpu(eeprom->v1.len)); | |
| } | |
| priv->eeprom = NULL; | |
| tmp = p54_find_and_unlink_skb(priv, hdr->req_id); | |
| dev_kfree_skb_any(tmp); | |
| complete(&priv->eeprom_comp); | |
| } | |
| static void p54_rx_stats(struct p54_common *priv, struct sk_buff *skb) | |
| { | |
| struct p54_hdr *hdr = (struct p54_hdr *) skb->data; | |
| struct p54_statistics *stats = (struct p54_statistics *) hdr->data; | |
| struct sk_buff *tmp; | |
| struct ieee80211_channel *chan; | |
| unsigned int i, rssi, tx, cca, dtime, dtotal, dcca, dtx, drssi, unit; | |
| u32 tsf32; | |
| if (unlikely(priv->mode == NL80211_IFTYPE_UNSPECIFIED)) | |
| return ; | |
| tsf32 = le32_to_cpu(stats->tsf32); | |
| if (tsf32 < priv->tsf_low32) | |
| priv->tsf_high32++; | |
| priv->tsf_low32 = tsf32; | |
| priv->stats.dot11RTSFailureCount = le32_to_cpu(stats->rts_fail); | |
| priv->stats.dot11RTSSuccessCount = le32_to_cpu(stats->rts_success); | |
| priv->stats.dot11FCSErrorCount = le32_to_cpu(stats->rx_bad_fcs); | |
| priv->noise = p54_rssi_to_dbm(priv, le32_to_cpu(stats->noise)); | |
| /* | |
| * STSW450X LMAC API page 26 - 3.8 Statistics | |
| * "The exact measurement period can be derived from the | |
| * timestamp member". | |
| */ | |
| dtime = tsf32 - priv->survey_raw.timestamp; | |
| /* | |
| * STSW450X LMAC API page 26 - 3.8.1 Noise histogram | |
| * The LMAC samples RSSI, CCA and transmit state at regular | |
| * periods (typically 8 times per 1k [as in 1024] usec). | |
| */ | |
| cca = le32_to_cpu(stats->sample_cca); | |
| tx = le32_to_cpu(stats->sample_tx); | |
| rssi = 0; | |
| for (i = 0; i < ARRAY_SIZE(stats->sample_noise); i++) | |
| rssi += le32_to_cpu(stats->sample_noise[i]); | |
| dcca = cca - priv->survey_raw.cached_cca; | |
| drssi = rssi - priv->survey_raw.cached_rssi; | |
| dtx = tx - priv->survey_raw.cached_tx; | |
| dtotal = dcca + drssi + dtx; | |
| /* | |
| * update statistics when more than a second is over since the | |
| * last call, or when a update is badly needed. | |
| */ | |
| if (dtotal && (priv->update_stats || dtime >= USEC_PER_SEC) && | |
| dtime >= dtotal) { | |
| priv->survey_raw.timestamp = tsf32; | |
| priv->update_stats = false; | |
| unit = dtime / dtotal; | |
| if (dcca) { | |
| priv->survey_raw.cca += dcca * unit; | |
| priv->survey_raw.cached_cca = cca; | |
| } | |
| if (dtx) { | |
| priv->survey_raw.tx += dtx * unit; | |
| priv->survey_raw.cached_tx = tx; | |
| } | |
| if (drssi) { | |
| priv->survey_raw.rssi += drssi * unit; | |
| priv->survey_raw.cached_rssi = rssi; | |
| } | |
| /* 1024 usec / 8 times = 128 usec / time */ | |
| if (!(priv->phy_ps || priv->phy_idle)) | |
| priv->survey_raw.active += dtotal * unit; | |
| else | |
| priv->survey_raw.active += (dcca + dtx) * unit; | |
| } | |
| chan = priv->curchan; | |
| if (chan) { | |
| struct survey_info *survey = &priv->survey[chan->hw_value]; | |
| survey->noise = clamp(priv->noise, -128, 127); | |
| survey->time = priv->survey_raw.active; | |
| survey->time_tx = priv->survey_raw.tx; | |
| survey->time_busy = priv->survey_raw.tx + | |
| priv->survey_raw.cca; | |
| do_div(survey->time, 1024); | |
| do_div(survey->time_tx, 1024); | |
| do_div(survey->time_busy, 1024); | |
| } | |
| tmp = p54_find_and_unlink_skb(priv, hdr->req_id); | |
| dev_kfree_skb_any(tmp); | |
| complete(&priv->stat_comp); | |
| } | |
| static void p54_rx_trap(struct p54_common *priv, struct sk_buff *skb) | |
| { | |
| struct p54_hdr *hdr = (struct p54_hdr *) skb->data; | |
| struct p54_trap *trap = (struct p54_trap *) hdr->data; | |
| u16 event = le16_to_cpu(trap->event); | |
| u16 freq = le16_to_cpu(trap->frequency); | |
| switch (event) { | |
| case P54_TRAP_BEACON_TX: | |
| break; | |
| case P54_TRAP_RADAR: | |
| wiphy_info(priv->hw->wiphy, "radar (freq:%d MHz)\n", freq); | |
| break; | |
| case P54_TRAP_NO_BEACON: | |
| if (priv->vif) | |
| ieee80211_beacon_loss(priv->vif); | |
| break; | |
| case P54_TRAP_SCAN: | |
| break; | |
| case P54_TRAP_TBTT: | |
| break; | |
| case P54_TRAP_TIMER: | |
| break; | |
| case P54_TRAP_FAA_RADIO_OFF: | |
| wiphy_rfkill_set_hw_state(priv->hw->wiphy, true); | |
| break; | |
| case P54_TRAP_FAA_RADIO_ON: | |
| wiphy_rfkill_set_hw_state(priv->hw->wiphy, false); | |
| break; | |
| default: | |
| wiphy_info(priv->hw->wiphy, "received event:%x freq:%d\n", | |
| event, freq); | |
| break; | |
| } | |
| } | |
| static int p54_rx_control(struct p54_common *priv, struct sk_buff *skb) | |
| { | |
| struct p54_hdr *hdr = (struct p54_hdr *) skb->data; | |
| switch (le16_to_cpu(hdr->type)) { | |
| case P54_CONTROL_TYPE_TXDONE: | |
| p54_rx_frame_sent(priv, skb); | |
| break; | |
| case P54_CONTROL_TYPE_TRAP: | |
| p54_rx_trap(priv, skb); | |
| break; | |
| case P54_CONTROL_TYPE_BBP: | |
| break; | |
| case P54_CONTROL_TYPE_STAT_READBACK: | |
| p54_rx_stats(priv, skb); | |
| break; | |
| case P54_CONTROL_TYPE_EEPROM_READBACK: | |
| p54_rx_eeprom_readback(priv, skb); | |
| break; | |
| default: | |
| wiphy_debug(priv->hw->wiphy, | |
| "not handling 0x%02x type control frame\n", | |
| le16_to_cpu(hdr->type)); | |
| break; | |
| } | |
| return 0; | |
| } | |
| /* returns zero if skb can be reused */ | |
| int p54_rx(struct ieee80211_hw *dev, struct sk_buff *skb) | |
| { | |
| struct p54_common *priv = dev->priv; | |
| u16 type = le16_to_cpu(*((__le16 *)skb->data)); | |
| if (type & P54_HDR_FLAG_CONTROL) | |
| return p54_rx_control(priv, skb); | |
| else | |
| return p54_rx_data(priv, skb); | |
| } | |
| EXPORT_SYMBOL_GPL(p54_rx); | |
| static void p54_tx_80211_header(struct p54_common *priv, struct sk_buff *skb, | |
| struct ieee80211_tx_info *info, | |
| struct ieee80211_sta *sta, | |
| u8 *queue, u32 *extra_len, u16 *flags, u16 *aid, | |
| bool *burst_possible) | |
| { | |
| struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data; | |
| if (ieee80211_is_data_qos(hdr->frame_control)) | |
| *burst_possible = true; | |
| else | |
| *burst_possible = false; | |
| if (!(info->flags & IEEE80211_TX_CTL_ASSIGN_SEQ)) | |
| *flags |= P54_HDR_FLAG_DATA_OUT_SEQNR; | |
| if (info->flags & IEEE80211_TX_CTL_NO_PS_BUFFER) | |
| *flags |= P54_HDR_FLAG_DATA_OUT_NOCANCEL; | |
| if (info->flags & IEEE80211_TX_CTL_CLEAR_PS_FILT) | |
| *flags |= P54_HDR_FLAG_DATA_OUT_NOCANCEL; | |
| *queue = skb_get_queue_mapping(skb) + P54_QUEUE_DATA; | |
| switch (priv->mode) { | |
| case NL80211_IFTYPE_MONITOR: | |
| /* | |
| * We have to set P54_HDR_FLAG_DATA_OUT_PROMISC for | |
| * every frame in promiscuous/monitor mode. | |
| * see STSW45x0C LMAC API - page 12. | |
| */ | |
| *aid = 0; | |
| *flags |= P54_HDR_FLAG_DATA_OUT_PROMISC; | |
| break; | |
| case NL80211_IFTYPE_STATION: | |
| *aid = 1; | |
| break; | |
| case NL80211_IFTYPE_AP: | |
| case NL80211_IFTYPE_ADHOC: | |
| case NL80211_IFTYPE_MESH_POINT: | |
| if (info->flags & IEEE80211_TX_CTL_SEND_AFTER_DTIM) { | |
| *aid = 0; | |
| *queue = P54_QUEUE_CAB; | |
| return; | |
| } | |
| if (unlikely(ieee80211_is_mgmt(hdr->frame_control))) { | |
| if (ieee80211_is_probe_resp(hdr->frame_control)) { | |
| *aid = 0; | |
| *flags |= P54_HDR_FLAG_DATA_OUT_TIMESTAMP | | |
| P54_HDR_FLAG_DATA_OUT_NOCANCEL; | |
| return; | |
| } else if (ieee80211_is_beacon(hdr->frame_control)) { | |
| *aid = 0; | |
| if (info->flags & IEEE80211_TX_CTL_INJECTED) { | |
| /* | |
| * Injecting beacons on top of a AP is | |
| * not a good idea... nevertheless, | |
| * it should be doable. | |
| */ | |
| return; | |
| } | |
| *flags |= P54_HDR_FLAG_DATA_OUT_TIMESTAMP; | |
| *queue = P54_QUEUE_BEACON; | |
| *extra_len = IEEE80211_MAX_TIM_LEN; | |
| return; | |
| } | |
| } | |
| if (sta) | |
| *aid = sta->aid; | |
| break; | |
| } | |
| } | |
| static u8 p54_convert_algo(u32 cipher) | |
| { | |
| switch (cipher) { | |
| case WLAN_CIPHER_SUITE_WEP40: | |
| case WLAN_CIPHER_SUITE_WEP104: | |
| return P54_CRYPTO_WEP; | |
| case WLAN_CIPHER_SUITE_TKIP: | |
| return P54_CRYPTO_TKIPMICHAEL; | |
| case WLAN_CIPHER_SUITE_CCMP: | |
| return P54_CRYPTO_AESCCMP; | |
| default: | |
| return 0; | |
| } | |
| } | |
| void p54_tx_80211(struct ieee80211_hw *dev, | |
| struct ieee80211_tx_control *control, | |
| struct sk_buff *skb) | |
| { | |
| struct p54_common *priv = dev->priv; | |
| struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); | |
| struct p54_tx_info *p54info; | |
| struct p54_hdr *hdr; | |
| struct p54_tx_data *txhdr; | |
| unsigned int padding, len, extra_len = 0; | |
| int i, j, ridx; | |
| u16 hdr_flags = 0, aid = 0; | |
| u8 rate, queue = 0, crypt_offset = 0; | |
| u8 cts_rate = 0x20; | |
| u8 rc_flags; | |
| u8 calculated_tries[4]; | |
| u8 nrates = 0, nremaining = 8; | |
| bool burst_allowed = false; | |
| p54_tx_80211_header(priv, skb, info, control->sta, &queue, &extra_len, | |
| &hdr_flags, &aid, &burst_allowed); | |
| if (p54_tx_qos_accounting_alloc(priv, skb, queue)) { | |
| ieee80211_free_txskb(dev, skb); | |
| return; | |
| } | |
| padding = (unsigned long)(skb->data - (sizeof(*hdr) + sizeof(*txhdr))) & 3; | |
| len = skb->len; | |
| if (info->control.hw_key) { | |
| crypt_offset = ieee80211_get_hdrlen_from_skb(skb); | |
| if (info->control.hw_key->cipher == WLAN_CIPHER_SUITE_TKIP) { | |
| u8 *iv = (u8 *)(skb->data + crypt_offset); | |
| /* | |
| * The firmware excepts that the IV has to have | |
| * this special format | |
| */ | |
| iv[1] = iv[0]; | |
| iv[0] = iv[2]; | |
| iv[2] = 0; | |
| } | |
| } | |
| txhdr = (struct p54_tx_data *) skb_push(skb, sizeof(*txhdr) + padding); | |
| hdr = (struct p54_hdr *) skb_push(skb, sizeof(*hdr)); | |
| if (padding) | |
| hdr_flags |= P54_HDR_FLAG_DATA_ALIGN; | |
| hdr->type = cpu_to_le16(aid); | |
| hdr->rts_tries = info->control.rates[0].count; | |
| /* | |
| * we register the rates in perfect order, and | |
| * RTS/CTS won't happen on 5 GHz | |
| */ | |
| cts_rate = info->control.rts_cts_rate_idx; | |
| memset(&txhdr->rateset, 0, sizeof(txhdr->rateset)); | |
| /* see how many rates got used */ | |
| for (i = 0; i < dev->max_rates; i++) { | |
| if (info->control.rates[i].idx < 0) | |
| break; | |
| nrates++; | |
| } | |
| /* limit tries to 8/nrates per rate */ | |
| for (i = 0; i < nrates; i++) { | |
| /* | |
| * The magic expression here is equivalent to 8/nrates for | |
| * all values that matter, but avoids division and jumps. | |
| * Note that nrates can only take the values 1 through 4. | |
| */ | |
| calculated_tries[i] = min_t(int, ((15 >> nrates) | 1) + 1, | |
| info->control.rates[i].count); | |
| nremaining -= calculated_tries[i]; | |
| } | |
| /* if there are tries left, distribute from back to front */ | |
| for (i = nrates - 1; nremaining > 0 && i >= 0; i--) { | |
| int tmp = info->control.rates[i].count - calculated_tries[i]; | |
| if (tmp <= 0) | |
| continue; | |
| /* RC requested more tries at this rate */ | |
| tmp = min_t(int, tmp, nremaining); | |
| calculated_tries[i] += tmp; | |
| nremaining -= tmp; | |
| } | |
| ridx = 0; | |
| for (i = 0; i < nrates && ridx < 8; i++) { | |
| /* we register the rates in perfect order */ | |
| rate = info->control.rates[i].idx; | |
| if (info->band == IEEE80211_BAND_5GHZ) | |
| rate += 4; | |
| /* store the count we actually calculated for TX status */ | |
| info->control.rates[i].count = calculated_tries[i]; | |
| rc_flags = info->control.rates[i].flags; | |
| if (rc_flags & IEEE80211_TX_RC_USE_SHORT_PREAMBLE) { | |
| rate |= 0x10; | |
| cts_rate |= 0x10; | |
| } | |
| if (rc_flags & IEEE80211_TX_RC_USE_RTS_CTS) { | |
| burst_allowed = false; | |
| rate |= 0x40; | |
| } else if (rc_flags & IEEE80211_TX_RC_USE_CTS_PROTECT) { | |
| rate |= 0x20; | |
| burst_allowed = false; | |
| } | |
| for (j = 0; j < calculated_tries[i] && ridx < 8; j++) { | |
| txhdr->rateset[ridx] = rate; | |
| ridx++; | |
| } | |
| } | |
| if (burst_allowed) | |
| hdr_flags |= P54_HDR_FLAG_DATA_OUT_BURST; | |
| /* TODO: enable bursting */ | |
| hdr->flags = cpu_to_le16(hdr_flags); | |
| hdr->tries = ridx; | |
| txhdr->rts_rate_idx = 0; | |
| if (info->control.hw_key) { | |
| txhdr->key_type = p54_convert_algo(info->control.hw_key->cipher); | |
| txhdr->key_len = min((u8)16, info->control.hw_key->keylen); | |
| memcpy(txhdr->key, info->control.hw_key->key, txhdr->key_len); | |
| if (info->control.hw_key->cipher == WLAN_CIPHER_SUITE_TKIP) { | |
| /* reserve space for the MIC key */ | |
| len += 8; | |
| memcpy(skb_put(skb, 8), &(info->control.hw_key->key | |
| [NL80211_TKIP_DATA_OFFSET_TX_MIC_KEY]), 8); | |
| } | |
| /* reserve some space for ICV */ | |
| len += info->control.hw_key->icv_len; | |
| memset(skb_put(skb, info->control.hw_key->icv_len), 0, | |
| info->control.hw_key->icv_len); | |
| } else { | |
| txhdr->key_type = 0; | |
| txhdr->key_len = 0; | |
| } | |
| txhdr->crypt_offset = crypt_offset; | |
| txhdr->hw_queue = queue; | |
| txhdr->backlog = priv->tx_stats[queue].len - 1; | |
| memset(txhdr->durations, 0, sizeof(txhdr->durations)); | |
| txhdr->tx_antenna = 2 & priv->tx_diversity_mask; | |
| if (priv->rxhw == 5) { | |
| txhdr->longbow.cts_rate = cts_rate; | |
| txhdr->longbow.output_power = cpu_to_le16(priv->output_power); | |
| } else { | |
| txhdr->normal.output_power = priv->output_power; | |
| txhdr->normal.cts_rate = cts_rate; | |
| } | |
| if (padding) | |
| txhdr->align[0] = padding; | |
| hdr->len = cpu_to_le16(len); | |
| /* modifies skb->cb and with it info, so must be last! */ | |
| p54info = (void *) info->rate_driver_data; | |
| p54info->extra_len = extra_len; | |
| p54_tx(priv, skb); | |
| } |