| /* Copyright (C) 2009 - 2010 Ivo van Doorn <IvDoorn@gmail.com> | |
| * Copyright (C) 2009 Alban Browaeys <prahal@yahoo.com> | |
| * Copyright (C) 2009 Felix Fietkau <nbd@openwrt.org> | |
| * Copyright (C) 2009 Luis Correia <luis.f.correia@gmail.com> | |
| * Copyright (C) 2009 Mattias Nissler <mattias.nissler@gmx.de> | |
| * Copyright (C) 2009 Mark Asselstine <asselsm@gmail.com> | |
| * Copyright (C) 2009 Xose Vazquez Perez <xose.vazquez@gmail.com> | |
| * Copyright (C) 2009 Bart Zolnierkiewicz <bzolnier@gmail.com> | |
| * <http://rt2x00.serialmonkey.com> | |
| * | |
| * This program is free software; you can redistribute it and/or modify | |
| * it under the terms of the GNU General Public License as published by | |
| * the Free Software Foundation; either version 2 of the License, or | |
| * (at your option) any later version. | |
| * | |
| * This program is distributed in the hope that it will be useful, | |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| * GNU General Public License for more details. | |
| * | |
| * You should have received a copy of the GNU General Public License | |
| * along with this program; if not, see <http://www.gnu.org/licenses/>. | |
| */ | |
| /* Module: rt2800soc | |
| * Abstract: rt2800 WiSoC specific routines. | |
| */ | |
| #include <linux/etherdevice.h> | |
| #include <linux/init.h> | |
| #include <linux/kernel.h> | |
| #include <linux/module.h> | |
| #include <linux/platform_device.h> | |
| #include "rt2x00.h" | |
| #include "rt2x00mmio.h" | |
| #include "rt2x00soc.h" | |
| #include "rt2800.h" | |
| #include "rt2800lib.h" | |
| #include "rt2800mmio.h" | |
| /* Allow hardware encryption to be disabled. */ | |
| static bool modparam_nohwcrypt; | |
| module_param_named(nohwcrypt, modparam_nohwcrypt, bool, S_IRUGO); | |
| MODULE_PARM_DESC(nohwcrypt, "Disable hardware encryption."); | |
| static bool rt2800soc_hwcrypt_disabled(struct rt2x00_dev *rt2x00dev) | |
| { | |
| return modparam_nohwcrypt; | |
| } | |
| static void rt2800soc_disable_radio(struct rt2x00_dev *rt2x00dev) | |
| { | |
| rt2800_disable_radio(rt2x00dev); | |
| rt2x00mmio_register_write(rt2x00dev, PWR_PIN_CFG, 0); | |
| rt2x00mmio_register_write(rt2x00dev, TX_PIN_CFG, 0); | |
| } | |
| static int rt2800soc_set_device_state(struct rt2x00_dev *rt2x00dev, | |
| enum dev_state state) | |
| { | |
| int retval = 0; | |
| switch (state) { | |
| case STATE_RADIO_ON: | |
| retval = rt2800mmio_enable_radio(rt2x00dev); | |
| break; | |
| case STATE_RADIO_OFF: | |
| rt2800soc_disable_radio(rt2x00dev); | |
| break; | |
| case STATE_RADIO_IRQ_ON: | |
| case STATE_RADIO_IRQ_OFF: | |
| rt2800mmio_toggle_irq(rt2x00dev, state); | |
| break; | |
| case STATE_DEEP_SLEEP: | |
| case STATE_SLEEP: | |
| case STATE_STANDBY: | |
| case STATE_AWAKE: | |
| /* These states are not supported, but don't report an error */ | |
| retval = 0; | |
| break; | |
| default: | |
| retval = -ENOTSUPP; | |
| break; | |
| } | |
| if (unlikely(retval)) | |
| rt2x00_err(rt2x00dev, "Device failed to enter state %d (%d)\n", | |
| state, retval); | |
| return retval; | |
| } | |
| static int rt2800soc_read_eeprom(struct rt2x00_dev *rt2x00dev) | |
| { | |
| void __iomem *base_addr = ioremap(0x1F040000, EEPROM_SIZE); | |
| if (!base_addr) | |
| return -ENOMEM; | |
| memcpy_fromio(rt2x00dev->eeprom, base_addr, EEPROM_SIZE); | |
| iounmap(base_addr); | |
| return 0; | |
| } | |
| /* Firmware functions */ | |
| static char *rt2800soc_get_firmware_name(struct rt2x00_dev *rt2x00dev) | |
| { | |
| WARN_ON_ONCE(1); | |
| return NULL; | |
| } | |
| static int rt2800soc_load_firmware(struct rt2x00_dev *rt2x00dev, | |
| const u8 *data, const size_t len) | |
| { | |
| WARN_ON_ONCE(1); | |
| return 0; | |
| } | |
| static int rt2800soc_check_firmware(struct rt2x00_dev *rt2x00dev, | |
| const u8 *data, const size_t len) | |
| { | |
| WARN_ON_ONCE(1); | |
| return 0; | |
| } | |
| static int rt2800soc_write_firmware(struct rt2x00_dev *rt2x00dev, | |
| const u8 *data, const size_t len) | |
| { | |
| WARN_ON_ONCE(1); | |
| return 0; | |
| } | |
| static const struct ieee80211_ops rt2800soc_mac80211_ops = { | |
| .tx = rt2x00mac_tx, | |
| .start = rt2x00mac_start, | |
| .stop = rt2x00mac_stop, | |
| .add_interface = rt2x00mac_add_interface, | |
| .remove_interface = rt2x00mac_remove_interface, | |
| .config = rt2x00mac_config, | |
| .configure_filter = rt2x00mac_configure_filter, | |
| .set_key = rt2x00mac_set_key, | |
| .sw_scan_start = rt2x00mac_sw_scan_start, | |
| .sw_scan_complete = rt2x00mac_sw_scan_complete, | |
| .get_stats = rt2x00mac_get_stats, | |
| .get_key_seq = rt2800_get_key_seq, | |
| .set_rts_threshold = rt2800_set_rts_threshold, | |
| .sta_add = rt2x00mac_sta_add, | |
| .sta_remove = rt2x00mac_sta_remove, | |
| .bss_info_changed = rt2x00mac_bss_info_changed, | |
| .conf_tx = rt2800_conf_tx, | |
| .get_tsf = rt2800_get_tsf, | |
| .rfkill_poll = rt2x00mac_rfkill_poll, | |
| .ampdu_action = rt2800_ampdu_action, | |
| .flush = rt2x00mac_flush, | |
| .get_survey = rt2800_get_survey, | |
| .get_ringparam = rt2x00mac_get_ringparam, | |
| .tx_frames_pending = rt2x00mac_tx_frames_pending, | |
| }; | |
| static const struct rt2800_ops rt2800soc_rt2800_ops = { | |
| .register_read = rt2x00mmio_register_read, | |
| .register_read_lock = rt2x00mmio_register_read, /* same for SoCs */ | |
| .register_write = rt2x00mmio_register_write, | |
| .register_write_lock = rt2x00mmio_register_write, /* same for SoCs */ | |
| .register_multiread = rt2x00mmio_register_multiread, | |
| .register_multiwrite = rt2x00mmio_register_multiwrite, | |
| .regbusy_read = rt2x00mmio_regbusy_read, | |
| .read_eeprom = rt2800soc_read_eeprom, | |
| .hwcrypt_disabled = rt2800soc_hwcrypt_disabled, | |
| .drv_write_firmware = rt2800soc_write_firmware, | |
| .drv_init_registers = rt2800mmio_init_registers, | |
| .drv_get_txwi = rt2800mmio_get_txwi, | |
| }; | |
| static const struct rt2x00lib_ops rt2800soc_rt2x00_ops = { | |
| .irq_handler = rt2800mmio_interrupt, | |
| .txstatus_tasklet = rt2800mmio_txstatus_tasklet, | |
| .pretbtt_tasklet = rt2800mmio_pretbtt_tasklet, | |
| .tbtt_tasklet = rt2800mmio_tbtt_tasklet, | |
| .rxdone_tasklet = rt2800mmio_rxdone_tasklet, | |
| .autowake_tasklet = rt2800mmio_autowake_tasklet, | |
| .probe_hw = rt2800_probe_hw, | |
| .get_firmware_name = rt2800soc_get_firmware_name, | |
| .check_firmware = rt2800soc_check_firmware, | |
| .load_firmware = rt2800soc_load_firmware, | |
| .initialize = rt2x00mmio_initialize, | |
| .uninitialize = rt2x00mmio_uninitialize, | |
| .get_entry_state = rt2800mmio_get_entry_state, | |
| .clear_entry = rt2800mmio_clear_entry, | |
| .set_device_state = rt2800soc_set_device_state, | |
| .rfkill_poll = rt2800_rfkill_poll, | |
| .link_stats = rt2800_link_stats, | |
| .reset_tuner = rt2800_reset_tuner, | |
| .link_tuner = rt2800_link_tuner, | |
| .gain_calibration = rt2800_gain_calibration, | |
| .vco_calibration = rt2800_vco_calibration, | |
| .start_queue = rt2800mmio_start_queue, | |
| .kick_queue = rt2800mmio_kick_queue, | |
| .stop_queue = rt2800mmio_stop_queue, | |
| .flush_queue = rt2x00mmio_flush_queue, | |
| .write_tx_desc = rt2800mmio_write_tx_desc, | |
| .write_tx_data = rt2800_write_tx_data, | |
| .write_beacon = rt2800_write_beacon, | |
| .clear_beacon = rt2800_clear_beacon, | |
| .fill_rxdone = rt2800mmio_fill_rxdone, | |
| .config_shared_key = rt2800_config_shared_key, | |
| .config_pairwise_key = rt2800_config_pairwise_key, | |
| .config_filter = rt2800_config_filter, | |
| .config_intf = rt2800_config_intf, | |
| .config_erp = rt2800_config_erp, | |
| .config_ant = rt2800_config_ant, | |
| .config = rt2800_config, | |
| .sta_add = rt2800_sta_add, | |
| .sta_remove = rt2800_sta_remove, | |
| }; | |
| static const struct rt2x00_ops rt2800soc_ops = { | |
| .name = KBUILD_MODNAME, | |
| .drv_data_size = sizeof(struct rt2800_drv_data), | |
| .max_ap_intf = 8, | |
| .eeprom_size = EEPROM_SIZE, | |
| .rf_size = RF_SIZE, | |
| .tx_queues = NUM_TX_QUEUES, | |
| .queue_init = rt2800mmio_queue_init, | |
| .lib = &rt2800soc_rt2x00_ops, | |
| .drv = &rt2800soc_rt2800_ops, | |
| .hw = &rt2800soc_mac80211_ops, | |
| #ifdef CONFIG_RT2X00_LIB_DEBUGFS | |
| .debugfs = &rt2800_rt2x00debug, | |
| #endif /* CONFIG_RT2X00_LIB_DEBUGFS */ | |
| }; | |
| static int rt2800soc_probe(struct platform_device *pdev) | |
| { | |
| return rt2x00soc_probe(pdev, &rt2800soc_ops); | |
| } | |
| static struct platform_driver rt2800soc_driver = { | |
| .driver = { | |
| .name = "rt2800_wmac", | |
| .mod_name = KBUILD_MODNAME, | |
| }, | |
| .probe = rt2800soc_probe, | |
| .remove = rt2x00soc_remove, | |
| .suspend = rt2x00soc_suspend, | |
| .resume = rt2x00soc_resume, | |
| }; | |
| module_platform_driver(rt2800soc_driver); | |
| MODULE_AUTHOR(DRV_PROJECT); | |
| MODULE_VERSION(DRV_VERSION); | |
| MODULE_DESCRIPTION("Ralink WiSoC Wireless LAN driver."); | |
| MODULE_LICENSE("GPL"); |