| /* ------------------------------------------------------------------------- | |
| * Copyright (C) 2014-2016, Intel Corporation | |
| * | |
| * This program is free software; you can redistribute it and/or modify | |
| * it under the terms of the GNU General Public License as published by | |
| * the Free Software Foundation; either version 2 of the License, or | |
| * (at your option) any later version. | |
| * | |
| * This program is distributed in the hope that it will be useful, | |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| * GNU General Public License for more details. | |
| * ------------------------------------------------------------------------- | |
| */ | |
| #include <linux/module.h> | |
| #include <linux/acpi.h> | |
| #include <linux/i2c.h> | |
| #include <linux/interrupt.h> | |
| #include <linux/nfc.h> | |
| #include <linux/delay.h> | |
| #include <linux/gpio/consumer.h> | |
| #include <net/nfc/nfc.h> | |
| #include <net/nfc/nci_core.h> | |
| #include "fdp.h" | |
| #define FDP_I2C_DRIVER_NAME "fdp_nci_i2c" | |
| #define FDP_DP_POWER_GPIO_NAME "power" | |
| #define FDP_DP_CLOCK_TYPE_NAME "clock-type" | |
| #define FDP_DP_CLOCK_FREQ_NAME "clock-freq" | |
| #define FDP_DP_FW_VSC_CFG_NAME "fw-vsc-cfg" | |
| #define FDP_FRAME_HEADROOM 2 | |
| #define FDP_FRAME_TAILROOM 1 | |
| #define FDP_NCI_I2C_MIN_PAYLOAD 5 | |
| #define FDP_NCI_I2C_MAX_PAYLOAD 261 | |
| #define FDP_POWER_OFF 0 | |
| #define FDP_POWER_ON 1 | |
| #define fdp_nci_i2c_dump_skb(dev, prefix, skb) \ | |
| print_hex_dump(KERN_DEBUG, prefix": ", DUMP_PREFIX_OFFSET, \ | |
| 16, 1, (skb)->data, (skb)->len, 0) | |
| static void fdp_nci_i2c_reset(struct fdp_i2c_phy *phy) | |
| { | |
| /* Reset RST/WakeUP for at least 100 micro-second */ | |
| gpiod_set_value_cansleep(phy->power_gpio, FDP_POWER_OFF); | |
| usleep_range(1000, 4000); | |
| gpiod_set_value_cansleep(phy->power_gpio, FDP_POWER_ON); | |
| usleep_range(10000, 14000); | |
| } | |
| static int fdp_nci_i2c_enable(void *phy_id) | |
| { | |
| struct fdp_i2c_phy *phy = phy_id; | |
| dev_dbg(&phy->i2c_dev->dev, "%s\n", __func__); | |
| fdp_nci_i2c_reset(phy); | |
| return 0; | |
| } | |
| static void fdp_nci_i2c_disable(void *phy_id) | |
| { | |
| struct fdp_i2c_phy *phy = phy_id; | |
| dev_dbg(&phy->i2c_dev->dev, "%s\n", __func__); | |
| fdp_nci_i2c_reset(phy); | |
| } | |
| static void fdp_nci_i2c_add_len_lrc(struct sk_buff *skb) | |
| { | |
| u8 lrc = 0; | |
| u16 len, i; | |
| /* Add length header */ | |
| len = skb->len; | |
| *skb_push(skb, 1) = len & 0xff; | |
| *skb_push(skb, 1) = len >> 8; | |
| /* Compute and add lrc */ | |
| for (i = 0; i < len + 2; i++) | |
| lrc ^= skb->data[i]; | |
| *skb_put(skb, 1) = lrc; | |
| } | |
| static void fdp_nci_i2c_remove_len_lrc(struct sk_buff *skb) | |
| { | |
| skb_pull(skb, FDP_FRAME_HEADROOM); | |
| skb_trim(skb, skb->len - FDP_FRAME_TAILROOM); | |
| } | |
| static int fdp_nci_i2c_write(void *phy_id, struct sk_buff *skb) | |
| { | |
| struct fdp_i2c_phy *phy = phy_id; | |
| struct i2c_client *client = phy->i2c_dev; | |
| int r; | |
| if (phy->hard_fault != 0) | |
| return phy->hard_fault; | |
| fdp_nci_i2c_add_len_lrc(skb); | |
| fdp_nci_i2c_dump_skb(&client->dev, "fdp_wr", skb); | |
| r = i2c_master_send(client, skb->data, skb->len); | |
| if (r == -EREMOTEIO) { /* Retry, chip was in standby */ | |
| usleep_range(1000, 4000); | |
| r = i2c_master_send(client, skb->data, skb->len); | |
| } | |
| if (r < 0 || r != skb->len) | |
| dev_dbg(&client->dev, "%s: error err=%d len=%d\n", | |
| __func__, r, skb->len); | |
| if (r >= 0) { | |
| if (r != skb->len) { | |
| phy->hard_fault = r; | |
| r = -EREMOTEIO; | |
| } else { | |
| r = 0; | |
| } | |
| } | |
| fdp_nci_i2c_remove_len_lrc(skb); | |
| return r; | |
| } | |
| static struct nfc_phy_ops i2c_phy_ops = { | |
| .write = fdp_nci_i2c_write, | |
| .enable = fdp_nci_i2c_enable, | |
| .disable = fdp_nci_i2c_disable, | |
| }; | |
| static int fdp_nci_i2c_read(struct fdp_i2c_phy *phy, struct sk_buff **skb) | |
| { | |
| int r, len; | |
| u8 tmp[FDP_NCI_I2C_MAX_PAYLOAD], lrc, k; | |
| u16 i; | |
| struct i2c_client *client = phy->i2c_dev; | |
| *skb = NULL; | |
| /* Read the length packet and the data packet */ | |
| for (k = 0; k < 2; k++) { | |
| len = phy->next_read_size; | |
| r = i2c_master_recv(client, tmp, len); | |
| if (r != len) { | |
| dev_dbg(&client->dev, "%s: i2c recv err: %d\n", | |
| __func__, r); | |
| goto flush; | |
| } | |
| /* Check packet integruty */ | |
| for (lrc = i = 0; i < r; i++) | |
| lrc ^= tmp[i]; | |
| /* | |
| * LRC check failed. This may due to transmission error or | |
| * desynchronization between driver and FDP. Drop the paquet | |
| * and force resynchronization | |
| */ | |
| if (lrc) { | |
| dev_dbg(&client->dev, "%s: corrupted packet\n", | |
| __func__); | |
| phy->next_read_size = 5; | |
| goto flush; | |
| } | |
| /* Packet that contains a length */ | |
| if (tmp[0] == 0 && tmp[1] == 0) { | |
| phy->next_read_size = (tmp[2] << 8) + tmp[3] + 3; | |
| } else { | |
| phy->next_read_size = FDP_NCI_I2C_MIN_PAYLOAD; | |
| *skb = alloc_skb(len, GFP_KERNEL); | |
| if (*skb == NULL) { | |
| r = -ENOMEM; | |
| goto flush; | |
| } | |
| memcpy(skb_put(*skb, len), tmp, len); | |
| fdp_nci_i2c_dump_skb(&client->dev, "fdp_rd", *skb); | |
| fdp_nci_i2c_remove_len_lrc(*skb); | |
| } | |
| } | |
| return 0; | |
| flush: | |
| /* Flush the remaining data */ | |
| if (i2c_master_recv(client, tmp, sizeof(tmp)) < 0) | |
| r = -EREMOTEIO; | |
| return r; | |
| } | |
| static irqreturn_t fdp_nci_i2c_irq_thread_fn(int irq, void *phy_id) | |
| { | |
| struct fdp_i2c_phy *phy = phy_id; | |
| struct i2c_client *client; | |
| struct sk_buff *skb; | |
| int r; | |
| client = phy->i2c_dev; | |
| dev_dbg(&client->dev, "%s\n", __func__); | |
| if (!phy || irq != phy->i2c_dev->irq) { | |
| WARN_ON_ONCE(1); | |
| return IRQ_NONE; | |
| } | |
| r = fdp_nci_i2c_read(phy, &skb); | |
| if (r == -EREMOTEIO) | |
| return IRQ_HANDLED; | |
| else if (r == -ENOMEM || r == -EBADMSG) | |
| return IRQ_HANDLED; | |
| if (skb != NULL) | |
| fdp_nci_recv_frame(phy->ndev, skb); | |
| return IRQ_HANDLED; | |
| } | |
| static void fdp_nci_i2c_read_device_properties(struct device *dev, | |
| u8 *clock_type, u32 *clock_freq, | |
| u8 **fw_vsc_cfg) | |
| { | |
| int r; | |
| u8 len; | |
| r = device_property_read_u8(dev, FDP_DP_CLOCK_TYPE_NAME, clock_type); | |
| if (r) { | |
| dev_dbg(dev, "Using default clock type"); | |
| *clock_type = 0; | |
| } | |
| r = device_property_read_u32(dev, FDP_DP_CLOCK_FREQ_NAME, clock_freq); | |
| if (r) { | |
| dev_dbg(dev, "Using default clock frequency\n"); | |
| *clock_freq = 26000; | |
| } | |
| if (device_property_present(dev, FDP_DP_FW_VSC_CFG_NAME)) { | |
| r = device_property_read_u8(dev, FDP_DP_FW_VSC_CFG_NAME, | |
| &len); | |
| if (r || len <= 0) | |
| goto vsc_read_err; | |
| /* Add 1 to the length to inclue the length byte itself */ | |
| len++; | |
| *fw_vsc_cfg = devm_kmalloc(dev, | |
| len * sizeof(**fw_vsc_cfg), | |
| GFP_KERNEL); | |
| r = device_property_read_u8_array(dev, FDP_DP_FW_VSC_CFG_NAME, | |
| *fw_vsc_cfg, len); | |
| if (r) { | |
| devm_kfree(dev, fw_vsc_cfg); | |
| goto vsc_read_err; | |
| } | |
| } else { | |
| vsc_read_err: | |
| dev_dbg(dev, "FW vendor specific commands not present\n"); | |
| *fw_vsc_cfg = NULL; | |
| } | |
| dev_dbg(dev, "Clock type: %d, clock frequency: %d, VSC: %s", | |
| *clock_type, *clock_freq, *fw_vsc_cfg != NULL ? "yes" : "no"); | |
| } | |
| static int fdp_nci_i2c_probe(struct i2c_client *client, | |
| const struct i2c_device_id *id) | |
| { | |
| struct fdp_i2c_phy *phy; | |
| struct device *dev = &client->dev; | |
| u8 *fw_vsc_cfg; | |
| u8 clock_type; | |
| u32 clock_freq; | |
| int r = 0; | |
| dev_dbg(dev, "%s\n", __func__); | |
| if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) { | |
| nfc_err(dev, "No I2C_FUNC_I2C support\n"); | |
| return -ENODEV; | |
| } | |
| phy = devm_kzalloc(dev, sizeof(struct fdp_i2c_phy), | |
| GFP_KERNEL); | |
| if (!phy) | |
| return -ENOMEM; | |
| phy->i2c_dev = client; | |
| phy->next_read_size = FDP_NCI_I2C_MIN_PAYLOAD; | |
| i2c_set_clientdata(client, phy); | |
| /* Checking if we have an irq */ | |
| if (client->irq <= 0) { | |
| dev_err(dev, "IRQ not present\n"); | |
| return -ENODEV; | |
| } | |
| r = request_threaded_irq(client->irq, NULL, fdp_nci_i2c_irq_thread_fn, | |
| IRQF_TRIGGER_RISING | IRQF_ONESHOT, | |
| FDP_I2C_DRIVER_NAME, phy); | |
| if (r < 0) { | |
| nfc_err(&client->dev, "Unable to register IRQ handler\n"); | |
| return r; | |
| } | |
| /* Requesting the power gpio */ | |
| phy->power_gpio = devm_gpiod_get(dev, FDP_DP_POWER_GPIO_NAME, | |
| GPIOD_OUT_LOW); | |
| if (IS_ERR(phy->power_gpio)) { | |
| nfc_err(dev, "Power GPIO request failed\n"); | |
| return PTR_ERR(phy->power_gpio); | |
| } | |
| /* read device properties to get the clock and production settings */ | |
| fdp_nci_i2c_read_device_properties(dev, &clock_type, &clock_freq, | |
| &fw_vsc_cfg); | |
| /* Call the NFC specific probe function */ | |
| r = fdp_nci_probe(phy, &i2c_phy_ops, &phy->ndev, | |
| FDP_FRAME_HEADROOM, FDP_FRAME_TAILROOM, | |
| clock_type, clock_freq, fw_vsc_cfg); | |
| if (r < 0) { | |
| nfc_err(dev, "NCI probing error\n"); | |
| return r; | |
| } | |
| dev_dbg(dev, "I2C driver loaded\n"); | |
| return 0; | |
| } | |
| static int fdp_nci_i2c_remove(struct i2c_client *client) | |
| { | |
| struct fdp_i2c_phy *phy = i2c_get_clientdata(client); | |
| dev_dbg(&client->dev, "%s\n", __func__); | |
| fdp_nci_remove(phy->ndev); | |
| fdp_nci_i2c_disable(phy); | |
| return 0; | |
| } | |
| static struct i2c_device_id fdp_nci_i2c_id_table[] = { | |
| {"int339a", 0}, | |
| {} | |
| }; | |
| MODULE_DEVICE_TABLE(i2c, fdp_nci_i2c_id_table); | |
| static const struct acpi_device_id fdp_nci_i2c_acpi_match[] = { | |
| {"INT339A", 0}, | |
| {} | |
| }; | |
| MODULE_DEVICE_TABLE(acpi, fdp_nci_i2c_acpi_match); | |
| static struct i2c_driver fdp_nci_i2c_driver = { | |
| .driver = { | |
| .name = FDP_I2C_DRIVER_NAME, | |
| .acpi_match_table = ACPI_PTR(fdp_nci_i2c_acpi_match), | |
| }, | |
| .id_table = fdp_nci_i2c_id_table, | |
| .probe = fdp_nci_i2c_probe, | |
| .remove = fdp_nci_i2c_remove, | |
| }; | |
| module_i2c_driver(fdp_nci_i2c_driver); | |
| MODULE_LICENSE("GPL"); | |
| MODULE_DESCRIPTION("I2C driver for Intel Fields Peak NFC controller"); | |
| MODULE_AUTHOR("Robert Dolca <robert.dolca@intel.com>"); |