| /* | |
| * Renesas USB driver | |
| * | |
| * Copyright (C) 2011 Renesas Solutions Corp. | |
| * Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> | |
| * | |
| * This program is distributed in the hope that it will be useful, | |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| * GNU General Public License for more details. | |
| * | |
| * You should have received a copy of the GNU General Public License | |
| * along with this program; if not, write to the Free Software | |
| * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA | |
| * | |
| */ | |
| #include <linux/delay.h> | |
| #include <linux/io.h> | |
| #include <linux/scatterlist.h> | |
| #include "common.h" | |
| #include "pipe.h" | |
| #define usbhsf_get_cfifo(p) (&((p)->fifo_info.cfifo)) | |
| #define usbhsf_is_cfifo(p, f) (usbhsf_get_cfifo(p) == f) | |
| #define usbhsf_fifo_is_busy(f) ((f)->pipe) /* see usbhs_pipe_select_fifo */ | |
| /* | |
| * packet initialize | |
| */ | |
| void usbhs_pkt_init(struct usbhs_pkt *pkt) | |
| { | |
| INIT_LIST_HEAD(&pkt->node); | |
| } | |
| /* | |
| * packet control function | |
| */ | |
| static int usbhsf_null_handle(struct usbhs_pkt *pkt, int *is_done) | |
| { | |
| struct usbhs_priv *priv = usbhs_pipe_to_priv(pkt->pipe); | |
| struct device *dev = usbhs_priv_to_dev(priv); | |
| dev_err(dev, "null handler\n"); | |
| return -EINVAL; | |
| } | |
| static struct usbhs_pkt_handle usbhsf_null_handler = { | |
| .prepare = usbhsf_null_handle, | |
| .try_run = usbhsf_null_handle, | |
| }; | |
| void usbhs_pkt_push(struct usbhs_pipe *pipe, struct usbhs_pkt *pkt, | |
| void (*done)(struct usbhs_priv *priv, | |
| struct usbhs_pkt *pkt), | |
| void *buf, int len, int zero, int sequence) | |
| { | |
| struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe); | |
| struct device *dev = usbhs_priv_to_dev(priv); | |
| unsigned long flags; | |
| if (!done) { | |
| dev_err(dev, "no done function\n"); | |
| return; | |
| } | |
| /******************** spin lock ********************/ | |
| usbhs_lock(priv, flags); | |
| if (!pipe->handler) { | |
| dev_err(dev, "no handler function\n"); | |
| pipe->handler = &usbhsf_null_handler; | |
| } | |
| list_move_tail(&pkt->node, &pipe->list); | |
| /* | |
| * each pkt must hold own handler. | |
| * because handler might be changed by its situation. | |
| * dma handler -> pio handler. | |
| */ | |
| pkt->pipe = pipe; | |
| pkt->buf = buf; | |
| pkt->handler = pipe->handler; | |
| pkt->length = len; | |
| pkt->zero = zero; | |
| pkt->actual = 0; | |
| pkt->done = done; | |
| pkt->sequence = sequence; | |
| usbhs_unlock(priv, flags); | |
| /******************** spin unlock ******************/ | |
| } | |
| static void __usbhsf_pkt_del(struct usbhs_pkt *pkt) | |
| { | |
| list_del_init(&pkt->node); | |
| } | |
| static struct usbhs_pkt *__usbhsf_pkt_get(struct usbhs_pipe *pipe) | |
| { | |
| if (list_empty(&pipe->list)) | |
| return NULL; | |
| return list_first_entry(&pipe->list, struct usbhs_pkt, node); | |
| } | |
| static void usbhsf_fifo_clear(struct usbhs_pipe *pipe, | |
| struct usbhs_fifo *fifo); | |
| static void usbhsf_fifo_unselect(struct usbhs_pipe *pipe, | |
| struct usbhs_fifo *fifo); | |
| static struct dma_chan *usbhsf_dma_chan_get(struct usbhs_fifo *fifo, | |
| struct usbhs_pkt *pkt); | |
| #define usbhsf_dma_map(p) __usbhsf_dma_map_ctrl(p, 1) | |
| #define usbhsf_dma_unmap(p) __usbhsf_dma_map_ctrl(p, 0) | |
| static int __usbhsf_dma_map_ctrl(struct usbhs_pkt *pkt, int map); | |
| struct usbhs_pkt *usbhs_pkt_pop(struct usbhs_pipe *pipe, struct usbhs_pkt *pkt) | |
| { | |
| struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe); | |
| struct usbhs_fifo *fifo = usbhs_pipe_to_fifo(pipe); | |
| unsigned long flags; | |
| /******************** spin lock ********************/ | |
| usbhs_lock(priv, flags); | |
| usbhs_pipe_disable(pipe); | |
| if (!pkt) | |
| pkt = __usbhsf_pkt_get(pipe); | |
| if (pkt) { | |
| struct dma_chan *chan = NULL; | |
| if (fifo) | |
| chan = usbhsf_dma_chan_get(fifo, pkt); | |
| if (chan) { | |
| dmaengine_terminate_all(chan); | |
| usbhsf_fifo_clear(pipe, fifo); | |
| usbhsf_dma_unmap(pkt); | |
| } | |
| __usbhsf_pkt_del(pkt); | |
| } | |
| if (fifo) | |
| usbhsf_fifo_unselect(pipe, fifo); | |
| usbhs_unlock(priv, flags); | |
| /******************** spin unlock ******************/ | |
| return pkt; | |
| } | |
| enum { | |
| USBHSF_PKT_PREPARE, | |
| USBHSF_PKT_TRY_RUN, | |
| USBHSF_PKT_DMA_DONE, | |
| }; | |
| static int usbhsf_pkt_handler(struct usbhs_pipe *pipe, int type) | |
| { | |
| struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe); | |
| struct usbhs_pkt *pkt; | |
| struct device *dev = usbhs_priv_to_dev(priv); | |
| int (*func)(struct usbhs_pkt *pkt, int *is_done); | |
| unsigned long flags; | |
| int ret = 0; | |
| int is_done = 0; | |
| /******************** spin lock ********************/ | |
| usbhs_lock(priv, flags); | |
| pkt = __usbhsf_pkt_get(pipe); | |
| if (!pkt) | |
| goto __usbhs_pkt_handler_end; | |
| switch (type) { | |
| case USBHSF_PKT_PREPARE: | |
| func = pkt->handler->prepare; | |
| break; | |
| case USBHSF_PKT_TRY_RUN: | |
| func = pkt->handler->try_run; | |
| break; | |
| case USBHSF_PKT_DMA_DONE: | |
| func = pkt->handler->dma_done; | |
| break; | |
| default: | |
| dev_err(dev, "unknown pkt handler\n"); | |
| goto __usbhs_pkt_handler_end; | |
| } | |
| ret = func(pkt, &is_done); | |
| if (is_done) | |
| __usbhsf_pkt_del(pkt); | |
| __usbhs_pkt_handler_end: | |
| usbhs_unlock(priv, flags); | |
| /******************** spin unlock ******************/ | |
| if (is_done) { | |
| pkt->done(priv, pkt); | |
| usbhs_pkt_start(pipe); | |
| } | |
| return ret; | |
| } | |
| void usbhs_pkt_start(struct usbhs_pipe *pipe) | |
| { | |
| usbhsf_pkt_handler(pipe, USBHSF_PKT_PREPARE); | |
| } | |
| /* | |
| * irq enable/disable function | |
| */ | |
| #define usbhsf_irq_empty_ctrl(p, e) usbhsf_irq_callback_ctrl(p, irq_bempsts, e) | |
| #define usbhsf_irq_ready_ctrl(p, e) usbhsf_irq_callback_ctrl(p, irq_brdysts, e) | |
| #define usbhsf_irq_callback_ctrl(pipe, status, enable) \ | |
| ({ \ | |
| struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe); \ | |
| struct usbhs_mod *mod = usbhs_mod_get_current(priv); \ | |
| u16 status = (1 << usbhs_pipe_number(pipe)); \ | |
| if (!mod) \ | |
| return; \ | |
| if (enable) \ | |
| mod->status |= status; \ | |
| else \ | |
| mod->status &= ~status; \ | |
| usbhs_irq_callback_update(priv, mod); \ | |
| }) | |
| static void usbhsf_tx_irq_ctrl(struct usbhs_pipe *pipe, int enable) | |
| { | |
| /* | |
| * And DCP pipe can NOT use "ready interrupt" for "send" | |
| * it should use "empty" interrupt. | |
| * see | |
| * "Operation" - "Interrupt Function" - "BRDY Interrupt" | |
| * | |
| * on the other hand, normal pipe can use "ready interrupt" for "send" | |
| * even though it is single/double buffer | |
| */ | |
| if (usbhs_pipe_is_dcp(pipe)) | |
| usbhsf_irq_empty_ctrl(pipe, enable); | |
| else | |
| usbhsf_irq_ready_ctrl(pipe, enable); | |
| } | |
| static void usbhsf_rx_irq_ctrl(struct usbhs_pipe *pipe, int enable) | |
| { | |
| usbhsf_irq_ready_ctrl(pipe, enable); | |
| } | |
| /* | |
| * FIFO ctrl | |
| */ | |
| static void usbhsf_send_terminator(struct usbhs_pipe *pipe, | |
| struct usbhs_fifo *fifo) | |
| { | |
| struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe); | |
| usbhs_bset(priv, fifo->ctr, BVAL, BVAL); | |
| } | |
| static int usbhsf_fifo_barrier(struct usbhs_priv *priv, | |
| struct usbhs_fifo *fifo) | |
| { | |
| int timeout = 1024; | |
| do { | |
| /* The FIFO port is accessible */ | |
| if (usbhs_read(priv, fifo->ctr) & FRDY) | |
| return 0; | |
| udelay(10); | |
| } while (timeout--); | |
| return -EBUSY; | |
| } | |
| static void usbhsf_fifo_clear(struct usbhs_pipe *pipe, | |
| struct usbhs_fifo *fifo) | |
| { | |
| struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe); | |
| if (!usbhs_pipe_is_dcp(pipe)) | |
| usbhsf_fifo_barrier(priv, fifo); | |
| usbhs_write(priv, fifo->ctr, BCLR); | |
| } | |
| static int usbhsf_fifo_rcv_len(struct usbhs_priv *priv, | |
| struct usbhs_fifo *fifo) | |
| { | |
| return usbhs_read(priv, fifo->ctr) & DTLN_MASK; | |
| } | |
| static void usbhsf_fifo_unselect(struct usbhs_pipe *pipe, | |
| struct usbhs_fifo *fifo) | |
| { | |
| struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe); | |
| usbhs_pipe_select_fifo(pipe, NULL); | |
| usbhs_write(priv, fifo->sel, 0); | |
| } | |
| static int usbhsf_fifo_select(struct usbhs_pipe *pipe, | |
| struct usbhs_fifo *fifo, | |
| int write) | |
| { | |
| struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe); | |
| struct device *dev = usbhs_priv_to_dev(priv); | |
| int timeout = 1024; | |
| u16 mask = ((1 << 5) | 0xF); /* mask of ISEL | CURPIPE */ | |
| u16 base = usbhs_pipe_number(pipe); /* CURPIPE */ | |
| if (usbhs_pipe_is_busy(pipe) || | |
| usbhsf_fifo_is_busy(fifo)) | |
| return -EBUSY; | |
| if (usbhs_pipe_is_dcp(pipe)) { | |
| base |= (1 == write) << 5; /* ISEL */ | |
| if (usbhs_mod_is_host(priv)) | |
| usbhs_dcp_dir_for_host(pipe, write); | |
| } | |
| /* "base" will be used below */ | |
| if (usbhs_get_dparam(priv, has_sudmac) && !usbhsf_is_cfifo(priv, fifo)) | |
| usbhs_write(priv, fifo->sel, base); | |
| else | |
| usbhs_write(priv, fifo->sel, base | MBW_32); | |
| /* check ISEL and CURPIPE value */ | |
| while (timeout--) { | |
| if (base == (mask & usbhs_read(priv, fifo->sel))) { | |
| usbhs_pipe_select_fifo(pipe, fifo); | |
| return 0; | |
| } | |
| udelay(10); | |
| } | |
| dev_err(dev, "fifo select error\n"); | |
| return -EIO; | |
| } | |
| /* | |
| * DCP status stage | |
| */ | |
| static int usbhs_dcp_dir_switch_to_write(struct usbhs_pkt *pkt, int *is_done) | |
| { | |
| struct usbhs_pipe *pipe = pkt->pipe; | |
| struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe); | |
| struct usbhs_fifo *fifo = usbhsf_get_cfifo(priv); /* CFIFO */ | |
| struct device *dev = usbhs_priv_to_dev(priv); | |
| int ret; | |
| usbhs_pipe_disable(pipe); | |
| ret = usbhsf_fifo_select(pipe, fifo, 1); | |
| if (ret < 0) { | |
| dev_err(dev, "%s() faile\n", __func__); | |
| return ret; | |
| } | |
| usbhs_pipe_sequence_data1(pipe); /* DATA1 */ | |
| usbhsf_fifo_clear(pipe, fifo); | |
| usbhsf_send_terminator(pipe, fifo); | |
| usbhsf_fifo_unselect(pipe, fifo); | |
| usbhsf_tx_irq_ctrl(pipe, 1); | |
| usbhs_pipe_enable(pipe); | |
| return ret; | |
| } | |
| static int usbhs_dcp_dir_switch_to_read(struct usbhs_pkt *pkt, int *is_done) | |
| { | |
| struct usbhs_pipe *pipe = pkt->pipe; | |
| struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe); | |
| struct usbhs_fifo *fifo = usbhsf_get_cfifo(priv); /* CFIFO */ | |
| struct device *dev = usbhs_priv_to_dev(priv); | |
| int ret; | |
| usbhs_pipe_disable(pipe); | |
| ret = usbhsf_fifo_select(pipe, fifo, 0); | |
| if (ret < 0) { | |
| dev_err(dev, "%s() fail\n", __func__); | |
| return ret; | |
| } | |
| usbhs_pipe_sequence_data1(pipe); /* DATA1 */ | |
| usbhsf_fifo_clear(pipe, fifo); | |
| usbhsf_fifo_unselect(pipe, fifo); | |
| usbhsf_rx_irq_ctrl(pipe, 1); | |
| usbhs_pipe_enable(pipe); | |
| return ret; | |
| } | |
| static int usbhs_dcp_dir_switch_done(struct usbhs_pkt *pkt, int *is_done) | |
| { | |
| struct usbhs_pipe *pipe = pkt->pipe; | |
| if (pkt->handler == &usbhs_dcp_status_stage_in_handler) | |
| usbhsf_tx_irq_ctrl(pipe, 0); | |
| else | |
| usbhsf_rx_irq_ctrl(pipe, 0); | |
| pkt->actual = pkt->length; | |
| *is_done = 1; | |
| return 0; | |
| } | |
| struct usbhs_pkt_handle usbhs_dcp_status_stage_in_handler = { | |
| .prepare = usbhs_dcp_dir_switch_to_write, | |
| .try_run = usbhs_dcp_dir_switch_done, | |
| }; | |
| struct usbhs_pkt_handle usbhs_dcp_status_stage_out_handler = { | |
| .prepare = usbhs_dcp_dir_switch_to_read, | |
| .try_run = usbhs_dcp_dir_switch_done, | |
| }; | |
| /* | |
| * DCP data stage (push) | |
| */ | |
| static int usbhsf_dcp_data_stage_try_push(struct usbhs_pkt *pkt, int *is_done) | |
| { | |
| struct usbhs_pipe *pipe = pkt->pipe; | |
| usbhs_pipe_sequence_data1(pipe); /* DATA1 */ | |
| /* | |
| * change handler to PIO push | |
| */ | |
| pkt->handler = &usbhs_fifo_pio_push_handler; | |
| return pkt->handler->prepare(pkt, is_done); | |
| } | |
| struct usbhs_pkt_handle usbhs_dcp_data_stage_out_handler = { | |
| .prepare = usbhsf_dcp_data_stage_try_push, | |
| }; | |
| /* | |
| * DCP data stage (pop) | |
| */ | |
| static int usbhsf_dcp_data_stage_prepare_pop(struct usbhs_pkt *pkt, | |
| int *is_done) | |
| { | |
| struct usbhs_pipe *pipe = pkt->pipe; | |
| struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe); | |
| struct usbhs_fifo *fifo = usbhsf_get_cfifo(priv); | |
| if (usbhs_pipe_is_busy(pipe)) | |
| return 0; | |
| /* | |
| * prepare pop for DCP should | |
| * - change DCP direction, | |
| * - clear fifo | |
| * - DATA1 | |
| */ | |
| usbhs_pipe_disable(pipe); | |
| usbhs_pipe_sequence_data1(pipe); /* DATA1 */ | |
| usbhsf_fifo_select(pipe, fifo, 0); | |
| usbhsf_fifo_clear(pipe, fifo); | |
| usbhsf_fifo_unselect(pipe, fifo); | |
| /* | |
| * change handler to PIO pop | |
| */ | |
| pkt->handler = &usbhs_fifo_pio_pop_handler; | |
| return pkt->handler->prepare(pkt, is_done); | |
| } | |
| struct usbhs_pkt_handle usbhs_dcp_data_stage_in_handler = { | |
| .prepare = usbhsf_dcp_data_stage_prepare_pop, | |
| }; | |
| /* | |
| * PIO push handler | |
| */ | |
| static int usbhsf_pio_try_push(struct usbhs_pkt *pkt, int *is_done) | |
| { | |
| struct usbhs_pipe *pipe = pkt->pipe; | |
| struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe); | |
| struct device *dev = usbhs_priv_to_dev(priv); | |
| struct usbhs_fifo *fifo = usbhsf_get_cfifo(priv); /* CFIFO */ | |
| void __iomem *addr = priv->base + fifo->port; | |
| u8 *buf; | |
| int maxp = usbhs_pipe_get_maxpacket(pipe); | |
| int total_len; | |
| int i, ret, len; | |
| int is_short; | |
| usbhs_pipe_data_sequence(pipe, pkt->sequence); | |
| pkt->sequence = -1; /* -1 sequence will be ignored */ | |
| usbhs_pipe_set_trans_count_if_bulk(pipe, pkt->length); | |
| ret = usbhsf_fifo_select(pipe, fifo, 1); | |
| if (ret < 0) | |
| return 0; | |
| ret = usbhs_pipe_is_accessible(pipe); | |
| if (ret < 0) { | |
| /* inaccessible pipe is not an error */ | |
| ret = 0; | |
| goto usbhs_fifo_write_busy; | |
| } | |
| ret = usbhsf_fifo_barrier(priv, fifo); | |
| if (ret < 0) | |
| goto usbhs_fifo_write_busy; | |
| buf = pkt->buf + pkt->actual; | |
| len = pkt->length - pkt->actual; | |
| len = min(len, maxp); | |
| total_len = len; | |
| is_short = total_len < maxp; | |
| /* | |
| * FIXME | |
| * | |
| * 32-bit access only | |
| */ | |
| if (len >= 4 && !((unsigned long)buf & 0x03)) { | |
| iowrite32_rep(addr, buf, len / 4); | |
| len %= 4; | |
| buf += total_len - len; | |
| } | |
| /* the rest operation */ | |
| for (i = 0; i < len; i++) | |
| iowrite8(buf[i], addr + (0x03 - (i & 0x03))); | |
| /* | |
| * variable update | |
| */ | |
| pkt->actual += total_len; | |
| if (pkt->actual < pkt->length) | |
| *is_done = 0; /* there are remainder data */ | |
| else if (is_short) | |
| *is_done = 1; /* short packet */ | |
| else | |
| *is_done = !pkt->zero; /* send zero packet ? */ | |
| /* | |
| * pipe/irq handling | |
| */ | |
| if (is_short) | |
| usbhsf_send_terminator(pipe, fifo); | |
| usbhsf_tx_irq_ctrl(pipe, !*is_done); | |
| usbhs_pipe_running(pipe, !*is_done); | |
| usbhs_pipe_enable(pipe); | |
| dev_dbg(dev, " send %d (%d/ %d/ %d/ %d)\n", | |
| usbhs_pipe_number(pipe), | |
| pkt->length, pkt->actual, *is_done, pkt->zero); | |
| usbhsf_fifo_unselect(pipe, fifo); | |
| return 0; | |
| usbhs_fifo_write_busy: | |
| usbhsf_fifo_unselect(pipe, fifo); | |
| /* | |
| * pipe is busy. | |
| * retry in interrupt | |
| */ | |
| usbhsf_tx_irq_ctrl(pipe, 1); | |
| usbhs_pipe_running(pipe, 1); | |
| return ret; | |
| } | |
| static int usbhsf_pio_prepare_push(struct usbhs_pkt *pkt, int *is_done) | |
| { | |
| if (usbhs_pipe_is_running(pkt->pipe)) | |
| return 0; | |
| return usbhsf_pio_try_push(pkt, is_done); | |
| } | |
| struct usbhs_pkt_handle usbhs_fifo_pio_push_handler = { | |
| .prepare = usbhsf_pio_prepare_push, | |
| .try_run = usbhsf_pio_try_push, | |
| }; | |
| /* | |
| * PIO pop handler | |
| */ | |
| static int usbhsf_prepare_pop(struct usbhs_pkt *pkt, int *is_done) | |
| { | |
| struct usbhs_pipe *pipe = pkt->pipe; | |
| struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe); | |
| struct usbhs_fifo *fifo = usbhsf_get_cfifo(priv); | |
| if (usbhs_pipe_is_busy(pipe)) | |
| return 0; | |
| if (usbhs_pipe_is_running(pipe)) | |
| return 0; | |
| /* | |
| * pipe enable to prepare packet receive | |
| */ | |
| usbhs_pipe_data_sequence(pipe, pkt->sequence); | |
| pkt->sequence = -1; /* -1 sequence will be ignored */ | |
| if (usbhs_pipe_is_dcp(pipe)) | |
| usbhsf_fifo_clear(pipe, fifo); | |
| usbhs_pipe_set_trans_count_if_bulk(pipe, pkt->length); | |
| usbhs_pipe_enable(pipe); | |
| usbhs_pipe_running(pipe, 1); | |
| usbhsf_rx_irq_ctrl(pipe, 1); | |
| return 0; | |
| } | |
| static int usbhsf_pio_try_pop(struct usbhs_pkt *pkt, int *is_done) | |
| { | |
| struct usbhs_pipe *pipe = pkt->pipe; | |
| struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe); | |
| struct device *dev = usbhs_priv_to_dev(priv); | |
| struct usbhs_fifo *fifo = usbhsf_get_cfifo(priv); /* CFIFO */ | |
| void __iomem *addr = priv->base + fifo->port; | |
| u8 *buf; | |
| u32 data = 0; | |
| int maxp = usbhs_pipe_get_maxpacket(pipe); | |
| int rcv_len, len; | |
| int i, ret; | |
| int total_len = 0; | |
| ret = usbhsf_fifo_select(pipe, fifo, 0); | |
| if (ret < 0) | |
| return 0; | |
| ret = usbhsf_fifo_barrier(priv, fifo); | |
| if (ret < 0) | |
| goto usbhs_fifo_read_busy; | |
| rcv_len = usbhsf_fifo_rcv_len(priv, fifo); | |
| buf = pkt->buf + pkt->actual; | |
| len = pkt->length - pkt->actual; | |
| len = min(len, rcv_len); | |
| total_len = len; | |
| /* | |
| * update actual length first here to decide disable pipe. | |
| * if this pipe keeps BUF status and all data were popped, | |
| * then, next interrupt/token will be issued again | |
| */ | |
| pkt->actual += total_len; | |
| if ((pkt->actual == pkt->length) || /* receive all data */ | |
| (total_len < maxp)) { /* short packet */ | |
| *is_done = 1; | |
| usbhsf_rx_irq_ctrl(pipe, 0); | |
| usbhs_pipe_running(pipe, 0); | |
| /* | |
| * If function mode, since this controller is possible to enter | |
| * Control Write status stage at this timing, this driver | |
| * should not disable the pipe. If such a case happens, this | |
| * controller is not able to complete the status stage. | |
| */ | |
| if (!usbhs_mod_is_host(priv) && !usbhs_pipe_is_dcp(pipe)) | |
| usbhs_pipe_disable(pipe); /* disable pipe first */ | |
| } | |
| /* | |
| * Buffer clear if Zero-Length packet | |
| * | |
| * see | |
| * "Operation" - "FIFO Buffer Memory" - "FIFO Port Function" | |
| */ | |
| if (0 == rcv_len) { | |
| pkt->zero = 1; | |
| usbhsf_fifo_clear(pipe, fifo); | |
| goto usbhs_fifo_read_end; | |
| } | |
| /* | |
| * FIXME | |
| * | |
| * 32-bit access only | |
| */ | |
| if (len >= 4 && !((unsigned long)buf & 0x03)) { | |
| ioread32_rep(addr, buf, len / 4); | |
| len %= 4; | |
| buf += total_len - len; | |
| } | |
| /* the rest operation */ | |
| for (i = 0; i < len; i++) { | |
| if (!(i & 0x03)) | |
| data = ioread32(addr); | |
| buf[i] = (data >> ((i & 0x03) * 8)) & 0xff; | |
| } | |
| usbhs_fifo_read_end: | |
| dev_dbg(dev, " recv %d (%d/ %d/ %d/ %d)\n", | |
| usbhs_pipe_number(pipe), | |
| pkt->length, pkt->actual, *is_done, pkt->zero); | |
| usbhs_fifo_read_busy: | |
| usbhsf_fifo_unselect(pipe, fifo); | |
| return ret; | |
| } | |
| struct usbhs_pkt_handle usbhs_fifo_pio_pop_handler = { | |
| .prepare = usbhsf_prepare_pop, | |
| .try_run = usbhsf_pio_try_pop, | |
| }; | |
| /* | |
| * DCP ctrol statge handler | |
| */ | |
| static int usbhsf_ctrl_stage_end(struct usbhs_pkt *pkt, int *is_done) | |
| { | |
| usbhs_dcp_control_transfer_done(pkt->pipe); | |
| *is_done = 1; | |
| return 0; | |
| } | |
| struct usbhs_pkt_handle usbhs_ctrl_stage_end_handler = { | |
| .prepare = usbhsf_ctrl_stage_end, | |
| .try_run = usbhsf_ctrl_stage_end, | |
| }; | |
| /* | |
| * DMA fifo functions | |
| */ | |
| static struct dma_chan *usbhsf_dma_chan_get(struct usbhs_fifo *fifo, | |
| struct usbhs_pkt *pkt) | |
| { | |
| if (&usbhs_fifo_dma_push_handler == pkt->handler) | |
| return fifo->tx_chan; | |
| if (&usbhs_fifo_dma_pop_handler == pkt->handler) | |
| return fifo->rx_chan; | |
| return NULL; | |
| } | |
| static struct usbhs_fifo *usbhsf_get_dma_fifo(struct usbhs_priv *priv, | |
| struct usbhs_pkt *pkt) | |
| { | |
| struct usbhs_fifo *fifo; | |
| int i; | |
| usbhs_for_each_dfifo(priv, fifo, i) { | |
| if (usbhsf_dma_chan_get(fifo, pkt) && | |
| !usbhsf_fifo_is_busy(fifo)) | |
| return fifo; | |
| } | |
| return NULL; | |
| } | |
| #define usbhsf_dma_start(p, f) __usbhsf_dma_ctrl(p, f, DREQE) | |
| #define usbhsf_dma_stop(p, f) __usbhsf_dma_ctrl(p, f, 0) | |
| static void __usbhsf_dma_ctrl(struct usbhs_pipe *pipe, | |
| struct usbhs_fifo *fifo, | |
| u16 dreqe) | |
| { | |
| struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe); | |
| usbhs_bset(priv, fifo->sel, DREQE, dreqe); | |
| } | |
| static int __usbhsf_dma_map_ctrl(struct usbhs_pkt *pkt, int map) | |
| { | |
| struct usbhs_pipe *pipe = pkt->pipe; | |
| struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe); | |
| struct usbhs_pipe_info *info = usbhs_priv_to_pipeinfo(priv); | |
| return info->dma_map_ctrl(pkt, map); | |
| } | |
| static void usbhsf_dma_complete(void *arg); | |
| static void xfer_work(struct work_struct *work) | |
| { | |
| struct usbhs_pkt *pkt = container_of(work, struct usbhs_pkt, work); | |
| struct usbhs_pipe *pipe = pkt->pipe; | |
| struct usbhs_fifo *fifo = usbhs_pipe_to_fifo(pipe); | |
| struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe); | |
| struct dma_async_tx_descriptor *desc; | |
| struct dma_chan *chan = usbhsf_dma_chan_get(fifo, pkt); | |
| struct device *dev = usbhs_priv_to_dev(priv); | |
| enum dma_transfer_direction dir; | |
| dir = usbhs_pipe_is_dir_in(pipe) ? DMA_DEV_TO_MEM : DMA_MEM_TO_DEV; | |
| desc = dmaengine_prep_slave_single(chan, pkt->dma + pkt->actual, | |
| pkt->trans, dir, | |
| DMA_PREP_INTERRUPT | DMA_CTRL_ACK); | |
| if (!desc) | |
| return; | |
| desc->callback = usbhsf_dma_complete; | |
| desc->callback_param = pipe; | |
| pkt->cookie = dmaengine_submit(desc); | |
| if (pkt->cookie < 0) { | |
| dev_err(dev, "Failed to submit dma descriptor\n"); | |
| return; | |
| } | |
| dev_dbg(dev, " %s %d (%d/ %d)\n", | |
| fifo->name, usbhs_pipe_number(pipe), pkt->length, pkt->zero); | |
| usbhs_pipe_running(pipe, 1); | |
| usbhsf_dma_start(pipe, fifo); | |
| usbhs_pipe_set_trans_count_if_bulk(pipe, pkt->trans); | |
| dma_async_issue_pending(chan); | |
| usbhs_pipe_enable(pipe); | |
| } | |
| /* | |
| * DMA push handler | |
| */ | |
| static int usbhsf_dma_prepare_push(struct usbhs_pkt *pkt, int *is_done) | |
| { | |
| struct usbhs_pipe *pipe = pkt->pipe; | |
| struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe); | |
| struct usbhs_fifo *fifo; | |
| int len = pkt->length - pkt->actual; | |
| int ret; | |
| uintptr_t align_mask; | |
| if (usbhs_pipe_is_busy(pipe)) | |
| return 0; | |
| /* use PIO if packet is less than pio_dma_border or pipe is DCP */ | |
| if ((len < usbhs_get_dparam(priv, pio_dma_border)) || | |
| usbhs_pipe_is_dcp(pipe)) | |
| goto usbhsf_pio_prepare_push; | |
| /* check data length if this driver don't use USB-DMAC */ | |
| if (!usbhs_get_dparam(priv, has_usb_dmac) && len & 0x7) | |
| goto usbhsf_pio_prepare_push; | |
| /* check buffer alignment */ | |
| align_mask = usbhs_get_dparam(priv, has_usb_dmac) ? | |
| USBHS_USB_DMAC_XFER_SIZE - 1 : 0x7; | |
| if ((uintptr_t)(pkt->buf + pkt->actual) & align_mask) | |
| goto usbhsf_pio_prepare_push; | |
| /* return at this time if the pipe is running */ | |
| if (usbhs_pipe_is_running(pipe)) | |
| return 0; | |
| /* get enable DMA fifo */ | |
| fifo = usbhsf_get_dma_fifo(priv, pkt); | |
| if (!fifo) | |
| goto usbhsf_pio_prepare_push; | |
| if (usbhsf_dma_map(pkt) < 0) | |
| goto usbhsf_pio_prepare_push; | |
| ret = usbhsf_fifo_select(pipe, fifo, 0); | |
| if (ret < 0) | |
| goto usbhsf_pio_prepare_push_unmap; | |
| pkt->trans = len; | |
| INIT_WORK(&pkt->work, xfer_work); | |
| schedule_work(&pkt->work); | |
| return 0; | |
| usbhsf_pio_prepare_push_unmap: | |
| usbhsf_dma_unmap(pkt); | |
| usbhsf_pio_prepare_push: | |
| /* | |
| * change handler to PIO | |
| */ | |
| pkt->handler = &usbhs_fifo_pio_push_handler; | |
| return pkt->handler->prepare(pkt, is_done); | |
| } | |
| static int usbhsf_dma_push_done(struct usbhs_pkt *pkt, int *is_done) | |
| { | |
| struct usbhs_pipe *pipe = pkt->pipe; | |
| int is_short = pkt->trans % usbhs_pipe_get_maxpacket(pipe); | |
| pkt->actual += pkt->trans; | |
| if (pkt->actual < pkt->length) | |
| *is_done = 0; /* there are remainder data */ | |
| else if (is_short) | |
| *is_done = 1; /* short packet */ | |
| else | |
| *is_done = !pkt->zero; /* send zero packet? */ | |
| usbhs_pipe_running(pipe, !*is_done); | |
| usbhsf_dma_stop(pipe, pipe->fifo); | |
| usbhsf_dma_unmap(pkt); | |
| usbhsf_fifo_unselect(pipe, pipe->fifo); | |
| if (!*is_done) { | |
| /* change handler to PIO */ | |
| pkt->handler = &usbhs_fifo_pio_push_handler; | |
| return pkt->handler->try_run(pkt, is_done); | |
| } | |
| return 0; | |
| } | |
| struct usbhs_pkt_handle usbhs_fifo_dma_push_handler = { | |
| .prepare = usbhsf_dma_prepare_push, | |
| .dma_done = usbhsf_dma_push_done, | |
| }; | |
| /* | |
| * DMA pop handler | |
| */ | |
| static int usbhsf_dma_prepare_pop_with_rx_irq(struct usbhs_pkt *pkt, | |
| int *is_done) | |
| { | |
| return usbhsf_prepare_pop(pkt, is_done); | |
| } | |
| static int usbhsf_dma_prepare_pop_with_usb_dmac(struct usbhs_pkt *pkt, | |
| int *is_done) | |
| { | |
| struct usbhs_pipe *pipe = pkt->pipe; | |
| struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe); | |
| struct usbhs_fifo *fifo; | |
| int ret; | |
| if (usbhs_pipe_is_busy(pipe)) | |
| return 0; | |
| /* use PIO if packet is less than pio_dma_border or pipe is DCP */ | |
| if ((pkt->length < usbhs_get_dparam(priv, pio_dma_border)) || | |
| usbhs_pipe_is_dcp(pipe)) | |
| goto usbhsf_pio_prepare_pop; | |
| fifo = usbhsf_get_dma_fifo(priv, pkt); | |
| if (!fifo) | |
| goto usbhsf_pio_prepare_pop; | |
| if ((uintptr_t)pkt->buf & (USBHS_USB_DMAC_XFER_SIZE - 1)) | |
| goto usbhsf_pio_prepare_pop; | |
| usbhs_pipe_config_change_bfre(pipe, 1); | |
| ret = usbhsf_fifo_select(pipe, fifo, 0); | |
| if (ret < 0) | |
| goto usbhsf_pio_prepare_pop; | |
| if (usbhsf_dma_map(pkt) < 0) | |
| goto usbhsf_pio_prepare_pop_unselect; | |
| /* DMA */ | |
| /* | |
| * usbhs_fifo_dma_pop_handler :: prepare | |
| * enabled irq to come here. | |
| * but it is no longer needed for DMA. disable it. | |
| */ | |
| usbhsf_rx_irq_ctrl(pipe, 0); | |
| pkt->trans = pkt->length; | |
| INIT_WORK(&pkt->work, xfer_work); | |
| schedule_work(&pkt->work); | |
| return 0; | |
| usbhsf_pio_prepare_pop_unselect: | |
| usbhsf_fifo_unselect(pipe, fifo); | |
| usbhsf_pio_prepare_pop: | |
| /* | |
| * change handler to PIO | |
| */ | |
| pkt->handler = &usbhs_fifo_pio_pop_handler; | |
| usbhs_pipe_config_change_bfre(pipe, 0); | |
| return pkt->handler->prepare(pkt, is_done); | |
| } | |
| static int usbhsf_dma_prepare_pop(struct usbhs_pkt *pkt, int *is_done) | |
| { | |
| struct usbhs_priv *priv = usbhs_pipe_to_priv(pkt->pipe); | |
| if (usbhs_get_dparam(priv, has_usb_dmac)) | |
| return usbhsf_dma_prepare_pop_with_usb_dmac(pkt, is_done); | |
| else | |
| return usbhsf_dma_prepare_pop_with_rx_irq(pkt, is_done); | |
| } | |
| static int usbhsf_dma_try_pop_with_rx_irq(struct usbhs_pkt *pkt, int *is_done) | |
| { | |
| struct usbhs_pipe *pipe = pkt->pipe; | |
| struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe); | |
| struct usbhs_fifo *fifo; | |
| int len, ret; | |
| if (usbhs_pipe_is_busy(pipe)) | |
| return 0; | |
| if (usbhs_pipe_is_dcp(pipe)) | |
| goto usbhsf_pio_prepare_pop; | |
| /* get enable DMA fifo */ | |
| fifo = usbhsf_get_dma_fifo(priv, pkt); | |
| if (!fifo) | |
| goto usbhsf_pio_prepare_pop; | |
| if ((uintptr_t)(pkt->buf + pkt->actual) & 0x7) /* 8byte alignment */ | |
| goto usbhsf_pio_prepare_pop; | |
| ret = usbhsf_fifo_select(pipe, fifo, 0); | |
| if (ret < 0) | |
| goto usbhsf_pio_prepare_pop; | |
| /* use PIO if packet is less than pio_dma_border */ | |
| len = usbhsf_fifo_rcv_len(priv, fifo); | |
| len = min(pkt->length - pkt->actual, len); | |
| if (len & 0x7) /* 8byte alignment */ | |
| goto usbhsf_pio_prepare_pop_unselect; | |
| if (len < usbhs_get_dparam(priv, pio_dma_border)) | |
| goto usbhsf_pio_prepare_pop_unselect; | |
| ret = usbhsf_fifo_barrier(priv, fifo); | |
| if (ret < 0) | |
| goto usbhsf_pio_prepare_pop_unselect; | |
| if (usbhsf_dma_map(pkt) < 0) | |
| goto usbhsf_pio_prepare_pop_unselect; | |
| /* DMA */ | |
| /* | |
| * usbhs_fifo_dma_pop_handler :: prepare | |
| * enabled irq to come here. | |
| * but it is no longer needed for DMA. disable it. | |
| */ | |
| usbhsf_rx_irq_ctrl(pipe, 0); | |
| pkt->trans = len; | |
| INIT_WORK(&pkt->work, xfer_work); | |
| schedule_work(&pkt->work); | |
| return 0; | |
| usbhsf_pio_prepare_pop_unselect: | |
| usbhsf_fifo_unselect(pipe, fifo); | |
| usbhsf_pio_prepare_pop: | |
| /* | |
| * change handler to PIO | |
| */ | |
| pkt->handler = &usbhs_fifo_pio_pop_handler; | |
| return pkt->handler->try_run(pkt, is_done); | |
| } | |
| static int usbhsf_dma_try_pop(struct usbhs_pkt *pkt, int *is_done) | |
| { | |
| struct usbhs_priv *priv = usbhs_pipe_to_priv(pkt->pipe); | |
| BUG_ON(usbhs_get_dparam(priv, has_usb_dmac)); | |
| return usbhsf_dma_try_pop_with_rx_irq(pkt, is_done); | |
| } | |
| static int usbhsf_dma_pop_done_with_rx_irq(struct usbhs_pkt *pkt, int *is_done) | |
| { | |
| struct usbhs_pipe *pipe = pkt->pipe; | |
| int maxp = usbhs_pipe_get_maxpacket(pipe); | |
| usbhsf_dma_stop(pipe, pipe->fifo); | |
| usbhsf_dma_unmap(pkt); | |
| usbhsf_fifo_unselect(pipe, pipe->fifo); | |
| pkt->actual += pkt->trans; | |
| if ((pkt->actual == pkt->length) || /* receive all data */ | |
| (pkt->trans < maxp)) { /* short packet */ | |
| *is_done = 1; | |
| usbhs_pipe_running(pipe, 0); | |
| } else { | |
| /* re-enable */ | |
| usbhs_pipe_running(pipe, 0); | |
| usbhsf_prepare_pop(pkt, is_done); | |
| } | |
| return 0; | |
| } | |
| static size_t usbhs_dma_calc_received_size(struct usbhs_pkt *pkt, | |
| struct dma_chan *chan, int dtln) | |
| { | |
| struct usbhs_pipe *pipe = pkt->pipe; | |
| struct dma_tx_state state; | |
| size_t received_size; | |
| int maxp = usbhs_pipe_get_maxpacket(pipe); | |
| dmaengine_tx_status(chan, pkt->cookie, &state); | |
| received_size = pkt->length - state.residue; | |
| if (dtln) { | |
| received_size -= USBHS_USB_DMAC_XFER_SIZE; | |
| received_size &= ~(maxp - 1); | |
| received_size += dtln; | |
| } | |
| return received_size; | |
| } | |
| static int usbhsf_dma_pop_done_with_usb_dmac(struct usbhs_pkt *pkt, | |
| int *is_done) | |
| { | |
| struct usbhs_pipe *pipe = pkt->pipe; | |
| struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe); | |
| struct usbhs_fifo *fifo = usbhs_pipe_to_fifo(pipe); | |
| struct dma_chan *chan = usbhsf_dma_chan_get(fifo, pkt); | |
| int rcv_len; | |
| /* | |
| * Since the driver disables rx_irq in DMA mode, the interrupt handler | |
| * cannot the BRDYSTS. So, the function clears it here because the | |
| * driver may use PIO mode next time. | |
| */ | |
| usbhs_xxxsts_clear(priv, BRDYSTS, usbhs_pipe_number(pipe)); | |
| rcv_len = usbhsf_fifo_rcv_len(priv, fifo); | |
| usbhsf_fifo_clear(pipe, fifo); | |
| pkt->actual = usbhs_dma_calc_received_size(pkt, chan, rcv_len); | |
| usbhsf_dma_stop(pipe, fifo); | |
| usbhsf_dma_unmap(pkt); | |
| usbhsf_fifo_unselect(pipe, pipe->fifo); | |
| /* The driver can assume the rx transaction is always "done" */ | |
| *is_done = 1; | |
| return 0; | |
| } | |
| static int usbhsf_dma_pop_done(struct usbhs_pkt *pkt, int *is_done) | |
| { | |
| struct usbhs_priv *priv = usbhs_pipe_to_priv(pkt->pipe); | |
| if (usbhs_get_dparam(priv, has_usb_dmac)) | |
| return usbhsf_dma_pop_done_with_usb_dmac(pkt, is_done); | |
| else | |
| return usbhsf_dma_pop_done_with_rx_irq(pkt, is_done); | |
| } | |
| struct usbhs_pkt_handle usbhs_fifo_dma_pop_handler = { | |
| .prepare = usbhsf_dma_prepare_pop, | |
| .try_run = usbhsf_dma_try_pop, | |
| .dma_done = usbhsf_dma_pop_done | |
| }; | |
| /* | |
| * DMA setting | |
| */ | |
| static bool usbhsf_dma_filter(struct dma_chan *chan, void *param) | |
| { | |
| struct sh_dmae_slave *slave = param; | |
| /* | |
| * FIXME | |
| * | |
| * usbhs doesn't recognize id = 0 as valid DMA | |
| */ | |
| if (0 == slave->shdma_slave.slave_id) | |
| return false; | |
| chan->private = slave; | |
| return true; | |
| } | |
| static void usbhsf_dma_quit(struct usbhs_priv *priv, struct usbhs_fifo *fifo) | |
| { | |
| if (fifo->tx_chan) | |
| dma_release_channel(fifo->tx_chan); | |
| if (fifo->rx_chan) | |
| dma_release_channel(fifo->rx_chan); | |
| fifo->tx_chan = NULL; | |
| fifo->rx_chan = NULL; | |
| } | |
| static void usbhsf_dma_init_pdev(struct usbhs_fifo *fifo) | |
| { | |
| dma_cap_mask_t mask; | |
| dma_cap_zero(mask); | |
| dma_cap_set(DMA_SLAVE, mask); | |
| fifo->tx_chan = dma_request_channel(mask, usbhsf_dma_filter, | |
| &fifo->tx_slave); | |
| dma_cap_zero(mask); | |
| dma_cap_set(DMA_SLAVE, mask); | |
| fifo->rx_chan = dma_request_channel(mask, usbhsf_dma_filter, | |
| &fifo->rx_slave); | |
| } | |
| static void usbhsf_dma_init_dt(struct device *dev, struct usbhs_fifo *fifo, | |
| int channel) | |
| { | |
| char name[16]; | |
| /* | |
| * To avoid complex handing for DnFIFOs, the driver uses each | |
| * DnFIFO as TX or RX direction (not bi-direction). | |
| * So, the driver uses odd channels for TX, even channels for RX. | |
| */ | |
| snprintf(name, sizeof(name), "ch%d", channel); | |
| if (channel & 1) { | |
| fifo->tx_chan = dma_request_slave_channel_reason(dev, name); | |
| if (IS_ERR(fifo->tx_chan)) | |
| fifo->tx_chan = NULL; | |
| } else { | |
| fifo->rx_chan = dma_request_slave_channel_reason(dev, name); | |
| if (IS_ERR(fifo->rx_chan)) | |
| fifo->rx_chan = NULL; | |
| } | |
| } | |
| static void usbhsf_dma_init(struct usbhs_priv *priv, struct usbhs_fifo *fifo, | |
| int channel) | |
| { | |
| struct device *dev = usbhs_priv_to_dev(priv); | |
| if (dev->of_node) | |
| usbhsf_dma_init_dt(dev, fifo, channel); | |
| else | |
| usbhsf_dma_init_pdev(fifo); | |
| if (fifo->tx_chan || fifo->rx_chan) | |
| dev_dbg(dev, "enable DMAEngine (%s%s%s)\n", | |
| fifo->name, | |
| fifo->tx_chan ? "[TX]" : " ", | |
| fifo->rx_chan ? "[RX]" : " "); | |
| } | |
| /* | |
| * irq functions | |
| */ | |
| static int usbhsf_irq_empty(struct usbhs_priv *priv, | |
| struct usbhs_irq_state *irq_state) | |
| { | |
| struct usbhs_pipe *pipe; | |
| struct device *dev = usbhs_priv_to_dev(priv); | |
| int i, ret; | |
| if (!irq_state->bempsts) { | |
| dev_err(dev, "debug %s !!\n", __func__); | |
| return -EIO; | |
| } | |
| dev_dbg(dev, "irq empty [0x%04x]\n", irq_state->bempsts); | |
| /* | |
| * search interrupted "pipe" | |
| * not "uep". | |
| */ | |
| usbhs_for_each_pipe_with_dcp(pipe, priv, i) { | |
| if (!(irq_state->bempsts & (1 << i))) | |
| continue; | |
| ret = usbhsf_pkt_handler(pipe, USBHSF_PKT_TRY_RUN); | |
| if (ret < 0) | |
| dev_err(dev, "irq_empty run_error %d : %d\n", i, ret); | |
| } | |
| return 0; | |
| } | |
| static int usbhsf_irq_ready(struct usbhs_priv *priv, | |
| struct usbhs_irq_state *irq_state) | |
| { | |
| struct usbhs_pipe *pipe; | |
| struct device *dev = usbhs_priv_to_dev(priv); | |
| int i, ret; | |
| if (!irq_state->brdysts) { | |
| dev_err(dev, "debug %s !!\n", __func__); | |
| return -EIO; | |
| } | |
| dev_dbg(dev, "irq ready [0x%04x]\n", irq_state->brdysts); | |
| /* | |
| * search interrupted "pipe" | |
| * not "uep". | |
| */ | |
| usbhs_for_each_pipe_with_dcp(pipe, priv, i) { | |
| if (!(irq_state->brdysts & (1 << i))) | |
| continue; | |
| ret = usbhsf_pkt_handler(pipe, USBHSF_PKT_TRY_RUN); | |
| if (ret < 0) | |
| dev_err(dev, "irq_ready run_error %d : %d\n", i, ret); | |
| } | |
| return 0; | |
| } | |
| static void usbhsf_dma_complete(void *arg) | |
| { | |
| struct usbhs_pipe *pipe = arg; | |
| struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe); | |
| struct device *dev = usbhs_priv_to_dev(priv); | |
| int ret; | |
| ret = usbhsf_pkt_handler(pipe, USBHSF_PKT_DMA_DONE); | |
| if (ret < 0) | |
| dev_err(dev, "dma_complete run_error %d : %d\n", | |
| usbhs_pipe_number(pipe), ret); | |
| } | |
| void usbhs_fifo_clear_dcp(struct usbhs_pipe *pipe) | |
| { | |
| struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe); | |
| struct usbhs_fifo *fifo = usbhsf_get_cfifo(priv); /* CFIFO */ | |
| /* clear DCP FIFO of transmission */ | |
| if (usbhsf_fifo_select(pipe, fifo, 1) < 0) | |
| return; | |
| usbhsf_fifo_clear(pipe, fifo); | |
| usbhsf_fifo_unselect(pipe, fifo); | |
| /* clear DCP FIFO of reception */ | |
| if (usbhsf_fifo_select(pipe, fifo, 0) < 0) | |
| return; | |
| usbhsf_fifo_clear(pipe, fifo); | |
| usbhsf_fifo_unselect(pipe, fifo); | |
| } | |
| /* | |
| * fifo init | |
| */ | |
| void usbhs_fifo_init(struct usbhs_priv *priv) | |
| { | |
| struct usbhs_mod *mod = usbhs_mod_get_current(priv); | |
| struct usbhs_fifo *cfifo = usbhsf_get_cfifo(priv); | |
| struct usbhs_fifo *dfifo; | |
| int i; | |
| mod->irq_empty = usbhsf_irq_empty; | |
| mod->irq_ready = usbhsf_irq_ready; | |
| mod->irq_bempsts = 0; | |
| mod->irq_brdysts = 0; | |
| cfifo->pipe = NULL; | |
| usbhs_for_each_dfifo(priv, dfifo, i) | |
| dfifo->pipe = NULL; | |
| } | |
| void usbhs_fifo_quit(struct usbhs_priv *priv) | |
| { | |
| struct usbhs_mod *mod = usbhs_mod_get_current(priv); | |
| mod->irq_empty = NULL; | |
| mod->irq_ready = NULL; | |
| mod->irq_bempsts = 0; | |
| mod->irq_brdysts = 0; | |
| } | |
| #define __USBHS_DFIFO_INIT(priv, fifo, channel, fifo_port) \ | |
| do { \ | |
| fifo = usbhsf_get_dnfifo(priv, channel); \ | |
| fifo->name = "D"#channel"FIFO"; \ | |
| fifo->port = fifo_port; \ | |
| fifo->sel = D##channel##FIFOSEL; \ | |
| fifo->ctr = D##channel##FIFOCTR; \ | |
| fifo->tx_slave.shdma_slave.slave_id = \ | |
| usbhs_get_dparam(priv, d##channel##_tx_id); \ | |
| fifo->rx_slave.shdma_slave.slave_id = \ | |
| usbhs_get_dparam(priv, d##channel##_rx_id); \ | |
| usbhsf_dma_init(priv, fifo, channel); \ | |
| } while (0) | |
| #define USBHS_DFIFO_INIT(priv, fifo, channel) \ | |
| __USBHS_DFIFO_INIT(priv, fifo, channel, D##channel##FIFO) | |
| #define USBHS_DFIFO_INIT_NO_PORT(priv, fifo, channel) \ | |
| __USBHS_DFIFO_INIT(priv, fifo, channel, 0) | |
| int usbhs_fifo_probe(struct usbhs_priv *priv) | |
| { | |
| struct usbhs_fifo *fifo; | |
| /* CFIFO */ | |
| fifo = usbhsf_get_cfifo(priv); | |
| fifo->name = "CFIFO"; | |
| fifo->port = CFIFO; | |
| fifo->sel = CFIFOSEL; | |
| fifo->ctr = CFIFOCTR; | |
| /* DFIFO */ | |
| USBHS_DFIFO_INIT(priv, fifo, 0); | |
| USBHS_DFIFO_INIT(priv, fifo, 1); | |
| USBHS_DFIFO_INIT_NO_PORT(priv, fifo, 2); | |
| USBHS_DFIFO_INIT_NO_PORT(priv, fifo, 3); | |
| return 0; | |
| } | |
| void usbhs_fifo_remove(struct usbhs_priv *priv) | |
| { | |
| struct usbhs_fifo *fifo; | |
| int i; | |
| usbhs_for_each_dfifo(priv, fifo, i) | |
| usbhsf_dma_quit(priv, fifo); | |
| } |