| /* | |
| * Renesas USB driver | |
| * | |
| * Copyright (C) 2011 Renesas Solutions Corp. | |
| * Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> | |
| * | |
| * This program is distributed in the hope that it will be useful, | |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| * GNU General Public License for more details. | |
| * | |
| * You should have received a copy of the GNU General Public License | |
| * along with this program; if not, write to the Free Software | |
| * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA | |
| * | |
| */ | |
| #include <linux/delay.h> | |
| #include <linux/dma-mapping.h> | |
| #include <linux/io.h> | |
| #include <linux/module.h> | |
| #include <linux/platform_device.h> | |
| #include <linux/usb/ch9.h> | |
| #include <linux/usb/gadget.h> | |
| #include <linux/usb/otg.h> | |
| #include "common.h" | |
| /* | |
| * struct | |
| */ | |
| struct usbhsg_request { | |
| struct usb_request req; | |
| struct usbhs_pkt pkt; | |
| }; | |
| #define EP_NAME_SIZE 8 | |
| struct usbhsg_gpriv; | |
| struct usbhsg_uep { | |
| struct usb_ep ep; | |
| struct usbhs_pipe *pipe; | |
| char ep_name[EP_NAME_SIZE]; | |
| struct usbhsg_gpriv *gpriv; | |
| }; | |
| struct usbhsg_gpriv { | |
| struct usb_gadget gadget; | |
| struct usbhs_mod mod; | |
| struct usbhsg_uep *uep; | |
| int uep_size; | |
| struct usb_gadget_driver *driver; | |
| struct usb_phy *transceiver; | |
| bool vbus_active; | |
| u32 status; | |
| #define USBHSG_STATUS_STARTED (1 << 0) | |
| #define USBHSG_STATUS_REGISTERD (1 << 1) | |
| #define USBHSG_STATUS_WEDGE (1 << 2) | |
| #define USBHSG_STATUS_SELF_POWERED (1 << 3) | |
| #define USBHSG_STATUS_SOFT_CONNECT (1 << 4) | |
| }; | |
| struct usbhsg_recip_handle { | |
| char *name; | |
| int (*device)(struct usbhs_priv *priv, struct usbhsg_uep *uep, | |
| struct usb_ctrlrequest *ctrl); | |
| int (*interface)(struct usbhs_priv *priv, struct usbhsg_uep *uep, | |
| struct usb_ctrlrequest *ctrl); | |
| int (*endpoint)(struct usbhs_priv *priv, struct usbhsg_uep *uep, | |
| struct usb_ctrlrequest *ctrl); | |
| }; | |
| /* | |
| * macro | |
| */ | |
| #define usbhsg_priv_to_gpriv(priv) \ | |
| container_of( \ | |
| usbhs_mod_get(priv, USBHS_GADGET), \ | |
| struct usbhsg_gpriv, mod) | |
| #define __usbhsg_for_each_uep(start, pos, g, i) \ | |
| for ((i) = start; \ | |
| ((i) < (g)->uep_size) && ((pos) = (g)->uep + (i)); \ | |
| (i)++) | |
| #define usbhsg_for_each_uep(pos, gpriv, i) \ | |
| __usbhsg_for_each_uep(1, pos, gpriv, i) | |
| #define usbhsg_for_each_uep_with_dcp(pos, gpriv, i) \ | |
| __usbhsg_for_each_uep(0, pos, gpriv, i) | |
| #define usbhsg_gadget_to_gpriv(g)\ | |
| container_of(g, struct usbhsg_gpriv, gadget) | |
| #define usbhsg_req_to_ureq(r)\ | |
| container_of(r, struct usbhsg_request, req) | |
| #define usbhsg_ep_to_uep(e) container_of(e, struct usbhsg_uep, ep) | |
| #define usbhsg_gpriv_to_dev(gp) usbhs_priv_to_dev((gp)->mod.priv) | |
| #define usbhsg_gpriv_to_priv(gp) ((gp)->mod.priv) | |
| #define usbhsg_gpriv_to_dcp(gp) ((gp)->uep) | |
| #define usbhsg_gpriv_to_nth_uep(gp, i) ((gp)->uep + i) | |
| #define usbhsg_uep_to_gpriv(u) ((u)->gpriv) | |
| #define usbhsg_uep_to_pipe(u) ((u)->pipe) | |
| #define usbhsg_pipe_to_uep(p) ((p)->mod_private) | |
| #define usbhsg_is_dcp(u) ((u) == usbhsg_gpriv_to_dcp((u)->gpriv)) | |
| #define usbhsg_ureq_to_pkt(u) (&(u)->pkt) | |
| #define usbhsg_pkt_to_ureq(i) \ | |
| container_of(i, struct usbhsg_request, pkt) | |
| #define usbhsg_is_not_connected(gp) ((gp)->gadget.speed == USB_SPEED_UNKNOWN) | |
| /* status */ | |
| #define usbhsg_status_init(gp) do {(gp)->status = 0; } while (0) | |
| #define usbhsg_status_set(gp, b) (gp->status |= b) | |
| #define usbhsg_status_clr(gp, b) (gp->status &= ~b) | |
| #define usbhsg_status_has(gp, b) (gp->status & b) | |
| /* | |
| * queue push/pop | |
| */ | |
| static void __usbhsg_queue_pop(struct usbhsg_uep *uep, | |
| struct usbhsg_request *ureq, | |
| int status) | |
| { | |
| struct usbhsg_gpriv *gpriv = usbhsg_uep_to_gpriv(uep); | |
| struct usbhs_pipe *pipe = usbhsg_uep_to_pipe(uep); | |
| struct device *dev = usbhsg_gpriv_to_dev(gpriv); | |
| struct usbhs_priv *priv = usbhsg_gpriv_to_priv(gpriv); | |
| if (pipe) | |
| dev_dbg(dev, "pipe %d : queue pop\n", usbhs_pipe_number(pipe)); | |
| ureq->req.status = status; | |
| spin_unlock(usbhs_priv_to_lock(priv)); | |
| usb_gadget_giveback_request(&uep->ep, &ureq->req); | |
| spin_lock(usbhs_priv_to_lock(priv)); | |
| } | |
| static void usbhsg_queue_pop(struct usbhsg_uep *uep, | |
| struct usbhsg_request *ureq, | |
| int status) | |
| { | |
| struct usbhsg_gpriv *gpriv = usbhsg_uep_to_gpriv(uep); | |
| struct usbhs_priv *priv = usbhsg_gpriv_to_priv(gpriv); | |
| unsigned long flags; | |
| usbhs_lock(priv, flags); | |
| __usbhsg_queue_pop(uep, ureq, status); | |
| usbhs_unlock(priv, flags); | |
| } | |
| static void usbhsg_queue_done(struct usbhs_priv *priv, struct usbhs_pkt *pkt) | |
| { | |
| struct usbhs_pipe *pipe = pkt->pipe; | |
| struct usbhsg_uep *uep = usbhsg_pipe_to_uep(pipe); | |
| struct usbhsg_request *ureq = usbhsg_pkt_to_ureq(pkt); | |
| ureq->req.actual = pkt->actual; | |
| usbhsg_queue_pop(uep, ureq, 0); | |
| } | |
| static void usbhsg_queue_push(struct usbhsg_uep *uep, | |
| struct usbhsg_request *ureq) | |
| { | |
| struct usbhsg_gpriv *gpriv = usbhsg_uep_to_gpriv(uep); | |
| struct device *dev = usbhsg_gpriv_to_dev(gpriv); | |
| struct usbhs_pipe *pipe = usbhsg_uep_to_pipe(uep); | |
| struct usbhs_pkt *pkt = usbhsg_ureq_to_pkt(ureq); | |
| struct usb_request *req = &ureq->req; | |
| req->actual = 0; | |
| req->status = -EINPROGRESS; | |
| usbhs_pkt_push(pipe, pkt, usbhsg_queue_done, | |
| req->buf, req->length, req->zero, -1); | |
| usbhs_pkt_start(pipe); | |
| dev_dbg(dev, "pipe %d : queue push (%d)\n", | |
| usbhs_pipe_number(pipe), | |
| req->length); | |
| } | |
| /* | |
| * dma map/unmap | |
| */ | |
| static int usbhsg_dma_map_ctrl(struct usbhs_pkt *pkt, int map) | |
| { | |
| struct usbhsg_request *ureq = usbhsg_pkt_to_ureq(pkt); | |
| struct usb_request *req = &ureq->req; | |
| struct usbhs_pipe *pipe = pkt->pipe; | |
| struct usbhsg_uep *uep = usbhsg_pipe_to_uep(pipe); | |
| struct usbhsg_gpriv *gpriv = usbhsg_uep_to_gpriv(uep); | |
| enum dma_data_direction dir; | |
| int ret = 0; | |
| dir = usbhs_pipe_is_dir_host(pipe); | |
| if (map) { | |
| /* it can not use scatter/gather */ | |
| WARN_ON(req->num_sgs); | |
| ret = usb_gadget_map_request(&gpriv->gadget, req, dir); | |
| if (ret < 0) | |
| return ret; | |
| pkt->dma = req->dma; | |
| } else { | |
| usb_gadget_unmap_request(&gpriv->gadget, req, dir); | |
| } | |
| return ret; | |
| } | |
| /* | |
| * USB_TYPE_STANDARD / clear feature functions | |
| */ | |
| static int usbhsg_recip_handler_std_control_done(struct usbhs_priv *priv, | |
| struct usbhsg_uep *uep, | |
| struct usb_ctrlrequest *ctrl) | |
| { | |
| struct usbhsg_gpriv *gpriv = usbhsg_priv_to_gpriv(priv); | |
| struct usbhsg_uep *dcp = usbhsg_gpriv_to_dcp(gpriv); | |
| struct usbhs_pipe *pipe = usbhsg_uep_to_pipe(dcp); | |
| usbhs_dcp_control_transfer_done(pipe); | |
| return 0; | |
| } | |
| static int usbhsg_recip_handler_std_clear_endpoint(struct usbhs_priv *priv, | |
| struct usbhsg_uep *uep, | |
| struct usb_ctrlrequest *ctrl) | |
| { | |
| struct usbhsg_gpriv *gpriv = usbhsg_uep_to_gpriv(uep); | |
| struct usbhs_pipe *pipe = usbhsg_uep_to_pipe(uep); | |
| if (!usbhsg_status_has(gpriv, USBHSG_STATUS_WEDGE)) { | |
| usbhs_pipe_disable(pipe); | |
| usbhs_pipe_sequence_data0(pipe); | |
| usbhs_pipe_enable(pipe); | |
| } | |
| usbhsg_recip_handler_std_control_done(priv, uep, ctrl); | |
| usbhs_pkt_start(pipe); | |
| return 0; | |
| } | |
| static struct usbhsg_recip_handle req_clear_feature = { | |
| .name = "clear feature", | |
| .device = usbhsg_recip_handler_std_control_done, | |
| .interface = usbhsg_recip_handler_std_control_done, | |
| .endpoint = usbhsg_recip_handler_std_clear_endpoint, | |
| }; | |
| /* | |
| * USB_TYPE_STANDARD / set feature functions | |
| */ | |
| static int usbhsg_recip_handler_std_set_device(struct usbhs_priv *priv, | |
| struct usbhsg_uep *uep, | |
| struct usb_ctrlrequest *ctrl) | |
| { | |
| switch (le16_to_cpu(ctrl->wValue)) { | |
| case USB_DEVICE_TEST_MODE: | |
| usbhsg_recip_handler_std_control_done(priv, uep, ctrl); | |
| udelay(100); | |
| usbhs_sys_set_test_mode(priv, le16_to_cpu(ctrl->wIndex >> 8)); | |
| break; | |
| default: | |
| usbhsg_recip_handler_std_control_done(priv, uep, ctrl); | |
| break; | |
| } | |
| return 0; | |
| } | |
| static int usbhsg_recip_handler_std_set_endpoint(struct usbhs_priv *priv, | |
| struct usbhsg_uep *uep, | |
| struct usb_ctrlrequest *ctrl) | |
| { | |
| struct usbhs_pipe *pipe = usbhsg_uep_to_pipe(uep); | |
| usbhs_pipe_stall(pipe); | |
| usbhsg_recip_handler_std_control_done(priv, uep, ctrl); | |
| return 0; | |
| } | |
| static struct usbhsg_recip_handle req_set_feature = { | |
| .name = "set feature", | |
| .device = usbhsg_recip_handler_std_set_device, | |
| .interface = usbhsg_recip_handler_std_control_done, | |
| .endpoint = usbhsg_recip_handler_std_set_endpoint, | |
| }; | |
| /* | |
| * USB_TYPE_STANDARD / get status functions | |
| */ | |
| static void __usbhsg_recip_send_complete(struct usb_ep *ep, | |
| struct usb_request *req) | |
| { | |
| struct usbhsg_request *ureq = usbhsg_req_to_ureq(req); | |
| /* free allocated recip-buffer/usb_request */ | |
| kfree(ureq->pkt.buf); | |
| usb_ep_free_request(ep, req); | |
| } | |
| static void __usbhsg_recip_send_status(struct usbhsg_gpriv *gpriv, | |
| unsigned short status) | |
| { | |
| struct usbhsg_uep *dcp = usbhsg_gpriv_to_dcp(gpriv); | |
| struct usbhs_pipe *pipe = usbhsg_uep_to_pipe(dcp); | |
| struct device *dev = usbhsg_gpriv_to_dev(gpriv); | |
| struct usb_request *req; | |
| unsigned short *buf; | |
| /* alloc new usb_request for recip */ | |
| req = usb_ep_alloc_request(&dcp->ep, GFP_ATOMIC); | |
| if (!req) { | |
| dev_err(dev, "recip request allocation fail\n"); | |
| return; | |
| } | |
| /* alloc recip data buffer */ | |
| buf = kmalloc(sizeof(*buf), GFP_ATOMIC); | |
| if (!buf) { | |
| usb_ep_free_request(&dcp->ep, req); | |
| dev_err(dev, "recip data allocation fail\n"); | |
| return; | |
| } | |
| /* recip data is status */ | |
| *buf = cpu_to_le16(status); | |
| /* allocated usb_request/buffer will be freed */ | |
| req->complete = __usbhsg_recip_send_complete; | |
| req->buf = buf; | |
| req->length = sizeof(*buf); | |
| req->zero = 0; | |
| /* push packet */ | |
| pipe->handler = &usbhs_fifo_pio_push_handler; | |
| usbhsg_queue_push(dcp, usbhsg_req_to_ureq(req)); | |
| } | |
| static int usbhsg_recip_handler_std_get_device(struct usbhs_priv *priv, | |
| struct usbhsg_uep *uep, | |
| struct usb_ctrlrequest *ctrl) | |
| { | |
| struct usbhsg_gpriv *gpriv = usbhsg_uep_to_gpriv(uep); | |
| unsigned short status = 0; | |
| if (usbhsg_status_has(gpriv, USBHSG_STATUS_SELF_POWERED)) | |
| status = 1 << USB_DEVICE_SELF_POWERED; | |
| __usbhsg_recip_send_status(gpriv, status); | |
| return 0; | |
| } | |
| static int usbhsg_recip_handler_std_get_interface(struct usbhs_priv *priv, | |
| struct usbhsg_uep *uep, | |
| struct usb_ctrlrequest *ctrl) | |
| { | |
| struct usbhsg_gpriv *gpriv = usbhsg_uep_to_gpriv(uep); | |
| unsigned short status = 0; | |
| __usbhsg_recip_send_status(gpriv, status); | |
| return 0; | |
| } | |
| static int usbhsg_recip_handler_std_get_endpoint(struct usbhs_priv *priv, | |
| struct usbhsg_uep *uep, | |
| struct usb_ctrlrequest *ctrl) | |
| { | |
| struct usbhsg_gpriv *gpriv = usbhsg_uep_to_gpriv(uep); | |
| struct usbhs_pipe *pipe = usbhsg_uep_to_pipe(uep); | |
| unsigned short status = 0; | |
| if (usbhs_pipe_is_stall(pipe)) | |
| status = 1 << USB_ENDPOINT_HALT; | |
| __usbhsg_recip_send_status(gpriv, status); | |
| return 0; | |
| } | |
| static struct usbhsg_recip_handle req_get_status = { | |
| .name = "get status", | |
| .device = usbhsg_recip_handler_std_get_device, | |
| .interface = usbhsg_recip_handler_std_get_interface, | |
| .endpoint = usbhsg_recip_handler_std_get_endpoint, | |
| }; | |
| /* | |
| * USB_TYPE handler | |
| */ | |
| static int usbhsg_recip_run_handle(struct usbhs_priv *priv, | |
| struct usbhsg_recip_handle *handler, | |
| struct usb_ctrlrequest *ctrl) | |
| { | |
| struct usbhsg_gpriv *gpriv = usbhsg_priv_to_gpriv(priv); | |
| struct device *dev = usbhsg_gpriv_to_dev(gpriv); | |
| struct usbhsg_uep *uep; | |
| struct usbhs_pipe *pipe; | |
| int recip = ctrl->bRequestType & USB_RECIP_MASK; | |
| int nth = le16_to_cpu(ctrl->wIndex) & USB_ENDPOINT_NUMBER_MASK; | |
| int ret = 0; | |
| int (*func)(struct usbhs_priv *priv, struct usbhsg_uep *uep, | |
| struct usb_ctrlrequest *ctrl); | |
| char *msg; | |
| uep = usbhsg_gpriv_to_nth_uep(gpriv, nth); | |
| pipe = usbhsg_uep_to_pipe(uep); | |
| if (!pipe) { | |
| dev_err(dev, "wrong recip request\n"); | |
| return -EINVAL; | |
| } | |
| switch (recip) { | |
| case USB_RECIP_DEVICE: | |
| msg = "DEVICE"; | |
| func = handler->device; | |
| break; | |
| case USB_RECIP_INTERFACE: | |
| msg = "INTERFACE"; | |
| func = handler->interface; | |
| break; | |
| case USB_RECIP_ENDPOINT: | |
| msg = "ENDPOINT"; | |
| func = handler->endpoint; | |
| break; | |
| default: | |
| dev_warn(dev, "unsupported RECIP(%d)\n", recip); | |
| func = NULL; | |
| ret = -EINVAL; | |
| } | |
| if (func) { | |
| dev_dbg(dev, "%s (pipe %d :%s)\n", handler->name, nth, msg); | |
| ret = func(priv, uep, ctrl); | |
| } | |
| return ret; | |
| } | |
| /* | |
| * irq functions | |
| * | |
| * it will be called from usbhs_interrupt | |
| */ | |
| static int usbhsg_irq_dev_state(struct usbhs_priv *priv, | |
| struct usbhs_irq_state *irq_state) | |
| { | |
| struct usbhsg_gpriv *gpriv = usbhsg_priv_to_gpriv(priv); | |
| struct device *dev = usbhsg_gpriv_to_dev(gpriv); | |
| gpriv->gadget.speed = usbhs_bus_get_speed(priv); | |
| dev_dbg(dev, "state = %x : speed : %d\n", | |
| usbhs_status_get_device_state(irq_state), | |
| gpriv->gadget.speed); | |
| return 0; | |
| } | |
| static int usbhsg_irq_ctrl_stage(struct usbhs_priv *priv, | |
| struct usbhs_irq_state *irq_state) | |
| { | |
| struct usbhsg_gpriv *gpriv = usbhsg_priv_to_gpriv(priv); | |
| struct usbhsg_uep *dcp = usbhsg_gpriv_to_dcp(gpriv); | |
| struct usbhs_pipe *pipe = usbhsg_uep_to_pipe(dcp); | |
| struct device *dev = usbhsg_gpriv_to_dev(gpriv); | |
| struct usb_ctrlrequest ctrl; | |
| struct usbhsg_recip_handle *recip_handler = NULL; | |
| int stage = usbhs_status_get_ctrl_stage(irq_state); | |
| int ret = 0; | |
| dev_dbg(dev, "stage = %d\n", stage); | |
| /* | |
| * see Manual | |
| * | |
| * "Operation" | |
| * - "Interrupt Function" | |
| * - "Control Transfer Stage Transition Interrupt" | |
| * - Fig. "Control Transfer Stage Transitions" | |
| */ | |
| switch (stage) { | |
| case READ_DATA_STAGE: | |
| pipe->handler = &usbhs_fifo_pio_push_handler; | |
| break; | |
| case WRITE_DATA_STAGE: | |
| pipe->handler = &usbhs_fifo_pio_pop_handler; | |
| break; | |
| case NODATA_STATUS_STAGE: | |
| pipe->handler = &usbhs_ctrl_stage_end_handler; | |
| break; | |
| case READ_STATUS_STAGE: | |
| case WRITE_STATUS_STAGE: | |
| usbhs_dcp_control_transfer_done(pipe); | |
| default: | |
| return ret; | |
| } | |
| /* | |
| * get usb request | |
| */ | |
| usbhs_usbreq_get_val(priv, &ctrl); | |
| switch (ctrl.bRequestType & USB_TYPE_MASK) { | |
| case USB_TYPE_STANDARD: | |
| switch (ctrl.bRequest) { | |
| case USB_REQ_CLEAR_FEATURE: | |
| recip_handler = &req_clear_feature; | |
| break; | |
| case USB_REQ_SET_FEATURE: | |
| recip_handler = &req_set_feature; | |
| break; | |
| case USB_REQ_GET_STATUS: | |
| recip_handler = &req_get_status; | |
| break; | |
| } | |
| } | |
| /* | |
| * setup stage / run recip | |
| */ | |
| if (recip_handler) | |
| ret = usbhsg_recip_run_handle(priv, recip_handler, &ctrl); | |
| else | |
| ret = gpriv->driver->setup(&gpriv->gadget, &ctrl); | |
| if (ret < 0) | |
| usbhs_pipe_stall(pipe); | |
| return ret; | |
| } | |
| /* | |
| * | |
| * usb_dcp_ops | |
| * | |
| */ | |
| static int usbhsg_pipe_disable(struct usbhsg_uep *uep) | |
| { | |
| struct usbhs_pipe *pipe = usbhsg_uep_to_pipe(uep); | |
| struct usbhs_pkt *pkt; | |
| while (1) { | |
| pkt = usbhs_pkt_pop(pipe, NULL); | |
| if (!pkt) | |
| break; | |
| usbhsg_queue_pop(uep, usbhsg_pkt_to_ureq(pkt), -ECONNRESET); | |
| } | |
| usbhs_pipe_disable(pipe); | |
| return 0; | |
| } | |
| /* | |
| * | |
| * usb_ep_ops | |
| * | |
| */ | |
| static int usbhsg_ep_enable(struct usb_ep *ep, | |
| const struct usb_endpoint_descriptor *desc) | |
| { | |
| struct usbhsg_uep *uep = usbhsg_ep_to_uep(ep); | |
| struct usbhsg_gpriv *gpriv = usbhsg_uep_to_gpriv(uep); | |
| struct usbhs_priv *priv = usbhsg_gpriv_to_priv(gpriv); | |
| struct usbhs_pipe *pipe; | |
| int ret = -EIO; | |
| /* | |
| * if it already have pipe, | |
| * nothing to do | |
| */ | |
| if (uep->pipe) { | |
| usbhs_pipe_clear(uep->pipe); | |
| usbhs_pipe_sequence_data0(uep->pipe); | |
| return 0; | |
| } | |
| pipe = usbhs_pipe_malloc(priv, | |
| usb_endpoint_type(desc), | |
| usb_endpoint_dir_in(desc)); | |
| if (pipe) { | |
| uep->pipe = pipe; | |
| pipe->mod_private = uep; | |
| /* set epnum / maxp */ | |
| usbhs_pipe_config_update(pipe, 0, | |
| usb_endpoint_num(desc), | |
| usb_endpoint_maxp(desc)); | |
| /* | |
| * usbhs_fifo_dma_push/pop_handler try to | |
| * use dmaengine if possible. | |
| * It will use pio handler if impossible. | |
| */ | |
| if (usb_endpoint_dir_in(desc)) | |
| pipe->handler = &usbhs_fifo_dma_push_handler; | |
| else | |
| pipe->handler = &usbhs_fifo_dma_pop_handler; | |
| ret = 0; | |
| } | |
| return ret; | |
| } | |
| static int usbhsg_ep_disable(struct usb_ep *ep) | |
| { | |
| struct usbhsg_uep *uep = usbhsg_ep_to_uep(ep); | |
| struct usbhs_pipe *pipe = usbhsg_uep_to_pipe(uep); | |
| if (!pipe) | |
| return -EINVAL; | |
| usbhsg_pipe_disable(uep); | |
| usbhs_pipe_free(pipe); | |
| uep->pipe->mod_private = NULL; | |
| uep->pipe = NULL; | |
| return 0; | |
| } | |
| static struct usb_request *usbhsg_ep_alloc_request(struct usb_ep *ep, | |
| gfp_t gfp_flags) | |
| { | |
| struct usbhsg_request *ureq; | |
| ureq = kzalloc(sizeof *ureq, gfp_flags); | |
| if (!ureq) | |
| return NULL; | |
| usbhs_pkt_init(usbhsg_ureq_to_pkt(ureq)); | |
| return &ureq->req; | |
| } | |
| static void usbhsg_ep_free_request(struct usb_ep *ep, | |
| struct usb_request *req) | |
| { | |
| struct usbhsg_request *ureq = usbhsg_req_to_ureq(req); | |
| WARN_ON(!list_empty(&ureq->pkt.node)); | |
| kfree(ureq); | |
| } | |
| static int usbhsg_ep_queue(struct usb_ep *ep, struct usb_request *req, | |
| gfp_t gfp_flags) | |
| { | |
| struct usbhsg_uep *uep = usbhsg_ep_to_uep(ep); | |
| struct usbhsg_gpriv *gpriv = usbhsg_uep_to_gpriv(uep); | |
| struct usbhsg_request *ureq = usbhsg_req_to_ureq(req); | |
| struct usbhs_pipe *pipe = usbhsg_uep_to_pipe(uep); | |
| /* param check */ | |
| if (usbhsg_is_not_connected(gpriv) || | |
| unlikely(!gpriv->driver) || | |
| unlikely(!pipe)) | |
| return -ESHUTDOWN; | |
| usbhsg_queue_push(uep, ureq); | |
| return 0; | |
| } | |
| static int usbhsg_ep_dequeue(struct usb_ep *ep, struct usb_request *req) | |
| { | |
| struct usbhsg_uep *uep = usbhsg_ep_to_uep(ep); | |
| struct usbhsg_request *ureq = usbhsg_req_to_ureq(req); | |
| struct usbhs_pipe *pipe = usbhsg_uep_to_pipe(uep); | |
| if (pipe) | |
| usbhs_pkt_pop(pipe, usbhsg_ureq_to_pkt(ureq)); | |
| /* | |
| * To dequeue a request, this driver should call the usbhsg_queue_pop() | |
| * even if the pipe is NULL. | |
| */ | |
| usbhsg_queue_pop(uep, ureq, -ECONNRESET); | |
| return 0; | |
| } | |
| static int __usbhsg_ep_set_halt_wedge(struct usb_ep *ep, int halt, int wedge) | |
| { | |
| struct usbhsg_uep *uep = usbhsg_ep_to_uep(ep); | |
| struct usbhs_pipe *pipe = usbhsg_uep_to_pipe(uep); | |
| struct usbhsg_gpriv *gpriv = usbhsg_uep_to_gpriv(uep); | |
| struct usbhs_priv *priv = usbhsg_gpriv_to_priv(gpriv); | |
| struct device *dev = usbhsg_gpriv_to_dev(gpriv); | |
| unsigned long flags; | |
| usbhsg_pipe_disable(uep); | |
| dev_dbg(dev, "set halt %d (pipe %d)\n", | |
| halt, usbhs_pipe_number(pipe)); | |
| /******************** spin lock ********************/ | |
| usbhs_lock(priv, flags); | |
| if (halt) | |
| usbhs_pipe_stall(pipe); | |
| else | |
| usbhs_pipe_disable(pipe); | |
| if (halt && wedge) | |
| usbhsg_status_set(gpriv, USBHSG_STATUS_WEDGE); | |
| else | |
| usbhsg_status_clr(gpriv, USBHSG_STATUS_WEDGE); | |
| usbhs_unlock(priv, flags); | |
| /******************** spin unlock ******************/ | |
| return 0; | |
| } | |
| static int usbhsg_ep_set_halt(struct usb_ep *ep, int value) | |
| { | |
| return __usbhsg_ep_set_halt_wedge(ep, value, 0); | |
| } | |
| static int usbhsg_ep_set_wedge(struct usb_ep *ep) | |
| { | |
| return __usbhsg_ep_set_halt_wedge(ep, 1, 1); | |
| } | |
| static struct usb_ep_ops usbhsg_ep_ops = { | |
| .enable = usbhsg_ep_enable, | |
| .disable = usbhsg_ep_disable, | |
| .alloc_request = usbhsg_ep_alloc_request, | |
| .free_request = usbhsg_ep_free_request, | |
| .queue = usbhsg_ep_queue, | |
| .dequeue = usbhsg_ep_dequeue, | |
| .set_halt = usbhsg_ep_set_halt, | |
| .set_wedge = usbhsg_ep_set_wedge, | |
| }; | |
| /* | |
| * pullup control | |
| */ | |
| static int usbhsg_can_pullup(struct usbhs_priv *priv) | |
| { | |
| struct usbhsg_gpriv *gpriv = usbhsg_priv_to_gpriv(priv); | |
| return gpriv->driver && | |
| usbhsg_status_has(gpriv, USBHSG_STATUS_SOFT_CONNECT); | |
| } | |
| static void usbhsg_update_pullup(struct usbhs_priv *priv) | |
| { | |
| if (usbhsg_can_pullup(priv)) | |
| usbhs_sys_function_pullup(priv, 1); | |
| else | |
| usbhs_sys_function_pullup(priv, 0); | |
| } | |
| /* | |
| * usb module start/end | |
| */ | |
| static int usbhsg_try_start(struct usbhs_priv *priv, u32 status) | |
| { | |
| struct usbhsg_gpriv *gpriv = usbhsg_priv_to_gpriv(priv); | |
| struct usbhsg_uep *dcp = usbhsg_gpriv_to_dcp(gpriv); | |
| struct usbhs_mod *mod = usbhs_mod_get_current(priv); | |
| struct device *dev = usbhs_priv_to_dev(priv); | |
| unsigned long flags; | |
| int ret = 0; | |
| /******************** spin lock ********************/ | |
| usbhs_lock(priv, flags); | |
| usbhsg_status_set(gpriv, status); | |
| if (!(usbhsg_status_has(gpriv, USBHSG_STATUS_STARTED) && | |
| usbhsg_status_has(gpriv, USBHSG_STATUS_REGISTERD))) | |
| ret = -1; /* not ready */ | |
| usbhs_unlock(priv, flags); | |
| /******************** spin unlock ********************/ | |
| if (ret < 0) | |
| return 0; /* not ready is not error */ | |
| /* | |
| * enable interrupt and systems if ready | |
| */ | |
| dev_dbg(dev, "start gadget\n"); | |
| /* | |
| * pipe initialize and enable DCP | |
| */ | |
| usbhs_fifo_init(priv); | |
| usbhs_pipe_init(priv, | |
| usbhsg_dma_map_ctrl); | |
| /* dcp init instead of usbhsg_ep_enable() */ | |
| dcp->pipe = usbhs_dcp_malloc(priv); | |
| dcp->pipe->mod_private = dcp; | |
| usbhs_pipe_config_update(dcp->pipe, 0, 0, 64); | |
| /* | |
| * system config enble | |
| * - HI speed | |
| * - function | |
| * - usb module | |
| */ | |
| usbhs_sys_function_ctrl(priv, 1); | |
| usbhsg_update_pullup(priv); | |
| /* | |
| * enable irq callback | |
| */ | |
| mod->irq_dev_state = usbhsg_irq_dev_state; | |
| mod->irq_ctrl_stage = usbhsg_irq_ctrl_stage; | |
| usbhs_irq_callback_update(priv, mod); | |
| return 0; | |
| } | |
| static int usbhsg_try_stop(struct usbhs_priv *priv, u32 status) | |
| { | |
| struct usbhsg_gpriv *gpriv = usbhsg_priv_to_gpriv(priv); | |
| struct usbhs_mod *mod = usbhs_mod_get_current(priv); | |
| struct usbhsg_uep *dcp = usbhsg_gpriv_to_dcp(gpriv); | |
| struct device *dev = usbhs_priv_to_dev(priv); | |
| unsigned long flags; | |
| int ret = 0; | |
| /******************** spin lock ********************/ | |
| usbhs_lock(priv, flags); | |
| usbhsg_status_clr(gpriv, status); | |
| if (!usbhsg_status_has(gpriv, USBHSG_STATUS_STARTED) && | |
| !usbhsg_status_has(gpriv, USBHSG_STATUS_REGISTERD)) | |
| ret = -1; /* already done */ | |
| usbhs_unlock(priv, flags); | |
| /******************** spin unlock ********************/ | |
| if (ret < 0) | |
| return 0; /* already done is not error */ | |
| /* | |
| * disable interrupt and systems if 1st try | |
| */ | |
| usbhs_fifo_quit(priv); | |
| /* disable all irq */ | |
| mod->irq_dev_state = NULL; | |
| mod->irq_ctrl_stage = NULL; | |
| usbhs_irq_callback_update(priv, mod); | |
| gpriv->gadget.speed = USB_SPEED_UNKNOWN; | |
| /* disable sys */ | |
| usbhs_sys_set_test_mode(priv, 0); | |
| usbhs_sys_function_ctrl(priv, 0); | |
| usbhsg_ep_disable(&dcp->ep); | |
| dev_dbg(dev, "stop gadget\n"); | |
| return 0; | |
| } | |
| /* | |
| * VBUS provided by the PHY | |
| */ | |
| static int usbhsm_phy_get_vbus(struct platform_device *pdev) | |
| { | |
| struct usbhs_priv *priv = usbhs_pdev_to_priv(pdev); | |
| struct usbhsg_gpriv *gpriv = usbhsg_priv_to_gpriv(priv); | |
| return gpriv->vbus_active; | |
| } | |
| static void usbhs_mod_phy_mode(struct usbhs_priv *priv) | |
| { | |
| struct usbhs_mod_info *info = &priv->mod_info; | |
| info->irq_vbus = NULL; | |
| priv->pfunc.get_vbus = usbhsm_phy_get_vbus; | |
| usbhs_irq_callback_update(priv, NULL); | |
| } | |
| /* | |
| * | |
| * linux usb function | |
| * | |
| */ | |
| static int usbhsg_gadget_start(struct usb_gadget *gadget, | |
| struct usb_gadget_driver *driver) | |
| { | |
| struct usbhsg_gpriv *gpriv = usbhsg_gadget_to_gpriv(gadget); | |
| struct usbhs_priv *priv = usbhsg_gpriv_to_priv(gpriv); | |
| struct device *dev = usbhs_priv_to_dev(priv); | |
| int ret; | |
| if (!driver || | |
| !driver->setup || | |
| driver->max_speed < USB_SPEED_FULL) | |
| return -EINVAL; | |
| /* connect to bus through transceiver */ | |
| if (!IS_ERR_OR_NULL(gpriv->transceiver)) { | |
| ret = otg_set_peripheral(gpriv->transceiver->otg, | |
| &gpriv->gadget); | |
| if (ret) { | |
| dev_err(dev, "%s: can't bind to transceiver\n", | |
| gpriv->gadget.name); | |
| return ret; | |
| } | |
| /* get vbus using phy versions */ | |
| usbhs_mod_phy_mode(priv); | |
| } | |
| /* first hook up the driver ... */ | |
| gpriv->driver = driver; | |
| return usbhsg_try_start(priv, USBHSG_STATUS_REGISTERD); | |
| } | |
| static int usbhsg_gadget_stop(struct usb_gadget *gadget) | |
| { | |
| struct usbhsg_gpriv *gpriv = usbhsg_gadget_to_gpriv(gadget); | |
| struct usbhs_priv *priv = usbhsg_gpriv_to_priv(gpriv); | |
| usbhsg_try_stop(priv, USBHSG_STATUS_REGISTERD); | |
| if (!IS_ERR_OR_NULL(gpriv->transceiver)) | |
| otg_set_peripheral(gpriv->transceiver->otg, NULL); | |
| gpriv->driver = NULL; | |
| return 0; | |
| } | |
| /* | |
| * usb gadget ops | |
| */ | |
| static int usbhsg_get_frame(struct usb_gadget *gadget) | |
| { | |
| struct usbhsg_gpriv *gpriv = usbhsg_gadget_to_gpriv(gadget); | |
| struct usbhs_priv *priv = usbhsg_gpriv_to_priv(gpriv); | |
| return usbhs_frame_get_num(priv); | |
| } | |
| static int usbhsg_pullup(struct usb_gadget *gadget, int is_on) | |
| { | |
| struct usbhsg_gpriv *gpriv = usbhsg_gadget_to_gpriv(gadget); | |
| struct usbhs_priv *priv = usbhsg_gpriv_to_priv(gpriv); | |
| unsigned long flags; | |
| usbhs_lock(priv, flags); | |
| if (is_on) | |
| usbhsg_status_set(gpriv, USBHSG_STATUS_SOFT_CONNECT); | |
| else | |
| usbhsg_status_clr(gpriv, USBHSG_STATUS_SOFT_CONNECT); | |
| usbhsg_update_pullup(priv); | |
| usbhs_unlock(priv, flags); | |
| return 0; | |
| } | |
| static int usbhsg_set_selfpowered(struct usb_gadget *gadget, int is_self) | |
| { | |
| struct usbhsg_gpriv *gpriv = usbhsg_gadget_to_gpriv(gadget); | |
| if (is_self) | |
| usbhsg_status_set(gpriv, USBHSG_STATUS_SELF_POWERED); | |
| else | |
| usbhsg_status_clr(gpriv, USBHSG_STATUS_SELF_POWERED); | |
| gadget->is_selfpowered = (is_self != 0); | |
| return 0; | |
| } | |
| static int usbhsg_vbus_session(struct usb_gadget *gadget, int is_active) | |
| { | |
| struct usbhsg_gpriv *gpriv = usbhsg_gadget_to_gpriv(gadget); | |
| struct usbhs_priv *priv = usbhsg_gpriv_to_priv(gpriv); | |
| struct platform_device *pdev = usbhs_priv_to_pdev(priv); | |
| gpriv->vbus_active = !!is_active; | |
| renesas_usbhs_call_notify_hotplug(pdev); | |
| return 0; | |
| } | |
| static const struct usb_gadget_ops usbhsg_gadget_ops = { | |
| .get_frame = usbhsg_get_frame, | |
| .set_selfpowered = usbhsg_set_selfpowered, | |
| .udc_start = usbhsg_gadget_start, | |
| .udc_stop = usbhsg_gadget_stop, | |
| .pullup = usbhsg_pullup, | |
| .vbus_session = usbhsg_vbus_session, | |
| }; | |
| static int usbhsg_start(struct usbhs_priv *priv) | |
| { | |
| return usbhsg_try_start(priv, USBHSG_STATUS_STARTED); | |
| } | |
| static int usbhsg_stop(struct usbhs_priv *priv) | |
| { | |
| struct usbhsg_gpriv *gpriv = usbhsg_priv_to_gpriv(priv); | |
| /* cable disconnect */ | |
| if (gpriv->driver && | |
| gpriv->driver->disconnect) | |
| gpriv->driver->disconnect(&gpriv->gadget); | |
| return usbhsg_try_stop(priv, USBHSG_STATUS_STARTED); | |
| } | |
| int usbhs_mod_gadget_probe(struct usbhs_priv *priv) | |
| { | |
| struct usbhsg_gpriv *gpriv; | |
| struct usbhsg_uep *uep; | |
| struct device *dev = usbhs_priv_to_dev(priv); | |
| int pipe_size = usbhs_get_dparam(priv, pipe_size); | |
| int i; | |
| int ret; | |
| gpriv = kzalloc(sizeof(struct usbhsg_gpriv), GFP_KERNEL); | |
| if (!gpriv) { | |
| dev_err(dev, "Could not allocate gadget priv\n"); | |
| return -ENOMEM; | |
| } | |
| uep = kzalloc(sizeof(struct usbhsg_uep) * pipe_size, GFP_KERNEL); | |
| if (!uep) { | |
| dev_err(dev, "Could not allocate ep\n"); | |
| ret = -ENOMEM; | |
| goto usbhs_mod_gadget_probe_err_gpriv; | |
| } | |
| gpriv->transceiver = usb_get_phy(USB_PHY_TYPE_UNDEFINED); | |
| dev_info(dev, "%stransceiver found\n", | |
| gpriv->transceiver ? "" : "no "); | |
| /* | |
| * CAUTION | |
| * | |
| * There is no guarantee that it is possible to access usb module here. | |
| * Don't accesses to it. | |
| * The accesse will be enable after "usbhsg_start" | |
| */ | |
| /* | |
| * register itself | |
| */ | |
| usbhs_mod_register(priv, &gpriv->mod, USBHS_GADGET); | |
| /* init gpriv */ | |
| gpriv->mod.name = "gadget"; | |
| gpriv->mod.start = usbhsg_start; | |
| gpriv->mod.stop = usbhsg_stop; | |
| gpriv->uep = uep; | |
| gpriv->uep_size = pipe_size; | |
| usbhsg_status_init(gpriv); | |
| /* | |
| * init gadget | |
| */ | |
| gpriv->gadget.dev.parent = dev; | |
| gpriv->gadget.name = "renesas_usbhs_udc"; | |
| gpriv->gadget.ops = &usbhsg_gadget_ops; | |
| gpriv->gadget.max_speed = USB_SPEED_HIGH; | |
| INIT_LIST_HEAD(&gpriv->gadget.ep_list); | |
| /* | |
| * init usb_ep | |
| */ | |
| usbhsg_for_each_uep_with_dcp(uep, gpriv, i) { | |
| uep->gpriv = gpriv; | |
| uep->pipe = NULL; | |
| snprintf(uep->ep_name, EP_NAME_SIZE, "ep%d", i); | |
| uep->ep.name = uep->ep_name; | |
| uep->ep.ops = &usbhsg_ep_ops; | |
| INIT_LIST_HEAD(&uep->ep.ep_list); | |
| /* init DCP */ | |
| if (usbhsg_is_dcp(uep)) { | |
| gpriv->gadget.ep0 = &uep->ep; | |
| usb_ep_set_maxpacket_limit(&uep->ep, 64); | |
| uep->ep.caps.type_control = true; | |
| } | |
| /* init normal pipe */ | |
| else { | |
| usb_ep_set_maxpacket_limit(&uep->ep, 512); | |
| uep->ep.caps.type_iso = true; | |
| uep->ep.caps.type_bulk = true; | |
| uep->ep.caps.type_int = true; | |
| list_add_tail(&uep->ep.ep_list, &gpriv->gadget.ep_list); | |
| } | |
| uep->ep.caps.dir_in = true; | |
| uep->ep.caps.dir_out = true; | |
| } | |
| ret = usb_add_gadget_udc(dev, &gpriv->gadget); | |
| if (ret) | |
| goto err_add_udc; | |
| dev_info(dev, "gadget probed\n"); | |
| return 0; | |
| err_add_udc: | |
| kfree(gpriv->uep); | |
| usbhs_mod_gadget_probe_err_gpriv: | |
| kfree(gpriv); | |
| return ret; | |
| } | |
| void usbhs_mod_gadget_remove(struct usbhs_priv *priv) | |
| { | |
| struct usbhsg_gpriv *gpriv = usbhsg_priv_to_gpriv(priv); | |
| usb_del_gadget_udc(&gpriv->gadget); | |
| kfree(gpriv->uep); | |
| kfree(gpriv); | |
| } |