| /* | |
| * Renesas USB driver | |
| * | |
| * Copyright (C) 2011 Renesas Solutions Corp. | |
| * Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> | |
| * | |
| * This program is distributed in the hope that it will be useful, | |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| * GNU General Public License for more details. | |
| * | |
| * You should have received a copy of the GNU General Public License | |
| * along with this program; if not, write to the Free Software | |
| * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA | |
| * | |
| */ | |
| #include <linux/delay.h> | |
| #include <linux/slab.h> | |
| #include "common.h" | |
| #include "pipe.h" | |
| /* | |
| * macros | |
| */ | |
| #define usbhsp_addr_offset(p) ((usbhs_pipe_number(p) - 1) * 2) | |
| #define usbhsp_flags_set(p, f) ((p)->flags |= USBHS_PIPE_FLAGS_##f) | |
| #define usbhsp_flags_clr(p, f) ((p)->flags &= ~USBHS_PIPE_FLAGS_##f) | |
| #define usbhsp_flags_has(p, f) ((p)->flags & USBHS_PIPE_FLAGS_##f) | |
| #define usbhsp_flags_init(p) do {(p)->flags = 0; } while (0) | |
| /* | |
| * for debug | |
| */ | |
| static char *usbhsp_pipe_name[] = { | |
| [USB_ENDPOINT_XFER_CONTROL] = "DCP", | |
| [USB_ENDPOINT_XFER_BULK] = "BULK", | |
| [USB_ENDPOINT_XFER_INT] = "INT", | |
| [USB_ENDPOINT_XFER_ISOC] = "ISO", | |
| }; | |
| char *usbhs_pipe_name(struct usbhs_pipe *pipe) | |
| { | |
| return usbhsp_pipe_name[usbhs_pipe_type(pipe)]; | |
| } | |
| /* | |
| * DCPCTR/PIPEnCTR functions | |
| */ | |
| static void usbhsp_pipectrl_set(struct usbhs_pipe *pipe, u16 mask, u16 val) | |
| { | |
| struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe); | |
| int offset = usbhsp_addr_offset(pipe); | |
| if (usbhs_pipe_is_dcp(pipe)) | |
| usbhs_bset(priv, DCPCTR, mask, val); | |
| else | |
| usbhs_bset(priv, PIPEnCTR + offset, mask, val); | |
| } | |
| static u16 usbhsp_pipectrl_get(struct usbhs_pipe *pipe) | |
| { | |
| struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe); | |
| int offset = usbhsp_addr_offset(pipe); | |
| if (usbhs_pipe_is_dcp(pipe)) | |
| return usbhs_read(priv, DCPCTR); | |
| else | |
| return usbhs_read(priv, PIPEnCTR + offset); | |
| } | |
| /* | |
| * DCP/PIPE functions | |
| */ | |
| static void __usbhsp_pipe_xxx_set(struct usbhs_pipe *pipe, | |
| u16 dcp_reg, u16 pipe_reg, | |
| u16 mask, u16 val) | |
| { | |
| struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe); | |
| if (usbhs_pipe_is_dcp(pipe)) | |
| usbhs_bset(priv, dcp_reg, mask, val); | |
| else | |
| usbhs_bset(priv, pipe_reg, mask, val); | |
| } | |
| static u16 __usbhsp_pipe_xxx_get(struct usbhs_pipe *pipe, | |
| u16 dcp_reg, u16 pipe_reg) | |
| { | |
| struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe); | |
| if (usbhs_pipe_is_dcp(pipe)) | |
| return usbhs_read(priv, dcp_reg); | |
| else | |
| return usbhs_read(priv, pipe_reg); | |
| } | |
| /* | |
| * DCPCFG/PIPECFG functions | |
| */ | |
| static void usbhsp_pipe_cfg_set(struct usbhs_pipe *pipe, u16 mask, u16 val) | |
| { | |
| __usbhsp_pipe_xxx_set(pipe, DCPCFG, PIPECFG, mask, val); | |
| } | |
| static u16 usbhsp_pipe_cfg_get(struct usbhs_pipe *pipe) | |
| { | |
| return __usbhsp_pipe_xxx_get(pipe, DCPCFG, PIPECFG); | |
| } | |
| /* | |
| * PIPEnTRN/PIPEnTRE functions | |
| */ | |
| static void usbhsp_pipe_trn_set(struct usbhs_pipe *pipe, u16 mask, u16 val) | |
| { | |
| struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe); | |
| struct device *dev = usbhs_priv_to_dev(priv); | |
| int num = usbhs_pipe_number(pipe); | |
| u16 reg; | |
| /* | |
| * It is impossible to calculate address, | |
| * since PIPEnTRN addresses were mapped randomly. | |
| */ | |
| #define CASE_PIPExTRN(a) \ | |
| case 0x ## a: \ | |
| reg = PIPE ## a ## TRN; \ | |
| break; | |
| switch (num) { | |
| CASE_PIPExTRN(1); | |
| CASE_PIPExTRN(2); | |
| CASE_PIPExTRN(3); | |
| CASE_PIPExTRN(4); | |
| CASE_PIPExTRN(5); | |
| CASE_PIPExTRN(B); | |
| CASE_PIPExTRN(C); | |
| CASE_PIPExTRN(D); | |
| CASE_PIPExTRN(E); | |
| CASE_PIPExTRN(F); | |
| CASE_PIPExTRN(9); | |
| CASE_PIPExTRN(A); | |
| default: | |
| dev_err(dev, "unknown pipe (%d)\n", num); | |
| return; | |
| } | |
| __usbhsp_pipe_xxx_set(pipe, 0, reg, mask, val); | |
| } | |
| static void usbhsp_pipe_tre_set(struct usbhs_pipe *pipe, u16 mask, u16 val) | |
| { | |
| struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe); | |
| struct device *dev = usbhs_priv_to_dev(priv); | |
| int num = usbhs_pipe_number(pipe); | |
| u16 reg; | |
| /* | |
| * It is impossible to calculate address, | |
| * since PIPEnTRE addresses were mapped randomly. | |
| */ | |
| #define CASE_PIPExTRE(a) \ | |
| case 0x ## a: \ | |
| reg = PIPE ## a ## TRE; \ | |
| break; | |
| switch (num) { | |
| CASE_PIPExTRE(1); | |
| CASE_PIPExTRE(2); | |
| CASE_PIPExTRE(3); | |
| CASE_PIPExTRE(4); | |
| CASE_PIPExTRE(5); | |
| CASE_PIPExTRE(B); | |
| CASE_PIPExTRE(C); | |
| CASE_PIPExTRE(D); | |
| CASE_PIPExTRE(E); | |
| CASE_PIPExTRE(F); | |
| CASE_PIPExTRE(9); | |
| CASE_PIPExTRE(A); | |
| default: | |
| dev_err(dev, "unknown pipe (%d)\n", num); | |
| return; | |
| } | |
| __usbhsp_pipe_xxx_set(pipe, 0, reg, mask, val); | |
| } | |
| /* | |
| * PIPEBUF | |
| */ | |
| static void usbhsp_pipe_buf_set(struct usbhs_pipe *pipe, u16 mask, u16 val) | |
| { | |
| if (usbhs_pipe_is_dcp(pipe)) | |
| return; | |
| __usbhsp_pipe_xxx_set(pipe, 0, PIPEBUF, mask, val); | |
| } | |
| /* | |
| * DCPMAXP/PIPEMAXP | |
| */ | |
| static void usbhsp_pipe_maxp_set(struct usbhs_pipe *pipe, u16 mask, u16 val) | |
| { | |
| __usbhsp_pipe_xxx_set(pipe, DCPMAXP, PIPEMAXP, mask, val); | |
| } | |
| /* | |
| * pipe control functions | |
| */ | |
| static void usbhsp_pipe_select(struct usbhs_pipe *pipe) | |
| { | |
| struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe); | |
| /* | |
| * On pipe, this is necessary before | |
| * accesses to below registers. | |
| * | |
| * PIPESEL : usbhsp_pipe_select | |
| * PIPECFG : usbhsp_pipe_cfg_xxx | |
| * PIPEBUF : usbhsp_pipe_buf_xxx | |
| * PIPEMAXP : usbhsp_pipe_maxp_xxx | |
| * PIPEPERI | |
| */ | |
| /* | |
| * if pipe is dcp, no pipe is selected. | |
| * it is no problem, because dcp have its register | |
| */ | |
| usbhs_write(priv, PIPESEL, 0xF & usbhs_pipe_number(pipe)); | |
| } | |
| static int usbhsp_pipe_barrier(struct usbhs_pipe *pipe) | |
| { | |
| struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe); | |
| int timeout = 1024; | |
| u16 val; | |
| /* | |
| * make sure.... | |
| * | |
| * Modify these bits when CSSTS = 0, PID = NAK, and no pipe number is | |
| * specified by the CURPIPE bits. | |
| * When changing the setting of this bit after changing | |
| * the PID bits for the selected pipe from BUF to NAK, | |
| * check that CSSTS = 0 and PBUSY = 0. | |
| */ | |
| /* | |
| * CURPIPE bit = 0 | |
| * | |
| * see also | |
| * "Operation" | |
| * - "Pipe Control" | |
| * - "Pipe Control Registers Switching Procedure" | |
| */ | |
| usbhs_write(priv, CFIFOSEL, 0); | |
| usbhs_pipe_disable(pipe); | |
| do { | |
| val = usbhsp_pipectrl_get(pipe); | |
| val &= CSSTS | PID_MASK; | |
| if (!val) | |
| return 0; | |
| udelay(10); | |
| } while (timeout--); | |
| return -EBUSY; | |
| } | |
| int usbhs_pipe_is_accessible(struct usbhs_pipe *pipe) | |
| { | |
| u16 val; | |
| val = usbhsp_pipectrl_get(pipe); | |
| if (val & BSTS) | |
| return 0; | |
| return -EBUSY; | |
| } | |
| /* | |
| * PID ctrl | |
| */ | |
| static void __usbhsp_pid_try_nak_if_stall(struct usbhs_pipe *pipe) | |
| { | |
| u16 pid = usbhsp_pipectrl_get(pipe); | |
| pid &= PID_MASK; | |
| /* | |
| * see | |
| * "Pipe n Control Register" - "PID" | |
| */ | |
| switch (pid) { | |
| case PID_STALL11: | |
| usbhsp_pipectrl_set(pipe, PID_MASK, PID_STALL10); | |
| /* fall-through */ | |
| case PID_STALL10: | |
| usbhsp_pipectrl_set(pipe, PID_MASK, PID_NAK); | |
| } | |
| } | |
| void usbhs_pipe_disable(struct usbhs_pipe *pipe) | |
| { | |
| int timeout = 1024; | |
| u16 val; | |
| /* see "Pipe n Control Register" - "PID" */ | |
| __usbhsp_pid_try_nak_if_stall(pipe); | |
| usbhsp_pipectrl_set(pipe, PID_MASK, PID_NAK); | |
| do { | |
| val = usbhsp_pipectrl_get(pipe); | |
| val &= PBUSY; | |
| if (!val) | |
| break; | |
| udelay(10); | |
| } while (timeout--); | |
| } | |
| void usbhs_pipe_enable(struct usbhs_pipe *pipe) | |
| { | |
| /* see "Pipe n Control Register" - "PID" */ | |
| __usbhsp_pid_try_nak_if_stall(pipe); | |
| usbhsp_pipectrl_set(pipe, PID_MASK, PID_BUF); | |
| } | |
| void usbhs_pipe_stall(struct usbhs_pipe *pipe) | |
| { | |
| u16 pid = usbhsp_pipectrl_get(pipe); | |
| pid &= PID_MASK; | |
| /* | |
| * see | |
| * "Pipe n Control Register" - "PID" | |
| */ | |
| switch (pid) { | |
| case PID_NAK: | |
| usbhsp_pipectrl_set(pipe, PID_MASK, PID_STALL10); | |
| break; | |
| case PID_BUF: | |
| usbhsp_pipectrl_set(pipe, PID_MASK, PID_STALL11); | |
| break; | |
| } | |
| } | |
| int usbhs_pipe_is_stall(struct usbhs_pipe *pipe) | |
| { | |
| u16 pid = usbhsp_pipectrl_get(pipe) & PID_MASK; | |
| return (int)(pid == PID_STALL10 || pid == PID_STALL11); | |
| } | |
| void usbhs_pipe_set_trans_count_if_bulk(struct usbhs_pipe *pipe, int len) | |
| { | |
| if (!usbhs_pipe_type_is(pipe, USB_ENDPOINT_XFER_BULK)) | |
| return; | |
| /* | |
| * clear and disable transfer counter for IN/OUT pipe | |
| */ | |
| usbhsp_pipe_tre_set(pipe, TRCLR | TRENB, TRCLR); | |
| /* | |
| * Only IN direction bulk pipe can use transfer count. | |
| * Without using this function, | |
| * received data will break if it was large data size. | |
| * see PIPEnTRN/PIPEnTRE for detail | |
| */ | |
| if (usbhs_pipe_is_dir_in(pipe)) { | |
| int maxp = usbhs_pipe_get_maxpacket(pipe); | |
| usbhsp_pipe_trn_set(pipe, 0xffff, DIV_ROUND_UP(len, maxp)); | |
| usbhsp_pipe_tre_set(pipe, TRENB, TRENB); /* enable */ | |
| } | |
| } | |
| /* | |
| * pipe setup | |
| */ | |
| static int usbhsp_possible_double_buffer(struct usbhs_pipe *pipe) | |
| { | |
| /* | |
| * only ISO / BULK pipe can use double buffer | |
| */ | |
| if (usbhs_pipe_type_is(pipe, USB_ENDPOINT_XFER_BULK) || | |
| usbhs_pipe_type_is(pipe, USB_ENDPOINT_XFER_ISOC)) | |
| return 1; | |
| return 0; | |
| } | |
| static u16 usbhsp_setup_pipecfg(struct usbhs_pipe *pipe, | |
| int is_host, | |
| int dir_in) | |
| { | |
| u16 type = 0; | |
| u16 bfre = 0; | |
| u16 dblb = 0; | |
| u16 cntmd = 0; | |
| u16 dir = 0; | |
| u16 epnum = 0; | |
| u16 shtnak = 0; | |
| u16 type_array[] = { | |
| [USB_ENDPOINT_XFER_BULK] = TYPE_BULK, | |
| [USB_ENDPOINT_XFER_INT] = TYPE_INT, | |
| [USB_ENDPOINT_XFER_ISOC] = TYPE_ISO, | |
| }; | |
| int is_double = usbhsp_possible_double_buffer(pipe); | |
| if (usbhs_pipe_is_dcp(pipe)) | |
| return -EINVAL; | |
| /* | |
| * PIPECFG | |
| * | |
| * see | |
| * - "Register Descriptions" - "PIPECFG" register | |
| * - "Features" - "Pipe configuration" | |
| * - "Operation" - "Pipe Control" | |
| */ | |
| /* TYPE */ | |
| type = type_array[usbhs_pipe_type(pipe)]; | |
| /* BFRE */ | |
| if (usbhs_pipe_type_is(pipe, USB_ENDPOINT_XFER_ISOC) || | |
| usbhs_pipe_type_is(pipe, USB_ENDPOINT_XFER_BULK)) | |
| bfre = 0; /* FIXME */ | |
| /* DBLB */ | |
| if (usbhs_pipe_type_is(pipe, USB_ENDPOINT_XFER_ISOC) || | |
| usbhs_pipe_type_is(pipe, USB_ENDPOINT_XFER_BULK)) | |
| dblb = (is_double) ? DBLB : 0; | |
| /* CNTMD */ | |
| if (usbhs_pipe_type_is(pipe, USB_ENDPOINT_XFER_BULK)) | |
| cntmd = 0; /* FIXME */ | |
| /* DIR */ | |
| if (dir_in) | |
| usbhsp_flags_set(pipe, IS_DIR_HOST); | |
| if (!!is_host ^ !!dir_in) | |
| dir |= DIR_OUT; | |
| if (!dir) | |
| usbhsp_flags_set(pipe, IS_DIR_IN); | |
| /* SHTNAK */ | |
| if (usbhs_pipe_type_is(pipe, USB_ENDPOINT_XFER_BULK) && | |
| !dir) | |
| shtnak = SHTNAK; | |
| /* EPNUM */ | |
| epnum = 0; /* see usbhs_pipe_config_update() */ | |
| return type | | |
| bfre | | |
| dblb | | |
| cntmd | | |
| dir | | |
| shtnak | | |
| epnum; | |
| } | |
| static u16 usbhsp_setup_pipebuff(struct usbhs_pipe *pipe) | |
| { | |
| struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe); | |
| struct usbhs_pipe_info *info = usbhs_priv_to_pipeinfo(priv); | |
| struct device *dev = usbhs_priv_to_dev(priv); | |
| int pipe_num = usbhs_pipe_number(pipe); | |
| int is_double = usbhsp_possible_double_buffer(pipe); | |
| u16 buff_size; | |
| u16 bufnmb; | |
| u16 bufnmb_cnt; | |
| /* | |
| * PIPEBUF | |
| * | |
| * see | |
| * - "Register Descriptions" - "PIPEBUF" register | |
| * - "Features" - "Pipe configuration" | |
| * - "Operation" - "FIFO Buffer Memory" | |
| * - "Operation" - "Pipe Control" | |
| * | |
| * ex) if pipe6 - pipe9 are USB_ENDPOINT_XFER_INT (SH7724) | |
| * | |
| * BUFNMB: PIPE | |
| * 0: pipe0 (DCP 256byte) | |
| * 1: - | |
| * 2: - | |
| * 3: - | |
| * 4: pipe6 (INT 64byte) | |
| * 5: pipe7 (INT 64byte) | |
| * 6: pipe8 (INT 64byte) | |
| * 7: pipe9 (INT 64byte) | |
| * 8 - xx: free (for BULK, ISOC) | |
| */ | |
| /* | |
| * FIXME | |
| * | |
| * it doesn't have good buffer allocator | |
| * | |
| * DCP : 256 byte | |
| * BULK: 512 byte | |
| * INT : 64 byte | |
| * ISOC: 512 byte | |
| */ | |
| if (usbhs_pipe_type_is(pipe, USB_ENDPOINT_XFER_CONTROL)) | |
| buff_size = 256; | |
| else if (usbhs_pipe_type_is(pipe, USB_ENDPOINT_XFER_INT)) | |
| buff_size = 64; | |
| else | |
| buff_size = 512; | |
| /* change buff_size to register value */ | |
| bufnmb_cnt = (buff_size / 64) - 1; | |
| /* BUFNMB has been reserved for INT pipe | |
| * see above */ | |
| if (usbhs_pipe_type_is(pipe, USB_ENDPOINT_XFER_INT)) { | |
| bufnmb = pipe_num - 2; | |
| } else { | |
| bufnmb = info->bufnmb_last; | |
| info->bufnmb_last += bufnmb_cnt + 1; | |
| /* | |
| * double buffer | |
| */ | |
| if (is_double) | |
| info->bufnmb_last += bufnmb_cnt + 1; | |
| } | |
| dev_dbg(dev, "pipe : %d : buff_size 0x%x: bufnmb 0x%x\n", | |
| pipe_num, buff_size, bufnmb); | |
| return (0x1f & bufnmb_cnt) << 10 | | |
| (0xff & bufnmb) << 0; | |
| } | |
| void usbhs_pipe_config_update(struct usbhs_pipe *pipe, u16 devsel, | |
| u16 epnum, u16 maxp) | |
| { | |
| if (devsel > 0xA) { | |
| struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe); | |
| struct device *dev = usbhs_priv_to_dev(priv); | |
| dev_err(dev, "devsel error %d\n", devsel); | |
| devsel = 0; | |
| } | |
| usbhsp_pipe_barrier(pipe); | |
| pipe->maxp = maxp; | |
| usbhsp_pipe_select(pipe); | |
| usbhsp_pipe_maxp_set(pipe, 0xFFFF, | |
| (devsel << 12) | | |
| maxp); | |
| if (!usbhs_pipe_is_dcp(pipe)) | |
| usbhsp_pipe_cfg_set(pipe, 0x000F, epnum); | |
| } | |
| /* | |
| * pipe control | |
| */ | |
| int usbhs_pipe_get_maxpacket(struct usbhs_pipe *pipe) | |
| { | |
| /* | |
| * see | |
| * usbhs_pipe_config_update() | |
| * usbhs_dcp_malloc() | |
| */ | |
| return pipe->maxp; | |
| } | |
| int usbhs_pipe_is_dir_in(struct usbhs_pipe *pipe) | |
| { | |
| return usbhsp_flags_has(pipe, IS_DIR_IN); | |
| } | |
| int usbhs_pipe_is_dir_host(struct usbhs_pipe *pipe) | |
| { | |
| return usbhsp_flags_has(pipe, IS_DIR_HOST); | |
| } | |
| int usbhs_pipe_is_running(struct usbhs_pipe *pipe) | |
| { | |
| return usbhsp_flags_has(pipe, IS_RUNNING); | |
| } | |
| void usbhs_pipe_running(struct usbhs_pipe *pipe, int running) | |
| { | |
| if (running) | |
| usbhsp_flags_set(pipe, IS_RUNNING); | |
| else | |
| usbhsp_flags_clr(pipe, IS_RUNNING); | |
| } | |
| void usbhs_pipe_data_sequence(struct usbhs_pipe *pipe, int sequence) | |
| { | |
| u16 mask = (SQCLR | SQSET); | |
| u16 val; | |
| /* | |
| * sequence | |
| * 0 : data0 | |
| * 1 : data1 | |
| * -1 : no change | |
| */ | |
| switch (sequence) { | |
| case 0: | |
| val = SQCLR; | |
| break; | |
| case 1: | |
| val = SQSET; | |
| break; | |
| default: | |
| return; | |
| } | |
| usbhsp_pipectrl_set(pipe, mask, val); | |
| } | |
| static int usbhs_pipe_get_data_sequence(struct usbhs_pipe *pipe) | |
| { | |
| return !!(usbhsp_pipectrl_get(pipe) & SQMON); | |
| } | |
| void usbhs_pipe_clear(struct usbhs_pipe *pipe) | |
| { | |
| if (usbhs_pipe_is_dcp(pipe)) { | |
| usbhs_fifo_clear_dcp(pipe); | |
| } else { | |
| usbhsp_pipectrl_set(pipe, ACLRM, ACLRM); | |
| usbhsp_pipectrl_set(pipe, ACLRM, 0); | |
| } | |
| } | |
| void usbhs_pipe_config_change_bfre(struct usbhs_pipe *pipe, int enable) | |
| { | |
| int sequence; | |
| if (usbhs_pipe_is_dcp(pipe)) | |
| return; | |
| usbhsp_pipe_select(pipe); | |
| /* check if the driver needs to change the BFRE value */ | |
| if (!(enable ^ !!(usbhsp_pipe_cfg_get(pipe) & BFRE))) | |
| return; | |
| sequence = usbhs_pipe_get_data_sequence(pipe); | |
| usbhsp_pipe_cfg_set(pipe, BFRE, enable ? BFRE : 0); | |
| usbhs_pipe_clear(pipe); | |
| usbhs_pipe_data_sequence(pipe, sequence); | |
| } | |
| static struct usbhs_pipe *usbhsp_get_pipe(struct usbhs_priv *priv, u32 type) | |
| { | |
| struct usbhs_pipe *pos, *pipe; | |
| int i; | |
| /* | |
| * find target pipe | |
| */ | |
| pipe = NULL; | |
| usbhs_for_each_pipe_with_dcp(pos, priv, i) { | |
| if (!usbhs_pipe_type_is(pos, type)) | |
| continue; | |
| if (usbhsp_flags_has(pos, IS_USED)) | |
| continue; | |
| pipe = pos; | |
| break; | |
| } | |
| if (!pipe) | |
| return NULL; | |
| /* | |
| * initialize pipe flags | |
| */ | |
| usbhsp_flags_init(pipe); | |
| usbhsp_flags_set(pipe, IS_USED); | |
| return pipe; | |
| } | |
| static void usbhsp_put_pipe(struct usbhs_pipe *pipe) | |
| { | |
| usbhsp_flags_init(pipe); | |
| } | |
| void usbhs_pipe_init(struct usbhs_priv *priv, | |
| int (*dma_map_ctrl)(struct usbhs_pkt *pkt, int map)) | |
| { | |
| struct usbhs_pipe_info *info = usbhs_priv_to_pipeinfo(priv); | |
| struct usbhs_pipe *pipe; | |
| int i; | |
| /* | |
| * FIXME | |
| * | |
| * driver needs good allocator. | |
| * | |
| * find first free buffer area (BULK, ISOC) | |
| * (DCP, INT area is fixed) | |
| * | |
| * buffer number 0 - 3 have been reserved for DCP | |
| * see | |
| * usbhsp_to_bufnmb | |
| */ | |
| info->bufnmb_last = 4; | |
| usbhs_for_each_pipe_with_dcp(pipe, priv, i) { | |
| if (usbhs_pipe_type_is(pipe, USB_ENDPOINT_XFER_INT)) | |
| info->bufnmb_last++; | |
| usbhsp_flags_init(pipe); | |
| pipe->fifo = NULL; | |
| pipe->mod_private = NULL; | |
| INIT_LIST_HEAD(&pipe->list); | |
| /* pipe force init */ | |
| usbhs_pipe_clear(pipe); | |
| } | |
| info->dma_map_ctrl = dma_map_ctrl; | |
| } | |
| struct usbhs_pipe *usbhs_pipe_malloc(struct usbhs_priv *priv, | |
| int endpoint_type, | |
| int dir_in) | |
| { | |
| struct device *dev = usbhs_priv_to_dev(priv); | |
| struct usbhs_pipe *pipe; | |
| int is_host = usbhs_mod_is_host(priv); | |
| int ret; | |
| u16 pipecfg, pipebuf; | |
| pipe = usbhsp_get_pipe(priv, endpoint_type); | |
| if (!pipe) { | |
| dev_err(dev, "can't get pipe (%s)\n", | |
| usbhsp_pipe_name[endpoint_type]); | |
| return NULL; | |
| } | |
| INIT_LIST_HEAD(&pipe->list); | |
| usbhs_pipe_disable(pipe); | |
| /* make sure pipe is not busy */ | |
| ret = usbhsp_pipe_barrier(pipe); | |
| if (ret < 0) { | |
| dev_err(dev, "pipe setup failed %d\n", usbhs_pipe_number(pipe)); | |
| return NULL; | |
| } | |
| pipecfg = usbhsp_setup_pipecfg(pipe, is_host, dir_in); | |
| pipebuf = usbhsp_setup_pipebuff(pipe); | |
| usbhsp_pipe_select(pipe); | |
| usbhsp_pipe_cfg_set(pipe, 0xFFFF, pipecfg); | |
| usbhsp_pipe_buf_set(pipe, 0xFFFF, pipebuf); | |
| usbhs_pipe_clear(pipe); | |
| usbhs_pipe_sequence_data0(pipe); | |
| dev_dbg(dev, "enable pipe %d : %s (%s)\n", | |
| usbhs_pipe_number(pipe), | |
| usbhs_pipe_name(pipe), | |
| usbhs_pipe_is_dir_in(pipe) ? "in" : "out"); | |
| /* | |
| * epnum / maxp are still not set to this pipe. | |
| * call usbhs_pipe_config_update() after this function !! | |
| */ | |
| return pipe; | |
| } | |
| void usbhs_pipe_free(struct usbhs_pipe *pipe) | |
| { | |
| usbhsp_put_pipe(pipe); | |
| } | |
| void usbhs_pipe_select_fifo(struct usbhs_pipe *pipe, struct usbhs_fifo *fifo) | |
| { | |
| if (pipe->fifo) | |
| pipe->fifo->pipe = NULL; | |
| pipe->fifo = fifo; | |
| if (fifo) | |
| fifo->pipe = pipe; | |
| } | |
| /* | |
| * dcp control | |
| */ | |
| struct usbhs_pipe *usbhs_dcp_malloc(struct usbhs_priv *priv) | |
| { | |
| struct usbhs_pipe *pipe; | |
| pipe = usbhsp_get_pipe(priv, USB_ENDPOINT_XFER_CONTROL); | |
| if (!pipe) | |
| return NULL; | |
| INIT_LIST_HEAD(&pipe->list); | |
| /* | |
| * call usbhs_pipe_config_update() after this function !! | |
| */ | |
| return pipe; | |
| } | |
| void usbhs_dcp_control_transfer_done(struct usbhs_pipe *pipe) | |
| { | |
| struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe); | |
| WARN_ON(!usbhs_pipe_is_dcp(pipe)); | |
| usbhs_pipe_enable(pipe); | |
| if (!usbhs_mod_is_host(priv)) /* funconly */ | |
| usbhsp_pipectrl_set(pipe, CCPL, CCPL); | |
| } | |
| void usbhs_dcp_dir_for_host(struct usbhs_pipe *pipe, int dir_out) | |
| { | |
| usbhsp_pipe_cfg_set(pipe, DIR_OUT, | |
| dir_out ? DIR_OUT : 0); | |
| } | |
| /* | |
| * pipe module function | |
| */ | |
| int usbhs_pipe_probe(struct usbhs_priv *priv) | |
| { | |
| struct usbhs_pipe_info *info = usbhs_priv_to_pipeinfo(priv); | |
| struct usbhs_pipe *pipe; | |
| struct device *dev = usbhs_priv_to_dev(priv); | |
| u32 *pipe_type = usbhs_get_dparam(priv, pipe_type); | |
| int pipe_size = usbhs_get_dparam(priv, pipe_size); | |
| int i; | |
| /* This driver expects 1st pipe is DCP */ | |
| if (pipe_type[0] != USB_ENDPOINT_XFER_CONTROL) { | |
| dev_err(dev, "1st PIPE is not DCP\n"); | |
| return -EINVAL; | |
| } | |
| info->pipe = kzalloc(sizeof(struct usbhs_pipe) * pipe_size, GFP_KERNEL); | |
| if (!info->pipe) { | |
| dev_err(dev, "Could not allocate pipe\n"); | |
| return -ENOMEM; | |
| } | |
| info->size = pipe_size; | |
| /* | |
| * init pipe | |
| */ | |
| usbhs_for_each_pipe_with_dcp(pipe, priv, i) { | |
| pipe->priv = priv; | |
| usbhs_pipe_type(pipe) = | |
| pipe_type[i] & USB_ENDPOINT_XFERTYPE_MASK; | |
| dev_dbg(dev, "pipe %x\t: %s\n", | |
| i, usbhsp_pipe_name[pipe_type[i]]); | |
| } | |
| return 0; | |
| } | |
| void usbhs_pipe_remove(struct usbhs_priv *priv) | |
| { | |
| struct usbhs_pipe_info *info = usbhs_priv_to_pipeinfo(priv); | |
| kfree(info->pipe); | |
| } |