| /* | |
| * Virtio PCI driver - modern (virtio 1.0) device support | |
| * | |
| * This module allows virtio devices to be used over a virtual PCI device. | |
| * This can be used with QEMU based VMMs like KVM or Xen. | |
| * | |
| * Copyright IBM Corp. 2007 | |
| * Copyright Red Hat, Inc. 2014 | |
| * | |
| * Authors: | |
| * Anthony Liguori <aliguori@us.ibm.com> | |
| * Rusty Russell <rusty@rustcorp.com.au> | |
| * Michael S. Tsirkin <mst@redhat.com> | |
| * | |
| * This work is licensed under the terms of the GNU GPL, version 2 or later. | |
| * See the COPYING file in the top-level directory. | |
| * | |
| */ | |
| #define VIRTIO_PCI_NO_LEGACY | |
| #include "virtio_pci_common.h" | |
| /* | |
| * Type-safe wrappers for io accesses. | |
| * Use these to enforce at compile time the following spec requirement: | |
| * | |
| * The driver MUST access each field using the “natural” access | |
| * method, i.e. 32-bit accesses for 32-bit fields, 16-bit accesses | |
| * for 16-bit fields and 8-bit accesses for 8-bit fields. | |
| */ | |
| static inline u8 vp_ioread8(u8 __iomem *addr) | |
| { | |
| return ioread8(addr); | |
| } | |
| static inline u16 vp_ioread16 (u16 __iomem *addr) | |
| { | |
| return ioread16(addr); | |
| } | |
| static inline u32 vp_ioread32(u32 __iomem *addr) | |
| { | |
| return ioread32(addr); | |
| } | |
| static inline void vp_iowrite8(u8 value, u8 __iomem *addr) | |
| { | |
| iowrite8(value, addr); | |
| } | |
| static inline void vp_iowrite16(u16 value, u16 __iomem *addr) | |
| { | |
| iowrite16(value, addr); | |
| } | |
| static inline void vp_iowrite32(u32 value, u32 __iomem *addr) | |
| { | |
| iowrite32(value, addr); | |
| } | |
| static void vp_iowrite64_twopart(u64 val, | |
| __le32 __iomem *lo, __le32 __iomem *hi) | |
| { | |
| vp_iowrite32((u32)val, lo); | |
| vp_iowrite32(val >> 32, hi); | |
| } | |
| static void __iomem *map_capability(struct pci_dev *dev, int off, | |
| size_t minlen, | |
| u32 align, | |
| u32 start, u32 size, | |
| size_t *len) | |
| { | |
| u8 bar; | |
| u32 offset, length; | |
| void __iomem *p; | |
| pci_read_config_byte(dev, off + offsetof(struct virtio_pci_cap, | |
| bar), | |
| &bar); | |
| pci_read_config_dword(dev, off + offsetof(struct virtio_pci_cap, offset), | |
| &offset); | |
| pci_read_config_dword(dev, off + offsetof(struct virtio_pci_cap, length), | |
| &length); | |
| if (length <= start) { | |
| dev_err(&dev->dev, | |
| "virtio_pci: bad capability len %u (>%u expected)\n", | |
| length, start); | |
| return NULL; | |
| } | |
| if (length - start < minlen) { | |
| dev_err(&dev->dev, | |
| "virtio_pci: bad capability len %u (>=%zu expected)\n", | |
| length, minlen); | |
| return NULL; | |
| } | |
| length -= start; | |
| if (start + offset < offset) { | |
| dev_err(&dev->dev, | |
| "virtio_pci: map wrap-around %u+%u\n", | |
| start, offset); | |
| return NULL; | |
| } | |
| offset += start; | |
| if (offset & (align - 1)) { | |
| dev_err(&dev->dev, | |
| "virtio_pci: offset %u not aligned to %u\n", | |
| offset, align); | |
| return NULL; | |
| } | |
| if (length > size) | |
| length = size; | |
| if (len) | |
| *len = length; | |
| if (minlen + offset < minlen || | |
| minlen + offset > pci_resource_len(dev, bar)) { | |
| dev_err(&dev->dev, | |
| "virtio_pci: map virtio %zu@%u " | |
| "out of range on bar %i length %lu\n", | |
| minlen, offset, | |
| bar, (unsigned long)pci_resource_len(dev, bar)); | |
| return NULL; | |
| } | |
| p = pci_iomap_range(dev, bar, offset, length); | |
| if (!p) | |
| dev_err(&dev->dev, | |
| "virtio_pci: unable to map virtio %u@%u on bar %i\n", | |
| length, offset, bar); | |
| return p; | |
| } | |
| /* virtio config->get_features() implementation */ | |
| static u64 vp_get_features(struct virtio_device *vdev) | |
| { | |
| struct virtio_pci_device *vp_dev = to_vp_device(vdev); | |
| u64 features; | |
| vp_iowrite32(0, &vp_dev->common->device_feature_select); | |
| features = vp_ioread32(&vp_dev->common->device_feature); | |
| vp_iowrite32(1, &vp_dev->common->device_feature_select); | |
| features |= ((u64)vp_ioread32(&vp_dev->common->device_feature) << 32); | |
| return features; | |
| } | |
| /* virtio config->finalize_features() implementation */ | |
| static int vp_finalize_features(struct virtio_device *vdev) | |
| { | |
| struct virtio_pci_device *vp_dev = to_vp_device(vdev); | |
| /* Give virtio_ring a chance to accept features. */ | |
| vring_transport_features(vdev); | |
| if (!__virtio_test_bit(vdev, VIRTIO_F_VERSION_1)) { | |
| dev_err(&vdev->dev, "virtio: device uses modern interface " | |
| "but does not have VIRTIO_F_VERSION_1\n"); | |
| return -EINVAL; | |
| } | |
| vp_iowrite32(0, &vp_dev->common->guest_feature_select); | |
| vp_iowrite32((u32)vdev->features, &vp_dev->common->guest_feature); | |
| vp_iowrite32(1, &vp_dev->common->guest_feature_select); | |
| vp_iowrite32(vdev->features >> 32, &vp_dev->common->guest_feature); | |
| return 0; | |
| } | |
| /* virtio config->get() implementation */ | |
| static void vp_get(struct virtio_device *vdev, unsigned offset, | |
| void *buf, unsigned len) | |
| { | |
| struct virtio_pci_device *vp_dev = to_vp_device(vdev); | |
| u8 b; | |
| __le16 w; | |
| __le32 l; | |
| BUG_ON(offset + len > vp_dev->device_len); | |
| switch (len) { | |
| case 1: | |
| b = ioread8(vp_dev->device + offset); | |
| memcpy(buf, &b, sizeof b); | |
| break; | |
| case 2: | |
| w = cpu_to_le16(ioread16(vp_dev->device + offset)); | |
| memcpy(buf, &w, sizeof w); | |
| break; | |
| case 4: | |
| l = cpu_to_le32(ioread32(vp_dev->device + offset)); | |
| memcpy(buf, &l, sizeof l); | |
| break; | |
| case 8: | |
| l = cpu_to_le32(ioread32(vp_dev->device + offset)); | |
| memcpy(buf, &l, sizeof l); | |
| l = cpu_to_le32(ioread32(vp_dev->device + offset + sizeof l)); | |
| memcpy(buf + sizeof l, &l, sizeof l); | |
| break; | |
| default: | |
| BUG(); | |
| } | |
| } | |
| /* the config->set() implementation. it's symmetric to the config->get() | |
| * implementation */ | |
| static void vp_set(struct virtio_device *vdev, unsigned offset, | |
| const void *buf, unsigned len) | |
| { | |
| struct virtio_pci_device *vp_dev = to_vp_device(vdev); | |
| u8 b; | |
| __le16 w; | |
| __le32 l; | |
| BUG_ON(offset + len > vp_dev->device_len); | |
| switch (len) { | |
| case 1: | |
| memcpy(&b, buf, sizeof b); | |
| iowrite8(b, vp_dev->device + offset); | |
| break; | |
| case 2: | |
| memcpy(&w, buf, sizeof w); | |
| iowrite16(le16_to_cpu(w), vp_dev->device + offset); | |
| break; | |
| case 4: | |
| memcpy(&l, buf, sizeof l); | |
| iowrite32(le32_to_cpu(l), vp_dev->device + offset); | |
| break; | |
| case 8: | |
| memcpy(&l, buf, sizeof l); | |
| iowrite32(le32_to_cpu(l), vp_dev->device + offset); | |
| memcpy(&l, buf + sizeof l, sizeof l); | |
| iowrite32(le32_to_cpu(l), vp_dev->device + offset + sizeof l); | |
| break; | |
| default: | |
| BUG(); | |
| } | |
| } | |
| static u32 vp_generation(struct virtio_device *vdev) | |
| { | |
| struct virtio_pci_device *vp_dev = to_vp_device(vdev); | |
| return vp_ioread8(&vp_dev->common->config_generation); | |
| } | |
| /* config->{get,set}_status() implementations */ | |
| static u8 vp_get_status(struct virtio_device *vdev) | |
| { | |
| struct virtio_pci_device *vp_dev = to_vp_device(vdev); | |
| return vp_ioread8(&vp_dev->common->device_status); | |
| } | |
| static void vp_set_status(struct virtio_device *vdev, u8 status) | |
| { | |
| struct virtio_pci_device *vp_dev = to_vp_device(vdev); | |
| /* We should never be setting status to 0. */ | |
| BUG_ON(status == 0); | |
| vp_iowrite8(status, &vp_dev->common->device_status); | |
| } | |
| static void vp_reset(struct virtio_device *vdev) | |
| { | |
| struct virtio_pci_device *vp_dev = to_vp_device(vdev); | |
| /* 0 status means a reset. */ | |
| vp_iowrite8(0, &vp_dev->common->device_status); | |
| /* Flush out the status write, and flush in device writes, | |
| * including MSI-X interrupts, if any. */ | |
| vp_ioread8(&vp_dev->common->device_status); | |
| /* Flush pending VQ/configuration callbacks. */ | |
| vp_synchronize_vectors(vdev); | |
| } | |
| static u16 vp_config_vector(struct virtio_pci_device *vp_dev, u16 vector) | |
| { | |
| /* Setup the vector used for configuration events */ | |
| vp_iowrite16(vector, &vp_dev->common->msix_config); | |
| /* Verify we had enough resources to assign the vector */ | |
| /* Will also flush the write out to device */ | |
| return vp_ioread16(&vp_dev->common->msix_config); | |
| } | |
| static size_t vring_pci_size(u16 num) | |
| { | |
| /* We only need a cacheline separation. */ | |
| return PAGE_ALIGN(vring_size(num, SMP_CACHE_BYTES)); | |
| } | |
| static void *alloc_virtqueue_pages(int *num) | |
| { | |
| void *pages; | |
| /* TODO: allocate each queue chunk individually */ | |
| for (; *num && vring_pci_size(*num) > PAGE_SIZE; *num /= 2) { | |
| pages = alloc_pages_exact(vring_pci_size(*num), | |
| GFP_KERNEL|__GFP_ZERO|__GFP_NOWARN); | |
| if (pages) | |
| return pages; | |
| } | |
| if (!*num) | |
| return NULL; | |
| /* Try to get a single page. You are my only hope! */ | |
| return alloc_pages_exact(vring_pci_size(*num), GFP_KERNEL|__GFP_ZERO); | |
| } | |
| static struct virtqueue *setup_vq(struct virtio_pci_device *vp_dev, | |
| struct virtio_pci_vq_info *info, | |
| unsigned index, | |
| void (*callback)(struct virtqueue *vq), | |
| const char *name, | |
| u16 msix_vec) | |
| { | |
| struct virtio_pci_common_cfg __iomem *cfg = vp_dev->common; | |
| struct virtqueue *vq; | |
| u16 num, off; | |
| int err; | |
| if (index >= vp_ioread16(&cfg->num_queues)) | |
| return ERR_PTR(-ENOENT); | |
| /* Select the queue we're interested in */ | |
| vp_iowrite16(index, &cfg->queue_select); | |
| /* Check if queue is either not available or already active. */ | |
| num = vp_ioread16(&cfg->queue_size); | |
| if (!num || vp_ioread16(&cfg->queue_enable)) | |
| return ERR_PTR(-ENOENT); | |
| if (num & (num - 1)) { | |
| dev_warn(&vp_dev->pci_dev->dev, "bad queue size %u", num); | |
| return ERR_PTR(-EINVAL); | |
| } | |
| /* get offset of notification word for this vq */ | |
| off = vp_ioread16(&cfg->queue_notify_off); | |
| info->num = num; | |
| info->msix_vector = msix_vec; | |
| info->queue = alloc_virtqueue_pages(&info->num); | |
| if (info->queue == NULL) | |
| return ERR_PTR(-ENOMEM); | |
| /* create the vring */ | |
| vq = vring_new_virtqueue(index, info->num, | |
| SMP_CACHE_BYTES, &vp_dev->vdev, | |
| true, info->queue, vp_notify, callback, name); | |
| if (!vq) { | |
| err = -ENOMEM; | |
| goto err_new_queue; | |
| } | |
| /* activate the queue */ | |
| vp_iowrite16(num, &cfg->queue_size); | |
| vp_iowrite64_twopart(virt_to_phys(info->queue), | |
| &cfg->queue_desc_lo, &cfg->queue_desc_hi); | |
| vp_iowrite64_twopart(virt_to_phys(virtqueue_get_avail(vq)), | |
| &cfg->queue_avail_lo, &cfg->queue_avail_hi); | |
| vp_iowrite64_twopart(virt_to_phys(virtqueue_get_used(vq)), | |
| &cfg->queue_used_lo, &cfg->queue_used_hi); | |
| if (vp_dev->notify_base) { | |
| /* offset should not wrap */ | |
| if ((u64)off * vp_dev->notify_offset_multiplier + 2 | |
| > vp_dev->notify_len) { | |
| dev_warn(&vp_dev->pci_dev->dev, | |
| "bad notification offset %u (x %u) " | |
| "for queue %u > %zd", | |
| off, vp_dev->notify_offset_multiplier, | |
| index, vp_dev->notify_len); | |
| err = -EINVAL; | |
| goto err_map_notify; | |
| } | |
| vq->priv = (void __force *)vp_dev->notify_base + | |
| off * vp_dev->notify_offset_multiplier; | |
| } else { | |
| vq->priv = (void __force *)map_capability(vp_dev->pci_dev, | |
| vp_dev->notify_map_cap, 2, 2, | |
| off * vp_dev->notify_offset_multiplier, 2, | |
| NULL); | |
| } | |
| if (!vq->priv) { | |
| err = -ENOMEM; | |
| goto err_map_notify; | |
| } | |
| if (msix_vec != VIRTIO_MSI_NO_VECTOR) { | |
| vp_iowrite16(msix_vec, &cfg->queue_msix_vector); | |
| msix_vec = vp_ioread16(&cfg->queue_msix_vector); | |
| if (msix_vec == VIRTIO_MSI_NO_VECTOR) { | |
| err = -EBUSY; | |
| goto err_assign_vector; | |
| } | |
| } | |
| return vq; | |
| err_assign_vector: | |
| if (!vp_dev->notify_base) | |
| pci_iounmap(vp_dev->pci_dev, (void __iomem __force *)vq->priv); | |
| err_map_notify: | |
| vring_del_virtqueue(vq); | |
| err_new_queue: | |
| free_pages_exact(info->queue, vring_pci_size(info->num)); | |
| return ERR_PTR(err); | |
| } | |
| static int vp_modern_find_vqs(struct virtio_device *vdev, unsigned nvqs, | |
| struct virtqueue *vqs[], | |
| vq_callback_t *callbacks[], | |
| const char *names[]) | |
| { | |
| struct virtio_pci_device *vp_dev = to_vp_device(vdev); | |
| struct virtqueue *vq; | |
| int rc = vp_find_vqs(vdev, nvqs, vqs, callbacks, names); | |
| if (rc) | |
| return rc; | |
| /* Select and activate all queues. Has to be done last: once we do | |
| * this, there's no way to go back except reset. | |
| */ | |
| list_for_each_entry(vq, &vdev->vqs, list) { | |
| vp_iowrite16(vq->index, &vp_dev->common->queue_select); | |
| vp_iowrite16(1, &vp_dev->common->queue_enable); | |
| } | |
| return 0; | |
| } | |
| static void del_vq(struct virtio_pci_vq_info *info) | |
| { | |
| struct virtqueue *vq = info->vq; | |
| struct virtio_pci_device *vp_dev = to_vp_device(vq->vdev); | |
| vp_iowrite16(vq->index, &vp_dev->common->queue_select); | |
| if (vp_dev->msix_enabled) { | |
| vp_iowrite16(VIRTIO_MSI_NO_VECTOR, | |
| &vp_dev->common->queue_msix_vector); | |
| /* Flush the write out to device */ | |
| vp_ioread16(&vp_dev->common->queue_msix_vector); | |
| } | |
| if (!vp_dev->notify_base) | |
| pci_iounmap(vp_dev->pci_dev, (void __force __iomem *)vq->priv); | |
| vring_del_virtqueue(vq); | |
| free_pages_exact(info->queue, vring_pci_size(info->num)); | |
| } | |
| static const struct virtio_config_ops virtio_pci_config_nodev_ops = { | |
| .get = NULL, | |
| .set = NULL, | |
| .generation = vp_generation, | |
| .get_status = vp_get_status, | |
| .set_status = vp_set_status, | |
| .reset = vp_reset, | |
| .find_vqs = vp_modern_find_vqs, | |
| .del_vqs = vp_del_vqs, | |
| .get_features = vp_get_features, | |
| .finalize_features = vp_finalize_features, | |
| .bus_name = vp_bus_name, | |
| .set_vq_affinity = vp_set_vq_affinity, | |
| }; | |
| static const struct virtio_config_ops virtio_pci_config_ops = { | |
| .get = vp_get, | |
| .set = vp_set, | |
| .generation = vp_generation, | |
| .get_status = vp_get_status, | |
| .set_status = vp_set_status, | |
| .reset = vp_reset, | |
| .find_vqs = vp_modern_find_vqs, | |
| .del_vqs = vp_del_vqs, | |
| .get_features = vp_get_features, | |
| .finalize_features = vp_finalize_features, | |
| .bus_name = vp_bus_name, | |
| .set_vq_affinity = vp_set_vq_affinity, | |
| }; | |
| /** | |
| * virtio_pci_find_capability - walk capabilities to find device info. | |
| * @dev: the pci device | |
| * @cfg_type: the VIRTIO_PCI_CAP_* value we seek | |
| * @ioresource_types: IORESOURCE_MEM and/or IORESOURCE_IO. | |
| * | |
| * Returns offset of the capability, or 0. | |
| */ | |
| static inline int virtio_pci_find_capability(struct pci_dev *dev, u8 cfg_type, | |
| u32 ioresource_types, int *bars) | |
| { | |
| int pos; | |
| for (pos = pci_find_capability(dev, PCI_CAP_ID_VNDR); | |
| pos > 0; | |
| pos = pci_find_next_capability(dev, pos, PCI_CAP_ID_VNDR)) { | |
| u8 type, bar; | |
| pci_read_config_byte(dev, pos + offsetof(struct virtio_pci_cap, | |
| cfg_type), | |
| &type); | |
| pci_read_config_byte(dev, pos + offsetof(struct virtio_pci_cap, | |
| bar), | |
| &bar); | |
| /* Ignore structures with reserved BAR values */ | |
| if (bar > 0x5) | |
| continue; | |
| if (type == cfg_type) { | |
| if (pci_resource_len(dev, bar) && | |
| pci_resource_flags(dev, bar) & ioresource_types) { | |
| *bars |= (1 << bar); | |
| return pos; | |
| } | |
| } | |
| } | |
| return 0; | |
| } | |
| /* This is part of the ABI. Don't screw with it. */ | |
| static inline void check_offsets(void) | |
| { | |
| /* Note: disk space was harmed in compilation of this function. */ | |
| BUILD_BUG_ON(VIRTIO_PCI_CAP_VNDR != | |
| offsetof(struct virtio_pci_cap, cap_vndr)); | |
| BUILD_BUG_ON(VIRTIO_PCI_CAP_NEXT != | |
| offsetof(struct virtio_pci_cap, cap_next)); | |
| BUILD_BUG_ON(VIRTIO_PCI_CAP_LEN != | |
| offsetof(struct virtio_pci_cap, cap_len)); | |
| BUILD_BUG_ON(VIRTIO_PCI_CAP_CFG_TYPE != | |
| offsetof(struct virtio_pci_cap, cfg_type)); | |
| BUILD_BUG_ON(VIRTIO_PCI_CAP_BAR != | |
| offsetof(struct virtio_pci_cap, bar)); | |
| BUILD_BUG_ON(VIRTIO_PCI_CAP_OFFSET != | |
| offsetof(struct virtio_pci_cap, offset)); | |
| BUILD_BUG_ON(VIRTIO_PCI_CAP_LENGTH != | |
| offsetof(struct virtio_pci_cap, length)); | |
| BUILD_BUG_ON(VIRTIO_PCI_NOTIFY_CAP_MULT != | |
| offsetof(struct virtio_pci_notify_cap, | |
| notify_off_multiplier)); | |
| BUILD_BUG_ON(VIRTIO_PCI_COMMON_DFSELECT != | |
| offsetof(struct virtio_pci_common_cfg, | |
| device_feature_select)); | |
| BUILD_BUG_ON(VIRTIO_PCI_COMMON_DF != | |
| offsetof(struct virtio_pci_common_cfg, device_feature)); | |
| BUILD_BUG_ON(VIRTIO_PCI_COMMON_GFSELECT != | |
| offsetof(struct virtio_pci_common_cfg, | |
| guest_feature_select)); | |
| BUILD_BUG_ON(VIRTIO_PCI_COMMON_GF != | |
| offsetof(struct virtio_pci_common_cfg, guest_feature)); | |
| BUILD_BUG_ON(VIRTIO_PCI_COMMON_MSIX != | |
| offsetof(struct virtio_pci_common_cfg, msix_config)); | |
| BUILD_BUG_ON(VIRTIO_PCI_COMMON_NUMQ != | |
| offsetof(struct virtio_pci_common_cfg, num_queues)); | |
| BUILD_BUG_ON(VIRTIO_PCI_COMMON_STATUS != | |
| offsetof(struct virtio_pci_common_cfg, device_status)); | |
| BUILD_BUG_ON(VIRTIO_PCI_COMMON_CFGGENERATION != | |
| offsetof(struct virtio_pci_common_cfg, config_generation)); | |
| BUILD_BUG_ON(VIRTIO_PCI_COMMON_Q_SELECT != | |
| offsetof(struct virtio_pci_common_cfg, queue_select)); | |
| BUILD_BUG_ON(VIRTIO_PCI_COMMON_Q_SIZE != | |
| offsetof(struct virtio_pci_common_cfg, queue_size)); | |
| BUILD_BUG_ON(VIRTIO_PCI_COMMON_Q_MSIX != | |
| offsetof(struct virtio_pci_common_cfg, queue_msix_vector)); | |
| BUILD_BUG_ON(VIRTIO_PCI_COMMON_Q_ENABLE != | |
| offsetof(struct virtio_pci_common_cfg, queue_enable)); | |
| BUILD_BUG_ON(VIRTIO_PCI_COMMON_Q_NOFF != | |
| offsetof(struct virtio_pci_common_cfg, queue_notify_off)); | |
| BUILD_BUG_ON(VIRTIO_PCI_COMMON_Q_DESCLO != | |
| offsetof(struct virtio_pci_common_cfg, queue_desc_lo)); | |
| BUILD_BUG_ON(VIRTIO_PCI_COMMON_Q_DESCHI != | |
| offsetof(struct virtio_pci_common_cfg, queue_desc_hi)); | |
| BUILD_BUG_ON(VIRTIO_PCI_COMMON_Q_AVAILLO != | |
| offsetof(struct virtio_pci_common_cfg, queue_avail_lo)); | |
| BUILD_BUG_ON(VIRTIO_PCI_COMMON_Q_AVAILHI != | |
| offsetof(struct virtio_pci_common_cfg, queue_avail_hi)); | |
| BUILD_BUG_ON(VIRTIO_PCI_COMMON_Q_USEDLO != | |
| offsetof(struct virtio_pci_common_cfg, queue_used_lo)); | |
| BUILD_BUG_ON(VIRTIO_PCI_COMMON_Q_USEDHI != | |
| offsetof(struct virtio_pci_common_cfg, queue_used_hi)); | |
| } | |
| /* the PCI probing function */ | |
| int virtio_pci_modern_probe(struct virtio_pci_device *vp_dev) | |
| { | |
| struct pci_dev *pci_dev = vp_dev->pci_dev; | |
| int err, common, isr, notify, device; | |
| u32 notify_length; | |
| u32 notify_offset; | |
| check_offsets(); | |
| /* We only own devices >= 0x1000 and <= 0x107f: leave the rest. */ | |
| if (pci_dev->device < 0x1000 || pci_dev->device > 0x107f) | |
| return -ENODEV; | |
| if (pci_dev->device < 0x1040) { | |
| /* Transitional devices: use the PCI subsystem device id as | |
| * virtio device id, same as legacy driver always did. | |
| */ | |
| vp_dev->vdev.id.device = pci_dev->subsystem_device; | |
| } else { | |
| /* Modern devices: simply use PCI device id, but start from 0x1040. */ | |
| vp_dev->vdev.id.device = pci_dev->device - 0x1040; | |
| } | |
| vp_dev->vdev.id.vendor = pci_dev->subsystem_vendor; | |
| /* check for a common config: if not, use legacy mode (bar 0). */ | |
| common = virtio_pci_find_capability(pci_dev, VIRTIO_PCI_CAP_COMMON_CFG, | |
| IORESOURCE_IO | IORESOURCE_MEM, | |
| &vp_dev->modern_bars); | |
| if (!common) { | |
| dev_info(&pci_dev->dev, | |
| "virtio_pci: leaving for legacy driver\n"); | |
| return -ENODEV; | |
| } | |
| /* If common is there, these should be too... */ | |
| isr = virtio_pci_find_capability(pci_dev, VIRTIO_PCI_CAP_ISR_CFG, | |
| IORESOURCE_IO | IORESOURCE_MEM, | |
| &vp_dev->modern_bars); | |
| notify = virtio_pci_find_capability(pci_dev, VIRTIO_PCI_CAP_NOTIFY_CFG, | |
| IORESOURCE_IO | IORESOURCE_MEM, | |
| &vp_dev->modern_bars); | |
| if (!isr || !notify) { | |
| dev_err(&pci_dev->dev, | |
| "virtio_pci: missing capabilities %i/%i/%i\n", | |
| common, isr, notify); | |
| return -EINVAL; | |
| } | |
| /* Device capability is only mandatory for devices that have | |
| * device-specific configuration. | |
| */ | |
| device = virtio_pci_find_capability(pci_dev, VIRTIO_PCI_CAP_DEVICE_CFG, | |
| IORESOURCE_IO | IORESOURCE_MEM, | |
| &vp_dev->modern_bars); | |
| err = pci_request_selected_regions(pci_dev, vp_dev->modern_bars, | |
| "virtio-pci-modern"); | |
| if (err) | |
| return err; | |
| err = -EINVAL; | |
| vp_dev->common = map_capability(pci_dev, common, | |
| sizeof(struct virtio_pci_common_cfg), 4, | |
| 0, sizeof(struct virtio_pci_common_cfg), | |
| NULL); | |
| if (!vp_dev->common) | |
| goto err_map_common; | |
| vp_dev->isr = map_capability(pci_dev, isr, sizeof(u8), 1, | |
| 0, 1, | |
| NULL); | |
| if (!vp_dev->isr) | |
| goto err_map_isr; | |
| /* Read notify_off_multiplier from config space. */ | |
| pci_read_config_dword(pci_dev, | |
| notify + offsetof(struct virtio_pci_notify_cap, | |
| notify_off_multiplier), | |
| &vp_dev->notify_offset_multiplier); | |
| /* Read notify length and offset from config space. */ | |
| pci_read_config_dword(pci_dev, | |
| notify + offsetof(struct virtio_pci_notify_cap, | |
| cap.length), | |
| ¬ify_length); | |
| pci_read_config_dword(pci_dev, | |
| notify + offsetof(struct virtio_pci_notify_cap, | |
| cap.length), | |
| ¬ify_offset); | |
| /* We don't know how many VQs we'll map, ahead of the time. | |
| * If notify length is small, map it all now. | |
| * Otherwise, map each VQ individually later. | |
| */ | |
| if ((u64)notify_length + (notify_offset % PAGE_SIZE) <= PAGE_SIZE) { | |
| vp_dev->notify_base = map_capability(pci_dev, notify, 2, 2, | |
| 0, notify_length, | |
| &vp_dev->notify_len); | |
| if (!vp_dev->notify_base) | |
| goto err_map_notify; | |
| } else { | |
| vp_dev->notify_map_cap = notify; | |
| } | |
| /* Again, we don't know how much we should map, but PAGE_SIZE | |
| * is more than enough for all existing devices. | |
| */ | |
| if (device) { | |
| vp_dev->device = map_capability(pci_dev, device, 0, 4, | |
| 0, PAGE_SIZE, | |
| &vp_dev->device_len); | |
| if (!vp_dev->device) | |
| goto err_map_device; | |
| vp_dev->vdev.config = &virtio_pci_config_ops; | |
| } else { | |
| vp_dev->vdev.config = &virtio_pci_config_nodev_ops; | |
| } | |
| vp_dev->config_vector = vp_config_vector; | |
| vp_dev->setup_vq = setup_vq; | |
| vp_dev->del_vq = del_vq; | |
| return 0; | |
| err_map_device: | |
| if (vp_dev->notify_base) | |
| pci_iounmap(pci_dev, vp_dev->notify_base); | |
| err_map_notify: | |
| pci_iounmap(pci_dev, vp_dev->isr); | |
| err_map_isr: | |
| pci_iounmap(pci_dev, vp_dev->common); | |
| err_map_common: | |
| return err; | |
| } | |
| void virtio_pci_modern_remove(struct virtio_pci_device *vp_dev) | |
| { | |
| struct pci_dev *pci_dev = vp_dev->pci_dev; | |
| if (vp_dev->device) | |
| pci_iounmap(pci_dev, vp_dev->device); | |
| if (vp_dev->notify_base) | |
| pci_iounmap(pci_dev, vp_dev->notify_base); | |
| pci_iounmap(pci_dev, vp_dev->isr); | |
| pci_iounmap(pci_dev, vp_dev->common); | |
| pci_release_selected_regions(pci_dev, vp_dev->modern_bars); | |
| } |