| /* | |
| * Generic entry point for the idle threads | |
| */ | |
| #include <linux/sched.h> | |
| #include <linux/cpu.h> | |
| #include <linux/cpuidle.h> | |
| #include <linux/tick.h> | |
| #include <linux/mm.h> | |
| #include <linux/stackprotector.h> | |
| #include <linux/suspend.h> | |
| #include <asm/tlb.h> | |
| #include <trace/events/power.h> | |
| #include "sched.h" | |
| /** | |
| * sched_idle_set_state - Record idle state for the current CPU. | |
| * @idle_state: State to record. | |
| */ | |
| void sched_idle_set_state(struct cpuidle_state *idle_state) | |
| { | |
| idle_set_state(this_rq(), idle_state); | |
| } | |
| static int __read_mostly cpu_idle_force_poll; | |
| void cpu_idle_poll_ctrl(bool enable) | |
| { | |
| if (enable) { | |
| cpu_idle_force_poll++; | |
| } else { | |
| cpu_idle_force_poll--; | |
| WARN_ON_ONCE(cpu_idle_force_poll < 0); | |
| } | |
| } | |
| #ifdef CONFIG_GENERIC_IDLE_POLL_SETUP | |
| static int __init cpu_idle_poll_setup(char *__unused) | |
| { | |
| cpu_idle_force_poll = 1; | |
| return 1; | |
| } | |
| __setup("nohlt", cpu_idle_poll_setup); | |
| static int __init cpu_idle_nopoll_setup(char *__unused) | |
| { | |
| cpu_idle_force_poll = 0; | |
| return 1; | |
| } | |
| __setup("hlt", cpu_idle_nopoll_setup); | |
| #endif | |
| static inline int cpu_idle_poll(void) | |
| { | |
| rcu_idle_enter(); | |
| trace_cpu_idle_rcuidle(0, smp_processor_id()); | |
| local_irq_enable(); | |
| stop_critical_timings(); | |
| while (!tif_need_resched() && | |
| (cpu_idle_force_poll || tick_check_broadcast_expired())) | |
| cpu_relax(); | |
| start_critical_timings(); | |
| trace_cpu_idle_rcuidle(PWR_EVENT_EXIT, smp_processor_id()); | |
| rcu_idle_exit(); | |
| return 1; | |
| } | |
| /* Weak implementations for optional arch specific functions */ | |
| void __weak arch_cpu_idle_prepare(void) { } | |
| void __weak arch_cpu_idle_enter(void) { } | |
| void __weak arch_cpu_idle_exit(void) { } | |
| void __weak arch_cpu_idle_dead(void) { } | |
| void __weak arch_cpu_idle(void) | |
| { | |
| cpu_idle_force_poll = 1; | |
| local_irq_enable(); | |
| } | |
| /** | |
| * default_idle_call - Default CPU idle routine. | |
| * | |
| * To use when the cpuidle framework cannot be used. | |
| */ | |
| void default_idle_call(void) | |
| { | |
| if (current_clr_polling_and_test()) { | |
| local_irq_enable(); | |
| } else { | |
| stop_critical_timings(); | |
| arch_cpu_idle(); | |
| start_critical_timings(); | |
| } | |
| } | |
| static int call_cpuidle(struct cpuidle_driver *drv, struct cpuidle_device *dev, | |
| int next_state) | |
| { | |
| /* Fall back to the default arch idle method on errors. */ | |
| if (next_state < 0) { | |
| default_idle_call(); | |
| return next_state; | |
| } | |
| /* | |
| * The idle task must be scheduled, it is pointless to go to idle, just | |
| * update no idle residency and return. | |
| */ | |
| if (current_clr_polling_and_test()) { | |
| dev->last_residency = 0; | |
| local_irq_enable(); | |
| return -EBUSY; | |
| } | |
| /* | |
| * Enter the idle state previously returned by the governor decision. | |
| * This function will block until an interrupt occurs and will take | |
| * care of re-enabling the local interrupts | |
| */ | |
| return cpuidle_enter(drv, dev, next_state); | |
| } | |
| /** | |
| * cpuidle_idle_call - the main idle function | |
| * | |
| * NOTE: no locks or semaphores should be used here | |
| * | |
| * On archs that support TIF_POLLING_NRFLAG, is called with polling | |
| * set, and it returns with polling set. If it ever stops polling, it | |
| * must clear the polling bit. | |
| */ | |
| static void cpuidle_idle_call(void) | |
| { | |
| struct cpuidle_device *dev = __this_cpu_read(cpuidle_devices); | |
| struct cpuidle_driver *drv = cpuidle_get_cpu_driver(dev); | |
| int next_state, entered_state; | |
| /* | |
| * Check if the idle task must be rescheduled. If it is the | |
| * case, exit the function after re-enabling the local irq. | |
| */ | |
| if (need_resched()) { | |
| local_irq_enable(); | |
| return; | |
| } | |
| /* | |
| * Tell the RCU framework we are entering an idle section, | |
| * so no more rcu read side critical sections and one more | |
| * step to the grace period | |
| */ | |
| rcu_idle_enter(); | |
| if (cpuidle_not_available(drv, dev)) { | |
| default_idle_call(); | |
| goto exit_idle; | |
| } | |
| /* | |
| * Suspend-to-idle ("freeze") is a system state in which all user space | |
| * has been frozen, all I/O devices have been suspended and the only | |
| * activity happens here and in iterrupts (if any). In that case bypass | |
| * the cpuidle governor and go stratight for the deepest idle state | |
| * available. Possibly also suspend the local tick and the entire | |
| * timekeeping to prevent timer interrupts from kicking us out of idle | |
| * until a proper wakeup interrupt happens. | |
| */ | |
| if (idle_should_freeze()) { | |
| entered_state = cpuidle_enter_freeze(drv, dev); | |
| if (entered_state >= 0) { | |
| local_irq_enable(); | |
| goto exit_idle; | |
| } | |
| next_state = cpuidle_find_deepest_state(drv, dev); | |
| call_cpuidle(drv, dev, next_state); | |
| } else { | |
| /* | |
| * Ask the cpuidle framework to choose a convenient idle state. | |
| */ | |
| next_state = cpuidle_select(drv, dev); | |
| entered_state = call_cpuidle(drv, dev, next_state); | |
| /* | |
| * Give the governor an opportunity to reflect on the outcome | |
| */ | |
| cpuidle_reflect(dev, entered_state); | |
| } | |
| exit_idle: | |
| __current_set_polling(); | |
| /* | |
| * It is up to the idle functions to reenable local interrupts | |
| */ | |
| if (WARN_ON_ONCE(irqs_disabled())) | |
| local_irq_enable(); | |
| rcu_idle_exit(); | |
| } | |
| DEFINE_PER_CPU(bool, cpu_dead_idle); | |
| /* | |
| * Generic idle loop implementation | |
| * | |
| * Called with polling cleared. | |
| */ | |
| static void cpu_idle_loop(void) | |
| { | |
| while (1) { | |
| /* | |
| * If the arch has a polling bit, we maintain an invariant: | |
| * | |
| * Our polling bit is clear if we're not scheduled (i.e. if | |
| * rq->curr != rq->idle). This means that, if rq->idle has | |
| * the polling bit set, then setting need_resched is | |
| * guaranteed to cause the cpu to reschedule. | |
| */ | |
| __current_set_polling(); | |
| tick_nohz_idle_enter(); | |
| while (!need_resched()) { | |
| check_pgt_cache(); | |
| rmb(); | |
| if (cpu_is_offline(smp_processor_id())) { | |
| rcu_cpu_notify(NULL, CPU_DYING_IDLE, | |
| (void *)(long)smp_processor_id()); | |
| smp_mb(); /* all activity before dead. */ | |
| this_cpu_write(cpu_dead_idle, true); | |
| arch_cpu_idle_dead(); | |
| } | |
| local_irq_disable(); | |
| arch_cpu_idle_enter(); | |
| /* | |
| * In poll mode we reenable interrupts and spin. | |
| * | |
| * Also if we detected in the wakeup from idle | |
| * path that the tick broadcast device expired | |
| * for us, we don't want to go deep idle as we | |
| * know that the IPI is going to arrive right | |
| * away | |
| */ | |
| if (cpu_idle_force_poll || tick_check_broadcast_expired()) | |
| cpu_idle_poll(); | |
| else | |
| cpuidle_idle_call(); | |
| arch_cpu_idle_exit(); | |
| } | |
| /* | |
| * Since we fell out of the loop above, we know | |
| * TIF_NEED_RESCHED must be set, propagate it into | |
| * PREEMPT_NEED_RESCHED. | |
| * | |
| * This is required because for polling idle loops we will | |
| * not have had an IPI to fold the state for us. | |
| */ | |
| preempt_set_need_resched(); | |
| tick_nohz_idle_exit(); | |
| __current_clr_polling(); | |
| /* | |
| * We promise to call sched_ttwu_pending and reschedule | |
| * if need_resched is set while polling is set. That | |
| * means that clearing polling needs to be visible | |
| * before doing these things. | |
| */ | |
| smp_mb__after_atomic(); | |
| sched_ttwu_pending(); | |
| schedule_preempt_disabled(); | |
| } | |
| } | |
| void cpu_startup_entry(enum cpuhp_state state) | |
| { | |
| /* | |
| * This #ifdef needs to die, but it's too late in the cycle to | |
| * make this generic (arm and sh have never invoked the canary | |
| * init for the non boot cpus!). Will be fixed in 3.11 | |
| */ | |
| #ifdef CONFIG_X86 | |
| /* | |
| * If we're the non-boot CPU, nothing set the stack canary up | |
| * for us. The boot CPU already has it initialized but no harm | |
| * in doing it again. This is a good place for updating it, as | |
| * we wont ever return from this function (so the invalid | |
| * canaries already on the stack wont ever trigger). | |
| */ | |
| boot_init_stack_canary(); | |
| #endif | |
| arch_cpu_idle_prepare(); | |
| cpu_idle_loop(); | |
| } |