| /* | |
| * linux/kernel/time/tick-broadcast.c | |
| * | |
| * This file contains functions which emulate a local clock-event | |
| * device via a broadcast event source. | |
| * | |
| * Copyright(C) 2005-2006, Thomas Gleixner <tglx@linutronix.de> | |
| * Copyright(C) 2005-2007, Red Hat, Inc., Ingo Molnar | |
| * Copyright(C) 2006-2007, Timesys Corp., Thomas Gleixner | |
| * | |
| * This code is licenced under the GPL version 2. For details see | |
| * kernel-base/COPYING. | |
| */ | |
| #include <linux/cpu.h> | |
| #include <linux/err.h> | |
| #include <linux/hrtimer.h> | |
| #include <linux/interrupt.h> | |
| #include <linux/percpu.h> | |
| #include <linux/profile.h> | |
| #include <linux/sched.h> | |
| #include <linux/smp.h> | |
| #include <linux/module.h> | |
| #include "tick-internal.h" | |
| /* | |
| * Broadcast support for broken x86 hardware, where the local apic | |
| * timer stops in C3 state. | |
| */ | |
| static struct tick_device tick_broadcast_device; | |
| static cpumask_var_t tick_broadcast_mask; | |
| static cpumask_var_t tick_broadcast_on; | |
| static cpumask_var_t tmpmask; | |
| static DEFINE_RAW_SPINLOCK(tick_broadcast_lock); | |
| static int tick_broadcast_forced; | |
| #ifdef CONFIG_TICK_ONESHOT | |
| static void tick_broadcast_clear_oneshot(int cpu); | |
| static void tick_resume_broadcast_oneshot(struct clock_event_device *bc); | |
| #else | |
| static inline void tick_broadcast_clear_oneshot(int cpu) { } | |
| static inline void tick_resume_broadcast_oneshot(struct clock_event_device *bc) { } | |
| #endif | |
| /* | |
| * Debugging: see timer_list.c | |
| */ | |
| struct tick_device *tick_get_broadcast_device(void) | |
| { | |
| return &tick_broadcast_device; | |
| } | |
| struct cpumask *tick_get_broadcast_mask(void) | |
| { | |
| return tick_broadcast_mask; | |
| } | |
| /* | |
| * Start the device in periodic mode | |
| */ | |
| static void tick_broadcast_start_periodic(struct clock_event_device *bc) | |
| { | |
| if (bc) | |
| tick_setup_periodic(bc, 1); | |
| } | |
| /* | |
| * Check, if the device can be utilized as broadcast device: | |
| */ | |
| static bool tick_check_broadcast_device(struct clock_event_device *curdev, | |
| struct clock_event_device *newdev) | |
| { | |
| if ((newdev->features & CLOCK_EVT_FEAT_DUMMY) || | |
| (newdev->features & CLOCK_EVT_FEAT_PERCPU) || | |
| (newdev->features & CLOCK_EVT_FEAT_C3STOP)) | |
| return false; | |
| if (tick_broadcast_device.mode == TICKDEV_MODE_ONESHOT && | |
| !(newdev->features & CLOCK_EVT_FEAT_ONESHOT)) | |
| return false; | |
| return !curdev || newdev->rating > curdev->rating; | |
| } | |
| /* | |
| * Conditionally install/replace broadcast device | |
| */ | |
| void tick_install_broadcast_device(struct clock_event_device *dev) | |
| { | |
| struct clock_event_device *cur = tick_broadcast_device.evtdev; | |
| if (!tick_check_broadcast_device(cur, dev)) | |
| return; | |
| if (!try_module_get(dev->owner)) | |
| return; | |
| clockevents_exchange_device(cur, dev); | |
| if (cur) | |
| cur->event_handler = clockevents_handle_noop; | |
| tick_broadcast_device.evtdev = dev; | |
| if (!cpumask_empty(tick_broadcast_mask)) | |
| tick_broadcast_start_periodic(dev); | |
| /* | |
| * Inform all cpus about this. We might be in a situation | |
| * where we did not switch to oneshot mode because the per cpu | |
| * devices are affected by CLOCK_EVT_FEAT_C3STOP and the lack | |
| * of a oneshot capable broadcast device. Without that | |
| * notification the systems stays stuck in periodic mode | |
| * forever. | |
| */ | |
| if (dev->features & CLOCK_EVT_FEAT_ONESHOT) | |
| tick_clock_notify(); | |
| } | |
| /* | |
| * Check, if the device is the broadcast device | |
| */ | |
| int tick_is_broadcast_device(struct clock_event_device *dev) | |
| { | |
| return (dev && tick_broadcast_device.evtdev == dev); | |
| } | |
| int tick_broadcast_update_freq(struct clock_event_device *dev, u32 freq) | |
| { | |
| int ret = -ENODEV; | |
| if (tick_is_broadcast_device(dev)) { | |
| raw_spin_lock(&tick_broadcast_lock); | |
| ret = __clockevents_update_freq(dev, freq); | |
| raw_spin_unlock(&tick_broadcast_lock); | |
| } | |
| return ret; | |
| } | |
| static void err_broadcast(const struct cpumask *mask) | |
| { | |
| pr_crit_once("Failed to broadcast timer tick. Some CPUs may be unresponsive.\n"); | |
| } | |
| static void tick_device_setup_broadcast_func(struct clock_event_device *dev) | |
| { | |
| if (!dev->broadcast) | |
| dev->broadcast = tick_broadcast; | |
| if (!dev->broadcast) { | |
| pr_warn_once("%s depends on broadcast, but no broadcast function available\n", | |
| dev->name); | |
| dev->broadcast = err_broadcast; | |
| } | |
| } | |
| /* | |
| * Check, if the device is disfunctional and a place holder, which | |
| * needs to be handled by the broadcast device. | |
| */ | |
| int tick_device_uses_broadcast(struct clock_event_device *dev, int cpu) | |
| { | |
| struct clock_event_device *bc = tick_broadcast_device.evtdev; | |
| unsigned long flags; | |
| int ret = 0; | |
| raw_spin_lock_irqsave(&tick_broadcast_lock, flags); | |
| /* | |
| * Devices might be registered with both periodic and oneshot | |
| * mode disabled. This signals, that the device needs to be | |
| * operated from the broadcast device and is a placeholder for | |
| * the cpu local device. | |
| */ | |
| if (!tick_device_is_functional(dev)) { | |
| dev->event_handler = tick_handle_periodic; | |
| tick_device_setup_broadcast_func(dev); | |
| cpumask_set_cpu(cpu, tick_broadcast_mask); | |
| if (tick_broadcast_device.mode == TICKDEV_MODE_PERIODIC) | |
| tick_broadcast_start_periodic(bc); | |
| else | |
| tick_broadcast_setup_oneshot(bc); | |
| ret = 1; | |
| } else { | |
| /* | |
| * Clear the broadcast bit for this cpu if the | |
| * device is not power state affected. | |
| */ | |
| if (!(dev->features & CLOCK_EVT_FEAT_C3STOP)) | |
| cpumask_clear_cpu(cpu, tick_broadcast_mask); | |
| else | |
| tick_device_setup_broadcast_func(dev); | |
| /* | |
| * Clear the broadcast bit if the CPU is not in | |
| * periodic broadcast on state. | |
| */ | |
| if (!cpumask_test_cpu(cpu, tick_broadcast_on)) | |
| cpumask_clear_cpu(cpu, tick_broadcast_mask); | |
| switch (tick_broadcast_device.mode) { | |
| case TICKDEV_MODE_ONESHOT: | |
| /* | |
| * If the system is in oneshot mode we can | |
| * unconditionally clear the oneshot mask bit, | |
| * because the CPU is running and therefore | |
| * not in an idle state which causes the power | |
| * state affected device to stop. Let the | |
| * caller initialize the device. | |
| */ | |
| tick_broadcast_clear_oneshot(cpu); | |
| ret = 0; | |
| break; | |
| case TICKDEV_MODE_PERIODIC: | |
| /* | |
| * If the system is in periodic mode, check | |
| * whether the broadcast device can be | |
| * switched off now. | |
| */ | |
| if (cpumask_empty(tick_broadcast_mask) && bc) | |
| clockevents_shutdown(bc); | |
| /* | |
| * If we kept the cpu in the broadcast mask, | |
| * tell the caller to leave the per cpu device | |
| * in shutdown state. The periodic interrupt | |
| * is delivered by the broadcast device, if | |
| * the broadcast device exists and is not | |
| * hrtimer based. | |
| */ | |
| if (bc && !(bc->features & CLOCK_EVT_FEAT_HRTIMER)) | |
| ret = cpumask_test_cpu(cpu, tick_broadcast_mask); | |
| break; | |
| default: | |
| break; | |
| } | |
| } | |
| raw_spin_unlock_irqrestore(&tick_broadcast_lock, flags); | |
| return ret; | |
| } | |
| #ifdef CONFIG_GENERIC_CLOCKEVENTS_BROADCAST | |
| int tick_receive_broadcast(void) | |
| { | |
| struct tick_device *td = this_cpu_ptr(&tick_cpu_device); | |
| struct clock_event_device *evt = td->evtdev; | |
| if (!evt) | |
| return -ENODEV; | |
| if (!evt->event_handler) | |
| return -EINVAL; | |
| evt->event_handler(evt); | |
| return 0; | |
| } | |
| #endif | |
| /* | |
| * Broadcast the event to the cpus, which are set in the mask (mangled). | |
| */ | |
| static bool tick_do_broadcast(struct cpumask *mask) | |
| { | |
| int cpu = smp_processor_id(); | |
| struct tick_device *td; | |
| bool local = false; | |
| /* | |
| * Check, if the current cpu is in the mask | |
| */ | |
| if (cpumask_test_cpu(cpu, mask)) { | |
| struct clock_event_device *bc = tick_broadcast_device.evtdev; | |
| cpumask_clear_cpu(cpu, mask); | |
| /* | |
| * We only run the local handler, if the broadcast | |
| * device is not hrtimer based. Otherwise we run into | |
| * a hrtimer recursion. | |
| * | |
| * local timer_interrupt() | |
| * local_handler() | |
| * expire_hrtimers() | |
| * bc_handler() | |
| * local_handler() | |
| * expire_hrtimers() | |
| */ | |
| local = !(bc->features & CLOCK_EVT_FEAT_HRTIMER); | |
| } | |
| if (!cpumask_empty(mask)) { | |
| /* | |
| * It might be necessary to actually check whether the devices | |
| * have different broadcast functions. For now, just use the | |
| * one of the first device. This works as long as we have this | |
| * misfeature only on x86 (lapic) | |
| */ | |
| td = &per_cpu(tick_cpu_device, cpumask_first(mask)); | |
| td->evtdev->broadcast(mask); | |
| } | |
| return local; | |
| } | |
| /* | |
| * Periodic broadcast: | |
| * - invoke the broadcast handlers | |
| */ | |
| static bool tick_do_periodic_broadcast(void) | |
| { | |
| cpumask_and(tmpmask, cpu_online_mask, tick_broadcast_mask); | |
| return tick_do_broadcast(tmpmask); | |
| } | |
| /* | |
| * Event handler for periodic broadcast ticks | |
| */ | |
| static void tick_handle_periodic_broadcast(struct clock_event_device *dev) | |
| { | |
| struct tick_device *td = this_cpu_ptr(&tick_cpu_device); | |
| bool bc_local; | |
| raw_spin_lock(&tick_broadcast_lock); | |
| /* Handle spurious interrupts gracefully */ | |
| if (clockevent_state_shutdown(tick_broadcast_device.evtdev)) { | |
| raw_spin_unlock(&tick_broadcast_lock); | |
| return; | |
| } | |
| bc_local = tick_do_periodic_broadcast(); | |
| if (clockevent_state_oneshot(dev)) { | |
| ktime_t next = ktime_add(dev->next_event, tick_period); | |
| clockevents_program_event(dev, next, true); | |
| } | |
| raw_spin_unlock(&tick_broadcast_lock); | |
| /* | |
| * We run the handler of the local cpu after dropping | |
| * tick_broadcast_lock because the handler might deadlock when | |
| * trying to switch to oneshot mode. | |
| */ | |
| if (bc_local) | |
| td->evtdev->event_handler(td->evtdev); | |
| } | |
| /** | |
| * tick_broadcast_control - Enable/disable or force broadcast mode | |
| * @mode: The selected broadcast mode | |
| * | |
| * Called when the system enters a state where affected tick devices | |
| * might stop. Note: TICK_BROADCAST_FORCE cannot be undone. | |
| * | |
| * Called with interrupts disabled, so clockevents_lock is not | |
| * required here because the local clock event device cannot go away | |
| * under us. | |
| */ | |
| void tick_broadcast_control(enum tick_broadcast_mode mode) | |
| { | |
| struct clock_event_device *bc, *dev; | |
| struct tick_device *td; | |
| int cpu, bc_stopped; | |
| td = this_cpu_ptr(&tick_cpu_device); | |
| dev = td->evtdev; | |
| /* | |
| * Is the device not affected by the powerstate ? | |
| */ | |
| if (!dev || !(dev->features & CLOCK_EVT_FEAT_C3STOP)) | |
| return; | |
| if (!tick_device_is_functional(dev)) | |
| return; | |
| raw_spin_lock(&tick_broadcast_lock); | |
| cpu = smp_processor_id(); | |
| bc = tick_broadcast_device.evtdev; | |
| bc_stopped = cpumask_empty(tick_broadcast_mask); | |
| switch (mode) { | |
| case TICK_BROADCAST_FORCE: | |
| tick_broadcast_forced = 1; | |
| case TICK_BROADCAST_ON: | |
| cpumask_set_cpu(cpu, tick_broadcast_on); | |
| if (!cpumask_test_and_set_cpu(cpu, tick_broadcast_mask)) { | |
| /* | |
| * Only shutdown the cpu local device, if: | |
| * | |
| * - the broadcast device exists | |
| * - the broadcast device is not a hrtimer based one | |
| * - the broadcast device is in periodic mode to | |
| * avoid a hickup during switch to oneshot mode | |
| */ | |
| if (bc && !(bc->features & CLOCK_EVT_FEAT_HRTIMER) && | |
| tick_broadcast_device.mode == TICKDEV_MODE_PERIODIC) | |
| clockevents_shutdown(dev); | |
| } | |
| break; | |
| case TICK_BROADCAST_OFF: | |
| if (tick_broadcast_forced) | |
| break; | |
| cpumask_clear_cpu(cpu, tick_broadcast_on); | |
| if (!tick_device_is_functional(dev)) | |
| break; | |
| if (cpumask_test_and_clear_cpu(cpu, tick_broadcast_mask)) { | |
| if (tick_broadcast_device.mode == | |
| TICKDEV_MODE_PERIODIC) | |
| tick_setup_periodic(dev, 0); | |
| } | |
| break; | |
| } | |
| if (bc) { | |
| if (cpumask_empty(tick_broadcast_mask)) { | |
| if (!bc_stopped) | |
| clockevents_shutdown(bc); | |
| } else if (bc_stopped) { | |
| if (tick_broadcast_device.mode == TICKDEV_MODE_PERIODIC) | |
| tick_broadcast_start_periodic(bc); | |
| else | |
| tick_broadcast_setup_oneshot(bc); | |
| } | |
| } | |
| raw_spin_unlock(&tick_broadcast_lock); | |
| } | |
| EXPORT_SYMBOL_GPL(tick_broadcast_control); | |
| /* | |
| * Set the periodic handler depending on broadcast on/off | |
| */ | |
| void tick_set_periodic_handler(struct clock_event_device *dev, int broadcast) | |
| { | |
| if (!broadcast) | |
| dev->event_handler = tick_handle_periodic; | |
| else | |
| dev->event_handler = tick_handle_periodic_broadcast; | |
| } | |
| #ifdef CONFIG_HOTPLUG_CPU | |
| /* | |
| * Remove a CPU from broadcasting | |
| */ | |
| void tick_shutdown_broadcast(unsigned int cpu) | |
| { | |
| struct clock_event_device *bc; | |
| unsigned long flags; | |
| raw_spin_lock_irqsave(&tick_broadcast_lock, flags); | |
| bc = tick_broadcast_device.evtdev; | |
| cpumask_clear_cpu(cpu, tick_broadcast_mask); | |
| cpumask_clear_cpu(cpu, tick_broadcast_on); | |
| if (tick_broadcast_device.mode == TICKDEV_MODE_PERIODIC) { | |
| if (bc && cpumask_empty(tick_broadcast_mask)) | |
| clockevents_shutdown(bc); | |
| } | |
| raw_spin_unlock_irqrestore(&tick_broadcast_lock, flags); | |
| } | |
| #endif | |
| void tick_suspend_broadcast(void) | |
| { | |
| struct clock_event_device *bc; | |
| unsigned long flags; | |
| raw_spin_lock_irqsave(&tick_broadcast_lock, flags); | |
| bc = tick_broadcast_device.evtdev; | |
| if (bc) | |
| clockevents_shutdown(bc); | |
| raw_spin_unlock_irqrestore(&tick_broadcast_lock, flags); | |
| } | |
| /* | |
| * This is called from tick_resume_local() on a resuming CPU. That's | |
| * called from the core resume function, tick_unfreeze() and the magic XEN | |
| * resume hackery. | |
| * | |
| * In none of these cases the broadcast device mode can change and the | |
| * bit of the resuming CPU in the broadcast mask is safe as well. | |
| */ | |
| bool tick_resume_check_broadcast(void) | |
| { | |
| if (tick_broadcast_device.mode == TICKDEV_MODE_ONESHOT) | |
| return false; | |
| else | |
| return cpumask_test_cpu(smp_processor_id(), tick_broadcast_mask); | |
| } | |
| void tick_resume_broadcast(void) | |
| { | |
| struct clock_event_device *bc; | |
| unsigned long flags; | |
| raw_spin_lock_irqsave(&tick_broadcast_lock, flags); | |
| bc = tick_broadcast_device.evtdev; | |
| if (bc) { | |
| clockevents_tick_resume(bc); | |
| switch (tick_broadcast_device.mode) { | |
| case TICKDEV_MODE_PERIODIC: | |
| if (!cpumask_empty(tick_broadcast_mask)) | |
| tick_broadcast_start_periodic(bc); | |
| break; | |
| case TICKDEV_MODE_ONESHOT: | |
| if (!cpumask_empty(tick_broadcast_mask)) | |
| tick_resume_broadcast_oneshot(bc); | |
| break; | |
| } | |
| } | |
| raw_spin_unlock_irqrestore(&tick_broadcast_lock, flags); | |
| } | |
| #ifdef CONFIG_TICK_ONESHOT | |
| static cpumask_var_t tick_broadcast_oneshot_mask; | |
| static cpumask_var_t tick_broadcast_pending_mask; | |
| static cpumask_var_t tick_broadcast_force_mask; | |
| /* | |
| * Exposed for debugging: see timer_list.c | |
| */ | |
| struct cpumask *tick_get_broadcast_oneshot_mask(void) | |
| { | |
| return tick_broadcast_oneshot_mask; | |
| } | |
| /* | |
| * Called before going idle with interrupts disabled. Checks whether a | |
| * broadcast event from the other core is about to happen. We detected | |
| * that in tick_broadcast_oneshot_control(). The callsite can use this | |
| * to avoid a deep idle transition as we are about to get the | |
| * broadcast IPI right away. | |
| */ | |
| int tick_check_broadcast_expired(void) | |
| { | |
| return cpumask_test_cpu(smp_processor_id(), tick_broadcast_force_mask); | |
| } | |
| /* | |
| * Set broadcast interrupt affinity | |
| */ | |
| static void tick_broadcast_set_affinity(struct clock_event_device *bc, | |
| const struct cpumask *cpumask) | |
| { | |
| if (!(bc->features & CLOCK_EVT_FEAT_DYNIRQ)) | |
| return; | |
| if (cpumask_equal(bc->cpumask, cpumask)) | |
| return; | |
| bc->cpumask = cpumask; | |
| irq_set_affinity(bc->irq, bc->cpumask); | |
| } | |
| static void tick_broadcast_set_event(struct clock_event_device *bc, int cpu, | |
| ktime_t expires) | |
| { | |
| if (!clockevent_state_oneshot(bc)) | |
| clockevents_switch_state(bc, CLOCK_EVT_STATE_ONESHOT); | |
| clockevents_program_event(bc, expires, 1); | |
| tick_broadcast_set_affinity(bc, cpumask_of(cpu)); | |
| } | |
| static void tick_resume_broadcast_oneshot(struct clock_event_device *bc) | |
| { | |
| clockevents_switch_state(bc, CLOCK_EVT_STATE_ONESHOT); | |
| } | |
| /* | |
| * Called from irq_enter() when idle was interrupted to reenable the | |
| * per cpu device. | |
| */ | |
| void tick_check_oneshot_broadcast_this_cpu(void) | |
| { | |
| if (cpumask_test_cpu(smp_processor_id(), tick_broadcast_oneshot_mask)) { | |
| struct tick_device *td = this_cpu_ptr(&tick_cpu_device); | |
| /* | |
| * We might be in the middle of switching over from | |
| * periodic to oneshot. If the CPU has not yet | |
| * switched over, leave the device alone. | |
| */ | |
| if (td->mode == TICKDEV_MODE_ONESHOT) { | |
| clockevents_switch_state(td->evtdev, | |
| CLOCK_EVT_STATE_ONESHOT); | |
| } | |
| } | |
| } | |
| /* | |
| * Handle oneshot mode broadcasting | |
| */ | |
| static void tick_handle_oneshot_broadcast(struct clock_event_device *dev) | |
| { | |
| struct tick_device *td; | |
| ktime_t now, next_event; | |
| int cpu, next_cpu = 0; | |
| bool bc_local; | |
| raw_spin_lock(&tick_broadcast_lock); | |
| dev->next_event.tv64 = KTIME_MAX; | |
| next_event.tv64 = KTIME_MAX; | |
| cpumask_clear(tmpmask); | |
| now = ktime_get(); | |
| /* Find all expired events */ | |
| for_each_cpu(cpu, tick_broadcast_oneshot_mask) { | |
| td = &per_cpu(tick_cpu_device, cpu); | |
| if (td->evtdev->next_event.tv64 <= now.tv64) { | |
| cpumask_set_cpu(cpu, tmpmask); | |
| /* | |
| * Mark the remote cpu in the pending mask, so | |
| * it can avoid reprogramming the cpu local | |
| * timer in tick_broadcast_oneshot_control(). | |
| */ | |
| cpumask_set_cpu(cpu, tick_broadcast_pending_mask); | |
| } else if (td->evtdev->next_event.tv64 < next_event.tv64) { | |
| next_event.tv64 = td->evtdev->next_event.tv64; | |
| next_cpu = cpu; | |
| } | |
| } | |
| /* | |
| * Remove the current cpu from the pending mask. The event is | |
| * delivered immediately in tick_do_broadcast() ! | |
| */ | |
| cpumask_clear_cpu(smp_processor_id(), tick_broadcast_pending_mask); | |
| /* Take care of enforced broadcast requests */ | |
| cpumask_or(tmpmask, tmpmask, tick_broadcast_force_mask); | |
| cpumask_clear(tick_broadcast_force_mask); | |
| /* | |
| * Sanity check. Catch the case where we try to broadcast to | |
| * offline cpus. | |
| */ | |
| if (WARN_ON_ONCE(!cpumask_subset(tmpmask, cpu_online_mask))) | |
| cpumask_and(tmpmask, tmpmask, cpu_online_mask); | |
| /* | |
| * Wakeup the cpus which have an expired event. | |
| */ | |
| bc_local = tick_do_broadcast(tmpmask); | |
| /* | |
| * Two reasons for reprogram: | |
| * | |
| * - The global event did not expire any CPU local | |
| * events. This happens in dyntick mode, as the maximum PIT | |
| * delta is quite small. | |
| * | |
| * - There are pending events on sleeping CPUs which were not | |
| * in the event mask | |
| */ | |
| if (next_event.tv64 != KTIME_MAX) | |
| tick_broadcast_set_event(dev, next_cpu, next_event); | |
| raw_spin_unlock(&tick_broadcast_lock); | |
| if (bc_local) { | |
| td = this_cpu_ptr(&tick_cpu_device); | |
| td->evtdev->event_handler(td->evtdev); | |
| } | |
| } | |
| static int broadcast_needs_cpu(struct clock_event_device *bc, int cpu) | |
| { | |
| if (!(bc->features & CLOCK_EVT_FEAT_HRTIMER)) | |
| return 0; | |
| if (bc->next_event.tv64 == KTIME_MAX) | |
| return 0; | |
| return bc->bound_on == cpu ? -EBUSY : 0; | |
| } | |
| static void broadcast_shutdown_local(struct clock_event_device *bc, | |
| struct clock_event_device *dev) | |
| { | |
| /* | |
| * For hrtimer based broadcasting we cannot shutdown the cpu | |
| * local device if our own event is the first one to expire or | |
| * if we own the broadcast timer. | |
| */ | |
| if (bc->features & CLOCK_EVT_FEAT_HRTIMER) { | |
| if (broadcast_needs_cpu(bc, smp_processor_id())) | |
| return; | |
| if (dev->next_event.tv64 < bc->next_event.tv64) | |
| return; | |
| } | |
| clockevents_switch_state(dev, CLOCK_EVT_STATE_SHUTDOWN); | |
| } | |
| int __tick_broadcast_oneshot_control(enum tick_broadcast_state state) | |
| { | |
| struct clock_event_device *bc, *dev; | |
| int cpu, ret = 0; | |
| ktime_t now; | |
| /* | |
| * If there is no broadcast device, tell the caller not to go | |
| * into deep idle. | |
| */ | |
| if (!tick_broadcast_device.evtdev) | |
| return -EBUSY; | |
| dev = this_cpu_ptr(&tick_cpu_device)->evtdev; | |
| raw_spin_lock(&tick_broadcast_lock); | |
| bc = tick_broadcast_device.evtdev; | |
| cpu = smp_processor_id(); | |
| if (state == TICK_BROADCAST_ENTER) { | |
| /* | |
| * If the current CPU owns the hrtimer broadcast | |
| * mechanism, it cannot go deep idle and we do not add | |
| * the CPU to the broadcast mask. We don't have to go | |
| * through the EXIT path as the local timer is not | |
| * shutdown. | |
| */ | |
| ret = broadcast_needs_cpu(bc, cpu); | |
| if (ret) | |
| goto out; | |
| /* | |
| * If the broadcast device is in periodic mode, we | |
| * return. | |
| */ | |
| if (tick_broadcast_device.mode == TICKDEV_MODE_PERIODIC) { | |
| /* If it is a hrtimer based broadcast, return busy */ | |
| if (bc->features & CLOCK_EVT_FEAT_HRTIMER) | |
| ret = -EBUSY; | |
| goto out; | |
| } | |
| if (!cpumask_test_and_set_cpu(cpu, tick_broadcast_oneshot_mask)) { | |
| WARN_ON_ONCE(cpumask_test_cpu(cpu, tick_broadcast_pending_mask)); | |
| /* Conditionally shut down the local timer. */ | |
| broadcast_shutdown_local(bc, dev); | |
| /* | |
| * We only reprogram the broadcast timer if we | |
| * did not mark ourself in the force mask and | |
| * if the cpu local event is earlier than the | |
| * broadcast event. If the current CPU is in | |
| * the force mask, then we are going to be | |
| * woken by the IPI right away; we return | |
| * busy, so the CPU does not try to go deep | |
| * idle. | |
| */ | |
| if (cpumask_test_cpu(cpu, tick_broadcast_force_mask)) { | |
| ret = -EBUSY; | |
| } else if (dev->next_event.tv64 < bc->next_event.tv64) { | |
| tick_broadcast_set_event(bc, cpu, dev->next_event); | |
| /* | |
| * In case of hrtimer broadcasts the | |
| * programming might have moved the | |
| * timer to this cpu. If yes, remove | |
| * us from the broadcast mask and | |
| * return busy. | |
| */ | |
| ret = broadcast_needs_cpu(bc, cpu); | |
| if (ret) { | |
| cpumask_clear_cpu(cpu, | |
| tick_broadcast_oneshot_mask); | |
| } | |
| } | |
| } | |
| } else { | |
| if (cpumask_test_and_clear_cpu(cpu, tick_broadcast_oneshot_mask)) { | |
| clockevents_switch_state(dev, CLOCK_EVT_STATE_ONESHOT); | |
| /* | |
| * The cpu which was handling the broadcast | |
| * timer marked this cpu in the broadcast | |
| * pending mask and fired the broadcast | |
| * IPI. So we are going to handle the expired | |
| * event anyway via the broadcast IPI | |
| * handler. No need to reprogram the timer | |
| * with an already expired event. | |
| */ | |
| if (cpumask_test_and_clear_cpu(cpu, | |
| tick_broadcast_pending_mask)) | |
| goto out; | |
| /* | |
| * Bail out if there is no next event. | |
| */ | |
| if (dev->next_event.tv64 == KTIME_MAX) | |
| goto out; | |
| /* | |
| * If the pending bit is not set, then we are | |
| * either the CPU handling the broadcast | |
| * interrupt or we got woken by something else. | |
| * | |
| * We are not longer in the broadcast mask, so | |
| * if the cpu local expiry time is already | |
| * reached, we would reprogram the cpu local | |
| * timer with an already expired event. | |
| * | |
| * This can lead to a ping-pong when we return | |
| * to idle and therefor rearm the broadcast | |
| * timer before the cpu local timer was able | |
| * to fire. This happens because the forced | |
| * reprogramming makes sure that the event | |
| * will happen in the future and depending on | |
| * the min_delta setting this might be far | |
| * enough out that the ping-pong starts. | |
| * | |
| * If the cpu local next_event has expired | |
| * then we know that the broadcast timer | |
| * next_event has expired as well and | |
| * broadcast is about to be handled. So we | |
| * avoid reprogramming and enforce that the | |
| * broadcast handler, which did not run yet, | |
| * will invoke the cpu local handler. | |
| * | |
| * We cannot call the handler directly from | |
| * here, because we might be in a NOHZ phase | |
| * and we did not go through the irq_enter() | |
| * nohz fixups. | |
| */ | |
| now = ktime_get(); | |
| if (dev->next_event.tv64 <= now.tv64) { | |
| cpumask_set_cpu(cpu, tick_broadcast_force_mask); | |
| goto out; | |
| } | |
| /* | |
| * We got woken by something else. Reprogram | |
| * the cpu local timer device. | |
| */ | |
| tick_program_event(dev->next_event, 1); | |
| } | |
| } | |
| out: | |
| raw_spin_unlock(&tick_broadcast_lock); | |
| return ret; | |
| } | |
| /* | |
| * Reset the one shot broadcast for a cpu | |
| * | |
| * Called with tick_broadcast_lock held | |
| */ | |
| static void tick_broadcast_clear_oneshot(int cpu) | |
| { | |
| cpumask_clear_cpu(cpu, tick_broadcast_oneshot_mask); | |
| cpumask_clear_cpu(cpu, tick_broadcast_pending_mask); | |
| } | |
| static void tick_broadcast_init_next_event(struct cpumask *mask, | |
| ktime_t expires) | |
| { | |
| struct tick_device *td; | |
| int cpu; | |
| for_each_cpu(cpu, mask) { | |
| td = &per_cpu(tick_cpu_device, cpu); | |
| if (td->evtdev) | |
| td->evtdev->next_event = expires; | |
| } | |
| } | |
| /** | |
| * tick_broadcast_setup_oneshot - setup the broadcast device | |
| */ | |
| void tick_broadcast_setup_oneshot(struct clock_event_device *bc) | |
| { | |
| int cpu = smp_processor_id(); | |
| /* Set it up only once ! */ | |
| if (bc->event_handler != tick_handle_oneshot_broadcast) { | |
| int was_periodic = clockevent_state_periodic(bc); | |
| bc->event_handler = tick_handle_oneshot_broadcast; | |
| /* | |
| * We must be careful here. There might be other CPUs | |
| * waiting for periodic broadcast. We need to set the | |
| * oneshot_mask bits for those and program the | |
| * broadcast device to fire. | |
| */ | |
| cpumask_copy(tmpmask, tick_broadcast_mask); | |
| cpumask_clear_cpu(cpu, tmpmask); | |
| cpumask_or(tick_broadcast_oneshot_mask, | |
| tick_broadcast_oneshot_mask, tmpmask); | |
| if (was_periodic && !cpumask_empty(tmpmask)) { | |
| clockevents_switch_state(bc, CLOCK_EVT_STATE_ONESHOT); | |
| tick_broadcast_init_next_event(tmpmask, | |
| tick_next_period); | |
| tick_broadcast_set_event(bc, cpu, tick_next_period); | |
| } else | |
| bc->next_event.tv64 = KTIME_MAX; | |
| } else { | |
| /* | |
| * The first cpu which switches to oneshot mode sets | |
| * the bit for all other cpus which are in the general | |
| * (periodic) broadcast mask. So the bit is set and | |
| * would prevent the first broadcast enter after this | |
| * to program the bc device. | |
| */ | |
| tick_broadcast_clear_oneshot(cpu); | |
| } | |
| } | |
| /* | |
| * Select oneshot operating mode for the broadcast device | |
| */ | |
| void tick_broadcast_switch_to_oneshot(void) | |
| { | |
| struct clock_event_device *bc; | |
| unsigned long flags; | |
| raw_spin_lock_irqsave(&tick_broadcast_lock, flags); | |
| tick_broadcast_device.mode = TICKDEV_MODE_ONESHOT; | |
| bc = tick_broadcast_device.evtdev; | |
| if (bc) | |
| tick_broadcast_setup_oneshot(bc); | |
| raw_spin_unlock_irqrestore(&tick_broadcast_lock, flags); | |
| } | |
| #ifdef CONFIG_HOTPLUG_CPU | |
| void hotplug_cpu__broadcast_tick_pull(int deadcpu) | |
| { | |
| struct clock_event_device *bc; | |
| unsigned long flags; | |
| raw_spin_lock_irqsave(&tick_broadcast_lock, flags); | |
| bc = tick_broadcast_device.evtdev; | |
| if (bc && broadcast_needs_cpu(bc, deadcpu)) { | |
| /* This moves the broadcast assignment to this CPU: */ | |
| clockevents_program_event(bc, bc->next_event, 1); | |
| } | |
| raw_spin_unlock_irqrestore(&tick_broadcast_lock, flags); | |
| } | |
| /* | |
| * Remove a dead CPU from broadcasting | |
| */ | |
| void tick_shutdown_broadcast_oneshot(unsigned int cpu) | |
| { | |
| unsigned long flags; | |
| raw_spin_lock_irqsave(&tick_broadcast_lock, flags); | |
| /* | |
| * Clear the broadcast masks for the dead cpu, but do not stop | |
| * the broadcast device! | |
| */ | |
| cpumask_clear_cpu(cpu, tick_broadcast_oneshot_mask); | |
| cpumask_clear_cpu(cpu, tick_broadcast_pending_mask); | |
| cpumask_clear_cpu(cpu, tick_broadcast_force_mask); | |
| raw_spin_unlock_irqrestore(&tick_broadcast_lock, flags); | |
| } | |
| #endif | |
| /* | |
| * Check, whether the broadcast device is in one shot mode | |
| */ | |
| int tick_broadcast_oneshot_active(void) | |
| { | |
| return tick_broadcast_device.mode == TICKDEV_MODE_ONESHOT; | |
| } | |
| /* | |
| * Check whether the broadcast device supports oneshot. | |
| */ | |
| bool tick_broadcast_oneshot_available(void) | |
| { | |
| struct clock_event_device *bc = tick_broadcast_device.evtdev; | |
| return bc ? bc->features & CLOCK_EVT_FEAT_ONESHOT : false; | |
| } | |
| #else | |
| int __tick_broadcast_oneshot_control(enum tick_broadcast_state state) | |
| { | |
| struct clock_event_device *bc = tick_broadcast_device.evtdev; | |
| if (!bc || (bc->features & CLOCK_EVT_FEAT_HRTIMER)) | |
| return -EBUSY; | |
| return 0; | |
| } | |
| #endif | |
| void __init tick_broadcast_init(void) | |
| { | |
| zalloc_cpumask_var(&tick_broadcast_mask, GFP_NOWAIT); | |
| zalloc_cpumask_var(&tick_broadcast_on, GFP_NOWAIT); | |
| zalloc_cpumask_var(&tmpmask, GFP_NOWAIT); | |
| #ifdef CONFIG_TICK_ONESHOT | |
| zalloc_cpumask_var(&tick_broadcast_oneshot_mask, GFP_NOWAIT); | |
| zalloc_cpumask_var(&tick_broadcast_pending_mask, GFP_NOWAIT); | |
| zalloc_cpumask_var(&tick_broadcast_force_mask, GFP_NOWAIT); | |
| #endif | |
| } |