| Kernel driver ads1015 | |
| ===================== | |
| Supported chips: | |
| * Texas Instruments ADS1015 | |
| Prefix: 'ads1015' | |
| Datasheet: Publicly available at the Texas Instruments website : | |
| http://focus.ti.com/lit/ds/symlink/ads1015.pdf | |
| * Texas Instruments ADS1115 | |
| Prefix: 'ads1115' | |
| Datasheet: Publicly available at the Texas Instruments website : | |
| http://focus.ti.com/lit/ds/symlink/ads1115.pdf | |
| Authors: | |
| Dirk Eibach, Guntermann & Drunck GmbH <eibach@gdsys.de> | |
| Description | |
| ----------- | |
| This driver implements support for the Texas Instruments ADS1015/ADS1115. | |
| This device is a 12/16-bit A-D converter with 4 inputs. | |
| The inputs can be used single ended or in certain differential combinations. | |
| The inputs can be made available by 8 sysfs input files in0_input - in7_input: | |
| in0: Voltage over AIN0 and AIN1. | |
| in1: Voltage over AIN0 and AIN3. | |
| in2: Voltage over AIN1 and AIN3. | |
| in3: Voltage over AIN2 and AIN3. | |
| in4: Voltage over AIN0 and GND. | |
| in5: Voltage over AIN1 and GND. | |
| in6: Voltage over AIN2 and GND. | |
| in7: Voltage over AIN3 and GND. | |
| Which inputs are available can be configured using platform data or devicetree. | |
| By default all inputs are exported. | |
| Platform Data | |
| ------------- | |
| In linux/i2c/ads1015.h platform data is defined, channel_data contains | |
| configuration data for the used input combinations: | |
| - pga is the programmable gain amplifier (values are full scale) | |
| 0: +/- 6.144 V | |
| 1: +/- 4.096 V | |
| 2: +/- 2.048 V | |
| 3: +/- 1.024 V | |
| 4: +/- 0.512 V | |
| 5: +/- 0.256 V | |
| - data_rate in samples per second | |
| 0: 128 | |
| 1: 250 | |
| 2: 490 | |
| 3: 920 | |
| 4: 1600 | |
| 5: 2400 | |
| 6: 3300 | |
| Example: | |
| struct ads1015_platform_data data = { | |
| .channel_data = { | |
| [2] = { .enabled = true, .pga = 1, .data_rate = 0 }, | |
| [4] = { .enabled = true, .pga = 4, .data_rate = 5 }, | |
| } | |
| }; | |
| In this case only in2_input (FS +/- 4.096 V, 128 SPS) and in4_input | |
| (FS +/- 0.512 V, 2400 SPS) would be created. | |
| Devicetree | |
| ---------- | |
| Configuration is also possible via devicetree: | |
| Documentation/devicetree/bindings/hwmon/ads1015.txt |