| The SGI IOC4 PCI device is a bit of a strange beast, so some notes on | |
| it are in order. | |
| First, even though the IOC4 performs multiple functions, such as an | |
| IDE controller, a serial controller, a PS/2 keyboard/mouse controller, | |
| and an external interrupt mechanism, it's not implemented as a | |
| multifunction device. The consequence of this from a software | |
| standpoint is that all these functions share a single IRQ, and | |
| they can't all register to own the same PCI device ID. To make | |
| matters a bit worse, some of the register blocks (and even registers | |
| themselves) present in IOC4 are mixed-purpose between these several | |
| functions, meaning that there's no clear "owning" device driver. | |
| The solution is to organize the IOC4 driver into several independent | |
| drivers, "ioc4", "sgiioc4", and "ioc4_serial". Note that there is no | |
| PS/2 controller driver as this functionality has never been wired up | |
| on a shipping IO card. | |
| ioc4 | |
| ==== | |
| This is the core (or shim) driver for IOC4. It is responsible for | |
| initializing the basic functionality of the chip, and allocating | |
| the PCI resources that are shared between the IOC4 functions. | |
| This driver also provides registration functions that the other | |
| IOC4 drivers can call to make their presence known. Each driver | |
| needs to provide a probe and remove function, which are invoked | |
| by the core driver at appropriate times. The interface of these | |
| IOC4 function probe and remove operations isn't precisely the same | |
| as PCI device probe and remove operations, but is logically the | |
| same operation. | |
| sgiioc4 | |
| ======= | |
| This is the IDE driver for IOC4. Its name isn't very descriptive | |
| simply for historical reasons (it used to be the only IOC4 driver | |
| component). There's not much to say about it other than it hooks | |
| up to the ioc4 driver via the appropriate registration, probe, and | |
| remove functions. | |
| ioc4_serial | |
| =========== | |
| This is the serial driver for IOC4. There's not much to say about it | |
| other than it hooks up to the ioc4 driver via the appropriate registration, | |
| probe, and remove functions. |