blob: bf2c8f65e1aefc6c4d89e9dfe15a9f4a804f090e [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001/*
David Brownelld49d4312005-05-07 13:21:50 -07002 * Copyright (C) 2001-2004 by David Brownell
David Brownell53bd6a62006-08-30 14:50:06 -07003 *
Linus Torvalds1da177e2005-04-16 15:20:36 -07004 * This program is free software; you can redistribute it and/or modify it
5 * under the terms of the GNU General Public License as published by the
6 * Free Software Foundation; either version 2 of the License, or (at your
7 * option) any later version.
8 *
9 * This program is distributed in the hope that it will be useful, but
10 * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
11 * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
12 * for more details.
13 *
14 * You should have received a copy of the GNU General Public License
15 * along with this program; if not, write to the Free Software Foundation,
16 * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
17 */
18
19/* this file is part of ehci-hcd.c */
20
21/*-------------------------------------------------------------------------*/
22
23/*
24 * EHCI Root Hub ... the nonsharable stuff
25 *
26 * Registers don't need cpu_to_le32, that happens transparently
27 */
28
29/*-------------------------------------------------------------------------*/
Anatolij Gustschin83722bc2011-04-18 22:02:00 +020030#include <linux/usb/otg.h>
Linus Torvalds1da177e2005-04-16 15:20:36 -070031
Alan Stern58a97ff2008-04-14 12:17:10 -040032#define PORT_WAKE_BITS (PORT_WKOC_E|PORT_WKDISC_E|PORT_WKCONN_E)
33
Alan Sternaff6d182008-04-18 11:11:26 -040034#ifdef CONFIG_PM
35
Alan Stern383975d2007-05-04 11:52:40 -040036static int ehci_hub_control(
37 struct usb_hcd *hcd,
38 u16 typeReq,
39 u16 wValue,
40 u16 wIndex,
41 char *buf,
42 u16 wLength
43);
44
45/* After a power loss, ports that were owned by the companion must be
46 * reset so that the companion can still own them.
47 */
48static void ehci_handover_companion_ports(struct ehci_hcd *ehci)
49{
50 u32 __iomem *reg;
51 u32 status;
52 int port;
53 __le32 buf;
54 struct usb_hcd *hcd = ehci_to_hcd(ehci);
55
56 if (!ehci->owned_ports)
57 return;
58
59 /* Give the connections some time to appear */
60 msleep(20);
61
62 port = HCS_N_PORTS(ehci->hcs_params);
63 while (port--) {
64 if (test_bit(port, &ehci->owned_ports)) {
65 reg = &ehci->regs->port_status[port];
Alan Stern3c519b82007-05-04 11:55:31 -040066 status = ehci_readl(ehci, reg) & ~PORT_RWC_BITS;
Alan Stern383975d2007-05-04 11:52:40 -040067
68 /* Port already owned by companion? */
69 if (status & PORT_OWNER)
70 clear_bit(port, &ehci->owned_ports);
Alan Stern3c519b82007-05-04 11:55:31 -040071 else if (test_bit(port, &ehci->companion_ports))
72 ehci_writel(ehci, status & ~PORT_PE, reg);
Alan Stern383975d2007-05-04 11:52:40 -040073 else
74 ehci_hub_control(hcd, SetPortFeature,
75 USB_PORT_FEAT_RESET, port + 1,
76 NULL, 0);
77 }
78 }
79
80 if (!ehci->owned_ports)
81 return;
82 msleep(90); /* Wait for resets to complete */
83
84 port = HCS_N_PORTS(ehci->hcs_params);
85 while (port--) {
86 if (test_bit(port, &ehci->owned_ports)) {
87 ehci_hub_control(hcd, GetPortStatus,
88 0, port + 1,
89 (char *) &buf, sizeof(buf));
90
91 /* The companion should now own the port,
92 * but if something went wrong the port must not
93 * remain enabled.
94 */
95 reg = &ehci->regs->port_status[port];
96 status = ehci_readl(ehci, reg) & ~PORT_RWC_BITS;
97 if (status & PORT_OWNER)
98 ehci_writel(ehci, status | PORT_CSC, reg);
99 else {
100 ehci_dbg(ehci, "failed handover port %d: %x\n",
101 port + 1, status);
102 ehci_writel(ehci, status & ~PORT_PE, reg);
103 }
104 }
105 }
106
107 ehci->owned_ports = 0;
108}
109
Matthew Garrett294d95f2011-01-11 12:26:48 -0500110static int ehci_port_change(struct ehci_hcd *ehci)
111{
112 int i = HCS_N_PORTS(ehci->hcs_params);
113
114 /* First check if the controller indicates a change event */
115
116 if (ehci_readl(ehci, &ehci->regs->status) & STS_PCD)
117 return 1;
118
119 /*
120 * Not all controllers appear to update this while going from D3 to D0,
121 * so check the individual port status registers as well
122 */
123
124 while (i--)
125 if (ehci_readl(ehci, &ehci->regs->port_status[i]) & PORT_CSC)
126 return 1;
127
128 return 0;
129}
130
Fabio Estevam0b0cd6c2011-04-12 09:31:54 -0300131static __maybe_unused void ehci_adjust_port_wakeup_flags(struct ehci_hcd *ehci,
Alan Stern41472002010-06-25 14:02:14 -0400132 bool suspending, bool do_wakeup)
Alan Stern16032c42010-05-12 18:21:35 -0400133{
134 int port;
135 u32 temp;
Yin Kangkai148fc552011-01-28 12:04:35 +0800136 unsigned long flags;
Alan Stern16032c42010-05-12 18:21:35 -0400137
138 /* If remote wakeup is enabled for the root hub but disabled
139 * for the controller, we must adjust all the port wakeup flags
140 * when the controller is suspended or resumed. In all other
141 * cases they don't need to be changed.
142 */
Alan Stern41472002010-06-25 14:02:14 -0400143 if (!ehci_to_hcd(ehci)->self.root_hub->do_remote_wakeup || do_wakeup)
Alan Stern16032c42010-05-12 18:21:35 -0400144 return;
145
Yin Kangkai148fc552011-01-28 12:04:35 +0800146 spin_lock_irqsave(&ehci->lock, flags);
147
Alan Stern16032c42010-05-12 18:21:35 -0400148 /* clear phy low-power mode before changing wakeup flags */
149 if (ehci->has_hostpc) {
150 port = HCS_N_PORTS(ehci->hcs_params);
151 while (port--) {
152 u32 __iomem *hostpc_reg;
153
154 hostpc_reg = (u32 __iomem *)((u8 *) ehci->regs
155 + HOSTPC0 + 4 * port);
156 temp = ehci_readl(ehci, hostpc_reg);
157 ehci_writel(ehci, temp & ~HOSTPC_PHCD, hostpc_reg);
158 }
Yin Kangkai148fc552011-01-28 12:04:35 +0800159 spin_unlock_irqrestore(&ehci->lock, flags);
Alan Stern16032c42010-05-12 18:21:35 -0400160 msleep(5);
Yin Kangkai148fc552011-01-28 12:04:35 +0800161 spin_lock_irqsave(&ehci->lock, flags);
Alan Stern16032c42010-05-12 18:21:35 -0400162 }
163
164 port = HCS_N_PORTS(ehci->hcs_params);
165 while (port--) {
166 u32 __iomem *reg = &ehci->regs->port_status[port];
167 u32 t1 = ehci_readl(ehci, reg) & ~PORT_RWC_BITS;
168 u32 t2 = t1 & ~PORT_WAKE_BITS;
169
170 /* If we are suspending the controller, clear the flags.
171 * If we are resuming the controller, set the wakeup flags.
172 */
173 if (!suspending) {
174 if (t1 & PORT_CONNECT)
175 t2 |= PORT_WKOC_E | PORT_WKDISC_E;
176 else
177 t2 |= PORT_WKOC_E | PORT_WKCONN_E;
178 }
179 ehci_vdbg(ehci, "port %d, %08x -> %08x\n",
180 port + 1, t1, t2);
181 ehci_writel(ehci, t2, reg);
182 }
183
184 /* enter phy low-power mode again */
185 if (ehci->has_hostpc) {
186 port = HCS_N_PORTS(ehci->hcs_params);
187 while (port--) {
188 u32 __iomem *hostpc_reg;
189
190 hostpc_reg = (u32 __iomem *)((u8 *) ehci->regs
191 + HOSTPC0 + 4 * port);
192 temp = ehci_readl(ehci, hostpc_reg);
193 ehci_writel(ehci, temp | HOSTPC_PHCD, hostpc_reg);
194 }
195 }
Alan Sternee0b9be2010-06-25 14:02:24 -0400196
197 /* Does the root hub have a port wakeup pending? */
Matthew Garrett294d95f2011-01-11 12:26:48 -0500198 if (!suspending && ehci_port_change(ehci))
Alan Sternee0b9be2010-06-25 14:02:24 -0400199 usb_hcd_resume_root_hub(ehci_to_hcd(ehci));
Yin Kangkai148fc552011-01-28 12:04:35 +0800200
201 spin_unlock_irqrestore(&ehci->lock, flags);
Alan Stern16032c42010-05-12 18:21:35 -0400202}
203
Alan Stern0c0382e2005-10-13 17:08:02 -0400204static int ehci_bus_suspend (struct usb_hcd *hcd)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700205{
206 struct ehci_hcd *ehci = hcd_to_ehci (hcd);
207 int port;
Alan Stern8c033562006-11-09 14:42:16 -0500208 int mask;
Alan Stern16032c42010-05-12 18:21:35 -0400209 int changed;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700210
Alan Stern8c774fe2007-02-01 16:09:59 -0500211 ehci_dbg(ehci, "suspend root hub\n");
212
Linus Torvalds1da177e2005-04-16 15:20:36 -0700213 if (time_before (jiffies, ehci->next_statechange))
214 msleep(5);
Alan Sternf8fa7572008-01-10 16:43:15 -0500215 del_timer_sync(&ehci->watchdog);
216 del_timer_sync(&ehci->iaa_watchdog);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700217
Linus Torvalds1da177e2005-04-16 15:20:36 -0700218 spin_lock_irq (&ehci->lock);
219
Alan Sterncec3a532010-01-08 11:18:20 -0500220 /* Once the controller is stopped, port resumes that are already
221 * in progress won't complete. Hence if remote wakeup is enabled
222 * for the root hub and any ports are in the middle of a resume or
223 * remote wakeup, we must fail the suspend.
224 */
225 if (hcd->self.root_hub->do_remote_wakeup) {
226 port = HCS_N_PORTS(ehci->hcs_params);
227 while (port--) {
228 if (ehci->reset_done[port] != 0) {
229 spin_unlock_irq(&ehci->lock);
230 ehci_dbg(ehci, "suspend failed because "
231 "port %d is resuming\n",
232 port + 1);
233 return -EBUSY;
234 }
235 }
236 }
237
Linus Torvalds1da177e2005-04-16 15:20:36 -0700238 /* stop schedules, clean any completed work */
239 if (HC_IS_RUNNING(hcd->state)) {
240 ehci_quiesce (ehci);
241 hcd->state = HC_STATE_QUIESCING;
242 }
Benjamin Herrenschmidt083522d2006-12-15 06:54:08 +1100243 ehci->command = ehci_readl(ehci, &ehci->regs->command);
David Howells7d12e782006-10-05 14:55:46 +0100244 ehci_work(ehci);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700245
Alan Stern8c033562006-11-09 14:42:16 -0500246 /* Unlike other USB host controller types, EHCI doesn't have
247 * any notion of "global" or bus-wide suspend. The driver has
248 * to manually suspend all the active unsuspended ports, and
249 * then manually resume them in the bus_resume() routine.
250 */
251 ehci->bus_suspended = 0;
Alan Stern383975d2007-05-04 11:52:40 -0400252 ehci->owned_ports = 0;
Alan Stern16032c42010-05-12 18:21:35 -0400253 changed = 0;
Alan Sterncec3a532010-01-08 11:18:20 -0500254 port = HCS_N_PORTS(ehci->hcs_params);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700255 while (port--) {
256 u32 __iomem *reg = &ehci->regs->port_status [port];
Benjamin Herrenschmidt083522d2006-12-15 06:54:08 +1100257 u32 t1 = ehci_readl(ehci, reg) & ~PORT_RWC_BITS;
Alan Stern16032c42010-05-12 18:21:35 -0400258 u32 t2 = t1 & ~PORT_WAKE_BITS;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700259
Alan Stern8c033562006-11-09 14:42:16 -0500260 /* keep track of which ports we suspend */
Alan Stern383975d2007-05-04 11:52:40 -0400261 if (t1 & PORT_OWNER)
262 set_bit(port, &ehci->owned_ports);
263 else if ((t1 & PORT_PE) && !(t1 & PORT_SUSPEND)) {
Linus Torvalds1da177e2005-04-16 15:20:36 -0700264 t2 |= PORT_SUSPEND;
Alan Stern8c033562006-11-09 14:42:16 -0500265 set_bit(port, &ehci->bus_suspended);
266 }
267
Alan Stern16032c42010-05-12 18:21:35 -0400268 /* enable remote wakeup on all ports, if told to do so */
Alek Du331ac6b2009-07-13 12:41:20 +0800269 if (hcd->self.root_hub->do_remote_wakeup) {
270 /* only enable appropriate wake bits, otherwise the
271 * hardware can not go phy low power mode. If a race
272 * condition happens here(connection change during bits
273 * set), the port change detection will finally fix it.
274 */
Alan Stern16032c42010-05-12 18:21:35 -0400275 if (t1 & PORT_CONNECT)
Alek Du331ac6b2009-07-13 12:41:20 +0800276 t2 |= PORT_WKOC_E | PORT_WKDISC_E;
Alan Stern16032c42010-05-12 18:21:35 -0400277 else
Alek Du331ac6b2009-07-13 12:41:20 +0800278 t2 |= PORT_WKOC_E | PORT_WKCONN_E;
Alan Stern16032c42010-05-12 18:21:35 -0400279 }
Linus Torvalds1da177e2005-04-16 15:20:36 -0700280
281 if (t1 != t2) {
282 ehci_vdbg (ehci, "port %d, %08x -> %08x\n",
283 port + 1, t1, t2);
Benjamin Herrenschmidt083522d2006-12-15 06:54:08 +1100284 ehci_writel(ehci, t2, reg);
Alan Stern16032c42010-05-12 18:21:35 -0400285 changed = 1;
286 }
287 }
Alek Du331ac6b2009-07-13 12:41:20 +0800288
Alan Stern16032c42010-05-12 18:21:35 -0400289 if (changed && ehci->has_hostpc) {
290 spin_unlock_irq(&ehci->lock);
291 msleep(5); /* 5 ms for HCD to enter low-power mode */
292 spin_lock_irq(&ehci->lock);
293
294 port = HCS_N_PORTS(ehci->hcs_params);
295 while (port--) {
296 u32 __iomem *hostpc_reg;
297 u32 t3;
298
299 hostpc_reg = (u32 __iomem *)((u8 *) ehci->regs
300 + HOSTPC0 + 4 * port);
301 t3 = ehci_readl(ehci, hostpc_reg);
302 ehci_writel(ehci, t3 | HOSTPC_PHCD, hostpc_reg);
303 t3 = ehci_readl(ehci, hostpc_reg);
304 ehci_dbg(ehci, "Port %d phy low-power mode %s\n",
Alek Du331ac6b2009-07-13 12:41:20 +0800305 port, (t3 & HOSTPC_PHCD) ?
306 "succeeded" : "failed");
Linus Torvalds1da177e2005-04-16 15:20:36 -0700307 }
308 }
309
Alan Sterncd930c92008-01-10 11:14:53 -0500310 /* Apparently some devices need a >= 1-uframe delay here */
311 if (ehci->bus_suspended)
312 udelay(150);
313
Linus Torvalds1da177e2005-04-16 15:20:36 -0700314 /* turn off now-idle HC */
315 ehci_halt (ehci);
316 hcd->state = HC_STATE_SUSPENDED;
317
David Brownellcdc647a2008-04-02 13:40:20 -0700318 if (ehci->reclaim)
319 end_unlink_async(ehci);
320
Alan Stern8c033562006-11-09 14:42:16 -0500321 /* allow remote wakeup */
322 mask = INTR_MASK;
Alan Stern58a97ff2008-04-14 12:17:10 -0400323 if (!hcd->self.root_hub->do_remote_wakeup)
Alan Stern8c033562006-11-09 14:42:16 -0500324 mask &= ~STS_PCD;
Benjamin Herrenschmidt083522d2006-12-15 06:54:08 +1100325 ehci_writel(ehci, mask, &ehci->regs->intr_enable);
326 ehci_readl(ehci, &ehci->regs->intr_enable);
Alan Stern8c033562006-11-09 14:42:16 -0500327
Linus Torvalds1da177e2005-04-16 15:20:36 -0700328 ehci->next_statechange = jiffies + msecs_to_jiffies(10);
329 spin_unlock_irq (&ehci->lock);
Jon Hunter015798b2009-08-12 11:57:59 -0400330
331 /* ehci_work() may have re-enabled the watchdog timer, which we do not
332 * want, and so we must delete any pending watchdog timer events.
333 */
334 del_timer_sync(&ehci->watchdog);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700335 return 0;
336}
337
338
339/* caller has locked the root hub, and should reset/reinit on error */
Alan Stern0c0382e2005-10-13 17:08:02 -0400340static int ehci_bus_resume (struct usb_hcd *hcd)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700341{
342 struct ehci_hcd *ehci = hcd_to_ehci (hcd);
343 u32 temp;
Alan Stern383975d2007-05-04 11:52:40 -0400344 u32 power_okay;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700345 int i;
Vikram Pandita3a4e72c2008-10-24 23:41:30 +0530346 u8 resume_needed = 0;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700347
348 if (time_before (jiffies, ehci->next_statechange))
349 msleep(5);
350 spin_lock_irq (&ehci->lock);
Alan Stern541c7d42010-06-22 16:39:10 -0400351 if (!HCD_HW_ACCESSIBLE(hcd)) {
Alan Sterncfa59da2007-06-21 16:25:35 -0400352 spin_unlock_irq(&ehci->lock);
353 return -ESHUTDOWN;
354 }
Linus Torvalds1da177e2005-04-16 15:20:36 -0700355
Jason Wesselad45f1d2009-08-20 15:39:58 -0500356 if (unlikely(ehci->debug)) {
Jason Wessel872d3592009-09-23 18:32:44 -0500357 if (!dbgp_reset_prep())
Jason Wesselad45f1d2009-08-20 15:39:58 -0500358 ehci->debug = NULL;
359 else
360 dbgp_external_startup();
361 }
362
David Brownellf03c17f2005-11-23 15:45:28 -0800363 /* Ideally and we've got a real resume here, and no port's power
364 * was lost. (For PCI, that means Vaux was maintained.) But we
365 * could instead be restoring a swsusp snapshot -- so that BIOS was
366 * the last user of the controller, not reset/pm hardware keeping
367 * state we gave to it.
368 */
Alan Stern383975d2007-05-04 11:52:40 -0400369 power_okay = ehci_readl(ehci, &ehci->regs->intr_enable);
370 ehci_dbg(ehci, "resume root hub%s\n",
371 power_okay ? "" : " after power loss");
David Brownellf03c17f2005-11-23 15:45:28 -0800372
Alan Stern8c033562006-11-09 14:42:16 -0500373 /* at least some APM implementations will try to deliver
374 * IRQs right away, so delay them until we're ready.
375 */
Benjamin Herrenschmidt083522d2006-12-15 06:54:08 +1100376 ehci_writel(ehci, 0, &ehci->regs->intr_enable);
Alan Stern8c033562006-11-09 14:42:16 -0500377
378 /* re-init operational registers */
Benjamin Herrenschmidt083522d2006-12-15 06:54:08 +1100379 ehci_writel(ehci, 0, &ehci->regs->segment);
380 ehci_writel(ehci, ehci->periodic_dma, &ehci->regs->frame_list);
381 ehci_writel(ehci, (u32) ehci->async->qh_dma, &ehci->regs->async_next);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700382
383 /* restore CMD_RUN, framelist size, and irq threshold */
Benjamin Herrenschmidt083522d2006-12-15 06:54:08 +1100384 ehci_writel(ehci, ehci->command, &ehci->regs->command);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700385
Alan Sterne198a312007-03-15 15:54:30 -0400386 /* Some controller/firmware combinations need a delay during which
387 * they set up the port statuses. See Bugzilla #8190. */
Vikram Pandita3a4e72c2008-10-24 23:41:30 +0530388 spin_unlock_irq(&ehci->lock);
389 msleep(8);
390 spin_lock_irq(&ehci->lock);
Alan Sterne198a312007-03-15 15:54:30 -0400391
Alan Stern16032c42010-05-12 18:21:35 -0400392 /* clear phy low-power mode before resume */
393 if (ehci->bus_suspended && ehci->has_hostpc) {
394 i = HCS_N_PORTS(ehci->hcs_params);
395 while (i--) {
396 if (test_bit(i, &ehci->bus_suspended)) {
397 u32 __iomem *hostpc_reg;
398
399 hostpc_reg = (u32 __iomem *)((u8 *) ehci->regs
400 + HOSTPC0 + 4 * i);
401 temp = ehci_readl(ehci, hostpc_reg);
402 ehci_writel(ehci, temp & ~HOSTPC_PHCD,
403 hostpc_reg);
404 }
405 }
406 spin_unlock_irq(&ehci->lock);
407 msleep(5);
408 spin_lock_irq(&ehci->lock);
409 }
410
Alan Stern8c033562006-11-09 14:42:16 -0500411 /* manually resume the ports we suspended during bus_suspend() */
Linus Torvalds1da177e2005-04-16 15:20:36 -0700412 i = HCS_N_PORTS (ehci->hcs_params);
413 while (i--) {
Benjamin Herrenschmidt083522d2006-12-15 06:54:08 +1100414 temp = ehci_readl(ehci, &ehci->regs->port_status [i]);
Alan Stern58a97ff2008-04-14 12:17:10 -0400415 temp &= ~(PORT_RWC_BITS | PORT_WAKE_BITS);
Alan Stern8c033562006-11-09 14:42:16 -0500416 if (test_bit(i, &ehci->bus_suspended) &&
Vikram Pandita3a4e72c2008-10-24 23:41:30 +0530417 (temp & PORT_SUSPEND)) {
Linus Torvalds1da177e2005-04-16 15:20:36 -0700418 temp |= PORT_RESUME;
Vikram Pandita3a4e72c2008-10-24 23:41:30 +0530419 resume_needed = 1;
420 }
Benjamin Herrenschmidt083522d2006-12-15 06:54:08 +1100421 ehci_writel(ehci, temp, &ehci->regs->port_status [i]);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700422 }
Vikram Pandita3a4e72c2008-10-24 23:41:30 +0530423
424 /* msleep for 20ms only if code is trying to resume port */
425 if (resume_needed) {
426 spin_unlock_irq(&ehci->lock);
427 msleep(20);
428 spin_lock_irq(&ehci->lock);
429 }
430
Linus Torvalds1da177e2005-04-16 15:20:36 -0700431 i = HCS_N_PORTS (ehci->hcs_params);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700432 while (i--) {
Benjamin Herrenschmidt083522d2006-12-15 06:54:08 +1100433 temp = ehci_readl(ehci, &ehci->regs->port_status [i]);
Alan Stern8c033562006-11-09 14:42:16 -0500434 if (test_bit(i, &ehci->bus_suspended) &&
435 (temp & PORT_SUSPEND)) {
436 temp &= ~(PORT_RWC_BITS | PORT_RESUME);
Benjamin Herrenschmidt083522d2006-12-15 06:54:08 +1100437 ehci_writel(ehci, temp, &ehci->regs->port_status [i]);
Alan Stern8c033562006-11-09 14:42:16 -0500438 ehci_vdbg (ehci, "resumed port %d\n", i + 1);
439 }
Linus Torvalds1da177e2005-04-16 15:20:36 -0700440 }
Benjamin Herrenschmidt083522d2006-12-15 06:54:08 +1100441 (void) ehci_readl(ehci, &ehci->regs->command);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700442
443 /* maybe re-activate the schedule(s) */
444 temp = 0;
445 if (ehci->async->qh_next.qh)
446 temp |= CMD_ASE;
447 if (ehci->periodic_sched)
448 temp |= CMD_PSE;
449 if (temp) {
450 ehci->command |= temp;
Benjamin Herrenschmidt083522d2006-12-15 06:54:08 +1100451 ehci_writel(ehci, ehci->command, &ehci->regs->command);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700452 }
453
454 ehci->next_statechange = jiffies + msecs_to_jiffies(5);
455 hcd->state = HC_STATE_RUNNING;
456
457 /* Now we can safely re-enable irqs */
Benjamin Herrenschmidt083522d2006-12-15 06:54:08 +1100458 ehci_writel(ehci, INTR_MASK, &ehci->regs->intr_enable);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700459
460 spin_unlock_irq (&ehci->lock);
Alan Stern3bb1af52008-03-03 15:15:36 -0500461 ehci_handover_companion_ports(ehci);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700462 return 0;
463}
464
465#else
466
Alan Stern0c0382e2005-10-13 17:08:02 -0400467#define ehci_bus_suspend NULL
468#define ehci_bus_resume NULL
Linus Torvalds1da177e2005-04-16 15:20:36 -0700469
470#endif /* CONFIG_PM */
471
472/*-------------------------------------------------------------------------*/
473
Alan Stern57e06c12007-01-16 11:59:45 -0500474/*
Balaji Rao90da0962007-11-22 01:58:14 +0530475 * Sets the owner of a port
Alan Stern57e06c12007-01-16 11:59:45 -0500476 */
Balaji Rao90da0962007-11-22 01:58:14 +0530477static void set_owner(struct ehci_hcd *ehci, int portnum, int new_owner)
Alan Stern57e06c12007-01-16 11:59:45 -0500478{
Alan Stern57e06c12007-01-16 11:59:45 -0500479 u32 __iomem *status_reg;
480 u32 port_status;
Balaji Rao90da0962007-11-22 01:58:14 +0530481 int try;
Alan Stern57e06c12007-01-16 11:59:45 -0500482
Balaji Rao90da0962007-11-22 01:58:14 +0530483 status_reg = &ehci->regs->port_status[portnum];
Alan Stern57e06c12007-01-16 11:59:45 -0500484
485 /*
486 * The controller won't set the OWNER bit if the port is
487 * enabled, so this loop will sometimes require at least two
488 * iterations: one to disable the port and one to set OWNER.
489 */
Alan Stern57e06c12007-01-16 11:59:45 -0500490 for (try = 4; try > 0; --try) {
491 spin_lock_irq(&ehci->lock);
492 port_status = ehci_readl(ehci, status_reg);
493 if ((port_status & PORT_OWNER) == new_owner
494 || (port_status & (PORT_OWNER | PORT_CONNECT))
495 == 0)
496 try = 0;
497 else {
498 port_status ^= PORT_OWNER;
499 port_status &= ~(PORT_PE | PORT_RWC_BITS);
500 ehci_writel(ehci, port_status, status_reg);
501 }
502 spin_unlock_irq(&ehci->lock);
503 if (try > 1)
504 msleep(5);
505 }
Balaji Rao90da0962007-11-22 01:58:14 +0530506}
507
Alan Stern57e06c12007-01-16 11:59:45 -0500508/*-------------------------------------------------------------------------*/
509
Linus Torvalds1da177e2005-04-16 15:20:36 -0700510static int check_reset_complete (
511 struct ehci_hcd *ehci,
512 int index,
Alan Sterne6316562007-01-16 11:58:00 -0500513 u32 __iomem *status_reg,
Linus Torvalds1da177e2005-04-16 15:20:36 -0700514 int port_status
515) {
David Brownellcd4cdc92008-01-24 12:39:43 -0800516 if (!(port_status & PORT_CONNECT))
Linus Torvalds1da177e2005-04-16 15:20:36 -0700517 return port_status;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700518
519 /* if reset finished and it's still not enabled -- handoff */
520 if (!(port_status & PORT_PE)) {
521
522 /* with integrated TT, there's nobody to hand it to! */
523 if (ehci_is_TDI(ehci)) {
524 ehci_dbg (ehci,
525 "Failed to enable port %d on root hub TT\n",
526 index+1);
527 return port_status;
528 }
529
530 ehci_dbg (ehci, "port %d full speed --> companion\n",
531 index + 1);
532
533 // what happens if HCS_N_CC(params) == 0 ?
534 port_status |= PORT_OWNER;
David Brownell10f65242005-08-31 10:55:38 -0700535 port_status &= ~PORT_RWC_BITS;
Alan Sterne6316562007-01-16 11:58:00 -0500536 ehci_writel(ehci, port_status, status_reg);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700537
Vitaly Bordug796bcae2008-11-09 19:43:30 +0100538 /* ensure 440EPX ohci controller state is operational */
539 if (ehci->has_amcc_usb23)
540 set_ohci_hcfs(ehci, 1);
541 } else {
Linus Torvalds1da177e2005-04-16 15:20:36 -0700542 ehci_dbg (ehci, "port %d high speed\n", index + 1);
Vitaly Bordug796bcae2008-11-09 19:43:30 +0100543 /* ensure 440EPx ohci controller state is suspended */
544 if (ehci->has_amcc_usb23)
545 set_ohci_hcfs(ehci, 0);
546 }
Linus Torvalds1da177e2005-04-16 15:20:36 -0700547
548 return port_status;
549}
550
551/*-------------------------------------------------------------------------*/
552
553
554/* build "status change" packet (one or two bytes) from HC registers */
555
556static int
557ehci_hub_status_data (struct usb_hcd *hcd, char *buf)
558{
559 struct ehci_hcd *ehci = hcd_to_ehci (hcd);
560 u32 temp, status = 0;
David Brownell93f1a472006-11-16 23:34:58 -0800561 u32 mask;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700562 int ports, i, retval = 1;
563 unsigned long flags;
Alek Du5a9cdf32010-06-04 15:47:56 +0800564 u32 ppcd = 0;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700565
566 /* if !USB_SUSPEND, root hub timers won't get shut down ... */
567 if (!HC_IS_RUNNING(hcd->state))
568 return 0;
569
570 /* init status to no-changes */
571 buf [0] = 0;
572 ports = HCS_N_PORTS (ehci->hcs_params);
573 if (ports > 7) {
574 buf [1] = 0;
575 retval++;
576 }
David Brownell53bd6a62006-08-30 14:50:06 -0700577
David Brownell93f1a472006-11-16 23:34:58 -0800578 /* Some boards (mostly VIA?) report bogus overcurrent indications,
579 * causing massive log spam unless we completely ignore them. It
Robert P. J. Day3a4fa0a2007-10-19 23:10:43 +0200580 * may be relevant that VIA VT8235 controllers, where PORT_POWER is
David Brownell93f1a472006-11-16 23:34:58 -0800581 * always set, seem to clear PORT_OCC and PORT_CSC when writing to
582 * PORT_POWER; that's surprising, but maybe within-spec.
583 */
584 if (!ignore_oc)
585 mask = PORT_CSC | PORT_PEC | PORT_OCC;
586 else
587 mask = PORT_CSC | PORT_PEC;
588 // PORT_RESUME from hardware ~= PORT_STAT_C_SUSPEND
589
Linus Torvalds1da177e2005-04-16 15:20:36 -0700590 /* no hub change reports (bit 0) for now (power, ...) */
591
592 /* port N changes (bit N)? */
593 spin_lock_irqsave (&ehci->lock, flags);
Alek Du5a9cdf32010-06-04 15:47:56 +0800594
595 /* get per-port change detect bits */
596 if (ehci->has_ppcd)
597 ppcd = ehci_readl(ehci, &ehci->regs->status) >> 16;
598
Linus Torvalds1da177e2005-04-16 15:20:36 -0700599 for (i = 0; i < ports; i++) {
Alek Du5a9cdf32010-06-04 15:47:56 +0800600 /* leverage per-port change bits feature */
601 if (ehci->has_ppcd && !(ppcd & (1 << i)))
602 continue;
Benjamin Herrenschmidt083522d2006-12-15 06:54:08 +1100603 temp = ehci_readl(ehci, &ehci->regs->port_status [i]);
Alan Stern625b5c92007-01-16 11:58:47 -0500604
605 /*
606 * Return status information even for ports with OWNER set.
607 * Otherwise khubd wouldn't see the disconnect event when a
608 * high-speed device is switched over to the companion
609 * controller by the user.
610 */
611
Alan Sterneafe5b92008-10-06 11:25:53 -0400612 if ((temp & mask) != 0 || test_bit(i, &ehci->port_c_suspend)
613 || (ehci->reset_done[i] && time_after_eq(
614 jiffies, ehci->reset_done[i]))) {
Linus Torvalds1da177e2005-04-16 15:20:36 -0700615 if (i < 7)
616 buf [0] |= 1 << (i + 1);
617 else
618 buf [1] |= 1 << (i - 7);
619 status = STS_PCD;
620 }
621 }
622 /* FIXME autosuspend idle root hubs */
623 spin_unlock_irqrestore (&ehci->lock, flags);
624 return status ? retval : 0;
625}
626
627/*-------------------------------------------------------------------------*/
628
629static void
630ehci_hub_descriptor (
631 struct ehci_hcd *ehci,
632 struct usb_hub_descriptor *desc
633) {
634 int ports = HCS_N_PORTS (ehci->hcs_params);
635 u16 temp;
636
637 desc->bDescriptorType = 0x29;
638 desc->bPwrOn2PwrGood = 10; /* ehci 1.0, 2.3.9 says 20ms max */
639 desc->bHubContrCurrent = 0;
640
641 desc->bNbrPorts = ports;
642 temp = 1 + (ports / 8);
643 desc->bDescLength = 7 + 2 * temp;
644
645 /* two bitmaps: ports removable, and usb 1.0 legacy PortPwrCtrlMask */
John Youndbe79bb2001-09-17 00:00:00 -0700646 memset(&desc->u.hs.DeviceRemovable[0], 0, temp);
647 memset(&desc->u.hs.DeviceRemovable[temp], 0xff, temp);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700648
649 temp = 0x0008; /* per-port overcurrent reporting */
650 if (HCS_PPC (ehci->hcs_params))
651 temp |= 0x0001; /* per-port power control */
David Brownell56c1e262005-04-09 09:00:29 -0700652 else
653 temp |= 0x0002; /* no power switching */
Linus Torvalds1da177e2005-04-16 15:20:36 -0700654#if 0
655// re-enable when we support USB_PORT_FEAT_INDICATOR below.
656 if (HCS_INDICATOR (ehci->hcs_params))
657 temp |= 0x0080; /* per-port indicators (LEDs) */
658#endif
Al Virofd05e722008-04-28 07:00:16 +0100659 desc->wHubCharacteristics = cpu_to_le16(temp);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700660}
661
662/*-------------------------------------------------------------------------*/
663
Linus Torvalds1da177e2005-04-16 15:20:36 -0700664static int ehci_hub_control (
665 struct usb_hcd *hcd,
666 u16 typeReq,
667 u16 wValue,
668 u16 wIndex,
669 char *buf,
670 u16 wLength
671) {
672 struct ehci_hcd *ehci = hcd_to_ehci (hcd);
673 int ports = HCS_N_PORTS (ehci->hcs_params);
Alan Stern383975d2007-05-04 11:52:40 -0400674 u32 __iomem *status_reg = &ehci->regs->port_status[
675 (wIndex & 0xff) - 1];
Alek Du331ac6b2009-07-13 12:41:20 +0800676 u32 __iomem *hostpc_reg = NULL;
677 u32 temp, temp1, status;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700678 unsigned long flags;
679 int retval = 0;
David Brownellf0d7f272006-11-16 23:56:15 -0800680 unsigned selector;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700681
682 /*
683 * FIXME: support SetPortFeatures USB_PORT_FEAT_INDICATOR.
684 * HCS_INDICATOR may say we can change LEDs to off/amber/green.
685 * (track current state ourselves) ... blink for diagnostics,
686 * power, "this is the one", etc. EHCI spec supports this.
687 */
688
Alek Du331ac6b2009-07-13 12:41:20 +0800689 if (ehci->has_hostpc)
690 hostpc_reg = (u32 __iomem *)((u8 *)ehci->regs
691 + HOSTPC0 + 4 * ((wIndex & 0xff) - 1));
Linus Torvalds1da177e2005-04-16 15:20:36 -0700692 spin_lock_irqsave (&ehci->lock, flags);
693 switch (typeReq) {
694 case ClearHubFeature:
695 switch (wValue) {
696 case C_HUB_LOCAL_POWER:
697 case C_HUB_OVER_CURRENT:
698 /* no hub-wide feature/status flags */
699 break;
700 default:
701 goto error;
702 }
703 break;
704 case ClearPortFeature:
705 if (!wIndex || wIndex > ports)
706 goto error;
707 wIndex--;
Alan Sterne6316562007-01-16 11:58:00 -0500708 temp = ehci_readl(ehci, status_reg);
Alan Stern625b5c92007-01-16 11:58:47 -0500709
710 /*
711 * Even if OWNER is set, so the port is owned by the
712 * companion controller, khubd needs to be able to clear
713 * the port-change status bits (especially
Alan Stern749da5f2010-03-04 17:05:08 -0500714 * USB_PORT_STAT_C_CONNECTION).
Alan Stern625b5c92007-01-16 11:58:47 -0500715 */
Linus Torvalds1da177e2005-04-16 15:20:36 -0700716
717 switch (wValue) {
718 case USB_PORT_FEAT_ENABLE:
Alan Sterne6316562007-01-16 11:58:00 -0500719 ehci_writel(ehci, temp & ~PORT_PE, status_reg);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700720 break;
721 case USB_PORT_FEAT_C_ENABLE:
Benjamin Herrenschmidt083522d2006-12-15 06:54:08 +1100722 ehci_writel(ehci, (temp & ~PORT_RWC_BITS) | PORT_PEC,
Alan Sterne6316562007-01-16 11:58:00 -0500723 status_reg);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700724 break;
725 case USB_PORT_FEAT_SUSPEND:
726 if (temp & PORT_RESET)
727 goto error;
David Brownellf8aeb3b2006-01-20 13:55:14 -0800728 if (ehci->no_selective_suspend)
729 break;
Anatolij Gustschin83722bc2011-04-18 22:02:00 +0200730#ifdef CONFIG_USB_OTG
731 if ((hcd->self.otg_port == (wIndex + 1))
732 && hcd->self.b_hnp_enable) {
733 otg_start_hnp(ehci->transceiver);
734 break;
735 }
736#endif
Alan Stern16032c42010-05-12 18:21:35 -0400737 if (!(temp & PORT_SUSPEND))
738 break;
739 if ((temp & PORT_PE) == 0)
740 goto error;
741
742 /* clear phy low-power mode before resume */
743 if (hostpc_reg) {
744 temp1 = ehci_readl(ehci, hostpc_reg);
745 ehci_writel(ehci, temp1 & ~HOSTPC_PHCD,
Alek Dueab80de2010-05-10 11:17:49 +0800746 hostpc_reg);
Alan Stern16032c42010-05-12 18:21:35 -0400747 spin_unlock_irqrestore(&ehci->lock, flags);
748 msleep(5);/* wait to leave low-power mode */
749 spin_lock_irqsave(&ehci->lock, flags);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700750 }
Alan Stern16032c42010-05-12 18:21:35 -0400751 /* resume signaling for 20 msec */
752 temp &= ~(PORT_RWC_BITS | PORT_WAKE_BITS);
753 ehci_writel(ehci, temp | PORT_RESUME, status_reg);
754 ehci->reset_done[wIndex] = jiffies
755 + msecs_to_jiffies(20);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700756 break;
757 case USB_PORT_FEAT_C_SUSPEND:
Alan Sternd1f114d2008-05-20 16:58:58 -0400758 clear_bit(wIndex, &ehci->port_c_suspend);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700759 break;
760 case USB_PORT_FEAT_POWER:
761 if (HCS_PPC (ehci->hcs_params))
Benjamin Herrenschmidt083522d2006-12-15 06:54:08 +1100762 ehci_writel(ehci,
763 temp & ~(PORT_RWC_BITS | PORT_POWER),
Alan Sterne6316562007-01-16 11:58:00 -0500764 status_reg);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700765 break;
766 case USB_PORT_FEAT_C_CONNECTION:
Alek Du48f24972010-06-04 15:47:55 +0800767 if (ehci->has_lpm) {
768 /* clear PORTSC bits on disconnect */
769 temp &= ~PORT_LPM;
770 temp &= ~PORT_DEV_ADDR;
771 }
Benjamin Herrenschmidt083522d2006-12-15 06:54:08 +1100772 ehci_writel(ehci, (temp & ~PORT_RWC_BITS) | PORT_CSC,
Alan Sterne6316562007-01-16 11:58:00 -0500773 status_reg);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700774 break;
775 case USB_PORT_FEAT_C_OVER_CURRENT:
Benjamin Herrenschmidt083522d2006-12-15 06:54:08 +1100776 ehci_writel(ehci, (temp & ~PORT_RWC_BITS) | PORT_OCC,
Alan Sterne6316562007-01-16 11:58:00 -0500777 status_reg);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700778 break;
779 case USB_PORT_FEAT_C_RESET:
780 /* GetPortStatus clears reset */
781 break;
782 default:
783 goto error;
784 }
Benjamin Herrenschmidt083522d2006-12-15 06:54:08 +1100785 ehci_readl(ehci, &ehci->regs->command); /* unblock posted write */
Linus Torvalds1da177e2005-04-16 15:20:36 -0700786 break;
787 case GetHubDescriptor:
788 ehci_hub_descriptor (ehci, (struct usb_hub_descriptor *)
789 buf);
790 break;
791 case GetHubStatus:
792 /* no hub-wide feature/status flags */
793 memset (buf, 0, 4);
794 //cpu_to_le32s ((u32 *) buf);
795 break;
796 case GetPortStatus:
797 if (!wIndex || wIndex > ports)
798 goto error;
799 wIndex--;
800 status = 0;
Alan Sterne6316562007-01-16 11:58:00 -0500801 temp = ehci_readl(ehci, status_reg);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700802
803 // wPortChange bits
804 if (temp & PORT_CSC)
Alan Stern749da5f2010-03-04 17:05:08 -0500805 status |= USB_PORT_STAT_C_CONNECTION << 16;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700806 if (temp & PORT_PEC)
Alan Stern749da5f2010-03-04 17:05:08 -0500807 status |= USB_PORT_STAT_C_ENABLE << 16;
Christian Engelmayer756aa6b2007-05-30 11:04:48 -0700808
809 if ((temp & PORT_OCC) && !ignore_oc){
Alan Stern749da5f2010-03-04 17:05:08 -0500810 status |= USB_PORT_STAT_C_OVERCURRENT << 16;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700811
Christian Engelmayer756aa6b2007-05-30 11:04:48 -0700812 /*
813 * Hubs should disable port power on over-current.
814 * However, not all EHCI implementations do this
815 * automatically, even if they _do_ support per-port
816 * power switching; they're allowed to just limit the
817 * current. khubd will turn the power back on.
818 */
Sergei Shtylyov81463c12011-07-06 23:19:38 +0400819 if ((temp & PORT_OC) && HCS_PPC(ehci->hcs_params)) {
Christian Engelmayer756aa6b2007-05-30 11:04:48 -0700820 ehci_writel(ehci,
821 temp & ~(PORT_RWC_BITS | PORT_POWER),
822 status_reg);
Sergei Shtylyov81463c12011-07-06 23:19:38 +0400823 temp = ehci_readl(ehci, status_reg);
Christian Engelmayer756aa6b2007-05-30 11:04:48 -0700824 }
825 }
826
Linus Torvalds1da177e2005-04-16 15:20:36 -0700827 /* whoever resumes must GetPortStatus to complete it!! */
Alan Stern629e4422007-01-22 16:08:53 -0500828 if (temp & PORT_RESUME) {
Linus Torvalds1da177e2005-04-16 15:20:36 -0700829
Alan Stern629e4422007-01-22 16:08:53 -0500830 /* Remote Wakeup received? */
831 if (!ehci->reset_done[wIndex]) {
832 /* resume signaling for 20 msec */
833 ehci->reset_done[wIndex] = jiffies
834 + msecs_to_jiffies(20);
835 /* check the port again */
836 mod_timer(&ehci_to_hcd(ehci)->rh_timer,
837 ehci->reset_done[wIndex]);
838 }
839
840 /* resume completed? */
841 else if (time_after_eq(jiffies,
842 ehci->reset_done[wIndex])) {
Alan Sterneafe5b92008-10-06 11:25:53 -0400843 clear_bit(wIndex, &ehci->suspended_ports);
Alan Sternd1f114d2008-05-20 16:58:58 -0400844 set_bit(wIndex, &ehci->port_c_suspend);
Alan Stern629e4422007-01-22 16:08:53 -0500845 ehci->reset_done[wIndex] = 0;
846
847 /* stop resume signaling */
848 temp = ehci_readl(ehci, status_reg);
849 ehci_writel(ehci,
Alan Sterne6316562007-01-16 11:58:00 -0500850 temp & ~(PORT_RWC_BITS | PORT_RESUME),
851 status_reg);
Alan Stern629e4422007-01-22 16:08:53 -0500852 retval = handshake(ehci, status_reg,
Benjamin Herrenschmidt083522d2006-12-15 06:54:08 +1100853 PORT_RESUME, 0, 2000 /* 2msec */);
Alan Stern629e4422007-01-22 16:08:53 -0500854 if (retval != 0) {
855 ehci_err(ehci,
856 "port %d resume error %d\n",
857 wIndex + 1, retval);
858 goto error;
859 }
860 temp &= ~(PORT_SUSPEND|PORT_RESUME|(3<<10));
Linus Torvalds1da177e2005-04-16 15:20:36 -0700861 }
Linus Torvalds1da177e2005-04-16 15:20:36 -0700862 }
863
864 /* whoever resets must GetPortStatus to complete it!! */
865 if ((temp & PORT_RESET)
Alan Stern629e4422007-01-22 16:08:53 -0500866 && time_after_eq(jiffies,
867 ehci->reset_done[wIndex])) {
Alan Stern749da5f2010-03-04 17:05:08 -0500868 status |= USB_PORT_STAT_C_RESET << 16;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700869 ehci->reset_done [wIndex] = 0;
870
871 /* force reset to complete */
Benjamin Herrenschmidt083522d2006-12-15 06:54:08 +1100872 ehci_writel(ehci, temp & ~(PORT_RWC_BITS | PORT_RESET),
Alan Sterne6316562007-01-16 11:58:00 -0500873 status_reg);
David Brownellc22fa3a2005-06-13 07:15:28 -0700874 /* REVISIT: some hardware needs 550+ usec to clear
875 * this bit; seems too long to spin routinely...
876 */
Alan Sterne6316562007-01-16 11:58:00 -0500877 retval = handshake(ehci, status_reg,
Dinh Nguyen6307e092010-04-13 11:13:15 -0500878 PORT_RESET, 0, 1000);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700879 if (retval != 0) {
880 ehci_err (ehci, "port %d reset error %d\n",
881 wIndex + 1, retval);
882 goto error;
883 }
884
885 /* see what we found out */
Alan Sterne6316562007-01-16 11:58:00 -0500886 temp = check_reset_complete (ehci, wIndex, status_reg,
887 ehci_readl(ehci, status_reg));
Linus Torvalds1da177e2005-04-16 15:20:36 -0700888 }
889
Alan Sterneafe5b92008-10-06 11:25:53 -0400890 if (!(temp & (PORT_RESUME|PORT_RESET)))
891 ehci->reset_done[wIndex] = 0;
892
Alan Stern57e06c12007-01-16 11:59:45 -0500893 /* transfer dedicated ports to the companion hc */
894 if ((temp & PORT_CONNECT) &&
895 test_bit(wIndex, &ehci->companion_ports)) {
896 temp &= ~PORT_RWC_BITS;
897 temp |= PORT_OWNER;
898 ehci_writel(ehci, temp, status_reg);
899 ehci_dbg(ehci, "port %d --> companion\n", wIndex + 1);
900 temp = ehci_readl(ehci, status_reg);
901 }
902
Alan Stern625b5c92007-01-16 11:58:47 -0500903 /*
904 * Even if OWNER is set, there's no harm letting khubd
905 * see the wPortStatus values (they should all be 0 except
906 * for PORT_POWER anyway).
907 */
908
909 if (temp & PORT_CONNECT) {
Alan Stern749da5f2010-03-04 17:05:08 -0500910 status |= USB_PORT_STAT_CONNECTION;
Alan Stern625b5c92007-01-16 11:58:47 -0500911 // status may be from integrated TT
Alek Du331ac6b2009-07-13 12:41:20 +0800912 if (ehci->has_hostpc) {
913 temp1 = ehci_readl(ehci, hostpc_reg);
914 status |= ehci_port_speed(ehci, temp1);
915 } else
916 status |= ehci_port_speed(ehci, temp);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700917 }
Alan Stern625b5c92007-01-16 11:58:47 -0500918 if (temp & PORT_PE)
Alan Stern749da5f2010-03-04 17:05:08 -0500919 status |= USB_PORT_STAT_ENABLE;
Alan Sterneafe5b92008-10-06 11:25:53 -0400920
921 /* maybe the port was unsuspended without our knowledge */
922 if (temp & (PORT_SUSPEND|PORT_RESUME)) {
Alan Stern749da5f2010-03-04 17:05:08 -0500923 status |= USB_PORT_STAT_SUSPEND;
Alan Sterneafe5b92008-10-06 11:25:53 -0400924 } else if (test_bit(wIndex, &ehci->suspended_ports)) {
925 clear_bit(wIndex, &ehci->suspended_ports);
926 ehci->reset_done[wIndex] = 0;
927 if (temp & PORT_PE)
928 set_bit(wIndex, &ehci->port_c_suspend);
929 }
930
Alan Stern625b5c92007-01-16 11:58:47 -0500931 if (temp & PORT_OC)
Alan Stern749da5f2010-03-04 17:05:08 -0500932 status |= USB_PORT_STAT_OVERCURRENT;
Alan Stern625b5c92007-01-16 11:58:47 -0500933 if (temp & PORT_RESET)
Alan Stern749da5f2010-03-04 17:05:08 -0500934 status |= USB_PORT_STAT_RESET;
Alan Stern625b5c92007-01-16 11:58:47 -0500935 if (temp & PORT_POWER)
Alan Stern749da5f2010-03-04 17:05:08 -0500936 status |= USB_PORT_STAT_POWER;
Alan Sternd1f114d2008-05-20 16:58:58 -0400937 if (test_bit(wIndex, &ehci->port_c_suspend))
Alan Stern749da5f2010-03-04 17:05:08 -0500938 status |= USB_PORT_STAT_C_SUSPEND << 16;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700939
David Brownell9776afc2008-02-01 11:42:05 -0800940#ifndef VERBOSE_DEBUG
Linus Torvalds1da177e2005-04-16 15:20:36 -0700941 if (status & ~0xffff) /* only if wPortChange is interesting */
942#endif
943 dbg_port (ehci, "GetStatus", wIndex + 1, temp);
Harvey Harrisona5abdea2008-04-29 01:03:40 -0700944 put_unaligned_le32(status, buf);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700945 break;
946 case SetHubFeature:
947 switch (wValue) {
948 case C_HUB_LOCAL_POWER:
949 case C_HUB_OVER_CURRENT:
950 /* no hub-wide feature/status flags */
951 break;
952 default:
953 goto error;
954 }
955 break;
956 case SetPortFeature:
David Brownellf0d7f272006-11-16 23:56:15 -0800957 selector = wIndex >> 8;
958 wIndex &= 0xff;
Jason Wessel8d053c72009-08-20 15:39:54 -0500959 if (unlikely(ehci->debug)) {
960 /* If the debug port is active any port
961 * feature requests should get denied */
962 if (wIndex == HCS_DEBUG_PORT(ehci->hcs_params) &&
963 (readl(&ehci->debug->control) & DBGP_ENABLED)) {
964 retval = -ENODEV;
965 goto error_exit;
966 }
967 }
Linus Torvalds1da177e2005-04-16 15:20:36 -0700968 if (!wIndex || wIndex > ports)
969 goto error;
970 wIndex--;
Alan Sterne6316562007-01-16 11:58:00 -0500971 temp = ehci_readl(ehci, status_reg);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700972 if (temp & PORT_OWNER)
973 break;
974
David Brownell10f65242005-08-31 10:55:38 -0700975 temp &= ~PORT_RWC_BITS;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700976 switch (wValue) {
977 case USB_PORT_FEAT_SUSPEND:
David Brownellf8aeb3b2006-01-20 13:55:14 -0800978 if (ehci->no_selective_suspend)
979 break;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700980 if ((temp & PORT_PE) == 0
981 || (temp & PORT_RESET) != 0)
982 goto error;
Alek Dub9df79422010-01-19 16:31:31 +0800983
Alek Du331ac6b2009-07-13 12:41:20 +0800984 /* After above check the port must be connected.
985 * Set appropriate bit thus could put phy into low power
986 * mode if we have hostpc feature
987 */
Alek Dub9df79422010-01-19 16:31:31 +0800988 temp &= ~PORT_WKCONN_E;
989 temp |= PORT_WKDISC_E | PORT_WKOC_E;
990 ehci_writel(ehci, temp | PORT_SUSPEND, status_reg);
Alek Du331ac6b2009-07-13 12:41:20 +0800991 if (hostpc_reg) {
Alek Dub9df79422010-01-19 16:31:31 +0800992 spin_unlock_irqrestore(&ehci->lock, flags);
Alek Du331ac6b2009-07-13 12:41:20 +0800993 msleep(5);/* 5ms for HCD enter low pwr mode */
Alek Dub9df79422010-01-19 16:31:31 +0800994 spin_lock_irqsave(&ehci->lock, flags);
Alek Du331ac6b2009-07-13 12:41:20 +0800995 temp1 = ehci_readl(ehci, hostpc_reg);
996 ehci_writel(ehci, temp1 | HOSTPC_PHCD,
997 hostpc_reg);
998 temp1 = ehci_readl(ehci, hostpc_reg);
999 ehci_dbg(ehci, "Port%d phy low pwr mode %s\n",
1000 wIndex, (temp1 & HOSTPC_PHCD) ?
1001 "succeeded" : "failed");
1002 }
Alan Sterneafe5b92008-10-06 11:25:53 -04001003 set_bit(wIndex, &ehci->suspended_ports);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001004 break;
1005 case USB_PORT_FEAT_POWER:
1006 if (HCS_PPC (ehci->hcs_params))
Benjamin Herrenschmidt083522d2006-12-15 06:54:08 +11001007 ehci_writel(ehci, temp | PORT_POWER,
Alan Sterne6316562007-01-16 11:58:00 -05001008 status_reg);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001009 break;
1010 case USB_PORT_FEAT_RESET:
1011 if (temp & PORT_RESUME)
1012 goto error;
1013 /* line status bits may report this as low speed,
1014 * which can be fine if this root hub has a
1015 * transaction translator built in.
1016 */
1017 if ((temp & (PORT_PE|PORT_CONNECT)) == PORT_CONNECT
1018 && !ehci_is_TDI(ehci)
1019 && PORT_USB11 (temp)) {
1020 ehci_dbg (ehci,
1021 "port %d low speed --> companion\n",
1022 wIndex + 1);
1023 temp |= PORT_OWNER;
1024 } else {
1025 ehci_vdbg (ehci, "port %d reset\n", wIndex + 1);
1026 temp |= PORT_RESET;
1027 temp &= ~PORT_PE;
1028
1029 /*
1030 * caller must wait, then call GetPortStatus
1031 * usb 2.0 spec says 50 ms resets on root
1032 */
1033 ehci->reset_done [wIndex] = jiffies
1034 + msecs_to_jiffies (50);
1035 }
Alan Sterne6316562007-01-16 11:58:00 -05001036 ehci_writel(ehci, temp, status_reg);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001037 break;
David Brownellf0d7f272006-11-16 23:56:15 -08001038
1039 /* For downstream facing ports (these): one hub port is put
1040 * into test mode according to USB2 11.24.2.13, then the hub
1041 * must be reset (which for root hub now means rmmod+modprobe,
1042 * or else system reboot). See EHCI 2.3.9 and 4.14 for info
1043 * about the EHCI-specific stuff.
1044 */
1045 case USB_PORT_FEAT_TEST:
1046 if (!selector || selector > 5)
1047 goto error;
1048 ehci_quiesce(ehci);
1049 ehci_halt(ehci);
1050 temp |= selector << 16;
Alan Sterne6316562007-01-16 11:58:00 -05001051 ehci_writel(ehci, temp, status_reg);
David Brownellf0d7f272006-11-16 23:56:15 -08001052 break;
1053
Linus Torvalds1da177e2005-04-16 15:20:36 -07001054 default:
1055 goto error;
1056 }
Benjamin Herrenschmidt083522d2006-12-15 06:54:08 +11001057 ehci_readl(ehci, &ehci->regs->command); /* unblock posted writes */
Linus Torvalds1da177e2005-04-16 15:20:36 -07001058 break;
1059
1060 default:
1061error:
1062 /* "stall" on error */
1063 retval = -EPIPE;
1064 }
Jason Wessel8d053c72009-08-20 15:39:54 -05001065error_exit:
Linus Torvalds1da177e2005-04-16 15:20:36 -07001066 spin_unlock_irqrestore (&ehci->lock, flags);
1067 return retval;
1068}
Balaji Rao90da0962007-11-22 01:58:14 +05301069
1070static void ehci_relinquish_port(struct usb_hcd *hcd, int portnum)
1071{
1072 struct ehci_hcd *ehci = hcd_to_ehci(hcd);
1073
1074 if (ehci_is_TDI(ehci))
1075 return;
1076 set_owner(ehci, --portnum, PORT_OWNER);
1077}
1078
Alan Stern3a311552008-05-20 16:58:29 -04001079static int ehci_port_handed_over(struct usb_hcd *hcd, int portnum)
1080{
1081 struct ehci_hcd *ehci = hcd_to_ehci(hcd);
1082 u32 __iomem *reg;
1083
1084 if (ehci_is_TDI(ehci))
1085 return 0;
1086 reg = &ehci->regs->port_status[portnum - 1];
1087 return ehci_readl(ehci, reg) & PORT_OWNER;
1088}