resources: Update gapbs' gem5 system configs to run newer Linux kernel

The current system config of gapbs runs into kernel panic due to SWIOTLB.

This commit replaces gapbs system config by boot-exit system config,
which is known to work with most of currently supported Linux kernels.

Signed-off-by: Hoa Nguyen <hoanguyen@ucdavis.edu>
Change-Id: I7468bf7c429bf897bb716e7fd82fc007b6ea19dd
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5-resources/+/41557
Reviewed-by: Bobby R. Bruce <bbruce@ucdavis.edu>
Maintainer: Bobby R. Bruce <bbruce@ucdavis.edu>
Tested-by: Bobby R. Bruce <bbruce@ucdavis.edu>
8 files changed
tree: 90fb9475933987bb03553cffcd12441e0fe0e273
  1. src/
  2. .gitignore
  3. README.md
README.md

gem5 Resources

This repository contains the sources needed to compile the gem5 resources. The compiled resources are found in the gem5 resources bucket, http://dist.gem5.org/dist. Though these resources are not needed to compile or run gem5, they may be required to execute some gem5 tests or may be useful when carrying out specific simulations.

The following sections outline our versioning policy, how to make changes to this repository, and describe each resource and how they may be built.

Versioning

We ensure that for each version of the gem5 source there is a corresponding version of the gem5-resources, with the assumption that version X of the gem5 source will be used with version X of the gem5-resources. The gem5-resources repository contains two branches, develop and stable. The stable branch's HEAD points towards the latest gem5 resources release, which will be the same version id as the that of the latest gem5 source. E.g., if the latest release of gem5 is v20.2.0.0, then the latest release of gem5-resources will be v20.2.0.0, with the HEAD of its stable branch tagged as v20.2.0.0. Previous versions will be tagged within the stable branch. Past versions gem5-resources can thereby be checked out with git checkout <VERSION>. A complete list of versions can be found with git tag. The develop branch contains code under development and will be merged into the stable branch, then tagged, as part of the next release of gem5. More information on gem5 release procedures can be found here. Any release procedures related to the gem5 source can be assumed to be applicable to gem5-resources.

The compiled resources for gem5 can be found under http://dist.gem5.org/dist/{VERSION}. E.g. compiled resources for gem5 v20.2 are under http://dist.gem5.org/dist/v20-1 and are compiled from gem5-resources v20.2. http://dist.gem5.org/dist/develop is kept in sync with the develop branch, and therefore should not be depended upon for stable, regular usage.

Note: Resource files for gem5 v19.0.0.0, our legacy release, can be found under http://dist.gem5.org/dist/current.

Making Changes

Changes to this repository are made to the develop branch via our Gerrit code review system. Therefore, to make changes, first clone the repository checkout the develop branch:

git clone https://gem5.googlesource.com/public/gem5-resources
git checkout --track origin/develop

Then make changes and commit. When ready, push to Gerrit with:

git push origin HEAD:refs/for/develop

The change will then be reviewed via our Gerrit code review system. Once fully accepted and merged into the gem5-resources repository, please contact Bobby R. Bruce bbruce@ucdavis.edu to have the compiled sources uploaded to the gem5 resources bucket.

Resource: RISCV Tests

The RISCV Tests soruce can be found in the src/riscv-tests directory. More information about these tests can be found in src/riscv-tests/README.md.

RISCV Tests Origins

The RISCV Tests in this repository were obtained from https://github.com/riscv/riscv-tests.git, revision 19bfdab48c2a6da4a2c67d5779757da7b073811d.

RISCV Tests Compilation

To compile the RISCV Tests the RISCV GNU Compiler must be installed.

Then, to compile:

cd src/riscv-tests
autoconf
./configure --prefix=/opt/riscv/target
make -C src/riscv-tests

This RISCV binaries can then be found within the src/riscv-tests/benchmarks directory.

RISCV Tests Pre-built binaries

http://dist.gem5.org/dist/v20-1/test-progs/riscv-tests/dhrystone.riscv

http://dist.gem5.org/dist/v20-1/test-progs/riscv-tests/median.riscv

http://dist.gem5.org/dist/v20-1/test-progs/riscv-tests/mm.riscv

http://dist.gem5.org/dist/v20-1/test-progs/riscv-tests/mt-matmul.riscv

http://dist.gem5.org/dist/v20-1/test-progs/riscv-tests/mt-vvadd.riscv

http://dist.gem5.org/dist/v20-1/test-progs/riscv-tests/multiply.riscv

http://dist.gem5.org/dist/v20-1/test-progs/riscv-tests/pmp.riscv

http://dist.gem5.org/dist/v20-1/test-progs/riscv-tests/qsort.riscv

http://dist.gem5.org/dist/v20-1/test-progs/riscv-tests/rsort.riscv

http://dist.gem5.org/dist/v20-1/test-progs/riscv-tests/spmv.riscv

http://dist.gem5.org/dist/v20-1/test-progs/riscv-tests/towers.riscv

http://dist.gem5.org/dist/v20-1/test-progs/riscv-tests/vvadd.riscv

Resource: simple

The simple resources are small binaries, often used to run quick tests and checks in gem5. Their bare-meltal

simple Compilation

Simple single source file per executable userland or baremetal examples.

The toplevel executables under src/simple can be built for any ISA that we have a cross compiler for. The current cross compilers supported are :

Examples that build only for some ISAs specific ones are present under src/simple/<ISA> subdirs, e.g. src/simple/aarch64/,

The ISA names are meant to match uname -m, e.g.:

  • aarch64
  • arm
  • riscv
  • x86_64
  • sparc64

You have to specify the path to the gem5 source code with GEM5_ROOT variable so that m5ops can be used from there. For example for a native build:

cd src/simple
make -j`nproc` GEM5_ROOT=../../../

The default of that variable is such that if you place this repository and the gem5 repository in the same directory:

./gem5/
./gem5-resources/

you can omit that variable and build just with:

make

After the building, the generated files are located under:

./out/<ISA>/

For example, some of the userland executables built on x86 are:

./out/x86_64/user/hello.out
./out/x86_64/user/x86_64/mwait.out

Or if you build for a different ISA:

make ISA=aarch64

some of the executables would be:

./out/aarch64/user/hello.out
./out/aarch64/user/aarch64/futex_ldxr_stxr.out

By default, only userland executables are built. You can build just the baremetal ones instead with:

make ISA=aarch64 bare

or both userland and baremetal with:

make ISA=aarch64 all

A sample baremetal executable generated by this is:

out/aarch64/bare/m5_exit.out

Only ISAs that have a corresponding src/simple/bootloader/ file can build for baremetal, e.g. src/simple/bootloader/aarch64.S.

Note that a some C source files can produce both a baremetal and an userland. For example m5_exit.c produces both:

out/aarch64/bare/m5_exit.out
out/aarch64/user/m5_exit.out

However, since the regular userland toolchain is used rather than a more specialized baremetal toolchain, the C standard library is not available. Therefore, only very few C examples can build for baremetal, notably the ones that use m5ops.

There are also examples that can only build for baremetal, e.g. aarch64/semihost_exit only builds for baremetal, as semihosting is not available on userland.

The simple directory is also able to generate squashfs images containing only a single userland executable at /sbin/init for any of the userland executables. This can be done with a command of type:

make ISA=aarch64 out/aarch64/squashfs/m5_exit.squashfs

Squashfs is a filesystem type that the Linux kernel understands natively, exactly like ext4, except that it is a bit more convenient to create, and write-only.

You can therefore give those squashfs images to gem5 exactly as you would give a normal ext4 raw image, by pointing to it for example with fs.py --disk-image=m5_exit.squashfs as shown at: https://www.gem5.org/documentation/general_docs/fullsystem/building_arm_kernel Linux will then run the given userland executable after Linux boots as the init program.

The initial motivation for this was to generate simple test images for Linux boot.

Since this is a less common use case, squashfs images are not currently generated by any single phony target all at once.

simple Pre-built binaries

http://dist.gem5.org/dist/v20-1/test-progs/pthreads/x86/test_pthread_create_seq

http://dist.gem5.org/dist/v20-1/test-progs/pthreads/x86/test_pthread_create_para

http://dist.gem5.org/dist/v20-1/test-progs/pthreads/x86/test_pthread_mutex

http://dist.gem5.org/dist/v20-1/test-progs/pthreads/x86/test_atomic

http://dist.gem5.org/dist/v20-1/test-progs/pthreads/x86/test_pthread_cond

http://dist.gem5.org/dist/v20-1/test-progs/pthreads/x86/test_std_thread

http://dist.gem5.org/dist/v20-1/test-progs/pthreads/x86/test_std_mutex

http://dist.gem5.org/dist/v20-1/test-progs/pthreads/x86/test_std_condition_variable

http://dist.gem5.org/dist/v20-1/test-progs/pthreads/aarch32/test_pthread_create_seq

http://dist.gem5.org/dist/v20-1/test-progs/pthreads/aarch32/test_pthread_create_para

http://dist.gem5.org/dist/v20-1/test-progs/pthreads/aarch32/test_pthread_mutex

http://dist.gem5.org/dist/v20-1/test-progs/pthreads/aarch32/test_atomic

http://dist.gem5.org/dist/v20-1/test-progs/pthreads/aarch32/test_pthread_cond

http://dist.gem5.org/dist/v20-1/test-progs/pthreads/aarch32/test_std_thread

http://dist.gem5.org/dist/v20-1/test-progs/pthreads/aarch32/test_std_mutex

http://dist.gem5.org/dist/v20-1/test-progs/pthreads/aarch32/test_std_condition_variable

http://dist.gem5.org/dist/v20-1/test-progs/pthreads/aarch64/test_pthread_create_seq

http://dist.gem5.org/dist/v20-1/test-progs/pthreads/aarch64/test_pthread_create_para

http://dist.gem5.org/dist/v20-1/test-progs/pthreads/aarch64/test_pthread_mutex

http://dist.gem5.org/dist/v20-1/test-progs/pthreads/aarch64/test_atomic

http://dist.gem5.org/dist/v20-1/test-progs/pthreads/aarch64/test_pthread_cond

http://dist.gem5.org/dist/v20-1/test-progs/pthreads/aarch64/test_std_thread

http://dist.gem5.org/dist/v20-1/test-progs/pthreads/aarch64/test_std_mutex

http://dist.gem5.org/dist/v20-1/test-progs/pthreads/aarch64/test_std_condition_variable

http://dist.gem5.org/dist/v20-1/test-progs/pthreads/riscv64/test_pthread_create_seq

http://dist.gem5.org/dist/v20-1/test-progs/pthreads/riscv64/test_pthread_create_para

http://dist.gem5.org/dist/v20-1/test-progs/pthreads/riscv64/test_pthread_mutex

http://dist.gem5.org/dist/v20-1/test-progs/pthreads/riscv64/test_atomic

http://dist.gem5.org/dist/v20-1/test-progs/pthreads/riscv64/test_pthread_cond

http://dist.gem5.org/dist/v20-1/test-progs/pthreads/riscv64/test_std_thread

http://dist.gem5.org/dist/v20-1/test-progs/pthreads/riscv64/test_std_mutex

http://dist.gem5.org/dist/v20-1/test-progs/pthreads/riscv64/test_std_condition_variable

http://dist.gem5.org/dist/v20-1/test-progs/pthreads/sparc64/test_pthread_create_seq

http://dist.gem5.org/dist/v20-1/test-progs/pthreads/sparc64/test_pthread_create_para

http://dist.gem5.org/dist/v20-1/test-progs/pthreads/sparc64/test_pthread_mutex

http://dist.gem5.org/dist/v20-1/test-progs/pthreads/sparc64/test_atomic

http://dist.gem5.org/dist/v20-1/test-progs/pthreads/sparc64/test_pthread_cond

http://dist.gem5.org/dist/v20-1/test-progs/pthreads/sparc64/test_std_thread

http://dist.gem5.org/dist/v20-1/test-progs/pthreads/sparc64/test_std_mutex

http://dist.gem5.org/dist/v20-1/test-progs/pthreads/sparc64/test_std_condition_variable

Resource: Square

Square Compilation

To compile:

cd src/square
docker run --rm -v ${PWD}:${PWD} -w ${PWD} -u $UID:$GID gcr.io/gem5-test/gcn-gpu make gfx8-apu

The compiled binary can be found in src/square/bin

Square Pre-built binary

http://dist.gem5.org/dist/v20-1/test-progs/square/square.o

Resource: SPEC 2006

The Standard Performance Evaluation Corporation (SPEC) CPU 2006 benchmarks are designed to provide performance measurements that can be used to compare compute-intensive workloads on different computer systems. SPEC CPU 2006 contains 12 different benchmark tests.

src/spec-2006 provides resources on creating a SPEC 2006 disk image, and necessary scripts to run the SPEC 2006 benchmarks within X86 gem5 simulations. Please consult the src/spec-2006/README.md for more information.

Please note, due to licensing issues, the SPEC 2006 iso cannot be provided as part of this repository.

Resource: SPEC 2017

The Standard Performance Evaluation Corporation (SPEC) CPU 2017 benchmarks are designed to provide performance measurements that can be used to compare compute-intensive workloads on different computer systems. SPEC CPU 2017 contains 43 benchmarks organized into four suites: SPECspeed 2017 Integer, SPECspeed 2017 Floating Point, SPECrate 2017 Integer, and SPECrate 2017 Floating Point.

src/spec-2017 provides resources on creating a SPEC 2017 disk image, and necessary scripts to run the SPEC 2017 benchmarks within X86 gem5 simulations. Please consult the src/spec-2017/README.md for more information.

Please note, due to licensing issues, the SPEC 2017 iso cannot be provided as part of this repository.

Resource: GAP Benchmark Suite (GAPBS) tests

GAPBS is a graph processing benchmark suite and it contains 6 kernels: Breadth-First Search, PageRank, Connected Components, Betweenness Centrality, Single-Source Shortest Paths, and Triangle Counting.

GAPBS Origin

We obtained the GAPBS benchmark suite from http://gap.cs.berkeley.edu/benchmark.html

Building the GAPBS image

src/gapbs contains resources to build a GAPBS disk image which may be used to run the benchmark on gem5 X86 simulations. src/gapbs/README.md contains build and usage instructions.

GAPBS Pre-built disk image

http://dist.gem5.org/dist/v20-1/images/x86/ubuntu-18-04/gapbs.img.gz.

Resource: PARSEC Benchmark Suite

The Princeton Application Repository for Shared-Memory Computers (PARSEC) is a benchmark suite composed of multithreaded programs.

PARSEC Origins

We used PARSEC 3.0, available from https://parsec.cs.princeton.edu.

Building the PARSEC image

In src/parsec we provide the source to build a disk image which may be used, alongside configuration files, to run the PARSEC Benchmark Suite on gem5 architectural simulations. Please consult src/parsec/README.md for build and execution information.

GAPBS Pre-built disk image

http://dist.gem5.org/dist/v20-1/images/x86/ubuntu-18-04/parsec.img.gz.

Resource: NAS Parallel Benchmarks (NPB) Tests

The NAS Parallel Benchmarks (NPB) are a small set of programs designed to help evaluate the performance of parallel supercomputers. The set consists of five Lunux Kernels and three pseudo-applications. gem5 resources provides a disk image, and scripts allowing for the NPB image to be run within gem5 X86 simulations.

NPB Origins

We use NPB 3.4.1, available from https://www.nas.nasa.gov/publications/npb.html.

NPB Building

The npb resources can be found in src/npb. It consists of:

  • npb disk image resources
  • gem5 run scripts to execute these tests

The instructions to build the npb disk image, a Linux kernel binary, and how to use gem5 run scripts to run npb are available in the README file.

NPB Pre-built disk image

http://dist.gem5.org/dist/v20-1/images/x86/ubuntu-18-04/npb.img.gz

Resource: Linux Boot Tests

The Linux boot tests refer to the tests performed with different gem5 configurations to check its ability to boot a Linux kernel. More information on Linux boot tests can be found here.

The boot-tests resources consist of three main components:

  • boot-tests disk image
  • gem5 run scripts to execute boot tests
  • linux kernel configuration files

The instructions to build the boot-tests disk image (boot-exit), the Linux binaries, and how to use gem5 run scripts to run boot-tests are available in this README file.

Resource: Insttest

The Insttests test SPARC instructions.

Creating the SPARC Insttest binary requires a SPARC cross compile. Instructions on creating a cross compiler can be found here.

Insttest Compilation

To compile:

cd src/insttest
make

We provide a docker image with a pre-loaded SPARC cross compiler. To use:

cd src/insttest
docker run --volume $(pwd):$(pwd) -w $(pwd) --rm gcr.io/gem5-test/sparc64-gnu-cross:latest make

The compiled binary can be found in src/insttest/bin.

Insttest Pre-built binary

http://dist.gem5.org/dist/v20-1/test-progs/insttest/bin/sparc/linux/insttest

Resource: Linux Kernel Binary

Contains scripts to create a Linux kernel binary.

Linux Kernel Compilation

Instructions on how to use the scripts can be found here src/linux-kernel/README.md.

Linux Kernel Pre-built binaries

http://dist.gem5.org/dist/v20-1/kernels/x86/static/vmlinux-4.4.186 http://dist.gem5.org/dist/v20-1/kernels/x86/static/vmlinux-4.9.186 http://dist.gem5.org/dist/v20-1/kernels/x86/static/vmlinux-4.14.134 http://dist.gem5.org/dist/v20-1/kernels/x86/static/vmlinux-4.19.83

Licensing

There is no universal license encompassing all this repository's contents. The licences covering the individual gem5 resources are therefore highlighted below.

  • asmtest : src/asmtest/LICENSE.
  • riscv-tests : src/riscv-tests/LICENSE.
  • square: Consult individual copyright notices of source files in src/square.
  • spec 2006: SPEC CPU 2006 requires purchase of benchmark suite from SPEC thus, it cannot be freely distributed. Consult individual copyright notices of source files in src/spec-2006.
  • spec 2017: SPEC CPU 2017 requires purchase of benchmark suite from SPEC thus, it cannot be freely distributed. Consult individual copyright notices of source files in src/spec-2017.
  • gapbs: Consult individual copyright notices of source files in src/gapbs.
  • parsec: The code of the PARSEC project is covered by a 3-Clause BSD License ( src/parsec/disk-image/parsec/parsec-benchmark/LICENSE). For the remaining files, please consult copyright notices in individual source files.
  • npb-tests: Consult individual copyright notices of source files in src/npb. The NAS Parallel Benchmarks utilize a permissive BSD-style license.
  • boot-exit: Consult individual copyright notices of source files in src/boot-exit.
  • insttest: Consult individual copyright notices of source files in src/insttest.
  • linux-kernel: Consult individual copyright notices of source files in src/linux-kernel.
  • hack-back: Consult individual copyright notices of source files in src/hack-back.
  • simple: Consult individual copyright notices of the source files in src/simple.