| # -*- coding: utf-8 -*- |
| # Copyright (c) 2016 Jason Lowe-Power |
| # All rights reserved. |
| # |
| # Redistribution and use in source and binary forms, with or without |
| # modification, are permitted provided that the following conditions are |
| # met: redistributions of source code must retain the above copyright |
| # notice, this list of conditions and the following disclaimer; |
| # redistributions in binary form must reproduce the above copyright |
| # notice, this list of conditions and the following disclaimer in the |
| # documentation and/or other materials provided with the distribution; |
| # neither the name of the copyright holders nor the names of its |
| # contributors may be used to endorse or promote products derived from |
| # this software without specific prior written permission. |
| # |
| # THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS |
| # "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT |
| # LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR |
| # A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT |
| # OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, |
| # SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT |
| # LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, |
| # DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY |
| # THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
| # (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE |
| # OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| # |
| # Authors: Jason Lowe-Power |
| |
| import m5 |
| from m5.objects import * |
| from m5.util import convert |
| |
| import x86 |
| |
| from caches import * |
| |
| class MySystem(LinuxX86System): |
| |
| def __init__(self, opts): |
| super(MySystem, self).__init__() |
| self._opts = opts |
| |
| # Set up the clock domain and the voltage domain |
| self.clk_domain = SrcClockDomain() |
| self.clk_domain.clock = '3GHz' |
| self.clk_domain.voltage_domain = VoltageDomain() |
| |
| # For x86, there is an I/O gap from 3GB to 4GB. |
| # We can have at most 3GB of memory unless we do something special |
| # to account for this I/O gap. For simplicity, this is omitted. |
| mem_size = '512MB' |
| self.mem_ranges = [AddrRange(mem_size), |
| AddrRange(0xC0000000, size=0x100000), # For I/0 |
| ] |
| |
| # Create the main memory bus |
| # This connects to main memory |
| self.membus = SystemXBar() |
| self.membus.badaddr_responder = BadAddr() |
| self.membus.default = self.membus.badaddr_responder.pio |
| |
| # Set up the system port for functional access from the simulator |
| self.system_port = self.membus.slave |
| |
| # This will initialize most of the x86-specific system parameters |
| # This includes things like the I/O, multiprocessor support, BIOS... |
| x86.init_fs(self, self.membus) |
| |
| # Change this path to point to the kernel you want to use |
| # Kernel from http://www.m5sim.org/dist/current/x86/x86-system.tar.bz2 |
| self.kernel = 'binaries/x86_64-vmlinux-2.6.22.9' |
| |
| # Options specified on the kernel command line |
| boot_options = ['earlyprintk=ttyS0', 'console=ttyS0', 'lpj=7999923', |
| 'root=/dev/hda1'] |
| self.boot_osflags = ' '.join(boot_options) |
| |
| # Replace these paths with the path to your disk images. |
| # The first disk is the root disk. The second could be used for swap |
| # or anything else. |
| # Disks from http://www.m5sim.org/dist/current/x86/x86-system.tar.bz2 |
| self.setDiskImage('disks/linux-x86.img') |
| |
| # Create the CPU for our system. |
| self.createCPU() |
| |
| # Create the cache heirarchy for the system. |
| self.createCacheHierarchy() |
| |
| # Create the memory controller for the sytem |
| self.createMemoryControllers() |
| |
| # Set up the interrupt controllers for the system (x86 specific) |
| self.setupInterrupts() |
| |
| def createCPU(self): |
| """ Create a CPU for the system """ |
| # This defaults to one simple atomic CPU. Using other CPU models |
| # and using timing memory is possible as well. |
| # Also, changing this to using multiple CPUs is also possible |
| # Note: If you use multiple CPUs, then the BIOS config needs to be |
| # updated as well. |
| |
| self.cpu = X86AtomicSimpleCPU() |
| self.mem_mode = 'atomic' |
| self.cpu.createThreads() |
| |
| def setDiskImage(self, img_path): |
| """ Set the disk image |
| @param img_path path on the host to the image file for the disk |
| """ |
| # Can have up to two master disk images. |
| # This can be enabled with up to 4 images if using master-slave pairs |
| disk0 = CowDisk(img_path) |
| self.pc.south_bridge.ide.disks = [disk0] |
| |
| def createCacheHierarchy(self): |
| """ Create a simple cache heirarchy with the caches from part1 """ |
| |
| # Create an L1 instruction and data caches and an MMU cache |
| # The MMU cache caches accesses from the inst and data TLBs |
| self.cpu.icache = L1ICache(self._opts) |
| self.cpu.dcache = L1DCache(self._opts) |
| |
| # Connect the instruction, data, and MMU caches to the CPU |
| self.cpu.icache.connectCPU(self.cpu) |
| self.cpu.dcache.connectCPU(self.cpu) |
| |
| # Hook the CPU ports up to the membus |
| self.cpu.icache.connectBus(self.membus) |
| self.cpu.dcache.connectBus(self.membus) |
| |
| # Connect the CPU TLBs directly to the mem. |
| self.cpu.itb.walker.port = self.membus.slave |
| self.cpu.dtb.walker.port = self.membus.slave |
| |
| def createMemoryControllers(self): |
| """ Create the memory controller for the system """ |
| |
| # Just create a controller for the first range, assuming the memory |
| # size is < 3GB this will work. If it's > 3GB or if you want to use |
| # mulitple or interleaved memory controllers then this should be |
| # updated accordingly |
| self.mem_cntrl = DDR3_1600_8x8(range = self.mem_ranges[0], |
| port = self.membus.master) |
| |
| def setupInterrupts(self): |
| """ Create the interrupt controller for the CPU """ |
| |
| # create the interrupt controller for the CPU, connect to the membus |
| self.cpu.createInterruptController() |
| |
| # For x86 only, make sure the interrupts are connected to the memory |
| # Note: these are directly connected to the memory bus, not cached |
| self.cpu.interrupts[0].pio = self.membus.master |
| self.cpu.interrupts[0].int_master = self.membus.slave |
| self.cpu.interrupts[0].int_slave = self.membus.master |
| |
| class CowDisk(IdeDisk): |
| """ Wrapper class around IdeDisk to make a simple copy-on-write disk |
| for gem5. Creates an IDE disk with a COW read/write disk image. |
| Any data written to the disk in gem5 is saved as a COW layer and |
| thrown away on the simulator exit. |
| """ |
| |
| def __init__(self, filename): |
| """ Initialize the disk with a path to the image file. |
| @param filename path to the image file to use for the disk. |
| """ |
| super(CowDisk, self).__init__() |
| self.driveID = 'master' |
| self.image = CowDiskImage(child=RawDiskImage(read_only=True), |
| read_only=False) |
| self.image.child.image_file = filename |
