| /* |
| * Copyright (c) 1999-2008 Mark D. Hill and David A. Wood |
| * All rights reserved. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions are |
| * met: redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer; |
| * redistributions in binary form must reproduce the above copyright |
| * notice, this list of conditions and the following disclaimer in the |
| * documentation and/or other materials provided with the distribution; |
| * neither the name of the copyright holders nor the names of its |
| * contributors may be used to endorse or promote products derived from |
| * this software without specific prior written permission. |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS |
| * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT |
| * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR |
| * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT |
| * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, |
| * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT |
| * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, |
| * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY |
| * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
| * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE |
| * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| */ |
| |
| |
| machine(MachineType:DMA, "DMA Controller") |
| : DMASequencer * dma_sequencer; |
| Cycles request_latency := 6; |
| |
| // Messsage Queues |
| MessageBuffer * responseFromDir, network="From", virtual_network="5", |
| vnet_type="response"; |
| MessageBuffer * reqToDirectory, network="To", virtual_network="0", |
| vnet_type="request"; |
| |
| MessageBuffer * mandatoryQueue; |
| { |
| state_declaration(State, desc="DMA states", default="DMA_State_READY") { |
| READY, AccessPermission:Invalid, desc="Ready to accept a new request"; |
| BUSY_RD, AccessPermission:Busy, desc="Busy: currently processing a request"; |
| BUSY_WR, AccessPermission:Busy, desc="Busy: currently processing a request"; |
| } |
| |
| enumeration(Event, desc="DMA events") { |
| ReadRequest, desc="A new read request"; |
| WriteRequest, desc="A new write request"; |
| Data, desc="Data from a DMA memory read"; |
| Ack, desc="DMA write to memory completed"; |
| } |
| |
| structure(TBE, desc="...") { |
| State TBEState, desc="Transient state"; |
| DataBlock DataBlk, desc="Data"; |
| } |
| |
| structure(TBETable, external = "yes") { |
| TBE lookup(Addr); |
| void allocate(Addr); |
| void deallocate(Addr); |
| bool isPresent(Addr); |
| } |
| |
| void set_tbe(TBE b); |
| void unset_tbe(); |
| void wakeUpAllBuffers(); |
| |
| TBETable TBEs, template="<DMA_TBE>", constructor="m_number_of_TBEs"; |
| |
| Tick clockEdge(); |
| MachineID mapAddressToMachine(Addr addr, MachineType mtype); |
| |
| State getState(TBE tbe, Addr addr) { |
| if (is_valid(tbe)) { |
| return tbe.TBEState; |
| } else { |
| return State:READY; |
| } |
| } |
| |
| void setState(TBE tbe, Addr addr, State state) { |
| if (is_valid(tbe)) { |
| tbe.TBEState := state; |
| } |
| } |
| |
| AccessPermission getAccessPermission(Addr addr) { |
| return AccessPermission:NotPresent; |
| } |
| |
| void setAccessPermission(Addr addr, State state) { |
| } |
| |
| void functionalRead(Addr addr, Packet *pkt) { |
| error("DMA does not support functional read."); |
| } |
| |
| int functionalWrite(Addr addr, Packet *pkt) { |
| error("DMA does not support functional write."); |
| } |
| |
| out_port(reqToDirectory_out, DMARequestMsg, reqToDirectory, desc="..."); |
| |
| in_port(dmaRequestQueue_in, SequencerMsg, mandatoryQueue, desc="...") { |
| if (dmaRequestQueue_in.isReady(clockEdge())) { |
| peek(dmaRequestQueue_in, SequencerMsg) { |
| if (in_msg.Type == SequencerRequestType:LD ) { |
| trigger(Event:ReadRequest, in_msg.LineAddress, TBEs[in_msg.LineAddress]); |
| } else if (in_msg.Type == SequencerRequestType:ST) { |
| trigger(Event:WriteRequest, in_msg.LineAddress, TBEs[in_msg.LineAddress]); |
| } else { |
| error("Invalid request type"); |
| } |
| } |
| } |
| } |
| |
| in_port(dmaResponseQueue_in, DMAResponseMsg, responseFromDir, desc="...") { |
| if (dmaResponseQueue_in.isReady(clockEdge())) { |
| peek( dmaResponseQueue_in, DMAResponseMsg) { |
| if (in_msg.Type == DMAResponseType:ACK) { |
| trigger(Event:Ack, in_msg.LineAddress, TBEs[in_msg.LineAddress]); |
| } else if (in_msg.Type == DMAResponseType:DATA) { |
| trigger(Event:Data, in_msg.LineAddress, TBEs[in_msg.LineAddress]); |
| } else { |
| error("Invalid response type"); |
| } |
| } |
| } |
| } |
| |
| action(s_sendReadRequest, "s", desc="Send a DMA read request to memory") { |
| peek(dmaRequestQueue_in, SequencerMsg) { |
| enqueue(reqToDirectory_out, DMARequestMsg, request_latency) { |
| out_msg.PhysicalAddress := in_msg.PhysicalAddress; |
| out_msg.LineAddress := in_msg.LineAddress; |
| out_msg.Type := DMARequestType:READ; |
| out_msg.Requestor := machineID; |
| out_msg.DataBlk := in_msg.DataBlk; |
| out_msg.Len := in_msg.Len; |
| out_msg.Destination.add(mapAddressToMachine(address, MachineType:Directory)); |
| out_msg.MessageSize := MessageSizeType:Writeback_Control; |
| } |
| } |
| } |
| |
| action(s_sendWriteRequest, "\s", desc="Send a DMA write request to memory") { |
| peek(dmaRequestQueue_in, SequencerMsg) { |
| enqueue(reqToDirectory_out, DMARequestMsg, request_latency) { |
| out_msg.PhysicalAddress := in_msg.PhysicalAddress; |
| out_msg.LineAddress := in_msg.LineAddress; |
| out_msg.Type := DMARequestType:WRITE; |
| out_msg.Requestor := machineID; |
| out_msg.DataBlk := in_msg.DataBlk; |
| out_msg.Len := in_msg.Len; |
| out_msg.Destination.add(mapAddressToMachine(address, MachineType:Directory)); |
| out_msg.MessageSize := MessageSizeType:Writeback_Control; |
| } |
| } |
| } |
| |
| action(a_ackCallback, "a", desc="Notify dma controller that write request completed") { |
| dma_sequencer.ackCallback(address); |
| } |
| |
| action(d_dataCallback, "d", desc="Write data to dma sequencer") { |
| dma_sequencer.dataCallback(tbe.DataBlk, address); |
| } |
| |
| action(t_updateTBEData, "t", desc="Update TBE Data") { |
| assert(is_valid(tbe)); |
| peek(dmaResponseQueue_in, DMAResponseMsg) { |
| tbe.DataBlk := in_msg.DataBlk; |
| } |
| } |
| |
| action(v_allocateTBE, "v", desc="Allocate TBE entry") { |
| TBEs.allocate(address); |
| set_tbe(TBEs[address]); |
| } |
| |
| action(w_deallocateTBE, "w", desc="Deallocate TBE entry") { |
| TBEs.deallocate(address); |
| unset_tbe(); |
| } |
| |
| action(p_popRequestQueue, "p", desc="Pop request queue") { |
| dmaRequestQueue_in.dequeue(clockEdge()); |
| } |
| |
| action(p_popResponseQueue, "\p", desc="Pop request queue") { |
| dmaResponseQueue_in.dequeue(clockEdge()); |
| } |
| |
| action(zz_stallAndWaitRequestQueue, "zz", desc="...") { |
| stall_and_wait(dmaRequestQueue_in, address); |
| } |
| |
| action(wkad_wakeUpAllDependents, "wkad", desc="wake-up all dependents") { |
| wakeUpAllBuffers(); |
| } |
| |
| transition(READY, ReadRequest, BUSY_RD) { |
| v_allocateTBE; |
| s_sendReadRequest; |
| p_popRequestQueue; |
| } |
| |
| transition(READY, WriteRequest, BUSY_WR) { |
| v_allocateTBE; |
| s_sendWriteRequest; |
| p_popRequestQueue; |
| } |
| |
| transition(BUSY_RD, Data, READY) { |
| t_updateTBEData; |
| d_dataCallback; |
| w_deallocateTBE; |
| p_popResponseQueue; |
| wkad_wakeUpAllDependents; |
| } |
| |
| transition(BUSY_WR, Ack, READY) { |
| a_ackCallback; |
| w_deallocateTBE; |
| p_popResponseQueue; |
| wkad_wakeUpAllDependents; |
| } |
| |
| transition({BUSY_RD,BUSY_WR}, {ReadRequest,WriteRequest}) { |
| zz_stallAndWaitRequestQueue; |
| } |
| } |