| # Copyright (c) 2012-2013, 2017-2018 ARM Limited |
| # All rights reserved. |
| # |
| # The license below extends only to copyright in the software and shall |
| # not be construed as granting a license to any other intellectual |
| # property including but not limited to intellectual property relating |
| # to a hardware implementation of the functionality of the software |
| # licensed hereunder. You may use the software subject to the license |
| # terms below provided that you ensure that this notice is replicated |
| # unmodified and in its entirety in all distributions of the software, |
| # modified or unmodified, in source code or in binary form. |
| # |
| # Redistribution and use in source and binary forms, with or without |
| # modification, are permitted provided that the following conditions are |
| # met: redistributions of source code must retain the above copyright |
| # notice, this list of conditions and the following disclaimer; |
| # redistributions in binary form must reproduce the above copyright |
| # notice, this list of conditions and the following disclaimer in the |
| # documentation and/or other materials provided with the distribution; |
| # neither the name of the copyright holders nor the names of its |
| # contributors may be used to endorse or promote products derived from |
| # this software without specific prior written permission. |
| # |
| # THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS |
| # "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT |
| # LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR |
| # A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT |
| # OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, |
| # SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT |
| # LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, |
| # DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY |
| # THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
| # (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE |
| # OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| # |
| # Authors: Andreas Sandberg |
| |
| from m5.params import * |
| from m5.proxy import * |
| from m5.util.fdthelper import * |
| from m5.SimObject import SimObject |
| |
| from m5.objects.Device import PioDevice |
| from m5.objects.Platform import Platform |
| |
| class BaseGic(PioDevice): |
| type = 'BaseGic' |
| abstract = True |
| cxx_header = "dev/arm/base_gic.hh" |
| |
| platform = Param.Platform(Parent.any, "Platform this device is part of.") |
| |
| gicd_iidr = Param.UInt32(0, |
| "Distributor Implementer Identification Register") |
| gicd_pidr = Param.UInt32(0, |
| "Peripheral Identification Register") |
| gicc_iidr = Param.UInt32(0, |
| "CPU Interface Identification Register") |
| gicv_iidr = Param.UInt32(0, |
| "VM CPU Interface Identification Register") |
| |
| class ArmInterruptPin(SimObject): |
| type = 'ArmInterruptPin' |
| cxx_header = "dev/arm/base_gic.hh" |
| cxx_class = "ArmInterruptPinGen" |
| abstract = True |
| |
| platform = Param.Platform(Parent.any, "Platform with interrupt controller") |
| num = Param.UInt32("Interrupt number in GIC") |
| |
| class ArmSPI(ArmInterruptPin): |
| type = 'ArmSPI' |
| cxx_header = "dev/arm/base_gic.hh" |
| cxx_class = "ArmSPIGen" |
| |
| class ArmPPI(ArmInterruptPin): |
| type = 'ArmPPI' |
| cxx_header = "dev/arm/base_gic.hh" |
| cxx_class = "ArmPPIGen" |
| |
| class GicV2(BaseGic): |
| type = 'GicV2' |
| cxx_header = "dev/arm/gic_v2.hh" |
| |
| dist_addr = Param.Addr("Address for distributor") |
| cpu_addr = Param.Addr("Address for cpu") |
| cpu_size = Param.Addr(0x2000, "Size of cpu register bank") |
| dist_pio_delay = Param.Latency('10ns', "Delay for PIO r/w to distributor") |
| cpu_pio_delay = Param.Latency('10ns', "Delay for PIO r/w to cpu interface") |
| int_latency = Param.Latency('10ns', "Delay for interrupt to get to CPU") |
| it_lines = Param.UInt32(128, "Number of interrupt lines supported (max = 1020)") |
| gem5_extensions = Param.Bool(False, "Enable gem5 extensions") |
| |
| class Gic400(GicV2): |
| """ |
| As defined in: |
| "ARM Generic Interrupt Controller Architecture" version 2.0 |
| "CoreLink GIC-400 Generic Interrupt Controller" revision r0p1 |
| """ |
| gicd_pidr = 0x002bb490 |
| gicd_iidr = 0x0200143B |
| gicc_iidr = 0x0202143B |
| |
| # gicv_iidr same as gicc_idr |
| gicv_iidr = gicc_iidr |
| |
| class Gicv2mFrame(SimObject): |
| type = 'Gicv2mFrame' |
| cxx_header = "dev/arm/gic_v2m.hh" |
| spi_base = Param.UInt32(0x0, "Frame SPI base number"); |
| spi_len = Param.UInt32(0x0, "Frame SPI total number"); |
| addr = Param.Addr("Address for frame PIO") |
| |
| class Gicv2m(PioDevice): |
| type = 'Gicv2m' |
| cxx_header = "dev/arm/gic_v2m.hh" |
| |
| pio_delay = Param.Latency('10ns', "Delay for PIO r/w") |
| gic = Param.BaseGic(Parent.any, "Gic on which to trigger interrupts") |
| frames = VectorParam.Gicv2mFrame([], "Power of two number of frames") |
| |
| class VGic(PioDevice): |
| type = 'VGic' |
| cxx_header = "dev/arm/vgic.hh" |
| gic = Param.BaseGic(Parent.any, "Gic to use for interrupting") |
| platform = Param.Platform(Parent.any, "Platform this device is part of.") |
| vcpu_addr = Param.Addr(0, "Address for vcpu interfaces") |
| hv_addr = Param.Addr(0, "Address for hv control") |
| pio_delay = Param.Latency('10ns', "Delay for PIO r/w") |
| # The number of list registers is not currently configurable at runtime. |
| maint_int = Param.UInt32("HV maintenance interrupt number") |
| |
| # gicv_iidr same as gicc_idr |
| gicv_iidr = Param.UInt32(Self.gic.gicc_iidr, |
| "VM CPU Interface Identification Register") |
| |
| def generateDeviceTree(self, state): |
| gic = self.gic.unproxy(self) |
| |
| node = FdtNode("interrupt-controller") |
| node.appendCompatible(["gem5,gic", "arm,cortex-a15-gic", |
| "arm,cortex-a9-gic"]) |
| node.append(FdtPropertyWords("#interrupt-cells", [3])) |
| node.append(FdtPropertyWords("#address-cells", [0])) |
| node.append(FdtProperty("interrupt-controller")) |
| |
| regs = ( |
| state.addrCells(gic.dist_addr) + |
| state.sizeCells(0x1000) + |
| state.addrCells(gic.cpu_addr) + |
| state.sizeCells(0x1000) + |
| state.addrCells(self.hv_addr) + |
| state.sizeCells(0x2000) + |
| state.addrCells(self.vcpu_addr) + |
| state.sizeCells(0x2000) ) |
| |
| node.append(FdtPropertyWords("reg", regs)) |
| node.append(FdtPropertyWords("interrupts", |
| [1, int(self.maint_int)-16, 0xf04])) |
| |
| node.appendPhandle(gic) |
| |
| yield node |
| |
| class Gicv3(BaseGic): |
| type = 'Gicv3' |
| cxx_header = "dev/arm/gic_v3.hh" |
| |
| dist_addr = Param.Addr("Address for distributor") |
| dist_pio_delay = Param.Latency('10ns', "Delay for PIO r/w to distributor") |
| redist_addr = Param.Addr("Address for redistributors") |
| redist_pio_delay = Param.Latency('10ns', |
| "Delay for PIO r/w to redistributors") |
| it_lines = Param.UInt32(1020, |
| "Number of interrupt lines supported (max = 1020)") |
| |
| maint_int = Param.ArmInterruptPin( |
| "HV maintenance interrupt." |
| "ARM strongly recommends that maintenance interrupts " |
| "are configured to use INTID 25 (PPI Interrupt).") |
| |
| cpu_max = Param.Unsigned(256, |
| "Maximum number of PE. This is affecting the maximum number of " |
| "redistributors") |
| |
| gicv4 = Param.Bool(True, "GICv4 extension available") |