src/cpu/o3/FuncUnitConfig.py

# Copyright (c) 2010, 2017 ARM Limited
# All rights reserved.
#
# The license below extends only to copyright in the software and shall
# not be construed as granting a license to any other intellectual
# property including but not limited to intellectual property relating
# to a hardware implementation of the functionality of the software
# licensed hereunder.  You may use the software subject to the license
# terms below provided that you ensure that this notice is replicated
# unmodified and in its entirety in all distributions of the software,
# modified or unmodified, in source code or in binary form.
#
# Copyright (c) 2006-2007 The Regents of The University of Michigan
# All rights reserved.
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions are
# met: redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer;
# redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in the
# documentation and/or other materials provided with the distribution;
# neither the name of the copyright holders nor the names of its
# contributors may be used to endorse or promote products derived from
# this software without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

from m5.SimObject import SimObject
from m5.defines import buildEnv
from m5.params import *

from m5.objects.FuncUnit import *

class IntALU(FUDesc):
    opList = [ OpDesc(opClass='IntAlu') ]
    count = 6

class IntMultDiv(FUDesc):
    opList = [ OpDesc(opClass='IntMult', opLat=3),
               OpDesc(opClass='IntDiv', opLat=20, pipelined=False) ]

    # DIV and IDIV instructions in x86 are implemented using a loop which
    # issues division microops.  The latency of these microops should really be
    # one (or a small number) cycle each since each of these computes one bit
    # of the quotient.
    if buildEnv['TARGET_ISA'] in ('x86'):
        opList[1].opLat=1

    count=2

class FP_ALU(FUDesc):
    opList = [ OpDesc(opClass='FloatAdd', opLat=2),
               OpDesc(opClass='FloatCmp', opLat=2),
               OpDesc(opClass='FloatCvt', opLat=2) ]
    count = 4

class FP_MultDiv(FUDesc):
    opList = [ OpDesc(opClass='FloatMult', opLat=4),
               OpDesc(opClass='FloatMultAcc', opLat=5),
               OpDesc(opClass='FloatMisc', opLat=3),
               OpDesc(opClass='FloatDiv', opLat=12, pipelined=False),
               OpDesc(opClass='FloatSqrt', opLat=24, pipelined=False) ]
    count = 2

class SIMD_Unit(FUDesc):
    opList = [ OpDesc(opClass='SimdAdd'),
               OpDesc(opClass='SimdAddAcc'),
               OpDesc(opClass='SimdAlu'),
               OpDesc(opClass='SimdCmp'),
               OpDesc(opClass='SimdCvt'),
               OpDesc(opClass='SimdMisc'),
               OpDesc(opClass='SimdMult'),
               OpDesc(opClass='SimdMultAcc'),
               OpDesc(opClass='SimdShift'),
               OpDesc(opClass='SimdShiftAcc'),
               OpDesc(opClass='SimdDiv'),
               OpDesc(opClass='SimdSqrt'),
               OpDesc(opClass='SimdFloatAdd'),
               OpDesc(opClass='SimdFloatAlu'),
               OpDesc(opClass='SimdFloatCmp'),
               OpDesc(opClass='SimdFloatCvt'),
               OpDesc(opClass='SimdFloatDiv'),
               OpDesc(opClass='SimdFloatMisc'),
               OpDesc(opClass='SimdFloatMult'),
               OpDesc(opClass='SimdFloatMultAcc'),
               OpDesc(opClass='SimdFloatSqrt'),
               OpDesc(opClass='SimdReduceAdd'),
               OpDesc(opClass='SimdReduceAlu'),
               OpDesc(opClass='SimdReduceCmp'),
               OpDesc(opClass='SimdFloatReduceAdd'),
               OpDesc(opClass='SimdFloatReduceCmp') ]
    count = 4

class PredALU(FUDesc):
    opList = [ OpDesc(opClass='SimdPredAlu') ]
    count = 1

class ReadPort(FUDesc):
    opList = [ OpDesc(opClass='MemRead'),
               OpDesc(opClass='FloatMemRead') ]
    count = 0

class WritePort(FUDesc):
    opList = [ OpDesc(opClass='MemWrite'),
               OpDesc(opClass='FloatMemWrite') ]
    count = 0

class RdWrPort(FUDesc):
    opList = [ OpDesc(opClass='MemRead'), OpDesc(opClass='MemWrite'),
               OpDesc(opClass='FloatMemRead'), OpDesc(opClass='FloatMemWrite')]
    count = 4

class IprPort(FUDesc):
    opList = [ OpDesc(opClass='IprAccess', opLat = 3, pipelined = False) ]
    count = 1