| # Copyright (c) 2015 Advanced Micro Devices, Inc. | |
| # All rights reserved. | |
| # | |
| # For use for simulation and test purposes only | |
| # | |
| # Redistribution and use in source and binary forms, with or without | |
| # modification, are permitted provided that the following conditions are met: | |
| # | |
| # 1. Redistributions of source code must retain the above copyright notice, | |
| # this list of conditions and the following disclaimer. | |
| # | |
| # 2. Redistributions in binary form must reproduce the above copyright notice, | |
| # this list of conditions and the following disclaimer in the documentation | |
| # and/or other materials provided with the distribution. | |
| # | |
| # 3. Neither the name of the copyright holder nor the names of its | |
| # contributors may be used to endorse or promote products derived from this | |
| # software without specific prior written permission. | |
| # | |
| # THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" | |
| # AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE | |
| # IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE | |
| # ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE | |
| # LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR | |
| # CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF | |
| # SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS | |
| # INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN | |
| # CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) | |
| # ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE | |
| # POSSIBILITY OF SUCH DAMAGE. | |
| import argparse, os, re, getpass | |
| import math | |
| import glob | |
| import inspect | |
| import m5 | |
| from m5.objects import * | |
| from m5.util import addToPath | |
| addToPath('../') | |
| from ruby import Ruby | |
| from common import Options | |
| from common import Simulation | |
| from common import GPUTLBOptions, GPUTLBConfig | |
| import hsaTopology | |
| from common import FileSystemConfig | |
| # Adding script options | |
| parser = argparse.ArgumentParser() | |
| Options.addCommonOptions(parser) | |
| Options.addSEOptions(parser) | |
| parser.add_argument("--cpu-only-mode", action="store_true", default=False, | |
| help="APU mode. Used to take care of problems in " | |
| "Ruby.py while running APU protocols") | |
| parser.add_argument("-u", "--num-compute-units", type=int, default=4, | |
| help="number of GPU compute units"), | |
| parser.add_argument("--num-cp", type=int, default=0, | |
| help="Number of GPU Command Processors (CP)") | |
| parser.add_argument("--benchmark-root", | |
| help="Root of benchmark directory tree") | |
| # not super important now, but to avoid putting the number 4 everywhere, make | |
| # it an option/knob | |
| parser.add_argument("--cu-per-sqc", type=int, default=4, help="number of CUs" | |
| "sharing an SQC (icache, and thus icache TLB)") | |
| parser.add_argument('--cu-per-scalar-cache', type=int, default=4, | |
| help='Number of CUs sharing a scalar cache') | |
| parser.add_argument("--simds-per-cu", type=int, default=4, help="SIMD units" | |
| "per CU") | |
| parser.add_argument('--cu-per-sa', type=int, default=4, | |
| help='Number of CUs per shader array. This must be a ' | |
| 'multiple of options.cu-per-sqc and options.cu-per-scalar') | |
| parser.add_argument('--sa-per-complex', type=int, default=1, | |
| help='Number of shader arrays per complex') | |
| parser.add_argument('--num-gpu-complexes', type=int, default=1, | |
| help='Number of GPU complexes') | |
| parser.add_argument("--wf-size", type=int, default=64, | |
| help="Wavefront size(in workitems)") | |
| parser.add_argument("--sp-bypass-path-length", type=int, default=4, | |
| help="Number of stages of bypass path in vector ALU for " | |
| "Single Precision ops") | |
| parser.add_argument("--dp-bypass-path-length", type=int, default=4, | |
| help="Number of stages of bypass path in vector ALU for " | |
| "Double Precision ops") | |
| # issue period per SIMD unit: number of cycles before issuing another vector | |
| parser.add_argument( | |
| "--issue-period", type=int, default=4, | |
| help="Number of cycles per vector instruction issue period") | |
| parser.add_argument("--glbmem-wr-bus-width", type=int, default=32, | |
| help="VGPR to Coalescer (Global Memory) data bus width " | |
| "in bytes") | |
| parser.add_argument("--glbmem-rd-bus-width", type=int, default=32, | |
| help="Coalescer to VGPR (Global Memory) data bus width in " | |
| "bytes") | |
| # Currently we only support 1 local memory pipe | |
| parser.add_argument("--shr-mem-pipes-per-cu", type=int, default=1, | |
| help="Number of Shared Memory pipelines per CU") | |
| # Currently we only support 1 global memory pipe | |
| parser.add_argument("--glb-mem-pipes-per-cu", type=int, default=1, | |
| help="Number of Global Memory pipelines per CU") | |
| parser.add_argument("--wfs-per-simd", type=int, default=10, help="Number of " | |
| "WF slots per SIMD") | |
| parser.add_argument("--registerManagerPolicy", type=str, default="static", | |
| help="Register manager policy") | |
| parser.add_argument("--vreg-file-size", type=int, default=2048, | |
| help="number of physical vector registers per SIMD") | |
| parser.add_argument("--vreg-min-alloc", type=int, default=4, | |
| help="Minimum number of registers that can be allocated " | |
| "from the VRF. The total number of registers will be " | |
| "aligned to this value.") | |
| parser.add_argument("--sreg-file-size", type=int, default=2048, | |
| help="number of physical vector registers per SIMD") | |
| parser.add_argument("--sreg-min-alloc", type=int, default=4, | |
| help="Minimum number of registers that can be allocated " | |
| "from the SRF. The total number of registers will be " | |
| "aligned to this value.") | |
| parser.add_argument("--bw-scalor", type=int, default=0, | |
| help="bandwidth scalor for scalability analysis") | |
| parser.add_argument("--CPUClock", type=str, default="2GHz", | |
| help="CPU clock") | |
| parser.add_argument("--gpu-clock", type=str, default="1GHz", | |
| help="GPU clock") | |
| parser.add_argument("--cpu-voltage", action="store", type=str, | |
| default='1.0V', | |
| help="""CPU voltage domain""") | |
| parser.add_argument("--gpu-voltage", action="store", type=str, | |
| default='1.0V', | |
| help="""CPU voltage domain""") | |
| parser.add_argument("--CUExecPolicy", type=str, default="OLDEST-FIRST", | |
| help="WF exec policy (OLDEST-FIRST, ROUND-ROBIN)") | |
| parser.add_argument("--SegFaultDebug", action="store_true", | |
| help="checks for GPU seg fault before TLB access") | |
| parser.add_argument("--FunctionalTLB", action="store_true", | |
| help="Assumes TLB has no latency") | |
| parser.add_argument("--LocalMemBarrier", action="store_true", | |
| help="Barrier does not wait for writethroughs to complete") | |
| parser.add_argument( | |
| "--countPages", action="store_true", | |
| help="Count Page Accesses and output in per-CU output files") | |
| parser.add_argument("--TLB-prefetch", type=int, help="prefetch depth for" | |
| "TLBs") | |
| parser.add_argument("--pf-type", type=str, help="type of prefetch: " | |
| "PF_CU, PF_WF, PF_PHASE, PF_STRIDE") | |
| parser.add_argument("--pf-stride", type=int, help="set prefetch stride") | |
| parser.add_argument("--numLdsBanks", type=int, default=32, | |
| help="number of physical banks per LDS module") | |
| parser.add_argument("--ldsBankConflictPenalty", type=int, default=1, | |
| help="number of cycles per LDS bank conflict") | |
| parser.add_argument("--lds-size", type=int, default=65536, | |
| help="Size of the LDS in bytes") | |
| parser.add_argument('--fast-forward-pseudo-op', action='store_true', | |
| help='fast forward using kvm until the m5_switchcpu' | |
| ' pseudo-op is encountered, then switch cpus. subsequent' | |
| ' m5_switchcpu pseudo-ops will toggle back and forth') | |
| parser.add_argument("--num-hw-queues", type=int, default=10, | |
| help="number of hw queues in packet processor") | |
| parser.add_argument("--reg-alloc-policy", type=str, default="simple", | |
| help="register allocation policy (simple/dynamic)") | |
| parser.add_argument("--dgpu", action="store_true", default=False, | |
| help="Configure the system as a dGPU instead of an APU. " | |
| "The dGPU config has its own local memory pool and is not " | |
| "coherent with the host through hardware. Data is " | |
| "transfered from host to device memory using runtime calls " | |
| "that copy data over a PCIe-like IO bus.") | |
| # Mtype option | |
| #-- 1 1 1 C_RW_S (Cached-ReadWrite-Shared) | |
| #-- 1 1 0 C_RW_US (Cached-ReadWrite-Unshared) | |
| #-- 1 0 1 C_RO_S (Cached-ReadOnly-Shared) | |
| #-- 1 0 0 C_RO_US (Cached-ReadOnly-Unshared) | |
| #-- 0 1 x UC_L2 (Uncached_GL2) | |
| #-- 0 0 x UC_All (Uncached_All_Load) | |
| # default value: 5/C_RO_S (only allow caching in GL2 for read. Shared) | |
| parser.add_argument("--m-type", type=int, default=5, | |
| help="Default Mtype for GPU memory accesses. This is the " | |
| "value used for all memory accesses on an APU and is the " | |
| "default mode for dGPU unless explicitly overwritten by " | |
| "the driver on a per-page basis. Valid values are " | |
| "between 0-7") | |
| parser.add_argument("--gfx-version", type=str, default='gfx801', | |
| choices=GfxVersion.vals, | |
| help="Gfx version for gpu" | |
| "Note: gfx902 is not fully supported by ROCm") | |
| Ruby.define_options(parser) | |
| # add TLB options to the parser | |
| GPUTLBOptions.tlb_options(parser) | |
| args = parser.parse_args() | |
| # The GPU cache coherence protocols only work with the backing store | |
| args.access_backing_store = True | |
| # if benchmark root is specified explicitly, that overrides the search path | |
| if args.benchmark_root: | |
| benchmark_path = [args.benchmark_root] | |
| else: | |
| # Set default benchmark search path to current dir | |
| benchmark_path = ['.'] | |
| ########################## Sanity Check ######################## | |
| # Currently the gpu model requires ruby | |
| if buildEnv['PROTOCOL'] == 'None': | |
| fatal("GPU model requires ruby") | |
| # Currently the gpu model requires only timing or detailed CPU | |
| if not (args.cpu_type == "TimingSimpleCPU" or | |
| args.cpu_type == "DerivO3CPU"): | |
| fatal("GPU model requires TimingSimpleCPU or DerivO3CPU") | |
| # This file can support multiple compute units | |
| assert(args.num_compute_units >= 1) | |
| # Currently, the sqc (I-Cache of GPU) is shared by | |
| # multiple compute units(CUs). The protocol works just fine | |
| # even if sqc is not shared. Overriding this option here | |
| # so that the user need not explicitly set this (assuming | |
| # sharing sqc is the common usage) | |
| n_cu = args.num_compute_units | |
| num_sqc = int(math.ceil(float(n_cu) / args.cu_per_sqc)) | |
| args.num_sqc = num_sqc # pass this to Ruby | |
| num_scalar_cache = int(math.ceil(float(n_cu) / args.cu_per_scalar_cache)) | |
| args.num_scalar_cache = num_scalar_cache | |
| print('Num SQC = ', num_sqc, 'Num scalar caches = ', num_scalar_cache, | |
| 'Num CU = ', n_cu) | |
| ########################## Creating the GPU system ######################## | |
| # shader is the GPU | |
| shader = Shader(n_wf = args.wfs_per_simd, | |
| clk_domain = SrcClockDomain( | |
| clock = args.gpu_clock, | |
| voltage_domain = VoltageDomain( | |
| voltage = args.gpu_voltage))) | |
| # VIPER GPU protocol implements release consistency at GPU side. So, | |
| # we make their writes visible to the global memory and should read | |
| # from global memory during kernal boundary. The pipeline initiates | |
| # (or do not initiate) the acquire/release operation depending on | |
| # these impl_kern_launch_rel and impl_kern_end_rel flags. The flag=true | |
| # means pipeline initiates a acquire/release operation at kernel launch/end. | |
| # VIPER protocol is write-through based, and thus only impl_kern_launch_acq | |
| # needs to set. | |
| if (buildEnv['PROTOCOL'] == 'GPU_VIPER'): | |
| shader.impl_kern_launch_acq = True | |
| shader.impl_kern_end_rel = False | |
| else: | |
| shader.impl_kern_launch_acq = True | |
| shader.impl_kern_end_rel = True | |
| # Switching off per-lane TLB by default | |
| per_lane = False | |
| if args.TLB_config == "perLane": | |
| per_lane = True | |
| # List of compute units; one GPU can have multiple compute units | |
| compute_units = [] | |
| for i in range(n_cu): | |
| compute_units.append(ComputeUnit(cu_id = i, perLaneTLB = per_lane, | |
| num_SIMDs = args.simds_per_cu, | |
| wf_size = args.wf_size, | |
| spbypass_pipe_length = \ | |
| args.sp_bypass_path_length, | |
| dpbypass_pipe_length = \ | |
| args.dp_bypass_path_length, | |
| issue_period = args.issue_period, | |
| coalescer_to_vrf_bus_width = \ | |
| args.glbmem_rd_bus_width, | |
| vrf_to_coalescer_bus_width = \ | |
| args.glbmem_wr_bus_width, | |
| num_global_mem_pipes = \ | |
| args.glb_mem_pipes_per_cu, | |
| num_shared_mem_pipes = \ | |
| args.shr_mem_pipes_per_cu, | |
| n_wf = args.wfs_per_simd, | |
| execPolicy = args.CUExecPolicy, | |
| debugSegFault = args.SegFaultDebug, | |
| functionalTLB = args.FunctionalTLB, | |
| localMemBarrier = args.LocalMemBarrier, | |
| countPages = args.countPages, | |
| localDataStore = \ | |
| LdsState(banks = args.numLdsBanks, | |
| bankConflictPenalty = \ | |
| args.ldsBankConflictPenalty, | |
| size = args.lds_size))) | |
| wavefronts = [] | |
| vrfs = [] | |
| vrf_pool_mgrs = [] | |
| srfs = [] | |
| srf_pool_mgrs = [] | |
| for j in range(args.simds_per_cu): | |
| for k in range(shader.n_wf): | |
| wavefronts.append(Wavefront(simdId = j, wf_slot_id = k, | |
| wf_size = args.wf_size)) | |
| if args.reg_alloc_policy == "simple": | |
| vrf_pool_mgrs.append(SimplePoolManager(pool_size = \ | |
| args.vreg_file_size, | |
| min_alloc = \ | |
| args.vreg_min_alloc)) | |
| srf_pool_mgrs.append(SimplePoolManager(pool_size = \ | |
| args.sreg_file_size, | |
| min_alloc = \ | |
| args.vreg_min_alloc)) | |
| elif args.reg_alloc_policy == "dynamic": | |
| vrf_pool_mgrs.append(DynPoolManager(pool_size = \ | |
| args.vreg_file_size, | |
| min_alloc = \ | |
| args.vreg_min_alloc)) | |
| srf_pool_mgrs.append(DynPoolManager(pool_size = \ | |
| args.sreg_file_size, | |
| min_alloc = \ | |
| args.vreg_min_alloc)) | |
| vrfs.append(VectorRegisterFile(simd_id=j, wf_size=args.wf_size, | |
| num_regs=args.vreg_file_size)) | |
| srfs.append(ScalarRegisterFile(simd_id=j, wf_size=args.wf_size, | |
| num_regs=args.sreg_file_size)) | |
| compute_units[-1].wavefronts = wavefronts | |
| compute_units[-1].vector_register_file = vrfs | |
| compute_units[-1].scalar_register_file = srfs | |
| compute_units[-1].register_manager = \ | |
| RegisterManager(policy=args.registerManagerPolicy, | |
| vrf_pool_managers=vrf_pool_mgrs, | |
| srf_pool_managers=srf_pool_mgrs) | |
| if args.TLB_prefetch: | |
| compute_units[-1].prefetch_depth = args.TLB_prefetch | |
| compute_units[-1].prefetch_prev_type = args.pf_type | |
| # attach the LDS and the CU to the bus (actually a Bridge) | |
| compute_units[-1].ldsPort = compute_units[-1].ldsBus.cpu_side_port | |
| compute_units[-1].ldsBus.mem_side_port = \ | |
| compute_units[-1].localDataStore.cuPort | |
| # Attach compute units to GPU | |
| shader.CUs = compute_units | |
| ########################## Creating the CPU system ######################## | |
| # The shader core will be whatever is after the CPU cores are accounted for | |
| shader_idx = args.num_cpus | |
| # The command processor will be whatever is after the shader is accounted for | |
| cp_idx = shader_idx + 1 | |
| cp_list = [] | |
| # List of CPUs | |
| cpu_list = [] | |
| CpuClass, mem_mode = Simulation.getCPUClass(args.cpu_type) | |
| if CpuClass == AtomicSimpleCPU: | |
| fatal("AtomicSimpleCPU is not supported") | |
| if mem_mode != 'timing': | |
| fatal("Only the timing memory mode is supported") | |
| shader.timing = True | |
| if args.fast_forward and args.fast_forward_pseudo_op: | |
| fatal("Cannot fast-forward based both on the number of instructions and" | |
| " on pseudo-ops") | |
| fast_forward = args.fast_forward or args.fast_forward_pseudo_op | |
| if fast_forward: | |
| FutureCpuClass, future_mem_mode = CpuClass, mem_mode | |
| CpuClass = X86KvmCPU | |
| mem_mode = 'atomic_noncaching' | |
| # Leave shader.timing untouched, because its value only matters at the | |
| # start of the simulation and because we require switching cpus | |
| # *before* the first kernel launch. | |
| future_cpu_list = [] | |
| # Initial CPUs to be used during fast-forwarding. | |
| for i in range(args.num_cpus): | |
| cpu = CpuClass(cpu_id = i, | |
| clk_domain = SrcClockDomain( | |
| clock = args.CPUClock, | |
| voltage_domain = VoltageDomain( | |
| voltage = args.cpu_voltage))) | |
| cpu_list.append(cpu) | |
| if args.fast_forward: | |
| cpu.max_insts_any_thread = int(args.fast_forward) | |
| if fast_forward: | |
| MainCpuClass = FutureCpuClass | |
| else: | |
| MainCpuClass = CpuClass | |
| # CPs to be used throughout the simulation. | |
| for i in range(args.num_cp): | |
| cp = MainCpuClass(cpu_id = args.num_cpus + i, | |
| clk_domain = SrcClockDomain( | |
| clock = args.CPUClock, | |
| voltage_domain = VoltageDomain( | |
| voltage = args.cpu_voltage))) | |
| cp_list.append(cp) | |
| # Main CPUs (to be used after fast-forwarding if fast-forwarding is specified). | |
| for i in range(args.num_cpus): | |
| cpu = MainCpuClass(cpu_id = i, | |
| clk_domain = SrcClockDomain( | |
| clock = args.CPUClock, | |
| voltage_domain = VoltageDomain( | |
| voltage = args.cpu_voltage))) | |
| if fast_forward: | |
| cpu.switched_out = True | |
| future_cpu_list.append(cpu) | |
| else: | |
| cpu_list.append(cpu) | |
| host_cpu = cpu_list[0] | |
| hsapp_gpu_map_vaddr = 0x200000000 | |
| hsapp_gpu_map_size = 0x1000 | |
| hsapp_gpu_map_paddr = int(Addr(args.mem_size)) | |
| if args.dgpu: | |
| # Default --m-type for dGPU is write-back gl2 with system coherence | |
| # (coherence at the level of the system directory between other dGPUs and | |
| # CPUs) managed by kernel boundary flush operations targeting the gl2. | |
| args.m_type = 6 | |
| # HSA kernel mode driver | |
| # dGPUPoolID is 0 because we only have one memory pool | |
| gpu_driver = GPUComputeDriver(filename = "kfd", isdGPU = args.dgpu, | |
| gfxVersion = args.gfx_version, | |
| dGPUPoolID = 0, m_type = args.m_type) | |
| renderDriNum = 128 | |
| render_driver = GPURenderDriver(filename = f'dri/renderD{renderDriNum}') | |
| # Creating the GPU kernel launching components: that is the HSA | |
| # packet processor (HSAPP), GPU command processor (CP), and the | |
| # dispatcher. | |
| gpu_hsapp = HSAPacketProcessor(pioAddr=hsapp_gpu_map_paddr, | |
| numHWQueues=args.num_hw_queues) | |
| dispatcher = GPUDispatcher() | |
| gpu_cmd_proc = GPUCommandProcessor(hsapp=gpu_hsapp, | |
| dispatcher=dispatcher) | |
| gpu_driver.device = gpu_cmd_proc | |
| shader.dispatcher = dispatcher | |
| shader.gpu_cmd_proc = gpu_cmd_proc | |
| # Create and assign the workload Check for rel_path in elements of | |
| # base_list using test, returning the first full path that satisfies test | |
| def find_path(base_list, rel_path, test): | |
| for base in base_list: | |
| if not base: | |
| # base could be None if environment var not set | |
| continue | |
| full_path = os.path.join(base, rel_path) | |
| if test(full_path): | |
| return full_path | |
| fatal("%s not found in %s" % (rel_path, base_list)) | |
| def find_file(base_list, rel_path): | |
| return find_path(base_list, rel_path, os.path.isfile) | |
| executable = find_path(benchmark_path, args.cmd, os.path.exists) | |
| # It's common for a benchmark to be in a directory with the same | |
| # name as the executable, so we handle that automatically | |
| if os.path.isdir(executable): | |
| benchmark_path = [executable] | |
| executable = find_file(benchmark_path, args.cmd) | |
| if args.env: | |
| with open(args.env, 'r') as f: | |
| env = [line.rstrip() for line in f] | |
| else: | |
| env = ['LD_LIBRARY_PATH=%s' % ':'.join([ | |
| os.getenv('ROCM_PATH','/opt/rocm')+'/lib', | |
| os.getenv('HCC_HOME','/opt/rocm/hcc')+'/lib', | |
| os.getenv('HSA_PATH','/opt/rocm/hsa')+'/lib', | |
| os.getenv('HIP_PATH','/opt/rocm/hip')+'/lib', | |
| os.getenv('ROCM_PATH','/opt/rocm')+'/libhsakmt/lib', | |
| os.getenv('ROCM_PATH','/opt/rocm')+'/miopen/lib', | |
| os.getenv('ROCM_PATH','/opt/rocm')+'/miopengemm/lib', | |
| os.getenv('ROCM_PATH','/opt/rocm')+'/hipblas/lib', | |
| os.getenv('ROCM_PATH','/opt/rocm')+'/rocblas/lib', | |
| "/usr/lib/x86_64-linux-gnu" | |
| ]), | |
| 'HOME=%s' % os.getenv('HOME','/'), | |
| # Disable the VM fault handler signal creation for dGPUs also | |
| # forces the use of DefaultSignals instead of driver-controlled | |
| # InteruptSignals throughout the runtime. DefaultSignals poll | |
| # on memory in the runtime, while InteruptSignals call into the | |
| # driver. | |
| "HSA_ENABLE_INTERRUPT=1", | |
| # We don't have an SDMA hardware model, so need to fallback to | |
| # vector copy kernels for dGPU memcopies to/from host and device. | |
| "HSA_ENABLE_SDMA=0"] | |
| process = Process(executable = executable, cmd = [args.cmd] | |
| + args.options.split(), | |
| drivers = [gpu_driver, render_driver], env = env) | |
| for cpu in cpu_list: | |
| cpu.createThreads() | |
| cpu.workload = process | |
| for cp in cp_list: | |
| cp.workload = host_cpu.workload | |
| if fast_forward: | |
| for i in range(len(future_cpu_list)): | |
| future_cpu_list[i].workload = cpu_list[i].workload | |
| future_cpu_list[i].createThreads() | |
| ########################## Create the overall system ######################## | |
| # List of CPUs that must be switched when moving between KVM and simulation | |
| if fast_forward: | |
| switch_cpu_list = \ | |
| [(cpu_list[i], future_cpu_list[i]) for i in range(args.num_cpus)] | |
| # Full list of processing cores in the system. | |
| cpu_list = cpu_list + [shader] + cp_list | |
| # creating the overall system | |
| # notice the cpu list is explicitly added as a parameter to System | |
| system = System(cpu = cpu_list, | |
| mem_ranges = [AddrRange(args.mem_size)], | |
| cache_line_size = args.cacheline_size, | |
| mem_mode = mem_mode, | |
| workload = SEWorkload.init_compatible(executable)) | |
| if fast_forward: | |
| system.future_cpu = future_cpu_list | |
| system.voltage_domain = VoltageDomain(voltage = args.sys_voltage) | |
| system.clk_domain = SrcClockDomain(clock = args.sys_clock, | |
| voltage_domain = system.voltage_domain) | |
| if fast_forward: | |
| have_kvm_support = 'BaseKvmCPU' in globals() | |
| if have_kvm_support and buildEnv['TARGET_ISA'] == "x86": | |
| system.vm = KvmVM() | |
| for i in range(len(host_cpu.workload)): | |
| host_cpu.workload[i].useArchPT = True | |
| host_cpu.workload[i].kvmInSE = True | |
| else: | |
| fatal("KvmCPU can only be used in SE mode with x86") | |
| # configure the TLB hierarchy | |
| GPUTLBConfig.config_tlb_hierarchy(args, system, shader_idx) | |
| # create Ruby system | |
| system.piobus = IOXBar(width=32, response_latency=0, | |
| frontend_latency=0, forward_latency=0) | |
| dma_list = [gpu_hsapp, gpu_cmd_proc] | |
| Ruby.create_system(args, None, system, None, dma_list, None) | |
| system.ruby.clk_domain = SrcClockDomain(clock = args.ruby_clock, | |
| voltage_domain = system.voltage_domain) | |
| gpu_cmd_proc.pio = system.piobus.mem_side_ports | |
| gpu_hsapp.pio = system.piobus.mem_side_ports | |
| for i, dma_device in enumerate(dma_list): | |
| exec('system.dma_cntrl%d.clk_domain = system.ruby.clk_domain' % i) | |
| # attach the CPU ports to Ruby | |
| for i in range(args.num_cpus): | |
| ruby_port = system.ruby._cpu_ports[i] | |
| # Create interrupt controller | |
| system.cpu[i].createInterruptController() | |
| # Connect cache port's to ruby | |
| system.cpu[i].icache_port = ruby_port.in_ports | |
| system.cpu[i].dcache_port = ruby_port.in_ports | |
| ruby_port.mem_request_port = system.piobus.cpu_side_ports | |
| if buildEnv['TARGET_ISA'] == "x86": | |
| system.cpu[i].interrupts[0].pio = system.piobus.mem_side_ports | |
| system.cpu[i].interrupts[0].int_requestor = \ | |
| system.piobus.cpu_side_ports | |
| system.cpu[i].interrupts[0].int_responder = \ | |
| system.piobus.mem_side_ports | |
| if fast_forward: | |
| system.cpu[i].mmu.connectWalkerPorts( | |
| ruby_port.in_ports, ruby_port.in_ports) | |
| # attach CU ports to Ruby | |
| # Because of the peculiarities of the CP core, you may have 1 CPU but 2 | |
| # sequencers and thus 2 _cpu_ports created. Your GPUs shouldn't be | |
| # hooked up until after the CP. To make this script generic, figure out | |
| # the index as below, but note that this assumes there is one sequencer | |
| # per compute unit and one sequencer per SQC for the math to work out | |
| # correctly. | |
| gpu_port_idx = len(system.ruby._cpu_ports) \ | |
| - args.num_compute_units - args.num_sqc \ | |
| - args.num_scalar_cache | |
| gpu_port_idx = gpu_port_idx - args.num_cp * 2 | |
| # Connect token ports. For this we need to search through the list of all | |
| # sequencers, since the TCP coalescers will not necessarily be first. Only | |
| # TCP coalescers use a token port for back pressure. | |
| token_port_idx = 0 | |
| for i in range(len(system.ruby._cpu_ports)): | |
| if isinstance(system.ruby._cpu_ports[i], VIPERCoalescer): | |
| system.cpu[shader_idx].CUs[token_port_idx].gmTokenPort = \ | |
| system.ruby._cpu_ports[i].gmTokenPort | |
| token_port_idx += 1 | |
| wavefront_size = args.wf_size | |
| for i in range(n_cu): | |
| # The pipeline issues wavefront_size number of uncoalesced requests | |
| # in one GPU issue cycle. Hence wavefront_size mem ports. | |
| for j in range(wavefront_size): | |
| system.cpu[shader_idx].CUs[i].memory_port[j] = \ | |
| system.ruby._cpu_ports[gpu_port_idx].in_ports[j] | |
| gpu_port_idx += 1 | |
| for i in range(n_cu): | |
| if i > 0 and not i % args.cu_per_sqc: | |
| print("incrementing idx on ", i) | |
| gpu_port_idx += 1 | |
| system.cpu[shader_idx].CUs[i].sqc_port = \ | |
| system.ruby._cpu_ports[gpu_port_idx].in_ports | |
| gpu_port_idx = gpu_port_idx + 1 | |
| for i in range(n_cu): | |
| if i > 0 and not i % args.cu_per_scalar_cache: | |
| print("incrementing idx on ", i) | |
| gpu_port_idx += 1 | |
| system.cpu[shader_idx].CUs[i].scalar_port = \ | |
| system.ruby._cpu_ports[gpu_port_idx].in_ports | |
| gpu_port_idx = gpu_port_idx + 1 | |
| # attach CP ports to Ruby | |
| for i in range(args.num_cp): | |
| system.cpu[cp_idx].createInterruptController() | |
| system.cpu[cp_idx].dcache_port = \ | |
| system.ruby._cpu_ports[gpu_port_idx + i * 2].in_ports | |
| system.cpu[cp_idx].icache_port = \ | |
| system.ruby._cpu_ports[gpu_port_idx + i * 2 + 1].in_ports | |
| system.cpu[cp_idx].interrupts[0].pio = system.piobus.mem_side_ports | |
| system.cpu[cp_idx].interrupts[0].int_requestor = \ | |
| system.piobus.cpu_side_ports | |
| system.cpu[cp_idx].interrupts[0].int_responder = \ | |
| system.piobus.mem_side_ports | |
| cp_idx = cp_idx + 1 | |
| ################# Connect the CPU and GPU via GPU Dispatcher ################## | |
| # CPU rings the GPU doorbell to notify a pending task | |
| # using this interface. | |
| # And GPU uses this interface to notify the CPU of task completion | |
| # The communcation happens through emulated driver. | |
| # Note this implicit setting of the cpu_pointer, shader_pointer and tlb array | |
| # parameters must be after the explicit setting of the System cpu list | |
| if fast_forward: | |
| shader.cpu_pointer = future_cpu_list[0] | |
| else: | |
| shader.cpu_pointer = host_cpu | |
| ########################## Start simulation ######################## | |
| redirect_paths = [RedirectPath(app_path = "/proc", | |
| host_paths = | |
| ["%s/fs/proc" % m5.options.outdir]), | |
| RedirectPath(app_path = "/sys", | |
| host_paths = | |
| ["%s/fs/sys" % m5.options.outdir]), | |
| RedirectPath(app_path = "/tmp", | |
| host_paths = | |
| ["%s/fs/tmp" % m5.options.outdir])] | |
| system.redirect_paths = redirect_paths | |
| root = Root(system=system, full_system=False) | |
| # Create the /sys/devices filesystem for the simulator so that the HSA Runtime | |
| # knows what type of GPU hardware we are simulating | |
| if args.dgpu: | |
| assert (args.gfx_version in ['gfx803', 'gfx900']),\ | |
| "Incorrect gfx version for dGPU" | |
| if args.gfx_version == 'gfx803': | |
| hsaTopology.createFijiTopology(args) | |
| elif args.gfx_version == 'gfx900': | |
| hsaTopology.createVegaTopology(args) | |
| else: | |
| assert (args.gfx_version in ['gfx801', 'gfx902']),\ | |
| "Incorrect gfx version for APU" | |
| hsaTopology.createCarrizoTopology(args) | |
| m5.ticks.setGlobalFrequency('1THz') | |
| if args.abs_max_tick: | |
| maxtick = args.abs_max_tick | |
| else: | |
| maxtick = m5.MaxTick | |
| # Benchmarks support work item annotations | |
| Simulation.setWorkCountOptions(system, args) | |
| # Checkpointing is not supported by APU model | |
| if (args.checkpoint_dir != None or | |
| args.checkpoint_restore != None): | |
| fatal("Checkpointing not supported by apu model") | |
| checkpoint_dir = None | |
| m5.instantiate(checkpoint_dir) | |
| # Map workload to this address space | |
| host_cpu.workload[0].map(0x10000000, 0x200000000, 4096) | |
| if args.fast_forward: | |
| print("Switch at instruction count: %d" % cpu_list[0].max_insts_any_thread) | |
| exit_event = m5.simulate(maxtick) | |
| if args.fast_forward: | |
| if exit_event.getCause() == "a thread reached the max instruction count": | |
| m5.switchCpus(system, switch_cpu_list) | |
| print("Switched CPUS @ tick %s" % (m5.curTick())) | |
| m5.stats.reset() | |
| exit_event = m5.simulate(maxtick - m5.curTick()) | |
| elif args.fast_forward_pseudo_op: | |
| while exit_event.getCause() == "switchcpu": | |
| # If we are switching *to* kvm, then the current stats are meaningful | |
| # Note that we don't do any warmup by default | |
| if type(switch_cpu_list[0][0]) == FutureCpuClass: | |
| print("Dumping stats...") | |
| m5.stats.dump() | |
| m5.switchCpus(system, switch_cpu_list) | |
| print("Switched CPUS @ tick %s" % (m5.curTick())) | |
| m5.stats.reset() | |
| # This lets us switch back and forth without keeping a counter | |
| switch_cpu_list = [(x[1], x[0]) for x in switch_cpu_list] | |
| exit_event = m5.simulate(maxtick - m5.curTick()) | |
| print("Ticks:", m5.curTick()) | |
| print('Exiting because ', exit_event.getCause()) | |
| sys.exit(exit_event.getCode()) |