stdlib,configs: Adding a config to run PARSEC using stdlib.
This change adds a config file to execute PARSEC benchmarks using
gem5 stdlib. It also adds a new test for the same.
Change-Id: I2dfaae388f4a697911ef7894b35f7bfccd7e4761
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/52943
Reviewed-by: Bobby Bruce <bbruce@ucdavis.edu>
Maintainer: Bobby Bruce <bbruce@ucdavis.edu>
Tested-by: kokoro <noreply+kokoro@google.com>
diff --git a/configs/example/gem5_library/x86-parsec-benchmarks.py b/configs/example/gem5_library/x86-parsec-benchmarks.py
new file mode 100644
index 0000000..c3dd9ea
--- /dev/null
+++ b/configs/example/gem5_library/x86-parsec-benchmarks.py
@@ -0,0 +1,295 @@
+# Copyright (c) 2021 The Regents of the University of California.
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are
+# met: redistributions of source code must retain the above copyright
+# notice, this list of conditions and the following disclaimer;
+# redistributions in binary form must reproduce the above copyright
+# notice, this list of conditions and the following disclaimer in the
+# documentation and/or other materials provided with the distribution;
+# neither the name of the copyright holders nor the names of its
+# contributors may be used to endorse or promote products derived from
+# this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+"""
+Script to run PARSEC benchmarks with gem5.
+The script expects a benchmark program name and the simulation
+size. The system is fixed with 2 CPU cores, MESI Two Level system
+cache and 3 GB DDR4 memory. It uses the x86 board.
+
+This script will count the total number of instructions executed
+in the ROI. It also tracks how much wallclock and simulated time.
+
+Usage:
+------
+
+```
+scons build/X86/gem5.opt
+./build/X86/gem5.opt \
+ configs/example/gem5_library/x86-parsec-benchmarks.py \
+ --benchmark <benchmark_name> \
+ --size <simulation_size>
+```
+"""
+import argparse
+import time
+
+import m5
+from m5.objects import Root
+
+from gem5.utils.requires import requires
+from gem5.components.boards.x86_board import X86Board
+from gem5.components.memory import DualChannelDDR4_2400
+from gem5.components.processors.simple_switchable_processor import(
+ SimpleSwitchableProcessor,
+)
+from gem5.components.processors.cpu_types import CPUTypes
+from gem5.isas import ISA
+from gem5.coherence_protocol import CoherenceProtocol
+from gem5.resources.resource import Resource
+
+from m5.stats.gem5stats import get_simstat
+
+# We check for the required gem5 build.
+
+requires(
+ isa_required = ISA.X86,
+ coherence_protocol_required=CoherenceProtocol.MESI_TWO_LEVEL,
+ kvm_required=True,
+)
+
+# Following are the list of benchmark programs for parsec.
+
+benchmark_choices = ["blackscholes", "bodytrack", "canneal", "dedup",
+ "facesim", "ferret", "fluidanimate", "freqmine",
+ "raytrace", "streamcluster", "swaptions", "vips", "x264"]
+
+# Following are the input size.
+
+size_choices=["simsmall", "simmedium", "simlarge"]
+
+parser = argparse.ArgumentParser(
+ description="An example configuration script to run the npb benchmarks."
+)
+
+# The arguments accepted are the benchmark name and the simulation size.
+
+parser.add_argument(
+ "--benchmark",
+ type = str,
+ required=True,
+ help = "Input the benchmark program to execute.",
+ choices = benchmark_choices,
+)
+
+parser.add_argument(
+ "--size",
+ type = str,
+ required=True,
+ help = "Simulation size the benchmark program.",
+ choices = size_choices,
+)
+args = parser.parse_args()
+
+# Setting up all the fixed system parameters here
+# Caches: MESI Two Level Cache Hierarchy
+
+from gem5.components.cachehierarchies.ruby.\
+ mesi_two_level_cache_hierarchy import(
+ MESITwoLevelCacheHierarchy,
+)
+
+cache_hierarchy = MESITwoLevelCacheHierarchy(
+ l1d_size = "32kB",
+ l1d_assoc = 8,
+ l1i_size="32kB",
+ l1i_assoc=8,
+ l2_size="256kB",
+ l2_assoc=16,
+ num_l2_banks=2,
+)
+
+# Memory: Dual Channel DDR4 2400 DRAM device.
+# The X86 board only supports 3 GB of main memory.
+
+memory = DualChannelDDR4_2400(size = "3GB")
+
+# Here we setup the processor. This is a special switchable processor in which
+# a starting core type and a switch core type must be specified. Once a
+# configuration is instantiated a user may call `processor.switch()` to switch
+# from the starting core types to the switch core types. In this simulation
+# we start with KVM cores to simulate the OS boot, then switch to the Timing
+# cores for the command we wish to run after boot.
+
+processor = SimpleSwitchableProcessor(
+ starting_core_type=CPUTypes.KVM,
+ switch_core_type=CPUTypes.TIMING,
+ num_cores=2,
+)
+
+# Here we setup the board. The X86Board allows for Full-System X86 simulations
+
+board = X86Board(
+ clk_freq="3GHz",
+ processor=processor,
+ memory=memory,
+ cache_hierarchy=cache_hierarchy,
+)
+
+# Here we set the FS workload, i.e., parsec benchmark
+# After simulation has ended you may inspect
+# `m5out/system.pc.com_1.device` to the stdout, if any.
+
+# After the system boots, we execute the benchmark program and wait till the
+# ROI `workbegin` annotation is reached (m5_work_begin()). We start collecting
+# the number of committed instructions till ROI ends (marked by `workend`).
+# We then finish executing the rest of the benchmark.
+
+# Also, we sleep the system for some time so that the output is printed
+# properly.
+
+
+command = "cd /home/gem5/parsec-benchmark;".format(args.benchmark) \
+ + "source env.sh;" \
+ + "parsecmgmt -a run -p {} -c gcc-hooks -i {} \
+ -n {};".format(args.benchmark, args.size, "2") \
+ + "sleep 5;" \
+ + "m5 exit;" \
+
+board.set_kernel_disk_workload(
+ # The x86 linux kernel will be automatically downloaded to the
+ # `~/.cache/gem5` directory if not already present.
+ # PARSEC benchamarks were tested with kernel version 4.19.83
+ kernel=Resource(
+ "x86-linux-kernel-4.19.83",
+ ),
+ # The x86-parsec image will be automatically downloaded to the
+ # `~/.cache/gem5` directory if not already present.
+ disk_image=Resource(
+ "x86-parsec",
+ ),
+ readfile_contents=command,
+)
+
+# We need this for long running processes.
+m5.disableAllListeners()
+
+root = Root(full_system = True, system = board)
+
+# sim_quantum must be set if KVM cores are used.
+
+root.sim_quantum = int(1e9)
+
+m5.instantiate()
+
+# We maintain the wall clock time.
+
+globalStart = time.time()
+
+print("Running the simulation")
+print("Using KVM cpu")
+
+start_tick = m5.curTick()
+end_tick = m5.curTick()
+m5.stats.reset()
+
+# We start the simulation
+
+exit_event = m5.simulate()
+
+# The first exit_event ends with a `workbegin` cause. This means that the
+# system booted successfully and the execution on the program started.
+
+if exit_event.getCause() == "workbegin":
+
+ print("Done booting Linux")
+ print("Resetting stats at the start of ROI!")
+
+ m5.stats.reset()
+ start_tick = m5.curTick()
+
+ # We have completed up to this step using KVM cpu. Now we switch to timing
+ # cpu for detailed simulation.
+
+ processor.switch()
+else:
+ # `workbegin` call was never encountered.
+
+ print("Unexpected termination of simulation before ROI was reached!")
+ print(
+ "Exiting @ tick {} because {}.".format(
+ m5.curTick(),
+ exit_event.getCause()
+ )
+ )
+ exit(-1)
+
+# The next exit_event is to simulate the ROI. It should be exited with a cause
+# marked by `workend`.
+
+exit_event = m5.simulate()
+
+# Reached the end of ROI.
+# We dump the stats here.
+
+# We exepect that ROI ends with `workend`. Otherwise the simulation ended
+# unexpectedly.
+if exit_event.getCause() == "workend":
+ print("Dump stats at the end of the ROI!")
+
+ m5.stats.dump()
+ end_tick = m5.curTick()
+else:
+ print("Unexpected termination of simulation while ROI was being executed!")
+ print(
+ "Exiting @ tick {} because {}.".format(
+ m5.curTick(),
+ exit_event.getCause()
+ )
+ )
+ exit(-1)
+
+# ROI has ended here, and we get `simInsts` using get_simstat and print it in
+# the final print statement.
+
+gem5stats = get_simstat(root)
+
+# We get the number of committed instructions from the timing
+# cores. We then sum and print them at the end.
+roi_insts = float(\
+ gem5stats.to_json()\
+ ["system"]["processor"]["cores2"]["core"]["exec_context.thread_0"]\
+ ["numInsts"]["value"]) + float(\
+ gem5stats.to_json()\
+ ["system"]["processor"]["cores3"]["core"]["exec_context.thread_0"]\
+ ["numInsts"]["value"]\
+)
+
+# Simulation is over at this point. We acknowledge that all the simulation
+# events were successful.
+print("All simulation events were successful.")
+
+# We print the final simulation statistics.
+
+print("Done with the simulation")
+print()
+print("Performance statistics:")
+
+print("Simulated time in ROI: %.2fs" % ((end_tick-start_tick)/1e12))
+print("Instructions executed in ROI: %d" % ((roi_insts)))
+print("Ran a total of", m5.curTick()/1e12, "simulated seconds")
+print("Total wallclock time: %.2fs, %.2f min" % \
+ (time.time()-globalStart, (time.time()-globalStart)/60))
diff --git a/tests/gem5/gem5_library_example_tests/test_gem5_library_examples.py b/tests/gem5/gem5_library_example_tests/test_gem5_library_examples.py
index a2bbf28..efa838d 100644
--- a/tests/gem5/gem5_library_example_tests/test_gem5_library_examples.py
+++ b/tests/gem5/gem5_library_example_tests/test_gem5_library_examples.py
@@ -88,3 +88,25 @@
valid_hosts=constants.supported_hosts,
length=constants.long_tag,
)
+
+if os.access("/dev/kvm", mode=os.R_OK | os.W_OK):
+ # The x86-parsec-benchmarks uses KVM cores, this test will therefore only
+ # be run on systems that support KVM.
+ gem5_verify_config(
+ name="test-gem5-library-example-x86-parsec-benchmarks",
+ fixtures=(),
+ verifiers=(),
+ config=joinpath(
+ config.base_dir,
+ "configs",
+ "example",
+ "gem5_library",
+ "x86-parsec-benchmarks.py",
+ ),
+ config_args=["--benchmark","blackscholes", "--size","simsmall"],
+ valid_isas=(constants.x86_tag,),
+ protocol="MESI_Two_Level",
+ valid_hosts=constants.supported_hosts,
+ length=constants.long_tag,
+ )
+
