| /* |
| * Copyright (c) 2013-2014 ARM Limited |
| * All rights reserved |
| * |
| * The license below extends only to copyright in the software and shall |
| * not be construed as granting a license to any other intellectual |
| * property including but not limited to intellectual property relating |
| * to a hardware implementation of the functionality of the software |
| * licensed hereunder. You may use the software subject to the license |
| * terms below provided that you ensure that this notice is replicated |
| * unmodified and in its entirety in all distributions of the software, |
| * modified or unmodified, in source code or in binary form. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions are |
| * met: redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer; |
| * redistributions in binary form must reproduce the above copyright |
| * notice, this list of conditions and the following disclaimer in the |
| * documentation and/or other materials provided with the distribution; |
| * neither the name of the copyright holders nor the names of its |
| * contributors may be used to endorse or promote products derived from |
| * this software without specific prior written permission. |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS |
| * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT |
| * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR |
| * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT |
| * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, |
| * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT |
| * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, |
| * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY |
| * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
| * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE |
| * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| * |
| * Authors: Andrew Bardsley |
| */ |
| |
| /** |
| * @file |
| * |
| * Fetch1 is responsible for fetching "lines" from memory and passing |
| * them to Fetch2 |
| */ |
| |
| #ifndef __CPU_MINOR_FETCH1_HH__ |
| #define __CPU_MINOR_FETCH1_HH__ |
| |
| #include "cpu/minor/buffers.hh" |
| #include "cpu/minor/cpu.hh" |
| #include "cpu/minor/pipe_data.hh" |
| #include "cpu/base.hh" |
| #include "mem/packet.hh" |
| |
| namespace Minor |
| { |
| |
| /** A stage responsible for fetching "lines" from memory and passing |
| * them to Fetch2 */ |
| class Fetch1 : public Named |
| { |
| protected: |
| /** Exposable fetch port */ |
| class IcachePort : public MinorCPU::MinorCPUPort |
| { |
| protected: |
| /** My owner */ |
| Fetch1 &fetch; |
| |
| public: |
| IcachePort(std::string name, Fetch1 &fetch_, MinorCPU &cpu) : |
| MinorCPU::MinorCPUPort(name, cpu), fetch(fetch_) |
| { } |
| |
| protected: |
| bool recvTimingResp(PacketPtr pkt) |
| { return fetch.recvTimingResp(pkt); } |
| |
| void recvReqRetry() { fetch.recvReqRetry(); } |
| }; |
| |
| /** Memory access queuing. |
| * |
| * A request can be submitted by pushing it onto the requests queue after |
| * issuing an ITLB lookup (state becomes InTranslation) with a |
| * FetchSenderState senderState containing the current lineSeqNum and |
| * stream/predictionSeqNum. |
| * |
| * Translated packets (state becomes Translation) are then passed to the |
| * memory system and the transfers queue (state becomes RequestIssuing). |
| * Retries are handled by leaving the packet on the requests queue and |
| * changing the state to IcacheNeedsRetry). |
| * |
| * Responses from the memory system alter the request object (state |
| * become Complete). Responses can be picked up from the head of the |
| * transfers queue to pass on to Fetch2. */ |
| |
| /** Structure to hold SenderState info through |
| * translation and memory accesses. */ |
| class FetchRequest : |
| public BaseTLB::Translation, /* For TLB lookups */ |
| public Packet::SenderState /* For packing into a Packet */ |
| { |
| protected: |
| /** Owning fetch unit */ |
| Fetch1 &fetch; |
| |
| public: |
| /** Progress of this request through address translation and |
| * memory */ |
| enum FetchRequestState |
| { |
| NotIssued, /* Just been made */ |
| InTranslation, /* Issued to ITLB, must wait for reqply */ |
| Translated, /* Translation complete */ |
| RequestIssuing, /* Issued to memory, must wait for response */ |
| Complete /* Complete. Either a fault, or a fetched line */ |
| }; |
| |
| FetchRequestState state; |
| |
| /** Identity of the line that this request will generate */ |
| InstId id; |
| |
| /** FetchRequests carry packets while they're in the requests and |
| * transfers responses queues. When a Packet returns from the memory |
| * system, its request needs to have its packet updated as this may |
| * have changed in flight */ |
| PacketPtr packet; |
| |
| /** The underlying request that this fetch represents */ |
| RequestPtr request; |
| |
| /** PC to fixup with line address */ |
| TheISA::PCState pc; |
| |
| /** Fill in a fault if one happens during fetch, check this by |
| * picking apart the response packet */ |
| Fault fault; |
| |
| /** Make a packet to use with the memory transaction */ |
| void makePacket(); |
| |
| /** Report interface */ |
| void reportData(std::ostream &os) const; |
| |
| /** Is this line out of date with the current stream/prediction |
| * sequence and can it be discarded without orphaning in flight |
| * TLB lookups/memory accesses? */ |
| bool isDiscardable() const; |
| |
| /** Is this a complete read line or fault */ |
| bool isComplete() const { return state == Complete; } |
| |
| protected: |
| /** BaseTLB::Translation interface */ |
| |
| /** Interface for ITLB responses. We can handle delay, so don't |
| * do anything */ |
| void markDelayed() { } |
| |
| /** Interface for ITLB responses. Populates self and then passes |
| * the request on to the ports' handleTLBResponse member |
| * function */ |
| void finish(const Fault &fault_, const RequestPtr &request_, |
| ThreadContext *tc, BaseTLB::Mode mode); |
| |
| public: |
| FetchRequest(Fetch1 &fetch_, InstId id_, TheISA::PCState pc_) : |
| SenderState(), |
| fetch(fetch_), |
| state(NotIssued), |
| id(id_), |
| packet(NULL), |
| request(), |
| pc(pc_), |
| fault(NoFault) |
| { |
| request = std::make_shared<Request>(); |
| } |
| |
| ~FetchRequest(); |
| }; |
| |
| typedef FetchRequest *FetchRequestPtr; |
| |
| protected: |
| /** Construction-assigned data members */ |
| |
| /** Pointer back to the containing CPU */ |
| MinorCPU &cpu; |
| |
| /** Input port carrying branch requests from Execute */ |
| Latch<BranchData>::Output inp; |
| /** Output port carrying read lines to Fetch2 */ |
| Latch<ForwardLineData>::Input out; |
| /** Input port carrying branch predictions from Fetch2 */ |
| Latch<BranchData>::Output prediction; |
| |
| /** Interface to reserve space in the next stage */ |
| std::vector<InputBuffer<ForwardLineData>> &nextStageReserve; |
| |
| /** IcachePort to pass to the CPU. Fetch1 is the only module that uses |
| * it. */ |
| IcachePort icachePort; |
| |
| /** Line snap size in bytes. All fetches clip to make their ends not |
| * extend beyond this limit. Setting this to the machine L1 cache line |
| * length will result in fetches never crossing line boundaries. */ |
| unsigned int lineSnap; |
| |
| /** Maximum fetch width in bytes. Setting this (and lineSnap) to the |
| * machine L1 cache line length will result in fetches of whole cache |
| * lines. Setting this to sizeof(MachInst) will result it fetches of |
| * single instructions (except near the end of lineSnap lines) */ |
| unsigned int maxLineWidth; |
| |
| /** Maximum number of fetches allowed in flight (in queues or memory) */ |
| unsigned int fetchLimit; |
| |
| protected: |
| /** Cycle-by-cycle state */ |
| |
| /** State of memory access for head instruction fetch */ |
| enum FetchState |
| { |
| FetchHalted, /* Not fetching, waiting to be woken by transition |
| to FetchWaitingForPC. The PC is not valid in this state */ |
| FetchWaitingForPC, /* Not fetching, waiting for stream change. |
| This doesn't stop issued fetches from being returned and |
| processed or for branches to change the state to Running. */ |
| FetchRunning /* Try to fetch, when possible */ |
| }; |
| |
| /** Stage cycle-by-cycle state */ |
| |
| struct Fetch1ThreadInfo { |
| |
| /** Consturctor to initialize all fields. */ |
| Fetch1ThreadInfo() : |
| state(FetchWaitingForPC), |
| pc(TheISA::PCState(0)), |
| streamSeqNum(InstId::firstStreamSeqNum), |
| predictionSeqNum(InstId::firstPredictionSeqNum), |
| blocked(false), |
| wakeupGuard(false) |
| { } |
| |
| Fetch1ThreadInfo(const Fetch1ThreadInfo& other) : |
| state(other.state), |
| pc(other.pc), |
| streamSeqNum(other.streamSeqNum), |
| predictionSeqNum(other.predictionSeqNum), |
| blocked(other.blocked) |
| { } |
| |
| FetchState state; |
| |
| /** Fetch PC value. This is updated by branches from Execute, branch |
| * prediction targets from Fetch2 and by incrementing it as we fetch |
| * lines subsequent to those two sources. */ |
| TheISA::PCState pc; |
| |
| /** Stream sequence number. This changes on request from Execute and is |
| * used to tag instructions by the fetch stream to which they belong. |
| * Execute originates new prediction sequence numbers. */ |
| InstSeqNum streamSeqNum; |
| |
| /** Prediction sequence number. This changes when requests from Execute |
| * or Fetch2 ask for a change of fetch address and is used to tag lines |
| * by the prediction to which they belong. Fetch2 originates |
| * prediction sequence numbers. */ |
| InstSeqNum predictionSeqNum; |
| |
| /** Blocked indication for report */ |
| bool blocked; |
| |
| /** Signal to guard against sleeping first cycle of wakeup */ |
| bool wakeupGuard; |
| }; |
| |
| std::vector<Fetch1ThreadInfo> fetchInfo; |
| ThreadID threadPriority; |
| |
| /** State of memory access for head instruction fetch */ |
| enum IcacheState |
| { |
| IcacheRunning, /* Default. Step icache queues when possible */ |
| IcacheNeedsRetry /* Request rejected, will be asked to retry */ |
| }; |
| |
| typedef Queue<FetchRequestPtr, |
| ReportTraitsPtrAdaptor<FetchRequestPtr>, |
| NoBubbleTraits<FetchRequestPtr> > |
| FetchQueue; |
| |
| /** Queue of address translated requests from Fetch1 */ |
| FetchQueue requests; |
| |
| /** Queue of in-memory system requests and responses */ |
| FetchQueue transfers; |
| |
| /** Retry state of icache_port */ |
| IcacheState icacheState; |
| |
| /** Sequence number for line fetch used for ordering lines to flush */ |
| InstSeqNum lineSeqNum; |
| |
| /** Count of the number fetches which have left the transfers queue |
| * and are in the 'wild' in the memory system. Try not to rely on |
| * this value, it's better to code without knowledge of the number |
| * of outstanding accesses */ |
| unsigned int numFetchesInMemorySystem; |
| /** Number of requests inside the ITLB rather than in the queues. |
| * All requests so located *must* have reserved space in the |
| * transfers queue */ |
| unsigned int numFetchesInITLB; |
| |
| protected: |
| friend std::ostream &operator <<(std::ostream &os, |
| Fetch1::FetchState state); |
| |
| /** Start fetching from a new address. */ |
| void changeStream(const BranchData &branch); |
| |
| /** Update streamSeqNum and predictionSeqNum from the given branch (and |
| * assume these have changed and discard (on delivery) all lines in |
| * flight) */ |
| void updateExpectedSeqNums(const BranchData &branch); |
| |
| /** Convert a response to a ForwardLineData */ |
| void processResponse(FetchRequestPtr response, |
| ForwardLineData &line); |
| |
| friend std::ostream &operator <<(std::ostream &os, |
| IcacheState state); |
| |
| |
| /** Use the current threading policy to determine the next thread to |
| * fetch from. */ |
| ThreadID getScheduledThread(); |
| |
| /** Insert a line fetch into the requests. This can be a partial |
| * line request where the given address has a non-0 offset into a |
| * line. */ |
| void fetchLine(ThreadID tid); |
| |
| /** Try and issue a fetch for a translated request at the |
| * head of the requests queue. Also tries to move the request |
| * between queues */ |
| void tryToSendToTransfers(FetchRequestPtr request); |
| |
| /** Try to send (or resend) a memory request's next/only packet to |
| * the memory system. Returns true if the fetch was successfully |
| * sent to memory */ |
| bool tryToSend(FetchRequestPtr request); |
| |
| /** Move a request between queues */ |
| void moveFromRequestsToTransfers(FetchRequestPtr request); |
| |
| /** Step requests along between requests and transfers queues */ |
| void stepQueues(); |
| |
| /** Pop a request from the given queue and correctly deallocate and |
| * discard it. */ |
| void popAndDiscard(FetchQueue &queue); |
| |
| /** Handle pushing a TLB response onto the right queue */ |
| void handleTLBResponse(FetchRequestPtr response); |
| |
| /** Returns the total number of queue occupancy, in-ITLB and |
| * in-memory system fetches */ |
| unsigned int numInFlightFetches(); |
| |
| /** Print the appropriate MinorLine line for a fetch response */ |
| void minorTraceResponseLine(const std::string &name, |
| FetchRequestPtr response) const; |
| |
| /** Memory interface */ |
| virtual bool recvTimingResp(PacketPtr pkt); |
| virtual void recvReqRetry(); |
| |
| public: |
| Fetch1(const std::string &name_, |
| MinorCPU &cpu_, |
| MinorCPUParams ¶ms, |
| Latch<BranchData>::Output inp_, |
| Latch<ForwardLineData>::Input out_, |
| Latch<BranchData>::Output prediction_, |
| std::vector<InputBuffer<ForwardLineData>> &next_stage_input_buffer); |
| |
| public: |
| /** Returns the IcachePort owned by this Fetch1 */ |
| MinorCPU::MinorCPUPort &getIcachePort() { return icachePort; } |
| |
| /** Pass on input/buffer data to the output if you can */ |
| void evaluate(); |
| |
| /** Initiate fetch1 fetching */ |
| void wakeupFetch(ThreadID tid); |
| |
| void minorTrace() const; |
| |
| /** Is this stage drained? For Fetch1, draining is initiated by |
| * Execute signalling a branch with the reason HaltFetch */ |
| bool isDrained(); |
| }; |
| |
| } |
| |
| #endif /* __CPU_MINOR_FETCH1_HH__ */ |