| /* |
| * Copyright (c) 2019 ARM Limited |
| * All rights reserved |
| * |
| * The license below extends only to copyright in the software and shall |
| * not be construed as granting a license to any other intellectual |
| * property including but not limited to intellectual property relating |
| * to a hardware implementation of the functionality of the software |
| * licensed hereunder. You may use the software subject to the license |
| * terms below provided that you ensure that this notice is replicated |
| * unmodified and in its entirety in all distributions of the software, |
| * modified or unmodified, in source code or in binary form. |
| * |
| * Copyright (c) 2018 Metempsy Technology Consulting |
| * All rights reserved. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions are |
| * met: redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer; |
| * redistributions in binary form must reproduce the above copyright |
| * notice, this list of conditions and the following disclaimer in the |
| * documentation and/or other materials provided with the distribution; |
| * neither the name of the copyright holders nor the names of its |
| * contributors may be used to endorse or promote products derived from |
| * this software without specific prior written permission. |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS |
| * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT |
| * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR |
| * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT |
| * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, |
| * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT |
| * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, |
| * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY |
| * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
| * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE |
| * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| * |
| * Authors: Jairo Balart |
| */ |
| |
| #include "dev/arm/gic_v3_distributor.hh" |
| |
| #include <algorithm> |
| |
| #include "base/intmath.hh" |
| #include "debug/GIC.hh" |
| #include "dev/arm/gic_v3.hh" |
| #include "dev/arm/gic_v3_cpu_interface.hh" |
| #include "dev/arm/gic_v3_redistributor.hh" |
| |
| const AddrRange Gicv3Distributor::GICD_IGROUPR (0x0080, 0x00ff); |
| const AddrRange Gicv3Distributor::GICD_ISENABLER (0x0100, 0x017f); |
| const AddrRange Gicv3Distributor::GICD_ICENABLER (0x0180, 0x01ff); |
| const AddrRange Gicv3Distributor::GICD_ISPENDR (0x0200, 0x027f); |
| const AddrRange Gicv3Distributor::GICD_ICPENDR (0x0280, 0x02ff); |
| const AddrRange Gicv3Distributor::GICD_ISACTIVER (0x0300, 0x037f); |
| const AddrRange Gicv3Distributor::GICD_ICACTIVER (0x0380, 0x03ff); |
| const AddrRange Gicv3Distributor::GICD_IPRIORITYR(0x0400, 0x07ff); |
| const AddrRange Gicv3Distributor::GICD_ITARGETSR (0x0800, 0x08ff); |
| const AddrRange Gicv3Distributor::GICD_ICFGR (0x0c00, 0x0cff); |
| const AddrRange Gicv3Distributor::GICD_IGRPMODR (0x0d00, 0x0d7f); |
| const AddrRange Gicv3Distributor::GICD_NSACR (0x0e00, 0x0eff); |
| const AddrRange Gicv3Distributor::GICD_CPENDSGIR (0x0f10, 0x0f1f); |
| const AddrRange Gicv3Distributor::GICD_SPENDSGIR (0x0f20, 0x0f2f); |
| const AddrRange Gicv3Distributor::GICD_IROUTER (0x6000, 0x7fe0); |
| |
| Gicv3Distributor::Gicv3Distributor(Gicv3 * gic, uint32_t it_lines) |
| : gic(gic), |
| itLines(it_lines), |
| ARE(true), |
| EnableGrp1S(0), |
| EnableGrp1NS(0), |
| EnableGrp0(0), |
| irqGroup(it_lines, 0), |
| irqEnabled(it_lines, false), |
| irqPending(it_lines, false), |
| irqActive(it_lines, false), |
| irqPriority(it_lines, 0xAA), |
| irqConfig(it_lines, Gicv3::INT_LEVEL_SENSITIVE), |
| irqGrpmod(it_lines, 0), |
| irqNsacr(it_lines, 0), |
| irqAffinityRouting(it_lines, 0), |
| gicdTyper(0), |
| gicdPidr0(0x92), |
| gicdPidr1(0xb4), |
| gicdPidr2(0x3b), |
| gicdPidr3(0), |
| gicdPidr4(0x44) |
| { |
| panic_if(it_lines > Gicv3::INTID_SECURE, "Invalid value for it_lines!"); |
| /* |
| * RSS [26] == 1 |
| * (The implementation does supports targeted SGIs with affinity |
| * level 0 values of 0 - 255) |
| * No1N [25] == 1 |
| * (1 of N SPI interrupts are not supported) |
| * A3V [24] == 1 |
| * (Supports nonzero values of Affinity level 3) |
| * IDbits [23:19] == 0xf |
| * (The number of interrupt identifier bits supported, minus one) |
| * DVIS [18] == 0 |
| * (The implementation does not support Direct Virtual LPI |
| * injection) |
| * LPIS [17] == 1 |
| * (The implementation does not support LPIs) |
| * MBIS [16] == 1 |
| * (The implementation supports message-based interrupts |
| * by writing to Distributor registers) |
| * SecurityExtn [10] == X |
| * (The GIC implementation supports two Security states) |
| * CPUNumber [7:5] == 0 |
| * (since for us ARE is always 1 [(ARE = 0) == Gicv2 legacy]) |
| * ITLinesNumber [4:0] == N |
| * (MaxSPIIntId = 32 (N + 1) - 1) |
| */ |
| int max_spi_int_id = itLines - 1; |
| int it_lines_number = divCeil(max_spi_int_id + 1, 32) - 1; |
| gicdTyper = (1 << 26) | (1 << 25) | (1 << 24) | (IDBITS << 19) | |
| (1 << 17) | (1 << 16) | |
| ((gic->getSystem()->haveSecurity() ? 1 : 0) << 10) | |
| (it_lines_number << 0); |
| |
| if (gic->getSystem()->haveSecurity()) { |
| DS = false; |
| } else { |
| DS = true; |
| } |
| } |
| |
| void |
| Gicv3Distributor::init() |
| { |
| } |
| |
| uint64_t |
| Gicv3Distributor::read(Addr addr, size_t size, bool is_secure_access) |
| { |
| if (GICD_IGROUPR.contains(addr)) { // Interrupt Group Registers |
| uint64_t val = 0x0; |
| |
| if (!DS && !is_secure_access) { |
| // RAZ/WI for non-secure accesses |
| return 0; |
| } |
| |
| int first_intid = (addr - GICD_IGROUPR.start()) * 8; |
| |
| if (isNotSPI(first_intid)) { |
| return 0; |
| } |
| |
| for (int i = 0, int_id = first_intid; i < 8 * size && int_id < itLines; |
| i++, int_id++) { |
| val |= irqGroup[int_id] << i; |
| } |
| |
| return val; |
| } else if (GICD_ISENABLER.contains(addr)) { |
| // Interrupt Set-Enable Registers |
| uint64_t val = 0x0; |
| int first_intid = (addr - GICD_ISENABLER.start()) * 8; |
| |
| if (isNotSPI(first_intid)) { |
| return 0; |
| } |
| |
| for (int i = 0, int_id = first_intid; i < 8 * size && int_id < itLines; |
| i++, int_id++) { |
| |
| if (nsAccessToSecInt(int_id, is_secure_access)) |
| { |
| continue; |
| } |
| |
| val |= irqEnabled[int_id] << i; |
| } |
| |
| return val; |
| } else if (GICD_ICENABLER.contains(addr)) { |
| // Interrupt Clear-Enable Registers |
| uint64_t val = 0x0; |
| int first_intid = (addr - GICD_ICENABLER.start()) * 8; |
| |
| if (isNotSPI(first_intid)) { |
| return 0; |
| } |
| |
| for (int i = 0, int_id = first_intid; i < 8 * size && int_id < itLines; |
| i++, int_id++) { |
| |
| if (nsAccessToSecInt(int_id, is_secure_access)) |
| { |
| continue; |
| } |
| |
| val |= (irqEnabled[int_id] << i); |
| } |
| |
| return val; |
| } else if (GICD_ISPENDR.contains(addr)) { |
| // Interrupt Set-Pending Registers |
| uint64_t val = 0x0; |
| int first_intid = (addr - GICD_ISPENDR.start()) * 8; |
| |
| if (isNotSPI(first_intid)) { |
| return 0; |
| } |
| |
| for (int i = 0, int_id = first_intid; i < 8 * size && int_id < itLines; |
| i++, int_id++) { |
| |
| if (nsAccessToSecInt(int_id, is_secure_access)) |
| { |
| if (irqNsacr[int_id] == 0) { |
| // Group 0 or Secure Group 1 interrupts are RAZ/WI |
| continue; |
| } |
| } |
| |
| val |= (irqPending[int_id] << i); |
| } |
| |
| return val; |
| } else if (GICD_ICPENDR.contains(addr)) { |
| // Interrupt Clear-Pending Registers |
| uint64_t val = 0x0; |
| int first_intid = (addr - GICD_ICPENDR.start()) * 8; |
| |
| if (isNotSPI(first_intid)) { |
| return 0; |
| } |
| |
| for (int i = 0, int_id = first_intid; i < 8 * size && int_id < itLines; |
| i++, int_id++) { |
| |
| if (nsAccessToSecInt(int_id, is_secure_access)) |
| { |
| if (irqNsacr[int_id] < 2) { |
| // Group 0 or Secure Group 1 interrupts are RAZ/WI |
| continue; |
| } |
| } |
| |
| val |= (irqPending[int_id] << i); |
| } |
| |
| return val; |
| } else if (GICD_ISACTIVER.contains(addr)) { |
| // Interrupt Set-Active Registers |
| int first_intid = (addr - GICD_ISACTIVER.start()) * 8; |
| |
| if (isNotSPI(first_intid)) { |
| return 0; |
| } |
| |
| uint64_t val = 0x0; |
| |
| for (int i = 0, int_id = first_intid; i < 8 * size && int_id < itLines; |
| i++, int_id++) { |
| |
| if (nsAccessToSecInt(int_id, is_secure_access)) |
| { |
| // Group 0 or Secure Group 1 interrupts are RAZ/WI |
| if (irqNsacr[int_id] < 2) { |
| continue; |
| } |
| } |
| |
| val |= (irqActive[int_id] << i); |
| } |
| |
| return val; |
| } else if (GICD_ICACTIVER.contains(addr)) { |
| // Interrupt Clear-Active Registers |
| int first_intid = (addr - GICD_ICACTIVER.start()) * 8; |
| |
| if (isNotSPI(first_intid)) { |
| return 0; |
| } |
| |
| uint64_t val = 0x0; |
| |
| for (int i = 0, int_id = first_intid; i < 8 * size && int_id < itLines; |
| i++, int_id++) { |
| |
| if (nsAccessToSecInt(int_id, is_secure_access)) |
| { |
| if (irqNsacr[int_id] < 2) { |
| continue; |
| } |
| } |
| |
| val |= (irqActive[int_id] << i); |
| } |
| |
| return val; |
| } else if (GICD_IPRIORITYR.contains(addr)) { |
| // Interrupt Priority Registers |
| uint64_t val = 0x0; |
| int first_intid = addr - GICD_IPRIORITYR.start(); |
| |
| if (isNotSPI(first_intid)) { |
| return 0; |
| } |
| |
| for (int i = 0, int_id = first_intid; i < size && int_id < itLines; |
| i++, int_id++) { |
| |
| uint8_t prio = irqPriority[int_id]; |
| |
| if (!DS && !is_secure_access) { |
| if (getIntGroup(int_id) != Gicv3::G1NS) { |
| // RAZ/WI for non-secure accesses for secure interrupts |
| continue; |
| } else { |
| // NS view |
| prio = (prio << 1) & 0xff; |
| } |
| } |
| |
| val |= prio << (i * 8); |
| } |
| |
| return val; |
| } else if (GICD_ITARGETSR.contains(addr)) { |
| // Interrupt Processor Targets Registers |
| // ARE always on, RAZ/WI |
| warn("Gicv3Distributor::read(): " |
| "GICD_ITARGETSR is RAZ/WI, legacy not supported!\n"); |
| return 0; |
| } else if (GICD_ICFGR.contains(addr)) { |
| // Interrupt Configuration Registers |
| int first_intid = (addr - GICD_ICFGR.start()) * 4; |
| |
| if (isNotSPI(first_intid)) { |
| return 0; |
| } |
| |
| uint64_t val = 0x0; |
| |
| for (int i = 0, int_id = first_intid; i < 8 * size && int_id < itLines; |
| i = i + 2, int_id++) { |
| |
| if (nsAccessToSecInt(int_id, is_secure_access)) |
| { |
| continue; |
| } |
| |
| if (irqConfig[int_id] == Gicv3::INT_EDGE_TRIGGERED) { |
| val |= (0x2 << i); |
| } |
| } |
| |
| return val; |
| } else if (GICD_IGRPMODR.contains(addr)) { |
| // Interrupt Group Modifier Registers |
| if (DS) { |
| // RAZ/WI if security disabled |
| return 0; |
| } else { |
| if (!is_secure_access) { |
| // RAZ/WI for non-secure accesses |
| return 0; |
| } else { |
| int first_intid = (addr - GICD_IGRPMODR.start()) * 8; |
| |
| if (isNotSPI(first_intid)) { |
| return 0; |
| } |
| |
| uint64_t val = 0x0; |
| |
| for (int i = 0, int_id = first_intid; |
| i < 8 * size && int_id < itLines; i++, int_id++) { |
| val |= irqGrpmod[int_id] << i; |
| } |
| |
| return val; |
| } |
| } |
| } else if (GICD_NSACR.contains(addr)) { |
| // Non-secure Access Control Registers |
| // 2 bits per interrupt |
| int first_intid = (addr - GICD_NSACR.start()) * 4; |
| |
| if (isNotSPI(first_intid)) { |
| return 0; |
| } |
| |
| if (DS || (!DS && !is_secure_access)) { |
| return 0; |
| } |
| |
| uint64_t val = 0x0; |
| |
| for (int i = 0, int_id = first_intid; |
| i < 8 * size && int_id < itLines; i = i + 2, int_id++) { |
| val |= irqNsacr[int_id] << i; |
| } |
| |
| return val; |
| } else if (GICD_CPENDSGIR.contains(addr)) { // SGI Clear-Pending Registers |
| // ARE always on, RAZ/WI |
| warn("Gicv3Distributor::read(): " |
| "GICD_CPENDSGIR is RAZ/WI, legacy not supported!\n"); |
| return 0x0; |
| } else if (GICD_SPENDSGIR.contains(addr)) { // SGI Set-Pending Registers |
| // ARE always on, RAZ/WI |
| warn("Gicv3Distributor::read(): " |
| "GICD_SPENDSGIR is RAZ/WI, legacy not supported!\n"); |
| return 0x0; |
| } else if (GICD_IROUTER.contains(addr)) { // Interrupt Routing Registers |
| // 64 bit registers. 2 or 1 access. |
| int int_id = (addr - GICD_IROUTER.start()) / 8; |
| |
| if (isNotSPI(int_id)) { |
| return 0; |
| } |
| |
| if (nsAccessToSecInt(int_id, is_secure_access)) |
| { |
| if (irqNsacr[int_id] < 3) { |
| return 0; |
| } |
| } |
| |
| if (size == 4) { |
| if (addr & 7) { // high half of 64 bit register |
| return irqAffinityRouting[int_id] >> 32; |
| } else { // high low of 64 bit register |
| return irqAffinityRouting[int_id] & 0xFFFFFFFF; |
| } |
| } else { |
| return irqAffinityRouting[int_id]; |
| } |
| } |
| |
| switch (addr) { |
| case GICD_CTLR: // Control Register |
| if (!DS) { |
| if (is_secure_access) { |
| // E1NWF [7] RAZ/WI |
| // DS [6] - Disable Security |
| // ARE_NS [5] RAO/WI |
| // ARE_S [4] RAO/WI |
| // EnableGrp1S [2] |
| // EnableGrp1NS [1] |
| // EnableGrp0 [0] |
| return (EnableGrp0 << 0) | |
| (EnableGrp1NS << 1) | |
| (EnableGrp1S << 2) | |
| (1 << 4) | |
| (1 << 5) | |
| (DS << 6); |
| } else { |
| // ARE_NS [4] RAO/WI; |
| // EnableGrp1A [1] is a read-write alias of the Secure |
| // GICD_CTLR.EnableGrp1NS |
| // EnableGrp1 [0] RES0 |
| return (1 << 4) | (EnableGrp1NS << 1); |
| } |
| } else { |
| return (DS << 6) | (ARE << 4) | |
| (EnableGrp1NS << 1) | (EnableGrp0 << 0); |
| } |
| |
| case GICD_TYPER: // Interrupt Controller Type Register |
| return gicdTyper; |
| |
| case GICD_IIDR: // Implementer Identification Register |
| //return 0x43b; // ARM JEP106 code (r0p0 GIC-500) |
| return 0; |
| |
| case GICD_STATUSR: // Error Reporting Status Register |
| // Optional register, RAZ/WI |
| return 0x0; |
| |
| case GICD_PIDR0: // Peripheral ID0 Register |
| return gicdPidr0; |
| |
| case GICD_PIDR1: // Peripheral ID1 Register |
| return gicdPidr1; |
| |
| case GICD_PIDR2: // Peripheral ID2 Register |
| return gicdPidr2; |
| |
| case GICD_PIDR3: // Peripheral ID3 Register |
| return gicdPidr3; |
| |
| case GICD_PIDR4: // Peripheral ID4 Register |
| return gicdPidr4; |
| |
| case GICD_PIDR5: // Peripheral ID5 Register |
| case GICD_PIDR6: // Peripheral ID6 Register |
| case GICD_PIDR7: // Peripheral ID7 Register |
| return 0; // RES0 |
| |
| default: |
| panic("Gicv3Distributor::read(): invalid offset %#x\n", addr); |
| break; |
| } |
| } |
| |
| void |
| Gicv3Distributor::write(Addr addr, uint64_t data, size_t size, |
| bool is_secure_access) |
| { |
| if (GICD_IGROUPR.contains(addr)) { // Interrupt Group Registers |
| if (!DS && !is_secure_access) { |
| // RAZ/WI for non-secure accesses |
| return; |
| } |
| |
| int first_intid = (addr - GICD_IGROUPR.start()) * 8; |
| |
| if (isNotSPI(first_intid)) { |
| return; |
| } |
| |
| for (int i = 0, int_id = first_intid; i < 8 * size && int_id < itLines; |
| i++, int_id++) { |
| irqGroup[int_id] = data & (1 << i) ? 1 : 0; |
| DPRINTF(GIC, "Gicv3Distributor::write(): int_id %d group %d\n", |
| int_id, irqGroup[int_id]); |
| } |
| |
| return; |
| } else if (GICD_ISENABLER.contains(addr)) { |
| // Interrupt Set-Enable Registers |
| int first_intid = (addr - GICD_ISENABLER.start()) * 8; |
| |
| if (isNotSPI(first_intid)) { |
| return; |
| } |
| |
| for (int i = 0, int_id = first_intid; i < 8 * size && int_id < itLines; |
| i++, int_id++) { |
| |
| if (nsAccessToSecInt(int_id, is_secure_access)) |
| { |
| continue; |
| } |
| |
| bool enable = data & (1 << i) ? 1 : 0; |
| |
| if (enable) { |
| if (!irqEnabled[int_id]) { |
| DPRINTF(GIC, "Gicv3Distributor::write(): " |
| "int_id %d enabled\n", int_id); |
| } |
| |
| irqEnabled[int_id] = true; |
| } |
| } |
| |
| return; |
| } else if (GICD_ICENABLER.contains(addr)) { |
| // Interrupt Clear-Enable Registers |
| int first_intid = (addr - GICD_ICENABLER.start()) * 8; |
| |
| if (isNotSPI(first_intid)) { |
| return; |
| } |
| |
| for (int i = 0, int_id = first_intid; i < 8 * size && int_id < itLines; |
| i++, int_id++) { |
| |
| if (nsAccessToSecInt(int_id, is_secure_access)) |
| { |
| continue; |
| } |
| |
| bool disable = data & (1 << i) ? 1 : 0; |
| |
| if (disable) { |
| if (irqEnabled[int_id]) { |
| DPRINTF(GIC, "Gicv3Distributor::write(): " |
| "int_id %d disabled\n", int_id); |
| } |
| |
| irqEnabled[int_id] = false; |
| } |
| } |
| |
| return; |
| } else if (GICD_ISPENDR.contains(addr)) { |
| // Interrupt Set-Pending Registers |
| int first_intid = (addr - GICD_ISPENDR.start()) * 8; |
| |
| if (isNotSPI(first_intid)) { |
| return; |
| } |
| |
| for (int i = 0, int_id = first_intid; i < 8 * size && int_id < itLines; |
| i++, int_id++) { |
| |
| if (nsAccessToSecInt(int_id, is_secure_access)) |
| { |
| if (irqNsacr[int_id] == 0) { |
| // Group 0 or Secure Group 1 interrupts are RAZ/WI |
| continue; |
| } |
| } |
| |
| bool pending = data & (1 << i) ? 1 : 0; |
| |
| if (pending) { |
| DPRINTF(GIC, "Gicv3Distributor::write() (GICD_ISPENDR): " |
| "int_id %d (SPI) pending bit set\n", int_id); |
| irqPending[int_id] = true; |
| } |
| } |
| |
| update(); |
| return; |
| } else if (GICD_ICPENDR.contains(addr)) { |
| // Interrupt Clear-Pending Registers |
| int first_intid = (addr - GICD_ICPENDR.start()) * 8; |
| |
| if (isNotSPI(first_intid)) { |
| return; |
| } |
| |
| for (int i = 0, int_id = first_intid; i < 8 * size && int_id < itLines; |
| i++, int_id++) { |
| |
| if (nsAccessToSecInt(int_id, is_secure_access)) |
| { |
| if (irqNsacr[int_id] < 2) { |
| // Group 0 or Secure Group 1 interrupts are RAZ/WI |
| continue; |
| } |
| } |
| |
| bool clear = data & (1 << i) ? 1 : 0; |
| |
| if (clear) { |
| irqPending[int_id] = false; |
| clearIrqCpuInterface(int_id); |
| } |
| } |
| |
| update(); |
| return; |
| } else if (GICD_ISACTIVER.contains(addr)) { |
| // Interrupt Set-Active Registers |
| int first_intid = (addr - GICD_ISACTIVER.start()) * 8; |
| |
| if (isNotSPI(first_intid)) { |
| return; |
| } |
| |
| for (int i = 0, int_id = first_intid; i < 8 * size && int_id < itLines; |
| i++, int_id++) { |
| |
| if (nsAccessToSecInt(int_id, is_secure_access)) |
| { |
| continue; |
| } |
| |
| bool active = data & (1 << i) ? 1 : 0; |
| |
| if (active) { |
| irqActive[int_id] = 1; |
| } |
| } |
| |
| return; |
| } else if (GICD_ICACTIVER.contains(addr)) { |
| // Interrupt Clear-Active Registers |
| int first_intid = (addr - GICD_ICACTIVER.start()) * 8; |
| |
| if (isNotSPI(first_intid)) { |
| return; |
| } |
| |
| for (int i = 0, int_id = first_intid; i < 8 * size && int_id < itLines; |
| i++, int_id++) { |
| |
| if (nsAccessToSecInt(int_id, is_secure_access)) |
| { |
| continue; |
| } |
| |
| bool clear = data & (1 << i) ? 1 : 0; |
| |
| if (clear) { |
| if (irqActive[int_id]) { |
| DPRINTF(GIC, "Gicv3Distributor::write(): " |
| "int_id %d active cleared\n", int_id); |
| } |
| |
| irqActive[int_id] = false; |
| } |
| } |
| |
| return; |
| } else if (GICD_IPRIORITYR.contains(addr)) { |
| // Interrupt Priority Registers |
| int first_intid = addr - GICD_IPRIORITYR.start(); |
| |
| if (isNotSPI(first_intid)) { |
| return; |
| } |
| |
| for (int i = 0, int_id = first_intid; i < size && int_id < itLines; |
| i++, int_id++) { |
| uint8_t prio = bits(data, (i + 1) * 8 - 1, (i * 8)); |
| |
| if (!DS && !is_secure_access) { |
| if (getIntGroup(int_id) != Gicv3::G1NS) { |
| // RAZ/WI for non-secure accesses to secure interrupts |
| continue; |
| } else { |
| prio = 0x80 | (prio >> 1); |
| } |
| } |
| |
| irqPriority[int_id] = prio; |
| DPRINTF(GIC, "Gicv3Distributor::write(): int_id %d priority %d\n", |
| int_id, irqPriority[int_id]); |
| } |
| |
| return; |
| } else if (GICD_ITARGETSR.contains(addr)) { |
| // Interrupt Processor Targets Registers |
| // ARE always on, RAZ/WI |
| warn("Gicv3Distributor::write(): " |
| "GICD_ITARGETSR is RAZ/WI, legacy not supported!\n"); |
| return; |
| } else if (GICD_ICFGR.contains(addr)) { |
| // Interrupt Configuration Registers |
| // for x = 0 to 15: |
| // GICD_ICFGR[2x] = RES0 |
| // GICD_ICFGR[2x + 1] = |
| // 0 level-sensitive |
| // 1 edge-triggered |
| int first_intid = (addr - GICD_ICFGR.start()) * 4; |
| |
| if (isNotSPI(first_intid)) { |
| return; |
| } |
| |
| for (int i = 0, int_id = first_intid; i < 8 * size && int_id < itLines; |
| i = i + 2, int_id++) { |
| irqConfig[int_id] = data & (0x2 << i) ? |
| Gicv3::INT_EDGE_TRIGGERED : |
| Gicv3::INT_LEVEL_SENSITIVE; |
| DPRINTF(GIC, "Gicv3Distributor::write(): int_id %d config %d\n", |
| int_id, irqConfig[int_id]); |
| } |
| |
| return; |
| } else if (GICD_IGRPMODR.contains(addr)) { |
| // Interrupt Group Modifier Registers |
| if (DS) { |
| return; |
| } else { |
| if (!is_secure_access) { |
| // RAZ/WI for non-secure accesses |
| return; |
| } else { |
| int first_intid = (addr - GICD_IGRPMODR.start()) * 8; |
| |
| if (isNotSPI(first_intid)) { |
| return; |
| } |
| |
| for (int i = 0, int_id = first_intid; |
| i < 8 * size && int_id < itLines; i++, int_id++) { |
| irqGrpmod[int_id] = bits(data, i); |
| } |
| |
| return ; |
| } |
| } |
| |
| } else if (GICD_NSACR.contains(addr)) { |
| // Non-secure Access Control Registers |
| // 2 bits per interrupt |
| int first_intid = (addr - GICD_NSACR.start()) * 4; |
| |
| if (isNotSPI(first_intid)) { |
| return; |
| } |
| |
| if (DS || (!DS && !is_secure_access)) { |
| return; |
| } |
| |
| for (int i = 0, int_id = first_intid; |
| i < 8 * size && int_id < itLines; i = i + 2, int_id++) { |
| irqNsacr[int_id] = (data >> (2 * int_id)) & 0x3; |
| } |
| |
| return; |
| } else if (GICD_IROUTER.contains(addr)) { // Interrupt Routing Registers |
| // 64 bit registers. 2 accesses. |
| int int_id = (addr - GICD_IROUTER.start()) / 8; |
| |
| if (isNotSPI(int_id)) { |
| return; |
| } |
| |
| if (nsAccessToSecInt(int_id, is_secure_access)) |
| { |
| if (irqNsacr[int_id] < 3) { |
| // Group 0 or Secure Group 1 interrupts are RAZ/WI |
| return; |
| } |
| } |
| |
| if (size == 4) { |
| if (addr & 7) { // high half of 64 bit register |
| irqAffinityRouting[int_id] = |
| (irqAffinityRouting[int_id] & 0xffffffff) | (data << 32); |
| } else { // low half of 64 bit register |
| irqAffinityRouting[int_id] = |
| (irqAffinityRouting[int_id] & 0xffffffff00000000) | |
| (data & 0xffffffff); |
| } |
| } else { |
| irqAffinityRouting[int_id] = data; |
| } |
| |
| DPRINTF(GIC, "Gicv3Distributor::write(): " |
| "int_id %d GICD_IROUTER %#llx\n", |
| int_id, irqAffinityRouting[int_id]); |
| return; |
| } |
| |
| switch (addr) { |
| case GICD_CTLR: // Control Register |
| if (DS) { |
| /* |
| * E1NWF [7] |
| * 1 of N wakeup functionality not supported, RAZ/WI |
| * DS [6] - RAO/WI |
| * ARE [4] |
| * affinity routing always on, no GICv2 legacy, RAO/WI |
| * EnableGrp1 [1] |
| * EnableGrp0 [0] |
| */ |
| if ((data & (1 << 4)) == 0) { |
| warn("Gicv3Distributor::write(): " |
| "setting ARE to 0 is not supported!\n"); |
| } |
| |
| EnableGrp1NS = data & GICD_CTLR_ENABLEGRP1NS; |
| EnableGrp0 = data & GICD_CTLR_ENABLEGRP0; |
| DPRINTF(GIC, "Gicv3Distributor::write(): (DS 1)" |
| "EnableGrp1NS %d EnableGrp0 %d\n", |
| EnableGrp1NS, EnableGrp0); |
| } else { |
| if (is_secure_access) { |
| /* |
| * E1NWF [7] |
| * 1 of N wakeup functionality not supported, RAZ/WI |
| * DS [6] |
| * ARE_NS [5] |
| * affinity routing always on, no GICv2 legacy, RAO/WI |
| * ARE_S [4] |
| * affinity routing always on, no GICv2 legacy, RAO/WI |
| * EnableGrp1S [2] |
| * EnableGrp1NS [1] |
| * EnableGrp0 [0] |
| */ |
| if ((data & (1 << 5)) == 0) { |
| warn("Gicv3Distributor::write(): " |
| "setting ARE_NS to 0 is not supported!\n"); |
| } |
| |
| if ((data & (1 << 4)) == 0) { |
| warn("Gicv3Distributor::write(): " |
| "setting ARE_S to 0 is not supported!\n"); |
| } |
| |
| DS = data & GICD_CTLR_DS; |
| EnableGrp1S = data & GICD_CTLR_ENABLEGRP1S; |
| EnableGrp1NS = data & GICD_CTLR_ENABLEGRP1NS; |
| EnableGrp0 = data & GICD_CTLR_ENABLEGRP0; |
| DPRINTF(GIC, "Gicv3Distributor::write(): (DS 0 secure)" |
| "DS %d " |
| "EnableGrp1S %d EnableGrp1NS %d EnableGrp0 %d\n", |
| DS, EnableGrp1S, EnableGrp1NS, EnableGrp0); |
| |
| if (data & GICD_CTLR_DS) { |
| EnableGrp1S = 0; |
| } |
| } else { |
| /* |
| * ARE_NS [4] RAO/WI; |
| * EnableGrp1A [1] is a read-write alias of the Secure |
| * GICD_CTLR.EnableGrp1NS |
| * EnableGrp1 [0] RES0 |
| */ |
| if ((data & (1 << 4)) == 0) { |
| warn("Gicv3Distributor::write(): " |
| "setting ARE_NS to 0 is not supported!\n"); |
| } |
| |
| EnableGrp1NS = data & GICD_CTLR_ENABLEGRP1A; |
| DPRINTF(GIC, "Gicv3Distributor::write(): (DS 0 non-secure)" |
| "EnableGrp1NS %d\n", EnableGrp1NS); |
| } |
| } |
| |
| update(); |
| |
| break; |
| |
| case GICD_SGIR: // Error Reporting Status Register |
| // Only if affinity routing is disabled, RES0 |
| break; |
| |
| case GICD_SETSPI_NSR: { |
| // Writes to this register have no effect if: |
| // * The value written specifies an invalid SPI. |
| // * The SPI is already pending. |
| // * The value written specifies a Secure SPI, the value is |
| // written by a Non-secure access, and the value of the |
| // corresponding GICD_NSACR<n> register is 0. |
| const uint32_t intid = bits(data, 9, 0); |
| if (isNotSPI(intid) || irqPending[intid] || |
| (nsAccessToSecInt(intid, is_secure_access) && |
| irqNsacr[intid] == 0)) { |
| return; |
| } else { |
| // Valid SPI, set interrupt pending |
| sendInt(intid); |
| } |
| break; |
| } |
| |
| case GICD_CLRSPI_NSR: { |
| // Writes to this register have no effect if: |
| // * The value written specifies an invalid SPI. |
| // * The SPI is not pending. |
| // * The value written specifies a Secure SPI, the value is |
| // written by a Non-secure access, and the value of the |
| // corresponding GICD_NSACR<n> register is less than 0b10. |
| const uint32_t intid = bits(data, 9, 0); |
| if (isNotSPI(intid) || !irqPending[intid] || |
| (nsAccessToSecInt(intid, is_secure_access) && |
| irqNsacr[intid] < 2)) { |
| return; |
| } else { |
| // Valid SPI, clear interrupt pending |
| deassertSPI(intid); |
| } |
| break; |
| } |
| |
| case GICD_SETSPI_SR: { |
| // Writes to this register have no effect if: |
| // * GICD_CTLR.DS = 1 (WI) |
| // * The value written specifies an invalid SPI. |
| // * The SPI is already pending. |
| // * The value is written by a Non-secure access. |
| const uint32_t intid = bits(data, 9, 0); |
| if (DS || isNotSPI(intid) || irqPending[intid] || !is_secure_access) { |
| return; |
| } else { |
| // Valid SPI, set interrupt pending |
| sendInt(intid); |
| } |
| break; |
| } |
| |
| case GICD_CLRSPI_SR: { |
| // Writes to this register have no effect if: |
| // * GICD_CTLR.DS = 1 (WI) |
| // * The value written specifies an invalid SPI. |
| // * The SPI is not pending. |
| // * The value is written by a Non-secure access. |
| const uint32_t intid = bits(data, 9, 0); |
| if (DS || isNotSPI(intid) || !irqPending[intid] || !is_secure_access) { |
| return; |
| } else { |
| // Valid SPI, clear interrupt pending |
| deassertSPI(intid); |
| } |
| break; |
| } |
| |
| default: |
| panic("Gicv3Distributor::write(): invalid offset %#x\n", addr); |
| break; |
| } |
| } |
| |
| void |
| Gicv3Distributor::sendInt(uint32_t int_id) |
| { |
| panic_if(int_id < Gicv3::SGI_MAX + Gicv3::PPI_MAX, "Invalid SPI!"); |
| panic_if(int_id > itLines, "Invalid SPI!"); |
| irqPending[int_id] = true; |
| DPRINTF(GIC, "Gicv3Distributor::sendInt(): " |
| "int_id %d (SPI) pending bit set\n", int_id); |
| update(); |
| } |
| |
| void |
| Gicv3Distributor::deassertSPI(uint32_t int_id) |
| { |
| panic_if(int_id < Gicv3::SGI_MAX + Gicv3::PPI_MAX, "Invalid SPI!"); |
| panic_if(int_id > itLines, "Invalid SPI!"); |
| irqPending[int_id] = false; |
| clearIrqCpuInterface(int_id); |
| |
| update(); |
| } |
| |
| Gicv3CPUInterface* |
| Gicv3Distributor::route(uint32_t int_id) |
| { |
| IROUTER affinity_routing = irqAffinityRouting[int_id]; |
| Gicv3Redistributor * target_redistributor = nullptr; |
| |
| const Gicv3::GroupId int_group = getIntGroup(int_id); |
| |
| if (affinity_routing.IRM) { |
| // Interrupts routed to any PE defined as a participating node |
| for (int i = 0; i < gic->getSystem()->numContexts(); i++) { |
| Gicv3Redistributor * redistributor_i = |
| gic->getRedistributor(i); |
| |
| if (redistributor_i-> |
| canBeSelectedFor1toNInterrupt(int_group)) { |
| target_redistributor = redistributor_i; |
| break; |
| } |
| } |
| } else { |
| uint32_t affinity = (affinity_routing.Aff3 << 24) | |
| (affinity_routing.Aff2 << 16) | |
| (affinity_routing.Aff1 << 8) | |
| (affinity_routing.Aff0 << 0); |
| target_redistributor = |
| gic->getRedistributorByAffinity(affinity); |
| } |
| |
| if (!target_redistributor) { |
| // Interrrupts targeting not present cpus must remain pending |
| return nullptr; |
| } else { |
| return target_redistributor->getCPUInterface(); |
| } |
| } |
| |
| void |
| Gicv3Distributor::clearIrqCpuInterface(uint32_t int_id) |
| { |
| auto cpu_interface = route(int_id); |
| if (cpu_interface) |
| cpu_interface->resetHppi(int_id); |
| } |
| |
| void |
| Gicv3Distributor::update() |
| { |
| // Find the highest priority pending SPI |
| for (int int_id = Gicv3::SGI_MAX + Gicv3::PPI_MAX; int_id < itLines; |
| int_id++) { |
| Gicv3::GroupId int_group = getIntGroup(int_id); |
| bool group_enabled = groupEnabled(int_group); |
| |
| if (irqPending[int_id] && irqEnabled[int_id] && |
| !irqActive[int_id] && group_enabled) { |
| |
| // Find the cpu interface where to route the interrupt |
| Gicv3CPUInterface *target_cpu_interface = route(int_id); |
| |
| // Invalid routing |
| if (!target_cpu_interface) continue; |
| |
| if ((irqPriority[int_id] < target_cpu_interface->hppi.prio) || |
| (irqPriority[int_id] == target_cpu_interface->hppi.prio && |
| int_id < target_cpu_interface->hppi.intid)) { |
| |
| target_cpu_interface->hppi.intid = int_id; |
| target_cpu_interface->hppi.prio = irqPriority[int_id]; |
| target_cpu_interface->hppi.group = int_group; |
| } |
| } |
| } |
| |
| // Update all redistributors |
| for (int i = 0; i < gic->getSystem()->numContexts(); i++) { |
| gic->getRedistributor(i)->update(); |
| } |
| } |
| |
| Gicv3::IntStatus |
| Gicv3Distributor::intStatus(uint32_t int_id) const |
| { |
| panic_if(int_id < Gicv3::SGI_MAX + Gicv3::PPI_MAX, "Invalid SPI!"); |
| panic_if(int_id > itLines, "Invalid SPI!"); |
| |
| if (irqPending[int_id]) { |
| if (irqActive[int_id]) { |
| return Gicv3::INT_ACTIVE_PENDING; |
| } |
| |
| return Gicv3::INT_PENDING; |
| } else if (irqActive[int_id]) { |
| return Gicv3::INT_ACTIVE; |
| } else { |
| return Gicv3::INT_INACTIVE; |
| } |
| } |
| |
| Gicv3::GroupId |
| Gicv3Distributor::getIntGroup(int int_id) const |
| { |
| panic_if(int_id < Gicv3::SGI_MAX + Gicv3::PPI_MAX, "Invalid SPI!"); |
| panic_if(int_id > itLines, "Invalid SPI!"); |
| |
| if (DS) { |
| if (irqGroup[int_id] == 1) { |
| return Gicv3::G1NS; |
| } else { |
| return Gicv3::G0S; |
| } |
| } else { |
| if (irqGrpmod[int_id] == 0 && irqGroup[int_id] == 0) { |
| return Gicv3::G0S; |
| } else if (irqGrpmod[int_id] == 0 && irqGroup[int_id] == 1) { |
| return Gicv3::G1NS; |
| } else if (irqGrpmod[int_id] == 1 && irqGroup[int_id] == 0) { |
| return Gicv3::G1S; |
| } else if (irqGrpmod[int_id] == 1 && irqGroup[int_id] == 1) { |
| return Gicv3::G1NS; |
| } |
| } |
| |
| M5_UNREACHABLE; |
| } |
| |
| void |
| Gicv3Distributor::activateIRQ(uint32_t int_id) |
| { |
| irqPending[int_id] = false; |
| irqActive[int_id] = true; |
| } |
| |
| void |
| Gicv3Distributor::deactivateIRQ(uint32_t int_id) |
| { |
| irqActive[int_id] = false; |
| } |
| |
| void |
| Gicv3Distributor::serialize(CheckpointOut & cp) const |
| { |
| SERIALIZE_SCALAR(ARE); |
| SERIALIZE_SCALAR(DS); |
| SERIALIZE_SCALAR(EnableGrp1S); |
| SERIALIZE_SCALAR(EnableGrp1NS); |
| SERIALIZE_SCALAR(EnableGrp0); |
| SERIALIZE_CONTAINER(irqGroup); |
| SERIALIZE_CONTAINER(irqEnabled); |
| SERIALIZE_CONTAINER(irqPending); |
| SERIALIZE_CONTAINER(irqActive); |
| SERIALIZE_CONTAINER(irqPriority); |
| SERIALIZE_CONTAINER(irqConfig); |
| SERIALIZE_CONTAINER(irqGrpmod); |
| SERIALIZE_CONTAINER(irqNsacr); |
| SERIALIZE_CONTAINER(irqAffinityRouting); |
| } |
| |
| void |
| Gicv3Distributor::unserialize(CheckpointIn & cp) |
| { |
| UNSERIALIZE_SCALAR(ARE); |
| UNSERIALIZE_SCALAR(DS); |
| UNSERIALIZE_SCALAR(EnableGrp1S); |
| UNSERIALIZE_SCALAR(EnableGrp1NS); |
| UNSERIALIZE_SCALAR(EnableGrp0); |
| UNSERIALIZE_CONTAINER(irqGroup); |
| UNSERIALIZE_CONTAINER(irqEnabled); |
| UNSERIALIZE_CONTAINER(irqPending); |
| UNSERIALIZE_CONTAINER(irqActive); |
| UNSERIALIZE_CONTAINER(irqPriority); |
| UNSERIALIZE_CONTAINER(irqConfig); |
| UNSERIALIZE_CONTAINER(irqGrpmod); |
| UNSERIALIZE_CONTAINER(irqNsacr); |
| UNSERIALIZE_CONTAINER(irqAffinityRouting); |
| } |
