| /***************************************************************************** |
| |
| Licensed to Accellera Systems Initiative Inc. (Accellera) under one or |
| more contributor license agreements. See the NOTICE file distributed |
| with this work for additional information regarding copyright ownership. |
| Accellera licenses this file to you under the Apache License, Version 2.0 |
| (the "License"); you may not use this file except in compliance with the |
| License. You may obtain a copy of the License at |
| |
| http://www.apache.org/licenses/LICENSE-2.0 |
| |
| Unless required by applicable law or agreed to in writing, software |
| distributed under the License is distributed on an "AS IS" BASIS, |
| WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or |
| implied. See the License for the specific language governing |
| permissions and limitations under the License. |
| |
| *****************************************************************************/ |
| |
| //==================================================================== |
| // Nov 06, 2008 |
| // |
| // Updated by: |
| // Xiaopeng Qiu, JEDA Technologies, Inc |
| // Email: qiuxp@jedatechnologies.net |
| // |
| // To fix violations of TLM2.0 rules, which are detected by JEDA |
| // TLM2.0 checker. |
| // |
| //==================================================================== |
| |
| #ifndef __SIMPLE_AT_INITIATOR2_H__ |
| #define __SIMPLE_AT_INITIATOR2_H__ |
| |
| #include "tlm.h" |
| #include "tlm_utils/simple_initiator_socket.h" |
| //#include <systemc> |
| #include <cassert> |
| #include <queue> |
| //#include <iostream> |
| |
| class SimpleATInitiator2 : public sc_core::sc_module |
| { |
| public: |
| typedef tlm::tlm_generic_payload transaction_type; |
| typedef tlm::tlm_phase phase_type; |
| typedef tlm::tlm_sync_enum sync_enum_type; |
| typedef tlm_utils::simple_initiator_socket<SimpleATInitiator2> initiator_socket_type; |
| |
| public: |
| // extended transaction, holds tlm_generic_payload + data storage |
| template <typename DT> |
| class MyTransaction : public transaction_type |
| { |
| public: |
| MyTransaction() |
| { |
| this->set_data_ptr(reinterpret_cast<unsigned char*>(&mData)); |
| } |
| MyTransaction(tlm::tlm_mm_interface* mm) : transaction_type(mm) |
| { |
| this->set_data_ptr(reinterpret_cast<unsigned char*>(&mData)); |
| } |
| |
| void setData(DT& data) { mData = data; } |
| DT getData() const { return mData; } |
| |
| private: |
| DT mData; |
| }; |
| typedef MyTransaction<unsigned int> mytransaction_type; |
| |
| // Dummy Transaction Pool |
| class SimplePool : public tlm::tlm_mm_interface |
| { |
| public: |
| SimplePool() {} |
| mytransaction_type* claim() |
| { |
| mytransaction_type* t = new mytransaction_type(this); |
| t->acquire(); |
| return t; |
| } |
| void release(mytransaction_type* t) |
| { |
| t->release(); |
| } |
| void free(tlm::tlm_generic_payload* t) |
| { |
| t->reset(); |
| delete t; |
| } |
| }; |
| |
| public: |
| initiator_socket_type socket; |
| |
| public: |
| SC_HAS_PROCESS(SimpleATInitiator2); |
| SimpleATInitiator2(sc_core::sc_module_name name, |
| unsigned int nrOfTransactions = 0x5, |
| unsigned int baseAddress = 0) : |
| sc_core::sc_module(name), |
| socket("socket"), |
| ACCEPT_DELAY(10, sc_core::SC_NS), |
| mNrOfTransactions(nrOfTransactions), |
| mBaseAddress(baseAddress), |
| mTransactionCount(0), |
| mCurrentTransaction(0) |
| { |
| // register nb_transport method |
| socket.register_nb_transport_bw(this, &SimpleATInitiator2::myNBTransport); |
| |
| // Initiator thread |
| SC_THREAD(run); |
| } |
| |
| bool initTransaction(mytransaction_type*& trans) |
| { |
| if (mTransactionCount < mNrOfTransactions) { |
| trans = transPool.claim(); |
| trans->set_address(mBaseAddress + 4*mTransactionCount); |
| trans->setData(mTransactionCount); |
| trans->set_command(tlm::TLM_WRITE_COMMAND); |
| |
| } else if (mTransactionCount < 2 * mNrOfTransactions) { |
| trans = transPool.claim(); |
| trans->set_address(mBaseAddress + 4*(mTransactionCount - mNrOfTransactions)); |
| trans->set_command(tlm::TLM_READ_COMMAND); |
| |
| } else { |
| return false; |
| } |
| |
| trans->set_data_length(4); |
| trans->set_streaming_width(4); |
| |
| ++mTransactionCount; |
| return true; |
| } |
| |
| void logStartTransation(mytransaction_type& trans) |
| { |
| if (trans.get_command() == tlm::TLM_WRITE_COMMAND) { |
| std::cout << name() << ": Send write request: A = 0x" |
| << std::hex << (unsigned int)trans.get_address() |
| << ", D = 0x" << trans.getData() << std::dec |
| << " @ " << sc_core::sc_time_stamp() << std::endl; |
| |
| } else { |
| std::cout << name() << ": Send read request: A = 0x" |
| << std::hex << (unsigned int)trans.get_address() << std::dec |
| << " @ " << sc_core::sc_time_stamp() << std::endl; |
| } |
| } |
| |
| void logEndTransaction(mytransaction_type& trans) |
| { |
| if (trans.get_response_status() != tlm::TLM_OK_RESPONSE) { |
| std::cout << name() << ": Received error response @ " |
| << sc_core::sc_time_stamp() << std::endl; |
| |
| } else { |
| std::cout << name() << ": Received ok response"; |
| if (trans.get_command() == tlm::TLM_READ_COMMAND) { |
| std::cout << ": D = 0x" << std::hex << trans.getData() << std::dec; |
| } |
| std::cout << " @ " << sc_core::sc_time_stamp() << std::endl; |
| } |
| } |
| |
| // |
| // Simple AT Initiator |
| // - Request must be accepted by the target before the next request can be |
| // send |
| // - Responses can come out of order |
| // - Responses will be accepted after fixed delay |
| // |
| void run() |
| { |
| phase_type phase; |
| sc_core::sc_time t; |
| |
| mytransaction_type* ptrans; |
| while (initTransaction(ptrans)) { |
| // Create transaction and initialise phase and t |
| mytransaction_type& trans = *ptrans; |
| phase = tlm::BEGIN_REQ; |
| t = sc_core::SC_ZERO_TIME; |
| |
| logStartTransation(trans); |
| |
| switch (socket->nb_transport_fw(trans, phase, t)) { |
| case tlm::TLM_COMPLETED: |
| // Transaction Finished, wait for the returned delay |
| wait(t); |
| logEndTransaction(trans); |
| transPool.release(&trans); |
| break; |
| |
| case tlm::TLM_ACCEPTED: |
| case tlm::TLM_UPDATED: |
| switch (phase) { |
| case tlm::BEGIN_REQ: |
| // Request phase not yet finished |
| // Wait until end of request phase before sending new request |
| |
| // FIXME |
| mCurrentTransaction = &trans; |
| wait(mEndRequestPhase); |
| mCurrentTransaction = 0; |
| break; |
| |
| case tlm::END_REQ: |
| // Request phase ended |
| if (t != sc_core::SC_ZERO_TIME) { |
| // Wait until end of request time before sending new request |
| wait(t); |
| } |
| break; |
| |
| case tlm::BEGIN_RESP: |
| // Request phase ended and response phase already started |
| if (t != sc_core::SC_ZERO_TIME) { |
| // Wait until end of request time before sending new request |
| wait(t); |
| } |
| // Notify end of response phase after ACCEPT delay |
| t += ACCEPT_DELAY; |
| phase = tlm::END_RESP; |
| socket->nb_transport_fw(trans, phase, t); |
| logEndTransaction(trans); |
| transPool.release(&trans); |
| break; |
| |
| case tlm::END_RESP: // fall-through |
| default: |
| // A target should never return with these phases |
| // If phase == END_RESP, nb_transport should have returned true |
| assert(0); exit(1); |
| break; |
| } |
| break; |
| |
| default: |
| assert(0); exit(1); |
| }; |
| } |
| wait(); |
| |
| } |
| |
| sync_enum_type myNBTransport(transaction_type& trans, phase_type& phase, sc_core::sc_time& t) |
| { |
| switch (phase) { |
| case tlm::END_REQ: |
| assert(t == sc_core::SC_ZERO_TIME); // FIXME: can t != 0? |
| // Request phase ended |
| mEndRequestPhase.notify(sc_core::SC_ZERO_TIME); |
| return tlm::TLM_ACCEPTED; |
| |
| case tlm::BEGIN_RESP: |
| { |
| assert(t == sc_core::SC_ZERO_TIME); // FIXME: can t != 0? |
| |
| // Notify end of request phase if run thread is waiting for it |
| // FIXME |
| if (&trans == mCurrentTransaction) { |
| mEndRequestPhase.notify(sc_core::SC_ZERO_TIME); |
| } |
| |
| assert(dynamic_cast<mytransaction_type*>(&trans)); |
| mytransaction_type* myTrans = static_cast<mytransaction_type*>(&trans); |
| assert(myTrans); |
| |
| // Notify end of response phase after ACCEPT delay |
| t += ACCEPT_DELAY; |
| phase = tlm::END_RESP; |
| logEndTransaction(*myTrans); |
| transPool.release(myTrans); |
| |
| return tlm::TLM_COMPLETED; |
| } |
| |
| case tlm::BEGIN_REQ: // fall-through |
| case tlm::END_RESP: // fall-through |
| default: |
| // A target should never call nb_transport with these phases |
| assert(0); exit(1); |
| // return tlm::TLM_COMPLETED; //unreachable code |
| }; |
| } |
| |
| private: |
| const sc_core::sc_time ACCEPT_DELAY; |
| |
| private: |
| unsigned int mNrOfTransactions; |
| unsigned int mBaseAddress; |
| SimplePool transPool; |
| unsigned int mTransactionCount; |
| sc_core::sc_event mEndRequestPhase; |
| transaction_type* mCurrentTransaction; |
| }; |
| |
| #endif |