| /* |
| * Copyright (c) 2009 The Regents of The University of Michigan |
| * All rights reserved. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions are |
| * met: redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer; |
| * redistributions in binary form must reproduce the above copyright |
| * notice, this list of conditions and the following disclaimer in the |
| * documentation and/or other materials provided with the distribution; |
| * neither the name of the copyright holders nor the names of its |
| * contributors may be used to endorse or promote products derived from |
| * this software without specific prior written permission. |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS |
| * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT |
| * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR |
| * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT |
| * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, |
| * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT |
| * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, |
| * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY |
| * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
| * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE |
| * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| */ |
| |
| #include "arch/x86/isa.hh" |
| |
| #include "arch/x86/decoder.hh" |
| #include "arch/x86/mmu.hh" |
| #include "cpu/base.hh" |
| #include "cpu/thread_context.hh" |
| #include "params/X86ISA.hh" |
| #include "sim/serialize.hh" |
| |
| namespace X86ISA |
| { |
| |
| void |
| ISA::updateHandyM5Reg(Efer efer, CR0 cr0, |
| SegAttr csAttr, SegAttr ssAttr, RFLAGS rflags) |
| { |
| HandyM5Reg m5reg = 0; |
| if (efer.lma) { |
| m5reg.mode = LongMode; |
| if (csAttr.longMode) |
| m5reg.submode = SixtyFourBitMode; |
| else |
| m5reg.submode = CompatabilityMode; |
| } else { |
| m5reg.mode = LegacyMode; |
| if (cr0.pe) { |
| if (rflags.vm) |
| m5reg.submode = Virtual8086Mode; |
| else |
| m5reg.submode = ProtectedMode; |
| } else { |
| m5reg.submode = RealMode; |
| } |
| } |
| m5reg.cpl = csAttr.dpl; |
| m5reg.paging = cr0.pg; |
| m5reg.prot = cr0.pe; |
| |
| // Compute the default and alternate operand size. |
| if (m5reg.submode == SixtyFourBitMode || csAttr.defaultSize) { |
| m5reg.defOp = 2; |
| m5reg.altOp = 1; |
| } else { |
| m5reg.defOp = 1; |
| m5reg.altOp = 2; |
| } |
| |
| // Compute the default and alternate address size. |
| if (m5reg.submode == SixtyFourBitMode) { |
| m5reg.defAddr = 3; |
| m5reg.altAddr = 2; |
| } else if (csAttr.defaultSize) { |
| m5reg.defAddr = 2; |
| m5reg.altAddr = 1; |
| } else { |
| m5reg.defAddr = 1; |
| m5reg.altAddr = 2; |
| } |
| |
| // Compute the stack size |
| if (m5reg.submode == SixtyFourBitMode) { |
| m5reg.stack = 3; |
| } else if (ssAttr.defaultSize) { |
| m5reg.stack = 2; |
| } else { |
| m5reg.stack = 1; |
| } |
| |
| regVal[MISCREG_M5_REG] = m5reg; |
| if (tc) |
| tc->getDecoderPtr()->setM5Reg(m5reg); |
| } |
| |
| void |
| ISA::clear() |
| { |
| // Blank everything. 0 might not be an appropriate value for some things, |
| // but it is for most. |
| memset(regVal, 0, NumMiscRegs * sizeof(RegVal)); |
| |
| // If some state should be non-zero after a reset, set those values here. |
| regVal[MISCREG_CR0] = 0x0000000060000010ULL; |
| |
| regVal[MISCREG_MTRRCAP] = 0x0508; |
| |
| regVal[MISCREG_MCG_CAP] = 0x104; |
| |
| regVal[MISCREG_PAT] = 0x0007040600070406ULL; |
| |
| regVal[MISCREG_SYSCFG] = 0x20601; |
| |
| regVal[MISCREG_TOP_MEM] = 0x4000000; |
| |
| regVal[MISCREG_DR6] = (mask(8) << 4) | (mask(16) << 16); |
| regVal[MISCREG_DR7] = 1 << 10; |
| |
| LocalApicBase lApicBase = 0; |
| lApicBase.base = 0xFEE00000 >> 12; |
| lApicBase.enable = 1; |
| // The "bsp" bit will be set when this register is read, since then we'll |
| // have a ThreadContext to check the contextId from. |
| regVal[MISCREG_APIC_BASE] = lApicBase; |
| } |
| |
| ISA::ISA(const X86ISAParams &p) : BaseISA(p), vendorString(p.vendor_string) |
| { |
| fatal_if(vendorString.size() != 12, |
| "CPUID vendor string must be 12 characters\n"); |
| clear(); |
| } |
| |
| RegVal |
| ISA::readMiscRegNoEffect(int miscReg) const |
| { |
| // Make sure we're not dealing with an illegal control register. |
| // Instructions should filter out these indexes, and nothing else should |
| // attempt to read them directly. |
| assert(isValidMiscReg(miscReg)); |
| |
| return regVal[miscReg]; |
| } |
| |
| RegVal |
| ISA::readMiscReg(int miscReg) |
| { |
| if (miscReg == MISCREG_TSC) { |
| return regVal[MISCREG_TSC] + tc->getCpuPtr()->curCycle(); |
| } |
| |
| if (miscReg == MISCREG_FSW) { |
| RegVal fsw = regVal[MISCREG_FSW]; |
| RegVal top = regVal[MISCREG_X87_TOP]; |
| return insertBits(fsw, 13, 11, top); |
| } |
| |
| if (miscReg == MISCREG_APIC_BASE) { |
| LocalApicBase base = regVal[MISCREG_APIC_BASE]; |
| base.bsp = (tc->contextId() == 0); |
| return base; |
| } |
| |
| return readMiscRegNoEffect(miscReg); |
| } |
| |
| void |
| ISA::setMiscRegNoEffect(int miscReg, RegVal val) |
| { |
| // Make sure we're not dealing with an illegal control register. |
| // Instructions should filter out these indexes, and nothing else should |
| // attempt to write to them directly. |
| assert(isValidMiscReg(miscReg)); |
| |
| HandyM5Reg m5Reg = regVal[MISCREG_M5_REG]; |
| int reg_width = 64; |
| switch (miscReg) { |
| case MISCREG_X87_TOP: |
| reg_width = 3; |
| break; |
| case MISCREG_FTW: |
| reg_width = 8; |
| break; |
| case MISCREG_FSW: |
| case MISCREG_FCW: |
| case MISCREG_FOP: |
| reg_width = 16; |
| break; |
| case MISCREG_MXCSR: |
| reg_width = 32; |
| break; |
| case MISCREG_FISEG: |
| case MISCREG_FOSEG: |
| if (m5Reg.submode != SixtyFourBitMode) |
| reg_width = 16; |
| break; |
| case MISCREG_FIOFF: |
| case MISCREG_FOOFF: |
| if (m5Reg.submode != SixtyFourBitMode) |
| reg_width = 32; |
| break; |
| default: |
| break; |
| } |
| |
| regVal[miscReg] = val & mask(reg_width); |
| } |
| |
| void |
| ISA::setMiscReg(int miscReg, RegVal val) |
| { |
| RegVal newVal = val; |
| switch(miscReg) |
| { |
| case MISCREG_CR0: |
| { |
| CR0 toggled = regVal[miscReg] ^ val; |
| CR0 newCR0 = val; |
| Efer efer = regVal[MISCREG_EFER]; |
| if (toggled.pg && efer.lme) { |
| if (newCR0.pg) { |
| //Turning on long mode |
| efer.lma = 1; |
| regVal[MISCREG_EFER] = efer; |
| } else { |
| //Turning off long mode |
| efer.lma = 0; |
| regVal[MISCREG_EFER] = efer; |
| } |
| } |
| if (toggled.pg) { |
| tc->getMMUPtr()->flushAll(); |
| } |
| //This must always be 1. |
| newCR0.et = 1; |
| newVal = newCR0; |
| updateHandyM5Reg(regVal[MISCREG_EFER], |
| newCR0, |
| regVal[MISCREG_CS_ATTR], |
| regVal[MISCREG_SS_ATTR], |
| regVal[MISCREG_RFLAGS]); |
| } |
| break; |
| case MISCREG_CR2: |
| break; |
| case MISCREG_CR3: |
| static_cast<MMU *>(tc->getMMUPtr())->flushNonGlobal(); |
| break; |
| case MISCREG_CR4: |
| { |
| CR4 toggled = regVal[miscReg] ^ val; |
| if (toggled.pae || toggled.pse || toggled.pge) { |
| tc->getMMUPtr()->flushAll(); |
| } |
| } |
| break; |
| case MISCREG_CR8: |
| break; |
| case MISCREG_CS_ATTR: |
| { |
| SegAttr toggled = regVal[miscReg] ^ val; |
| SegAttr newCSAttr = val; |
| if (toggled.longMode) { |
| if (newCSAttr.longMode) { |
| regVal[MISCREG_ES_EFF_BASE] = 0; |
| regVal[MISCREG_CS_EFF_BASE] = 0; |
| regVal[MISCREG_SS_EFF_BASE] = 0; |
| regVal[MISCREG_DS_EFF_BASE] = 0; |
| } else { |
| regVal[MISCREG_ES_EFF_BASE] = regVal[MISCREG_ES_BASE]; |
| regVal[MISCREG_CS_EFF_BASE] = regVal[MISCREG_CS_BASE]; |
| regVal[MISCREG_SS_EFF_BASE] = regVal[MISCREG_SS_BASE]; |
| regVal[MISCREG_DS_EFF_BASE] = regVal[MISCREG_DS_BASE]; |
| } |
| } |
| updateHandyM5Reg(regVal[MISCREG_EFER], |
| regVal[MISCREG_CR0], |
| newCSAttr, |
| regVal[MISCREG_SS_ATTR], |
| regVal[MISCREG_RFLAGS]); |
| } |
| break; |
| case MISCREG_SS_ATTR: |
| updateHandyM5Reg(regVal[MISCREG_EFER], |
| regVal[MISCREG_CR0], |
| regVal[MISCREG_CS_ATTR], |
| val, |
| regVal[MISCREG_RFLAGS]); |
| break; |
| // These segments always actually use their bases, or in other words |
| // their effective bases must stay equal to their actual bases. |
| case MISCREG_FS_BASE: |
| case MISCREG_GS_BASE: |
| case MISCREG_HS_BASE: |
| case MISCREG_TSL_BASE: |
| case MISCREG_TSG_BASE: |
| case MISCREG_TR_BASE: |
| case MISCREG_IDTR_BASE: |
| regVal[MISCREG_SEG_EFF_BASE(miscReg - MISCREG_SEG_BASE_BASE)] = val; |
| break; |
| // These segments ignore their bases in 64 bit mode. |
| // their effective bases must stay equal to their actual bases. |
| case MISCREG_ES_BASE: |
| case MISCREG_CS_BASE: |
| case MISCREG_SS_BASE: |
| case MISCREG_DS_BASE: |
| { |
| Efer efer = regVal[MISCREG_EFER]; |
| SegAttr csAttr = regVal[MISCREG_CS_ATTR]; |
| if (!efer.lma || !csAttr.longMode) // Check for non 64 bit mode. |
| regVal[MISCREG_SEG_EFF_BASE(miscReg - |
| MISCREG_SEG_BASE_BASE)] = val; |
| } |
| break; |
| case MISCREG_TSC: |
| regVal[MISCREG_TSC] = val - tc->getCpuPtr()->curCycle(); |
| return; |
| case MISCREG_DR0: |
| case MISCREG_DR1: |
| case MISCREG_DR2: |
| case MISCREG_DR3: |
| /* These should eventually set up breakpoints. */ |
| break; |
| case MISCREG_DR4: |
| miscReg = MISCREG_DR6; |
| M5_FALLTHROUGH; |
| case MISCREG_DR6: |
| { |
| DR6 dr6 = regVal[MISCREG_DR6]; |
| DR6 newDR6 = val; |
| dr6.b0 = newDR6.b0; |
| dr6.b1 = newDR6.b1; |
| dr6.b2 = newDR6.b2; |
| dr6.b3 = newDR6.b3; |
| dr6.bd = newDR6.bd; |
| dr6.bs = newDR6.bs; |
| dr6.bt = newDR6.bt; |
| newVal = dr6; |
| } |
| break; |
| case MISCREG_DR5: |
| miscReg = MISCREG_DR7; |
| M5_FALLTHROUGH; |
| case MISCREG_DR7: |
| { |
| DR7 dr7 = regVal[MISCREG_DR7]; |
| DR7 newDR7 = val; |
| dr7.l0 = newDR7.l0; |
| dr7.g0 = newDR7.g0; |
| if (dr7.l0 || dr7.g0) { |
| panic("Debug register breakpoints not implemented.\n"); |
| } else { |
| /* Disable breakpoint 0. */ |
| } |
| dr7.l1 = newDR7.l1; |
| dr7.g1 = newDR7.g1; |
| if (dr7.l1 || dr7.g1) { |
| panic("Debug register breakpoints not implemented.\n"); |
| } else { |
| /* Disable breakpoint 1. */ |
| } |
| dr7.l2 = newDR7.l2; |
| dr7.g2 = newDR7.g2; |
| if (dr7.l2 || dr7.g2) { |
| panic("Debug register breakpoints not implemented.\n"); |
| } else { |
| /* Disable breakpoint 2. */ |
| } |
| dr7.l3 = newDR7.l3; |
| dr7.g3 = newDR7.g3; |
| if (dr7.l3 || dr7.g3) { |
| panic("Debug register breakpoints not implemented.\n"); |
| } else { |
| /* Disable breakpoint 3. */ |
| } |
| dr7.gd = newDR7.gd; |
| dr7.rw0 = newDR7.rw0; |
| dr7.len0 = newDR7.len0; |
| dr7.rw1 = newDR7.rw1; |
| dr7.len1 = newDR7.len1; |
| dr7.rw2 = newDR7.rw2; |
| dr7.len2 = newDR7.len2; |
| dr7.rw3 = newDR7.rw3; |
| dr7.len3 = newDR7.len3; |
| } |
| break; |
| case MISCREG_M5_REG: |
| // Writing anything to the m5reg with side effects makes it update |
| // based on the current values of the relevant registers. The actual |
| // value written is discarded. |
| updateHandyM5Reg(regVal[MISCREG_EFER], |
| regVal[MISCREG_CR0], |
| regVal[MISCREG_CS_ATTR], |
| regVal[MISCREG_SS_ATTR], |
| regVal[MISCREG_RFLAGS]); |
| return; |
| default: |
| break; |
| } |
| setMiscRegNoEffect(miscReg, newVal); |
| } |
| |
| void |
| ISA::serialize(CheckpointOut &cp) const |
| { |
| SERIALIZE_ARRAY(regVal, NumMiscRegs); |
| } |
| |
| void |
| ISA::unserialize(CheckpointIn &cp) |
| { |
| UNSERIALIZE_ARRAY(regVal, NumMiscRegs); |
| updateHandyM5Reg(regVal[MISCREG_EFER], |
| regVal[MISCREG_CR0], |
| regVal[MISCREG_CS_ATTR], |
| regVal[MISCREG_SS_ATTR], |
| regVal[MISCREG_RFLAGS]); |
| } |
| |
| void |
| ISA::setThreadContext(ThreadContext *_tc) |
| { |
| BaseISA::setThreadContext(_tc); |
| tc->getDecoderPtr()->setM5Reg(regVal[MISCREG_M5_REG]); |
| } |
| |
| std::string |
| ISA::getVendorString() const |
| { |
| return vendorString; |
| } |
| |
| } |
