| /* |
| * Copyright (c) 2010-2012, 2014-2019 ARM Limited |
| * Copyright (c) 2013 Advanced Micro Devices, Inc. |
| * All rights reserved. |
| * |
| * The license below extends only to copyright in the software and shall |
| * not be construed as granting a license to any other intellectual |
| * property including but not limited to intellectual property relating |
| * to a hardware implementation of the functionality of the software |
| * licensed hereunder. You may use the software subject to the license |
| * terms below provided that you ensure that this notice is replicated |
| * unmodified and in its entirety in all distributions of the software, |
| * modified or unmodified, in source code or in binary form. |
| * |
| * Copyright (c) 2004-2006 The Regents of The University of Michigan |
| * All rights reserved. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions are |
| * met: redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer; |
| * redistributions in binary form must reproduce the above copyright |
| * notice, this list of conditions and the following disclaimer in the |
| * documentation and/or other materials provided with the distribution; |
| * neither the name of the copyright holders nor the names of its |
| * contributors may be used to endorse or promote products derived from |
| * this software without specific prior written permission. |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS |
| * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT |
| * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR |
| * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT |
| * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, |
| * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT |
| * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, |
| * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY |
| * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
| * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE |
| * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| */ |
| |
| #ifndef __CPU_O3_RENAME_IMPL_HH__ |
| #define __CPU_O3_RENAME_IMPL_HH__ |
| |
| #include <list> |
| |
| #include "arch/registers.hh" |
| #include "config/the_isa.hh" |
| #include "cpu/o3/rename.hh" |
| #include "cpu/reg_class.hh" |
| #include "debug/Activity.hh" |
| #include "debug/Rename.hh" |
| #include "debug/O3PipeView.hh" |
| #include "params/DerivO3CPU.hh" |
| |
| template <class Impl> |
| DefaultRename<Impl>::DefaultRename(O3CPU *_cpu, const DerivO3CPUParams ¶ms) |
| : cpu(_cpu), |
| iewToRenameDelay(params.iewToRenameDelay), |
| decodeToRenameDelay(params.decodeToRenameDelay), |
| commitToRenameDelay(params.commitToRenameDelay), |
| renameWidth(params.renameWidth), |
| commitWidth(params.commitWidth), |
| numThreads(params.numThreads), |
| stats(_cpu) |
| { |
| if (renameWidth > Impl::MaxWidth) |
| fatal("renameWidth (%d) is larger than compiled limit (%d),\n" |
| "\tincrease MaxWidth in src/cpu/o3/impl.hh\n", |
| renameWidth, static_cast<int>(Impl::MaxWidth)); |
| |
| // @todo: Make into a parameter. |
| skidBufferMax = (decodeToRenameDelay + 1) * params.decodeWidth; |
| for (uint32_t tid = 0; tid < Impl::MaxThreads; tid++) { |
| renameStatus[tid] = Idle; |
| renameMap[tid] = nullptr; |
| instsInProgress[tid] = 0; |
| loadsInProgress[tid] = 0; |
| storesInProgress[tid] = 0; |
| freeEntries[tid] = {0, 0, 0, 0}; |
| emptyROB[tid] = true; |
| stalls[tid] = {false, false}; |
| serializeInst[tid] = nullptr; |
| serializeOnNextInst[tid] = false; |
| } |
| } |
| |
| template <class Impl> |
| std::string |
| DefaultRename<Impl>::name() const |
| { |
| return cpu->name() + ".rename"; |
| } |
| |
| template <class Impl> |
| DefaultRename<Impl>::RenameStats::RenameStats(Stats::Group *parent) |
| : Stats::Group(parent, "rename"), |
| ADD_STAT(squashCycles, UNIT_CYCLE, |
| "Number of cycles rename is squashing"), |
| ADD_STAT(idleCycles, UNIT_CYCLE, "Number of cycles rename is idle"), |
| ADD_STAT(blockCycles, UNIT_CYCLE, "Number of cycles rename is blocking"), |
| ADD_STAT(serializeStallCycles, UNIT_CYCLE, |
| "count of cycles rename stalled for serializing inst"), |
| ADD_STAT(runCycles, UNIT_CYCLE, "Number of cycles rename is running"), |
| ADD_STAT(unblockCycles, UNIT_CYCLE, |
| "Number of cycles rename is unblocking"), |
| ADD_STAT(renamedInsts, UNIT_COUNT, |
| "Number of instructions processed by rename"), |
| ADD_STAT(squashedInsts, UNIT_COUNT, |
| "Number of squashed instructions processed by rename"), |
| ADD_STAT(ROBFullEvents, UNIT_COUNT, |
| "Number of times rename has blocked due to ROB full"), |
| ADD_STAT(IQFullEvents, UNIT_COUNT, |
| "Number of times rename has blocked due to IQ full"), |
| ADD_STAT(LQFullEvents, UNIT_COUNT, |
| "Number of times rename has blocked due to LQ full" ), |
| ADD_STAT(SQFullEvents, UNIT_COUNT, |
| "Number of times rename has blocked due to SQ full"), |
| ADD_STAT(fullRegistersEvents, UNIT_COUNT, |
| "Number of times there has been no free registers"), |
| ADD_STAT(renamedOperands, UNIT_COUNT, |
| "Number of destination operands rename has renamed"), |
| ADD_STAT(lookups, UNIT_COUNT, |
| "Number of register rename lookups that rename has made"), |
| ADD_STAT(intLookups, UNIT_COUNT, "Number of integer rename lookups"), |
| ADD_STAT(fpLookups, UNIT_COUNT, "Number of floating rename lookups"), |
| ADD_STAT(vecLookups, UNIT_COUNT, "Number of vector rename lookups"), |
| ADD_STAT(vecPredLookups, UNIT_COUNT, |
| "Number of vector predicate rename lookups"), |
| ADD_STAT(committedMaps, UNIT_COUNT, |
| "Number of HB maps that are committed"), |
| ADD_STAT(undoneMaps, UNIT_COUNT, |
| "Number of HB maps that are undone due to squashing"), |
| ADD_STAT(serializing, UNIT_COUNT, "count of serializing insts renamed"), |
| ADD_STAT(tempSerializing, UNIT_COUNT, |
| "count of temporary serializing insts renamed"), |
| ADD_STAT(skidInsts, UNIT_COUNT, |
| "count of insts added to the skid buffer") |
| { |
| squashCycles.prereq(squashCycles); |
| idleCycles.prereq(idleCycles); |
| blockCycles.prereq(blockCycles); |
| serializeStallCycles.flags(Stats::total); |
| runCycles.prereq(idleCycles); |
| unblockCycles.prereq(unblockCycles); |
| |
| renamedInsts.prereq(renamedInsts); |
| squashedInsts.prereq(squashedInsts); |
| |
| ROBFullEvents.prereq(ROBFullEvents); |
| IQFullEvents.prereq(IQFullEvents); |
| LQFullEvents.prereq(LQFullEvents); |
| SQFullEvents.prereq(SQFullEvents); |
| fullRegistersEvents.prereq(fullRegistersEvents); |
| |
| renamedOperands.prereq(renamedOperands); |
| lookups.prereq(lookups); |
| intLookups.prereq(intLookups); |
| fpLookups.prereq(fpLookups); |
| vecLookups.prereq(vecLookups); |
| vecPredLookups.prereq(vecPredLookups); |
| |
| committedMaps.prereq(committedMaps); |
| undoneMaps.prereq(undoneMaps); |
| serializing.flags(Stats::total); |
| tempSerializing.flags(Stats::total); |
| skidInsts.flags(Stats::total); |
| } |
| |
| template <class Impl> |
| void |
| DefaultRename<Impl>::regProbePoints() |
| { |
| ppRename = new ProbePointArg<DynInstPtr>(cpu->getProbeManager(), "Rename"); |
| ppSquashInRename = new ProbePointArg<SeqNumRegPair>(cpu->getProbeManager(), |
| "SquashInRename"); |
| } |
| |
| template <class Impl> |
| void |
| DefaultRename<Impl>::setTimeBuffer(TimeBuffer<TimeStruct> *tb_ptr) |
| { |
| timeBuffer = tb_ptr; |
| |
| // Setup wire to read information from time buffer, from IEW stage. |
| fromIEW = timeBuffer->getWire(-iewToRenameDelay); |
| |
| // Setup wire to read infromation from time buffer, from commit stage. |
| fromCommit = timeBuffer->getWire(-commitToRenameDelay); |
| |
| // Setup wire to write information to previous stages. |
| toDecode = timeBuffer->getWire(0); |
| } |
| |
| template <class Impl> |
| void |
| DefaultRename<Impl>::setRenameQueue(TimeBuffer<RenameStruct> *rq_ptr) |
| { |
| renameQueue = rq_ptr; |
| |
| // Setup wire to write information to future stages. |
| toIEW = renameQueue->getWire(0); |
| } |
| |
| template <class Impl> |
| void |
| DefaultRename<Impl>::setDecodeQueue(TimeBuffer<DecodeStruct> *dq_ptr) |
| { |
| decodeQueue = dq_ptr; |
| |
| // Setup wire to get information from decode. |
| fromDecode = decodeQueue->getWire(-decodeToRenameDelay); |
| } |
| |
| template <class Impl> |
| void |
| DefaultRename<Impl>::startupStage() |
| { |
| resetStage(); |
| } |
| |
| template <class Impl> |
| void |
| DefaultRename<Impl>::clearStates(ThreadID tid) |
| { |
| renameStatus[tid] = Idle; |
| |
| freeEntries[tid].iqEntries = iew_ptr->instQueue.numFreeEntries(tid); |
| freeEntries[tid].lqEntries = iew_ptr->ldstQueue.numFreeLoadEntries(tid); |
| freeEntries[tid].sqEntries = iew_ptr->ldstQueue.numFreeStoreEntries(tid); |
| freeEntries[tid].robEntries = commit_ptr->numROBFreeEntries(tid); |
| emptyROB[tid] = true; |
| |
| stalls[tid].iew = false; |
| serializeInst[tid] = NULL; |
| |
| instsInProgress[tid] = 0; |
| loadsInProgress[tid] = 0; |
| storesInProgress[tid] = 0; |
| |
| serializeOnNextInst[tid] = false; |
| } |
| |
| template <class Impl> |
| void |
| DefaultRename<Impl>::resetStage() |
| { |
| _status = Inactive; |
| |
| resumeSerialize = false; |
| resumeUnblocking = false; |
| |
| // Grab the number of free entries directly from the stages. |
| for (ThreadID tid = 0; tid < numThreads; tid++) { |
| renameStatus[tid] = Idle; |
| |
| freeEntries[tid].iqEntries = iew_ptr->instQueue.numFreeEntries(tid); |
| freeEntries[tid].lqEntries = iew_ptr->ldstQueue.numFreeLoadEntries(tid); |
| freeEntries[tid].sqEntries = iew_ptr->ldstQueue.numFreeStoreEntries(tid); |
| freeEntries[tid].robEntries = commit_ptr->numROBFreeEntries(tid); |
| emptyROB[tid] = true; |
| |
| stalls[tid].iew = false; |
| serializeInst[tid] = NULL; |
| |
| instsInProgress[tid] = 0; |
| loadsInProgress[tid] = 0; |
| storesInProgress[tid] = 0; |
| |
| serializeOnNextInst[tid] = false; |
| } |
| } |
| |
| template<class Impl> |
| void |
| DefaultRename<Impl>::setActiveThreads(std::list<ThreadID> *at_ptr) |
| { |
| activeThreads = at_ptr; |
| } |
| |
| |
| template <class Impl> |
| void |
| DefaultRename<Impl>::setRenameMap(RenameMap rm_ptr[]) |
| { |
| for (ThreadID tid = 0; tid < numThreads; tid++) |
| renameMap[tid] = &rm_ptr[tid]; |
| } |
| |
| template <class Impl> |
| void |
| DefaultRename<Impl>::setFreeList(FreeList *fl_ptr) |
| { |
| freeList = fl_ptr; |
| } |
| |
| template<class Impl> |
| void |
| DefaultRename<Impl>::setScoreboard(Scoreboard *_scoreboard) |
| { |
| scoreboard = _scoreboard; |
| } |
| |
| template <class Impl> |
| bool |
| DefaultRename<Impl>::isDrained() const |
| { |
| for (ThreadID tid = 0; tid < numThreads; tid++) { |
| if (instsInProgress[tid] != 0 || |
| !historyBuffer[tid].empty() || |
| !skidBuffer[tid].empty() || |
| !insts[tid].empty() || |
| (renameStatus[tid] != Idle && renameStatus[tid] != Running)) |
| return false; |
| } |
| return true; |
| } |
| |
| template <class Impl> |
| void |
| DefaultRename<Impl>::takeOverFrom() |
| { |
| resetStage(); |
| } |
| |
| template <class Impl> |
| void |
| DefaultRename<Impl>::drainSanityCheck() const |
| { |
| for (ThreadID tid = 0; tid < numThreads; tid++) { |
| assert(historyBuffer[tid].empty()); |
| assert(insts[tid].empty()); |
| assert(skidBuffer[tid].empty()); |
| assert(instsInProgress[tid] == 0); |
| } |
| } |
| |
| template <class Impl> |
| void |
| DefaultRename<Impl>::squash(const InstSeqNum &squash_seq_num, ThreadID tid) |
| { |
| DPRINTF(Rename, "[tid:%i] [squash sn:%llu] Squashing instructions.\n", |
| tid,squash_seq_num); |
| |
| // Clear the stall signal if rename was blocked or unblocking before. |
| // If it still needs to block, the blocking should happen the next |
| // cycle and there should be space to hold everything due to the squash. |
| if (renameStatus[tid] == Blocked || |
| renameStatus[tid] == Unblocking) { |
| toDecode->renameUnblock[tid] = 1; |
| |
| resumeSerialize = false; |
| serializeInst[tid] = NULL; |
| } else if (renameStatus[tid] == SerializeStall) { |
| if (serializeInst[tid]->seqNum <= squash_seq_num) { |
| DPRINTF(Rename, "[tid:%i] [squash sn:%llu] " |
| "Rename will resume serializing after squash\n", |
| tid,squash_seq_num); |
| resumeSerialize = true; |
| assert(serializeInst[tid]); |
| } else { |
| resumeSerialize = false; |
| toDecode->renameUnblock[tid] = 1; |
| |
| serializeInst[tid] = NULL; |
| } |
| } |
| |
| // Set the status to Squashing. |
| renameStatus[tid] = Squashing; |
| |
| // Squash any instructions from decode. |
| for (int i=0; i<fromDecode->size; i++) { |
| if (fromDecode->insts[i]->threadNumber == tid && |
| fromDecode->insts[i]->seqNum > squash_seq_num) { |
| fromDecode->insts[i]->setSquashed(); |
| wroteToTimeBuffer = true; |
| } |
| |
| } |
| |
| // Clear the instruction list and skid buffer in case they have any |
| // insts in them. |
| insts[tid].clear(); |
| |
| // Clear the skid buffer in case it has any data in it. |
| skidBuffer[tid].clear(); |
| |
| doSquash(squash_seq_num, tid); |
| } |
| |
| template <class Impl> |
| void |
| DefaultRename<Impl>::tick() |
| { |
| wroteToTimeBuffer = false; |
| |
| blockThisCycle = false; |
| |
| bool status_change = false; |
| |
| toIEWIndex = 0; |
| |
| sortInsts(); |
| |
| std::list<ThreadID>::iterator threads = activeThreads->begin(); |
| std::list<ThreadID>::iterator end = activeThreads->end(); |
| |
| // Check stall and squash signals. |
| while (threads != end) { |
| ThreadID tid = *threads++; |
| |
| DPRINTF(Rename, "Processing [tid:%i]\n", tid); |
| |
| status_change = checkSignalsAndUpdate(tid) || status_change; |
| |
| rename(status_change, tid); |
| } |
| |
| if (status_change) { |
| updateStatus(); |
| } |
| |
| if (wroteToTimeBuffer) { |
| DPRINTF(Activity, "Activity this cycle.\n"); |
| cpu->activityThisCycle(); |
| } |
| |
| threads = activeThreads->begin(); |
| |
| while (threads != end) { |
| ThreadID tid = *threads++; |
| |
| // If we committed this cycle then doneSeqNum will be > 0 |
| if (fromCommit->commitInfo[tid].doneSeqNum != 0 && |
| !fromCommit->commitInfo[tid].squash && |
| renameStatus[tid] != Squashing) { |
| |
| removeFromHistory(fromCommit->commitInfo[tid].doneSeqNum, |
| tid); |
| } |
| } |
| |
| // @todo: make into updateProgress function |
| for (ThreadID tid = 0; tid < numThreads; tid++) { |
| instsInProgress[tid] -= fromIEW->iewInfo[tid].dispatched; |
| loadsInProgress[tid] -= fromIEW->iewInfo[tid].dispatchedToLQ; |
| storesInProgress[tid] -= fromIEW->iewInfo[tid].dispatchedToSQ; |
| assert(loadsInProgress[tid] >= 0); |
| assert(storesInProgress[tid] >= 0); |
| assert(instsInProgress[tid] >=0); |
| } |
| |
| } |
| |
| template<class Impl> |
| void |
| DefaultRename<Impl>::rename(bool &status_change, ThreadID tid) |
| { |
| // If status is Running or idle, |
| // call renameInsts() |
| // If status is Unblocking, |
| // buffer any instructions coming from decode |
| // continue trying to empty skid buffer |
| // check if stall conditions have passed |
| |
| if (renameStatus[tid] == Blocked) { |
| ++stats.blockCycles; |
| } else if (renameStatus[tid] == Squashing) { |
| ++stats.squashCycles; |
| } else if (renameStatus[tid] == SerializeStall) { |
| ++stats.serializeStallCycles; |
| // If we are currently in SerializeStall and resumeSerialize |
| // was set, then that means that we are resuming serializing |
| // this cycle. Tell the previous stages to block. |
| if (resumeSerialize) { |
| resumeSerialize = false; |
| block(tid); |
| toDecode->renameUnblock[tid] = false; |
| } |
| } else if (renameStatus[tid] == Unblocking) { |
| if (resumeUnblocking) { |
| block(tid); |
| resumeUnblocking = false; |
| toDecode->renameUnblock[tid] = false; |
| } |
| } |
| |
| if (renameStatus[tid] == Running || |
| renameStatus[tid] == Idle) { |
| DPRINTF(Rename, |
| "[tid:%i] " |
| "Not blocked, so attempting to run stage.\n", |
| tid); |
| |
| renameInsts(tid); |
| } else if (renameStatus[tid] == Unblocking) { |
| renameInsts(tid); |
| |
| if (validInsts()) { |
| // Add the current inputs to the skid buffer so they can be |
| // reprocessed when this stage unblocks. |
| skidInsert(tid); |
| } |
| |
| // If we switched over to blocking, then there's a potential for |
| // an overall status change. |
| status_change = unblock(tid) || status_change || blockThisCycle; |
| } |
| } |
| |
| template <class Impl> |
| void |
| DefaultRename<Impl>::renameInsts(ThreadID tid) |
| { |
| // Instructions can be either in the skid buffer or the queue of |
| // instructions coming from decode, depending on the status. |
| int insts_available = renameStatus[tid] == Unblocking ? |
| skidBuffer[tid].size() : insts[tid].size(); |
| |
| // Check the decode queue to see if instructions are available. |
| // If there are no available instructions to rename, then do nothing. |
| if (insts_available == 0) { |
| DPRINTF(Rename, "[tid:%i] Nothing to do, breaking out early.\n", |
| tid); |
| // Should I change status to idle? |
| ++stats.idleCycles; |
| return; |
| } else if (renameStatus[tid] == Unblocking) { |
| ++stats.unblockCycles; |
| } else if (renameStatus[tid] == Running) { |
| ++stats.runCycles; |
| } |
| |
| // Will have to do a different calculation for the number of free |
| // entries. |
| int free_rob_entries = calcFreeROBEntries(tid); |
| int free_iq_entries = calcFreeIQEntries(tid); |
| int min_free_entries = free_rob_entries; |
| |
| FullSource source = ROB; |
| |
| if (free_iq_entries < min_free_entries) { |
| min_free_entries = free_iq_entries; |
| source = IQ; |
| } |
| |
| // Check if there's any space left. |
| if (min_free_entries <= 0) { |
| DPRINTF(Rename, |
| "[tid:%i] Blocking due to no free ROB/IQ/ entries.\n" |
| "ROB has %i free entries.\n" |
| "IQ has %i free entries.\n", |
| tid, free_rob_entries, free_iq_entries); |
| |
| blockThisCycle = true; |
| |
| block(tid); |
| |
| incrFullStat(source); |
| |
| return; |
| } else if (min_free_entries < insts_available) { |
| DPRINTF(Rename, |
| "[tid:%i] " |
| "Will have to block this cycle. " |
| "%i insts available, " |
| "but only %i insts can be renamed due to ROB/IQ/LSQ limits.\n", |
| tid, insts_available, min_free_entries); |
| |
| insts_available = min_free_entries; |
| |
| blockThisCycle = true; |
| |
| incrFullStat(source); |
| } |
| |
| InstQueue &insts_to_rename = renameStatus[tid] == Unblocking ? |
| skidBuffer[tid] : insts[tid]; |
| |
| DPRINTF(Rename, |
| "[tid:%i] " |
| "%i available instructions to send iew.\n", |
| tid, insts_available); |
| |
| DPRINTF(Rename, |
| "[tid:%i] " |
| "%i insts pipelining from Rename | " |
| "%i insts dispatched to IQ last cycle.\n", |
| tid, instsInProgress[tid], fromIEW->iewInfo[tid].dispatched); |
| |
| // Handle serializing the next instruction if necessary. |
| if (serializeOnNextInst[tid]) { |
| if (emptyROB[tid] && instsInProgress[tid] == 0) { |
| // ROB already empty; no need to serialize. |
| serializeOnNextInst[tid] = false; |
| } else if (!insts_to_rename.empty()) { |
| insts_to_rename.front()->setSerializeBefore(); |
| } |
| } |
| |
| int renamed_insts = 0; |
| |
| while (insts_available > 0 && toIEWIndex < renameWidth) { |
| DPRINTF(Rename, "[tid:%i] Sending instructions to IEW.\n", tid); |
| |
| assert(!insts_to_rename.empty()); |
| |
| DynInstPtr inst = insts_to_rename.front(); |
| |
| //For all kind of instructions, check ROB and IQ first |
| //For load instruction, check LQ size and take into account the inflight loads |
| //For store instruction, check SQ size and take into account the inflight stores |
| |
| if (inst->isLoad()) { |
| if (calcFreeLQEntries(tid) <= 0) { |
| DPRINTF(Rename, "[tid:%i] Cannot rename due to no free LQ\n", |
| tid); |
| source = LQ; |
| incrFullStat(source); |
| break; |
| } |
| } |
| |
| if (inst->isStore() || inst->isAtomic()) { |
| if (calcFreeSQEntries(tid) <= 0) { |
| DPRINTF(Rename, "[tid:%i] Cannot rename due to no free SQ\n", |
| tid); |
| source = SQ; |
| incrFullStat(source); |
| break; |
| } |
| } |
| |
| insts_to_rename.pop_front(); |
| |
| if (renameStatus[tid] == Unblocking) { |
| DPRINTF(Rename, |
| "[tid:%i] " |
| "Removing [sn:%llu] PC:%s from rename skidBuffer\n", |
| tid, inst->seqNum, inst->pcState()); |
| } |
| |
| if (inst->isSquashed()) { |
| DPRINTF(Rename, |
| "[tid:%i] " |
| "instruction %i with PC %s is squashed, skipping.\n", |
| tid, inst->seqNum, inst->pcState()); |
| |
| ++stats.squashedInsts; |
| |
| // Decrement how many instructions are available. |
| --insts_available; |
| |
| continue; |
| } |
| |
| DPRINTF(Rename, |
| "[tid:%i] " |
| "Processing instruction [sn:%llu] with PC %s.\n", |
| tid, inst->seqNum, inst->pcState()); |
| |
| // Check here to make sure there are enough destination registers |
| // to rename to. Otherwise block. |
| if (!renameMap[tid]->canRename(inst->numIntDestRegs(), |
| inst->numFPDestRegs(), |
| inst->numVecDestRegs(), |
| inst->numVecElemDestRegs(), |
| inst->numVecPredDestRegs(), |
| inst->numCCDestRegs())) { |
| DPRINTF(Rename, |
| "Blocking due to " |
| " lack of free physical registers to rename to.\n"); |
| blockThisCycle = true; |
| insts_to_rename.push_front(inst); |
| ++stats.fullRegistersEvents; |
| |
| break; |
| } |
| |
| // Handle serializeAfter/serializeBefore instructions. |
| // serializeAfter marks the next instruction as serializeBefore. |
| // serializeBefore makes the instruction wait in rename until the ROB |
| // is empty. |
| |
| // In this model, IPR accesses are serialize before |
| // instructions, and store conditionals are serialize after |
| // instructions. This is mainly due to lack of support for |
| // out-of-order operations of either of those classes of |
| // instructions. |
| if (inst->isSerializeBefore() && !inst->isSerializeHandled()) { |
| DPRINTF(Rename, "Serialize before instruction encountered.\n"); |
| |
| if (!inst->isTempSerializeBefore()) { |
| stats.serializing++; |
| inst->setSerializeHandled(); |
| } else { |
| stats.tempSerializing++; |
| } |
| |
| // Change status over to SerializeStall so that other stages know |
| // what this is blocked on. |
| renameStatus[tid] = SerializeStall; |
| |
| serializeInst[tid] = inst; |
| |
| blockThisCycle = true; |
| |
| break; |
| } else if ((inst->isStoreConditional() || inst->isSerializeAfter()) && |
| !inst->isSerializeHandled()) { |
| DPRINTF(Rename, "Serialize after instruction encountered.\n"); |
| |
| stats.serializing++; |
| |
| inst->setSerializeHandled(); |
| |
| serializeAfter(insts_to_rename, tid); |
| } |
| |
| renameSrcRegs(inst, inst->threadNumber); |
| |
| renameDestRegs(inst, inst->threadNumber); |
| |
| if (inst->isAtomic() || inst->isStore()) { |
| storesInProgress[tid]++; |
| } else if (inst->isLoad()) { |
| loadsInProgress[tid]++; |
| } |
| |
| ++renamed_insts; |
| // Notify potential listeners that source and destination registers for |
| // this instruction have been renamed. |
| ppRename->notify(inst); |
| |
| // Put instruction in rename queue. |
| toIEW->insts[toIEWIndex] = inst; |
| ++(toIEW->size); |
| |
| // Increment which instruction we're on. |
| ++toIEWIndex; |
| |
| // Decrement how many instructions are available. |
| --insts_available; |
| } |
| |
| instsInProgress[tid] += renamed_insts; |
| stats.renamedInsts += renamed_insts; |
| |
| // If we wrote to the time buffer, record this. |
| if (toIEWIndex) { |
| wroteToTimeBuffer = true; |
| } |
| |
| // Check if there's any instructions left that haven't yet been renamed. |
| // If so then block. |
| if (insts_available) { |
| blockThisCycle = true; |
| } |
| |
| if (blockThisCycle) { |
| block(tid); |
| toDecode->renameUnblock[tid] = false; |
| } |
| } |
| |
| template<class Impl> |
| void |
| DefaultRename<Impl>::skidInsert(ThreadID tid) |
| { |
| DynInstPtr inst = NULL; |
| |
| while (!insts[tid].empty()) { |
| inst = insts[tid].front(); |
| |
| insts[tid].pop_front(); |
| |
| assert(tid == inst->threadNumber); |
| |
| DPRINTF(Rename, "[tid:%i] Inserting [sn:%llu] PC: %s into Rename " |
| "skidBuffer\n", tid, inst->seqNum, inst->pcState()); |
| |
| ++stats.skidInsts; |
| |
| skidBuffer[tid].push_back(inst); |
| } |
| |
| if (skidBuffer[tid].size() > skidBufferMax) |
| { |
| typename InstQueue::iterator it; |
| warn("Skidbuffer contents:\n"); |
| for (it = skidBuffer[tid].begin(); it != skidBuffer[tid].end(); it++) |
| { |
| warn("[tid:%i] %s [sn:%llu].\n", tid, |
| (*it)->staticInst->disassemble(inst->instAddr()), |
| (*it)->seqNum); |
| } |
| panic("Skidbuffer Exceeded Max Size"); |
| } |
| } |
| |
| template <class Impl> |
| void |
| DefaultRename<Impl>::sortInsts() |
| { |
| int insts_from_decode = fromDecode->size; |
| for (int i = 0; i < insts_from_decode; ++i) { |
| const DynInstPtr &inst = fromDecode->insts[i]; |
| insts[inst->threadNumber].push_back(inst); |
| #if TRACING_ON |
| if (DTRACE(O3PipeView)) { |
| inst->renameTick = curTick() - inst->fetchTick; |
| } |
| #endif |
| } |
| } |
| |
| template<class Impl> |
| bool |
| DefaultRename<Impl>::skidsEmpty() |
| { |
| std::list<ThreadID>::iterator threads = activeThreads->begin(); |
| std::list<ThreadID>::iterator end = activeThreads->end(); |
| |
| while (threads != end) { |
| ThreadID tid = *threads++; |
| |
| if (!skidBuffer[tid].empty()) |
| return false; |
| } |
| |
| return true; |
| } |
| |
| template<class Impl> |
| void |
| DefaultRename<Impl>::updateStatus() |
| { |
| bool any_unblocking = false; |
| |
| std::list<ThreadID>::iterator threads = activeThreads->begin(); |
| std::list<ThreadID>::iterator end = activeThreads->end(); |
| |
| while (threads != end) { |
| ThreadID tid = *threads++; |
| |
| if (renameStatus[tid] == Unblocking) { |
| any_unblocking = true; |
| break; |
| } |
| } |
| |
| // Rename will have activity if it's unblocking. |
| if (any_unblocking) { |
| if (_status == Inactive) { |
| _status = Active; |
| |
| DPRINTF(Activity, "Activating stage.\n"); |
| |
| cpu->activateStage(O3CPU::RenameIdx); |
| } |
| } else { |
| // If it's not unblocking, then rename will not have any internal |
| // activity. Switch it to inactive. |
| if (_status == Active) { |
| _status = Inactive; |
| DPRINTF(Activity, "Deactivating stage.\n"); |
| |
| cpu->deactivateStage(O3CPU::RenameIdx); |
| } |
| } |
| } |
| |
| template <class Impl> |
| bool |
| DefaultRename<Impl>::block(ThreadID tid) |
| { |
| DPRINTF(Rename, "[tid:%i] Blocking.\n", tid); |
| |
| // Add the current inputs onto the skid buffer, so they can be |
| // reprocessed when this stage unblocks. |
| skidInsert(tid); |
| |
| // Only signal backwards to block if the previous stages do not think |
| // rename is already blocked. |
| if (renameStatus[tid] != Blocked) { |
| // If resumeUnblocking is set, we unblocked during the squash, |
| // but now we're have unblocking status. We need to tell earlier |
| // stages to block. |
| if (resumeUnblocking || renameStatus[tid] != Unblocking) { |
| toDecode->renameBlock[tid] = true; |
| toDecode->renameUnblock[tid] = false; |
| wroteToTimeBuffer = true; |
| } |
| |
| // Rename can not go from SerializeStall to Blocked, otherwise |
| // it would not know to complete the serialize stall. |
| if (renameStatus[tid] != SerializeStall) { |
| // Set status to Blocked. |
| renameStatus[tid] = Blocked; |
| return true; |
| } |
| } |
| |
| return false; |
| } |
| |
| template <class Impl> |
| bool |
| DefaultRename<Impl>::unblock(ThreadID tid) |
| { |
| DPRINTF(Rename, "[tid:%i] Trying to unblock.\n", tid); |
| |
| // Rename is done unblocking if the skid buffer is empty. |
| if (skidBuffer[tid].empty() && renameStatus[tid] != SerializeStall) { |
| |
| DPRINTF(Rename, "[tid:%i] Done unblocking.\n", tid); |
| |
| toDecode->renameUnblock[tid] = true; |
| wroteToTimeBuffer = true; |
| |
| renameStatus[tid] = Running; |
| return true; |
| } |
| |
| return false; |
| } |
| |
| template <class Impl> |
| void |
| DefaultRename<Impl>::doSquash(const InstSeqNum &squashed_seq_num, ThreadID tid) |
| { |
| typename std::list<RenameHistory>::iterator hb_it = |
| historyBuffer[tid].begin(); |
| |
| // After a syscall squashes everything, the history buffer may be empty |
| // but the ROB may still be squashing instructions. |
| // Go through the most recent instructions, undoing the mappings |
| // they did and freeing up the registers. |
| while (!historyBuffer[tid].empty() && |
| hb_it->instSeqNum > squashed_seq_num) { |
| assert(hb_it != historyBuffer[tid].end()); |
| |
| DPRINTF(Rename, "[tid:%i] Removing history entry with sequence " |
| "number %i (archReg: %d, newPhysReg: %d, prevPhysReg: %d).\n", |
| tid, hb_it->instSeqNum, hb_it->archReg.index(), |
| hb_it->newPhysReg->index(), hb_it->prevPhysReg->index()); |
| |
| // Undo the rename mapping only if it was really a change. |
| // Special regs that are not really renamed (like misc regs |
| // and the zero reg) can be recognized because the new mapping |
| // is the same as the old one. While it would be merely a |
| // waste of time to update the rename table, we definitely |
| // don't want to put these on the free list. |
| if (hb_it->newPhysReg != hb_it->prevPhysReg) { |
| // Tell the rename map to set the architected register to the |
| // previous physical register that it was renamed to. |
| renameMap[tid]->setEntry(hb_it->archReg, hb_it->prevPhysReg); |
| |
| // Put the renamed physical register back on the free list. |
| freeList->addReg(hb_it->newPhysReg); |
| } |
| |
| // Notify potential listeners that the register mapping needs to be |
| // removed because the instruction it was mapped to got squashed. Note |
| // that this is done before hb_it is incremented. |
| ppSquashInRename->notify(std::make_pair(hb_it->instSeqNum, |
| hb_it->newPhysReg)); |
| |
| historyBuffer[tid].erase(hb_it++); |
| |
| ++stats.undoneMaps; |
| } |
| |
| // Check if we need to change vector renaming mode after squashing |
| cpu->switchRenameMode(tid, freeList); |
| } |
| |
| template<class Impl> |
| void |
| DefaultRename<Impl>::removeFromHistory(InstSeqNum inst_seq_num, ThreadID tid) |
| { |
| DPRINTF(Rename, "[tid:%i] Removing a committed instruction from the " |
| "history buffer %u (size=%i), until [sn:%llu].\n", |
| tid, tid, historyBuffer[tid].size(), inst_seq_num); |
| |
| typename std::list<RenameHistory>::iterator hb_it = |
| historyBuffer[tid].end(); |
| |
| --hb_it; |
| |
| if (historyBuffer[tid].empty()) { |
| DPRINTF(Rename, "[tid:%i] History buffer is empty.\n", tid); |
| return; |
| } else if (hb_it->instSeqNum > inst_seq_num) { |
| DPRINTF(Rename, "[tid:%i] [sn:%llu] " |
| "Old sequence number encountered. " |
| "Ensure that a syscall happened recently.\n", |
| tid,inst_seq_num); |
| return; |
| } |
| |
| // Commit all the renames up until (and including) the committed sequence |
| // number. Some or even all of the committed instructions may not have |
| // rename histories if they did not have destination registers that were |
| // renamed. |
| while (!historyBuffer[tid].empty() && |
| hb_it != historyBuffer[tid].end() && |
| hb_it->instSeqNum <= inst_seq_num) { |
| |
| DPRINTF(Rename, "[tid:%i] Freeing up older rename of reg %i (%s), " |
| "[sn:%llu].\n", |
| tid, hb_it->prevPhysReg->index(), |
| hb_it->prevPhysReg->className(), |
| hb_it->instSeqNum); |
| |
| // Don't free special phys regs like misc and zero regs, which |
| // can be recognized because the new mapping is the same as |
| // the old one. |
| if (hb_it->newPhysReg != hb_it->prevPhysReg) { |
| freeList->addReg(hb_it->prevPhysReg); |
| } |
| |
| ++stats.committedMaps; |
| |
| historyBuffer[tid].erase(hb_it--); |
| } |
| } |
| |
| template <class Impl> |
| inline void |
| DefaultRename<Impl>::renameSrcRegs(const DynInstPtr &inst, ThreadID tid) |
| { |
| ThreadContext *tc = inst->tcBase(); |
| RenameMap *map = renameMap[tid]; |
| unsigned num_src_regs = inst->numSrcRegs(); |
| |
| // Get the architectual register numbers from the source and |
| // operands, and redirect them to the right physical register. |
| for (int src_idx = 0; src_idx < num_src_regs; src_idx++) { |
| const RegId& src_reg = inst->srcRegIdx(src_idx); |
| PhysRegIdPtr renamed_reg; |
| |
| renamed_reg = map->lookup(tc->flattenRegId(src_reg)); |
| switch (src_reg.classValue()) { |
| case IntRegClass: |
| stats.intLookups++; |
| break; |
| case FloatRegClass: |
| stats.fpLookups++; |
| break; |
| case VecRegClass: |
| case VecElemClass: |
| stats.vecLookups++; |
| break; |
| case VecPredRegClass: |
| stats.vecPredLookups++; |
| break; |
| case CCRegClass: |
| case MiscRegClass: |
| break; |
| |
| default: |
| panic("Invalid register class: %d.", src_reg.classValue()); |
| } |
| |
| DPRINTF(Rename, |
| "[tid:%i] " |
| "Looking up %s arch reg %i, got phys reg %i (%s)\n", |
| tid, src_reg.className(), |
| src_reg.index(), renamed_reg->index(), |
| renamed_reg->className()); |
| |
| inst->renameSrcReg(src_idx, renamed_reg); |
| |
| // See if the register is ready or not. |
| if (scoreboard->getReg(renamed_reg)) { |
| DPRINTF(Rename, |
| "[tid:%i] " |
| "Register %d (flat: %d) (%s) is ready.\n", |
| tid, renamed_reg->index(), renamed_reg->flatIndex(), |
| renamed_reg->className()); |
| |
| inst->markSrcRegReady(src_idx); |
| } else { |
| DPRINTF(Rename, |
| "[tid:%i] " |
| "Register %d (flat: %d) (%s) is not ready.\n", |
| tid, renamed_reg->index(), renamed_reg->flatIndex(), |
| renamed_reg->className()); |
| } |
| |
| ++stats.lookups; |
| } |
| } |
| |
| template <class Impl> |
| inline void |
| DefaultRename<Impl>::renameDestRegs(const DynInstPtr &inst, ThreadID tid) |
| { |
| ThreadContext *tc = inst->tcBase(); |
| RenameMap *map = renameMap[tid]; |
| unsigned num_dest_regs = inst->numDestRegs(); |
| |
| // Rename the destination registers. |
| for (int dest_idx = 0; dest_idx < num_dest_regs; dest_idx++) { |
| const RegId& dest_reg = inst->destRegIdx(dest_idx); |
| typename RenameMap::RenameInfo rename_result; |
| |
| RegId flat_dest_regid = tc->flattenRegId(dest_reg); |
| flat_dest_regid.setNumPinnedWrites(dest_reg.getNumPinnedWrites()); |
| |
| rename_result = map->rename(flat_dest_regid); |
| |
| inst->regs.flattenedDestIdx(dest_idx, flat_dest_regid); |
| |
| scoreboard->unsetReg(rename_result.first); |
| |
| DPRINTF(Rename, |
| "[tid:%i] " |
| "Renaming arch reg %i (%s) to physical reg %i (%i).\n", |
| tid, dest_reg.index(), dest_reg.className(), |
| rename_result.first->index(), |
| rename_result.first->flatIndex()); |
| |
| // Record the rename information so that a history can be kept. |
| RenameHistory hb_entry(inst->seqNum, flat_dest_regid, |
| rename_result.first, |
| rename_result.second); |
| |
| historyBuffer[tid].push_front(hb_entry); |
| |
| DPRINTF(Rename, "[tid:%i] [sn:%llu] " |
| "Adding instruction to history buffer (size=%i).\n", |
| tid,(*historyBuffer[tid].begin()).instSeqNum, |
| historyBuffer[tid].size()); |
| |
| // Tell the instruction to rename the appropriate destination |
| // register (dest_idx) to the new physical register |
| // (rename_result.first), and record the previous physical |
| // register that the same logical register was renamed to |
| // (rename_result.second). |
| inst->renameDestReg(dest_idx, |
| rename_result.first, |
| rename_result.second); |
| |
| ++stats.renamedOperands; |
| } |
| } |
| |
| template <class Impl> |
| inline int |
| DefaultRename<Impl>::calcFreeROBEntries(ThreadID tid) |
| { |
| int num_free = freeEntries[tid].robEntries - |
| (instsInProgress[tid] - fromIEW->iewInfo[tid].dispatched); |
| |
| //DPRINTF(Rename,"[tid:%i] %i rob free\n",tid,num_free); |
| |
| return num_free; |
| } |
| |
| template <class Impl> |
| inline int |
| DefaultRename<Impl>::calcFreeIQEntries(ThreadID tid) |
| { |
| int num_free = freeEntries[tid].iqEntries - |
| (instsInProgress[tid] - fromIEW->iewInfo[tid].dispatched); |
| |
| //DPRINTF(Rename,"[tid:%i] %i iq free\n",tid,num_free); |
| |
| return num_free; |
| } |
| |
| template <class Impl> |
| inline int |
| DefaultRename<Impl>::calcFreeLQEntries(ThreadID tid) |
| { |
| int num_free = freeEntries[tid].lqEntries - |
| (loadsInProgress[tid] - fromIEW->iewInfo[tid].dispatchedToLQ); |
| DPRINTF(Rename, |
| "calcFreeLQEntries: free lqEntries: %d, loadsInProgress: %d, " |
| "loads dispatchedToLQ: %d\n", |
| freeEntries[tid].lqEntries, loadsInProgress[tid], |
| fromIEW->iewInfo[tid].dispatchedToLQ); |
| return num_free; |
| } |
| |
| template <class Impl> |
| inline int |
| DefaultRename<Impl>::calcFreeSQEntries(ThreadID tid) |
| { |
| int num_free = freeEntries[tid].sqEntries - |
| (storesInProgress[tid] - fromIEW->iewInfo[tid].dispatchedToSQ); |
| DPRINTF(Rename, "calcFreeSQEntries: free sqEntries: %d, storesInProgress: %d, " |
| "stores dispatchedToSQ: %d\n", freeEntries[tid].sqEntries, |
| storesInProgress[tid], fromIEW->iewInfo[tid].dispatchedToSQ); |
| return num_free; |
| } |
| |
| template <class Impl> |
| unsigned |
| DefaultRename<Impl>::validInsts() |
| { |
| unsigned inst_count = 0; |
| |
| for (int i=0; i<fromDecode->size; i++) { |
| if (!fromDecode->insts[i]->isSquashed()) |
| inst_count++; |
| } |
| |
| return inst_count; |
| } |
| |
| template <class Impl> |
| void |
| DefaultRename<Impl>::readStallSignals(ThreadID tid) |
| { |
| if (fromIEW->iewBlock[tid]) { |
| stalls[tid].iew = true; |
| } |
| |
| if (fromIEW->iewUnblock[tid]) { |
| assert(stalls[tid].iew); |
| stalls[tid].iew = false; |
| } |
| } |
| |
| template <class Impl> |
| bool |
| DefaultRename<Impl>::checkStall(ThreadID tid) |
| { |
| bool ret_val = false; |
| |
| if (stalls[tid].iew) { |
| DPRINTF(Rename,"[tid:%i] Stall from IEW stage detected.\n", tid); |
| ret_val = true; |
| } else if (calcFreeROBEntries(tid) <= 0) { |
| DPRINTF(Rename,"[tid:%i] Stall: ROB has 0 free entries.\n", tid); |
| ret_val = true; |
| } else if (calcFreeIQEntries(tid) <= 0) { |
| DPRINTF(Rename,"[tid:%i] Stall: IQ has 0 free entries.\n", tid); |
| ret_val = true; |
| } else if (calcFreeLQEntries(tid) <= 0 && calcFreeSQEntries(tid) <= 0) { |
| DPRINTF(Rename,"[tid:%i] Stall: LSQ has 0 free entries.\n", tid); |
| ret_val = true; |
| } else if (renameMap[tid]->numFreeEntries() <= 0) { |
| DPRINTF(Rename,"[tid:%i] Stall: RenameMap has 0 free entries.\n", tid); |
| ret_val = true; |
| } else if (renameStatus[tid] == SerializeStall && |
| (!emptyROB[tid] || instsInProgress[tid])) { |
| DPRINTF(Rename,"[tid:%i] Stall: Serialize stall and ROB is not " |
| "empty.\n", |
| tid); |
| ret_val = true; |
| } |
| |
| return ret_val; |
| } |
| |
| template <class Impl> |
| void |
| DefaultRename<Impl>::readFreeEntries(ThreadID tid) |
| { |
| if (fromIEW->iewInfo[tid].usedIQ) |
| freeEntries[tid].iqEntries = fromIEW->iewInfo[tid].freeIQEntries; |
| |
| if (fromIEW->iewInfo[tid].usedLSQ) { |
| freeEntries[tid].lqEntries = fromIEW->iewInfo[tid].freeLQEntries; |
| freeEntries[tid].sqEntries = fromIEW->iewInfo[tid].freeSQEntries; |
| } |
| |
| if (fromCommit->commitInfo[tid].usedROB) { |
| freeEntries[tid].robEntries = |
| fromCommit->commitInfo[tid].freeROBEntries; |
| emptyROB[tid] = fromCommit->commitInfo[tid].emptyROB; |
| } |
| |
| DPRINTF(Rename, "[tid:%i] Free IQ: %i, Free ROB: %i, " |
| "Free LQ: %i, Free SQ: %i, FreeRM %i(%i %i %i %i %i)\n", |
| tid, |
| freeEntries[tid].iqEntries, |
| freeEntries[tid].robEntries, |
| freeEntries[tid].lqEntries, |
| freeEntries[tid].sqEntries, |
| renameMap[tid]->numFreeEntries(), |
| renameMap[tid]->numFreeIntEntries(), |
| renameMap[tid]->numFreeFloatEntries(), |
| renameMap[tid]->numFreeVecEntries(), |
| renameMap[tid]->numFreePredEntries(), |
| renameMap[tid]->numFreeCCEntries()); |
| |
| DPRINTF(Rename, "[tid:%i] %i instructions not yet in ROB\n", |
| tid, instsInProgress[tid]); |
| } |
| |
| template <class Impl> |
| bool |
| DefaultRename<Impl>::checkSignalsAndUpdate(ThreadID tid) |
| { |
| // Check if there's a squash signal, squash if there is |
| // Check stall signals, block if necessary. |
| // If status was blocked |
| // check if stall conditions have passed |
| // if so then go to unblocking |
| // If status was Squashing |
| // check if squashing is not high. Switch to running this cycle. |
| // If status was serialize stall |
| // check if ROB is empty and no insts are in flight to the ROB |
| |
| readFreeEntries(tid); |
| readStallSignals(tid); |
| |
| if (fromCommit->commitInfo[tid].squash) { |
| DPRINTF(Rename, "[tid:%i] Squashing instructions due to squash from " |
| "commit.\n", tid); |
| |
| squash(fromCommit->commitInfo[tid].doneSeqNum, tid); |
| |
| return true; |
| } |
| |
| if (checkStall(tid)) { |
| return block(tid); |
| } |
| |
| if (renameStatus[tid] == Blocked) { |
| DPRINTF(Rename, "[tid:%i] Done blocking, switching to unblocking.\n", |
| tid); |
| |
| renameStatus[tid] = Unblocking; |
| |
| unblock(tid); |
| |
| return true; |
| } |
| |
| if (renameStatus[tid] == Squashing) { |
| // Switch status to running if rename isn't being told to block or |
| // squash this cycle. |
| if (resumeSerialize) { |
| DPRINTF(Rename, |
| "[tid:%i] Done squashing, switching to serialize.\n", tid); |
| |
| renameStatus[tid] = SerializeStall; |
| return true; |
| } else if (resumeUnblocking) { |
| DPRINTF(Rename, |
| "[tid:%i] Done squashing, switching to unblocking.\n", |
| tid); |
| renameStatus[tid] = Unblocking; |
| return true; |
| } else { |
| DPRINTF(Rename, "[tid:%i] Done squashing, switching to running.\n", |
| tid); |
| renameStatus[tid] = Running; |
| return false; |
| } |
| } |
| |
| if (renameStatus[tid] == SerializeStall) { |
| // Stall ends once the ROB is free. |
| DPRINTF(Rename, "[tid:%i] Done with serialize stall, switching to " |
| "unblocking.\n", tid); |
| |
| DynInstPtr serial_inst = serializeInst[tid]; |
| |
| renameStatus[tid] = Unblocking; |
| |
| unblock(tid); |
| |
| DPRINTF(Rename, "[tid:%i] Processing instruction [%lli] with " |
| "PC %s.\n", tid, serial_inst->seqNum, serial_inst->pcState()); |
| |
| // Put instruction into queue here. |
| serial_inst->clearSerializeBefore(); |
| |
| if (!skidBuffer[tid].empty()) { |
| skidBuffer[tid].push_front(serial_inst); |
| } else { |
| insts[tid].push_front(serial_inst); |
| } |
| |
| DPRINTF(Rename, "[tid:%i] Instruction must be processed by rename." |
| " Adding to front of list.\n", tid); |
| |
| serializeInst[tid] = NULL; |
| |
| return true; |
| } |
| |
| // If we've reached this point, we have not gotten any signals that |
| // cause rename to change its status. Rename remains the same as before. |
| return false; |
| } |
| |
| template<class Impl> |
| void |
| DefaultRename<Impl>::serializeAfter(InstQueue &inst_list, ThreadID tid) |
| { |
| if (inst_list.empty()) { |
| // Mark a bit to say that I must serialize on the next instruction. |
| serializeOnNextInst[tid] = true; |
| return; |
| } |
| |
| // Set the next instruction as serializing. |
| inst_list.front()->setSerializeBefore(); |
| } |
| |
| template <class Impl> |
| inline void |
| DefaultRename<Impl>::incrFullStat(const FullSource &source) |
| { |
| switch (source) { |
| case ROB: |
| ++stats.ROBFullEvents; |
| break; |
| case IQ: |
| ++stats.IQFullEvents; |
| break; |
| case LQ: |
| ++stats.LQFullEvents; |
| break; |
| case SQ: |
| ++stats.SQFullEvents; |
| break; |
| default: |
| panic("Rename full stall stat should be incremented for a reason!"); |
| break; |
| } |
| } |
| |
| template <class Impl> |
| void |
| DefaultRename<Impl>::dumpHistory() |
| { |
| typename std::list<RenameHistory>::iterator buf_it; |
| |
| for (ThreadID tid = 0; tid < numThreads; tid++) { |
| |
| buf_it = historyBuffer[tid].begin(); |
| |
| while (buf_it != historyBuffer[tid].end()) { |
| cprintf("Seq num: %i\nArch reg[%s]: %i New phys reg:" |
| " %i[%s] Old phys reg: %i[%s]\n", |
| (*buf_it).instSeqNum, |
| (*buf_it).archReg.className(), |
| (*buf_it).archReg.index(), |
| (*buf_it).newPhysReg->index(), |
| (*buf_it).newPhysReg->className(), |
| (*buf_it).prevPhysReg->index(), |
| (*buf_it).prevPhysReg->className()); |
| |
| buf_it++; |
| } |
| } |
| } |
| |
| #endif//__CPU_O3_RENAME_IMPL_HH__ |