blob: 4ea0626544090f267fda7bfd23c319a26fd71f9f [file] [log] [blame]
/*
* Copyright (c) 2012-2013, 2015, 2017 ARM Limited
* All rights reserved.
*
* The license below extends only to copyright in the software and shall
* not be construed as granting a license to any other intellectual
* property including but not limited to intellectual property relating
* to a hardware implementation of the functionality of the software
* licensed hereunder. You may use the software subject to the license
* terms below provided that you ensure that this notice is replicated
* unmodified and in its entirety in all distributions of the software,
* modified or unmodified, in source code or in binary form.
*
* Copyright (c) 2004-2005 The Regents of The University of Michigan
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are
* met: redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer;
* redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution;
* neither the name of the copyright holders nor the names of its
* contributors may be used to endorse or promote products derived from
* this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* Authors: Ali Saidi
* Nathan Binkert
* Andreas Sandberg
*/
#ifndef __DEV_DMA_DEVICE_HH__
#define __DEV_DMA_DEVICE_HH__
#include <deque>
#include <memory>
#include "base/circlebuf.hh"
#include "dev/io_device.hh"
#include "params/DmaDevice.hh"
#include "sim/drain.hh"
#include "sim/system.hh"
class ClockedObject;
class DmaPort : public MasterPort, public Drainable
{
private:
/**
* Take the first packet of the transmit list and attempt to send
* it as a timing request. If it is successful, schedule the
* sending of the next packet, otherwise remember that we are
* waiting for a retry.
*/
void trySendTimingReq();
/**
* For timing, attempt to send the first item on the transmit
* list, and if it is successful and there are more packets
* waiting, then schedule the sending of the next packet. For
* atomic, simply send and process everything on the transmit
* list.
*/
void sendDma();
/**
* Handle a response packet by updating the corresponding DMA
* request state to reflect the bytes received, and also update
* the pending request counter. If the DMA request that this
* packet is part of is complete, then signal the completion event
* if present, potentially with a delay added to it.
*
* @param pkt Response packet to handler
* @param delay Additional delay for scheduling the completion event
*/
void handleResp(PacketPtr pkt, Tick delay = 0);
struct DmaReqState : public Packet::SenderState
{
/** Event to call on the device when this transaction (all packets)
* complete. */
Event *completionEvent;
/** Total number of bytes that this transaction involves. */
const Addr totBytes;
/** Number of bytes that have been acked for this transaction. */
Addr numBytes;
/** Amount to delay completion of dma by */
const Tick delay;
DmaReqState(Event *ce, Addr tb, Tick _delay)
: completionEvent(ce), totBytes(tb), numBytes(0), delay(_delay)
{}
};
public:
/** The device that owns this port. */
ClockedObject *const device;
/** The system that device/port are in. This is used to select which mode
* we are currently operating in. */
System *const sys;
/** Id for all requests */
const MasterID masterId;
protected:
/** Use a deque as we never do any insertion or removal in the middle */
std::deque<PacketPtr> transmitList;
/** Event used to schedule a future sending from the transmit list. */
EventFunctionWrapper sendEvent;
/** Number of outstanding packets the dma port has. */
uint32_t pendingCount;
/** If the port is currently waiting for a retry before it can
* send whatever it is that it's sending. */
bool inRetry;
protected:
bool recvTimingResp(PacketPtr pkt) override;
void recvReqRetry() override;
void queueDma(PacketPtr pkt);
public:
DmaPort(ClockedObject *dev, System *s);
RequestPtr dmaAction(Packet::Command cmd, Addr addr, int size, Event *event,
uint8_t *data, Tick delay, Request::Flags flag = 0);
bool dmaPending() const { return pendingCount > 0; }
DrainState drain() override;
};
class DmaDevice : public PioDevice
{
protected:
DmaPort dmaPort;
public:
typedef DmaDeviceParams Params;
DmaDevice(const Params *p);
virtual ~DmaDevice() { }
void dmaWrite(Addr addr, int size, Event *event, uint8_t *data,
Tick delay = 0)
{
dmaPort.dmaAction(MemCmd::WriteReq, addr, size, event, data, delay);
}
void dmaRead(Addr addr, int size, Event *event, uint8_t *data,
Tick delay = 0)
{
dmaPort.dmaAction(MemCmd::ReadReq, addr, size, event, data, delay);
}
bool dmaPending() const { return dmaPort.dmaPending(); }
void init() override;
unsigned int cacheBlockSize() const { return sys->cacheLineSize(); }
Port &getPort(const std::string &if_name,
PortID idx=InvalidPortID) override;
};
/**
* DMA callback class.
*
* Allows one to register for a callback event after a sequence of (potentially
* non-contiguous) DMA transfers on a DmaPort completes. Derived classes must
* implement the process() method and use getChunkEvent() to allocate a
* callback event for each participating DMA.
*/
class DmaCallback : public Drainable
{
public:
virtual const std::string name() const { return "DmaCallback"; }
/**
* DmaPort ensures that all oustanding DMA accesses have completed before
* it finishes draining. However, DmaChunkEvents scheduled with a delay
* might still be sitting on the event queue. Therefore, draining is not
* complete until count is 0, which ensures that all outstanding
* DmaChunkEvents associated with this DmaCallback have fired.
*/
DrainState drain() override
{
return count ? DrainState::Draining : DrainState::Drained;
}
protected:
int count;
DmaCallback()
: count(0)
{ }
virtual ~DmaCallback() { }
/**
* Callback function invoked on completion of all chunks.
*/
virtual void process() = 0;
private:
/**
* Called by DMA engine completion event on each chunk completion.
* Since the object may delete itself here, callers should not use
* the object pointer after calling this function.
*/
void chunkComplete()
{
if (--count == 0) {
process();
// Need to notify DrainManager that this object is finished
// draining, even though it is immediately deleted.
signalDrainDone();
delete this;
}
}
public:
/**
* Request a chunk event. Chunks events should be provided to each DMA
* request that wishes to participate in this DmaCallback.
*/
Event *getChunkEvent()
{
++count;
return new EventFunctionWrapper([this]{ chunkComplete(); }, name(),
true);
}
};
/**
* Buffered DMA engine helper class
*
* This class implements a simple DMA engine that feeds a FIFO
* buffer. The size of the buffer, the maximum number of pending
* requests and the maximum request size are all set when the engine
* is instantiated.
*
* An <i>asynchronous</i> transfer of a <i>block</i> of data
* (designated by a start address and a size) is started by calling
* the startFill() method. The DMA engine will aggressively try to
* keep the internal FIFO full. As soon as there is room in the FIFO
* for more data <i>and</i> there are free request slots, a new fill
* will be started.
*
* Data in the FIFO can be read back using the get() and tryGet()
* methods. Both request a block of data from the FIFO. However, get()
* panics if the block cannot be satisfied, while tryGet() simply
* returns false. The latter call makes it possible to implement
* custom buffer underrun handling.
*
* A simple use case would be something like this:
* \code{.cpp}
* // Create a DMA engine with a 1KiB buffer. Issue up to 8 concurrent
* // uncacheable 64 byte (maximum) requests.
* DmaReadFifo *dma = new DmaReadFifo(port, 1024, 64, 8,
* Request::UNCACHEABLE);
*
* // Start copying 4KiB data from 0xFF000000
* dma->startFill(0xFF000000, 0x1000);
*
* // Some time later when there is data in the FIFO.
* uint8_t data[8];
* dma->get(data, sizeof(data))
* \endcode
*
*
* The DMA engine allows new blocks to be requested as soon as the
* last request for a block has been sent (i.e., there is no need to
* wait for pending requests to complete). This can be queried with
* the atEndOfBlock() method and more advanced implementations may
* override the onEndOfBlock() callback.
*/
class DmaReadFifo : public Drainable, public Serializable
{
public:
DmaReadFifo(DmaPort &port, size_t size,
unsigned max_req_size,
unsigned max_pending,
Request::Flags flags = 0);
~DmaReadFifo();
public: // Serializable
void serialize(CheckpointOut &cp) const override;
void unserialize(CheckpointIn &cp) override;
public: // Drainable
DrainState drain() override;
public: // FIFO access
/**
* @{
* @name FIFO access
*/
/**
* Try to read data from the FIFO.
*
* This method reads len bytes of data from the FIFO and stores
* them in the memory location pointed to by dst. The method
* fails, and no data is written to the buffer, if the FIFO
* doesn't contain enough data to satisfy the request.
*
* @param dst Pointer to a destination buffer
* @param len Amount of data to read.
* @return true on success, false otherwise.
*/
bool tryGet(uint8_t *dst, size_t len);
template<typename T>
bool tryGet(T &value) {
return tryGet(static_cast<T *>(&value), sizeof(T));
};
/**
* Read data from the FIFO and panic on failure.
*
* @see tryGet()
*
* @param dst Pointer to a destination buffer
* @param len Amount of data to read.
*/
void get(uint8_t *dst, size_t len);
template<typename T>
T get() {
T value;
get(static_cast<uint8_t *>(&value), sizeof(T));
return value;
};
/** Get the amount of data stored in the FIFO */
size_t size() const { return buffer.size(); }
/** Flush the FIFO */
void flush() { buffer.flush(); }
/** @} */
public: // FIFO fill control
/**
* @{
* @name FIFO fill control
*/
/**
* Start filling the FIFO.
*
* @warn It's considered an error to call start on an active DMA
* engine unless the last request from the active block has been
* sent (i.e., atEndOfBlock() is true).
*
* @param start Physical address to copy from.
* @param size Size of the block to copy.
*/
void startFill(Addr start, size_t size);
/**
* Stop the DMA engine.
*
* Stop filling the FIFO and ignore incoming responses for pending
* requests. The onEndOfBlock() callback will not be called after
* this method has been invoked. However, once the last response
* has been received, the onIdle() callback will still be called.
*/
void stopFill();
/**
* Has the DMA engine sent out the last request for the active
* block?
*/
bool atEndOfBlock() const {
return nextAddr == endAddr;
}
/**
* Is the DMA engine active (i.e., are there still in-flight
* accesses)?
*/
bool isActive() const {
return !(pendingRequests.empty() && atEndOfBlock());
}
/** @} */
protected: // Callbacks
/**
* @{
* @name Callbacks
*/
/**
* End of block callback
*
* This callback is called <i>once</i> after the last access in a
* block has been sent. It is legal for a derived class to call
* startFill() from this method to initiate a transfer.
*/
virtual void onEndOfBlock() {};
/**
* Last response received callback
*
* This callback is called when the DMA engine becomes idle (i.e.,
* there are no pending requests).
*
* It is possible for a DMA engine to reach the end of block and
* become idle at the same tick. In such a case, the
* onEndOfBlock() callback will be called first. This callback
* will <i>NOT</i> be called if that callback initiates a new DMA transfer.
*/
virtual void onIdle() {};
/** @} */
private: // Configuration
/** Maximum request size in bytes */
const Addr maxReqSize;
/** Maximum FIFO size in bytes */
const size_t fifoSize;
/** Request flags */
const Request::Flags reqFlags;
DmaPort &port;
private:
class DmaDoneEvent : public Event
{
public:
DmaDoneEvent(DmaReadFifo *_parent, size_t max_size);
void kill();
void cancel();
bool canceled() const { return _canceled; }
void reset(size_t size);
void process();
bool done() const { return _done; }
size_t requestSize() const { return _requestSize; }
const uint8_t *data() const { return _data.data(); }
uint8_t *data() { return _data.data(); }
private:
DmaReadFifo *parent;
bool _done;
bool _canceled;
size_t _requestSize;
std::vector<uint8_t> _data;
};
typedef std::unique_ptr<DmaDoneEvent> DmaDoneEventUPtr;
/**
* DMA request done, handle incoming data and issue new
* request.
*/
void dmaDone();
/** Handle pending requests that have been flagged as done. */
void handlePending();
/** Try to issue new DMA requests or bypass DMA requests*/
void resumeFill();
/** Try to issue new DMA requests during normal execution*/
void resumeFillTiming();
/** Try to bypass DMA requests in KVM execution mode */
void resumeFillFunctional();
private: // Internal state
Fifo<uint8_t> buffer;
Addr nextAddr;
Addr endAddr;
std::deque<DmaDoneEventUPtr> pendingRequests;
std::deque<DmaDoneEventUPtr> freeRequests;
};
#endif // __DEV_DMA_DEVICE_HH__