| /* |
| * Copyright (c) 2013-2014,2016 ARM Limited |
| * All rights reserved |
| * |
| * The license below extends only to copyright in the software and shall |
| * not be construed as granting a license to any other intellectual |
| * property including but not limited to intellectual property relating |
| * to a hardware implementation of the functionality of the software |
| * licensed hereunder. You may use the software subject to the license |
| * terms below provided that you ensure that this notice is replicated |
| * unmodified and in its entirety in all distributions of the software, |
| * modified or unmodified, in source code or in binary form. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions are |
| * met: redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer; |
| * redistributions in binary form must reproduce the above copyright |
| * notice, this list of conditions and the following disclaimer in the |
| * documentation and/or other materials provided with the distribution; |
| * neither the name of the copyright holders nor the names of its |
| * contributors may be used to endorse or promote products derived from |
| * this software without specific prior written permission. |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS |
| * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT |
| * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR |
| * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT |
| * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, |
| * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT |
| * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, |
| * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY |
| * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
| * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE |
| * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| */ |
| |
| #include "cpu/minor/fetch2.hh" |
| |
| #include <string> |
| |
| #include "arch/decoder.hh" |
| #include "arch/utility.hh" |
| #include "cpu/minor/pipeline.hh" |
| #include "cpu/pred/bpred_unit.hh" |
| #include "debug/Branch.hh" |
| #include "debug/Fetch.hh" |
| #include "debug/MinorTrace.hh" |
| |
| namespace Minor |
| { |
| |
| Fetch2::Fetch2(const std::string &name, |
| MinorCPU &cpu_, |
| MinorCPUParams ¶ms, |
| Latch<ForwardLineData>::Output inp_, |
| Latch<BranchData>::Output branchInp_, |
| Latch<BranchData>::Input predictionOut_, |
| Latch<ForwardInstData>::Input out_, |
| std::vector<InputBuffer<ForwardInstData>> &next_stage_input_buffer) : |
| Named(name), |
| cpu(cpu_), |
| inp(inp_), |
| branchInp(branchInp_), |
| predictionOut(predictionOut_), |
| out(out_), |
| nextStageReserve(next_stage_input_buffer), |
| outputWidth(params.decodeInputWidth), |
| processMoreThanOneInput(params.fetch2CycleInput), |
| branchPredictor(*params.branchPred), |
| fetchInfo(params.numThreads), |
| threadPriority(0) |
| { |
| if (outputWidth < 1) |
| fatal("%s: decodeInputWidth must be >= 1 (%d)\n", name, outputWidth); |
| |
| if (params.fetch2InputBufferSize < 1) { |
| fatal("%s: fetch2InputBufferSize must be >= 1 (%d)\n", name, |
| params.fetch2InputBufferSize); |
| } |
| |
| /* Per-thread input buffers */ |
| for (ThreadID tid = 0; tid < params.numThreads; tid++) { |
| inputBuffer.push_back( |
| InputBuffer<ForwardLineData>( |
| name + ".inputBuffer" + std::to_string(tid), "lines", |
| params.fetch2InputBufferSize)); |
| } |
| } |
| |
| const ForwardLineData * |
| Fetch2::getInput(ThreadID tid) |
| { |
| /* Get a line from the inputBuffer to work with */ |
| if (!inputBuffer[tid].empty()) { |
| return &(inputBuffer[tid].front()); |
| } else { |
| return NULL; |
| } |
| } |
| |
| void |
| Fetch2::popInput(ThreadID tid) |
| { |
| if (!inputBuffer[tid].empty()) { |
| inputBuffer[tid].front().freeLine(); |
| inputBuffer[tid].pop(); |
| } |
| |
| fetchInfo[tid].inputIndex = 0; |
| } |
| |
| void |
| Fetch2::dumpAllInput(ThreadID tid) |
| { |
| DPRINTF(Fetch, "Dumping whole input buffer\n"); |
| while (!inputBuffer[tid].empty()) |
| popInput(tid); |
| |
| fetchInfo[tid].inputIndex = 0; |
| } |
| |
| void |
| Fetch2::updateBranchPrediction(const BranchData &branch) |
| { |
| MinorDynInstPtr inst = branch.inst; |
| |
| /* Don't even consider instructions we didn't try to predict or faults */ |
| if (inst->isFault() || !inst->triedToPredict) |
| return; |
| |
| switch (branch.reason) { |
| case BranchData::NoBranch: |
| /* No data to update */ |
| break; |
| case BranchData::Interrupt: |
| /* Never try to predict interrupts */ |
| break; |
| case BranchData::SuspendThread: |
| /* Don't need to act on suspends */ |
| break; |
| case BranchData::HaltFetch: |
| /* Don't need to act on fetch wakeup */ |
| break; |
| case BranchData::BranchPrediction: |
| /* Shouldn't happen. Fetch2 is the only source of |
| * BranchPredictions */ |
| break; |
| case BranchData::UnpredictedBranch: |
| /* Unpredicted branch or barrier */ |
| DPRINTF(Branch, "Unpredicted branch seen inst: %s\n", *inst); |
| branchPredictor.squash(inst->id.fetchSeqNum, |
| branch.target, true, inst->id.threadId); |
| // Update after squashing to accomodate O3CPU |
| // using the branch prediction code. |
| branchPredictor.update(inst->id.fetchSeqNum, |
| inst->id.threadId); |
| break; |
| case BranchData::CorrectlyPredictedBranch: |
| /* Predicted taken, was taken */ |
| DPRINTF(Branch, "Branch predicted correctly inst: %s\n", *inst); |
| branchPredictor.update(inst->id.fetchSeqNum, |
| inst->id.threadId); |
| break; |
| case BranchData::BadlyPredictedBranch: |
| /* Predicted taken, not taken */ |
| DPRINTF(Branch, "Branch mis-predicted inst: %s\n", *inst); |
| branchPredictor.squash(inst->id.fetchSeqNum, |
| branch.target /* Not used */, false, inst->id.threadId); |
| // Update after squashing to accomodate O3CPU |
| // using the branch prediction code. |
| branchPredictor.update(inst->id.fetchSeqNum, |
| inst->id.threadId); |
| break; |
| case BranchData::BadlyPredictedBranchTarget: |
| /* Predicted taken, was taken but to a different target */ |
| DPRINTF(Branch, "Branch mis-predicted target inst: %s target: %s\n", |
| *inst, branch.target); |
| branchPredictor.squash(inst->id.fetchSeqNum, |
| branch.target, true, inst->id.threadId); |
| break; |
| } |
| } |
| |
| void |
| Fetch2::predictBranch(MinorDynInstPtr inst, BranchData &branch) |
| { |
| Fetch2ThreadInfo &thread = fetchInfo[inst->id.threadId]; |
| TheISA::PCState inst_pc = inst->pc; |
| |
| assert(!inst->predictedTaken); |
| |
| /* Skip non-control/sys call instructions */ |
| if (inst->staticInst->isControl() || |
| inst->staticInst->isSyscall()) |
| { |
| /* Tried to predict */ |
| inst->triedToPredict = true; |
| |
| DPRINTF(Branch, "Trying to predict for inst: %s\n", *inst); |
| |
| if (branchPredictor.predict(inst->staticInst, |
| inst->id.fetchSeqNum, inst_pc, |
| inst->id.threadId)) |
| { |
| inst->predictedTaken = true; |
| inst->predictedTarget = inst_pc; |
| branch.target = inst_pc; |
| } |
| } else { |
| DPRINTF(Branch, "Not attempting prediction for inst: %s\n", *inst); |
| } |
| |
| /* If we predict taken, set branch and update sequence numbers */ |
| if (inst->predictedTaken) { |
| /* Update the predictionSeqNum and remember the streamSeqNum that it |
| * was associated with */ |
| thread.expectedStreamSeqNum = inst->id.streamSeqNum; |
| |
| BranchData new_branch = BranchData(BranchData::BranchPrediction, |
| inst->id.threadId, |
| inst->id.streamSeqNum, thread.predictionSeqNum + 1, |
| inst->predictedTarget, inst); |
| |
| /* Mark with a new prediction number by the stream number of the |
| * instruction causing the prediction */ |
| thread.predictionSeqNum++; |
| branch = new_branch; |
| |
| DPRINTF(Branch, "Branch predicted taken inst: %s target: %s" |
| " new predictionSeqNum: %d\n", |
| *inst, inst->predictedTarget, thread.predictionSeqNum); |
| } |
| } |
| |
| void |
| Fetch2::evaluate() |
| { |
| /* Push input onto appropriate input buffer */ |
| if (!inp.outputWire->isBubble()) |
| inputBuffer[inp.outputWire->id.threadId].setTail(*inp.outputWire); |
| |
| ForwardInstData &insts_out = *out.inputWire; |
| BranchData prediction; |
| BranchData &branch_inp = *branchInp.outputWire; |
| |
| assert(insts_out.isBubble()); |
| |
| /* React to branches from Execute to update local branch prediction |
| * structures */ |
| updateBranchPrediction(branch_inp); |
| |
| /* If a branch arrives, don't try and do anything about it. Only |
| * react to your own predictions */ |
| if (branch_inp.isStreamChange()) { |
| DPRINTF(Fetch, "Dumping all input as a stream changing branch" |
| " has arrived\n"); |
| dumpAllInput(branch_inp.threadId); |
| fetchInfo[branch_inp.threadId].havePC = false; |
| } |
| |
| assert(insts_out.isBubble()); |
| /* Even when blocked, clear out input lines with the wrong |
| * prediction sequence number */ |
| for (ThreadID tid = 0; tid < cpu.numThreads; tid++) { |
| Fetch2ThreadInfo &thread = fetchInfo[tid]; |
| |
| thread.blocked = !nextStageReserve[tid].canReserve(); |
| |
| const ForwardLineData *line_in = getInput(tid); |
| |
| while (line_in && |
| thread.expectedStreamSeqNum == line_in->id.streamSeqNum && |
| thread.predictionSeqNum != line_in->id.predictionSeqNum) |
| { |
| DPRINTF(Fetch, "Discarding line %s" |
| " due to predictionSeqNum mismatch (expected: %d)\n", |
| line_in->id, thread.predictionSeqNum); |
| |
| popInput(tid); |
| fetchInfo[tid].havePC = false; |
| |
| if (processMoreThanOneInput) { |
| DPRINTF(Fetch, "Wrapping\n"); |
| line_in = getInput(tid); |
| } else { |
| line_in = NULL; |
| } |
| } |
| } |
| |
| ThreadID tid = getScheduledThread(); |
| DPRINTF(Fetch, "Scheduled Thread: %d\n", tid); |
| |
| assert(insts_out.isBubble()); |
| if (tid != InvalidThreadID) { |
| Fetch2ThreadInfo &fetch_info = fetchInfo[tid]; |
| |
| const ForwardLineData *line_in = getInput(tid); |
| |
| unsigned int output_index = 0; |
| |
| /* Pack instructions into the output while we can. This may involve |
| * using more than one input line. Note that lineWidth will be 0 |
| * for faulting lines */ |
| while (line_in && |
| (line_in->isFault() || |
| fetch_info.inputIndex < line_in->lineWidth) && /* More input */ |
| output_index < outputWidth && /* More output to fill */ |
| prediction.isBubble() /* No predicted branch */) |
| { |
| ThreadContext *thread = cpu.getContext(line_in->id.threadId); |
| TheISA::Decoder *decoder = thread->getDecoderPtr(); |
| |
| /* Discard line due to prediction sequence number being wrong but |
| * without the streamSeqNum number having changed */ |
| bool discard_line = |
| fetch_info.expectedStreamSeqNum == line_in->id.streamSeqNum && |
| fetch_info.predictionSeqNum != line_in->id.predictionSeqNum; |
| |
| /* Set the PC if the stream changes. Setting havePC to false in |
| * a previous cycle handles all other change of flow of control |
| * issues */ |
| bool set_pc = fetch_info.lastStreamSeqNum != line_in->id.streamSeqNum; |
| |
| if (!discard_line && (!fetch_info.havePC || set_pc)) { |
| /* Set the inputIndex to be the MachInst-aligned offset |
| * from lineBaseAddr of the new PC value */ |
| fetch_info.inputIndex = |
| (line_in->pc.instAddr() & BaseCPU::PCMask) - |
| line_in->lineBaseAddr; |
| DPRINTF(Fetch, "Setting new PC value: %s inputIndex: 0x%x" |
| " lineBaseAddr: 0x%x lineWidth: 0x%x\n", |
| line_in->pc, fetch_info.inputIndex, line_in->lineBaseAddr, |
| line_in->lineWidth); |
| fetch_info.pc = line_in->pc; |
| fetch_info.havePC = true; |
| decoder->reset(); |
| } |
| |
| /* The generated instruction. Leave as NULL if no instruction |
| * is to be packed into the output */ |
| MinorDynInstPtr dyn_inst = NULL; |
| |
| if (discard_line) { |
| /* Rest of line was from an older prediction in the same |
| * stream */ |
| DPRINTF(Fetch, "Discarding line %s (from inputIndex: %d)" |
| " due to predictionSeqNum mismatch (expected: %d)\n", |
| line_in->id, fetch_info.inputIndex, |
| fetch_info.predictionSeqNum); |
| } else if (line_in->isFault()) { |
| /* Pack a fault as a MinorDynInst with ->fault set */ |
| |
| /* Make a new instruction and pick up the line, stream, |
| * prediction, thread ids from the incoming line */ |
| dyn_inst = new MinorDynInst(line_in->id); |
| |
| /* Fetch and prediction sequence numbers originate here */ |
| dyn_inst->id.fetchSeqNum = fetch_info.fetchSeqNum; |
| dyn_inst->id.predictionSeqNum = fetch_info.predictionSeqNum; |
| /* To complete the set, test that exec sequence number has |
| * not been set */ |
| assert(dyn_inst->id.execSeqNum == 0); |
| |
| dyn_inst->pc = fetch_info.pc; |
| |
| /* Pack a faulting instruction but allow other |
| * instructions to be generated. (Fetch2 makes no |
| * immediate judgement about streamSeqNum) */ |
| dyn_inst->fault = line_in->fault; |
| DPRINTF(Fetch, "Fault being passed output_index: " |
| "%d: %s\n", output_index, dyn_inst->fault->name()); |
| } else { |
| uint8_t *line = line_in->line; |
| |
| /* The instruction is wholly in the line, can just |
| * assign */ |
| auto inst_word = *reinterpret_cast<TheISA::MachInst *> |
| (line + fetch_info.inputIndex); |
| |
| if (!decoder->instReady()) { |
| decoder->moreBytes(fetch_info.pc, |
| line_in->lineBaseAddr + fetch_info.inputIndex, |
| inst_word); |
| DPRINTF(Fetch, "Offering MachInst to decoder addr: 0x%x\n", |
| line_in->lineBaseAddr + fetch_info.inputIndex); |
| } |
| |
| /* Maybe make the above a loop to accomodate ISAs with |
| * instructions longer than sizeof(MachInst) */ |
| |
| if (decoder->instReady()) { |
| /* Make a new instruction and pick up the line, stream, |
| * prediction, thread ids from the incoming line */ |
| dyn_inst = new MinorDynInst(line_in->id); |
| |
| /* Fetch and prediction sequence numbers originate here */ |
| dyn_inst->id.fetchSeqNum = fetch_info.fetchSeqNum; |
| dyn_inst->id.predictionSeqNum = fetch_info.predictionSeqNum; |
| /* To complete the set, test that exec sequence number |
| * has not been set */ |
| assert(dyn_inst->id.execSeqNum == 0); |
| |
| /* Note that the decoder can update the given PC. |
| * Remember not to assign it until *after* calling |
| * decode */ |
| StaticInstPtr decoded_inst = decoder->decode(fetch_info.pc); |
| dyn_inst->staticInst = decoded_inst; |
| |
| dyn_inst->pc = fetch_info.pc; |
| DPRINTF(Fetch, "decoder inst %s\n", *dyn_inst); |
| |
| // Collect some basic inst class stats |
| if (decoded_inst->isLoad()) |
| loadInstructions++; |
| else if (decoded_inst->isStore()) |
| storeInstructions++; |
| else if (decoded_inst->isAtomic()) |
| amoInstructions++; |
| else if (decoded_inst->isVector()) |
| vecInstructions++; |
| else if (decoded_inst->isFloating()) |
| fpInstructions++; |
| else if (decoded_inst->isInteger()) |
| intInstructions++; |
| |
| DPRINTF(Fetch, "Instruction extracted from line %s" |
| " lineWidth: %d output_index: %d inputIndex: %d" |
| " pc: %s inst: %s\n", |
| line_in->id, |
| line_in->lineWidth, output_index, fetch_info.inputIndex, |
| fetch_info.pc, *dyn_inst); |
| |
| #if THE_ISA == X86_ISA || THE_ISA == ARM_ISA |
| /* In SE mode, it's possible to branch to a microop when |
| * replaying faults such as page faults (or simply |
| * intra-microcode branches in X86). Unfortunately, |
| * as Minor has micro-op decomposition in a separate |
| * pipeline stage from instruction decomposition, the |
| * following advancePC (which may follow a branch with |
| * microPC() != 0) *must* see a fresh macroop. This |
| * kludge should be improved with an addition to PCState |
| * but I offer it in this form for the moment |
| * |
| * X86 can branch within microops so we need to deal with |
| * the case that, after a branch, the first un-advanced PC |
| * may be pointing to a microop other than 0. Once |
| * advanced, however, the microop number *must* be 0 */ |
| fetch_info.pc.upc(0); |
| fetch_info.pc.nupc(1); |
| #endif |
| |
| /* Advance PC for the next instruction */ |
| TheISA::advancePC(fetch_info.pc, decoded_inst); |
| |
| /* Predict any branches and issue a branch if |
| * necessary */ |
| predictBranch(dyn_inst, prediction); |
| } else { |
| DPRINTF(Fetch, "Inst not ready yet\n"); |
| } |
| |
| /* Step on the pointer into the line if there's no |
| * complete instruction waiting */ |
| if (decoder->needMoreBytes()) { |
| fetch_info.inputIndex += sizeof(TheISA::MachInst); |
| |
| DPRINTF(Fetch, "Updated inputIndex value PC: %s" |
| " inputIndex: 0x%x lineBaseAddr: 0x%x lineWidth: 0x%x\n", |
| line_in->pc, fetch_info.inputIndex, line_in->lineBaseAddr, |
| line_in->lineWidth); |
| } |
| } |
| |
| if (dyn_inst) { |
| /* Step to next sequence number */ |
| fetch_info.fetchSeqNum++; |
| |
| /* Correctly size the output before writing */ |
| if (output_index == 0) { |
| insts_out.resize(outputWidth); |
| } |
| /* Pack the generated dynamic instruction into the output */ |
| insts_out.insts[output_index] = dyn_inst; |
| output_index++; |
| |
| /* Output MinorTrace instruction info for |
| * pre-microop decomposition macroops */ |
| if (DTRACE(MinorTrace) && !dyn_inst->isFault() && |
| dyn_inst->staticInst->isMacroop()) |
| { |
| dyn_inst->minorTraceInst(*this); |
| } |
| } |
| |
| /* Remember the streamSeqNum of this line so we can tell when |
| * we change stream */ |
| fetch_info.lastStreamSeqNum = line_in->id.streamSeqNum; |
| |
| /* Asked to discard line or there was a branch or fault */ |
| if (!prediction.isBubble() || /* The remains of a |
| line with a prediction in it */ |
| line_in->isFault() /* A line which is just a fault */) |
| { |
| DPRINTF(Fetch, "Discarding all input on branch/fault\n"); |
| dumpAllInput(tid); |
| fetch_info.havePC = false; |
| line_in = NULL; |
| } else if (discard_line) { |
| /* Just discard one line, one's behind it may have new |
| * stream sequence numbers. There's a DPRINTF above |
| * for this event */ |
| popInput(tid); |
| fetch_info.havePC = false; |
| line_in = NULL; |
| } else if (fetch_info.inputIndex == line_in->lineWidth) { |
| /* Got to end of a line, pop the line but keep PC |
| * in case this is a line-wrapping inst. */ |
| popInput(tid); |
| line_in = NULL; |
| } |
| |
| if (!line_in && processMoreThanOneInput) { |
| DPRINTF(Fetch, "Wrapping\n"); |
| line_in = getInput(tid); |
| } |
| } |
| |
| /* The rest of the output (if any) should already have been packed |
| * with bubble instructions by insts_out's initialisation */ |
| } |
| if (tid == InvalidThreadID) { |
| assert(insts_out.isBubble()); |
| } |
| /** Reserve a slot in the next stage and output data */ |
| *predictionOut.inputWire = prediction; |
| |
| /* If we generated output, reserve space for the result in the next stage |
| * and mark the stage as being active this cycle */ |
| if (!insts_out.isBubble()) { |
| /* Note activity of following buffer */ |
| cpu.activityRecorder->activity(); |
| insts_out.threadId = tid; |
| nextStageReserve[tid].reserve(); |
| } |
| |
| /* If we still have input to process and somewhere to put it, |
| * mark stage as active */ |
| for (ThreadID i = 0; i < cpu.numThreads; i++) |
| { |
| if (getInput(i) && nextStageReserve[i].canReserve()) { |
| cpu.activityRecorder->activateStage(Pipeline::Fetch2StageId); |
| break; |
| } |
| } |
| |
| /* Make sure the input (if any left) is pushed */ |
| if (!inp.outputWire->isBubble()) |
| inputBuffer[inp.outputWire->id.threadId].pushTail(); |
| } |
| |
| inline ThreadID |
| Fetch2::getScheduledThread() |
| { |
| /* Select thread via policy. */ |
| std::vector<ThreadID> priority_list; |
| |
| switch (cpu.threadPolicy) { |
| case Enums::SingleThreaded: |
| priority_list.push_back(0); |
| break; |
| case Enums::RoundRobin: |
| priority_list = cpu.roundRobinPriority(threadPriority); |
| break; |
| case Enums::Random: |
| priority_list = cpu.randomPriority(); |
| break; |
| default: |
| panic("Unknown fetch policy"); |
| } |
| |
| for (auto tid : priority_list) { |
| if (getInput(tid) && !fetchInfo[tid].blocked) { |
| threadPriority = tid; |
| return tid; |
| } |
| } |
| |
| return InvalidThreadID; |
| } |
| |
| bool |
| Fetch2::isDrained() |
| { |
| for (const auto &buffer : inputBuffer) { |
| if (!buffer.empty()) |
| return false; |
| } |
| |
| return (*inp.outputWire).isBubble() && |
| (*predictionOut.inputWire).isBubble(); |
| } |
| |
| void |
| Fetch2::regStats() |
| { |
| using namespace Stats; |
| |
| intInstructions |
| .name(name() + ".int_instructions") |
| .desc("Number of integer instructions successfully decoded") |
| .flags(total); |
| |
| fpInstructions |
| .name(name() + ".fp_instructions") |
| .desc("Number of floating point instructions successfully decoded") |
| .flags(total); |
| |
| vecInstructions |
| .name(name() + ".vec_instructions") |
| .desc("Number of SIMD instructions successfully decoded") |
| .flags(total); |
| |
| loadInstructions |
| .name(name() + ".load_instructions") |
| .desc("Number of memory load instructions successfully decoded") |
| .flags(total); |
| |
| storeInstructions |
| .name(name() + ".store_instructions") |
| .desc("Number of memory store instructions successfully decoded") |
| .flags(total); |
| |
| amoInstructions |
| .name(name() + ".amo_instructions") |
| .desc("Number of memory atomic instructions successfully decoded") |
| .flags(total); |
| } |
| |
| void |
| Fetch2::minorTrace() const |
| { |
| std::ostringstream data; |
| |
| if (fetchInfo[0].blocked) |
| data << 'B'; |
| else |
| (*out.inputWire).reportData(data); |
| |
| MINORTRACE("inputIndex=%d havePC=%d predictionSeqNum=%d insts=%s\n", |
| fetchInfo[0].inputIndex, fetchInfo[0].havePC, fetchInfo[0].predictionSeqNum, data.str()); |
| inputBuffer[0].minorTrace(); |
| } |
| |
| } |