| /* | |
| * Copyright (c) 2021 Advanced Micro Devices, Inc. | |
| * All rights reserved. | |
| * | |
| * Redistribution and use in source and binary forms, with or without | |
| * modification, are permitted provided that the following conditions are met: | |
| * | |
| * 1. Redistributions of source code must retain the above copyright notice, | |
| * this list of conditions and the following disclaimer. | |
| * | |
| * 2. Redistributions in binary form must reproduce the above copyright notice, | |
| * this list of conditions and the following disclaimer in the documentation | |
| * and/or other materials provided with the distribution. | |
| * | |
| * 3. Neither the name of the copyright holder nor the names of its | |
| * contributors may be used to endorse or promote products derived from this | |
| * software without specific prior written permission. | |
| * | |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" | |
| * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE | |
| * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE | |
| * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE | |
| * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR | |
| * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF | |
| * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS | |
| * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN | |
| * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) | |
| * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE | |
| * POSSIBILITY OF SUCH DAMAGE. | |
| */ | |
| #include "dev/amdgpu/amdgpu_device.hh" | |
| #include <fstream> | |
| #include "debug/AMDGPUDevice.hh" | |
| #include "dev/amdgpu/amdgpu_vm.hh" | |
| #include "dev/amdgpu/interrupt_handler.hh" | |
| #include "dev/amdgpu/pm4_packet_processor.hh" | |
| #include "dev/amdgpu/sdma_engine.hh" | |
| #include "dev/hsa/hw_scheduler.hh" | |
| #include "gpu-compute/gpu_command_processor.hh" | |
| #include "mem/abstract_mem.hh" | |
| #include "mem/packet.hh" | |
| #include "mem/packet_access.hh" | |
| #include "params/AMDGPUDevice.hh" | |
| #include "sim/byteswap.hh" | |
| #include "sim/sim_exit.hh" | |
| namespace gem5 | |
| { | |
| AMDGPUDevice::AMDGPUDevice(const AMDGPUDeviceParams &p) | |
| : PciDevice(p), gpuMemMgr(p.memory_manager), deviceIH(p.device_ih), | |
| sdma0(p.sdma0), sdma1(p.sdma1), pm4PktProc(p.pm4_pkt_proc), cp(p.cp), | |
| checkpoint_before_mmios(p.checkpoint_before_mmios), | |
| init_interrupt_count(0), _lastVMID(0), | |
| deviceMem(name() + ".deviceMem", p.memories, false, "", false) | |
| { | |
| // Loading the rom binary dumped from hardware. | |
| std::ifstream romBin; | |
| romBin.open(p.rom_binary, std::ios::binary); | |
| romBin.read((char *)rom.data(), ROM_SIZE); | |
| romBin.close(); | |
| // System pointer needs to be explicitly set for device memory since | |
| // DRAMCtrl uses it to get (1) cache line size and (2) the mem mode. | |
| // Note this means the cache line size is system wide. | |
| for (auto& m : p.memories) { | |
| m->system(p.system); | |
| // Add to system's device memory map. | |
| p.system->addDeviceMemory(gpuMemMgr->getRequestorID(), m); | |
| } | |
| if (config.expansionROM) { | |
| romRange = RangeSize(config.expansionROM, ROM_SIZE); | |
| } else { | |
| romRange = RangeSize(VGA_ROM_DEFAULT, ROM_SIZE); | |
| } | |
| if (p.trace_file != "") { | |
| mmioReader.readMMIOTrace(p.trace_file); | |
| } | |
| sdma0->setGPUDevice(this); | |
| sdma0->setId(0); | |
| sdma1->setGPUDevice(this); | |
| sdma1->setId(1); | |
| deviceIH->setGPUDevice(this); | |
| pm4PktProc->setGPUDevice(this); | |
| cp->hsaPacketProc().setGPUDevice(this); | |
| cp->setGPUDevice(this); | |
| } | |
| void | |
| AMDGPUDevice::readROM(PacketPtr pkt) | |
| { | |
| Addr rom_offset = pkt->getAddr() & (ROM_SIZE - 1); | |
| uint64_t rom_data = 0; | |
| memcpy(&rom_data, rom.data() + rom_offset, pkt->getSize()); | |
| pkt->setUintX(rom_data, ByteOrder::little); | |
| DPRINTF(AMDGPUDevice, "Read from addr %#x on ROM offset %#x data: %#x\n", | |
| pkt->getAddr(), rom_offset, rom_data); | |
| } | |
| AddrRangeList | |
| AMDGPUDevice::getAddrRanges() const | |
| { | |
| AddrRangeList ranges = PciDevice::getAddrRanges(); | |
| AddrRangeList ret_ranges; | |
| ret_ranges.push_back(romRange); | |
| // If the range starts at zero assume OS hasn't assigned it yet. Do not | |
| // return ranges starting with zero as they will surely overlap with | |
| // another range causing the I/O crossbar to fatal. | |
| for (auto & r : ranges) { | |
| if (r.start() != 0) { | |
| ret_ranges.push_back(r); | |
| } | |
| } | |
| return ret_ranges; | |
| } | |
| Tick | |
| AMDGPUDevice::readConfig(PacketPtr pkt) | |
| { | |
| [[maybe_unused]] int offset = pkt->getAddr() & PCI_CONFIG_SIZE; | |
| DPRINTF(AMDGPUDevice, "Read Config: from offset: %#x size: %#x " | |
| "data: %#x\n", offset, pkt->getSize(), config.data[offset]); | |
| Tick delay = PciDevice::readConfig(pkt); | |
| // Before sending MMIOs the driver sends three interrupts in a row. | |
| // Use this to trigger creating a checkpoint to restore in timing mode. | |
| // This is only necessary until we can create a "hole" in the KVM VM | |
| // around the VGA ROM region such that KVM exits and sends requests to | |
| // this device rather than the KVM VM. | |
| if (checkpoint_before_mmios) { | |
| if (offset == PCI0_INTERRUPT_PIN) { | |
| if (++init_interrupt_count == 3) { | |
| DPRINTF(AMDGPUDevice, "Checkpointing before first MMIO\n"); | |
| exitSimLoop("checkpoint", 0, curTick() + delay + 1); | |
| } | |
| } else { | |
| init_interrupt_count = 0; | |
| } | |
| } | |
| return delay; | |
| } | |
| Tick | |
| AMDGPUDevice::writeConfig(PacketPtr pkt) | |
| { | |
| [[maybe_unused]] int offset = pkt->getAddr() & PCI_CONFIG_SIZE; | |
| DPRINTF(AMDGPUDevice, "Write Config: from offset: %#x size: %#x " | |
| "data: %#x\n", offset, pkt->getSize(), | |
| pkt->getUintX(ByteOrder::little)); | |
| return PciDevice::writeConfig(pkt); | |
| } | |
| void | |
| AMDGPUDevice::dispatchAccess(PacketPtr pkt, bool read) | |
| { | |
| DPRINTF(AMDGPUDevice, "%s from addr %#x size: %#x data: %#x\n", | |
| read ? "Read" : "Write", pkt->getAddr(), pkt->getSize(), | |
| pkt->getUintX(ByteOrder::little)); | |
| pkt->makeAtomicResponse(); | |
| } | |
| void | |
| AMDGPUDevice::readFrame(PacketPtr pkt, Addr offset) | |
| { | |
| DPRINTF(AMDGPUDevice, "Read framebuffer address %#lx\n", offset); | |
| /* Try MMIO trace for frame writes first. */ | |
| mmioReader.readFromTrace(pkt, FRAMEBUFFER_BAR, offset); | |
| /* If the driver wrote something, use that value over the trace. */ | |
| if (frame_regs.find(offset) != frame_regs.end()) { | |
| pkt->setUintX(frame_regs[offset], ByteOrder::little); | |
| } | |
| /* Handle special counter addresses in framebuffer. */ | |
| if (offset == 0xa28000) { | |
| /* Counter addresses expect the read to return previous value + 1. */ | |
| if (regs.find(pkt->getAddr()) == regs.end()) { | |
| regs[pkt->getAddr()] = 1; | |
| } else { | |
| regs[pkt->getAddr()]++; | |
| } | |
| pkt->setUintX(regs[pkt->getAddr()], ByteOrder::little); | |
| } | |
| } | |
| void | |
| AMDGPUDevice::readDoorbell(PacketPtr pkt, Addr offset) | |
| { | |
| DPRINTF(AMDGPUDevice, "Read doorbell %#lx\n", offset); | |
| mmioReader.readFromTrace(pkt, DOORBELL_BAR, offset); | |
| } | |
| void | |
| AMDGPUDevice::readMMIO(PacketPtr pkt, Addr offset) | |
| { | |
| Addr aperture = gpuvm.getMmioAperture(offset); | |
| Addr aperture_offset = offset - aperture; | |
| // By default read from MMIO trace. Overwrite the packet for a select | |
| // few more dynamic MMIOs. | |
| DPRINTF(AMDGPUDevice, "Read MMIO %#lx\n", offset); | |
| mmioReader.readFromTrace(pkt, MMIO_BAR, offset); | |
| switch (aperture) { | |
| case NBIO_BASE: | |
| switch (aperture_offset) { | |
| // This is a PCIe status register. At some point during driver init | |
| // the driver checks that interrupts are enabled. This is only | |
| // checked once, so if the MMIO trace does not exactly line up with | |
| // what the driver is doing in gem5, this may still have the first | |
| // bit zero causing driver to fail. Therefore, we always set this | |
| // bit to one as there is no harm to do so. | |
| case 0x3c: // mmPCIE_DATA2 << 2 | |
| uint32_t value = pkt->getLE<uint32_t>() | 0x1; | |
| DPRINTF(AMDGPUDevice, "Marking interrupts enabled: %#lx\n", value); | |
| pkt->setLE<uint32_t>(value); | |
| break; | |
| } break; | |
| case GRBM_BASE: | |
| gpuvm.readMMIO(pkt, aperture_offset >> GRBM_OFFSET_SHIFT); | |
| break; | |
| case MMHUB_BASE: | |
| gpuvm.readMMIO(pkt, aperture_offset >> MMHUB_OFFSET_SHIFT); | |
| break; | |
| default: | |
| break; | |
| } | |
| } | |
| void | |
| AMDGPUDevice::writeFrame(PacketPtr pkt, Addr offset) | |
| { | |
| DPRINTF(AMDGPUDevice, "Wrote framebuffer address %#lx\n", offset); | |
| Addr aperture = gpuvm.getFrameAperture(offset); | |
| Addr aperture_offset = offset - aperture; | |
| // Record the value | |
| frame_regs[offset] = pkt->getUintX(ByteOrder::little); | |
| if (aperture == gpuvm.gartBase()) { | |
| frame_regs[aperture_offset] = pkt->getLE<uint32_t>(); | |
| DPRINTF(AMDGPUDevice, "GART translation %p -> %p\n", aperture_offset, | |
| bits(frame_regs[aperture_offset], 48, 12)); | |
| gpuvm.gartTable[aperture_offset] = pkt->getLE<uint32_t>(); | |
| } | |
| } | |
| void | |
| AMDGPUDevice::writeDoorbell(PacketPtr pkt, Addr offset) | |
| { | |
| DPRINTF(AMDGPUDevice, "Wrote doorbell %#lx\n", offset); | |
| if (doorbells.find(offset) != doorbells.end()) { | |
| QueueType q_type = doorbells[offset]; | |
| DPRINTF(AMDGPUDevice, "Doorbell offset %p queue: %d\n", | |
| offset, q_type); | |
| switch (q_type) { | |
| case Compute: | |
| pm4PktProc->process(pm4PktProc->getQueue(offset), | |
| pkt->getLE<uint64_t>()); | |
| break; | |
| case Gfx: | |
| pm4PktProc->process(pm4PktProc->getQueue(offset, true), | |
| pkt->getLE<uint64_t>()); | |
| break; | |
| case SDMAGfx: { | |
| SDMAEngine *sdmaEng = getSDMAEngine(offset); | |
| sdmaEng->processGfx(pkt->getLE<uint64_t>()); | |
| } break; | |
| case SDMAPage: { | |
| SDMAEngine *sdmaEng = getSDMAEngine(offset); | |
| sdmaEng->processPage(pkt->getLE<uint64_t>()); | |
| } break; | |
| case ComputeAQL: { | |
| cp->hsaPacketProc().hwScheduler()->write(offset, | |
| pkt->getLE<uint64_t>() + 1); | |
| pm4PktProc->updateReadIndex(offset, pkt->getLE<uint64_t>() + 1); | |
| } break; | |
| case InterruptHandler: | |
| deviceIH->updateRptr(pkt->getLE<uint32_t>()); | |
| break; | |
| case RLC: { | |
| panic("RLC queues not yet supported. Run with the environment " | |
| "variable HSA_ENABLE_SDMA set to False"); | |
| } break; | |
| default: | |
| panic("Write to unkown queue type!"); | |
| } | |
| } else { | |
| warn("Unknown doorbell offset: %lx\n", offset); | |
| } | |
| } | |
| void | |
| AMDGPUDevice::writeMMIO(PacketPtr pkt, Addr offset) | |
| { | |
| Addr aperture = gpuvm.getMmioAperture(offset); | |
| Addr aperture_offset = offset - aperture; | |
| DPRINTF(AMDGPUDevice, "Wrote MMIO %#lx\n", offset); | |
| switch (aperture) { | |
| /* Write a register to the first System DMA. */ | |
| case SDMA0_BASE: | |
| sdma0->writeMMIO(pkt, aperture_offset >> SDMA_OFFSET_SHIFT); | |
| break; | |
| /* Write a register to the second System DMA. */ | |
| case SDMA1_BASE: | |
| sdma1->writeMMIO(pkt, aperture_offset >> SDMA_OFFSET_SHIFT); | |
| break; | |
| /* Write a general register to the graphics register bus manager. */ | |
| case GRBM_BASE: | |
| gpuvm.writeMMIO(pkt, aperture_offset >> GRBM_OFFSET_SHIFT); | |
| pm4PktProc->writeMMIO(pkt, aperture_offset >> GRBM_OFFSET_SHIFT); | |
| break; | |
| /* Write a register to the interrupt handler. */ | |
| case IH_BASE: | |
| deviceIH->writeMMIO(pkt, aperture_offset >> IH_OFFSET_SHIFT); | |
| break; | |
| default: | |
| DPRINTF(AMDGPUDevice, "Unknown MMIO aperture for %#x\n", offset); | |
| break; | |
| } | |
| } | |
| Tick | |
| AMDGPUDevice::read(PacketPtr pkt) | |
| { | |
| if (isROM(pkt->getAddr())) { | |
| readROM(pkt); | |
| } else { | |
| int barnum = -1; | |
| Addr offset = 0; | |
| getBAR(pkt->getAddr(), barnum, offset); | |
| switch (barnum) { | |
| case FRAMEBUFFER_BAR: | |
| readFrame(pkt, offset); | |
| break; | |
| case DOORBELL_BAR: | |
| readDoorbell(pkt, offset); | |
| break; | |
| case MMIO_BAR: | |
| readMMIO(pkt, offset); | |
| break; | |
| default: | |
| panic("Request with address out of mapped range!"); | |
| } | |
| } | |
| dispatchAccess(pkt, true); | |
| return pioDelay; | |
| } | |
| Tick | |
| AMDGPUDevice::write(PacketPtr pkt) | |
| { | |
| int barnum = -1; | |
| Addr offset = 0; | |
| getBAR(pkt->getAddr(), barnum, offset); | |
| switch (barnum) { | |
| case FRAMEBUFFER_BAR: | |
| gpuMemMgr->writeRequest(offset, pkt->getPtr<uint8_t>(), | |
| pkt->getSize()); | |
| writeFrame(pkt, offset); | |
| break; | |
| case DOORBELL_BAR: | |
| writeDoorbell(pkt, offset); | |
| break; | |
| case MMIO_BAR: | |
| writeMMIO(pkt, offset); | |
| break; | |
| default: | |
| panic("Request with address out of mapped range!"); | |
| } | |
| // Record only if there is non-zero value, or a value to be overwritten. | |
| // Reads return 0 by default. | |
| uint64_t data = pkt->getUintX(ByteOrder::little); | |
| DPRINTF(AMDGPUDevice, "PCI Write to %#lx data %#lx\n", | |
| pkt->getAddr(), data); | |
| if (data || regs.find(pkt->getAddr()) != regs.end()) | |
| regs[pkt->getAddr()] = data; | |
| dispatchAccess(pkt, false); | |
| return pioDelay; | |
| } | |
| uint32_t | |
| AMDGPUDevice::getRegVal(uint32_t addr) | |
| { | |
| return regs[addr]; | |
| } | |
| void | |
| AMDGPUDevice::setRegVal(uint32_t addr, uint32_t value) | |
| { | |
| DPRINTF(AMDGPUDevice, "Setting register 0x%lx to %x\n", | |
| addr, value); | |
| regs[addr] = value; | |
| } | |
| void | |
| AMDGPUDevice::setDoorbellType(uint32_t offset, QueueType qt) | |
| { | |
| DPRINTF(AMDGPUDevice, "Setting doorbell type for %x\n", offset); | |
| doorbells[offset] = qt; | |
| } | |
| void | |
| AMDGPUDevice::setSDMAEngine(Addr offset, SDMAEngine *eng) | |
| { | |
| sdmaEngs[offset] = eng; | |
| } | |
| SDMAEngine* | |
| AMDGPUDevice::getSDMAById(int id) | |
| { | |
| /** | |
| * PM4 packets selected SDMAs using an integer ID. This method simply maps | |
| * the integer ID to a pointer to the SDMA and checks for invalid IDs. | |
| */ | |
| switch (id) { | |
| case 0: | |
| return sdma0; | |
| break; | |
| case 1: | |
| return sdma1; | |
| break; | |
| default: | |
| panic("No SDMA with id %d\n", id); | |
| break; | |
| } | |
| return nullptr; | |
| } | |
| SDMAEngine* | |
| AMDGPUDevice::getSDMAEngine(Addr offset) | |
| { | |
| return sdmaEngs[offset]; | |
| } | |
| void | |
| AMDGPUDevice::intrPost() | |
| { | |
| PciDevice::intrPost(); | |
| } | |
| void | |
| AMDGPUDevice::serialize(CheckpointOut &cp) const | |
| { | |
| // Serialize the PciDevice base class | |
| PciDevice::serialize(cp); | |
| uint64_t regs_size = regs.size(); | |
| uint64_t doorbells_size = doorbells.size(); | |
| uint64_t sdma_engs_size = sdmaEngs.size(); | |
| SERIALIZE_SCALAR(regs_size); | |
| SERIALIZE_SCALAR(doorbells_size); | |
| SERIALIZE_SCALAR(sdma_engs_size); | |
| // Make a c-style array of the regs to serialize | |
| uint32_t reg_addrs[regs_size]; | |
| uint64_t reg_values[regs_size]; | |
| uint32_t doorbells_offset[doorbells_size]; | |
| QueueType doorbells_queues[doorbells_size]; | |
| uint32_t sdma_engs_offset[sdma_engs_size]; | |
| int sdma_engs[sdma_engs_size]; | |
| int idx = 0; | |
| for (auto & it : regs) { | |
| reg_addrs[idx] = it.first; | |
| reg_values[idx] = it.second; | |
| ++idx; | |
| } | |
| idx = 0; | |
| for (auto & it : doorbells) { | |
| doorbells_offset[idx] = it.first; | |
| doorbells_queues[idx] = it.second; | |
| ++idx; | |
| } | |
| idx = 0; | |
| for (auto & it : sdmaEngs) { | |
| sdma_engs_offset[idx] = it.first; | |
| sdma_engs[idx] = it.second == sdma0 ? 0 : 1; | |
| ++idx; | |
| } | |
| SERIALIZE_ARRAY(reg_addrs, sizeof(reg_addrs)/sizeof(reg_addrs[0])); | |
| SERIALIZE_ARRAY(reg_values, sizeof(reg_values)/sizeof(reg_values[0])); | |
| SERIALIZE_ARRAY(doorbells_offset, sizeof(doorbells_offset)/ | |
| sizeof(doorbells_offset[0])); | |
| SERIALIZE_ARRAY(doorbells_queues, sizeof(doorbells_queues)/ | |
| sizeof(doorbells_queues[0])); | |
| SERIALIZE_ARRAY(sdma_engs_offset, sizeof(sdma_engs_offset)/ | |
| sizeof(sdma_engs_offset[0])); | |
| SERIALIZE_ARRAY(sdma_engs, sizeof(sdma_engs)/sizeof(sdma_engs[0])); | |
| // Serialize the device memory | |
| deviceMem.serializeSection(cp, "deviceMem"); | |
| } | |
| void | |
| AMDGPUDevice::unserialize(CheckpointIn &cp) | |
| { | |
| // Unserialize the PciDevice base class | |
| PciDevice::unserialize(cp); | |
| uint64_t regs_size = 0; | |
| uint64_t doorbells_size = 0; | |
| uint64_t sdma_engs_size = 0; | |
| UNSERIALIZE_SCALAR(regs_size); | |
| UNSERIALIZE_SCALAR(doorbells_size); | |
| UNSERIALIZE_SCALAR(sdma_engs_size); | |
| if (regs_size > 0) { | |
| uint32_t reg_addrs[regs_size]; | |
| uint64_t reg_values[regs_size]; | |
| UNSERIALIZE_ARRAY(reg_addrs, sizeof(reg_addrs)/sizeof(reg_addrs[0])); | |
| UNSERIALIZE_ARRAY(reg_values, | |
| sizeof(reg_values)/sizeof(reg_values[0])); | |
| for (int idx = 0; idx < regs_size; ++idx) { | |
| regs.insert(std::make_pair(reg_addrs[idx], reg_values[idx])); | |
| } | |
| } | |
| if (doorbells_size > 0) { | |
| uint32_t doorbells_offset[doorbells_size]; | |
| QueueType doorbells_queues[doorbells_size]; | |
| UNSERIALIZE_ARRAY(doorbells_offset, sizeof(doorbells_offset)/ | |
| sizeof(doorbells_offset[0])); | |
| UNSERIALIZE_ARRAY(doorbells_queues, sizeof(doorbells_queues)/ | |
| sizeof(doorbells_queues[0])); | |
| for (int idx = 0; idx < doorbells_size; ++idx) { | |
| regs.insert(std::make_pair(doorbells_offset[idx], | |
| doorbells_queues[idx])); | |
| doorbells[doorbells_offset[idx]] = doorbells_queues[idx]; | |
| } | |
| } | |
| if (sdma_engs_size > 0) { | |
| uint32_t sdma_engs_offset[sdma_engs_size]; | |
| int sdma_engs[sdma_engs_size]; | |
| UNSERIALIZE_ARRAY(sdma_engs_offset, sizeof(sdma_engs_offset)/ | |
| sizeof(sdma_engs_offset[0])); | |
| UNSERIALIZE_ARRAY(sdma_engs, sizeof(sdma_engs)/sizeof(sdma_engs[0])); | |
| for (int idx = 0; idx < sdma_engs_size; ++idx) { | |
| SDMAEngine *sdma = sdma_engs[idx] == 0 ? sdma0 : sdma1; | |
| sdmaEngs.insert(std::make_pair(sdma_engs_offset[idx], sdma)); | |
| } | |
| } | |
| // Unserialize the device memory | |
| deviceMem.unserializeSection(cp, "deviceMem"); | |
| } | |
| uint16_t | |
| AMDGPUDevice::allocateVMID(uint16_t pasid) | |
| { | |
| for (uint16_t vmid = 1; vmid < AMDGPU_VM_COUNT; vmid++) { | |
| auto result = usedVMIDs.find(vmid); | |
| if (result == usedVMIDs.end()) { | |
| idMap.insert(std::make_pair(pasid, vmid)); | |
| usedVMIDs[vmid] = {}; | |
| _lastVMID = vmid; | |
| return vmid; | |
| } | |
| } | |
| panic("All VMIDs have been assigned"); | |
| } | |
| void | |
| AMDGPUDevice::deallocateVmid(uint16_t vmid) | |
| { | |
| usedVMIDs.erase(vmid); | |
| } | |
| void | |
| AMDGPUDevice::deallocatePasid(uint16_t pasid) | |
| { | |
| auto result = idMap.find(pasid); | |
| assert(result != idMap.end()); | |
| if (result == idMap.end()) return; | |
| uint16_t vmid = result->second; | |
| idMap.erase(result); | |
| usedVMIDs.erase(vmid); | |
| } | |
| void | |
| AMDGPUDevice::deallocateAllQueues() | |
| { | |
| idMap.erase(idMap.begin(), idMap.end()); | |
| usedVMIDs.erase(usedVMIDs.begin(), usedVMIDs.end()); | |
| } | |
| void | |
| AMDGPUDevice::mapDoorbellToVMID(Addr doorbell, uint16_t vmid) | |
| { | |
| doorbellVMIDMap[doorbell] = vmid; | |
| } | |
| std::unordered_map<uint16_t, std::set<int>>& | |
| AMDGPUDevice::getUsedVMIDs() | |
| { | |
| return usedVMIDs; | |
| } | |
| void | |
| AMDGPUDevice::insertQId(uint16_t vmid, int id) | |
| { | |
| usedVMIDs[vmid].insert(id); | |
| } | |
| } // namespace gem5 |